Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
ESSENTIAL SOLUTIONS DELIVEREDwww.essentracomponents.com.my
20,000 SOLUTIONS FROM ONE SOURCE
We can make your job easier with 20,000 products, all with industry-leading quality. Time is money, so we make sure we have what you need, when you need it, with 1 billion items in stock and fast despatch.
YOUR MARKETA
SMALL SELECTION FROM OUR RANGE
TELECOMMUNICATION CABINETSIndoor or outdoor cabinets, we can give you the circuit board and cable managements solutions you need, to fit your products.
JUST A FEW OF THE APPLICATIONS WE SERVE:
WHITE GOODSFrom screws to spacers you’ll find thousands of cost-effective, high-quality solutions for your machines.
MEDICALLight to heavy-duty solutions, including products for noise isolation and vibration reduction.
INDUSTRIAL MACHINERY From handles to feet, you’ll find thousands of cost-effective, high-quality solutions for your machines.
GENERATORSLight to heavy-duty solutions, including products for noise isolation and vibration reduction.
ELECTRICAL ENCLOSURESIndoor or outdoor cabinets, we can give you the accessories and security solutions you need to complete your product.
SEE OUR ENTIRE RANGE Get our free catalogue with over 20,000 great solutions
CONTENTSELECTRONICS
Cable Ties and Mounts 02
Cable Wraps 04
Cable Glands 06
PCB Spacers and Other Hardwares 08
LED Spacers 10
Ferrite Cores 12
Fibre Plugs 14
Self-Adhesive Feet 16
Washers and Spacers 18
Screws 20
Riverts and Panel Fasteners 22
Grommets 24
GENERAL MANUFACTURING
Caps and Plugs 26
Hose Protection 28
Pipe and Flange Protection 30
Locks and Hinges 32
Gaskets 34
Handles 36
Machinery Feet 38
Tube Inserts 40
Industrial Wipes 42
2
CABLE TIES AND MOUNTS
Twist Lock
TYPES MAX CABLE TIE WIDTH (mm)
Cable Tie HolderFTH-5/FTH-7/FTH-8/FTH-10/MFTH Series
7.8
Cable Tie HolderFTH-9 Series
4.8
Push Mount Cable HolderFTH-6 Series
6.6
BUNDLE DIMENSION (mm)
Micro Wire Saddle on Adhesive BaseMWSB/MWSEB Series
1.3 to 8.4
Twist LockTL Series
4 to 46
Standard Cable TieSR 1785/SR 1762 Series
22 to 370
Cable Tie with Stainless Steel ToothSR 1792 Series
24 to 102
Locking Beaded TieLBT Series
35.6
Double-Locking Cable TieSR 6105 Series
30 to 230
CABLE TIES AND MOUNTS
StandardCable Tie
Micro WireSaddle
Adjustable Cable Clamps, Blind Hole Mount Cable Ties, Cable Clips, Elastomer Strap, Flat Cable Wire Saddle, Rivet Mount Cable Tie, Releasable Push Mount Ties, Screw Mount Cable Tie Holder, Stainless Steel Cable Tie Installation Tool, Stainless Steel Cable Ties, and more on:
Cable Tie HolderFTH-5/FTH-7/FTH-8/FTH-10/MFTH Series
3
Push MountCable Tie Holder
Cable Tie HolderFTH-9
Cable Ties withStainless Steel
Tooth
FEATURES & BENEFITS
Material/Color: Natural Nylon 6/6, Acrylic (adhesive)Rating: UL94 V-2
Material/Color: Natural Nylon 6/6, Acrylic/Rubber (adhesive) Rating: UL94 V-2. Designed with teeth inside to support cable holding.
Material/Color: Natural Nylon 6/6 Rating: UL94 V-2. Designed to accommodate maximum of 6.6mm cable tie width.
BUNDLE DIMENSION (mm)
Material/Color: Natural Nylon 6/6Rating: UL94 V-0
Material/Color: Natural Nylon 6/6 Rating: UL94 V-2. Apply by twisting to lock and untwisting to unlock.
Material/Color: Natural Nylon 6/6 Rating: UL94 V-2. Cost effective cable and wire management solution.
Material/Color: Black Nylon 6/6 Rating: UL94 V-2. Supplied in 304 stainless steel. Operating temperature -40°C to 85°C.
Material/Color: Natural Nylon 6/6 Rating: UL94 V-2. Locking or tying option. Beads prevent cables or wires from slipping.
Material/Color: Black Nylon 6/6. Double-locking head design that offers secure fastening.
CABLE TIES AND MOUNTS
LockingBeaded Tie
www.essentracomponents.com.my > Cable Ties and Cable Management > Cable Ties and Accessories
Double-Locking Cable Tie
Rivet MountCable Tie
Bind Hole Mount Cable Tie
ElastomerStrap
4
CABLE WRAPS
TYPES MAX BUNDLE (mm) Ø
Rapid Cable WrapSR 1723 Series
6 to 32
Harness WrapHW Series
2.0 – 15.0 to25.0 – 150.0
Spiral WrapHR Series
1.6 – 12.7 to4.8 – 25.4
Hinged Locking Clamps, SHR Clips, Aluminium Heat Reflect Fiberglass Sleeving, Nylon conduit Fittings, Metal Edge Mounting Clip for Corrugated Tube, Corrugated Tubing, Nomex Sleeving, Polyester Self-Closing Wrap, and more on:
Rapid Cable Wrap
DIAMETER (mm)
Heat Shinkable Braided SleevingEHSS Series
Supplied: 10.0 to 70.0Recovery: 5.0 to 35.0
EXPANDABLE RANGE (mm)
Nylon Expandable SleevingEPA Series
Min: 1.0 to 30.0Max: 6.0 to 60.0
CABLE WRAPS
5
FEATURES & BENEFITS
Material/Color: Black Nylon/Polypropylene Rating: UL 94 V-0*. Provides abrasion protection. Allows breakout of cables.
Material/Color: Natural/Black Polyethylene. Provides abrasion protection. Allows breakout of cables.
Material/Color: Natural/Black/Clear Polyethylene/Nylon/Polycarbonate. Right-handed wrap.
www.essentracomponents.com.my > Cable Ties and Cable Management > Conduit and Accessories
Harness WrapSpiral Wrap
Material/Color: Black Polyolefin and Polyester. Excellent abrasion resistance and noise reduction.
Material/Color: Black/Grey Polyamide 6.6. Used to protect wire harness, cable assemblies and fluid pipes.
Hinged Locking Clamp
Nylon ExpandableSleeving
Heat Shrinkable Braided Sleeving
SHR ClipAluminium Heat Reflect Fiberglass
Sleeving
CABLE WRAPS
6
CABLE GLANDS
Nylon Cable Gland
TYPES MOUNTING THREAD SIZE
Nylon Cable GlandSR 1704 Series
- M12 x 1.5 to M63 x 1.5- PG7 to PG48- NPT 3/8” to 1”
Brass Cable GlandSR 1717 Series
Stainless Steel Cable Gland, ATEX Cable Gland, Spiral Cable Gland, and more on:
- M12 x 1.5 to M63 x 1.5- PG7 to PG48- NPT 3/8” to 1”
ATEX Low Voltage Cable GlandSR 6464 Series
M16 x 1.5 to M63 x 1.5
Multi Slot Cable GlandSR 6462 Series
M12 x 1.5 to M40 x 1.5
EMC Cable GlandSR 6266 Series
M12 x 1.5 to M40 x 1.5
Stainless Steel Cable Gland
ATEX Cable Gland
CABLE GLANDS
7
FEATURES & BENEFITS
Material/Color: Nylon 6 Rating: IP68. UL 94 V-0. Locknut and sealing washer available separately.
www.essentracomponents.com.my > Cable Ties and Cable Management > Cable Glands and Accessories
Material/Color: Nickel Plated Brass Rating: IP68. Locknut and sealing washer available separately. CE approved. Temperature range: -20°C + 85°C
Material/Color: Black Polyamide Rating: DIN IP69K/ EN IP68. Certified PTB 05 ATEX 1068 X. Temperature range -40°C to 75°C.
Material/Color: EPDM Rating: IP68. Moulded sealing washer. Temperature range -40°C to 100°C.
Material/Color: Nickel Plated Brass Rating: IP68. Constructed to terminate shielded cable. Temperature range -20°C to 100°C.
Brass Cable Gland
Multi SlotCable Gland
EMC Cable Gland
ATEX Low VoltageCable Gland
CABLE GLANDS
8
PCB SPACERS AND OTHER HARDWARES
TYPES STANDOFF HEIGHT (mm)
Dual Locking SpacerDLCBS Series
4.8 to 22.2
Push SpacerPS Series
Rivet Based Spacer, Self Retaining Spacer, Mini Support Post Self-Treaded Spacer, Metric Low Voltage Insulator, and more on:
4.8 to 22.2
Reverse Locking SpacerRLCBSR/RLCBSRE/RLCBSPR/RCBSE Series
6.4 to 15.9
Specialist SpacerSR 6434 Series
6.4 to 28.5
THREAD HOLE (mm)
Hexagonal Threaded/Metal SpacerSR 6437 Series
M2.5 to M5
M2 to M8
Dual LockingSpacer
PushSpacer
Reverse Locking Spacer
Hex Spacer - Female/FemaleSR 2701 Series
PCB SPACERS AND OTHER HARDWARES
9
FEATURES & BENEFITS
Material/Color: Nylon 6/6 Rating: UL94 V-0/V-2. Both ends lock by hand and wings provide tight fit to board.
www.essentracomponents.com.my > Circuit Board Hardware
Material/Color: Nylon 6/6 Rating: UL94 V-0, V-2. Supports heavy loaded PC board.
Material/Color: Nylon 6/6 Rating: UL94 V-2. Minimum protrusion and inserts from chassis underside.
Material/Color: Nylon 6/6 Secured by a self-tapping screw. Simple Snap-in mounting.
Material/Color: PPS Black Heat resistance up to 200°C.
Material/Color: Nickel Plated Brass Screw-in design.
SpecialistSpacer
Hexagon Threaded / Metal Spacer
Hex Spacer -Female/Female
Rivet Based Spacer
Self RetainingSpacer
Mini Support Post Self-Treaded
Spacer
Metric Low Voltage Insulator
PCB SPACERS AND OTHER HARDWARES
10
LED SPACERS
TYPES FITS LED
LED SpacerLEDS2M Series
T-1 ¾ (5mm)
LED SpacerLEDS1/LEDS2/LEDS3 Series
T-1 (3mm) to T-1 ¾ (5mm)Heights of 2mm to 30mm
High Temperature Metric LED SpacerLEDM Series
T-1 (3mm) to T-1 ¾ (5mm)Heights of 2mm to 30mm
Square LED SpacerSQLEDS Series
T-1 (3mm) to T-1 ¾ (5mm)Heights of 2mm to 30mm
High Temperature Metric LED SpacerLEDM Series
LED SPACERS
11
FEATURES & BENEFITS
Material: Nylon 6/6 Rating: UL94 V-2. Internal tapered dividers prevent lead from shorting. Bottom bosses dissipate heat and easy cleanup.
Material: PVC. Provides height control, lead wire retention and stability.
Material / Color: Black PVC Rating: UL94 V-0. High heat operating temperature.
Material / Color: Black PVC Rating: UL94 V-0. Horizontal or vertical mounting. Good for angled applications.
Square LED SpacerSQLEDS Series
LED SpacerLEDS1/LEDS2/LEDS3 Series
LED SpacerLEDS2M Series
LED SPACERS
0.8 SQ.
More on: www.essentracomponents.com.my > LED Hardware > LED Spacers
12
FERRITE CORES
TYPESHOLE DIMENSION(mm)
Round Cable Core – SplitRKCF Series
6.0 to 14.0
Wound Bead, Multiline Bead and more on:
Round Cable Core – SleeveRRH Series
0.8 to 2
IMPEDANCE (Ω)
25MHZ: 105 to 150100MHZ: 170 to 250
25MHZ: 19 to 272100MHZ: 37 to 340
Toroid CoreRT Series
1.0 to 34.8 25MHZ: 10 to 106100MHZ: 31 to 174
Flat Cable CoreRFS Series
11.0 x 0.7 to 18.7 x 1.1
25MHZ: 10 to 120100MHZ: 40 to 192
Inline BeadRSH Series
5.0 x 5.0 to 11.2 x 11.2
25MHZ: 48 to 437100MHZ: 73 to 592
Round Cable Cores - Sleeve
Toroid Cores
Round Cable Cores - Split
FERRITE CORES
FEATURES & BENEFITS
Material / Color: A5, Black Nylon 6/6 (casing). Use for round cable and easy assembly.
www.essentracomponents.com.my > EMI Suppression Ferrite Cores
13
Material / Color: K5B. Use on wire assemblies and MATV CATV industries.
Material / Color: K5B. Ring configuration provides greater utilization of ferrite properties.
Material / Color: A5/K5B. Use on flat ribbon cables.
Material: K5B. Available in both axial and radial configurations.
Inline Beads
Flat Cable Cores Wound Beads
FERRITE CORES
FIBRE PLUGS
TYPES DIMENSION(mm)
USB Connector PlugCP-USB-B Series
11.8 x 12.4
Blanking PlugBPE Series
12.8 to 25.8 (L)9.3 to 19.1 (W)
RJ Connector PlugCP-RJ Series
10.5 to 12.5
RJ Connector Plug
14 FIBRE PLUGS
FEATURES & BENEFITS
Material / Color: Black Silicon Rubber. Protects USB port.
More on: www.essentracomponents.com.my > Fibre Management > Blanking Plugs and Caps
Material: Nylon 6/6 Rating: UL94 V-2. Covers unused terminals.
Material: Silicon/EPDM. Covers RJ11/RJ45 connector.
USB Connector Plug
Blanking Plug
15FIBRE PLUGS
SELF-ADHESIVEFEET
TYPES BASE DIMENSION(mm)
PTFE Glider Adhesive FixingSR 1461 Series
19.0 to 100.0
Soft Fast Foot, Push On Feet, Threaded Insert Bumper, Saddle and Insert Feet, Machinery Feet, Adjustable Feet, Screw-On Feet, Hexagonal and Rubber Feet, and more on:
Anti-Slip PadASPR/ASPS Series
12.7 to 25.4
Stick-on DiscSR 1577 Series
10.0 to 45.0
Stick-on Feet/BufferSR 1593 Series
6.4 to 45.7
Stick-on Feet / Buffer
16 SELF-ADHESIVE FEET
FEATURES & BENEFITS
Material: PTFE. Available in round, square and rectangular shapes.
www.essentracomponents.com.my > Feet
PTFE Glider Adhesive Fixing
Material / Color: Black Polyethylene foam, closed cells with rubber based pressure sensitive adhesive.
Material / Color: Black rubber. Slip resistant. No scuff marks when removed.
Material / Color: Black/clear/grey/white Polyurethane. Suitable for most smooth and dry surface.
Anti-Slip Pad
Stick-on Disc
17SELF-ADHESIVE FEET
WASHER ANDSPACERS
TYPES DIMENSION (mm)
Transparent WasherSR 1927 Series
Inner Diameters: 2.1 to 8.5Outer Diameters: 4.0 to 18.0Thicknesses: 0.5 to 1.6
Headboard Washer, Retaining Washer, and more on:
Nylon WasherSR 1940 Series
Inner Diameters: 2.2 to 38.0Outer Diameters: 4.8 to 50.0Thicknesses: 0.4 to 3.0
Anti-loss WasherSR 1945 Series
Inner Diameters: 3.2 to 17.0Outer Diameters: 8.0 to 32.0Thicknesses: 0.5 to 3.0
PEEK WasherSR 1929 Series
Inner Diameters: 2.7 to 10.5Outer Diameters: 6.0 to 21.0Thicknesses: 0.5 to 2.0
Finishing WasherSR 1946 Series
Inner Diameters: 2.7 to 8.4Outer Diameters: 6.8 to 22.0Thicknesses: 2.0 to 5.0
Saddle WasherSR 1943 Series
Inner Diameters: 4.2 to 16.5Outer Diameters: 13.0 to 40.0Thicknesses: 5.5 to 12.0
Finishing Washer
18
D
d
H
Nylon Washer
WASHER AND SPACERS
d1 d1
h H H
D D
d d
h
d1 d1
ddH h
D D
Type 1
Type 3
Type 2
Type 4
FEATURES & BENEFITS
Material / Color: Polycarbonate. High transparency.
www.essentracomponents.com.my > Fasteners and Fixings > Washers, Spacers and Bushes
Material / Color: Black/Natural Nylon 6/6 Rating: DIN 125/433/9021. NF E 25-513/25-514
Material / Color: Natural HDPE. Hold screws and nuts in place during assembly.
Rating: UL94 V-0. Light brown. Resistant to most chemical.
Material / Color: Black Nylon 6/6. Excellent insulation properties. High quality finish.
Material / Color: Natural/Black Nylon 6/6. For assembly of crossed round tubes.
Transparent Washer
Anti-loss Washer
19
d
Hd2
d1
Peek Washer
Saddle Washer
WASHER AND SPACERS
SCREWS
TYPES THREAD SIZE(mm)
Hexagonal Head ScrewSR 1901/1992 Series
M2 x 0.4 to M16 x 2.0
Slotted Round Head Screw, Slotted Mushroom Head Screw, Cross Pan Head Screw, Slotted and Phillips Pan Head Screw, Transparent Screw-Crossed Pan Head, Wing Screw, Socket Head Screw, Thumb Screw, Slotted Thumb Screw, and more on:
20
THREAD LENGTH (mm)
4.0 to 100.0
Slotted Cheese Head Screw1903/1904/1951/1952 Series
M2 x 0.4 to M16 x 2.0
4.0 to 80.0
Slotted Countersunk ScrewSR 1967/1910/1909 Series
M2 x 0.4 toM10 x 1.5
4.0 to 60.0
Nylon Metric ScrewNMS Series
M3 to M4 6.4 to 12.1
Flanged Hexagonal Screw with Internal Star DriveSR 1975 Series
M4 x 0.7 toM10 x 1.5
6.0 to 70.0
Knurled ScrewSR 5741 Series
M4 to M6 6.0 to 20.0
Nylon Metric Screw
HexagonalHead Screw
Slotted Round Head Screw
Slotted Mushroom Head Screw
SCREWS
FEATURES & BENEFITS
Material / Color: Natural/Black PVDF/Nylon 6/6 Rating: DIN 931/933. Lightweight. Provides electric insulation.
21
Material / Color: Natural Polypropylene, PVDF/Black/Natural Nylon 6/6 Rating: DIN 84. ISO 1207. Lightweight. Provides electric insulation.
Material / Color: Natural Polypropylene, PVDF/Black/Natural Nylon 6/6 Rating: DIN 963. ISO 2009. Lightweight. Provides electric insulation.
Material / Color: Natural Nylon 6/6 Rating: UL94 V-2. Lightweight. Provides electric insulation.
Material / Color: Natural Nylon 6/6. Lightweight. Provides electric insulation.
Material / Color: Nylon and 30% Glass Fiber. Extra grip. Resistant to numerous fluid & chemical.
Slotted CheeseHead Screw
Slotted CountersunkHead Screw
Knurled ScrewsTransparent Screw-Crossed
Pan Head
Thumb Screw
Slotted Thumb Screw
Flanged HexagonalScrews with Internal Start Drive
SCREWS
www.essentracomponents.com.my > Fasteners and Fixings > Screws and Nuts
RIVETS AND PANEL FASTENERS
TYPESFITS HOLEDIAMETER(mm)
Push RivetSR 1963 Series
3.0 to 8.0
Blind Rivet, Mini Tough Snap Rivet, Folding Leg Rivet, Push Rivet Blunt, Tough Snap Rivet, Screw Rivet, Rack Panel Quarter Turn Fastener, Clear Push Rivet, and more on:
22
PANEL THICKNESS (mm)
1 to 13
Quarter Turn FastenerSR 6268 Series
6.0 to 9.0 4 to 8
Screw Rivet FastenerSR 6269 Series
9.8 to 10.6 1.5 to 10
Snap Rivet “P” TypeSRP Series
3.1 - 3.2 to 4.0 - 4.2
1.5 to 4.5
Snap FastenerSR/SRV0 Series
2.4 - 2.2 to 6.1 - 6.2
0.6 to 10.5
Snap Rivet Heat ResistantSRHR Series
3.1 - 3.2 to 4.1 - 4.2
1 to 8.5
Snap LatchSLG/SLPL/SLPB Series
4.7 – 4.8 to 8.0 - 8.2
1.5 to 5.2
Push Rivet
Quarter Turn Fastener
Snap Fastener
RIVETS AND PANEL FASTENERS
FEATURES & BENEFITS
Material / Color: Black/Natural Nylon. Expands for secure tight fit. Good electrical insulation.
www.essentracomponents.com.my > Fasteners and Fixings > Rivets and Panel Fasteners
23
PANEL THICKNESS (mm)
Material / Color: POM. Lock & unlock by quarter turning head. Cross head quarter turn fastener.
Material / Color: Polymide PA6. Large hold diameter. Unscrew to remove. Push fit install.
Material: Black Polysulfone Rating: UL94 V-1. Withstands temperature up to 155°C.
Material: Nylon 6/6 Rating: UL94 V-0/V-2. Easy installation by hand.
Material: Nylon 4/6 Rating: UL94 V-2. Withstands temperature up to 130°C.
Material: Nylon 6/6 Rating: UL94 V-2. Grommet and mating plunger sold separately.
Screw Rivet Fastener
Snap Rivet "P" Type
Snap Rivet Heat ResistantSnap Latch
Screw Rivet
Folding Leg Rivet
Mini Tough Snap Rivet
Push Rivet Blunt
RIVETS AND PANEL FASTENERS
GROMMETS
TYPES FITS HOLEDIAMETER (mm)
GrommetSR 1703 Series
4.8 to 52.0
Continuous Grommet Strip with Adhesive, Cable Grommet, Metal Continuous Grommet, Grommet Strip, and more on:
24
Standard Grommet – Imperial & MetricSR 1700/1701/1713 Series
1.5 to 48.0
Quick-Fit GrommetSR 1702 Series
10.0 to 28.0
Diaphragm GrommetSR 1705 Series
6.4 to 42.0
Stepped GrommetSR 1709 Series
12.7 to 26.0
Angular Hole GrommetAHG Series
24.0
Grommet
Metal Continuous Grommet
Continuous GrommetStrip with Adhesive
Continuous Grommet
Strip
GROMMETS
FEATURES & BENEFITS
Material / Color: Grey EPDM Rating: IP67. Withstands vibration. Suitable for external applications. Provides dust and watertight seal.
www.essentracomponents.com.my > Cable Ties and Cable Management > Grommets, Strain Relief and Blanking Plugs
25
Material / Color: Black Thermoplastic Rubber/PVC/EPDM. Protects wires and cables through panels. Withstands temperature -40°C to 135°C.
Material / Color: Black PVC/TPE/Silicon Rubber. Snap neatly and quickly into position.
Material / Color: Black PVC/TPE. Thin central film can be pierced to allow a range of different sized wires to pass through.
Material / Color: Black PVC. Stepped sleeve can be cut to requirements. Suit a range of cable diameters.
Material / Color: Black EDPM, 60 Shore. Max angle 45°.
Standard Grommet- Imperial & Metric
SteppedGrommet
Angular HoleGrommet
DiaphragmGrommet
Quick-Fit Grommet
CableGrommet
GROMMETS
Type 1 - Lateral Pull
CAPS AND PLUGS
TYPES DIMENSION (mm) Ø
Tapered Cap/PlugSR 1000 Series
Plug: 4.6 to 162.3Cap: 1.3 to 151.8
26
Push Fit PlugSR 1055 Series
13.2 to 34.5Fit thread: M10 to M36
Threaded PlugSR 1125 Series
Metric: M8 x 1 to M52 x 2.0UNF: 3/8" x 24 to 1 7/8" x 12BSP: 1/8" x 28 to 2" x 11
Threaded CapSR 1126 Series
Metric: M8 x 1 to M52 x 2.0UNF: 1/4" x 28 to 1 7/8" x 12BSP: 1/8" x 28 to 2 1/2" x 11
Push Fit Plug
CAPS & PLUGS
Type 2 - Central Pull
FEATURES & BENEFITS
Material / Color: Red LDPE. Easy fitting and removal. Provides excellent protection from damage, dirt, moisture and corrosion during storage and transportation.
More on: www.essentracomponents.com.my > Caps and Plugs
27
Material / Color: Red LDPE. Patented design. Fit threaded or plain ports. Strong, flexible pull-tab for quick removal.
Material / Color: Yellow HDPE with nitrite rubber. Applicable for BSP/UNF threads. Can be fitted either manually with a power tool or with screwdriver.
Material / Color: Yellow HDPE. Internal neoprene rubber sealing disk limits fluid leakage. Hexagonal head enables the cap to be applied or removed by spanner or socket at a low torque.
CAPS & PLUGS
Tapered Cap/Plug
Threaded Cap
Threaded Plug
Moss Pull Plug(Lateral Pull)
PVC Flexicap
Non-Threaded End Cap
Grease Nipple Cap
Threaded Protection Plug Threaded Protection Cap
HOSE PROTECTION
TYPES BUNDLE DIAMETER (mm)
Fire Protection SleeveSR 6001 Series
10.0 to 50.0
Premium Fire Protection Sleeve, Coloured Spiral Guard®, Hose Protector, Spiral Wrap, Quick Sleeve, Cinch Strap - Standard & Hanging, and more on:
28
Nylon Textile SleeveENSSN Series
17.0 to 93.0
SpiralguardSR 1081 Series
9.0 to 80.0
Spiralguard FRAS SR 1081 Series
13.0 to 80.0
HOSE PROTECTION
Spiralguard
FEATURES & BENEFITS
Material / Color: Red Silicone outer sleeve is self-extinguishing. And 6-micron calcium silicate yarn inner sleeve, has good insulation properties, 700°C service temperature. Its flexible sleeving allows easy application to curved or irregular shapes.
29
Material / Color: Black Nylon. Working temperature -60°C to +125°C. Melting point at 220+10°C.
Material / Color: Black HDPE. Smooth edged, lightweight and high performance material. Excellent recovery memory to maximise the covering of the hose. Exceptional anti-crushing performance. High abrasion resistance.
Material / Color: Black HDPE. Flame Retardant Anti-Static Spiral Guard®. Tested and approved in accordance with the former British Coal specification 182:1986, satisfying the requirements of the non-metallic scheme for use underground. Tested and approved by Mine Safety Laboratory Department of Mineral Resources, NSW to AS2660 FRAS Compliance – 1991. International Standard: ISO 6805.
HOSE PROTECTION
Fire Protection Sleeve
www.essentracomponents.com.my > Hydraulic and Pneumatic Protection > Hose Protection
Nylon TextileSleeve
Spiralguard FRAS
Clinch Strap Plastic Hose Clamp
PIPE AND FLANGE PROTECTION
TYPES DIMENSION Ø
Heavy Duty Recessed CapSR 1370 Series
6.0” to 16.0”DN 150 to DN 400
Flexible Pipe Cap, Pipe Chock, Ribbed Pipe-End Plug, Bolt Hole, Flange Protector, SAE High-Pressure Flange Protector, and more on:
30
Flange ProtectorSR 1355 Series
½” to 3”
Flange Protection DiscSR 1172 Series
½” to 20”DN 10 to DN 600
Face Self Adhesive Disc SR 1361 Series
½” to 32”DN 10 to DN 800
PIPE AND FLANGE PROTECTION
Face Self Adhesive DiscAll custom sizes available. Contact us today!
Full Face Flange Protector SR 1365 Series
DN 10 to DN 250
Cap for Standard Pipe Sizes SR 1358 Series
DN 15 to DN 160
FEATURES & BENEFITS
Material / Color: Black LDPE. Protect pipe bevels and internal walls from corrosion and damage. Accept crane hooks for moving pipes during storage, transit and laying. Resistant to temperatures from -30°C to +60°C.
31
Material / Color: Black LDPE. Protects against dirt, moisture, paint, sand and shot blasting.
Material / Color: PolyCor™ Corrugated LDPE.Rating: DIN Flanges DN 10 to DN 600 - pressure groups PN 6, 10, 16, 25 and 40. ANSI Flanges 1⁄2" to 32" - pressure groups 150, 300, 600 and 900 lbs. Provides simple, cost-effective protection for flanges.
Material / Color: Black rubber. Suits both DIN and ANSI flange specifications. Withstands temperature ranging from - 15°C to +70°C. High resistance to ozone, weather, petrol, oil, non-oxidation acids, and more. All sizes available readily.
PIPE AND FLANGE PROTECTION
Heavy Duty Recessed Cap
www.essentracomponents.com.my > Pipe and Flange Protection
Flange Protector
Material / Color: Yellow LDPE. Designed with flexible fins to support snug fit into bores. Suits flanges to DIN 2627-2638, 150, BS5504 and ANSIB16.5.
Flange Protector Disc Full Face Flange Protector
Material / Color: Yellow LDPE. Wide range of sizes to fit, low cost and high quality. Designed with internal ribs to ensure tight fit. Vent hole option to release pressure build up.
Cap for Standard Pipe Sizes
LOCKS AND HINGES
TYPES GRIP RANGE (mm)
Quarter Turn Latch with SpringSR 5530 Series
8.5 to 24.5
Display Locks, Compression Locks, Latches and Catches, and more on:
32
Heavy Duty Cabinet LockSR 5481 Series
18.5
Heavy Duty Paddle LockSR 5538 Series
140.0 x 110.0 to 140.0 x 120.0
Mini Push to Close Lock SR 5548 Series
86.0 x 73.0
LOCKS AND HINGES
Mini Push to Close Lock
Metal Leaf Hinge SR 5506 Series
40.0 x 40.0 to 76.0 x 50.0
Flat HingeSR 5546 Series
60.0 x 106.0 to 60.0 x 136.0
1.2mm Continuous HingeSR 5590 Series
32.0 x 1016.0 to 38.0 x 1016.0
Concealed HingeSR 5545 Series
32.5 x 60.0 to 39.0 x 65.0
Heavy Duty HingeSR 5744 Series
80.0 x 70.0 to 80.0 x 150.0
Heavy Duty Paddle Lock
Conceal Hinge
Metal Leaf HingeHeavy Duty Cabinet Lock
DIMENSION (mm)
FEATURES & BENEFITS
Material / Color: Die-cast zinc alloy, Chrome plated/Black powder coated/Nylon housingRating: IP 65. Ideal for electrical cabinets and enclosures. 6 head styles and 7 types of grip ranges.
33
Material / Color: Die-cast zinc Alloy, Chrome finished. Specialised fixing plate ensures easy fixing. Flush design provides flat surface on cabinet.
Material / Finish: Black Steel or Polyamide for Body and Handle, Steel or Brass CamRating: IP 54. Lock can be released from inside by moving the cam. Supplied with one key 4444.
Material / Color: Polyamide Body, Die-cast zinc alloy Handle, Acetyl Cam, Steel Mounting Bracket. Suits best for generators with small doors and panels. Provided with two standard Euro keys (5333).
LOCKS AND HINGES
www.essentracomponents.com.my > Locks, Latches, Catches and Hinges
1.2mm Continuous Hinge
Material / Color: Die-cast zinc alloy/Black powder coated/Chrome plated. Stainless Steel Pin. Suits best for flush mounted doors. Maximum rotation at 270°.
Material / Finish: Steel in black coated finish/Die –cast zinc alloy and Delrin Bearing. Stainless Steel Pin.
Material: Steel/304 Stainless. Can be riveted, screwed or welded into position. Ideal for lightweight furniture, cabinet enclosures and sheet metal fabrication.
Material: Zinc plated Steel/Stainless Steel AISI 304. Adaptable for both right and left hand operations. Ideal for metal enclosures and machinery covers.
Material: Die-cast zinc alloy Body, Stainless Steel Pin.
Quarter Turn Latch with Spring
Metal Leaf Hinge
Heavy Duty Hinge Flat Hinge
GASKETS
TYPES CLAMPING RANGE (mm)
PVC Edge ProtectorSR 5557 Series
1.0 to 8.0
Top Bubble Gasket, EMI Gasketing, Weather/Gasketing Strip, and more on:
34
Side Bubble GasketSR 5558 Series
0.5 to 5.0
Dual Flipper Gasket SR 5555 Series
1.0 to 3.0
GASKETS
Sponge Adhesive Seal SR 5561 Series
10.0 x 3.0 to30.0 x 5.0
DIMENSION (mm)
PVC Edge Protector
FEATURES & BENEFITS
Material / Color: Black PVC with Steel Spring Core. Supplied in rolls of 20m. Profiles are flexible and pressed on by hand. Suitable for -40°C to +90°C.
35
Material / Color: Black EDPM. Supplied in rolls of 20m. Clip-on profile offering edge protection and sealing. Offered in 12 types. Profiles are flexible and pressed on by hand.
Material / Color: Black EDPM. Supplied in rolls of 20m. Dual material; hard rubber carrier to improve grip to panel and softer rubber to aid compression. Profiles are flexible and are pressed on by hand.
GASKETS
Side Bubble Gasket
www.essentracomponents.com.my > Gasketing, Toggle Clamps and Enclosure Accessories > Gasketing
Dual Flipper Gasket
Material / Color: Black EDPM. Suits best for metal enclosures. Adhesive for sealing provided. Supplied in 10 m rolls. Easy to apply.
Sponge Adhesive Seal
TYPES LENGTH (mm)
Bridge HandleSR 1534 Series
119.5 to 163.0
36
Machine HandleSR 5534 Series
300.0 to 1000.0
Aluminum Handle SR 5102 Series
100.0 to 350.0
HANDLES
Machine Handle
Pull HandleOval Internal Threads Series
3” to 12”3.94 to 15.75
HANDLES
Flush Handle, Clamping Handle, and more on:
Indexed Clamping HandlesSR 1536 Series
43.0 to 104.0
FEATURES & BENEFITS
Material / Color: Black Nylon 6. Impact-resistant material, yet lightweight and versatile.
37
Material / Color: Polyamide with Steel Bar/Polyamide with aluminum bar/Die-cast zinc alloy in Black or Silver. Strong handle suitable for machine applications.
Material / Color: Silver/Black Aluminum. Five attractive styles.
HANDLES
Aluminium Handle
Material: Aluminum/Brass/SS Available in 7 types of finishing.
Pull Handle
Bridge Handle
www.essentracomponents.com.my > Handles, Knobs and Positioning Components
Material: Glass Filled Nylon 6. Operate by simple lift and rotate action. Easy handle adjustment to safe position.
Indexed Clamping Handle
TYPES THREAD SIZE (mm)
Premium Machinery Mounting FeetSR 1569 Series
M8 to M24
Heavy/Light Duty Fixed Stud Levelling Foot, Hygienic Stainless Steel Machine Mount, Standard Non-Articulating Adjustable Feet, Industrial Articulated Stainless Steel Feet, Adjustable Tilt Glide, All-metal Height Adjuster, Smooth-Based Adjustable Glide, and more on:
38
Standard Machine FeetSR 1545 Series
M8 to M24
Pressed Steel Bolt Down Feet SR 5440 Series
M16 to M20
MACHINERY FEET
Vibration Dampening Machine FeetSR 5443 Series
M16 to M20
Pressed Steel Bolt Down Feet
MACHINERY FEET
Premium Machinery Mounting Feet
Standard Non Articulating Adjustable FeetSR 1572 Series
25.0 to 48.0
Standard Non Articulating Adjustable Feet
THREAD SIZE (mm) FEATURES & BENEFITS
Material / Color: Plain base with Stainless Steel/ENP Mild Steel Stud. Stud manufactured from solid hexagon bar by rolling process ensuring both accuracy and strength of thread. Nylon base offers high-load capacity, chemical resistance and stability during temperature change. 10mm diameter mounting hole.
39
Material: Nylon base with zinc plated Steel Bolt. Ideal for mounting machinery or conveyers. High load bearing capacity. Maximum recommended load; 900Kg. 20° Articulation. Non-Slip Feet.
Material: Galvanised Steel, NBR 80 rubber. High load capacity. 8° articulations. 4 x 12.5mm fixing holes. With or without rubber pad for base. Ideal for conveyors and machines.
MACHINERY FEET
www.essentracomponents.com.my > Feet
Vibration Dampening Machine Feet
Material: Pressed Stainless Steel Type 303 with inset Nitrile rubber core base, Stainless Steel Type 303 stud. 7° Articulations. Vibration resistant. High adhesion to floor. Ideal for machines.
Material/ Color: Black Polypropylene. Outer-Hex Slotted Head for adjustment. POZI socket in base for easy adjustment.
Standard Machine Feet
Anti-Vibration Machine Mounts
Heavy/Ligt Fixed Stud Levelling Foot
Industrial ArticulatedStainless Steel Feet
Rubber FixedFoot
TYPESOUTER DIMENSION(mm)
Ribbed Square InsertSR 1540 Series
12.7 to 150.0
Chrome-Plated Square Insert, Domed Round Insert, Heavy-Duty Round Insert, Angled Rectan-gular Insert, Metal-Pronged Round Insert, Lightweight Square Insert, and more on:
40
Standard Round Ribbed InsertSR 1530 Series
10.0 to 120.0
Ribbed Rectangular Insert SR 1550 Series
25.0 x 12.0 to150.0 x 100.0
TUBE INSERTS
TUBE INSERTS
Threaded InsertSR 1570 Series
M6 to M10
Standard Round Ribbed Insert
THREAD SIZE (metric)
WALLTHICKNESS(mm)
0.8 to 8.0
0.8 to 4.5
0.75 to 8.0
FEATURES & BENEFITS
Material / Color: Black/White/Mid Grey/Dark Grey LDPE. Covers sharp tube edges. Ribbed for easy assembly and secure fitting.
41
Material / Color: Black/White LDPE. Ribbed for easy assembly and secure fitting. Provides protection from sharp tube edges. Ideal for educational and play equipment.
Material / Color: Black/White/Mid Grey/Dark Grey LDPE. Ideal for most popular sizes and gauges of rectangular tubes.
TUBE INSERTS
www.essentracomponents.com.my > Tube Inserts, Connectors and Ferrules
Threaded Insert
Ribbed Rectangular
Ribbed Square Insert
Material: Nylon/HDPE/PP/LDPE. Can be used with either adjustable feet (SR 1572) or adjustable tilt glides (SR 1575). Suitable for wall thickness of 1.0 - 2.0mm.
WALLTHICKNESS(mm)
0.8 to 4.5
Chrome-Plated Square Insert
Metal-Threaded Insert
TYPES WIPE SIZE (inch)
Polyester Wipe7-3400 Series
9 x 9
42
Industrial Wipe7-99C Series
12 x 17
Polyester/Cellulose Wipe7-C1 Series
9 x 9 to12 x 12
INDUSTRIAL WIPES
Polyester/Cellulose Wipe
INDUSTRIAL WIPES
FEATURES & BENEFITS
Material: 100% Polyester. Sealed edge to minimize lint. Perfect for rough surface wiping with chemical. Designed for contamination control.
More on: www.essentracomponents.com.my > Industrial wipes
43
Material: Polyester Cellulose mixed. Quarter fold white creped. Absorbs up to 5 times its own weight.
Material: DuPont Sontara, Hydro-entangled blend of 55% cellulose and 45% polyester. Designed for contamination control. Absorbent, low linting.
INDUSTRIAL WIPES
Industrial Wipe
Polyster Wipe
SEND US YOUR REQUEST TODAY!
Online: www.essentracomponents.com.myor fill up this form and send your request viaFax : +603 6207 3232Email : [email protected]
Please tick ( 4 ) as appropriate.q Please send me a copy of your Catalogueq Please send FREE samples of the parts listed below:q Please send me a quotation of the parts
Part Number Quantity
q Please call me on to discuss my requirements.
Name:
Job Title:
Product Interest:
Company:
Address:
Email:
Tel: Fax:
ESSENTIAL SOLUTIONS DELIVEREDwww.essentracomponents.com.my