8/11/2019 20 Fuel Injection

1/1

3300 MASTERFUEL INJECTION

PRESSURE

TESTER

Checks PFI and TBI systems on

most vehicles. Includes 3-1/2

gauge with dual calibrations(5-145 PSI / 25-1,000 kPa), 2-1/2

gauge with dual calibrations (0-15

PSI and 0-1.00 kg/cm) and com-

plete range of adapters and hose

assemblies.

3350 BASIC FUEL INJECTIONPRESSURE TESTER

Services most USA (except GM TBI)

and Japanese systems. Contains both

large and small Schrader type test

fittings, inline and end of line hose

fittings, 24 hose extension and 3-1/2

(90mm) gauge head with dual

calibration (5-145 PSI / 25 1,000 kPa).

3420 FUEL INJECTION PRESSURE TESTER(BOSCH K JETRONIC C.I.S.)

Detect bad fuel pumps, bad pressure

regulators, leaking injectors and

clogged fuel filters. Includes 3-1/2

(90mm) gauge with dual calibration

(5-145 PSI / 25-1,000 kPa), hose

assembly and brass adapters.

3425 FUEL INJECTION PRESSURE TESTER(NON- BOSCH & GM TBI)

Test Chrysler, Ford, GM (non-TBI),

Japanese makes, Bosch AFC, MPC,

Digijet / Digifant (non-CIS), plus

others using Bendix-type fuel injec-

tion or a Schrader-type valve,

including the small Schrader valve

found on Fords. Includes 3-1/2

(90mm) gauge with dual calibration

(5-145 PSI / 25-1,000 kPa), hose

assembly and brass adapters

3445 FORD/BMW/VOLVO FUELPRESSURE TESTER

Takes fuel pressure on vehicles with the Schrader-type

test port on the fuel rail. Features 3-1/2 gauge

(5 145 PSI / 25 1000 kPa) with quick couplers

attached to both gauge and hose assembly to

allow for additional adapter use.

FUEL INJECTION TOOLS

20

3430 GM FUEL INJECTION TESTERTest vehicles with Multi-port fuel injection.

Features 3-1/2 (90mm) gauge with dual

calibration (5-145 PSI / 25-1,000 kPa) and

hose with quick disconnect.

3435 CHRYSLER FUEL INJECTIONTESTER

Test vehicles with TBI and Multi-port fuel

injection. Features 3-1/2 (90mm) gauge

with dual calibration (5-145 PSI / 25-1,000

kPa) and 3 hose assemblies.

3440 FORD FUEL INJECTION TESTERTest vehicles with Multi-port and TBI systems.

Features 3-1/2 (90mm) gauge with dual

calibration (5-145 PSI / 25-1,000 kPa)

and 3 hose assemblies.

3360 FUEL INJECTION CLEANING CANISTERUse with CTAs Fuel Injection sets and adapters.

Canister is filled with cleaning fluid and

attached to gauge head and adapters to

enter fuel system and injectors. Includes

3-1/2 (90mm) gauge with dual calibration

(5-145 PSI / 25-1,000 kPa) and 5 (1.5m) hose

assembly with 1/8 NPT hose end to adapt

to different fittings. Use with shop air.

3370 FUEL INJECTION CLEANING SETUse with either cleaning hose or

canister with hose assemblies

and fittings for cleaning of injec-

tors on most gasoline engines.

Includes disconnect tools, hose

clamps, tube nuts and application

chart.

3401 8 PC. ELECTRONIC FUELINJECTION TEST KIT

6 EFI testers check if individual injectors are getting proper volt-age or for no-start conditions. Also includes 2 Idle Air Control

testers. All available individually.

No. Application3405 Bosch3410 GM TBI3411 Ford TBI3412 GM PFI3413 GEO TBI3414 GM Vortec SCPIA392 IAC TEST LIGHT GM TBI & PFIA394 IAC TEST LIGHT GM 700 TBI & PFI