2. Specification Guide en 03-2007[1]

Embed Size (px)

Citation preview

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    1/23

    Ind

    ustry

    Sika Facade Systems

    Sealing and Bonding in Facades A Specification Guide

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    2/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    3/23

    7

    3

    9

    2 1 3

    4 5

    Projects on this page:

    1 Peek & Cloppenburg Store,Cologne, Germany

    2 30 St.Mary Axe,London,UK

    3 Zhang J iang Hi-Tec Park,Shanghai,China4 New Exhibition Center Milan, Italy

    5 University of Chicago,USA

    6 J iangsu TelecomBuilding, Nanjing, China

    7 Crystal Tower,Manama,Bahrain

    8 Russia Federation Tower,Moscow,Russia

    9 One Marina Boulevard (NTUC Building), Singapore

    Front page:

    Drugstore Publicis,Paris, France

    Sikas Sealing and Bonding Solutions for Facades in every Climate

    23

    24

    10

    1

    4

    8

    11 201612

    2

    15

    1817

    25

    19

    13

    21

    14

    22

    27

    28

    26

    6

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    4/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    5/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    6/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    7/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    8/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    9/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    10/23

    Thermal Insulation included

    The facades are mainly responsible for the ener-

    gy balance of a building. The excellent thermal

    insulating effect of bonded double or triple

    glazed units with coated glass can save much of

    the energy otherwise consumed for heating or

    cooling.The air trapped between the bonded

    panes is a poor heat conductor and therefore

    forms a good insulating layer between the out-

    door and indoor air.

    The insulating glazing edge seals are predomi-

    nantly made of bent aluminium or stainless steel

    spacers filled with a desiccant,thermoplastic

    polyisobutylene (PIB) as a primary seal and in-

    stallation aid, and an elastic sealant as a sec-

    ondary edge seal.Only high-modulus silicone is

    approved as a secondary seal in structural glaz-

    ing facades.Sikasil IG silicone sealants

    were specifically developed to meet require-

    ments of insulating glazing and feature special

    advantages:

    UV and weathering resistance

    Durability

    Material compatibility

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    11/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    12/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    13/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    14/23

    Sikasil WS-355

    Components one-part

    Curing system neutral

    Skin forming time(23C/50% rel.humidity) [min] ~20

    Permanently elastic range [C] 40 to +150

    Shore A hardness1 ~20

    Tensile strength2 [N/mm2] ~0.47

    Modulus at 100%elongation2 [N/mm2] ~0.28

    Natural Stone Sealing perfect even in sensitive Areas

    Sealants suitable for naturalStones

    Natural stones such as granite,marble and

    sandstone are highly sensitive materials

    when used on facades.Where an inappro-

    priate sealant is used, there may be stain-

    ing of the joint edges or streaking,which

    greatly impairs the optical appearance of

    the facade.Sika therefore recommends

    special system-compatibleSikasil WS

    silicone sealants ideally suited for use with

    extremely sensitive natural stone ele-

    ments,or connecting metal facades and

    curtain walls to natural stone elements.

    They contain no volatile compounds that

    could migrate into the pores of the natural

    stone.We therefore describe them as non-

    staining.These non-staining silicone

    sealants are also recommended for glass

    facades in order to reduce streaking on

    glass panes and metal panels and to mini-

    mize the need to clean the facade.

    Important

    Since all natural stones are verysensitive materials, a on-staining

    test should be carried out at one

    of our Facade Competence Centres

    before any natural stone sealing

    operation.This is an essential pre-

    condition for non-staining warranty.

    1) ISO 868,2) ISO 8339-A.These figures are intended as a guide and should not beused in preparing specifications. For technical information about the products, please

    ask for the latest respective data sheets.

    Gansu Province Finance Bureau,Lanzhou, China

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    15/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    16/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    17/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    18/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    19/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    20/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    21/23

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    22/23

    Sika Facade Systems

  • 8/12/2019 2. Specification Guide en 03-2007[1]

    23/23

    S&W04.07/07SIB16.5/S

    ikaServicesAG,Switzerland

    Customer ServiceSika Engineering Silicones Srl.

    Via L. Einaudi,6

    I-20068 PeschieraBorromeo(MI)

    Phone +39 02 516591205

    Fax +39 02 516591298

    [email protected]

    www.sika.com

    Our most current General Sales Conditions shall apply. Please

    consult the Product Data Sheet prior to any use and processing.

    Sika Facade Systems

    Sealing and Bonding in Facades A Specification Guide

    Technical Service

    Sika Services AG

    Facade Competence Centre

    Tffenwies 16

    CH-8048 Zrich

    Phone +41 56 648 5287

    Fax +41 56 648 5407

    [email protected]

    Sika is a globally active company in the

    speciality and construction chemicals

    business. It has subsidiary manufacturing,

    sales and technical support facilities in

    over 70 countries around the world.

    Sika is THE global market and technology

    leader in waterproofing,sealing,bonding,

    dampening,strengthening and protection

    of buildings and civil engineering structures.

    Sika has more than 11000 employees

    worldwide and is therefore ideally positioned

    to support the success of its customers.

    Sika Your Local Partner with a Global Presence

    Facades by (Project No):Josef Gartner GmbH (3, 5,13, 14, 18, 21, 27); Schmidlin AG(1,2,17, 22, 23); Yuanda (6, 8,19); Cuhadaroglu (11,20, 26);

    Mero (4,25); Alico (7); Compact Metal (9); Inasus (12); Vitro Cristalglass (16);Photos by: Gardin & Mazzoli (14,18); Daniele Domenicali (Front, 3);

    Guy Nowell (13); Beyond Architecture Cultural Development Co Ltd, Mr.Zhou Li (21); Schmidlin AG(1,2,17,22, 23);