2. Occupational safety/Security GENERAL …biotechlab-bg.com/article_files/Izvadki/Furniture.pdf · 2. Occupational safety/Security Furniture/Stairs-Fume hoods GENERAL CATALOGUE EDITION

264

2. Occupational safety/SecurityFurniture/Stairs-Fume hoods

GENERAL CATALOGUE EDITION 18

E & OE.

Safety steps, collapsible- Particularly useful for working in places where there is not a lot of height.- Minimum space requirement for storage and transportation.- Non-slip serrated aluminium treads.- Work comfortably and safely on a large standing surface (treads 360mm wide and 230mm deep).- Side rails made from aluminium extruded profiles for maximum stability.- Stiles made from tubular steel (25mm diameter) with powder-coated surface.- With plastic inserts to prevent slipping.

1

Number of steps

Platform height

Weight PK Cat. No.

m kg23345

0.450.700.70*0.90*1.15*

3.96.68.4

10.612.8

11111

9.704 4059.704 4069.704 4079.704 4099.704 410

* Also equipped with a collapsible safety bar, wide platform and bucket hook.

1

Extraction kits EK 500/1.000/1.500 NEW!NEW!The bench top extractor kit includes FX Original extraction arm(s) with hood or nozzle,fan N3 with speed control and standard filter (particle, HEPA and gas), hose(s),connection details and bench bracket(s).

Fan with speed control and filter element, electric plug: 240V/50Hz Power: 170W, weight fan and filter element:approximately 8 kg, table clamp for extraction arm, connecting hose and accessories: including, temperature range: -10 to +70°C, filtration efficiency: 99.97%, hose: 3 m.

Extraction kit 5001 x fan and filter element, 1 x original extraction arm dia. DN 32 with dome hood and table clamp, length: 1 m,extraction capacity: 42m³/h, incl. connection material

Extraction kit 10001 x fan and filter element, 2 x original extraction arm dia. DN 32 with dome hoods and table clamp, length: 1m each,extraction capacity: 2 x 42m³/h, incl. connection material

Extraction kit 15001 x fan and filter element 3 x original extraction arm diameter DN 32 with dome hoods and table clamp, length: 1meach, extraction capacity: 3 x 38m³/h, incl. connection material

23

Nederman GmbH

Type PK Cat. No.

EK 500EK 1.000EK 1.500

111

9.604 7019.604 7029.604 703

2

9.604 701

3

9.604 702

www.wenk-labtec.com

265

2. Occupational safety/SecurityFurniture/Fume hoods


E & OE.

Extraction kit EK 2.000/2.500/3.000 NEW!NEW!The bench top extractor kit includes FX Original extraction arm(s) with hood or nozzle,fan N3 with speed control and standard filter (particle, HEPA and gas), hose(s),connection details and bench bracket(s).

Fan with speed control and filter element, electric plug: 240V/50Hz Power: 170W, weight fan and filter element: 8kg,table clamp for extraction arm, connecting hose and accessories, extraction arm with optimized flow performance, integrated shut-off valve and cover, temperature range: -10 to +70°C, filtration efficiency: 99.97%

Extraction kit 20001 x fan and filter element, 1 x orig. extraction arm diam. DN 50 with combination hood and table clamp, length: 1.1m,arm connection: below, extraction power: 100m³/h, reduction diam. 75 to 80mm, 3m connecting hose diam. DN 75mmgray, incl. connection material

Extraction kit 25001 x fan and filter element, 2 x orig. extraction arm diam. DN 50 with mini hoods and table clamp, length: 1.1m, armconnection: below, extraction power: 75m³/h each, reduction diam. 100mm, 3m connecting hose diam. DN 100mmgray, t-piece adapter diam. DN 125 - 100, incl. connection material

Extraction kit 30001 x fan and filter element, 1 x orig. extraction arm diam. 75mm diameter with mini hood and table clamp, length:1.1m, arm connection: below, extraction power: 150m³/h, reduction diam. 100mm, 3m connecting hose diam. DN 100 gray, reduction diam. DN 125 - 100, ESD reduction diam. DN 125/75 white, incl. connection material

123

Nederman GmbH

Type PK Cat. No.

EK 2.000EK 2.500EK 3.000

111

9.604 7049.604 7059.604 706

1

9.604 704

2

9.604 705

3

9.604 706

Ductless Fume Hoods Type Ascent Opti™/Ascent Opti™ Basic

Compact, energy saving fume hood without ducting system.

- Independent tested and complies with AFNOR NFX 15-211 standard- Average Inflow Air Velocity: 0.5m/s- Easy Filter change- Sentinel-Microprocessor with LCD-Display, air velocity alarm and 24-hour-clock*- Fluorescent lighting provides superior illumination of the work zone*- Sloped polycarbonate front window- Optional with transparent back wall- Polycarbonate side walls- ISOCIDE™ antimicrobial coating on all painted surfaces minimises contamination.- Stainless steel spill-retaining work top.*- Sampling port- Pass-through ports in the back wall

Hood is delivered unassembled. On-site assembly can be completed in 60 mins. without special tools.

Please order filters separately

More options, support stands, installation on request.

4

Esco

Type Size External dimensions(W x D x H)

PK Cat. No.

mmAscent Opti™ Basic SBP-2A1Ascent Opti™ SPD-3A1Ascent Opti™ SPD-4A1

0.6 m0.9 m1.2 m

542 x 700 x 990840 x 700 x 11251140 x 700 x 1125

111

7.939 1537.939 1617.939 170

* doesn´t apply to Ascent Opti Basic (SPB-2A1)

4

www.wenk-labtec.com

266



E & OE.

Fume hood workstations LABOPUR® H seriesManipulation of liquid chemicals where and when needed.Advantages: eliminates installation costs, saves substantially capital and running costs,mobile and easy to relocate wherever needed; protects the user and environment against toxic fumes.- Low Energy consumption: less than 200KWh /year (for 2100 hours usage)

Choice of two activated charcoal filters (Please order separately!):- „ORG” filter for flammables and organics- „CORG” filter, suitable for the most common laboratory chemicalsOther specific filters (e.g. methanol, hexane, mercury) available on request

Standard equipment:- Built in 15/10 steel, covered with white Epoxy (RAL 9010) with blue stripes- HPL-Worktop (standard) laid on removable retention tank; or tempered glass worktop (optional)- Transparent polycarbonate glazed walls on all four sides for confortable working or lectures- Ergonomic hand traps for convenient manipulation of chemicals- 2 or 4 protective caps for easy usage of external supplies (e.g. power cables, water, gas)- Air velometer; sampling outlet for reactive tube measurement

Recirculating air filter system (CLASS 2) and coal filters Norm NFX 15-211- Noiseless fan: 49dB(A), 220-240V, 50 Hz, 47W, 0.2 A- Air flow: 203m³/h; face velocity: 0.4 to 0.6m/s- Ventilation system with lighting control in case of system failure

Please choose fume hoods, charcoal filters, trolleys and accessories according to your needs. Deliveredmounted.

Further dimensions available on request.

1ECOSAFE

1

Fume hoods LABOPUR® H series2ECOSAFE

Type External dimensions(W x D x H)

Weight PK Cat. No.

mm kgH 200H 300H 400H 1300H 2300H 3500

610 x 620 x 980800 x 620 x 750800 x 620 x 9801000 x 740 x 12001300 x 740 x 12001600 x 740 x 1200

343344607897

111111

4.007 8104.007 8124.007 8144.007 8094.007 8114.007 813

2

Charcoal filters for ductless fume hoods LABOPUR® H seriesCharcoal filter „ORG”: for flammables and organicsCharcoal filter „CORG”: suitable for the most common laboratory chemicals

3ECOSAFE

Type Formodel

PK Cat. No.

ORG200CORG201ORG1300CORG1301CORG3501

H 200H 200H 300, H 400, H 1300, H 2300H 300, H 400, H 1300, H 2300H 3500

11111

4.007 8174.007 8024.007 8164.007 8014.007 804

3

Accessories for Fume hoods LABOPUR® H seriesECOSAFE

Type Description PK Cat. No.

LU20SFA2

Lighting for Fume hoodsFilteralarm with acoustic / visual alarm

11

4.007 8154.007 832

Worktops made from tempered glass available on request.

www.wenk-labtec.com

267



E & OE.

Trolleys for Fume hoods LABOPUR® H seriesTrolley with 1 removable shelf for sitting or standing position. Height without castors:800mm. Height with castors: 860mm.

1ECOSAFE

Type Formodel

Weight PK Cat. No.

kgTR 20TR 34TR 135TR 235TR 335

H 200H 300, H 400H 1300H 2300H 3500

3033373942

11111

4.007 8344.007 8374.007 8334.007 8354.007 836

1

Workstation with deaerated storage cabinet LABOPUR® H series Package

Manipulation and storage in the laboratory: all in one.The storage cabinet is connected to the fume hood in order to extract and absorb thetoxic fumes from both items. The self-contained system provides mobility, security and highly reduces running costs. Noductwork or exhaust system required, no discharge of toxic gases to the environment. No heating or cooling of air.

Technical specifications of the cabinet:- Blue stripes built in steel 15/10, white Epoxy paint (RAL 9010) pictogram ISO 3864, EU 92/58/CEE- Self-closing wing doors, locking system- 1 height-adjustable retention shelf, 1 retention tank- 4 castors (height of castors: 60mm)- Vent grids in the lower part, connection element to the fume hood

LABOPUR® Workstation supplied with:- Ventilated storage cabinet- Fume hood with recirculating air filtration system CLASSE 2, certified Norm NF X 15-211, May 2009- Charcoal filter „CORG”: absorbs inorganic/organic acids vapors and organic preparations and solvents

2

ECOSAFE

Type External dimensions(W x D x H)

Weight PK Cat. No.

mm kgPMSF200PMSF300PMSF400PMSF500PMSF1300

610 x 620 x 1880800 x 620 x 1650800 x 620 x 1880900 x 740 x 21001000 x 740 x 2100

687788

111123

11111

4.007 8264.007 8274.007 8284.007 8294.007 825

2

Safety Cabinets please see page 1360.

Hazardous material workplace Comfort Line GAP.125.12.7- specified workplace limit values are maintained- Ventilation test according to DIN EN 14175-3 (5.4.4)- maximum user safety- made of chemically resistant, anodised aluminium profiles- glazed at the side made from 5mm ESG (tempered safety glass)- highly effective pollutant capture through special, internally mounted fresh air curtain equipment- connecting pieces (DN160) in the ceiling region for connecting to the customer's exhaust air plant

Standard equipment:- integrated, workplace lighting mounted to avoid glare- transparent side panels- fold-away deflector- melamine resin coated rear panel- stainless steel (V2A/1.4301) work plate (vat sealed by welding)- on and off function, exhaust air control and light switch at the lower right front side

3asecos

Dimensions (WxDxH): 1200 x 750 x 1400mm

Description PK Cat. No.

Hazardous material workplace Comfort Line GAP.125.12.7Transparent rear panelUnder frame (H=865 mm)

111

9.840 6279.840 6289.840 588

3

www.wenk-labtec.com

268



E & OE.

Ductless Fume Hoods Type Ascent™ MaxCompact, energy saving fume hood without ducting system.

- Independent tested and comply with AFNOR NFX 15-211 standard- Easy Filter Change- Average Inflow Air Velocity: 0.4m/s- Sentinel-Microprocessor with LCD-Display, air velocity alarm and 24-hour-clock- Fluorescent lighting provides superior illumination of the work zone- Tempered glass sliding sash- Tempered glass side panel- ISOCIDE™ antimicrobial coating on all painted surfaces minimizes contamination.- Stainless steel worktop- Electrical outlets

Other units:- Secondary Backup HEPA filter - suitable when the application involves the generation of biohazardous aerosols in the

work zone- Secondary Backup Carbon filter, offers a higher filtration efficiency against toxic fumes

Please order filters separately.

More options, support stands, installation on request

1Esco

Type Size External dimensions(W x D x H)

PK Cat. No.

mmAscent™ Max ADC-2B1Ascent™ Max ADC-3B1Ascent™ Max ADC-4B1Ascent™ Max ADC-5B1Ascent™ Max ADC-6B1Ascent™ Max ADC-3C1*Ascent™ Max ADC-4C1*Ascent™ Max ADC-5C1*Ascent™ Max ADC-6C1*Ascent™ Max ADC-3E1**Ascent™ Max ADC-4E1**Ascent™ Max ADC-5E1**

0.6 m0.9 m1.2 m1.5 m1.8 m0.9 m1.2 m1.5 m1.8 m0.9 m1.2 m1.5 m

730 x 735 x 14601035 x 714 x 14101340 x 714 x 14101645 x 714 x 14101959 x 714 x 14101035 x 714 x 14601340 x 714 x 14601645 x 714 x 14601950 x 714 x 14601035 x 714 x 14851340 x 714 x 14851645 x 714 x 1485

111111111111

7.939 1747.939 1937.939 1957.939 2047.939 2137.939 2157.939 2237.939 3317.939 3397.939 3517.939 3527.939 353

*secondary filter, charcoal**secondary filter, HEPA

1

Laboratory safety shield, Makrolon®

- with impact-resistant Makrolon® panels- mounted in a metal frame with stable feet to provide a secure stand- centre panel adjustable to four heights- with folding side panels (W:220mm)- full opening possible up to 950mm wide- Makrolon® panels 6mm thick

2Buddeberg

Description Width Height Weight PK Cat. No.mm mm kg

safety shieldadd top section

660660

700250

9.903.65

11

9.005 1329.005 133

2

Flow monitorFor fume cupboards.Indicates if the fume cupboard is switched on.

3Buddeberg

Type PK Cat. No.

Flow monitor 1 9.003 890

3

www.wenk-labtec.com

269

2. Occupational safety/SecurityFurniture/Safety cabinets


E & OE.

Filtration safety cabinets LABOPUR® 12X seriesSafe storage in laboratories and working premices without duct-infrastructure- No ductwork required, no connection to extraction systems needed, very easy to set-up- High filter efficiency due to specially engineered active coal technology- Tested and approved according to Norm NFX 15-211- Protects laboratory users and environment from toxic fumes. Reduces total carbon footprints- Low energy consumption: less than 500KWh per year, approx. filter life: 10 to 12 months- Vertical compartment architecture allows segregated and secure storage

Storage capacity/Number of perforated shelves and retention tanks- AF2X : 140L (140 x 1L or 60 x 2.5L bottles)/4 x shelves, 1 x tank- AF2-2X : 120L (120 x 1L or 56 x 2.5L bottles)/8 x ½-shelves, 2 x ½- tanks- AF4-2X : 280L (280 x 1L or 120 x 2.5L bottles)/8 x shelves, 2 x tanks- AF4-4X : 240L (240 x 1L or 112 x 2.5L bottles)/16 x ½-shelves, 4 x ½ tanks

Equipped with:- Built in 15/10steel, covered with white Epoxy (RAL 9010) with blue stripes- Large glazed door(s) with framing; double air inlet at the bottom- 4 perforated shelves adjustable in height, extractable retentions tanks

Ventilation/filtration system and charcoal filters- According to Norm NFX 15-211- Noiseless fan: 49 dB(A), 220-240V, 50Hz, 47W, 0.2A- Airflow: 203 m³/h, ventilation system with lighting control- Filteralarm: sounding led for control of any airflow irregularities and filter obstruction (optional)

Charcoal filters - please order separately.

1ECOSAFE

Type Description External dimensions(W x D x H)

Internal dimensions(W x D x H)

Weight PK Cat. No.

mm mm kgAF 2XAF 2-2XAF 4-2XAF 4-4X

with 1 partitionwith 2 partitionswith 2 partitionswith 4 partitions

800 x 545 x 1900800 x 545 x 19001600 x 545 x 19001600 x 545 x 1900

780 x 500 x 1660(2x) 380 x 500 x 1660(2x) 780 x 500 x 1660(4x) 380 x 500 x 1660

140150280300

1111

4.007 7964.007 7954.007 7984.007 799

1

Accessories for Filtration cabinets LABOPUR® 12.X seriesECOSAFE

Type Description Dimensions(W x D x H)

PK Cat. No.

mmORG1300CORG1301ESAFESAF2

charcoal filter for 12.X series (organic / flammable materials)charcoal filter for 12.X series (corrosive / flammable materials)additional shelf for AF 2X, AF 4-2Xadditional ½-shelf for AF 2-2X, AF 4-4X

200 x 100 x 400200 x 100 x 400780 x 470 x 20370 x 470 x 20

1111

4.007 8164.007 8014.007 8074.007 808

www.wenk-labtec.com

270



E & OE.

Safety storage cabinets Q-PEGASUS-90 with wing doors

12

3

asecos

SpecificationsOuter dimensions (WxDxH)Q90.195.120.WDAC: 1200 x 615 x 1955 mmQ90.195.060.WDAC: 600 x 615 x 1955 mmInner dimensions (WxDxH)Q90.195.120.WDAC: 1050 x 520 x 1645 mmQ90.195.060.WDAC: 450 x 520 x 1645 mmShelf (WxDxH)Q90.195.120.WDAC: 1043 x 435 x 30 mmQ90.195.060.WDAC: 443 x 435 x 30 mmWeightQ90.195.120.WDAC: 434 kgQ90.195.060.WDAC: 265 kg


Safety storage cabinet Q90.195.120.WDACSafety storage cabinet Q90.195.060.WDACAdditional shelf, 1200mmAdditional shelf, 600mmRecirculating air filter system (option)Ventilation system (option)Plinth panel for Safety storage cabinet Q90.195.120.WDACPlinth panel for Safety storage cabinet Q90.195.60.WDAC

11111111

9.840 6819.840 6829.840 5329.840 5149.840 6509.840 6169.840 7009.840 699

1

9.840 681

2

9.840 682

3

9.840 650

- safe and approved storage of hazardous materials in workrooms- type proved according to EN 14470-1, fire resistance 90 minutes- GS-approved, CE confomal- outer body made of sheet steel, interior with chemical resistant surface, colour: body anthracite grey RAL 7016,

doors light grey (RAL 7035), door colour pure white(RAL 9010) available on request- convenient handling: one-hand operation for double-door cabinets (AGT)- standard door open arrest system holds doors open, safe and convenient storage and removal- serial automatic door closing (TSA) releases arrested doors after approx. 60 seconds. Acoustic andvisual signal before closing

- lockable doors with cylinder lock (integration into a locking system possible), integrated locking state indicator(red/green)

- integrated transport base with removable, optional base cover, easy indoor transport- adjusting aids for compensation for uneven floor- ventilation connection (NW 75)in the cabinet ceiling

Shelves, height adjustable (32 mm increments), load capacity 75 kg (evenly distributed load), bottom collecting sumpwith perforated insert as a first storage level. Capacity bottom collecting sump: 33 litre (model width 1200 mm), 22 litre (model width 600 mm)

Supplied with: Safety Storage Cabinet Q-PEGASUS-90 Model Q90.195.120.WDAC or Q90.195.060.WDAC incl. interiorequipment with 3 shelves, bottom collecting sump with perforated insert

A wide variety of cabinet versions is available. Please enquire.

We can supply this

manufacturer’swhole

product range !

www.wenk-labtec.com

271



E & OE.

Safety storage cabinets S-PHOENIX Vol. 2-90 with folding doorsNEW!NEW!

- safe and approved storage of hazardous materials in workrooms- type proved according to EN 14470-2, fire resistance 90 minutes- GS-approved, CE confomal- outer body made of sheet steel in light grey (RAL 7035), interior with chemical resistant surface- space saving folding doors, less required space in front of the cabinet

while doors are open- convenient handling - one-hand operation for double-door cabinets (AGT))- standard door open arrest system holds doors open, safe and convenient storage and removal- serial automatic door closing (TSA) releases arrested doors after approx. 60 seconds. Acoustic and visual signal

before closing- lockable doors with cylinder lock (integration into a locking system possible)- adjusting aids for compensation for uneven floor- ventilation connection (NW 75)in the cabinet ceiling

Model S90.196.120.FDAC and Model S90.196.060.FDAC with shelves:Shelves, height adjustable (32 mm increments), load capacity 75 kg (evenly distributed load), bottom collecting sumpwith perforated insert as a first storage levelCapacity bottom collecting sump: 33 litre (model width 1200 mm), 22 litre (model width 600 mm)Supplied with: Safety Storage Cabinet S-PHOENIX Vol. 2-90 Model S90.196.120.FDAC or S90.196.060.FDAC incl.interior equipment with 3 shelves, bottom collecting sump with perforated insert

Model S90.196.120.FDAC and Modell S90.196.060.FDAC with drawer:Large storage capacity, optimal to maximize storage space, ideal for the storage of containers < 5 litreModel width 1200 mm: self-closing in the event of fire, load capacity: 60 kg (evenly distributed), capacity 30 litreModel width 600 mm: permanent self-closing, load capacity: 25 kg (evenly distributed), capacity 5 litreSupplied with: Safety Storage Cabinet S-PHOENIX Vol. 2-90 Model S90.196.120.FDAC or S90.196.060.FDAC incl.interior equipment with 6 drawers


12

asecos

SpecificationsOuter dimensions (WxDxH)S90.196.120.FDAC: 1200 x 615 x 1968 mmS90.196.060.FDAC: 600 x 615 x 1968 mmInner dimensions (WxDxH)S90.196.120.FDAC: 1050 x 520 x 1740 mmS90.196.060.FDAC: 450 x 520 x 1740 mmShelf (WxDxH)S90.196.120.FDAC: 1043 x 435 x 30 mmS90.196.060.FDAC: 443 x 435 x 30 mmDrawer (WxDxH)S90.196.120.FDAC: 865 x 510 x 90 mmS90.196.060.FDAC: 345 x 500 x 50 mmWeightS90.196.120.FDAC: 410 kgS90.196.060.FDAC: 265 kg


Safety storage cabinet, S90.196.120FDAC, 3 shelvesSafety storage cabinet, S90.196.120FDAC, 6 drawersSafety storage cabinet, S90.196.60FDAC, 3 shelvesSafety storage cabinet, S90.196.60FDAC, 6 drawersAdditional shelf, 1200 mmAdditional shelf, 600 mmRecirculating air filter system (option)Ventilation system (option)

11111111

9.840 6959.840 6969.840 6979.840 6989.840 5329.840 5149.840 6509.840 616

1

9.840 696

2

9.840 697

www.wenk-labtec.com

272



E & OE.

Safety Storage Cabinets Q-CLASSIC-30 with wing doors NEW!NEW!- safe and approved storage of hazardous materials in workrooms- type proved according to EN 14470-1, fire resistance 90 minutes- GS-approved, CE confomal- outer body made of flame retardant, melamine coated special plates, door front made of sheet steel with structured

paint finish, colour: body anthracite grey (similar to RAL 7016), doors light grey (RAL 7035), door colour pure white(RAL 9010) available on request

- easy handling with comfort: doors stop in any position, self-closing in the event of fire- standard door open arrest system holds doors open, safe and convenient storage and removal- integrated transport base for an easy indoor transport- removable base cover with integrated adjusting aids optional- lockable doors with cylinder lock (integration into a locking system possible)- ventilation connection (NW 75)in the cabinet ceiling

Shelves, height adjustable (32 mm increments), load capacity 75 kg (evenly distributed load), bottom collecting sumpwith perforated insert as a first storage level. Capacity bottom collecting sump: 33 litre (model width 1200 mm), 22 litre (model width 600 mm)Supplied with: Safety Storage Cabinet Q-CLASSIC-30 Model Q30.195.116 or Q30.195.056 incl. interior equipmentwith 3 shelves, bottom collecting sump with perforated insert


12

3

asecos

SpecificationsOuter dimensions (WxDxH)Q30.195.116: 1164 x 615 x 1955 mmQ30.195.056: 564 x 615 x 1955 mmInner dimensions (WxDxH)Q30.195.116: 1050 x 520 x 1645 mmQ30.195.056: 450 x 520 x 1645 mmShelf (WxDxH)Q30.195.116: 1043 x 435 x 30 mmQ30.195.056: 443 x 435 x 30 mmWeightQ30.195.116: 260 kgQ30.195.056: 200 kg


Safety Storage Cabinet Q30.195.116Safety Storage Cabinet Q30.195.056Additional shelf, 1200mmAdditional shelf, 600mmRecirculating air filter system (option)Ventilation system (option)

111111

9.840 6939.840 6949.840 5329.840 5149.840 6509.840 616

1

9.840 693

2

9.840 694

3

9.840 616

Sump liners for asecos safety storage cabinets, PP, PE- Increased protection of drawers when storing mildly aggressive liquids and in case of aleakage

- Removable for safe disposal of leakages and easy cleaning

4 5asecos

For Material PK Cat. No.

for drawers, for safety cabinet of width 1200mmfor drawers, for safety cabinet of width 600mmfor shelves, for safety cabinet of width 1200mmfor shelves, for safety cabinet of width 600mm

PPPPPEPE

1111

9.840 6199.840 6269.840 6129.840 614

4

5

www.wenk-labtec.com

273



E & OE.

Safety Storage Cabinets S-CLASSIC-90 with wing doors- safe and approved storage of hazardous materials in workrooms- type proved according to EN 14470-2, fire resistance 90 minutes- GS-approved, CE confomal- outer body made of sheet steel, colour light grey (RAL 7035), interior with chemical resistant surface- lockable doors with cylinder lock (integration into a locking system possible)- adjusting aids for compensation for uneven floor- ventilation connection (NW 75)in the cabinet ceiling- standard door open arrest system holds doors open, safe and convenient storage and removal

Shelves, height adjustable (32 mm increments), load capacity 75 kg (evenly distributed load), bottom collecting sumpwith perforated insert as a first storage level. Capacity bottom collecting sump: 33 litre (model width 1200 mm), 22 litre (model width 600 mm).Supplied with: Safety Storage Cabinet S-CLASSIC-90 Model S90.196.120.WDAS or S90.196.060.WDAS incl. interiorequipment with 3 shelves, bottom collecting sump with perforated insert


1

asecos

SpecificationsOuter dimensions (WxDxH)S90.196.120.WDAS: 1200 x 615 x 1968 mmS90.196.060.WDAS: 600 x 615 x 1968 mmInner dimensions (WxDxH)S90.196.120.WDAS: 1050 x 520 x 1740 mmS90.196.060.WDAS: 450 x 520 x 1740 mmShelf (WxDxH)S90.196.120.WDAS: 1043 x 435 x 30 mmS90.196.060.WDAS: 443 x 435 x 30 mmWeightS90.196.120.WDAS: 410 kgS90.196.060.WDAS: 265 kg


Safety Storage Cabinets S90.196.120.WDASAdditional shelf, 1200mmSafety Storage Cabinets S90.196.060.WDASAdditional shelf, 600mmRecirculating air filter system (option)Ventilation system (option)

111111

9.840 6899.840 5329.840 6909.840 5149.840 6509.840 616

1

9.840 690

Cabinets for acids and alkalis SL-CLASSIC with wing doorsNEW!NEW!

- safe and approved storage of aggressive, non-flammable hazardous materials inworkrooms

- robust construction and longevity, safety elements assembled outside the storage compartment for increasedprotection against corrosion, easy to clean

- safe storage with two hermetically separated storage compartments- doors lockable with cylinder locking (integration in locking system possible)- integrated adjusting aids to compensate for uneven floor- integrated metal-free air ducts ready for connection (NW 75) to a technical exhaust system with only one extraction

air Inlet- pull-out shelves: high quality and sturdy construction with removable plastic sump, load capacity 25 kg (evenly

distributed load), capacity 15 litre

Supplied with: Cabinet for acids and alkalis SL-CLASSIC incl. interior equipment, Model SL.196.120.MV with 8 or 12pull-out shelves, Model SL.196.060.MH with 4 or 6 pull-out shelves


2

3

asecos


Cabinets for acids and alkalis SL.196.120.MV, 8 pull-out shelvesCabinets for acids and alkalis SL.196.120.MV, 12 pull-out shelvesCabinets for acids and alkalis SL.196.060.MH, 4 pull-out shelvesCabinets for acids and alkalis SL.196.060.MH, 6 pull-out shelves

1111

9.840 6919.840 7019.840 6929.840 702

2

9.840 691

3

9.840 692

www.wenk-labtec.com

274



E & OE.

Fire Resistant Gas Cylinder Cabinets G90 series- colour: grey RAL 7035- exhaust air connection (NW75) on top of the cabinet- adjusting aids to compensate for uneven floor- large interior height of 1858mm (Model for two 10 litre bottles interior height of 1246mm)- lead-through points for pipes, sensors etc. in the ceiling of the cabinet- complete with mounting rails, rolling ramp, bottle retainer with ratchet straps

Approved and safe- labelling in accordance with EN 14470-2, fire resistance 90 minutes- GS approved, CE compliant

1

2

3

asecos

Description Weight Dimensions(W x D x H)

PK Cat. No.

kg mmfor two 10 litre bottlesfor one 50 litre bottlefor two 50 litre bottlesfor three 50 litre bottlesfor four 50 litre bottlesfor four 50 litre bottlesVentilation system (option)

278365365490610690

600 x 615 x 1450600 x 615 x 2050600 x 615 x 2050900 x 615 x 20501200 x 615 x 20501400 x 615 x 2050

1111111

6.252 0689.840 6109.840 6519.840 6099.840 6089.840 6079.840 616

1

9.840 607

2

9.840 651

3

6.252 068

Gas cylinder regulatorsTo EN ISO 2503. Valve body and cap made of high quality, hot-pressed brass. Provide sensitive adjustment of workingpressure. Safety valve blows off upwards.

4

Type Pressure PK Cat. No.bar

OxygenAcetyleneCarbon dioxideCompressed airCompressed airHydrogenHydrogenNitrogenNitrogenPropanePropane with 1 pressure gaugeHeliumTest gasNitrous oxide

0 to 10 / 160 to 1.5 / 2.50 to 10 / 160 to 10 / 160 to 20 / 400 to 1.5 / 2.50 to 10 / 160 to 10 / 160 to 20 / 400 to 1.5 / 2.50 to 1.5 / 2.50 to 10 / 160 to 10 / 160 to 10 / 16

11111111111111

9.223 7019.223 7059.223 7109.223 7219.223 7229.223 7309.223 7319.223 7419.223 7429.223 7519.223 7529.223 7569.223 7719.223 791

4

Gas cylinder supportsFor holding gas cylinders up to 230mm diameter in a vertical position.For benches/worktops up to 65mm thick.Rapid release, safety catch.

5

Type PK Cat. No.

Gas cylinder support 1 7.605 462

5

www.wenk-labtec.com

275



E & OE.

Cabinets for chemicals CS-CLASSIC with wing doorsNEW!NEW!

- safe and approved storage of non-flammable chemicals and toxic substances inworkrooms

- robust construction and longevity, body made of sheet steel with high grade structured paint finish, colour: bodyanthracite grey RAL 7016, doors light grey (RAL 7035), door colour pure white(RAL 9010) available on request

- doors lockable with cylinder locking (integrated in the turning handle)- integrated adjusting aids to compensate for uneven floor- reduction of odours inside the cabinet with natural ventilation due to vent openings at the cabinet bottom- doors optional with large glas openings for an optimal view on stored chemicals while doors are closed- interior equipment sheet steel galvanised, pull-out shelf with sump made of PE

Shelves, height adjustable (25 mm increments), bottom collecting sump with perforated insert as a first storage level.Shelf load capacity (evenly distributed load): 100 kg (model width 1055 mm), 50 kg (model width 545 mm). Capacitybottom collecting sump: 33 litre (model width 1105 mm), 22 litre (model width 545 mm).

Supplied with: Cabinet for chemicals CS-CLASSIC Model CS.195.105 or CS.195.054 incl. interior equipment with 3 shelves, bottom collecting sump with perforated insert as a first storage area


12

asecos

SpecificationsOuter dimensions (WxDxH)CS.195.105: 1055 x 520 x 1950 mmCS.195.054: 545 x 520 x 1950 mmInner dimensions (WxDxH)CS.195.105: 996 x 496 x 1835 mmCS.195.054: 486 x 493 x 1835 mmShelf (WxDxH)CS.195.105: 993 x 492 x 30 mmCS.195.054: 484 x 492 x 30 mmWeightCS.195.105: 68 kgCS.195.054: 46 kg


Cabinet for chemicals CS.195.105Cabinet for chemicals CS.195.054

11

9.840 6879.840 688

1

9.840 687

2

9.840 688

Multifunctional recirculating air cabinets

FlameFlex - fire resistant storage of most different flammable chemicals

ChemFlex - storage of most different non-flammable chemicals

FlameFlex/ChemFlex recirculating air system with filtration,including• multi-stage filter system, connection cable and connector• integrated electronic (VDE-tested) for monitoring of the exhaust air and filter• visual and acoustic alarm incl. potential-free alarm contact• active personal protection – safe capture of vapours that are harmful to health in the cabinet interior• no on-site exhaust air system necessary

Available from 2014For information material, please register at www.asecos.com

FlameFlex / ChemFlex

www.wenk-labtec.com

THE NEW SYSTEMLABOR

EXPLORIS – A NEW DIMENSION IN SAFETY, INTELLIGENCE AND EFFICIENCY

Discover EXPLORIS: the next generation of Systemlabor. Enhanced modular design now provides maximum

fl exibility to perfectly adapt to your needs. State-of-the-art technologies o� er new dimensions in safety and

e� ciency. Meticulously designed and incorporating many innovative features, EXPLORIS has been created to

encourage maximum e� ciency in all laboratory processes. Quality is not just a promise with us - all Köttermann

products now carry an industry-leading guarantee up to 20 years.

130611_Kötter_13190_imageanzeige_DE_EN_RZ.indd 1 11.06.13 12:14

www.wenk-labtec.com

KÖTTERMANN GMBH & CO KG

Industriestraße 2-10D-31311 Uetze / HänigsenPhone +49 5147 976-0Fax +49 5147 976-844

[email protected]

More information? Simply request a catalogue at www.koettermann.com

130611_Kötter_13190_imageanzeige_DE_EN_RZ.indd 2 11.06.13 12:14

www.wenk-labtec.com

Documents

2. Occupational safety/Security GENERAL …biotechlab-bg.com/article_files/Izvadki/Furniture.pdf · 2. Occupational safety/Security Furniture/Stairs-Fume hoods GENERAL CATALOGUE EDITION