[IA] Iterative Advancement Devices❑ [IA] Series A Advancements 0.0, 1.0, 2.0, 3.0 (mm) + UA (default)❑ [IA] SELECT Series A Advancements 0.0, 1.0, 2.0, 3.0 (mm)❑ [IA] SELECT Series A + UA

[CA] Continuous Advancement Devices❑ [CA] LP (NEW!)❑ [CA] Standard

[PH] Precision Herbst-style Device❑ [PH] Standard

(Optional Add-On)

[MOG] Morning Occlusal Guide with Device❑ [MOG]: Design includes an anterior bite ramp. m Qty. 1 m Qty. 2 (default)

❑ [MOG] MIP: Design enables true, full occlusal contact. m Qty. 1 m Qty. 2 (default)

❑ Additional Arches (please specify below)

________________________________________________________________

844 537 5337ProSomnus.com

Mad

e in th

e US

A. P

roS

om

nu

s® is a R

egistered Trad

emark. N

OT

E: P

lea

se u

se b

lue

or b

lack in

k wh

en

com

ple

ting

this fo

rm. P

RO

3-1

29

-E

engineered for: Comfort, Simplicity, Biocompatibility, Durability, Predictability

Leader In Precision OAT®

_______________________________________________________________________

_______________________________________________________________________

_______________________________________________________________________

_______________________________________________________________________

❑ Backup Device

❑ [IA] Sample Model

❑ [IA] SELECT Sample Model

❑ [CA] LP Sample Model

❑ [PH] Standard Sample Model

❑ [MOG] Sample Model

❑ [MOG] MIP Sample Model

❑ ProSomnus Sleep Device Rx’s

❑ Shipping Boxes

❑ Patient Education Brochures

❑ George Gauge Kit

❑ 3.0mm Bite Forks

❑ 3.0mm Digital Bite Forks

❑ ProSomnus [PH] ProKit

❑ ProSomnus [PH] Wrenches

❑ Extra Carrying Case

5860 West Las Positas Blvd., Ste. 25Pleasanton, CA 94588

ProSomnus® Sleep & Snore Devices Combined RxCLEARED PATENTED

Supplies

Special Instructions

S

3

See back for descriptions, terms and conditions.

Optional: Please indicate teeth for block out using the chart below (no device retention).

Standard design default if left blank. Splint Coverage❑ Full Lingualess❑ Full Lingual Coverage❑ Lingualess Anterior with Full Posterior Coverage❑ Tapered Posterior❑ No Distal Wrap Coverage

Post Design❑ 70° Dual Posts (not available for SELECT, CA, PH)❑ 90° Non-Radius Dual Posts (not available for PH) Other Customizations❑ Anterior Airway (2.0mm default) ❑ Anterior Discluder (4.0mm default) ❑ Metal-Free Hooks (not available for SELECT)❑ No Upper Comfort Bumps on [PH]❑ No Lower Comfort Bumps on [PH]Optional features available for [IA] and [PH] unless otherwise noted. Design may be limited due to patient anatomy.

Sleep Device Monogram™ Customization1 2

Case Info

__________________________ _______________________________DR. NAME (Required) CASE DUE DATE (Required)

__________________________ _______________________________SIGNATURE OF DENTIST (Required) DENTIST LICENSE# (Required) Person signing this authorization accepts sole responsibility for payment and agrees to pay all legal and collection costs in the event of suit, including reasonable fees. Dentist’s signature will authorize ProSomnus® Sleep Technologies to construct, alter or repair the device described on this requisition.

__________________________________ ACCOUNT#

_____________________________________________________________DR. ADDRESS (Required) __________________________ __________________________________DR. PHONE (Required) DR. EMAIL (Required)

_____________________________________________________________ PATIENT NAME (Required)

Note: Turnaround time is 7 days + shipping. Call for a rush request. Rush fee will apply. Incomplete Rx information or technical evaluations may result in an increased turnaround time.

❑ OK to open bite as required for design.

1 m

2 m

3 m

4 m

5 m m 12

m 13

m 14

m 15

m 16

6 m m 11 7 m m 10

8 m m 9

Upper Arch

m 1732 m

m 1831 m

m 1930 m

m 2029 m

m 2128 mm 22

23242526

27 m

Lower Arch

m m m m

E0486 VERIFIED

ProSomnus devices require 3.0mm of clearance at the lowest cusp point. The diagram below shows how to visualize the amount of space required.

Doctors have been reported using several additional techniques when issues arise to make sure they have enough clearance: • Moving the bite fork to include dangling cusps. • Modifying the bite fork to capture dangling cusps. • Adding material to the incisal guide area to open the vertical more.• Measuring with a caliper in the bicuspid and molar areas.• Shortening the device when there is an excessive Curve of Spee.

DIGITAL IMPRESSION POLICY: ProSomnus® Sleep Technologies receives digital impressions. For quality assurance purposes, sleep devices made from digital impressions are fit against a 3D printed model of the digital impression. We strongly recommend if sending digital impressions to also send a digital bite, rather than physical to avoid manufacturing delays. If sending a physical bite with digital impressions, please notify Digital@ProSomnus.com or notate when submitting files.WARRANTY: ProSomnus 100% guarantees the workmanship and materials of this device. ProSomnus’ service warranty can be found at ProSomnus.com (Terms and Conditions section). DISCLAIMER: ProSomnus cannot warrant against customer dissatisfaction due to diagnosis, treatment decisions, style, or brand of device chosen. We’re happy to assist you with any device adjustments and/or modifications, and to provide you with any information you may need to learn about the use of these devices. OUR PROMISE TO YOU: Upon incoming examination of your case, if the ProSomnus manufacturing team determines that there is not enough bite clearance, nor enough retention to accommodate the standard design, we will NOT make changes without your knowledge or authorization unless noted in your preferences. Our manufacturing process will be temporarily stopped until we are able to contact you for a consultation regarding design alternatives that you prefer and prescribe. The ProSomnus Sleep & Snore Devices are FDA cleared and registered Medical Devices.

ProSomnus [IA] Standard ProSomnus Monogram Customization Options

3.0mm 3.0mm3.0mm3.0mm

ProSomnus Sleep Device Bite Requirement

Policy Guidelines

ProSomnus [IA] SELECT

ProSomnus [CA] LP ProSomnus [PH] Standard

METAL-FREE HOOKS

FULL LINGUALESS

TAPERED POSTERIOR

FULL LINGUALCOVERAGE

ANTERIOR AIRWAY

DUAL 70°RADIUS POSTS

ProSomnus [IA] Standard Default Design Includes: Lingualess AnteriorCoverage; Full Posterior Coverage; Distal Wrap Coverage; Dual 90° Radius Posts; Flat Plane Splint Design; ProSomnus [UA] Unlimited Advancement Arches. Device starting position is set at bite when delivered.

ProSomnus [IA] SELECT Standard Default Design Includes: LingualessAnterior Coverage; Full Posterior Coverage; Distal Wrap Coverage; Dual 90° Radius Posts; Flat Plane Splint Design. NOTE: The SELECT device is recom-mended for patients with challenged lip competency with less than 5.0mm of anticipated advancement. Device starting position is set at bite when delivered.

ProSomnus [CA] LP Default Design Includes: 1 Upper [CA] Arch; 1 Lower (L0) Arch; 1 Lower (L3) Arch; Lingualess Anterior Coverage; Full Posterior Coverage; Tapered Posts; Flat Plane Splint Design with Lingual and Labial Anatomical Scalloping. Device starting position is set at bite when delivered.

ProSomnus [PH] Standard Default Design Includes: Lingualess Anterior Coverage; Full Posterior Coverage; Distal Wrap Coverage; Dual 90° Radius Posts; Flat Plane Splint Design. NOTE: The SELECT device is recommended for patients with challenged lip competency with less than 5.0mm of anticipated advancement. Device starting position is set at bite when delivered.

ANTERIOR DISCLUDER

DUAL 90°NON-RADIUS POSTS

ACCOUNT: DR NAME Required: CASE DUE DATE Required: DR ADDRESS Required: DENTIST LICENSE Required: DR PHONE Required: DR EMAIL Required: PATIENT NAME Required: IA Series A Advancements 00 10 20 30 mm UA default: OffIA SELECT Series A Advancements 00 10 20 30 mm: OffIA SELECT Series A UA: OffCA LPNEW: OffCA Standard: OffFull Lingualess: OffFull Lingual Coverage: OffLingualess Anterior with Full: OffTapered Posterior: OffNo Distal Wrap Coverage: Off70 Dual Posts not available for SELECT: Off90 NonRadius Dual Posts: OffMOG Design includes an anterior bite ramp: OffMOG MIP Design enables true full occlusal contact: OffAdditional Arches please specify below: OffAnterior Airway 20mm default: OffAnterior Discluder 40mm default: OffMetalFree Hooks not available for SELECT: OffNo Upper Comfort Bumps on PH: OffNo Lower Comfort Bumps on PH: OffBackup Device: OffIA Sample Model: OffIA SELECT Sample Model: OffCA LP Sample Model: OffPH Standard Sample Model: OffMOG Sample Model: OffMOG MIP Sample Model: OffProSomnus Sleep Device Rxs: OffShipping Boxes: OffPatient Education Brochures: OffGeorge Gauge Kit: Off30mm Bite Forks: Off30mm Digital Bite Forks: OffProSomnus PH ProKit: OffProSomnus PH Wrenches: OffExtra Carrying Case: OffPH Standard: Offundefined: undefined_2: Off3 1: