Upload
gigis-kintan-myarthaluna
View
12
Download
1
Embed Size (px)
DESCRIPTION
kp
Citation preview
Practical Work Report PT. Halliburton Wireline & Perforating
APPROVAL SHEET
FDI ( FLUID DENSITY INERTIAL ) INSTRUMENT STUDY FOR CASED-HOLE LOGGING PROCESS IN PT. HALLIBURTON WIRELINE & PERFORATING,
TAMBAK SAWAH- SIDOARJO
(July 15th 2014 – August 25th 2014)
Winda Cynthia Dewi 2411 100 087
Has completed MK TF 091 274 Engineering Ethics and Work Practice in accordance with
the syllabus in the curriculum 2009/2014 - Graduate Program..
Sidoarjo, August 2014
Perceive,
Field Services Coordinator Halliburton
W&P Surabaya
Pamudji Raharjo
Supervisor of
Internship Program/ Maintance Coordinator
Oscar Ongkokusumo
Surabaya, August 2014
Perceive,
Head of Engineering Physics Department
Dr.Ir. Totok Soehartanto, DEA
NIP. 19650309 1990021001
Educational Advisor
Dr. Ir. Aulia Siti Aisjah, M.T.
NIP. 196601161989032001
Jurusan Teknik Fisika- FTI- ITS ii
Practical Work Report PT. Halliburton Wireline & Perforating
COMPANY APPROVAL SHEET
PRACTICAL WORK REPORT
PT. HALLIBURTON WIRELINE & PERFORATING
TAMBAK SAWAH - SIDOARJO
July 15th 2014 – August 25th 2014
FDI ( FLUID DENSITY INERTIAL ) INSTRUMENT STUDY FOR CASED-HOLE LOGGING PROCESS IN PT. HALLIBURTON WIRELINE & PERFORATING,
TAMBAK SAWAH- SIDOARJO
Compiled by:
Winda Cynthia Dewi (2411 100 087)
Approved,
Field Services Coordinator Halliburton
W&P Surabaya
Pamudji Raharjo
Supervisor of
Internship Program/ Maintance Coordinator
Oscar Ongkokusumo
Jurusan Teknik Fisika- FTI- ITS iii
Practical Work Report PT. Halliburton Wireline & Perforating
STUDY INSTRUMENT FDI (FLUID DENSITY INERTIAL) TOOL FOR PROCESS IN CASED-HOLE LOGGING IN HALLIBURTON WIRELINE &
PERFORATING, TAMBAK SAWAH- SIDOARJO
Name of Student : Winda Cynthia DewiNRP : 2411 100 087Department : Engineering Physics
Abstract
Halliburton is one of the largest oil service company in the world, operating in over 80
countries, has branches in various places, especially in Indonesia. One branch of this
company is part of Halliburton Wireline and Perforating unit that prepares Surabaya
Logging and Perforating activities in the area of operation for the user. One of the tools
used in the logging process is FDI (Fluid Density Inertial) which is used to measure the
density of the oil in the wellbore. Logging results will be evaluated whether the area has an
appropriate quality oil or not the economic value to be gained. The working principle of
FDI is the liquid density measurement using a tuning fork sensor will oscillate according
naturalnya frequency, while the fluid (oil) here serves as a vibration damper that will result
will be sent via telemetry in the form of frequency and found the density of oil in the area.
Keywords : Halliburton, FDI, Tuning Fork
Jurusan Teknik Fisika- FTI- ITS iv
Practical Work Report PT. Halliburton Wireline & Perforating
PROLOGUE
Praise to God we pray to Allah SWT, thanks to His mercy and guidance activities in PT
HALLIBURTON Wireline & Perforating Wetland Pond-Sidaorjo for one month starting
from 15 July until 25 August 2014 with the title STUDY INSTRUMENT FDI (FLUID
DENSITY INERTIAL) TOOL FOR PROCESS IN CASED-HOLE LOGGING IN
HALLIBURTON WIRELINE & PERFORATING, TAMBAK SAWAH- SIDOARJO
can be done well until the end of this report can kerjapraktek stacking writer to finish.
Practical work and the preparation of this report do not support all the parties separated.
The author would like to thank:
1. God Almighty for His will above all was the author given the ability and patience
to be able to complete this practical work.
2. Both parents and families who have given the full spirit and support both morally
and materially to the author during practical work is underway.
3. Mr. Rangga as a mentor who has guided for Job Training activities.
4. Mr. Oscar Ongkokusumo as Supervisor of Internship Program / Maintenance
Coordinator.
5. Mr. Nata and Mr. Agus who have shared their knowledge and experiences during
practical work.
6. Mr. Edwin, Mr. Arif and Mr. Moamar, Mr. Satra who have shared knowledge
about the tools that will be discussed during the practical work.
7. All members of the ME and SONDE LAB which has given a lot of material and
knowledge for the writer to do practical work.
8. Mr. Pamudji Raharjo as Field Services Coordinator Halliburton W & P Surabaya.
9. Mrs. Aulia Siti Aisjah as supervisor who has helped in the construction of this
practical work report.
10. Gigis Kintan Miyarthaluna student of engineering physics ITS, as co-workers
practice.
11. Bazi Aji student of engineering physics ITS who have given moral support and
assistance in the supply of equipment for the manufacture of practical work.
Jurusan Teknik Fisika- FTI- ITS v
Practical Work Report PT. Halliburton Wireline & Perforating
12. All my friends and all those who have contributed, either directly or indirectly in
this practical work which can’t be authors mention one by one thank you for all
your help.
The author realizes that this report is still far from perfect. For that advice and constructive
criticism is expected. Hopefully this report useful for us all. End the authors apologize for
any mistakes made during implementation to the preparation of this report.
Surabaya, August 2014
Author,
Winda Cynthia Dewi
2411 100 087
Jurusan Teknik Fisika- FTI- ITS vi
Practical Work Report PT. Halliburton Wireline & Perforating
TABLE OF CONTENTS
COVER PAGE........................................................................................................................i
APPROVAL SHEET.............................................................................................................ii
COMPANY APPROVAL SHEET.......................................................................................iii
ABSTRACT..........................................................................................................................iv
INTRODUCTION..................................................................................................................v
TABLE OF CONTENTS.....................................................................................................vii
LIST OF FIGURES................................................................................................................x
LIST OF TABLES...............................................................................................................xii
CHAPTER I INTRODUCTION............................................................................................1
1.1. Practical Work Background..........................................................................................1
1.2. Practical Work Purpose................................................................................................1
1.3. Practical Work Material................................................................................................2
1.4. Place and Time of Execution........................................................................................3
1.5. Schedule of Program Activities....................................................................................4
CHAPTER II COMPANY PROFILE....................................................................................6
2.1. History of PT.Halliburton.............................................................................................6
2.2. Vision and Mission.......................................................................................................7
2.3. Organzational Structure................................................................................................8
2.4. Operation Area............................................................................................................11
2.5. Operation Facilities.....................................................................................................12
2.6. Kasus Manajerial tentang Keselamatan Kerja............................................................13
2.6.1. Job Safety Analysys (JSA)..............................................................................13
BAB III STUDY INSTRUMENT FDI ( FLUID DENSITY INERTIAL ) TOOL UNTUK
PROSES LOGGING PADA CASED-HOLE DI PT. HALLIBURTON WIRELINE
& PERFORATING....................................................................................................20
3.1. Logging....................................................................................................................20
3.2. Wireline Logging.....................................................................................................20
3.3. Cased-Hole Logging.................................................................................................22
Jurusan Teknik Fisika- FTI- ITS vii
Practical Work Report PT. Halliburton Wireline & Perforating
3.4. Production Logging Tool (PLT)...............................................................................23
3.4.1. Quartz, Pressure Gauge, QPS.......................................................................27
3.4.2. Sensor CCL...................................................................................................27
3.4.3. Gamma Ray..................................................................................................28
3.4.4. ILS Flowmeter..............................................................................................28
3.4.5. Densitas........................................................................................................29
3.4.3. Kapasitansi....................................................................................................28
3.4.4. Suhu..............................................................................................................28
3.4.5. Flowmeter.....................................................................................................29
3.5. Fluid Density Inertial (FDI) Tool.............................................................................24
3.6. Density......................................................................................................................25
3.7. Komponen Fluid Density Inertial Tool....................................................................26
3.7.1. Tuning Fork..................................................................................................27
3.7.2. Piezoelectric Stack........................................................................................27
3.7.3. Electronics Assembly...................................................................................28
3.7.4. Oil Reservoir.................................................................................................28
3.7.5. Oil Fill Port...................................................................................................29
3.8. Block Diagram System.............................................................................................29
3.8.1. Ultrawire Toolbus.........................................................................................30
3.8.2. Ultrawire Power Supply...............................................................................30
3.8.3. Telemetry Board...........................................................................................30
3.8.4. Oscillator Board...........................................................................................30
3.8.3. Analogue to Digital Convertion Board........................................................30
3.8.4. Tuning Fork..................................................................................................30
3.8.3. Crystal Stack.................................................................................................31
3.8.4. Temperature Sensor.....................................................................................31
3.9. Tool Calibration.......................................................................................................31
3.10. Tool Assembly.........................................................................................................33
BAB IV Conclusion and Recommendation35
4.1. Conclusion35
4.2. Recommendation35
DAFTAR PUSTAKA..........................................................................................................36
Jurusan Teknik Fisika- FTI- ITS viii
Practical Work Report PT. Halliburton Wireline & Perforating
LAMPIRAN.............................................................................................................................
Jurusan Teknik Fisika- FTI- ITS ix
Practical Work Report PT. Halliburton Wireline & Perforating
DAFTAR GAMBAR
Gambar 2.1 Struktur Organisasi Perusahaan
Gambar 2.2 Logging Unit di Offshore
Gambar 2.3 Halliburton Life Rules12
Gambar 3.1 Proses Logging20
Gambar 3.2 Cased-hole Logging22
Gambar 3.3 Standard Length Production Logging Tool23
Gambar 3.4 Fluid Density Inertial Tool26
Gambar 3.5. Struktur Alat FDI27
Gambar 3.6 Tuning Fork pada FDI27
Gambar 3.7 Diagram Blok FDI29
Gambar 3.8 Tampilan Program Warrior untuk FDI30
Gambar 3.9 Instruksi Manual Perakitan FDI 32
Jurusan Teknik Fisika- FTI- ITS x
Practical Work Report PT. Halliburton Wireline & Perforating
DAFTAR TABEL
Tabel 1.1 Realisasi Kegiatan
Jurusan Teknik Fisika- FTI- ITS xi