Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Auction: Tuesday June 27, 11:00 AM (Local Time)
Inspection: Monday June 26, 9 AM to 4 PM
As Authorized by Grant Thornton Limited – Court Appointed Receiver
Scotia Atlantic Biomass Complete Wood Pellet Mill – Rated At 375 Ton/Day Cap.
Largest Producer In Eastern CanadaUpper Musquodoboit, Nova Scotia, Canada
This brochure is meant merely as a guide. Infinity Asset Solutions makes no guarantee, expressed or implied, as to the accuracy of the information in thisbrochure. Buyers should inspect the goods beforehand to satisfy themselves.
Bid Live Onsite & Online Via
TERMS OF SALEPayment: All payments must be in Cash, Certified Funds, Wire Transfers, orCompany Checks, which must be accompanied with a bank letter guaranteeingirrevocable payment to Infinity Asset Solutions Inc. Invoices up to $2,000 can bepaid by Visa, Mastercard or Interac.All Online bidders must register on Bidspotter by 5pm Monday June 26.A 16% buyers premium will be added to all onsite purchases (18% Online).A $500 refundable security deposit is required upon onsite registration ($2,000 Online).A 25% deposit is required at time of purchase, balance due by 4pm WednesdayJune 28, 2017. NO EXCEPTIONS.All goods are sold “As Is, Where Is”, ALL SALES ARE FINAL. All subject to prior sale. Complete terms and conditions including removal procedures, are available on ourwebsite, will be posted at the auction and will be provided at the time of registration.
REMOVAL TIMESAll small items by Tuesday July 4, 2017. All major items by Tuesday August 15, 2017.Hours: Monday – Friday between 8 am – 4 pm.No items may be removed during auction. NO EXCEPTIONS.
DIRECTIONS: (45 minutes east of Halifax) From Halifax Stanfield InternationalAirport to 9156 Hwy 224, Upper Musquodoboit, Nova Scotia. Exit Airport and followsigns for NS-212 E. Turn Left onto Old Guysborough Rd/NS 212 E. Turn Left ontoNS-357 N. Continue onto NS-224 E. Destination will be on the Right.
Member In Good Standing Of:
infinityassets.com 905.669.8893 joinersales.comhilcoind.com
Sale Managed By Held In Conjunction With
infinityassets.com 905.669.8893 joinersales.com hilcoind.com
Sale Managed By Held In Conjunction With
Sennebogen 821 M Green Line Material Handler
WALKING FLOOR INFEED SYSTEM
HI-VAC PORTABLE VACUUM LOADERMETTLER TOLEDO DOUBLE STATION TRUCK SCALE
DAEWOO G25E-3 TYPE G/LP FORKLIFT
MASSEY FERGUSON 2724 RIDE-ON LAWN MOWER KOHLER 125 DIESEL GENERATOR ATLAS COPCO COMPRESSOR
PARTIAL VIEW OF BUILDINGS, TRANSFORMERS, TEC CABLE & ELECTRICAL
Printed in Canada
BUILDINGS & ELECTRICALElectrical Systems Throughout Plant Buildings, SiteTransformers, Back-up Transformer and Electrical ServiceThroughout Plant BuildingsSupport Structures, Access Platforms, Railings, Ladders,Ducting and Electrical Components, Large Quantity of TecCable, Motor Starters, etc.
SUPPORT EQUIPMENTDaewoo G25E-3 Type G/LP Forklift, 4,450lb Capacity,186” Lift, Side Shift, 3 Stage, Pneumatic Tires, s/n GA-00413Massey Ferguson 2724 Ride-on Lawn Mower2015 Atlas Copco Type GAQ22VSD+FF 30HPCompressor, 575V, 60Hz, 3Ph, 185 PSI, s/n AP1828406Kohler Power System 125 Diesel Generator EmergencyPower Back-up, 125KWGrecon 12-Zone Spark Detection SystemPlant Software and Automation Including HardwareTesting and Lab Equipment, (2) Moisture Analyzers,Screen Shaker, Separator and Custom Pellet TumblerCraig High Dump Loader BucketCraig Chip BucketHLA 4000 Articulating Snow BladeOffice Furnishings, Computers and Office Equipment
INVENTORY & STORES Parts and Stores Inventory Including Motors, Drives,Electrical Switch Gear, Reducers, Lubricants & Filters,Hydraulics & Pneumatics (Over $175,000 Cost)
ANDRITZ SPROUT PELLET MILLS
B.I.D. CANADA LTD. HYDRAULIC EXTENDED ARM TRUCK DUMPER
CBI MAGNUM FORCE 6400 PORTABLE HORIZONTAL WOOD GRINDER
ANDRITZ 4360 HAMMERMILL
400HP
AS NEW AS 2009
2010
20096,200 CF CAPACITY
4,450lb
125KW 2015 30HP
5-7 CHIP TRUCKS PER HOUR
80 TON
5 AVAILABLE
2 AVAILABLEUP TO 600HP
1,050HP
LOG LOADER2013 Sennebogen 821 M Green Line Material Handler, Log Grapple, Elevated Cab, HydraulicOutriggers, Solid Tire, s/n 821.0.1476
TRUCK SCALEMettler Toledo 80 Ton Capacity x 60’ Double Station Truck Scale w/ Scale House and Components
WALKING FLOOR FEED SYSTEMS(2) 20’ x 40’ Walking Floor Infeed System w/ (30) 75HP Drive Motors, Spiked Roller and Exterior Structure
SHOP EQUIPMENTWilliams and White 16’ Travelling Head Knife Grinder w/ ToolingHi-Vac Portable Vacuum LoaderLincoln Electric 305G Ranger Gas Powered Portable WelderAir Liquide A250 AC/DC Arc WelderSullair 30HP Screw CompressorGraco Automatic Greasing SystemAssorted Power Tools, Hand Tools, Metal Working Equipment, Welder, Drill Press
2 AVAILABLE 20' X 40'
80 Ton X 60' Capacity
ROLLING STOCK/SHOP EQUIPMENT & TRUCK SCALE BUILDINGS/SUPPORT EQUIPMENT & STORES INVENTORY2013
Complete Manufacturing Facility Available as a TurnkeyOperation Including Land, Buildings and Equipment.Please Contact Bruce Lyle @ [email protected]
ROLLING STOCK/SHOP EQUIPMENT & TRUCK SCALE BUILDINGS/SUPPORT EQUIPMENT & STORES INVENTORY
ONSITE AUCTION – THEATRE STYLE!
CRAIG HIGH DUMP LOADER BUCKET
PELLET MILL CONTROLS
ScotiaAtlanticBiomass_auction.qxp_1 2017-05-18 10:36 AM Page 1
PELLET MILLS/HAMMERMILLS/HAMMER HOG & CHIP BINSPELLET MILLS/HAMMERMILLS/HAMMER HOG & CHIP BINS
PARTIAL VIEW OF ANDRITZ SPROUT PELLET MILLS
32+ SPARE NEW & USED PELLET DIE ROLLS
PARTIAL VIEW OF ANDRITZ 4360 HAMMERMILLS
PELLET MILLS2009 (#3) Andritz Sprout 26LM2 Pellet Mill,400HP, 575V, 3 Roll w/ Infeed, Centrifeeder andConditioner, s/n 1317559612009 (#5) Andritz Sprout 26LM2 Pellet Mill,400HP, 575V, 3 Roll Infeed, Centrifeeder andConditioner, s/n N/A1997 (#2) Andritz Sprout 26WNV Pellet Mill,400HP, 575V w/ Infeed, Centrifeeder andConditioner, s/n 1997-010801997 (#4) Andritz Sprout 26WNV Pellet Mill,400HP, 575V w/ Infeed, Centrifeeder andConditioner, s/n 1997-010721997 (#1) Andritz Sprout 26WNV Pellet Mill,400HP, 575V w/ Infeed, Centrifeeder andConditioner, s/n 1997-01068(12) Andritz Pellet Die Rolls and Hammer MillBeaters (NEW)(20+) Reconditioned Die Rolls, Hammers andTooling
HAMMERMILLS & HAMMER HOG2010 Andritz 4360 Hammermill, 600HP,1,500/1,800 RPM, Screen Area Dm2 468, Filter Airm3/h 16,500, Inlet 19.5” x 63”, Discharge 5813/16” x 63”, s/n 131957763-20102010 Andritz 4360 Hammermill, 500HP,1,500/1,800 RPM, Screen Area Dm2 468, Filter Airm3/h 16,500, Inlet 19.5” x 63”, Discharge 5813/16” x 63”, s/n 131957762-2010Jeffrey WB66 Hammer Hog, 500HP Main DriveMotor, 10” Diameter Shaft, Rotor Size Diameter48”, Rotor Length 53”, Feed Opening 51” x 43”,Discharge Opening 53” x 86”, Height 72”, Width93”, Length 88”, s/n 886872(2) 2010 Andritz 1260 Pocket Feeder, s/n’s 131957765-2010, 1311957764-2010Roto-Shaker 6’ x 10’ Shaker Screen
CHIP BINS & STORAGEBottom Dump Chip Hopper-Bins, (3) Compartmentx 19’ Ea, 140 m/ton Capacity c/w SupportStructure, Catwalks and Access Platforms (BoltTogether)Bottom Dump Bark Load-out Hopper-Bin, (3)Compartment, 120 m/ton Capacity c/w SupportStructure, Catwalks and Access Platforms (BoltTogether)(4) Bin Pellet Storage System, 300 m/ton Capacity(5) Dry Fibre Storage Bins
MEC TRIPLE PASS ROTARY DRYER SYSTEM
GTS LIVE FLOOR BIOMASS FURNACE
PARTIAL VIEW OF CONVEYORS & AUGERS
CBI MAGNUM FORCE 6400 PORTABLE HORIZONTAL WOOD GRINDER
CLEAVER BROOKS STEAM BOILER
OLIVER MANUFACTURING 1205 GRAVITY SEPARATOR DESTONER
DESTONERS2015 Oliver Manufacturing 1205 Gravity Separator Destoner, 144” x 60” Deck Size, 20HP Fan Drive w/ Shaker Table2000 Oliver Manufacturing Gravity Separator Destoner, 144” x 60” Deck Size, 20HP Fan Drive w/ Shaker Table(2) Destoner Dust Collection Cyclone w/ Airlocks, Motors, Support Structure, Access Catwalks, Electrical Components,Waste Conveyor Belt
DRYER SYSTEMMEC 13’ x 60’ Triple Pass Rotary Dryer w/ 500HP Blower, 500HP, Return/Recycle Blower, Cyclones, Support Structures,Airlocks and Effox Hot Gas Damper System c/w Rotary Inlet Feeder
BELT CONVEYORS & AUGERS644’L x 30”W Covered Roller Belt Conveyor w/Counterweight, (7) – 40’ Tower Supports and DriveMotors220’L x 24”W Belt Conveyor w/ 40HP Drive Motorand Infeed Belt190’L x 30”W Belt Conveyor w/ 40HP Drive Motor(2) 110’L x 24”W Belt Conveyor w/ 30HP Drive Motor55’L x 36”W Incline Conveyor w/ 40HP Drive Motor(3) 33”L x 24”W Screw Conveyor Infeed w/ 20-30HPDrive Motors(2) 34’L x 24”W Screw Conveyor By-Pass w/ 5HPDrive Motors(2) 15’L x 18”W Screw Conveyor Destoner Infeed w/15HP Drive Motor(2) 6’L x 12”W Screw Conveyor Infeed w/ 10HP DriveMotor(2) 35’L x 18”W Auger Conveyor Outfeed w/ 10HPDrive Motor(2) 46’L x 24”W Auger Conveyor Outfeed w/ 15HPDrive Motor(2) 40’L x 30”W Auger Conveyor Outfeed w/ 15HPDrive Motor62’L x 30”W Auger Conveyor Outfeed w/ 15HP DriveMotor50’L Infeed Conveyor w/ 10HP Drive Motor(2) 15’L Outfeed Conveyors w/ Lump Ejector andBunting Belt Magnet(2) 48’L x 24”W Outlet Screw Conveyor w/ 10-15HPDrive Motors
BULK MATERIAL TRUCK DUMPERB.I.D. Canada Ltd. Hydraulic Extended Arm TruckDumper, Weight Capacity 80 Tons, Deck Size –85’L, 5-7 Chip Trucks Per Hour c/w Live BottomChip Hopper, 6,200 CF Capacity (Located @ PortMercy Commercial Park, Liverpool, Nova Scotia)
PORTABLE WOOD CHIPPER-GRINDER2009 CBI Magnum Force 6400 PortableHorizontal Wood Grinder w/ Caterpillar C-271,050HP Diesel Engine, Track Mounted, RemoteControlled, s/n 6400TC27HZ0360
PARTIAL VIEW OF CHIP HOPPER-BINS & STORAGE
AS NEW AS 2009500HP
125HP
2009 1,050HP
2010
2 Available
As New As 2015
13' X 60'
5 AVAILABLE
2 AVAILABLE
400HP
UP TO 600HP
UP TO 300 M/TON
2010
65,000,000 BTU
LAW-MAROT MILPRO COUNTER FLOW COOLER
MACHINERY MOVERSExclusive rigging will apply for this sale.
Please go to website for details.
FURNACE/DRYER AND DESTONERS TRUCK DUMPER AND WOOD GRINDER/CONVEYORSFURNACE/DRYER AND DESTONERS TRUCK DUMPER AND WOOD GRINDER/CONVEYORS
BIOMASS FURNACE SYSTEMGTS 65,000,000 BTU Live Floor Biomass Furnace w/ 50HP Primary, 40HPSecondary Blowers, Support Structure, Platforms and Access DecksCleaver Brooks 125HP Steam Boiler w/ PumpsWater Filtration System for Boiler System
DRYER SYSTEM2010 Law-Marot MilPro Counter Flow Cooler w/ 100HP Motor, Airlock,Paddle and Gate Components2010 Law-Marot High Efficiency Dust Collection Cyclone and Return Fan100HP Cooler Fan w/ Ducting
BAG HOUSEDust Hog Filter Unit(2) Scientific Dust Collector Bag House
B.I.D. CANADA LTD. HYDRAULIC EXTENDED ARM TRUCK DUMPER
80 TON CAPACITY
5-7 CHIP TRUCKS PER HOUR
ScotiaAtlanticBiomass_auction.qxp_1 2017-05-18 9:37 AM Page 2
PELLET MILLS/HAMMERMILLS/HAMMER HOG & CHIP BINSPELLET MILLS/HAMMERMILLS/HAMMER HOG & CHIP BINS
PARTIAL VIEW OF ANDRITZ SPROUT PELLET MILLS
32+ SPARE NEW & USED PELLET DIE ROLLS
PARTIAL VIEW OF ANDRITZ 4360 HAMMERMILLS
PELLET MILLS2009 (#3) Andritz Sprout 26LM2 Pellet Mill,400HP, 575V, 3 Roll w/ Infeed, Centrifeeder andConditioner, s/n 1317559612009 (#5) Andritz Sprout 26LM2 Pellet Mill,400HP, 575V, 3 Roll Infeed, Centrifeeder andConditioner, s/n N/A1997 (#2) Andritz Sprout 26WNV Pellet Mill,400HP, 575V w/ Infeed, Centrifeeder andConditioner, s/n 1997-010801997 (#4) Andritz Sprout 26WNV Pellet Mill,400HP, 575V w/ Infeed, Centrifeeder andConditioner, s/n 1997-010721997 (#1) Andritz Sprout 26WNV Pellet Mill,400HP, 575V w/ Infeed, Centrifeeder andConditioner, s/n 1997-01068(12) Andritz Pellet Die Rolls and Hammer MillBeaters (NEW)(20+) Reconditioned Die Rolls, Hammers andTooling
HAMMERMILLS & HAMMER HOG2010 Andritz 4360 Hammermill, 600HP,1,500/1,800 RPM, Screen Area Dm2 468, Filter Airm3/h 16,500, Inlet 19.5” x 63”, Discharge 5813/16” x 63”, s/n 131957763-20102010 Andritz 4360 Hammermill, 500HP,1,500/1,800 RPM, Screen Area Dm2 468, Filter Airm3/h 16,500, Inlet 19.5” x 63”, Discharge 5813/16” x 63”, s/n 131957762-2010Jeffrey WB66 Hammer Hog, 500HP Main DriveMotor, 10” Diameter Shaft, Rotor Size Diameter48”, Rotor Length 53”, Feed Opening 51” x 43”,Discharge Opening 53” x 86”, Height 72”, Width93”, Length 88”, s/n 886872(2) 2010 Andritz 1260 Pocket Feeder, s/n’s 131957765-2010, 1311957764-2010Roto-Shaker 6’ x 10’ Shaker Screen
CHIP BINS & STORAGEBottom Dump Chip Hopper-Bins, (3) Compartmentx 19’ Ea, 140 m/ton Capacity c/w SupportStructure, Catwalks and Access Platforms (BoltTogether)Bottom Dump Bark Load-out Hopper-Bin, (3)Compartment, 120 m/ton Capacity c/w SupportStructure, Catwalks and Access Platforms (BoltTogether)(4) Bin Pellet Storage System, 300 m/ton Capacity(5) Dry Fibre Storage Bins
MEC TRIPLE PASS ROTARY DRYER SYSTEM
GTS LIVE FLOOR BIOMASS FURNACE
PARTIAL VIEW OF CONVEYORS & AUGERS
CBI MAGNUM FORCE 6400 PORTABLE HORIZONTAL WOOD GRINDER
CLEAVER BROOKS STEAM BOILER
OLIVER MANUFACTURING 1205 GRAVITY SEPARATOR DESTONER
DESTONERS2015 Oliver Manufacturing 1205 Gravity Separator Destoner, 144” x 60” Deck Size, 20HP Fan Drive w/ Shaker Table2000 Oliver Manufacturing Gravity Separator Destoner, 144” x 60” Deck Size, 20HP Fan Drive w/ Shaker Table(2) Destoner Dust Collection Cyclone w/ Airlocks, Motors, Support Structure, Access Catwalks, Electrical Components,Waste Conveyor Belt
DRYER SYSTEMMEC 13’ x 60’ Triple Pass Rotary Dryer w/ 500HP Blower, 500HP, Return/Recycle Blower, Cyclones, Support Structures,Airlocks and Effox Hot Gas Damper System c/w Rotary Inlet Feeder
BELT CONVEYORS & AUGERS644’L x 30”W Covered Roller Belt Conveyor w/Counterweight, (7) – 40’ Tower Supports and DriveMotors220’L x 24”W Belt Conveyor w/ 40HP Drive Motorand Infeed Belt190’L x 30”W Belt Conveyor w/ 40HP Drive Motor(2) 110’L x 24”W Belt Conveyor w/ 30HP Drive Motor55’L x 36”W Incline Conveyor w/ 40HP Drive Motor(3) 33”L x 24”W Screw Conveyor Infeed w/ 20-30HPDrive Motors(2) 34’L x 24”W Screw Conveyor By-Pass w/ 5HPDrive Motors(2) 15’L x 18”W Screw Conveyor Destoner Infeed w/15HP Drive Motor(2) 6’L x 12”W Screw Conveyor Infeed w/ 10HP DriveMotor(2) 35’L x 18”W Auger Conveyor Outfeed w/ 10HPDrive Motor(2) 46’L x 24”W Auger Conveyor Outfeed w/ 15HPDrive Motor(2) 40’L x 30”W Auger Conveyor Outfeed w/ 15HPDrive Motor62’L x 30”W Auger Conveyor Outfeed w/ 15HP DriveMotor50’L Infeed Conveyor w/ 10HP Drive Motor(2) 15’L Outfeed Conveyors w/ Lump Ejector andBunting Belt Magnet(2) 48’L x 24”W Outlet Screw Conveyor w/ 10-15HPDrive Motors
BULK MATERIAL TRUCK DUMPERB.I.D. Canada Ltd. Hydraulic Extended Arm TruckDumper, Weight Capacity 80 Tons, Deck Size –85’L, 5-7 Chip Trucks Per Hour c/w Live BottomChip Hopper, 6,200 CF Capacity (Located @ PortMercy Commercial Park, Liverpool, Nova Scotia)
PORTABLE WOOD CHIPPER-GRINDER2009 CBI Magnum Force 6400 PortableHorizontal Wood Grinder w/ Caterpillar C-271,050HP Diesel Engine, Track Mounted, RemoteControlled, s/n 6400TC27HZ0360
PARTIAL VIEW OF CHIP HOPPER-BINS & STORAGE
AS NEW AS 2009500HP
125HP
2009 1,050HP
2010
2 Available
As New As 2015
13' X 60'
5 AVAILABLE
2 AVAILABLE
400HP
UP TO 600HP
UP TO 300 M/TON
2010
65,000,000 BTU
LAW-MAROT MILPRO COUNTER FLOW COOLER
MACHINERY MOVERSExclusive rigging will apply for this sale.
Please go to website for details.
FURNACE/DRYER AND DESTONERS TRUCK DUMPER AND WOOD GRINDER/CONVEYORSFURNACE/DRYER AND DESTONERS TRUCK DUMPER AND WOOD GRINDER/CONVEYORS
BIOMASS FURNACE SYSTEMGTS 65,000,000 BTU Live Floor Biomass Furnace w/ 50HP Primary, 40HPSecondary Blowers, Support Structure, Platforms and Access DecksCleaver Brooks 125HP Steam Boiler w/ PumpsWater Filtration System for Boiler System
DRYER SYSTEM2010 Law-Marot MilPro Counter Flow Cooler w/ 100HP Motor, Airlock,Paddle and Gate Components2010 Law-Marot High Efficiency Dust Collection Cyclone and Return Fan100HP Cooler Fan w/ Ducting
BAG HOUSEDust Hog Filter Unit(2) Scientific Dust Collector Bag House
B.I.D. CANADA LTD. HYDRAULIC EXTENDED ARM TRUCK DUMPER
80 TON CAPACITY
5-7 CHIP TRUCKS PER HOUR
ScotiaAtlanticBiomass_auction.qxp_1 2017-05-18 9:37 AM Page 2
PELLET MILLS/HAMMERMILLS/HAMMER HOG & CHIP BINSPELLET MILLS/HAMMERMILLS/HAMMER HOG & CHIP BINS
PARTIAL VIEW OF ANDRITZ SPROUT PELLET MILLS
32+ SPARE NEW & USED PELLET DIE ROLLS
PARTIAL VIEW OF ANDRITZ 4360 HAMMERMILLS
PELLET MILLS2009 (#3) Andritz Sprout 26LM2 Pellet Mill,400HP, 575V, 3 Roll w/ Infeed, Centrifeeder andConditioner, s/n 1317559612009 (#5) Andritz Sprout 26LM2 Pellet Mill,400HP, 575V, 3 Roll Infeed, Centrifeeder andConditioner, s/n N/A1997 (#2) Andritz Sprout 26WNV Pellet Mill,400HP, 575V w/ Infeed, Centrifeeder andConditioner, s/n 1997-010801997 (#4) Andritz Sprout 26WNV Pellet Mill,400HP, 575V w/ Infeed, Centrifeeder andConditioner, s/n 1997-010721997 (#1) Andritz Sprout 26WNV Pellet Mill,400HP, 575V w/ Infeed, Centrifeeder andConditioner, s/n 1997-01068(12) Andritz Pellet Die Rolls and Hammer MillBeaters (NEW)(20+) Reconditioned Die Rolls, Hammers andTooling
HAMMERMILLS & HAMMER HOG2010 Andritz 4360 Hammermill, 600HP,1,500/1,800 RPM, Screen Area Dm2 468, Filter Airm3/h 16,500, Inlet 19.5” x 63”, Discharge 5813/16” x 63”, s/n 131957763-20102010 Andritz 4360 Hammermill, 500HP,1,500/1,800 RPM, Screen Area Dm2 468, Filter Airm3/h 16,500, Inlet 19.5” x 63”, Discharge 5813/16” x 63”, s/n 131957762-2010Jeffrey WB66 Hammer Hog, 500HP Main DriveMotor, 10” Diameter Shaft, Rotor Size Diameter48”, Rotor Length 53”, Feed Opening 51” x 43”,Discharge Opening 53” x 86”, Height 72”, Width93”, Length 88”, s/n 886872(2) 2010 Andritz 1260 Pocket Feeder, s/n’s 131957765-2010, 1311957764-2010Roto-Shaker 6’ x 10’ Shaker Screen
CHIP BINS & STORAGEBottom Dump Chip Hopper-Bins, (3) Compartmentx 19’ Ea, 140 m/ton Capacity c/w SupportStructure, Catwalks and Access Platforms (BoltTogether)Bottom Dump Bark Load-out Hopper-Bin, (3)Compartment, 120 m/ton Capacity c/w SupportStructure, Catwalks and Access Platforms (BoltTogether)(4) Bin Pellet Storage System, 300 m/ton Capacity(5) Dry Fibre Storage Bins
MEC TRIPLE PASS ROTARY DRYER SYSTEM
GTS LIVE FLOOR BIOMASS FURNACE
PARTIAL VIEW OF CONVEYORS & AUGERS
CBI MAGNUM FORCE 6400 PORTABLE HORIZONTAL WOOD GRINDER
CLEAVER BROOKS STEAM BOILER
OLIVER MANUFACTURING 1205 GRAVITY SEPARATOR DESTONER
DESTONERS2015 Oliver Manufacturing 1205 Gravity Separator Destoner, 144” x 60” Deck Size, 20HP Fan Drive w/ Shaker Table2000 Oliver Manufacturing Gravity Separator Destoner, 144” x 60” Deck Size, 20HP Fan Drive w/ Shaker Table(2) Destoner Dust Collection Cyclone w/ Airlocks, Motors, Support Structure, Access Catwalks, Electrical Components,Waste Conveyor Belt
DRYER SYSTEMMEC 13’ x 60’ Triple Pass Rotary Dryer w/ 500HP Blower, 500HP, Return/Recycle Blower, Cyclones, Support Structures,Airlocks and Effox Hot Gas Damper System c/w Rotary Inlet Feeder
BELT CONVEYORS & AUGERS644’L x 30”W Covered Roller Belt Conveyor w/Counterweight, (7) – 40’ Tower Supports and DriveMotors220’L x 24”W Belt Conveyor w/ 40HP Drive Motorand Infeed Belt190’L x 30”W Belt Conveyor w/ 40HP Drive Motor(2) 110’L x 24”W Belt Conveyor w/ 30HP Drive Motor55’L x 36”W Incline Conveyor w/ 40HP Drive Motor(3) 33”L x 24”W Screw Conveyor Infeed w/ 20-30HPDrive Motors(2) 34’L x 24”W Screw Conveyor By-Pass w/ 5HPDrive Motors(2) 15’L x 18”W Screw Conveyor Destoner Infeed w/15HP Drive Motor(2) 6’L x 12”W Screw Conveyor Infeed w/ 10HP DriveMotor(2) 35’L x 18”W Auger Conveyor Outfeed w/ 10HPDrive Motor(2) 46’L x 24”W Auger Conveyor Outfeed w/ 15HPDrive Motor(2) 40’L x 30”W Auger Conveyor Outfeed w/ 15HPDrive Motor62’L x 30”W Auger Conveyor Outfeed w/ 15HP DriveMotor50’L Infeed Conveyor w/ 10HP Drive Motor(2) 15’L Outfeed Conveyors w/ Lump Ejector andBunting Belt Magnet(2) 48’L x 24”W Outlet Screw Conveyor w/ 10-15HPDrive Motors
BULK MATERIAL TRUCK DUMPERB.I.D. Canada Ltd. Hydraulic Extended Arm TruckDumper, Weight Capacity 80 Tons, Deck Size –85’L, 5-7 Chip Trucks Per Hour c/w Live BottomChip Hopper, 6,200 CF Capacity (Located @ PortMercy Commercial Park, Liverpool, Nova Scotia)
PORTABLE WOOD CHIPPER-GRINDER2009 CBI Magnum Force 6400 PortableHorizontal Wood Grinder w/ Caterpillar C-271,050HP Diesel Engine, Track Mounted, RemoteControlled, s/n 6400TC27HZ0360
PARTIAL VIEW OF CHIP HOPPER-BINS & STORAGE
AS NEW AS 2009500HP
125HP
2009 1,050HP
2010
2 Available
As New As 2015
13' X 60'
5 AVAILABLE
2 AVAILABLE
400HP
UP TO 600HP
UP TO 300 M/TON
2010
65,000,000 BTU
LAW-MAROT MILPRO COUNTER FLOW COOLER
MACHINERY MOVERSExclusive rigging will apply for this sale.
Please go to website for details.
FURNACE/DRYER AND DESTONERS TRUCK DUMPER AND WOOD GRINDER/CONVEYORSFURNACE/DRYER AND DESTONERS TRUCK DUMPER AND WOOD GRINDER/CONVEYORS
BIOMASS FURNACE SYSTEMGTS 65,000,000 BTU Live Floor Biomass Furnace w/ 50HP Primary, 40HPSecondary Blowers, Support Structure, Platforms and Access DecksCleaver Brooks 125HP Steam Boiler w/ PumpsWater Filtration System for Boiler System
DRYER SYSTEM2010 Law-Marot MilPro Counter Flow Cooler w/ 100HP Motor, Airlock,Paddle and Gate Components2010 Law-Marot High Efficiency Dust Collection Cyclone and Return Fan100HP Cooler Fan w/ Ducting
BAG HOUSEDust Hog Filter Unit(2) Scientific Dust Collector Bag House
B.I.D. CANADA LTD. HYDRAULIC EXTENDED ARM TRUCK DUMPER
80 TON CAPACITY
5-7 CHIP TRUCKS PER HOUR
ScotiaAtlanticBiomass_auction.qxp_1 2017-05-18 9:37 AM Page 2
Auction: Tuesday June 27, 11:00 AM (ET)Inspection: Monday June 26, 9 AM to 4 PM
As Authorized by Grant Thornton Limited – Court Appointed Receiver
Scotia Atlantic Biomass Complete Wood Pellet Mill – Rated At 375 Ton/Day Cap.
Largest Producer In Eastern CanadaUpper Musquodoboit, Nova Scotia, Canada
This brochure is meant merely as a guide. Infinity Asset Solutions makes no guarantee, expressed or implied, as to the accuracy of the information in thisbrochure. Buyers should inspect the goods beforehand to satisfy themselves.
Bid Live Onsite & Online Via
TERMS OF SALEPayment: All payments must be in Cash, Certified Funds, Wire Transfers, orCompany Checks, which must be accompanied with a bank letter guaranteeingirrevocable payment to Infinity Asset Solutions Inc. Invoices up to $2,000 can bepaid by Visa, Mastercard or Interac.All Online bidders must register on Bidspotter by 5pm Monday June 26.A 16% buyers premium will be added to all onsite purchases (18% Online).A $500 refundable security deposit is required upon onsite registration ($2,000 Online).A 25% deposit is required at time of purchase, balance due by 4pm WednesdayJune 28, 2017. NO EXCEPTIONS.All goods are sold “As Is, Where Is”, ALL SALES ARE FINAL. All subject to prior sale. Complete terms and conditions including removal procedures, are available on ourwebsite, will be posted at the auction and will be provided at the time of registration.
REMOVAL TIMESAll small items by Tuesday July 4, 2017. All major items by Tuesday August 15, 2017.Hours: Monday – Friday between 8 am – 4 pm.No items may be removed during auction. NO EXCEPTIONS.
DIRECTIONS: (45 minutes east of Halifax) From Halifax Stanfield InternationalAirport to 9156 Hwy 224, Upper Musquodoboit, Nova Scotia. Exit Airport and followsigns for NS-212 E. Turn Left onto Old Guysborough Rd/NS 212 E. Turn Left ontoNS-357 N. Continue onto NS-224 E. Destination will be on the Right.
Member In Good Standing Of:
infinityassets.com 905.669.8893 joinersales.comhilcoind.com
Sale Managed By Held In Conjunction With
infinityassets.com 905.669.8893 joinersales.com hilcoind.com
Sale Managed By Held In Conjunction With
Sennebogen 821 M Green Line Material Handler
WALKING FLOOR INFEED SYSTEM
HI-VAC PORTABLE VACUUM LOADERMETTLER TOLEDO DOUBLE STATION TRUCK SCALE
DAEWOO G25E-3 TYPE G/LP FORKLIFT
MASSEY FERGUSON 2724 RIDE-ON LAWN MOWER KOHLER 125 DIESEL GENERATOR ATLAS COPCO COMPRESSOR
PARTIAL VIEW OF BUILDINGS, TRANSFORMERS, TEC CABLE & ELECTRICAL
Printed in Canada
BUILDINGS & ELECTRICALElectrical Systems Throughout Plant Buildings, SiteTransformers, Back-up Transformer and Electrical ServiceThroughout Plant BuildingsSupport Structures, Access Platforms, Railings, Ladders,Ducting and Electrical Components, Large Quantity of TecCable, Motor Starters, etc.
SUPPORT EQUIPMENTDaewoo G25E-3 Type G/LP Forklift, 4,450lb Capacity,186” Lift, Side Shift, 3 Stage, Pneumatic Tires, s/n GA-00413Massey Ferguson 2724 Ride-on Lawn Mower2015 Atlas Copco Type GAQ22VSD+FF 30HPCompressor, 575V, 60Hz, 3Ph, 185 PSI, s/n AP1828406Kohler Power System 125 Diesel Generator EmergencyPower Back-up, 125KWGrecon 12-Zone Spark Detection SystemPlant Software and Automation Including HardwareTesting and Lab Equipment, (2) Moisture Analyzers,Screen Shaker, Separator and Custom Pellet TumblerCraig High Dump Loader BucketCraig Chip BucketHLA 4000 Articulating Snow BladeOffice Furnishings, Computers and Office Equipment
INVENTORY & STORES Parts and Stores Inventory Including Motors, Drives,Electrical Switch Gear, Reducers, Lubricants & Filters,Hydraulics & Pneumatics (Over $175,000 Cost)
ANDRITZ SPROUT PELLET MILLS
B.I.D. CANADA LTD. HYDRAULIC EXTENDED ARM TRUCK DUMPER
CBI MAGNUM FORCE 6400 PORTABLE HORIZONTAL WOOD GRINDER
ANDRITZ 4360 HAMMERMILL
400HP
AS NEW AS 2009
2010
20096,200 CF CAPACITY
4,450lb
125KW 2015 30HP
5-7 CHIP TRUCKS PER HOUR
80 TON
5 AVAILABLE
2 AVAILABLEUP TO 600HP
1,050HP
LOG LOADER2013 Sennebogen 821 M Green Line Material Handler, Log Grapple, Elevated Cab, HydraulicOutriggers, Solid Tire, s/n 821.0.1476
TRUCK SCALEMettler Toledo 80 Ton Capacity x 60’ Double Station Truck Scale w/ Scale House and Components
WALKING FLOOR FEED SYSTEMS(2) 20’ x 40’ Walking Floor Infeed System w/ (30) 75HP Drive Motors, Spiked Roller and Exterior Structure
SHOP EQUIPMENTWilliams and White 16’ Travelling Head Knife Grinder w/ ToolingHi-Vac Portable Vacuum LoaderLincoln Electric 305G Ranger Gas Powered Portable WelderAir Liquide A250 AC/DC Arc WelderSullair 30HP Screw CompressorGraco Automatic Greasing SystemAssorted Power Tools, Hand Tools, Metal Working Equipment, Welder, Drill Press
2 AVAILABLE 20' X 40'
80 Ton X 60' Capacity
ROLLING STOCK/SHOP EQUIPMENT & TRUCK SCALE BUILDINGS/SUPPORT EQUIPMENT & STORES INVENTORY2013
Complete Manufacturing Facility Available as a TurnkeyOperation Including Land, Buildings and Equipment.Please Contact Bruce Lyle @ [email protected]
ROLLING STOCK/SHOP EQUIPMENT & TRUCK SCALE BUILDINGS/SUPPORT EQUIPMENT & STORES INVENTORY
ONSITE AUCTION – THEATRE STYLE!
CRAIG HIGH DUMP LOADER BUCKET
PELLET MILL CONTROLS
ScotiaAtlanticBiomass_auction.qxp_1 2017-05-18 9:37 AM Page 1
Auction: Tuesday June 27, 11:00 AM (Local Time)
Inspection: Monday June 26, 9 AM to 4 PM
As Authorized by Grant Thornton Limited – Court Appointed Receiver
Scotia Atlantic Biomass Complete Wood Pellet Mill – Rated At 375 Ton/Day Cap.
Largest Producer In Eastern CanadaUpper Musquodoboit, Nova Scotia, Canada
This brochure is meant merely as a guide. Infinity Asset Solutions makes no guarantee, expressed or implied, as to the accuracy of the information in thisbrochure. Buyers should inspect the goods beforehand to satisfy themselves.
Bid Live Onsite & Online Via
TERMS OF SALEPayment: All payments must be in Cash, Certified Funds, Wire Transfers, orCompany Checks, which must be accompanied with a bank letter guaranteeingirrevocable payment to Infinity Asset Solutions Inc. Invoices up to $2,000 can bepaid by Visa, Mastercard or Interac.All Online bidders must register on Bidspotter by 5pm Monday June 26.A 16% buyers premium will be added to all onsite purchases (18% Online).A $500 refundable security deposit is required upon onsite registration ($2,000 Online).A 25% deposit is required at time of purchase, balance due by 4pm WednesdayJune 28, 2017. NO EXCEPTIONS.All goods are sold “As Is, Where Is”, ALL SALES ARE FINAL. All subject to prior sale. Complete terms and conditions including removal procedures, are available on ourwebsite, will be posted at the auction and will be provided at the time of registration.
REMOVAL TIMESAll small items by Tuesday July 4, 2017. All major items by Tuesday August 15, 2017.Hours: Monday – Friday between 8 am – 4 pm.No items may be removed during auction. NO EXCEPTIONS.
DIRECTIONS: (45 minutes east of Halifax) From Halifax Stanfield InternationalAirport to 9156 Hwy 224, Upper Musquodoboit, Nova Scotia. Exit Airport and followsigns for NS-212 E. Turn Left onto Old Guysborough Rd/NS 212 E. Turn Left ontoNS-357 N. Continue onto NS-224 E. Destination will be on the Right.
Member In Good Standing Of:
infinityassets.com 905.669.8893 joinersales.comhilcoind.com
Sale Managed By Held In Conjunction With
infinityassets.com 905.669.8893 joinersales.com hilcoind.com
Sale Managed By Held In Conjunction With
Sennebogen 821 M Green Line Material Handler
WALKING FLOOR INFEED SYSTEM
HI-VAC PORTABLE VACUUM LOADERMETTLER TOLEDO DOUBLE STATION TRUCK SCALE
DAEWOO G25E-3 TYPE G/LP FORKLIFT
MASSEY FERGUSON 2724 RIDE-ON LAWN MOWER KOHLER 125 DIESEL GENERATOR ATLAS COPCO COMPRESSOR
PARTIAL VIEW OF BUILDINGS, TRANSFORMERS, TEC CABLE & ELECTRICAL
Printed in Canada
BUILDINGS & ELECTRICALElectrical Systems Throughout Plant Buildings, SiteTransformers, Back-up Transformer and Electrical ServiceThroughout Plant BuildingsSupport Structures, Access Platforms, Railings, Ladders,Ducting and Electrical Components, Large Quantity of TecCable, Motor Starters, etc.
SUPPORT EQUIPMENTDaewoo G25E-3 Type G/LP Forklift, 4,450lb Capacity,186” Lift, Side Shift, 3 Stage, Pneumatic Tires, s/n GA-00413Massey Ferguson 2724 Ride-on Lawn Mower2015 Atlas Copco Type GAQ22VSD+FF 30HPCompressor, 575V, 60Hz, 3Ph, 185 PSI, s/n AP1828406Kohler Power System 125 Diesel Generator EmergencyPower Back-up, 125KWGrecon 12-Zone Spark Detection SystemPlant Software and Automation Including HardwareTesting and Lab Equipment, (2) Moisture Analyzers,Screen Shaker, Separator and Custom Pellet TumblerCraig High Dump Loader BucketCraig Chip BucketHLA 4000 Articulating Snow BladeOffice Furnishings, Computers and Office Equipment
INVENTORY & STORES Parts and Stores Inventory Including Motors, Drives,Electrical Switch Gear, Reducers, Lubricants & Filters,Hydraulics & Pneumatics (Over $175,000 Cost)
ANDRITZ SPROUT PELLET MILLS
B.I.D. CANADA LTD. HYDRAULIC EXTENDED ARM TRUCK DUMPER
CBI MAGNUM FORCE 6400 PORTABLE HORIZONTAL WOOD GRINDER
ANDRITZ 4360 HAMMERMILL
400HP
AS NEW AS 2009
2010
20096,200 CF CAPACITY
4,450lb
125KW 2015 30HP
5-7 CHIP TRUCKS PER HOUR
80 TON
5 AVAILABLE
2 AVAILABLEUP TO 600HP
1,050HP
LOG LOADER2013 Sennebogen 821 M Green Line Material Handler, Log Grapple, Elevated Cab, HydraulicOutriggers, Solid Tire, s/n 821.0.1476
TRUCK SCALEMettler Toledo 80 Ton Capacity x 60’ Double Station Truck Scale w/ Scale House and Components
WALKING FLOOR FEED SYSTEMS(2) 20’ x 40’ Walking Floor Infeed System w/ (30) 75HP Drive Motors, Spiked Roller and Exterior Structure
SHOP EQUIPMENTWilliams and White 16’ Travelling Head Knife Grinder w/ ToolingHi-Vac Portable Vacuum LoaderLincoln Electric 305G Ranger Gas Powered Portable WelderAir Liquide A250 AC/DC Arc WelderSullair 30HP Screw CompressorGraco Automatic Greasing SystemAssorted Power Tools, Hand Tools, Metal Working Equipment, Welder, Drill Press
2 AVAILABLE 20' X 40'
80 Ton X 60' Capacity
ROLLING STOCK/SHOP EQUIPMENT & TRUCK SCALE BUILDINGS/SUPPORT EQUIPMENT & STORES INVENTORY2013
Complete Manufacturing Facility Available as a TurnkeyOperation Including Land, Buildings and Equipment.Please Contact Bruce Lyle @ [email protected]
ROLLING STOCK/SHOP EQUIPMENT & TRUCK SCALE BUILDINGS/SUPPORT EQUIPMENT & STORES INVENTORY
ONSITE AUCTION – THEATRE STYLE!
CRAIG HIGH DUMP LOADER BUCKET
PELLET MILL CONTROLS
ScotiaAtlanticBiomass_auction.qxp_1 2017-05-18 10:36 AM Page 1