2 Aluminum Before After

7/31/2019 2 Aluminum Before After

1/10

( I N D I A )DeBurring Solutions

Website: www.imexsu.com / www.de-burring.com

Exceed Expectation through Innovation

In the complete process of DeBurring, we recommend to use biggest size orat least one size bigger brush of that of the cutter size. We have brush sizesranging from 60, 80, 100, 115, 125, 150, 165, 180, 200, 225, 250, 296 and above.

We have a complete range of holders, tools and other accessories needed foryour M.I.D. (Machine Inline DeBurring), right from holders for your ISO / BT /

HSK & other make to suit your machine, with flow through coolant and otheraccessories required for various types of brushes holding according to yourjob, machine and process.

Check the video of one of the DeBurring process at www.de-burring.com

eB i D ur r ng ofAl um Par tum in s

5


2/10



Improved RA Value

6

These photos and notes are copyright protected property of IMEXSU Copying

and distribution without permission is prohibitedGet in touch with your Problems of DeBurring & Surface Preparation.

We offer complete range of Products,Pioneer in Soft Abrasives since 1983 in INDIA offer Consultancy, Products,

Consumable and Machines in Business since 1976

Advantage:-

All the pieces will get consistence finish, ascompared to manual DeBurring where you have100% variations.

Number of pieces completed on machine will

straight away go for further assembly on line, so nopile up for waiting for contractor people to comeand mess-up the accuracy obtain on costly machineswhere you are paying huge capital and consumablecost to stay ahead in today's competit ive market.

No sharp edges left at machined surfaces.

RA Values are improved to get better finish.

Improvement in RA value helps your leakageproblem, as the Picks from the surfaces areEliminated or got Radius.

On the following pages you will find that at themovement customers are using manual DeBurring toolsto get rid of the sharp edges generated during machining,if you forget or do not remove, the small / loose particlesfrom surface will become loose / free and then mix withoil / water and subsequently your rotating and relatedparts will get damage and the eff iciency will reduce andfuel economy will decrease, because of the foreignparticles in liquid. So during your warrantee period it bewill noticed and subsequently you have to replace forearlier shorten life.

If you are applying gasket / sealant as the matchingsurfaces are having higher points (picks) due tomachining cutter mark and their path, this will make easyway to flow the liquid through valley. After DeBurring thiswill have lesser chances as the difference between Picksand Valley are reduced.

We have given here the complete solution including flowthrough holder and accessories for their HSK-A100,

As the Diameter are bigger the water are coming fromcenter and covers the whole working face. (Patents areapplied for brush, holder, nozzle and accessories)


3/10



7






4/10



8






5/10



9





After DeBurr see all curves / opening / cavity got a nice radius,

RA value improved, no sharp edges at any point where cutter

has reached


6/10



10







has reached


7/10



11







has reached


8/10



12







has reached


9/10



13





Valve sheet is harden material which is inserted in aluminum

alloy body at intersection on the face where burr generated

due to machining is successfully removed


10/10



14





Documents

2 Aluminum Before After