Upload
oscar-tucker
View
216
Download
1
Tags:
Embed Size (px)
Citation preview
1.You must power on the computer and MLLC main power
Computer main power is the Top white button.
MLLC main power, when the power is on the green light will on.
2. You can turn on the necessary AV equipments
Visualizer
DVD
VCR
iTV
MMLC operationprocedure
MMLC operationprocedure
Teacher Computer of MLLC1.From the start button select LibraryPilot Startbar.2.Type in user: teacher3.Type in password: teacher4.Press the tick button.5.The menu bar will appear on the right side and press the ICM button to start the MLLC control system.
1.
2.
3.4
5.
1.The ICM should show connection OK for a while, if not check the main power of the MLLC.
2.Select the program source for your lesson.3.Press the transfer or Autolesson button to deliver the program
Speak to all group at any time
Classroom speaker on / off switch
Visualizer on / off switch
Video window on / off switch
Students’ monitor control button
Group Conference control button
Pair discussion control button
Phone conversation control button
Grouping control button
1.Press the video button
2.When the video window appears on the screen use the mouse pointer kick on the yellow button.
3. Select the Set Video Source option.
4.Setup the video standard according to the video source.
Video connector always set at Composite
Video StandardFor VCR select PALFor iTV select PALFor visualizer select NTSCFor DVD select NTSC
1.
2. 3.
4.
Press Ctrl+ALT+DEL at the same time, close the program with no response (沒有回應 )
Trouble shooting