42

Power Train Tools — Power Shift and Hydrostatic Transmission

FT0947 Spring Compressor, FT0833 Clamp

SMCS Code: FT0947 Spring Compressor: 3150-015, 3150-016, 3150-017, 4251-010, 4250-015, 4250-016, 4267-017; FT0833Clamp: 3000-017, 3000-017FR, 3052-017, 3150-015, 3150-016, 3150-017, 3150-017FR, 3150-017REModel: FT0947 Spring Compressor: 657B, 666B; FT0833 Clamp: D4D Tractor, 920 and 930 Wheel Loaders, 613 Tractor-ScrapersWarranty: None

• FT0947 Spring Compressor used to clamp No. 3 clutch piston when as-sembling 657B and 666B range transmissions (2 required)

• Used to hold piston when clutches are inverted when assembling powershift transmissions on D4D Tractors, 920 and 930 Wheel Loaders, and 613Tractor-Scrapers (2 required)

1U-5481 Pressure Gauge Group, 1U-5482 Pressure Adapter Group

SMCS Code: 1000-025, 1000-082, 1300-038, 3000-035, 3000-038, 3000-081, 3000-038, 3000-038, 3150-035, 3150-038, 4250-038, 5050-038, 7450-081Model: All Cat Power Shift Transmissions and Other Hydraulic SystemsWarranty: Six Months

• Used to test all Cat® power shift transmissions and other hydraulic systems• Both 1U-5481 and 1U-5482 required to replace discontinued 6V-4160 TransmissionHydraulic Test Group

• Improvements to 1U-5482 include increased number of fittings for usage on all ap-plicable equipment and smaller diameter diagnostic hoses for easier handling

ReferenceREG00452, Power Shift Transmission Testing and Adjusting manual

Item Description1 Form NEEG2220 Decal

Form NEEG2224 Decal2 Form NEEG2222 Decal (Adapter Case Inside Lid)

Form NEEG2221 Decal

Part No. Description Size Qty.Item (1)

003-8747 Pipe Elbow – 81U-5481 Pressure Gauge Group – –

3J-1907 O-ring 86V-3965 Adapter - STR Quick Disconnect – 88T-0841 Case8T-0846 Pressure Gauge 0 - 1000 kPa (0 - 145 psi) –

8T-0848 Pressure Gauge 0 - 400 kPa (0 - 58 psi) –

8T-0849 Pressure Gauge 0 - 2000 kPa (0 - 290 psi) –

43

Power Train Tools — Power Shift and Hydrostatic Transmission

1U-5481 Pressure Gauge Group, 1U-5482 Pressure Adapter Group (Cont'd.)

Part No. Description Size Qty.8T-0850 Pressure Gauge 0 - 3400 kPa (0 - 580 psi) 38T-0851 Pressure Gauge 0 - 15850 kPa (0 - 2300 psi) –

8T-0852 Pressure Gauge 0 - 39960 kPa (0 - 5800 psi) –

Item (2)177-7861 Hose Assembly – 81J-9671 O-ring – 21U-5482 Pressure Adapter Group – –

3B-6552 Elbow Pipe 90° 1/8 in NPT Ext and Int Thd 23D-8884 Elbow 90° 1/4 in NPT Ext and Int Thd 23J-1907 O-ring – 83J-7354 O-ring – 43K-0360 O-ring – 24C-3723 Box (Yellow Plastic for Fittings) –

5P-2937 Adapter 7/16 in SAE Ext Thd x 1/4 in NPT Int Thd 45P-3501 Adapter 9/16 in SAE Ext Thd x 1/4 in NPT Int Thd 65P-4674 Adapter 3/4 in SAE Ext Thd x 1/2 in NPT Int Thd 25P-4675 Adapter 1/2 in SAE Ext Thd x 1/4 in NPT Int Thd 26V-0404 Bonded Seal – 26V-0405 Bonded Seal – 26V-0406 Bonded Seal – 26V-0407 Bonded Seal – 26V-3965 Adapter - STR Quick Disconnect – 86V-3966 Valved Nipple 1/4 in NPT Ext Thd 86V-3989 Unvalved Nipple 1/4 in NPT Int Thd 26V-4142 Unvalved Nipple 1/8 in Int Thd –

6V-4143 Coupler As – 166V-6560 O-ring – 26V-8926 Adapter M10 x 1.5 Ext Thd x 9/16 in SAE Int Thd 26V-9028 O-ring – 27M-8489 Adapter Assembly 90° 9/16 in SAE Ext Thd x 1/4 in NPT Int Thd 28C-7574 Adapter 1/4 in NPT x 6 in Ext Nipple 18C-7575 Adapter 1/8 in NPT x 1 1/2 Ext Nipple 38C-7576 Adapter 1/8 in NPT x 3 in Ext Nipple 38T-0841 Case8T-7860 Connector M12 x 1.5 Ext Thd x 7/16 in SAE Int Thd 28T-7861 Connector M14 x 1.5 Ext Thd x 9/16 in SAE Int Thd 28T-7876 O-ring – 28T-7908 Adapter 1/8 in - 28 BSPP Ext Thd x 7/16 in SAE Int Thd 28T-7909 Adapter 1/4 in - 19 BSPP Ext Thd x 7/16 in SAE Int Thd 2

44

Power Train Tools — Power Shift and Hydrostatic Transmission

1U-5481 Pressure Gauge Group, 1U-5482 Pressure Adapter Group (Cont'd.)

Part No. Description Size Qty.8T-7911 Adapter 3/8 in - 19 BSPP Ext Thd x 9/16 in SAE Int Thd 28T-7913 Adapter 1/2 in - 14 BSPP Ext Thd x 3/4 in SAE Int Thd 2

4C-5560 Hose Assembly, 4C-5561 Bulkhead Fitting Group

SMCS Code: 0784Model: 1U-5481 Pressure Gauge GroupWarranty: Six Months

• Repair parts for 1U-5481 Pressure Gauge Group; when replacing anyof the pressure gauges, 20.32 cm (8 in) length of diagnostic hose isoften damaged

• 4C-5560 Hose Assembly has 1/8 inch NPT pipe fittings on both ends —fits current gauge groups

• First generation of gauge groups has 1/4 inch NPT bulkhead fitting;4C-5561 Bulkhead Fitting used to adapt these to 0.125 mm (1/8 in) hose

Part Number Description4C-5560 Hose Assembly4C-5561 Bulkhead Fitting Group

Filter Elements

SMCS Code: 5068-010Model: All Cat Hydraulic Filter Units and CartsWarranty: Six Months

• Used to remove water from a hydraulic oil tank• Economical alternative for water removal• Fits on standard, low-pressure, spin-on, filter head• Aluminum body with cellulose media• Working pressure: 1035 kPa (150 psi)• Particle filtration size: 25-micron

Item Part No. Length Diameter Weight Flow Rate Water Removal1 180-9549 132.3 mm (5.21 in) 93.7 mm (3.69 in) 0.54 kg (1.2 lb) 95 lpm (25 gpm) 170 mL (10.3 cu in) @ 20 psi

differential2 188-7027 289.3 mm (11.39 in) 129.5 mm (5.10 in) 1.44 kg (3.2 lb) 227 lpm (60 gpm) 700 mL (42.4 cu in) @ 20 psi

differential