DTVS-1B EASY SETUP - QUICK REFERENCE GUIDE Step 1 Select your location or region and press OK. Step 2 Select Yes when asked do you want to scan. Step 3 The equipment attached to the satellite dish will be detected and the signal strength and quality bars will be shown. The channel scan will automatically begin once the signal is found. Step 4 The channels found will be shown. The process can take a few minutes so please wait until the serach is completed. Step 5 Once all the channels are found the receiver will save the channels and exit automatically. You can begin watching television. Page 1 of 1 (c) Copyright. DTV Solutions Limited For further assistance, you can contact DTV Solutions help line number. 0800 388 765

1B VS- Step 1 T D - DTV S

Download PDF Report

Upload
others
View
1
Download
0

Embed Size (px)

Citation preview

DTV

S-1B

EASY SETUP - QUICK REFERENCE GUIDE

Step 1Select your location or region and press OK.

Step 2Select Yes when asked do you want to scan.

Step 3

The equipment attached to the satellite dish will be detected and the signal strength and quality bars will be shown.

The channel scan will automatically begin once the signal is found.

Step 4

The channels found will be shown. The processcan take a few minutes so please wait untilthe serach is completed.

Step 5Once all the channels are found the receiverwill save the channels and exit automatically.You can begin watching television.

Page 1 of 1(c) Copyright. DTV Solutions Limited

For further assistance, you can contact DTV Solutions help line number. 0800 388 765

r2d3

Text Box

Troubleshooting

r2d3

Text Box

If you get a "Tuning Failed" or "Database Empty" message, please try the following: 1) Check your connections to the satellite dish. 2) Ensure your dish is correctly installed. 3) Retry installation after performing "Factory Default"