19.06.2012Industrial Technologies 2012 - MINAM 2.0 Paving the ground for the second generation of a...
If you can't read please download the document
19.06.2012Industrial Technologies 2012 - MINAM 2.0 Paving the ground for the second generation of a highly effective, application oriented Micro-Nano Manufacturing
19.06.2012Industrial Technologies 2012 - MINAM 2.0 Paving the
ground for the second generation of a highly effective, application
oriented Micro-Nano Manufacturing community in Europe Industrial
Technologies 2012 MINAM 2.0 Professor Svetan Ratchev Director of
Institute for Advanced Manufacturing The University of Nottingham
Developing the Micro and Nano Manufacturing Technologies The MINAM
Strategic Research Agenda and Roadmap
Slide 2
19.06.2012Industrial Technologies 2012 - MINAM 2.0 MINAM
mission: to facilitate the European manufacturers and
equipment-suppliers in establishing and retaining worldwide
leadership in manufacturing micro- and nano-technological products
The MINAM SRAs key objective is to identify emerging trends and
provide strategic directions for future investments in R&D to
accelerate the rapid transition of micro- and nano-manufacturing
technologies from laboratory based prototypes into volume
manufacturing applications... MINAM Micro- and Nanomanufacturing
Mission and Strategic Research Agenda (SRA)
Slide 3
19.06.2012Industrial Technologies 2012 - MINAM 2.0 Approach to
developing the MINAM2.0 SRA and Vision Building on previous
MINAM/Micro-Sapient studies and MINAM SRA (2008-2009) Analysis of
markets and industrial sectors Industrial survey leading to a
revised MINAM roadmap Consulting the wider community through
regional clusters Focused research foresight studies Industrial
validation
19.06.2012Industrial Technologies 2012 - MINAM 2.0 MicroNano
manufacturing enabled components Some figures Non SI based
components are gaining importance
Slide 6
19.06.2012Industrial Technologies 2012 - MINAM 2.0 there are
still dozens of application areas that still need to be explored
and developed further to face grand challenges
Slide 7
19.06.2012Industrial Technologies 2012 - MINAM 2.0 Micro and
Nano Manufacturing Agenda: Horizon2020 Addressing key societal
needs: Climate change Sustainable transport Sustainable industrial
production Sustainable food production and consumption Ageing
population and public health. Supporting the full manufacturing
cycle by providing innovative high added value manufacturing
solutions Design, production, in-service support, decommissioning
and recycling New generations of multifunctional customised
products Micro and nano manufacturing solutions for meso and macro
scale products
Slide 8
19.06.2012Industrial Technologies 2012 - MINAM 2.0 MINAM2.0
Priorities for Horizon 2020 Consolidating and expanding the micro
and nano manufacturing community Focus on meeting industrial needs
and delivering industrial innovation Breakthrough research with
stronger focus on delivering innovation Sustaining and increasing
production capabilities in Europe Focus on growth and value
creation Understanding and addressing the needs of the wider
industrial community via better links with relevant ETPs Addressing
the needs of both established world class EU industrial sectors and
new emerging industries; large companies and SMEs Providing a
balanced representation of industrial needs and research
foresight
Slide 9
19.06.2012Industrial Technologies 2012 - MINAM 2.0 Major
research challenges Light weight, multi material 3D complex
products Continuous miniaturisation of parts and products
Integration of nano, micro, meso and macro scale features and
products for new generations of multifunctional products and
systems Emerging micro and nano production technologies to address
new life science and health care products Maturity and innovation
potential benchmarking of micro and nano manufacturing technologies
Technology affordability Built-in intelligence and IP
protection
Slide 10
19.06.2012Industrial Technologies 2012 - MINAM 2.0 Semi
structured interviews with representatives from selected key player
organisations using tailored survey formats for the three targeted
groups: Comprehensive set of indicators Building the basis for
research commercialisation access Services 16 European Technology
Platforms (application & market requirements, complementary
technological Expertise) 21 Technology Clusters Technological
expertise (mature) Production aspects Cluster Business models 9
Networks of Excellence / European Research Infrastructures
Technological perspective (R&D) Other players in the
Microproduction RA (Eranet, International organisations, etc.*)
MINAM2.0 Phase 1: Collecting the knowledge of multiplicators
Slide 11
19.06.2012Industrial Technologies 2012 - MINAM 2.0
Identification of technological Bottlenecks Equal distribution of
identified challenges over the 5 areas Distribution of bottlenecks
will remain the same over the next years CLUSTER beyond 2015
CLUSTER 2012-2015 ETP beyond 2015 ETP 2012-2015 Source: 2011 MINAM
survey Microcomponents Product Integration Design, Simulation New
Materials Micro Manufacturing Capabilities
19.06.2012Industrial Technologies 2012 - MINAM 2.0 III.4 Other
Bottlenecks update 2012 Similar results to 2011 Survey 15
Slide 16
19.06.2012Industrial Technologies 2012 - MINAM 2.0 Key
Technology areas: Manufacturing of nanoparticles Overview of the
manufacturing of nanoparticles (source MINAM working group
Nanomanufacturing )
19.06.2012Industrial Technologies 2012 - MINAM 2.0 Key Areas of
Development: System Integration Bosch Desktop Assembly System
Slide 20
19.06.2012Industrial Technologies 2012 - MINAM 2.0 Roadmapping
Recommendations - Summary MINAM 2 contributes to the following
aspects: Mass production of functional 3D systems Manufacturing for
custom made parts Automated production of composite
structures/products New processing methods to achieve nano-sized
microstructure components Joining technologies Characterization as
key enabler fr robust nano enabled production Europeanwide
coordination of process and component standardisation Delivery of
new functionalities through (mass production) manufacturing
processes Product life cycle management for advanced materials
Multifunctional manufacturing processes New approaches for
production planning and control Novel supply chain approaches for
innovative products 20