REFERENCESReference Books I. Reinforced Concrete Design of Tall Buildings by Bungale S. TaranathII. Structural Analysis and Design of Tall Buildings Bungale S. TaranathIII. Seismic Analysis of Structures By T. K. Datta IV. Reinforced Concrete Structures by A.K. Jain and B.C. Punmia for design of beams, columns and slabV. S. N. Sinha, Reinforced Concrete Design, Second Edition, 2002Manualsi) Autodesk Robot Structural Analysis Professional - Verification Manual for Indian Codesii) Autodesk Building Design Suite Ultimate 2015- Guide ManualInternational Journals 1. Seismic Behaviour Of Assymetric RC Buildings S.K.Dubey And P.D.Sangamnerkar International Journal Of Advanced Engineering Technology -ISSN 0976-39452. Seismic Retrofit Of Reinforced Concrete Buildings MC Griffith And AV Pinto Joint Research Centre, Ispra Italy - Paper No. 23273. Future trends in earthquake-resistant design of structures Durgesh C. Rai Current science of Seismology - VOL. 79, NO, 9 4. Design of Earthquake resistant multi-storied RCC building on a sloping ground Saptadip Sarkar International Journal Of Earthquake Engineering Technology -ISSN 10968-120685. Seismic Analysis of RC Frame Structure with and without Masonry Infill Walls -Haroon Rasheed Tamboli and Umesh.N.Karadi Indian Journal Of Natural Sciences - ISSN: 0976 0997.6. Design drift requirements for long-period structures Gary R. Searer and Sigmund A. Freeman 13th World Conference on Earthquake Engineering Canada - Paper No. 32927. Analysis of Multi-storey Building Frames Subjected to Gravity and Seismic Loads with Varying Inertia Kulkarni J.G., Kore P. N., S. B. Tanawade International Journal of Engineering and Innovative Technology (IJEIT) ISSN: 2277-37548. Seismic Drift and the Design of Claddings,Proceedings Searer, Gary R. and Freeman, Sigmund of the ASCE Structures Congress and Exposition, 2004.9. Seismic response of reinforced concrete frame buildings with soft first storeys, Arlekar, J., Jain, S.K. and Murty, C.V.R. IIT Kanpur IJAET/Vol.II/ Issue IV10. Effects of vertical irregularities on seismic behavior of building structures, Stanford, Al-Ali, A.A.K. and Krawinkler, H USA. Report No. 130, 1998.11. Alternative method to locate centre of rigidity in asymmetric buildings, Basu, Dhiman and Jain Sudhir K. Earthquake engineering and Structural Dynamics, John Wiley & Sons, Ltd. 2006.12. J.B Seismic resistance of reinforced concrete frame structures designed for gravity loads: performance of structural system, Bracci, J.M., Reinhorn, A.M. and Mander, ACI Structural Journal, Vol. 92(5), pp. 597-609.13. Repair of earthquake-damaged RC columns with FRP wraps, Saadatmanesh, H., Ehsani, M.R. and Jin, L., ACI Structural Journal, Vol. 94(2), pp. 206-215.14. Behavior of existing non seismical detailed reinforced concrete frames, Beres, A., White, R.N., Gergely, P., Pessiki, S.P. and El-Attar Proceedings of the 10th World Conference on Earthquake Engineering, Madrid, A.A. Balkema, Rotterdam, Vol. 6, pp. 3359-3363.15. Seismic performance and retrofit evaluation of reinforced concrete structures, Bracci, J.M., Kunnath, S.K. and Reihnorn, A.M., ASCE Journal of Structural Engineering, Vol. 123(1), pp. 3-10.16. Study of seismic and wind effect on multi storey r.c.c., steel and composite building Baldev D. Prajapati1 & D. R. Panchal International Journal of Advances in Engineering & Technology, Sept. 2013. ISSN: 2231196317. Wind Loading on Tall Buildings P. Mendis, T. Ngo, N. Haritos, A. Hira EJSE Special Issue: Loading on Structures (2007)18. The effect of zone factors on wind and earthquake loads of high-rise structures Dr. K. R. C. Reddy, Sandip A. Tupat IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684, p-ISSN: 2320-334X PP 53-58Indian Standard CodesA) IS: 875 (Part 1), Indian Standard Code of Practice for design loads for building and structures, Dead Loads Bureau of Indian Standards, New Delhi. B) IS: 875 (Part 2), Indian Standard Code of Practice for design loads for building and structures, Live Loads Bureau of Indian Standards, New Delhi. C) IS: 875 (Part 3), Indian Standard Code of Practice for design loads (Other than earthquake) for building and structures, Wind Loads Bureau of Indian Standards, New Delhi. D) IS: 875 (Part 5), Code of Practice for Design Loads (Other Than Earthquake) For Buildings and Structures Part 5 Special Loads and Combinations, Bureau of Indian Standards, New Delhi.E) IS 456:2000, Indian Standard plain and reinforced concrete-Code of Practice, Bureau of Indian Standards, New Delhi, 2000. F) IS: 1893-2002, Part 1, Criteria for Earthquake Resistant Design of Structures -General Provisions and Buildings, Bureau of Indian Standards, New Delhi, India. G) SP.64, Explanatory Handbook on Indian Standard Code of Practice for Design Loads (Other than Earthquake) for Buildings and Structures, Bureau of Indian Standards, New Delhi, India.H) SP.16, Design Aids for Reinforced Concrete to IS 456: 1978, Bureau of Indian Standards, New Delhi, India.I) SP.24, Explanatory Handbook on Indian Standard Code of Practice for Plain and Reinforced Concrete (IS 456:1978), Bureau of Indian Standards, New Delhi, India.J) SP.34, Handbook on Concrete Reinforcement and Detailing, Bureau of Indian Standards, New Delhi, India.

116