18 FOOTRESTS & LICENSE PLATE FRAMES (Pédalier, support de plaques)2011

1061

All part numbers in BOLD MAGENTA are new for 2011.

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1062

PART # DESCRIPTION SUG. RETAILFOR 04-11 XL MODELS1622-0140 Standard position, chrome $414.951622-0349 Standard position, black 389.951622-0141 2” extended, chrome 509.951622-0350 2” extended, black 449.95REPLACEMENT COMPONENTS1622-0143 Shift shaft lever (trans), chrome 27.951622-0351 Shift shaft lever (trans), black 29.951622-0144 Brake pedal, chrome 59.951622-0352 Brake pedal, black 55.951622-0146 Footpegs, chrome (pr.) 42.951622-0353 Footpegs, black (pr.) 42.95

FORWARD CONTROL KITS•Chrome-plated or black anodized steel forward controls

•Replace OEM forward controls or convert from mid-controls

•Include rubber insert footpegs, shift peg and mounting hardware; use stock brake master cylinder

NOTE: Not for use with 2-1 exhaust systems.

1622-0140

1622-0140 Left

1622-0140 Right

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST, FLST MODELSDS-243531 Forward controls (includes 3/4” master

cylinder – Kelsey-Hayes) $483.95DS-243523 2” extended forward controls

(includes 3/4” master cylinder – Kelsey-Hayes) 435.951602-0072 Repl. shift lever shaft 27.951602-0081 Repl. shift lever 33.951610-0013 Repl. brake pedal 64.95FOR 84-94 FXR MODELSDS-243485 Forward controls 281.951602-0073 Repl. shift lever shaft 19.951602-0082 Repl. shift lever 19.951610-0014 Repl. brake pedal 64.95

FORWARD CONTROLS•Updated forward controls come complete with brake and shift forward controls

•Chrome-plated mounts and hardware; come complete with O-ring footpegs

•Will not work with engine guards

NOTE: When installing extended forward controls, check fender clearance before operating.

NOTE: PART #s DS-243531 and DS-243523 require custom brake line.

DS-243531

DS-243485

PART # DESCRIPTION SUG. RETAILFOR L87-03 XL (EXCEPT 883R W/ 2-1 EXHAUST)DS-243528 Forward controls $369.951602-0074 Repl. shift lever 33.951601-0166 Repl. shift linkage kit 56.951610-0015 Repl. brake pedal 33.95

FORWARD CONTROLS WITHOUT PEGS•Kit includes chrome motor mounts, shifter arm, brake pedal, linkage rods for brake and shifter and mounting hardware

•Accept most styles of footpegs and shifter pegs (must be purchased separately)

NOTE: Controls are compatible with 883/1200C styles of exhaust only. Not for use with some types of highway bars.

NOTE: Not for use with 2-1 exhaust systems.

DS-243528

1601-0166

PART # DESCRIPTION SUG. RETAILFOR 91-11 FXD MODELS (EXCEPT FXDF W/ STOCK EXHAUST)1622-0193 Forward controls kit $299.951622-0194 2” extension kit 99.95

FORWARD CONTROL KIT•Sturdy steel construction•Polished with a brilliant chrome finish•Footpegs and shift peg not included; use standard pegs to achieve the look you want

•Use stock rear master cylinder•Includes all necessary mounting hardware•2” extension kit available separately


PART # DESCRIPTION SUG. RETAILFOR 00-06 FXST MODELS1622-0338 Forward controls $574.951603-0099 Repl. shift peg 24.951610-0138 Repl. brake peg 25.951620-0677 Footpegs (pr.) 72.951622-0192 Adapter kit for FXSTD 24.95

FORWARD CONTROLS•Billet-aluminum construction•Polished with a brilliant chrome finish•Includes master cylinder and all necessary mounting hardware•Knurled shift and brake pegs included; footpegs sold separately•Adapter kit for FXSTD available separately

1622-0338

1620-0677

1622-0192

1622-0193

1622-0350

1622-0194


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1063

PART # SUG. RETAIL1622-0148 $830.951622-0149 830.951622-0150 830.951622-0154 830.95

PART # SUG. RETAIL1622-0155 $711.951622-0156 830.951622-0157 830.951622-0158 711.95

PART # SUG. RETAIL1622-0159 $830.951622-0160 830.951622-0161 830.951622-0167 830.95

PART # SUG. RETAILDS-243290 $711.95DS-243292 830.95DS-243296 830.95DS-243505 830.95

PART # SUG. RETAILDS-243506 $830.95DS-243507 830.95DS-243674 830.95DS-243706 711.95

PART # SUG. RETAILDS-243729 $711.95DS-243752 711.95

PRICE LIST

DESCRIPTION CLASSIC SOLID RADIAL SLOTTEDFOR 00-11 FXST, FLSTChrome DS-243296 DS-243292Polished - DS-243290Black 1622-0161 1622-0167FOR 84-99 FXST, FLST, 73-85 FX, FLHChrome DS-243505 DS-243674Polished DS-243706 -

DESCRIPTION CLASSIC SOLID RADIAL SLOTTEDFOR 84-99 FXST, FLST, 73-85 FX, FLH (CONT)Black 1622-0148 1622-0154FOR 91-10 DYNA GLIDEChrome DS-243507 1622-0159Polished DS-243752 1622-0158Black 1622-0150 1622-0160

DESCRIPTION CLASSIC SOLID RADIAL SLOTTEDFOR 84-94, 99-00 FXR, 86-03 XL1

Chrome DS-243506 1622-0156Polished DS-243729 1622-0155Black 1622-0149 1622-01571 XL models require mounting adapter kit

PART #DS-243508 for 86-90 and PART #DS-243509 for 91-03.

BILLET ALUMINUM FORWARD CONTROLS•Available in a chrome, highly polished or black finish

•Shifter and brake pedal adjust to suit individual preference

•Master cylinders feature long-wearing bronze bushings, nylon thrust washers and micro-finished 5/8” bores

•Available in classic and radial designs with wide-band pegs•Made in the U.S.A. with domestic materials

NOTE: 07-10 Softails require the use of a 00-06 kickstand assembly.

NOTE: Must order shifter control rod separately for Big Twin kits, or use a custom rod with 13” to 15” center-to-center length.

NOTE: Shifter control rod is included with XL adapter kit.

NOTE: See footpegs pages later in this section for matching pegs.

DS-243706 Left side

DS-243706 Right side

Classic Solid Polished

1622-0154 Left side

1622-0154 Right side

Radial Slotted Black

DS-243674 Left side

Radial Slotted Chrome


Classic Solid Chrome

DS-243506 Left side


PART # DESCRIPTION SUG. RETAILFOR 00-11 FXST, FLST1622-0163 Chrome $948.951622-0162 Polished 830.951622-0164 Black 948.95

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST, FLST, 85 FX1622-0152 Chrome $948.951622-0151 Polished 830.951622-0153 Black 948.95

J-SERIES FORWARD CONTROLS•Design features internal reservoir and hidden banjo fittings for sleek look

•Constructed of billet aluminum

•Include 9/16” bore master cylinder•Can be mounted with or without crash bar•Stock kick stand can be mounted to controls with included mounting block

•Available in chrome, polished, or black anodized finish•Sold as a set•Made in the U.S.A. with domestic materials

NOTE: 07-10 Softails require the use of a 00-06 kickstand assembly.

1622-0162 Left side


1622-0164 Left side


PART # DESCRIPTION SUG. RETAILFOR 00-11 FXST, FLST1622-0361 Chrome $717.951622-0363 Chrome, multi-band 717.95

PART # DESCRIPTION SUG. RETAILFOR 00-11 FXST, FLST (CONT)1622-0362 Black $717.951622-0364 Black, multi-band 717.95

J-FX FORWARD CONTROLS•Fully-adjustable pegs and pedals to allow for the perfect fit

•Constructed of steel and billet aluminum

•Utilize stock mounts and master cylinder

•All steel components are powder coated black; aluminum components are available with chrome or black anodized finishes

•Sold as a set•Made in the U.S.A.

NOTE: 07-10 Softails require the use of an 00-06 kickstand assembly.

1622-0363 Left side


1622-0362 Left side



WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

J-FL SERIES FORWARD CONTROLS•The style and feel of forward controls designed specifically for baggers and touring models•Constructed of steel and billet aluminum•Utilize stock mounts, pivot points and master cylinder•Can be mounted with or without crash bar•Stock kick stand can be mounted to controls with included mounting block•All steel components have a powder-coat black finish; billet aluminum components are available with chrome or black-anodized finish•Sold as a set•Made in the U.S.A. with domestic materials

1064

PART # DESCRIPTION SUG. RETAILFOR 09-11 FLHT, FLHR, FLHX, FLTR, H-D FL TRIKE1622-0287 Chrome, full rubber $614.951622-0288 Chrome multi-band 614.951622-0289 Black, full rubber 614.951622-0290 Black multi-band 614.95

PART # DESCRIPTION SUG. RETAILFOR 08 FLHT, FLHR, FLHX, FLTR1622-0189 Chrome, full rubber $614.951622-0283 Chrome multi-band 614.951622-0190 Black, full rubber 614.951622-0284 Black multi-band 614.95

PART # DESCRIPTION SUG. RETAILFOR 97-07 FLT, FLHT, FLHR, FLHX, FLTR1622-0165 Chrome, full rubber $614.951622-0281 Chrome multi-band 614.951622-0166 Black, full rubber 614.951622-0282 Black multi-band 614.95

1622-0165 Left side

1622-0165 Right side 1622-0166

Left side

1622-0166 RIght side

1622-0281 Left side


1622-0165Left side1622-0165

Right side

PART # DESCRIPTIONSUG.

RETAILDS-243513 Master cylinder rebuild kit for JayBrake billet

aluminum forward controls w/ 3/4” master cylinder $24.95DS-243463 Master cylinder rebuild kit for JayBrake billet

aluminum forward controls w/ 5/8” master cylinder 24.95DS-243464 Master cylinder rebuild kit for JayBrake J-Series

forward controls w/ 9/16” master cylinder 24.951622-0280 XL adapter kit for 04-11 5-speed w/ rubber-mounted

engine except XR1200 (use w/ FXR model forward control kit) 270.95

DS-243509 XL adapter kit for 91-03 5-speed (use w/ FXR model forward control kit) 270.95

DS-243508 XL adapter kit for 86-90 4-speed (use w/ FXR model forward control kit) 270.95

DS-243511 Stainless steel shifter control rod for Big Twin forward control sets (holes 14” center-to-center) 57.95

DS-243514 Repl. wide band footpeg rubbers (8-pk.) for two footpegs 18.95

DS-243517 Repl. wide band shifter peg rubbers (4-pk.) 8.95DS-243518 Repl. wide band passenger footpeg rubber set (for

two pegs) 18.95

REBUILD KITS, ADAPTERS AND REPLACEMENT PARTS

1622-0280DS-243509

DS-243511

PART # DESCRIPTION SUG. RETAILFOR 00-11 FXST/FLST1622-0180 Stock length, chrome $999.951622-0182 Stock length, black 999.951622-0181 +3” length, chrome 999.951622-0183 +3” length, black 999.95FOR 86-99 FXST/FLST1622-0339 Stock length, chrome 999.951622-0341 Stock length, black 999.951622-0340 +2” length, chrome 999.951622-0342 +2” length, black 999.95

BILLET FORWARD CONTROLS•CNC-machined billet aluminum construction•Sleek design uses lever pivot for footpeg mount•Choose from chrome or black finish•Available in stock, +2” and +3” lengths•Includes footpegs and brake/shifter pegs•Made in the U.S.A.

NOTE: 3” extended kits will require a custom brake line.

NOTE: 07-11 applications will require the use of an 00-06 style kickstand assembly.

1622-0180 Left side


1622-0341 Left side



WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1065

PART # DESCRIPTION SUG. RETAILFOR 00-11 FXST/FLST1622-0345 Chrome $999.951622-0346 Contrast Cut 999.95

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST/FLST1622-0343 Chrome $999.951622-0344 Contrast Cut 999.95

CONTOUR FORWARD CONTROLS•High-quality billet aluminum and steel construction•11/16” master cylinder integrates racing technology in both push rod and piston for less effort at pedal•Fully-adjustable shift lever and brake arm ride on Teflon bearings•Utilizes stock H-D kickstand and return spring unless noted•Brake-side pedal is mounted forward of footpeg for immediate braking response•Includes contour rubber-insert footpegs and toe pegs•Available in chrome and Contrast Cut™ finishes•Contrast Cut finish starts with a polished forward control that has been black anodized, then recut to open up the design

NOTE: 07-11 FXST/FLST models will require the use of a 00-06 kickstand assembly.

PART # DESCRIPTION SUG. RETAILDS-194680 For 00-11 FXST and FLST models $1,049.95DS-194683 For 00-11 FXST and FLST models; 3” extended 1,049.95DS-222814 For 84-99 Softail models 1,049.95DS-222815 For 84-99 Softail models; 3” extended 1,049.95DS-222802 Master cylinder rebuild kit (3/4” bore, late style) 34.95DS-222818 Master cylinder rebuild kit (5/8” bore, early style) 37.950510-0084 Kickstand kit for 07-11 models 99.95

NESS-TECH® CHROME RADIUS FORWARD CONTROL KITS•Radius design with integrated 3/4” master cylinder; feature hidden master cylinder linkage•Available in stock or 3” extended versions; 3” extended for FX, FL and FXST/FLST models only•Footpegs and shifter pegs are not included, must be purchased separately

•Kits require one pair of male mount footpegs and two shifter pegs

NOTE: Footpegs and toe pegs are not included; must be ordered separately.

NOTE: 3” extended kits will require a custom brake line; check fender clearance before operating.

NOTE: 07-11 models require kickstand kit PART #0510-0084; sold separately.

PART # DESCRIPTION SUG. RETAILFOR 00-11 FXST/FLST1622-0170 Chrome $949.951622-0171 Black 949.950510-0084 Kickstand kit for 07-11 models 99.95

RETRO FORWARD CONTROLS•Retro styled forward controls•Available in either show quality chrome or rich black anodizing; black anodized feature machine cuts

•Include custom kickstand mount

NOTE: 07-11 models require kickstand kit.

NOTE: Footpegs and toe pegs not included; must be ordered separately.

NOTE: Check fender clearance before operating.

1622-0170Left side

DS-194680Left side


1622-0171Left side

1622-0170Right side

1622-0343Left side 1622-0343

Right side

1622-0346Left side 1622-0346

Right side

DS-194680Right side

DS-222814Left side

1622-0171Right side


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1066

PART # DESCRIPTION SUG. RETAILFOR 00-10 FXST, FXSTD1622-0010 Gothic; chrome $1,092.951622-0011 Gothic, + 3”; chrome 1,113.951622-0213 Diamond; night series 970.951622-0215 Diamond, +3”; night series 987.95DS-243441 Slotted; chrome 970.951622-0112 Slotted w/ rubber pegs; chrome 970.951622-0214 Slotted; night series 970.95DS-243444 Slotted, +3”; chrome 987.951622-0216 Slotted, +3”; night series 987.95FOR 84-99 FXST, 85-86 FX, FXWG WITHOUT KICKSTAND MOUNT HOLES1622-0221 Diamond; chrome 970.951622-0222 Diamond; night series 970.951622-0217 Diamond, -2”; chrome 970.951622-0218 Diamond, -2”; night series 970.951622-0225 Diamond, +3”; chrome 987.951622-0226 Diamond, +3”; night series 987.951622-0223 Slotted; chrome 970.951622-0224 Slotted; night series 970.951622-0219 Slotted, -2”; chrome 970.951622-0220 Slotted, -2”; night series 970.951622-0227 Slotted, +3”; chrome 987.951622-0228 Slotted, +3”; night series 987.95

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST, 85-86 FX, FXWG1622-0012 Gothic; chrome $1,092.951622-0105 Pearl; chrome 970.951622-0102 Pearl, -2”; chrome 970.951202-1210 Diamond; chrome 970.951622-0206 Diamond; night series 970.951622-0202 Diamond, -2”; chrome 970.951622-0203 Diamond, -2”; night series 970.951622-0208 Diamond, +3”; night series 987.95DS-243451 Slotted; chrome 970.951622-0207 Slotted; night series 970.95DS-243631 Slotted, -2”; chrome 970.951622-0204 Slotted, -2”; night series 970.951622-0209 Slotted, +3”; night series 987.95DS-243067 Slotted w/ rubber pegs; chrome 970.951622-0015 Slotted w/ rubber pegs; black anodized 970.95REPLACEMENT RUBBER INSERTS FOR RUBBER PEGS1904-7540 For shifter/brake peg 8.951904-7541 For folding/male mount footpeg 8.951904-7542 For forward controls/rigid mount footpeg 8.95

FORWARD CONTROLS WITH MASTER CYLINDER•Made from billet aluminum with stainless hardware•3/4” thick mounting plates for superior strength•Feature sealed bearings on the pivot points for smooth operation and no maintenance•5/8” bore master cylinder has radius corners with side-mount brake line fitting•Shifter and brake arms are splined for complete adjustability•Available in standard, 3” extended, or 2” under applications•Also fits most custom frames•Available with a chrome-plated, Night Series or black anodized finish•All Night Series controls feature rubber pegs•Made in the U.S.A.

NOTE: 07-10 FXST models require a 00-06 style kickstand, bracket and spring plate.

NOTE: Master cylinders accept rebuild kit PART #DS-195042.

NOTE: 3” extended versions will require a custom brake line.

NOTE: Applications listed without kickstand mount holes will require a custom kickstand.

1622-0213(Diamond night series)

1622-0214(Slotted night series)

1622-0112(Slottedw/rubberpegs)

1622-0015(Slottedw/rubberpegs, black)

1622-0208(Diamond night series)

1622-0206(Diamondnight series)

1622-0221(Diamond chrome)

1622-0102(Pearl)

DS-243451(Slotted)

1622-0207(Slotted)


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1067

FORWARD CONTROLS WITH HYDRAULIC FOOT CLUTCH•CNC-machined from 6061 T-6 aluminum with hardware

•3/4” mounting plates for superior strength•Hydraulic foot clutch frees left hand for operation of hand shifter

•All feature 5/8” bore master cylinders with radius corners and side-mount banjo bolt brake line fittings

•Clutch and brake arms are adjustable•Improved alternative for foot operation of clutch compared to mechanical linkage when using jockey shifter•Feature sealed bearings on the pivot points for smooth operation and no maintenance•Available with a chrome-plated or Night Series finish•Made in the U.S.A.

NOTE: Controls have no provisions to mount an OEM kickstand, must use mid- or rear-mount kickstand.

NOTE: Controls will require a custom brake line and clutch hose.PART # DESCRIPTION SUG. RETAILFOR 86-99 SOFTAILS AND CUSTOM APPLICATIONS1622-0027 Diamond; chrome $1,050.95

PART # DESCRIPTION SUG. RETAILFOR 86-99 SOFTAILS AND CUSTOM APPLICATIONS (CONT)1622-0205 Diamond; night series $1,050.95

PART # DESCRIPTION SUG. RETAILFOR 91-11 DYNA GLIDEDS-243402 Milled; chrome $810.95DS-243078 Slotted; chrome 810.951622-0201 Slotted; night series 810.951622-0199 Diamond; chrome 810.951622-0200 Diamond; night series 810.95FOR 84-94 FXRDS-243076 Slotted; chrome 810.95FOR 09-11 FLHT, FLHX, FLHR, FLTR AND H-D FL TRIKE1622-03543, 4 Diamond, +6”; chrome 884.951622-03553, 4 Diamond, +6”; night series 884.951622-03563, 4 Slotted, +6”; chrome 884.951622-03573, 4 Slotted, +6”; night series 884.95FOR 97-08 FLHT, FLHX, FLHR, FLTR1622-02311, 4 Slotted, +5”; chrome 953.95

PART # DESCRIPTION SUG. RETAILFOR 97-08 FLHT, FLHX, FLHR, FLTR (CONT)1622-02321, 4 Slotted, +5”; night series $953.951622-02352, 4 Slotted, +9”; chrome 953.951622-02362, 4 Slotted, +9”; night series 953.951622-02291, 4 Diamond, +5”; chrome 953.951622-02301, 4 Diamond, +5”; night series 953.951622-02332, 4 Diamond, +9”; chrome 953.951622-02342, 4 Diamond, +9”; night series 953.951 Recommended for riders with 34” inseam or less. Moves foot position

rearward 5” from standard floorboard position. Will not fit with crash bar.2 Recommended for riders with 35”+ inseams. Moves foot position

forward 9” from standard floorboard position. Will not fit with crash bar.3 Recommended for riders with 30” + inseams. Moves foot position

forward 6” from standard floorboard position. Will fit with crash bar.4 Kit does not include swivel joints, shift or brake rods.

FORWARD CONTROLS•CNC-machined from 6061 T-6 aluminum•3/4” mounting plates for superior strength•Feature sealed bearings on the pivot points for smooth operation and no maintenance

•Assembled with chrome hardware, kit comes ready to install

•Used with existing stock master cylinder•Includes foot and toe pegs, mounting hardware and instructions

•Available with a chrome-plated or Night Series finish•Made in the U.S.A.


PART # DESCRIPTION SUG. RETAILFOR 85-86 FX, FXWG, 84-99 FXST AND CUSTOM FRAMES1622-0138 Standard length $718.951622-0139 3” extended length 743.95

PHANTOMZ FORWARD CONTROLS•High-quality chrome billet•Available in standard and 3” extended length•Include footpegs, shift/brake pegs, a 5/8” bore master cylinder and mounting hardware

•Shift linkage rod is not included; must be ordered separately

NOTE: Controls will require a custom brake line. Matching passenger pegs PART #1620-0290 available separately.


1622-0027

1622-0205

DS-243076

1622-0355 1622-0356

1622-0236

1622-0230

1622-0138


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1068

FORWARD CONTROLS•Main components are designed to fit with existing shapes on the engine, primary and frame for smooth, flowing style

•Flush countersunk fasteners on all mounting plates for a clean, uncluttered appearance

•All ball joints, linkages and visible hardware have a beautiful chrome finish

•Igus shifter bearings provide smooth, maintenance-free operation

•Available in standard and extended lengths (standard recommended for riders with an inseam of 33” or less)

•Footpegs and shift lever sold separately

NOTE: Forward controls are not compatible with most engine guards.PART # DESCRIPTION SUG. RETAILFOR 91-11 DYNA GLIDE (EXCEPT FXDF, 10-11 FXDWG W/OEM EXHAUST)1622-0058 Standard forward controls $399.95

PART # DESCRIPTION SUG. RETAILFOR 91-11 DYNA GLIDE (EXCEPT FXDF, 10-11 FXDWG W/OEM EXHAUST) (CONT)1622-0059 3” extended forward controls $399.95

DEAD END FORWARD CONTROLS•Manufactured from 6061 T-6 billet aluminum; finished with high-quality show chrome•Comes with ball-milled or flamed Dead End shifter and foot pegs•Pegs fold up using ball and spring detent•3/4” bore master cylinder with hidden side mount for brake line •Thunder Cycle logo 3-D machined on master cylinder cover•Made in the U.S.A.

NOTE: 07-11 applications will require the use of a 00-06 kickstand assembly.PART # DESCRIPTION SUG. RETAILFOR 00-11 FXST/FLST1622-0176 Ball-milled $884.951622-0179 Flamed 884.95FOR 86-99 FXST/FLST1622-0174 Ball-milled 884.95

PART # DESCRIPTION SUG. RETAILFOR 86-99 FXST/FLST (CONT)1622-0175 Ball-milled, 2” extended $884.951622-0177 Flamed 884.951622-0178 Flamed, 2” extended 884.95

PART # DESCRIPTION SUG. RETAILFOR 86-99 SOFTAIL1622-0285 Polished $432.951622-0286 Chrome 606.95

PART # DESCRIPTION SUG. RETAILFOR 86-99 SOFTAIL (CONT)1622-0360 Gloss black $489.95

FORWARD CONTROLS•CNC-machined from billet aluminum•Unique design and features make these controls a must-have upgrade for your stock or custom motorcycle

•Made in the U.S.A.

1622-0058

1622-0176

1622-0179

1622-0286Left

1622-0360Left

1622-0286Right

1622-0360Right


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1069

PART # DESCRIPTION SUG. RETAILFOR 00-10 FXST/FLST MODELS1622-0099 Chrome $979.951622-0100 Black 979.95

PART # DESCRIPTION SUG. RETAILFOR 87-99 FXST/FLST MODELS1622-0097 Chrome $979.951622-0098 Black 979.95

FORWARD CONTROL KITS•Features an 11/16” bore master cylinder that is compatible with most stock and aftermarket rear calipers•Flush mount reservoir lid and 3-D contoured master cylinder with hidden brake line mount•Shifter side control with kickstand mounting holes•Sealed roller bearings at all pivot points for smooth operation and lasting durability•Matching foot and shifter pegs included; in a folding style with rubber inserts•Made in the U.S.A.

NOTE: 07-10 applications will require the use of a 00-06 kickstand assembly.

PART # DESCRIPTION SUG. RETAILFOR 84-99 SOFTAILDS-243196 Forward controls $609.95OPTIONAL/REPLACEMENT COMPONENTSDS-375155 161/8” shifter rod 84.95DS-375156 135/8” shifter rod 83.95DS-253012 Repl. brake/shifter rubbers (6-pc. set) 12.95DS-243823 1/2” shifter spacer 26.95DS-243824 1/2” brake spacer 28.95DS-243828 3/4” shifter spacer 30.95DS-243829 3/4” brake spacer 30.95

FOR 84-99 FXST/C, 86-99 FLST/C/F/N AND 85-86 FX/FXWGPART # DESCRIPTION SUG. RETAILFORWARD CONTROLSDS-243203 W/ toe shifter only $838.95DS-243204 W/ heel and toe shifter 838.95OPTIONAL/REPLACEMENT COMPONENTSDS-375156 135/8” shifter rod 83.95DS-253012 Repl. brake/shifter rubbers (6-pc. set) 12.95SPACERSDS-243823 1/2” shifter spacer 26.95DS-243824 1/2” brake spacer 28.95DS-243828 3/4” shifter spacer 30.95DS-243829 3/4” brake spacer 30.95

FORWARD CONTROLS•Chrome billet aluminum with cutout design•Include a 3/4” bore master cylinder•For offset engines, forward control spacers available separately in 1/2” and 3/4” thicknesses

•Optional matching passenger pegs and shifter rod available; replacement components sold separately


NOTE: Check fender clearance on FL models before operating.

FORWARD CONTROLS WITH FLOORBOARD MOUNTS•Chrome billet aluminum with a 3/4” bore master cylinder•Available with toe shifter only or with heel/toe shifter•Will accept any stock style 86-99 FLST floorboards•Optional passenger footpegs and shifter rod available separately

•Spacers available separately for offset motors; sold each•Made in the U.S.A.

1622-0100

1622-0097

DS-375155

DS-243196

DS-243203

DS-243823

DS-243823

DS-243824

DS-243824


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

FORWARD CONTROL EXTENSION KITS•Move the OEM controls forward 2” or 3” for more leg room

•Use stock footpegs, brake lever, shift lever and shift arm

•Kits include black powder-coated aluminum adapter plates, stainless steel extended shifter rod and mounting bolts

•Use 3” extensions for people 6’ 3” and taller•Made in the U.S.A.

NOTE: Extended rear brake line must be purchased separately; for Drag Specialties brake line kits, see pages 895-896.

1070

PART # DESCRIPTION SUG. RETAILDS-243486 For L87-99 FXST (except FLST) $212.95

FORWARD CONTROL RELOCATION KIT•Polished chrome kit relocates the footpegs, brake lever and shifter lever almost 3” further forward to offer a more comfortable riding position

•Comes complete with chrome brake and shifter plates and all the chrome hardware needed to mount the assemblies and kickstand

•Uses original stock footpegs, brake lever, shifter lever and shifter arm•Instructions included

PART # DESCRIPTION SUG. RETAIL1601-0206 For all 07-10 FXST $199.951601-0167 For all 00-06 FXST 199.95

3” FORWARD CONTROL EXTENSION KITS•Moves the OEM controls forward almost 3” for a more comfortable riding position

•Kit includes black anodized billet aluminum adapter plates, extended stainless-steel rear brake line, extended shifter rod, kickstand spring pin and necessary hardware

•Uses stock footpegs, brake lever, shift lever and shift arm•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1622-0079 For 93-02 FXDWG and any Dyna models using

H-D forward controls (OEM #49080-93A) $199.95

EXTENSION KIT•Moves the stock Dyna Wide Glide controls a full 3” further forward

•Kit includes extension plates, countersunk trim plates, linkages and all necessary hardware

•All components are show-chromed•Requires only basic hand tools to install

PART # DESCRIPTION SUG. RETAILDS-243020 Standard extension kit for 00-06 FXST $219.95DS-243021 Deluxe extension kit for 00-05 FXST 329.95

FORWARD CONTROL EXTENSIONS•Moves your stock controls forward 3” for a more comfortable ride

•Standard style includes extension plates with stainless steel shift rod and stainless steel brake line

•Deluxe style includes extension plates, stainless steel brake line and billet aluminum shifter rod


PART # DESCRIPTION SUG. RETAILFOR 00-10 FXST AND FXSTDDS-243458 2” forward control extension $119.95DS-243459 3” forward control extension 119.95

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST, FXWG1622-0078 Black-anodized $167.951622-0198 Chrome 167.95

3” FORWARD CONTROL EXTENSION KITS•Extend forward controls with forward-mount master cylinders by 3”

•Extension plates are billet aluminum with a chrome or black-anodized finish

•Include mounting hardware and shifter rod•Made in the U.S.A.

NOTE: Will require the use of a 3” extended rear brake line.

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST1622-0241 13/8” back; black $119.951622-0242 13/8” back; chrome 119.95FOR 91-11 DYNA MODELS1622-0239 11/8” back and 1” up; black 119.951622-0240 11/8” back and 1” up; chrome 119.95FOR 84-94 FXR1622-0237 13/8” back; black 119.951622-0238 13/8” back; chrome 119.95

KICK-BACK ADAPTER PLATES•CNC-machined billet aluminum plates move forward controls backward for shorter riders

•Bolt to the frame where the controls mount from the factory•Sold in pairs•Made in the U.S.A.

NOTE: Dyna needs 11/8”, FXR/FXST models need 13/8” clearance between exhaust and controls, and between primary and controls, for these to work; may also need to shorten shift and brake rods depending on controls configuration.

PART # DESCRIPTION SUG. RETAIL1622-0060 For 00-11 Softail $130.95

FORWARD CONTROL ADAPTER PLATE KIT•Backing plate adapter kit allows mounting of 84-99 forward controls onto stock 00-11 Twin Cam Softail frames

•Billet aluminum construction with black anodized finish, includes hardware


PART # DESCRIPTION SUG. RETAILDS-243022 For 84-99 Softail models and most

aftermarket frames $139.95

2” FORWARD CONTROL EXTENSION•Extends forward controls with forward mount master cylinder by 2”

•Black anodized and compact in design


NOTE: May require the use of a custom brake line.

DS-243459

1622-02421622-0240

1622-0238

1601-0206

DS-243020 DS-243021

1622-0078


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1071

PART # DESCRIPTION SUG. RETAIL7808-2001 For 00-10 FLSTC, FLSTF, FLSTS $129.951622-0005 For 86-99 FLST 199.95

GO-FORWARD 2” FLOORBOARD EXTENSION KIT•Moves floorboards, shifter and brake forward 2”

•Utilizes stock floorboards, shift lever, shifter arm and brake arm

•Black powder-coated aluminum extension plates, stainless steel extended shift rod and necessary mounting hardware included

•Extended rear brake line must be purchased separately; Drag Specialties brake line kit PART #s 1741-0175 or 1741-0707


NOTE: Will not work with engine guards, except on FLSTF or highway bars; designed for use with stock fenders, brake pedals and shift levers

NOTE: Installation of this kit may cause interference between front fender and floorboards. Check clearance of fender and floorboards with front fork compressed and extended.

PART # DESCRIPTION SUG. RETAILFOR 00-06 FXSTDS-243155 Forward control conversion kit $454.95

CHROME BILLET FORWARD CONTROL CONVERSION KIT•Turns your stock forward controls into billet-style controls

•Uses OEM backing plates and linkage•Kit includes brake pedal, shift lever with peg, inner shifter arm, footpegs and chrome mounting hardware


PART # DESCRIPTION SUG. RETAILFOR 00-11 FLST AND 97-07 FLT/FLHT/FLHR/FLHX/FLTR1622-0368 Deep Cut, chrome $499.951622-0369 Deep Cut, black 499.951622-0370 Retro, chrome 469.95

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT/FLHR/FLHX/FLTR1622-0365 Deep Cut, chrome $499.951622-0366 Deep Cut, black 499.951622-0367 Retro, chrome 469.95

BRAKE/HEEL/TOE SHIFTER KITS•Complete brake and shifter set•Carved from billet aluminum•Choose from Deep Cut or Retro style

PART # DESCRIPTION SUG. RETAILFOR 02-10 VRSCA/B V-ROD1621-0001 Silver $225.951621-0023 Black 225.95

ROAD-ROD® DRIVER FLOORBOARD BRACKET KITS•Allow for the installation of FLT/FLST style floorboards on a V-Rod without modifications

•Front brackets are made of aluminum with a polished finish•Rear brackets are made from steel with a powder-coated finish•Made in the U.S.A.

NOTE: Floorboards are not included; must be purchased separately. For front boards only. Rear not available.

NOTE: Does not fit Night Rod model VRSCD, Muscle or Street Rod.

PART # DESCRIPTION SUG. RETAILFOR 86-99 FLSTDS-530613 Left front floorboard mounting stud;

repl. OEM #50989-86 $9.95DS-530614 Left rear floorboard mounting bracket;

repl. OEM #50990-86B 39.95

FORWARD CONTROLS/FLOORBOARD MOUNTING BRACKETS•Chrome finish OEM-style components

PART # DESCRIPTION SUG. RETAILFOR 00-10 FXST, 08-11 FXCX/C, 03-08 FXDWG, 08-11 FXDF W/ FORWARD CONTROLS AND 04-10 XL883C/1200C1622-0358 13/4” forward control peg mount extender (ea.) $29.951622-0359 13/4” forward control peg mount extender (pr.) 72.95

FORWARD CONTROLS FOOTPEG MOUNT EXTENDERS•Extends the driver’s footpegs out an additional 13/4”

•Mount to the existing clevis on your Küryakyn or other forward controls•Adds clearance around protruding air cleaners

1622-0368

7808-2001

1622-0005

1622-0369

1622-0370

1622-0370

1621-0001DS-530613

DS-530614

1621-0023

1622-0359

Shift side Brake side


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1072


RETAILRECTANGULAR1621-0102 Driver floorboards for 84-11 FLT, FLHT, FLHR, FLTR,

H-D FL Trike, 87-11 FLST, chrome $499.951621-0103 Passenger floorboards for 87-11 FLT, FLHT, FLHR,

FLTR, H-D FL Trike, chrome 399.95SEMI-CIRCLE1621-0104 Long driver floorboards for 84-11 FLT, FLHT, FLHR,

FLTR, H-D FL Trike, 86-11 FLST, chrome (18” L) 519.951621-0105 Long driver floorboards for 84-11 FLT, FLHT, FLHR,

FLTR, H-D FL Trike, 86-11 FLST, black (18” L) 519.95


RETAILSEMI-CIRCLE (CONT)1621-0162 Short driver floorboards for 84-11 FLT, FLHT, FLHR,

FLTR, H-D FL Trike, 87-11 FLST, chrome (12” L) $499.951621-0163 Short driver floorboards for 84-11 FLT, FLHT, FLHR,

FLTR, H-D FL Trike, 87-11 FLST, black (12” L) 499.951621-0106 Passenger floorboards for 87-11 FLT, FLHT, FLHR,

FLTR, H-D FL Trike, chrome 449.951621-0107 Passenger floorboards for 87-11 FLT, FLHT, FLHR,

FLTR, H-D FL Trike, black 449.95

CHROME BILLET FLOORBOARDS•CNC-machined chrome billet aluminum construction•Driver and passenger floorboards available•Available in rectangular and semi-circle styles•Use OEM hardware•Sold in pairs•Matching rear brake pedal, dash covers and saddlebag latch covers available separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILBLACK1621-0241 Driver boards for 84-11 FLT, FLHT, FLHR, FLTR,

H-D FL Trike, 86-11 FLST $496.951621-0243 Passenger boards for 87-11 FLT, FLHT, FLHR, FLTR 424.95CHROME1621-0242 Driver boards for 84-11 FLT, FLHT, FLHR, FLTR,

H-D FL Trike, 86-11 FLST 496.951621-0244 Passenger boards for 87-11 FLT, FLHT, FLHR, FLTR 424.95

ELITE FLOORBOARDS•Distinct, custom style with a larger-than-stock size for increased comfort•Constructed of 6061 T-6 billet aluminum with rubber inserts•Driver floorboards measure 18” x 5”; passenger floorboards measure 11” x 31/2”•Easy to install•Available with chrome or black-anodized finish•Sold in pairs•Matching shifter pegs with chrome or black-anodized finish available separately•Made in the U.S.A.

1621-0241 1621-0243

1621-0242

1621-0244

1603-0135

1621-0102

1621-0103

1621-0104 1621-0105 1621-0162

1621-0163 1621-0106 1621-0107

PART # DESCRIPTION SUG. RETAILFOR ALL H-D MODELS W/ 5/16-24 THREADED PEGS1603-0134 Black $71.951603-0135 Chrome 71.95

FLOORBOARDS

SHIFTER PEGS


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1073

PART # DESCRIPTION SUG. RETAILFOR 84-11 FLT/FLHT/FLHR/FLTR/H-D FL TRIKE AND 86-11 FLST1621-0260 Driver floorboards, chrome $499.951621-0257 Driver floorboards, black 499.951621-0262 Driver floorboards repl. rubber 8.95FOR 93-11 FLT/FLHT/FLHR/FLTR/H-D FL TRIKE1621-0259 Passenger floorboards, chrome 399.951621-0256 Passenger floorboards, black 399.95

PART # DESCRIPTION SUG. RETAILFOR 93-11 FLT/FLHT/FLHR/FLTR/H-D FL TRIKE (CONT)1621-0263 Passenger floorboards repl. rubber $5.95FOR FLHX/UNIVERSAL WITH MALE MOUNT FOOTPEG STYLE1621-0261 Passenger floorboards, chrome 399.951621-0258 Passenger floorboards, black 399.951621-0263 Passenger floorboards repl. rubber 5.95

DEEP CUT FLOORBOARDS•Machined from two pieces of billet aluminum to create a cutting-edge see through design•Adds exceptional style and comfort to your bike•Available in chrome or black anodized finish•Includes all mounting hardware•Driver floorboards: 16” L x 5.75” W x 1” thick; Passenger floorboards: 7” L x 4” W x 1” thick

PART # DESCRIPTION SUG. RETAILFOR 84-11 FLT/FLHT/FLHR/FLTR/H-D FL TRIKE AND 86-11 FLST1621-0173 Driver floorboards $399.95FOR 93-11 FLT/FLHT/FLHR/FLTR/H-D FL TRIKE1621-0174 Passenger floorboards 319.95

RETRO FLOORBOARDS•Constructed from chrome-plated billet aluminum•Full-length rubber inserts offer excellent grip and comfort

•Styled to match Ness Retro line•Driver floorboards: 18” L x 6” W x .75” thick; Passenger floorboards: 7” L x 4” W x .75” thick

PART # DESCRIPTION SUG. RETAILDS-254453 For 84-11 FLT/FLHT/FLHR/FLTR/H-D FL Trike

and 86-11 FLST models $499.95

RADIUS TEARDROP BILLET FLOORBOARD KIT•CNC-machined from billet aluminum and then show-chrome-plated

•Kit consists of floorboards, rubber inserts, mounting brackets and hardware

•Radius-style floorboards complement the radius styling of other Ness products

•Measure 19” L x 5” W•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-11 FLT, FLHT, FLHS, FLHR, H-D FL TRIKES AND 86-10 FLST ORIGINALLY EQUIPPED W/ FLOORBOARDSDS-254434 181/2” $311.95DS-254435 133/4” 227.95FOR 94-11 FLT, FLHT, FLHS, FLHR AND H-D FL TRIKES ORIGINALLY EQUIPPED W/ REAR FLOORBOARDSDS-254436 Rear board covers 171.95

BANANA BOARDS•Bowed floorboards feature machined billet construction, chrome-plated finish with black rubber inserts and bright finish rivets

•Standard Banana Boards are available in two lengths: 181/2” and 133/4”•Extended Banana Boards allow the foot to rest beyond the shifter and brake pedals•Optional banana shifter pedal and footpegs are designed to match floorboards; sold separately•Matching highway/passenger peg available separately•Matching rear board covers are also available separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1621-0028 For 02-06

VRSCA/B V-Rod $266.95

SPORT FLOORBOARDS•Polished billet aluminum construction

•Rubber inlay and rivets match “Banana Boards” look

•Fully adjustable•Fits any stock peg mount•Made in the U.S.A.

1621-0260 1621-0257 1621-0259

1621-0253

1621-0254

1621-02581621-0256

1621-0173

1621-0174

DS-254434

DS-254435 1603-0047

1603-0071

PART # DESCRIPTION SUG. RETAILOPTIONAL PEDALS AND PEGS1603-0047 Banana shifter pedal $76.951603-0071 Male-mount footpegs 185.95

PART # DESCRIPTION SUG. RETAILFOR 80-11 FLT, FLHT, FLHR, FLHX, FLTR AND H-D FL TRIKES1621-0253 203/4”; chrome $392.951621-0254 203/4”; black 392.95

EXTENDED LENGTH BANANA BOARDSSTANDARD BANANA BOARDS


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

ADJUSTABLE FL PASSENGER SHORTBOARDS•Personalize these adjustable floorboards to suit your needs

•Choose between 42 different settings•Provides up to 61/2” more leg room•Multiple tilt angles provide stress relief in the thighs, calves and ankles

•Polished and chromed construction•Comfort and solid foot support is provided by the 81/2” x 31/2” surface area and vibration-reducing anti-slip rubber pads

•Boards fold up when not in use•Matching Rider LongBoards are available for a great custom look; see above•Made in the U.S.A.

1074

PART # DESCRIPTION SUG. RETAIL1621-0088 ISO board driver or passenger kit $199.951621-0144 ISO board passenger kit 208.951620-0671 Splined adapter mounts (pr.) 23.95

ISO® BOARD KIT•Kit includes a pair of ISO® passenger floorboards and a cast bracket to connect the board to a Küryakyn splined adapter mount (sold separately)

•Designed for use on models with passenger pegs•Not recommended for use on passenger peg mounts that attach to the motorcycle with only a single fastener

•PART #1621-0088 recommended for driver or passenger use; check operation of shift lever and brake pedal after installation

•PART #1621-0144 elevates the floorboard approximately 11/4” higher than the stock position; recommended for passenger use only

PART # DESCRIPTION SUG. RETAIL1904-0016 ISO™-Boards for 86-11 FLST

and 84-11 FLT and H-D FL Trike models $299.951904-0017 ISO™ Passenger Boards for 93-11 FLT

and 93-11 FLST models w/ H-D accessory floorboard kits 189.95

ISO™-BOARDS AND ISO™-PASSENGER BOARDS•Feature super-comfortable ISO™-Ribs that run the full length of the board

•ISO™-Boards measure 15” overall length and offer several different foot positions for the driver

•ISO™ Passenger Boards were designed specifically to match the ISO™-Boards

•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 86-11 FLST AND 84-11 FLT/FLHT/FLHR/FLTR/H-D FL TRIKE MODELS1621-0133 Solid $299.951621-0134 Enferno 299.95

ADJUSTABLE FL RIDER LONGBOARDS•Provides better rider comfort by improving foot and leg positioning•Five quick adjustment positions to suit your needs•Increased leg room improves leg and knee comfort•Expanded foot positioning is provided by 13” length, tapering from 4” wide down to 23/8”•Narrowed design allows for greater lean angles without the risk of touching down•Polished and chromed billet aluminum construction•Includes stylized vibration-reducing rubber inlays and replaceable rub strips and rubber pads•Easy to install•Matching passenger ShortBoards available for a great custom look; see below•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 93-11 FLT/FLHT/FLHR/FLTR/H-D FL TRIKE MODELS1621-0129 Solid $299.951621-0130 Enferno 299.95

PART # DESCRIPTION SUG. RETAIL1622-0243 For 93-09 FLT/FLHT/FLHR/FLTR models $69.95

PASSENGER FLOORBOARD TALL COMFORT KIT•Utilizes your stock floorboards•Choose from six “comfort” positions of height and tilt

•Provides up to 21/2” of additional leg room and widens the floorboards 11/2” to help ease hip stress

•Relieve calf stress by tilting the rear of the floorboards

•Relaxes your knees to reduce joint stress

•Install and adjust in minutes•Made in the U.S.A.

1621-0129

1621-0133 1621-0134

1621-0130

1621-0088 1621-0144

1904-0016 1904-0017

PART # DESCRIPTION SUG. RETAIL1621-0245 For 93-09 FLT/FLHT/FLHR/FLTR models $89.95

PASSENGER FLOORBOARD SHORT COMFORT KIT•Provides two additional floorboard positions

•Approximately 11/4” to 2” higher than the highest stock setting

•The tilted position places the floorboards at an ergonomic plane relieving stress in the legs and calves

•This tilted position also allows the passenger to push into the boards when cornering which provides a more secure feeling

•Provides two additional spacing widths to add additional comfort by placing the floorboards wider apart

•The wider position allows passengers to relax their lower body which takes pressure off of the inner thighs, knees and lower back



WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1075


RETAILFRONT606-4100 For all 86-11 Softail models w/ OEM front floorboards $199.95606-4100 For all 86-11 Dresser/H-D FL Trike models

w/ OEM front floorboards 199.95

SWEPT FRONT AND REAR FLOORBOARDS•Timeless form, quality and function•Expansive foot resting area with comfortable rubber inserts

•Front floorboards made of stamped steel then chrome plated and polished to a show-quality finish; use OEM floorboard mounts

•Rear floorboards made of CNC-machined billet aluminum then chrome plated and polished to a show-quality finish; use OEM passenger peg mounts

•Both front and rear floorboard mounts rotate, then you can lock them in the most comfortable riding position•Quick, easy installation – just bolt them on, adjust them and ride

PART # DESCRIPTION SUG. RETAILFOR 86-11 FLT, FLHT, FLHS, FLTR, FLHR, H-D FL TRIKES AND FLSTDS-254413C Billet aluminum floorboards $303.951621-0097 Billet aluminum passenger floorboard inserts 165.95

BILLET ALUMINUM FLOORBOARDS•Machined from 6061 T-6 billet aluminum, then ball-end milled and triple chrome plated for a custom look

•Bolt directly on top of stock boards•Include all mounting hardware•Available in a chrome finish•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-254411 Floorboards w/ damper for 84-11 FLT, FLHT and

H-D FL Trike; 86-11 FLSTC; 90-11 FLSTF, FLSTN; repl. OEM #50621-79A $61.95

DS-254402 Repl. rubber pad w/ dampers for driver floorboards for 91-11 FLT, FLHT, H-D FL Trike and 91-11 FLSTC, FLSTF, FLSTN; repl. OEM #50614-91 (ea.) 25.95

DS-254409 Repl. rubber only for floorboards w/ damper for DS-254411; repl. OEM #50614-66 (pr.) 10.95

FLOORBOARDS•High-quality replicas of OEM floorboards•For stock mounting brackets on several H-D models

PART # DESCRIPTION SUG. RETAILDS-254412 For 84-10 FXST, FXSTC, FXSTS and

85-86 FXWG, plus most bikes w/ clevis-style footpeg mounts $124.95

BOLT-ON ADJUSTABLE FLOORBOARDS•Complete kit; fully adjustable floorboards

•Allow approximately 7” of fore and aft adjustment; also offer foot angle and height adjustability

•All hardware, brackets and floorboards feature heavy-duty construction and chrome plating

•Available in Damper stylePART # DESCRIPTION

SUG. RETAIL

W/ VIBRATION INSERTS1621-0160 Chrome $61.951621-0164 Black 61.95


RETAILW/O VIBRATION INSERTS1621-0161 Chrome $58.951621-0165 Black 58.95

HALF-MOON FLOORBOARDS•Retro styling for modern rides

•Chrome or gloss-black powdercoat finish available

•Available with vibration isolation inserts or plain for a low-profile look

•Install in stock location•Use OEM brackets and hardware•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 84-11 FLT/FLHT, H-D FL TRIKE, 86-11 FLST MODELS1621-0203 Chrome $389.951621-0204 Black anodized 389.95

FLOORBOARDS•CNC-machined billet aluminum construction•Slim, thin design enhances look and adds 1/2” more ground clearance in cornering over stock

•Adjustable mounting options: stock, 1” back, or 1” forward

•Accept stock pads; pads not included•Sold in pairs•Made in the U.S.A.

FOR 84-11 FLT, FLHT AND H-D FL TRIKE; 86-11 FLSTC; 90-11 FLSTF, FLSTN (REPL. OEM #50621-79A)


RETAILREAR606-4602 For all 00-11 Softail models (except FLSTS/FXSTD/FLSTF) $299.95606-4604 For all 00-11 Fat Boy models 299.95606-4600 For all 87-11 Dresser/H-D FL Trike models

(except FLHRS/SI) 299.95

606-4100

DS-254413C 1621-0097

1621-0164

1621-0165

1621-0203

1621-0204

DS-254411

606-4600Down

606-4600Up


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1076

CONTOUR FLOORBOARDS•Machined aluminum body with billet hinges•Foot-cushioning rubber pad•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-11 FLT/FLHT/H-D FL TRIKE, 86-11 FLST1621-0229 Driver floorboard, chrome $369.951621-0248 Driver floorboard, black 369.95

PART # DESCRIPTION SUG. RETAILFOR 86-11 FLT, H-D FL TRIKE, FLST1621-0230 Passenger floorboard, chrome $349.951621-0249 Passenger floorboard, black 349.95

1621-0229 1621-0248 1621-0230 1621-0249

DRIVER FLOORBOARDS•CNC-machined from 6061 billet aluminum

•Feature reverse-cut design with a raised, diamond-cut center for increased traction

•Available with chrome or black-anodized finish


PART # DESCRIPTION SUG. RETAILFOR 86-11 FLST, 84-11 FLT/FLHT/H-D FL TRIKE1621-0200 Chrome $399.951621-0201 Black 399.95

1621-02001621-0201

PASSENGER FLOORBOARDS•Fit on lower frame tube and mount at the frame

•Come complete with rubber pads; mounting hardware not included

•Sold in pairs

NOTE: May require some spacing on custom exhaust applications.

NOTE: Not for kickstart models.

PART # DESCRIPTION SUG. RETAILFOR 85-86 FL, FXWGDS-720265 Chrome passenger floorboards $61.95DS-720270 Repl. rubber pads (pr.) 12.95

PASSENGER FOOTRESTS•Billet aluminum construction with a show chrome finish

•Non-slip, raised, ribbed rubber pads add comfort on long rides•Fold-up design for added convenience•Style blends smoothly with the lines of your bike•Measure approximately 61/4” L x 31/2” W•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1621-00761 For Softail-style frames w/ 1/2” mounting holes $241.951621-0077 For 99-09 FLHT, FLHR, FLTR 286.951 Requires drilling two holes for dowel pins that prevent footrests from

rotating after installation; instructions and template included.

PASSENGER CRUISE BOARD KIT•High-quality chrome passenger cruise boards with heavy-duty rubber pads

•Allow 360° rotation for personalized mounting•Mounting hardware included•Measure 4” W x 6” L

PART # DESCRIPTION SUG. RETAIL1621-0049 For Dyna Glide, FXRS and VRSCA/B $179.95

PART # DESCRIPTION SUG. RETAIL1621-0198 Black $329.951621-0199 Chrome 329.95

MINI FLOORBOARDS•CNC-machined from 6061 billet aluminum•Fits most forward controls and universal mounting•Rigid mounting with 3/8”-16 mounting bolt•Allows more foot movement compared to conventional footpegs•Reverse cut design with diamond cut raised center for increased traction•Measure 7” L x 21/2” W•May be used as passenger foot boards if custom mounted•Made in the U.S.A.

1621-0076

1621-0077

1621-0198

1621-0199

PART # DESCRIPTION SUG. RETAILFOR ALL HD MODELS WITH FOOTPEGS1621-0056 Driver floorboards $199.951621-0055 Universal/passenger floorboards 199.95

MINI BULLET FLOORBOARDS•Precision cast, premium alloy floorboards add a chrome-plated custom look to your bike

•Replace stock pegs for both passenger and rider•Standard male clevis mount

1621-0055

1621-0056

DS-720265


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1077

PART # DESCRIPTION SUG. RETAILDS-254442 Mini-floorboards, male mount $216.95DS-254423 Repl. rubber inserts (8) 16.95

MINI-FLOORBOARDS•8” L x 31/2” W x 3/8” thick billet aluminum mini-floorboards have rotating male mounts to fit almost any H-D front or rear application

•Chrome finish, rubber cushions and all hardware included


PART # DESCRIPTION SUG. RETAIL1620-0388 Mini floorboards $149.95

MINI FLOORBOARDS•Chrome finish with Rail-style raised rubber inserts•1/2” male mount•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-253586 ISO™-Wing mini boards $104.951620-0179 Repl. rubber pads (set of 8) 21.95

ISO™-WING MINI BOARDS•Greater surface area than any other pegs•Sleek lines and thin profiles permit use in a variety of applications for driver or passenger

•Available with male mounts•Measure 5” L x 5” W•Sold in pairs

PART # DESCRIPTION SUG. RETAILPRK-790 Pork chop foot pads $199.95

PORK CHOP FOOT PADS•Unique pads look and work great•6061 T-6 billet aluminum construction with faceted edges and rubber pads

•Use as peg replacements or as footrest when used with highway pegs•Design allows the pads to be angled to rider’s preference•Measure 7” L x 4 1/2” W•Made in the U.S.A.

CHROME DRIVER FLOORBOARD RELOCATION BRACKETS•Repositions the driver floorboards 1” forward and 1” further out than the stock location

•Compatible with Küryakyn ISO® Boards and H-D Traditional or Swept Wing floorboards

•Not for use with Cruise Arm Mk III or standard length Cruiser Arm Mk IV

PART # DESCRIPTION SUG. RETAIL1621-0101 Mini floorboards $56.95

MINI FLOORBOARDS•Die-cast construction with chrome-plating and non-slip rubber matting

•Replace male clevis mount footpegs; supplementary mounting holes allow floorboards to rotate 15° for the perfect riding position

•Measure 4” x 8”•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1621-0166 For 09-11 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models $77.951621-0255 For 09-11 CVO FLHT models 77.951621-0098 For 93-08 FLT, FLHR, FLHX, FLHT and FLTR models 77.95

DRIVER FLOORBOARD SPREADERS•Moves the floorboards outward 11/4”•Provide greater comfort by moving the legs away from the gas tank and engine heat•Work well with oversized primary covers•Kit is easy to install using included hardware•Billet aluminum with a black finish•Compatible with fairing lowers, but not with centerstand•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1621-0167 For 09-11 FLHT/FLHR/FLTR/FLHX/H-D FL Trikes $42.951621-0071 For 97-08 FLT/FLHT/FLHR/FLTR/FLHX 39.951621-0169 For 83-92 FLHT/FLHR 39.951621-0168 For 92-09 FLT/FLHT/FLHR/FLTR (rear passenger) 29.95

FLOORBOARD EXTENSION KIT•These spacer kits space out your floorboards an extra .8”•Provides more room away from the pipes on the right and the shifters on the left•Allows full floorboard use instead of just the outer half; increases comfort and security•Kit includes stainless steel bolts and powder-coated aluminum spacers•Made in the U.S.A.

1621-01671621-0168

DS-253586

1621-0098

DS-254442

PART # DESCRIPTION SUG. RETAIL1621-0170 For 97-11 FLHT, FLHR, FLTR, FLHX $93.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1078

DRIVER FLOORBOARD EXTENSION KITS•Moves factory floorboards forward 2”•Provides extra leg room and comfort for taller riders•Relocation brackets and all mounting hardware included

NOTE: Will not fit with fairing lowers.

PART # DESCRIPTION SUG. RETAILFOR 09-11 FLT/H-D FL TRIKE MODELS1621-0176 Black $169.951621-0175 Chrome 189.95FOR 84-08 FLT MODELS1621-0099 Black 149.951621-0100 Chrome 169.95

PART # DESCRIPTION SUG. RETAIL1904-1704 For 93-09 Dresser models; repl. OEM #52719-93 $99.95

PASSENGER FLOORBOARD MOUNTS•Chrome-plated machined steel•Replace the existing black mounts•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-530620 For 84-08 FLT, FLHT (4-pc.) $176.95

DRIVER FLOORBOARD MOUNTING BRACKETS•Chrome reproductions of the OEM mounting brackets

•Utilize OEM mounting hardware

•Floorboards are not included; must be purchased separately

PART # DESCRIPTION SUG. RETAIL1621-0240 For 10-11 FLHT, FLHR, FLHX, FLTR and H-D FL Trike

models, black finish $77.951621-0069 For 93-09 FLT, FLHT, FLHR, FLHX and FLTR models,

polished finish 77.95

PASSENGER FLOORBOARD EXTENDERS•Billet aluminum construction with a polished or black finish•Extenders move the passenger floor boards out 1”•Work great on stock motorcycles to give the passenger increased comfort; necessary when using oversized primary covers such as the Barnett billet aluminum cover


PART # DESCRIPTION SUG. RETAIL1621-0108 For 93-09 Dresser and Road King models $125.95

PASSENGER BOARD MOUNTS•Replaces the stock black mounts•Beautiful chrome-plated finish•Accept stock or most aftermarket passenger floorboards•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0107 For 93-11 FLT/FLHT $75.95

REAR FOOTPEG MOUNTS•Chrome billet footpeg mounts allow you to replace the rear floorboards on 93-11 FLT/FLHT models with any male mount standard footpegs

•Hardware included•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 84-11 FLT, FLHT, FLHTCUTG (EXCEPT FLHRS, FLHX); 86-11 FLST (EXCEPT 05-11 FLSTN, 08-11 FLSTSB, 09-11 FLSTC)1621-0078 For streamliner floorboards $74.951621-0079 For stock floorboards 74.95

UNDERCOVERS•Black, ABS plastic insert smoothes out and covers the underside of your stock or streamliner floorboards

•Add paint or leave them black•Easy installation – snap into place, held securely with 3M tape

•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-243659 For 93-11 FLT $79.95

PASSENGER FOOTPEG MOUNTING KIT•Chrome-plated billet steel mounting kit allows for the mounting of passenger footpegs in place of the OEM floorboards

•Accepts any male mount footpegs•Footpegs sold separately•Made in the U.S.A.

1621-0078

1621-0079

1621-0175

1621-0099

1621-0069


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1079


RETAIL1621-0123 For 87-11 FLT and H-D FL Trike, 86-11

FLST w/ OEM D-shaped passenger floorboards; repl. OEM #50782-91 $49.95

PASSENGER FLOORBOARD COVERS•Chrome-plated steel covers•Install using supplied chrome self-tapping screws•Smooth, clean styling•Sold in pairs

FLOORBOARD “MINI-SKIRTS”•Give the stock floorboards a custom look•Highly polished chrome-plated steel skirts cover the lower section of the floorboard

•Easy to install; mount between the rubber isolators and the upper floorboard and include instructions

•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-254444 For most rectangular floorboards from

84-11 (except 05-11 FLSTN, 08-11 FLSTSB, 09-11 FLSTC, FLHRS, FLHX) $270.95

FLOORBOARD SKINS•CNC-machined from 6061 T-6 billet aluminum•Chrome finish•Sold in pairs•Made in the U.S.A.

FOR 86-11 FLT, FLHT, FLHR, FLTR, H-D FL TRIKE, FLST; TRADITIONAL MOUNTINGPART # DESCRIPTION SUG. RETAILBLACK1621-0212 Stagger style $299.951621-0218 Maltese style 250.951621-0228 Vortex style 250.95CHROME1621-0211 Stagger style 299.951621-0217 Maltese style 250.951621-0227 Vortex style 250.95

TRAC-BOARDS FLOORBOARD INSERTS•Machined from billet aluminum then topped with stainless steel studs pressed into the base

•Satin-grained top surface in either chrome-plated or black anodized

•Provide secure no-slip foot placement•Utilize specially engineered rubber mounts to isolate vibration; rear inserts require one hole to be drilled in existing floorboard to allow for third isolator to be fastened; pattern for drilling included

•Front inserts mount directly onto traditional and swept style floorboards; rear inserts mount directly onto traditional style passenger floorboards

•Sold in pairs; matching components also available•Made in the U.S.A. with domestic materials


RETAIL1904-3002 For 80-11 FLT, FLHT and H-D FL Trike

(except FLHRS, FLHX), 86-11 FLST (except 05-11 FLSTN, 08-11 FLSTSB, 09-11 FLSTC) and 90-11 FLSTF $42.95

REARFRONT

1621-0225

1621-0224

1621-0209

1621-0212

1621-0219

1621-02151621-02071621-0214

Left

Right

PART # DESCRIPTION SUG. RETAILFOR 80-11 FLT/FLHT, FLHTCUTG, 86-11 FLST/C, 90-11 FLSTF/N WITH RECTANGLE-STYLE FLOORBOARDS1621-0234 Chrome $129.951621-0235 Black powdercoat 109.951621-0246 Repl. rubber pads (pr.) 21.95

FLOORBOARD PADS•Replace the stock rubber floorboard pads

•Machined from billet aluminum•Knurled pattern rubber inlay•Rubber isolator mounts not included; PART #DS-253006 or equivalent required to properly mount (sold separately)

•Available in chrome or black powdercoat•Include installation hardware and instructions

•Sold in pairs•Replacement rubber pad inserts available separately; include pair of pads and adhesive


1621-0234

FOR 86-11 FLT, FLHT, FLHR, FLTR, H-D FL TRIKE, FLST; TRADITIONAL MOUNTINGPART # DESCRIPTION SUG. RETAILBLACK1621-0208 Stagger style $299.951621-0214 Maltese style 299.951621-0220 U.S.A. style 299.951621-0224 Vortex style 299.95CHROME1621-0207 Stagger style 299.951621-0213 Maltese style 299.951621-0219 U.S.A. style 299.951621-0223 Vortex style 299.95

FOR 04-11 FLT, FLHT, FLHR, FLTR, H-D FL TRIKE; SWEPT MOUNTINGPART # DESCRIPTION SUG. RETAILBLACK1621-0210 Stagger style $299.951621-0216 Maltese style 299.951621-0222 U.S.A. style 299.951621-0226 Vortex style 299.95CHROME1621-0209 Stagger style 299.951621-0215 Maltese style 299.951621-0221 U.S.A. style 299.951621-0225 Vortex style 299.95

1621-0235


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1080

DRIVER FLOORBOARD GUARDS•Prevent your boot heels from melting on the hot exhaust pipe

•Highly-polished stainless-steel guards will also dress up your stock floorboards

•Allow you to keep your eyes safely on the road ahead instead of looking down to see if your heel is too close to the exhaust pipe

•Full-right/modified left set comes with a left-side guard height that has been modified by 1/4” to not impede heel shifter

DRIVER AND PASSENGER FLOORBOARD COVERS•Sit on top of the stock steel base plate to provide maximum comfort

•Raised rubber edges keep your boots off the exhaust pipes

•Choice of chrome flame inserts or Zombie chrome inlay designs

•Direct replacement for OEM floorboard covers

•Sold in pairs


RETAILFOR 84-11 HD MODELS WITH FLOORBOARDS (EXCEPT FLHRS, FLHX, 05-11 FLSTN, 08-11 FLSTSB, 09-11 FLSTC)1621-0053 Full-size right guard/full-size left guard set $96.951621-0054 Full-size right guard/modified-size

left guard set 96.951621-0052 Single right-side only guard 53.95

PART # DESCRIPTION SUG. RETAILFOR 86-09 DRESSERS (EXCEPT FLHRS, FLHX)1621-0057 Combination heel and interior guard set $75.951621-0059 Interior edge guard set only 65.95FOR 86-11 SOFTAIL MODELS (EXCEPT 05-11 FLSTN, 08-11 FLSTB, 09-11 FLSTC)1621-0058 Combination heel and interior guard set 75.951621-0060 Interior edge guard set only 65.95

PASSENGER FLOORBOARD GUARDS•Prevent boot heels from touching the hot exhaust pipe

•Highly-polished stainless-steel guards will also dress up your stock floorboards

FLOORBOARD ISOLATION DAMPERS•Sold in 8-pack

PART # DESCRIPTION SUG. RETAIL1624-0227 For 00-10 FLST,

FXST, FXCW/C $169.951624-0183 For 91-10 FXD, FXDWG 169.95

ADJUSTABLE CHROME MUSTACHE BAR•A classic design gets a modern update

•Clamp system allows the bar to slide up or down on frame downtubes, and peg mounts can rotate fore or aft for the ultimate in adjustment and rider comfort

•Accept any male-mount style H-D pegs

PART # DESCRIPTION SUG. RETAIL1624-0185 L84-03 XL $155.951624-0184 04-11 XL 155.95

ADJUSTABLE CHROME CRUISE PEG MOUNT•Bolt to the welded crossbrace near the bottom of the downtubes•Fully adjustable•Can be used with or without forward controls•Accept any male mount style H-D footpegs (sold separately)•1” diameter bar


RETAIL1624-0124 For 04-11 XL $159.95

ADJUSTABLE HIGHWAY PEG MOUNT•Features black-finished mountingbrackets and chrome footpeg arms and clevices

•Footpeg mount arms are adjustable and can be mounted in three pre-set positions to match the rider height and preferred riding position

•Footpegs not included; accepts most male mount pegs•Includes all required mounting hardware; visible hardware is chrome-plated

PART # DESCRIPTION SUG. RETAILDS-253006 For 84-91 FL, FLT and FLST;

repl. OEM #50620-74 $5.95

PART # DESCRIPTION SUG. RETAILDRIVER FLOORBOARD COVERS FOR 84-11 FLT, FLHT AND H-D FL TRIKE (EXCEPT 04-05 FLHTCSE, 06-11 FLHTCUSE), 98-11 FLTR (EXCEPT 09-11 FLTRSE), 94-11 FLHR (EXCEPT 04-07 FLHRS, 07-08 FLHRSE) AND ALL 86-11 FLST (EXCEPT 05-11 FLSTN, 05-06 FLSTFSE, 08-11 FLSTSB, 09-11 FLSTC)1620-0683 Flame $169.951621-0121 Zombie 169.95

PART # DESCRIPTION SUG. RETAILPASSENGER FLOORBOARD COVERS FOR 86-11 FLHT, FLHR, FLTR, FLHX AND H-D FL TRIKE, 86-11 FXST/FLST W/ H-D ACCESSORY FLOORBOARD KITS AND TRADITIONAL-SHAPE FLOORBOARDS1621-0206 Flame $69.951621-0122 Zombie 69.95

1621-0121

1621-0122

1621-0053

1621-0054

1621-0052

1621-0052

1621-0057

1621-0058

1621-0060

1624-0184

1624-0183

1621-02061620-0683


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1081

MOTOR MOUNT HIGHWAY BARS•Drag’s assortment of chrome-plated highway bars are engineered for comfortable highway cruising and good looks

•Come complete with 1/4” steel mounting plates (where required); refer to footpeg pages for styles

NOTE: Footpegs are sold separately to ease dealer inventory and let buyer customize his purchase.

NOTE: The kit for 86-03 XL comes without mounting plates. Use PART #DS-243516.PART # APPLICATION BAR LENGTH STYLE SUG. RETAILDS-243524 For 91-11 Dyna Glide 33/8” Female mount $59.95DS-243625 For 86-03 XL 61/4” Female mount 39.95

DS-243524

DS-243625

“RAIL” FOOT AND SHIFTER PEGS•Another unique design from Drag and Arlen Ness

•Protective rubber rails run completely around diameter for great looks no matter how pegs rotate or pivot

•Each is precisely die-cast, chrome-plated aluminum•End cap is super-clean and uses a grade 8 countersunk flat-head socket screw

•Very tight tolerances ensure a great-quality, superstrong footpeg assembly

•Carbon-steel pivot ends are stronger than other die-cast pivots•Peg diameter is 1.5” (between a standard large-size driver and the smaller passenger-style pegs); length is 4” without pivot end

•Shifter peg matches footpegs•Sold in pairs with pivot ends installedPART # DESCRIPTION SUG. RETAILDS-253699 “Rail” pegs w/ female mount $58.95DS-253696 “Rail” pegs w/ male mount 53.95DS-253698 “Rail” shifter peg (ea.) 16.95DS-253700 Small dia. (11/4”) “Rail” footpegs (pr.) w/ 1/2 male mount 45.95

DS-253696DS-253696

DS-253698

THREE-BAND FOOTPEGS AND SHIFT PEGS•Chrome plated die-cast construction

•Feature soft rubber bands set into the pegs to reduce vibration

•Matching grips (PART #s0630-0596/-0597) available separately, see HANDLEBARS, CONTROLS & MIRRORS section

•Footpegs sold in pairs, shift peg is sold each

PART # DESCRIPTION SUG. RETAIL1603-0119 Male-mount three-band footpegs $79.951620-0750 Three-band shift peg 29.951603-0132 Repl. rubber bands for 1620-0750 (3-pk.) 4.950630-0597 Repl. rubber bands for 1603-0119 (6-pk.) 9.95

“BIG BUFFALO” FOOTPEGS•Machined from billet aluminum

•Vibration-absorbing rubber inserts for comfort on long rides

•Chrome or gloss black finish available•Male-mount design•A perfect match to our Big Buffalo grips•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1620-0674 Chrome $139.951620-0675 Black 119.95

1620-0674

SKULL FOOTPEGS•Billet construction with a chrome-plated finish•Rubber skull inserts•Male-mount design•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0466 Skull footpegs $89.95

PART # DESCRIPTION SUG. RETAIL1620-0377 Chrome footpegs (pr.) $59.951620-0789 Black footpegs (pr.) 59.951603-0053 Chrome shift peg (ea.) 24.951603-0133 Black shift peg (ea.) 24.95

FOOTPEGS AND SHIFT PEGS•Features polished and chrome-plated or black finish die-cast construction

•Knurled nylon insets for style and durability for all-day riding•These unique male mount footpegs and shift pegs are only available from Drag Specialties

1620-0377

1620-0789

1603-0053

1603-0133

PART # DESCRIPTION SUG. RETAILMALE-MOUNT FOOTPEGS1603-0120 Straight cut, chrome $99.951603-0121 Straight cut, black 99.951603-0122 Classic cut, chrome 99.951603-0123 Classic cut, black 99.95SHIFT PEGS1620-0746 Straight cut, chrome 39.951620-0747 Straight cut, black/re-machined 39.951620-0748 Classic cut, chrome 39.951620-0749 Classic cut, black 39.95REPLACEMENT RUBBER INSERT KITS0630-0791 For Straight cut footpegs 24.950630-0792 For Classic cut footpegs 9.950630-0793 For Straight cut shifter pegs 10.950630-0794 For Classic design shifter pegs 6.95

CUSTOM FOOTPEGS AND SHIFT PEGS•Billet aluminum construction•Straight design footpegs feature four smooth rubber inserts•Classic design footpegs feature a textured rubber sleeve cover•Available in a chrome or black/natural finish•Footpegs sold in pairs, shift pegs sold each

1603-0120

1603-0123

1620-0747

1620-0748

1603-0119

1620-0750


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1082


RETAILDS-253500 Soft-ride large dia. peg w/ male mount (pr.) $39.95DS-253501 Soft-ride large dia. footpeg w/ large female mount (pr.) 39.95DS-253506 Soft-ride small dia. peg w/ 5/8” female mount (pr.) 35.95DS-253505 Soft-ride small dia. peg w/ male mount (pr.) 35.95DS-253510 Soft-ride shifter peg (ea.) 11.95DS-253743 Extended Soft-ride 31/4” shifter peg (ea.) 11.95


RETAILDS-253503 Soft-ride male mounts (pr.) $9.95DS-253507 Soft-ride small 5/8” female mount (pr.) 9.95DS-253515 Soft-ride repl. rubber, large peg (8-pk.) 7.95DS-253516 Soft-ride repl. rubber, small peg (8-pk.) 7.95DS-253517 Soft-ride repl. shifter peg rubber (set) 2.95

SOFT-RIDE FOOTPEGS AND SHIFTER PEGS•Designed to absorb vibrations•Hollow core, long-lasting neoprene rubber insert cleats are isolastically mounted on a special chrome socket-head bolt

•Shifter peg and all replacement components are also available

DS-253500

DS-253501 DS-253506 DS-253505 DS-253510 DS-253743

DS-253503 DS-2535007DS-253515 DS-253517

PART # DESCRIPTION SUG. RETAILDS-253330 5/8” female mount footpegs $30.95DS-253340 Small male mount footpegs 30.95DS-253342 5” male mount footpegs 39.95

PART # DESCRIPTION SUG. RETAILDS-253410 Large male mount footpegs $39.95DS-253400 Large female mount footpegs 37.95DS-241010 Shifter peg 8.95

SUNDANCE® FOOTPEGS•Highly chromed custom footpegs have neoprene O-rings and are used for many applications

•Matching shift peg also available, sold separately

DS-253330

DS-253340

DS-253342

DS-253410

DS-253400

DS-241010

PART # DESCRIPTION SUG. RETAILDS-241015 3/4” O-rings for kick pedals and shift pegs (12-pk.) $.95 (ea.)DS-253017 7/8” O-rings for highway and passenger pegs (10-pk.) .95 (ea.)DS-253019 1” O-rings for large driver pegs and flat kick pedal (10-pk.) .95 (ea.)

NEOPRENE O-RINGS FOR SUNDANCE® PEGS•Replacements for original Sundance neoprene O-rings

DS-253017

PART # DESCRIPTION SUG. RETAILFOOTPEGS1620-0753 Twin slash, chrome $99.951620-0755 Venturi, chrome 99.951620-0757 5-Spoke, chrome 99.951620-0754 Twin slash, black 99.951620-0756 Venturi, black 99.95

PART # DESCRIPTION SUG. RETAILFOOTPEGS (CONT)1620-0758 5-Spoke, black $99.95SHIFT PEGS1603-0126 Twin slash, chrome 29.951603-0128 Venturi, chrome 29.951603-0130 5-Spoke, chrome 29.95

PART # DESCRIPTION SUG. RETAILSHIFT PEGS (CONT)1603-0127 Twin slash, black $29.951603-0129 Venturi, black 29.951603-0131 5-Spoke, black 29.95

BILLET MALE-MOUNT FOOTPEGS AND SHIFTER PEGS•All pegs have knurled rubber sleeves•Pegs are available with a chrome or black/re-machined finish•Twin Slash, Venturi or 5-Spoke designs available•Matching grips available separately; see the Handlebars and Controls section•Footpegs sold in pairs; shift pegs sold each

1620-07531620-07561620-0757

1603-0127

1603-0128 1603-0130


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1083

RUBBER VIBRATION-ABSORBING PASSENGER FOOTPEGS•OEM-style passenger footpegs available in standard or extended (5”) length

•All have small male mounts and are finished with chrome end caps

•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-253408 Standard $22.95

PART # DESCRIPTION SUG. RETAILDS-253403 Extended length $27.95

DS-253408 DS-253403

PART # DESCRIPTION SUG. RETAILDS-253320 Sundance stud

mount footpegs $27.95

STUD MOUNT FOOTPEGS•A chromed 3/4” square steel block with 3/8”-24 thread is included for custom frame tab mounting

•Also screw onto the lower shock mounts of pre-72 Harley models

CHROME FOOTPEGS WITH RUBBER SLEEVES•Die-cast construction, rubber sleeves and highly polished chrome ends

•Feature the styling of our Sundance® pegs, but with molded rubber sleeves rather than O-ring grooves

•Sold in pairs unless noted


RETAILDS-253404 4” rubber footpegs w/ large

female mounts $37.95DS-253405 Rubber footpegs w/ small

female mounts 26.95


RETAILDS-253406 Rubber footpegs w/

male mounts $26.95DS-253407 Rubber shift peg (ea.) 8.95

DS-253404 DS-253405 DS-253406

DS-253407

PART # DESCRIPTION SUG. RETAILDS-253300 Sundance clamp-

mount footpegs $27.95

CLAMP MOUNT FOOTPEGS•Includes chromed 1” and 11/4” steel clamps; designed for clamping pegs to frames or safety bars


RETAILDS-253800 Flat footpegs $54.95DS-253019 Repl. O-rings, 1” x 3/32” (10-pk.) 1.95

“POPSICLE” FOOTPEGS WITH O-RINGS•Die-cast, diamond-shaped and highlighted by a black paint outline

•Mount to any 1” dia. engine guard or frame and comes complete with a three-piece tube clamp for easy mounting

•Unique design won’t pinch the ankle like a round peg can

•Sold in pairs; O-rings included

DS-253800

PART # DESCRIPTION SUG. RETAIL1904-6453 Straight male mount $29.951904-6454 45° male mount 29.951904-6452 Bolt-on (5/16” mount bolts) 19.951904-1764 U-clamp (fits 1”-11/4” tube) 19.95

FOOTPEGS WITH RUBBER INLAY•Fold-up design with a chrome finish•Available in male-mount, bolt-on and U-clamp style•Sold in pairs

1904-6453

1904-6454

1904-64521904-1764


RETAILDS-241065 Rubber driver pegs;

repl. OEM #50939-52 (pr.) $19.95DS-241060 Repl. rubber footrest cover for 85 FX

(not FXWG, FXST, FXR); 86-90 XL; repl. OEM #50940-52 (ea.) 5.95

DS-241050 Rubber shifter peg; repl. OEM #34611-65 (ea.) 3.95

DS-241061 Repl. driver footrest cover for 84-94 FXR; repl. OEM #50646-82 (ea.) 6.95

RUBBER REPLACEMENT DRIVER FOOTPEGS AND SHIFTER PEG•Rubber driver pegs with zinc-plated steel inserts

DS-241065

DS-241050

DS-241061

PART # DESCRIPTION SUG. RETAILDESIGNER FOOTPEGSDS-253546 Rail $53.95DS-253547 Flamed 53.95

PART # DESCRIPTION SUG. RETAILFOOTPEG MOUNTSDS-253541 Male mount $24.95DS-253543 Small

female mount 27.95

CHROME ADJUSTABLE DESIGNER FOOTPEGS•Choose from two styles of heavy steel footpegs•Durable rubber pad inserts in several designs•Footpegs feature 180° internal splines allowing pegs to be mounted at many different angles

•Footpeg mounts have four engagement locking teeth to hold pegs in place•Footpegs and mounts are sold separately (in pairs)

NOTE: Use of a thread-locking product is recommended on all mounting bolts.

DS-253541

DS-253546

DS-253543

DS-253547


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1084

PART # DESCRIPTION SUG. RETAILFOR 86-09 FLST (EXCEPT 05-09 FLSTN AND 05 FLSTFSE) AND 84-09 FLHT/FLHR MODELS W/O FAIRING LOWERS (EXCEPT 04-05 FLHTCSEI AND 04-06 FLHRS)1620-0181 Cruise Arm Mark III $169.95

CRUISE ARM MARK III•One of Küryakyn’s most popular accessories

•Offers a wide range of adjustment for comfort on the road

•Adjustment range is limited when engine guards are installed•Entire assembly mounts to the floorboard; reinforcing plate adds stiffness to the floorboards to keep flex to a minimum

•Installation requires drilling mounting holes in the steel floorboard base for the adjustable mount and floorboard reinforcing plate – stock rubber floorboard pads are not affected

•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0180 Stiletto pegs, male mount (pr.) $104.951603-0010 Shift peg (ea.) 29.951610-0020 Brake pedal pad for FXST, FXDWG and

Küryakyn forward controls 32.95

STILETTO PEGS•For those who ride on the wild side•Install on any model using male-mount pegs

PART # DESCRIPTION SUG. RETAIL1622-0147 Highway pegs for forward control models $159.95

HIGHWAY PEGS FOR FORWARD CONTROL MODELS•Arms are adjustable so you can fine-tune the footpeg location

•Chrome-plated finish•Accept any H-D male-mount style footpegs in the highway peg position

•Compatible with stock forward controls

•Recommended for use by riders with inseam of 34” or longer

•Require the use of Küryakyn footpegs

PART # DESCRIPTION SUG. RETAIL1620-0369 ISO®-SweptWing pegs w/ male-mount ends (pr.) $79.95

ISO®-SWEPTWING PEGS•Simple, stylish design adds a sleek, streamlined look to your bike

•Feature the traditional ISO® design to reduce vibration and provide long-distance comfort

•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0424 Stiletto stirrups w/ pegs (pr.) $177.95

STILETTO STIRRUPS•Combines the flair of our Stiletto pegs with a comfortable stirrup heel rest

•Built-in heel guard keeps boot heels from scuffing the bike

•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0437 Switchblade pegs (pr.) $136.95

SWITCHBLADE™ FOOTPEGS•Comfortable, versatile and sleek•Large-surface-area, rubber-isolated footpeg•Concealed heelrest can be deployed to add the comfort of Küryakyn ISO™-Stirrups

•Best for use on bikes with forward controls or forward-mounted footpegs; will work in any peg location

•Heel rests have curb feeler tabs to protect the pegs when cornering•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0367 Kaiser pegs w/ male-mount ends $104.95

KAISER™ PEGS•The ultimate chopper footpeg•Maltese Cross insert with spire pointed end for that old-school custom look

•Rubber pad inserts add comfort and isolate the foot from vibration

•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-253582 Pilot pegs (pr.) $73.95DS-253584 Pilot pegs w/ stirrups (pr.) 136.95DS-253583 Pilot shift peg (ea.) 20.95DS-253585 Pilot brake pedal pad for FXST,

FXDWG or Küryakyn forward controls 32.95

PILOT™ PEGS•Flowing teardrop male mount pegs add a unique custom look to any bike

•Available with and without stirrups

•Stirrup style has a guard to prevent your heel from melting on the front exhaust pipe

1620-0181

1620-0181

1603-0010

1620-0180

1610-0020

1620-0180

1603-0010

1610-0020

Shown with heel rest deployed

Shown with heel rest closed

DS-253583DS-253585

DS-253582

DS-253584


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1085

WIDOW PEGS•Full custom footpeg design

•Ominous black widow design nestled in the rubber pads

PART # DESCRIPTION SUG. RETAIL1611-0015 Widow pegs w/ male-mount ends (pr.) $104.951611-0016 Widow pegs w/o male-mount ends (pr.) 94.951620-0668 Widow Stirrups w/o pegs, male-mount (pr.) 104.951603-0073 Widow shift peg (ea.) 26.95

1611-0015

1620-0365

1611-0016

1603-0101

1620-0668 1603-0073

PART # DESCRIPTION SUG. RETAIL1620-0365 Footpegs w/ male-mount ends (pr.) $104.951603-0101 Shift peg w/ mounting hardware (ea.) 25.95

PART # DESCRIPTION SUG. RETAIL1620-0277 Footpegs w/ male-mount ends (pr.) $104.951603-0100 Shift peg (ea.) 25.95

FLAMIN’ PEGS•Flame design adds timeless style•Chrome bodies with rubber flame inserts provide comfort and help isolate the foot from vibrations

SWINGWING PEGS•A convenient alternative to forward controls•Our clever cruise peg features a fold-forward design

•Secondary fold-out peg extends 3” forward and locks into place for added legroom and comfort

•Sold in pairs

RETRO™ PEGS•Combine the classic comfort of ISO™-Pegs with updated styling

•The body of the peg has a thin profile that looks great on any machine

•Most of the interchangeable mounts for the ISO™-Pegs will work for the Retro™ Pegs

PART # DESCRIPTION SUG. RETAIL1611-0014 SwingWing pegs (pr.) $169.95


RETAILDS-253578 Retro pegs w/ male mount (pr.) $73.95DS-253581 Retro pegs w/ ISO™-stirrup (pr.) 104.95DS-253579 Retro brake pedal pad for FXST, FXDWG or Küryakyn forward controls (ea.) 32.95DS-253580 Retro shift peg (ea.) 20.951620-0422 Repl. pads for Retro pegs (4-pc.) 15.951603-0072 Repl. pads for Retro shift peg (2-pc.) 8.951611-0022 Repl. pads for Retro brake pedal pad (2-pc.) 11.95


RETAILSMALL ISO™-PEGSDS-241101 Male mount (pr.) $47.95DS-241102 5/8” female mount (pr.) 47.95LARGE ISO™-PEGSDS-241103 Male mount (pr.) 48.95DS-241104 3/4” female mount (pr.) 47.95LONGHORN ISO™-PEGSDS-241107 Male mount (pr.) 52.95


RETAILDUALLY ISO™-PEGSDS-253595 Male mount $73.95SHIFT PEGSDS-241105 Std. shift peg (25/8” L) 17.95DS-241106 Longhorn shift peg (31/4”) 18.95REPLACEMENT COMPONENTSDS-241114 Small peg rubbers (8-pk.) 12.95DS-241115 Large peg rubbers (8-pk.) 13.95


RETAILREPLACEMENT COMPONENTS (CONT)DS-241116 Shift peg rubbers (4-pk.) $7.951621-0027 Male peg mount (pr.) 19.951620-0426 Female mounts for

“bullet” mounts (pr.) 11.951620-0427 Female mounts for

5/8” square mount (pr.) 11.95

ISO™-PEGS AND SHIFT PEGS•Give you a custom look and dampen vibration

•Interchangeable ends allow use on early- or late-style footpeg mounts

•Hollow-core neoprene inserts are long lasting

•Small peg measures 11/4” in diameter x 45/8” long•Large peg measures 11/2” in diameter x 47/8” long•Longhorn peg measures 11/4” in diameter x 53/4” long•Dually peg measures 21/2” wide x 5” long•Matching pegs, brake pedal pads and stirrups are available separately

NOTE: ISO™-Pegs components are not compatible with other footpegs such as the Soft-Ride style.

ZOMBIE™ PEGS•Feature a sinister chrome spire point and a skull nestled between the rubber pads

•Chrome bodies with rubber pads

•Sturdy, rugged pegs design•Footpegs include male-mount ends•Shift peg includes mounting hardware

1620-0277 1603-0100

1620-0426

1620-0427

DS-253578

DS-253579

DS-253581

DS-253580

DS-241101

DS-241102

DS-241103

DS-241104

DS-253595DS-241105

DS-241106

1621-0027

Secondary peg extended


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1086

PART # DESCRIPTION SUG. RETAILDS-241108 W/o peg, male mount (pr.) $99.951620-0128 W/ Dually pegs, male mount (pr.) 139.95DS-241109 W/ large peg, male mount (pr.) 129.95DS-241110 W/ small peg, male mount (pr.) 129.95DS-241114 Repl. small peg rubbers (8-pk.) 12.95

PART # DESCRIPTION SUG. RETAILDS-241115 Repl. large peg rubbers (8-pk.) $13.95DS-241121 Repl. stirrup pads (pr.) 11.95DS-241123 Repl. stirrup arm and pad (ea.) 26.95DS-241124 Repl. stirrup end, male mount (ea.) 23.95

ISO™-STIRRUPS•Add a heel rest to the popular ISO™-Peg system•Give you floorboard comfort without the bulk•Available with two styles of footpegs, or without footpegs to upgrade your existing ISO™-Peg system•Replacement components also available

PART # DESCRIPTION SUG. RETAIL1620-0188 For use with H-D Aileron (OEM #s 50305-02, 50916-90T or 50915-90T)

or Airfoil (OEM #s 50134-95, 50133-95, 50474-03, 43280-01, 50131-95 or 50130-95) accessory footpegs $104.95

1620-0189 For use with H-D Flame, Diamond or Skull accessory footpegs (OEM #s 50312-03, 50506-04 or 50370-04) 104.95

ISO™-STIRRUPS•Now you can add the comfort of ISO™-Stirrups to your H-D or other style custom footpegs•Simply remove the standard mount and replace it with this stirrup assembly•For use with male-mount style footpegs•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-253587 Adjustable passenger pegs for 93-06 FLT $199.951621-0075 Extended left side passenger board mount 73.951620-0681 For 04-06 FLHTCSE, FLHTCUSE and any other Touring model equipped w/ H-D chrome passenger floorboard kit OEM NO.

52714-04, 50378-07 199.951620-0682 For 07-09 FLHT/FLHR/FLTR/FLHX equipped w/ stock passenger boards (except 07-09 FLHTCUSE) 199.951620-0799 For 07-09 FLHTCUSE or other Touring models w/ H-D passenger floorboard mount kit #50768-07 199.95

ADJUSTABLE PASSENGER PEGS FOR FLT•Bolt action locking device on the swingarm adds two intermediate positions

•Revised mounting system allows easier installation and better fit on newer models

•Do not interfere with floorboard operation

•93-06 FLT models equipped with Rinehart True Dual Exhaust require PART #1621-0075 (sold separately), extended left-side passenger board mount

ADJUSTABLE PASSENGER PEGS•Provide five locking positions for alternative footrest placement

•Easy one-bolt installation•Include small ISO™-Pegs on retractable arms•Footpegs for female mounts must be purchased separately

•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0001 For 86-07 FXST, FLST models

(except FXSTD, FLSTF FLSTN and FLSTS w/ OEM exhaust or cross-over exhaust systems) $198.95

DS-241108 1620-0128

1620-0188

DS-241123

DS-241124

DS-253587

1620-0682


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1087

PART # DESCRIPTION SUG. RETAILFOR 86-05 FXST, 86-07 FLST (EXCEPT FXSTD, FLSTFSE AND 07 FLSTF)1620-0185 Mounts w/ small ISO™-Pegs $124.951620-0186 Mounts w/o pegs 94.951620-0800 Repl. mount clevis w/ hardware (ea.) 21.95

UNDERSEAT PEGS•Give passengers the chopper-style riding position right out of the 60s

•Work great for smaller passengers•Sold in pairs

LONGHORN OFFSET DUALLY HIGHWAY PEGS•Combine our most popular highway peg components into one easy-to-install product

•Provide long-haul comfort•Available with 1” or 11/4” quick clamps; install on engine guards

•Fully adjustable

PART # DESCRIPTION SUG. RETAIL1624-0035 Longhorn offset dually ISO™-Pegs

w/ 11/4” clamp (pr.) $159.951624-0036 Longhorn offset dually ISO™-Pegs

w/ 1” clamp (pr.) 156.95

PART # DESCRIPTION SUG. RETAIL1624-0229 Longhorn offset peg mounts $114.95

LONGHORN OFFSET FOOTPEG MOUNTS•Measure 21/2” wide and 31/2” long•Curved shape keeps the peg tucked in tight to the motorcycle

•Peg mount has 360° of adjustability to provide a full 61/2” range of adjustment to the footpeg position

•Incorporate a locking device so the mount will not rotate out of position

•Accept most male-mount style footpegs (sold separately)•Include 11/4” Magnum clamps for easy installation•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0433 For 04-07 Big Dog $32.95

FOOTPEG ADAPTERS FOR BIG DOG•For use with most Küryakyn footpegs•Sold in pairs

PART # DESCRIPTION SUG. RETAILOFFSET MOUNTS WITH QUICK CLAMPS1620-0129 Small ISO™-Pegs $124.951620-0130 Large ISO™-Pegs 136.951620-0131 Dually ISO™-Pegs 146.95CLEVIS MOUNT WITH QUICK CLAMPS1620-0132 Small ISO™-Pegs 99.951620-0133 Large ISO™-Pegs 104.951620-0134 Dually ISO™-Pegs 136.951620-0135 ISO™-Wings 146.95ISO-STIRRUPS WITH MAGNUM QUICK CLAMPS1620-0136 Small ISO™-Pegs with ISO™ Stirrups 167.951620-0137 Large ISO™-Pegs with ISO™ Stirrups 167.95

TOUR-TECH™ CRUISE MOUNTS•These pegs offer an incredible amount of adjustability•Entire assembly can be moved up or down on the engine guard•Arm of the footpeg can be further adjusted along a vertical or horizontal arc

•Unique clevis permits angle adjustment of the footpeg•Recommended for use on Touring models, FLSTC model or any bike that has 11/4” dia. engine guards

•Work great with fairing lowers•All feature the 11/4” Magnum Quick Clamp for quick, easy installation•Sold in pairs

1620-0185

1620-0186

1624-0036

1624-0035

1620-0129

1620-0133

1620-0134

1620-0132

1620-0135

1620-0136

1620-0137

1620-0130

1620-0131


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1088


RETAILFEMALE-MOUNT PEGS1620-0400 1.25” full rubber; chrome $145.951620-0402 1.25” full rubber; black 145.95MALE-MOUNT PEGS1620-0727 1” Factor, polished 134.951620-0728 1” Factor, chrome 145.951620-0729 1” Factor, black 145.951620-0730 1.25” Factor, polished 134.951620-0731 1.25” Factor, chrome 145.951620-0732 1.25” Factor, black 145.95DS-243512 1” wide band; chrome 145.951620-0395 1” wide band; black 145.95DS-243572 1” full rubber; chrome 145.951620-0399 1” full rubber; black 145.95DS-243571 1” dovetail; chrome 145.951620-0397 1” dovetail; black 145.95


RETAILMALE-MOUNT PEGS (CONT)DS-253020 1.25” wide band; chrome $145.951620-0396 1.25” wide band; black 145.95DS-253022 1.25” dovetail; chrome 145.951620-0398 1.25” dovetail; black 145.953/8”-16 THREADED SPRING-LOADED FOLDING MALE-MOUNT PEGSDS-253026 1” wide band; chrome 155.951620-0391 1” wide band; black 155.951/2”-20 THREADED SPRING-LOADED FOLDING MALE-MOUNT PEGSDS-253065 1” wide band; chrome 155.951620-0392 1” wide band; black 155.95DS-253067 1” full rubber; chrome 155.951620-0394 1” full rubber; black 155.95DS-253068 1”dovetail; chrome 155.95


RETAIL1/2”-20 THREADED SPRING-LOADED FOLDING MALE-MOUNT PEGS (CONT)1620-0393 1” dovetail; black $155.95SHIFTER PEGSDS-253032 Wide band; chrome 51.951603-0058 Wide band; black 51.95DS-253033 Full rubber; chrome 51.951603-0060 Full rubber; black 51.95DS-253034 Dovetail; chrome 57.951603-0059 Dovetail; black 57.951603-0106 Factor; polished 47.951603-0107 Factor; chrome 51.951603-0108 Factor; black 51.95

FOOTPEGS AND SHIFTER PEGS•Available in trac, factor, wide band, full rubber or dovetail styles•Footpegs sold in pairs; shifter pegs are sold each•Available with polished, chrome or black-anodized finish•Made in the U.S.A. with domestic materials

DESCRIPTION WIDE BAND SUG. RETAIL FULL RUBBER SUG. RETAIL DOVETAIL SUG. RETAIL1” pegs DS-243518 $18.95 DS-253057 $15.95 1603-0056 $24.9511/4” pegs DS-243514 18.95 1603-0057 15.95 DS-253061 24.95Shifter pegs DS-243517 8.95 DS-253059 7.95 DS-253062 11.95

REPLACEMENT RUBBER COMPONENTS FOR JAYBRAKE FOOTPEGS/SHIFTER PEGS•Replacement peg rubbers are sold for two pegs; replacement shifter rubbers are for one peg

PART # DESCRIPTION SUG. RETAILFOOTPEGS1620-0733 Chrome $199.951620-0734 Black 199.95

PART # DESCRIPTION SUG. RETAILMALE FOOTPEG MOUNTS (PR.)1620-0735 Stainless $70.95

PART # DESCRIPTION SUG. RETAILSHIFT PEGS1603-0109 Chrome $70.951603-0110 Black 70.95

TRAC SERIES PASSENGER FOOTPEGS AND SHIFT PEGS•Machined from billet aluminum then topped with stainless steel studs pressed into base

•Top surface is satin grained•Secure no-slip foot placement in all weather conditions•Footpegs mount using FLHX/FLTRX OEM taper-style peg mounts or Jaybrake peg mounts PART #1620-0735, sold separately

•Footpegs sold in pairs; matching shift pegs also available separately (sold each)

•Made in the U.S.A. with domestic materials

1603-0060

1603-0059

1620-0727

1620-07291620-0728

DS-243512

1620-0395

DS-243572

1620-0399

1620-0391

DS-253068

DS-253034

DS-253032

DS-253033

1603-0108

1620-0396

1603-0058

1603-01071603-0106

DS-243571

1603-0056

DS-243518

DS-243517

1603-0057

1620-0733

1620-0734

1603-0109

1620-0735


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1089

PART # DESCRIPTION SUG. RETAILFOOTPEGS W/ 45° MALE MOUNTS1620-0726 Chrome $109.951620-0725 Black anodized 99.95

PART # DESCRIPTION SUG. RETAILFOOTPEGS W/ STRAIGHT MALE MOUNTS1620-0519 Chrome $109.951620-0520 Black anodized 99.95

PART # DESCRIPTION SUG. RETAILHARDWARE2404-0367 Kit $14.95

MOTO FOOTPEGS•Machined from billet aluminum•Footpegs are available in 45° male-mount design or straight male-mount design•Hardware (PART #2404-0367) sold separately•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1624-0155 Black anodized clamp-on O-rings footpegs $189.951624-0156 Black anodized clamp-on wide band footpegs 189.951624-0157 Black anodized clamp-on ribbed footpegs 189.951624-0037 Chrome clamp-on O-rings footpegs 189.951624-0038 Chrome clamp-on wide band footpegs 189.95

PART # DESCRIPTION SUG. RETAIL1624-0039 Chrome clamp-on ribbed footpegs $189.951620-0236 Repl. O-rings (16-pk.) 7.951620-0237 Repl. flat bands (6-pk.) 14.951620-0238 Repl. ribs (16-pk.) 20.95

CLAMP-ON FOOTPEGS•High-quality billet aluminum clamp-on footpegs will fit any highway bar or frame with 11/4” o.d. tubing

•Footpegs sold in pairs•Replacement rubber ribs, flat bands and O-rings sold separately;sold in quantities for one set of pegs, unless noted


RETAILADJUSTABLE LONG FOOTPEGS; 41/2” LONG X 21/2” WIDE X 1” THICK1620-0706 Black anodized $159.951620-0707 Clear anodized 159.95STANDARD LONG FOOTPEGS; 39/16” LONG X 21/2” WIDE X 1” THICK1620-0469 Black anodized 119.951620-0470 Clear anodized 119.95


RETAILADJUSTABLE SHORT FOOTPEGS; 35/16” LONG X 21/2” WIDE X 1” THICK1620-0708 Black anodized $149.951620-0709 Clear anodized 149.95STANDARD SHORT FOOTPEGS; 35/16” LONG X 21/2” WIDE X 1” THICK1620-0467 Black anodized 119.951620-0468 Clear anodized 119.95


RETAILSHORT-PROFILE SHIFTER PEGS; 21/8” LONG1603-0103 Clear anodized $34.951603-0104 Black anodized 34.95STANDARD SHIFTER PEGS; 25/8” L1603-0085 Black anodized 34.951603-0086 Clear anodized 34.95

STANDARD AND ADJUSTABLE SERRATED BILLET FOOTPEGS AND SHIFTER PEGS•Give your bike a unique design twist with these all-billet aluminum serrated footpegs

•Fully CNC-machined from solid 6061 T-6 bar•Superstrong, yet lightweight two-piece construction•The comfortable serrated foot surface area gives you a wider area for your feet and provides a good “bite” onto the bottom of your shoe

•Footpegs available with Joker’s exclusive pitch adjustment screw that enables you to adjust the pegs to a “level” riding position (if necessary) so the pegs don’t appear to “lay down” with time, vibration, etc.

•Adjustable pegs feature full 360° footpeg rotation making them perfect for any application•Shift pegs have serrations on the top surface only, and the bottom side is smooth to provide non-shoe damaging up-shifts – installs easily to most stock H-D shift arms with a threaded 5/16”-24 mounting hole

•Available in your choice of natural clear anodized or our hard black anodized finish•Male-mount footpegs are available in two different lengths and fit most models with standard Harley female footpeg mounts

•Footpegs sold in pairs; shifter pegs sold each•Made in the U.S.A.

1620-07091620-0706

1620-0708

1603-01041603-0103

1603-0086

1603-0085

1620-0726

1620-0725

1620-0519

1620-0520

1620-0520

2404-0367

1624-0155

1624-0156

1624-01571624-0037

1624-0038

1624-0039


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1090

PART # DESCRIPTION SUG. RETAIL1620-0177 Footpegs $131.951603-0008 Shifter peg 34.95

CHROME ROUND-STYLE FOOTPEGS AND SHIFTER PEG•Footpegs feature a two-piece billet assembly that allows the body to be rotated to fit the rider’s personal preference

•Undercut foot area•Fit standard male mounts•All parts are fully CNC-machined from billet stock•Ball-milled styling and fully chrome-plated•Matching shifter peg available separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILWITH HEEL RESTSDS-243525 Billet pegs $131.951904-2002 Billet pegs w/ rubber insert 149.95WITHOUT HEEL RESTSDS-243019 Billet pegs 109.951904-2001 Billet pegs w/ rubber insert 129.95

CHROME BILLET FOOTPEGS•Machined from 6061 T-6 billet aluminum•Male mount style, measure 43/8” L•Available with or without built-in heel rests•Hidden setscrews for height adjustment•Sold in pairs•Made in the U.S.A.

REAR SOFTAIL FOLDING FLUSH-MOUNT FOOTPEGS•Pegs are designed to follow the curvature of the frame so when they are in the up position they fit flush with the frame

•Fit in the factory rear peg location and take just moments to install; even simpler then the standard peg set up

•CNC-machined from 6061 aluminum with chrome finish

•Use stainless steel springs and pins•Available in a cutout design•Made in the U.S.A.

VICE FOOTPEGS•Match the Vice hand grips and shifter pegs•CNC-machined•Removable end cap sealed with an O-ring for easy installation and storage of registration•Will work with stock female Clevis if used with PART #1620-0569 •Male mounts sold separately•Sold in pairs•Made in the U.S.A.

1620-0177

1603-0008

1904-2002

DS-243019

PART # DESCRIPTION SUG. RETAILFOR FXST, FLST WITH WIDE TIRE SWINGARMS (EXCEPT MODELS WITH SHOTGUN EXHAUST)1620-0067 Chrome $240.951620-0068 Black powder-coated 239.95

PART # DESCRIPTION SUG. RETAILFOR ALL FXST, FLST (EXCEPT MODELS WITH SHOTGUN EXHAUST)1620-0069 Black powder-coated $239.951904-1029 Chrome 218.95

1620-0067

1620-0068

1620-0069

PART # DESCRIPTION SUG. RETAIL1620-0566 Chrome $128.951620-0567 Black 128.951620-0568 Solid brass 164.951620-0569 Male mounts for stock H-D female clevis, polished stainless (pr.) 82.95

1620-0566

1620-0567

1620-0568

1620-0569

PART # DESCRIPTION SUG. RETAIL1603-0093 Chrome $64.951603-0094 Black 64.951603-0095 Brass 81.95

VICE SHIFTER PEGS•Match the Vice hand grips and foot pegs•CNC-machined•Sold each•Made in the U.S.A.

1603-0093

1603-0094

1603-0095


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1091

PART # DESCRIPTION SUG. RETAILFOOTPEGS1904-3393 Round hole, chrome $155.951620-0404 Round hole, black 155.951620-0455 Oval hole, chrome 155.951620-0405 Oval hole, black 155.951620-0751 Teardrop, chrome 189.951620-0752 Teardrop, black 189.95

PART # DESCRIPTION SUG. RETAILSHIFT PEGS1904-1074 Round hole, chrome $56.951603-0062 Round hole, black 56.951904-1079 Oval hole, chrome 56.951603-0063 Oval hole, black 56.951603-0124 Teardrop, chrome 94.951603-0125 Teardrop, black 94.95

BILLET FOOTPEGS AND SHIFT PEGS•Machined from 6061 T-6 billet aluminum•Choose from chrome or black finish•Footpegs are available with male mounts•Matching shift pegs sold separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOOTPEGS1620-0379 Black $169.951620-0380 Chrome 169.951620-0676 Black diamond edge 269.95

PART # DESCRIPTION SUG. RETAILSHIFT PEGS1603-0054 Black $41.951603-0055 Chrome 41.951603-0098 Black diamond edge 79.95

FOOTPEGS AND SHIFT PEGS•Billet aluminum construction•Footpegs are male-mount design•Footpegs are sold in pairs; shift pegs are sold each


PART # DESCRIPTION SUG. RETAILFOOTPEGS1620-0516 Rubber-wrapped, chrome (pr.) $99.951620-0517 Rubber wrapped, black (pr.) 99.951620-0692 Rubber insert, chrome (pr.) 199.951620-0693 Rubber insert, black (pr.) 199.95SHIFT PEG1603-0082 Rubber-wrapped, chrome (ea.) 24.951603-0083 Rubber-wrapped, black (ea.) 24.95

PART # DESCRIPTION SUG. RETAILREPLACEMENT COMPONENTS1620-0518 Repl. footpeg rubber for rubber-wrapped (ea.) $5.951603-0084 Repl. shift rubber for rubber-wrapped (ea.) 4.951620-0694 Repl. footpeg rubber for rubber-insert (ea.) 14.951620-0695 Repl. shift rubber for rubber-insert (ea.) 9.952404-0367 Chrome footpeg hardware kit 14.95

CONTOUR FOOTPEGS AND SHIFT PEDALS•Designed to match Performance Machine Contour grips

•Rubber-wrapped or rubber-insert styles•Male-mount design fits most H-D applications•Available in black anodized or chrome finish•Replacement rubber and chrome hardware upgrade available separately


PART # DESCRIPTION SUG. RETAILDS-253452 For 00-10 FXST $189.95DS-253450 Universal w/ folding mounts 199.95

CHROME BILLET CLASSIC PASSENGER FOOTPEGS•Billet passenger footpegs that match Performance Machine’s chrome billet classic forward controls


1904-3393 1620-0455

1620-0404

1620-0405 1904-1074

1603-0062

1904-1079

1603-0063

1620-07521620-0751

1603-0125

1603-0124

1603-0054

1603-0055

1603-0098

1620-0380

1620-0676

1620-0516 1620-0517

1620-0692

1603-0082 1603-0083

2404-0367

DS-253452


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1092

PART # DESCRIPTION SUG. RETAILFOOTPEGS1620-0284 1” Ball-milled $202.951620-0285 3” Ball-milled 212.95

PART # DESCRIPTION SUG. RETAILFOOTPEGS (CONT)1620-0286 1” Flamed $204.951620-0287 3” Flamed 212.95

PART # DESCRIPTION SUG. RETAILSHIFT PEGS1603-0048 Ball-milled $51.951603-0049 Flamed 51.95

DEAD END FOOTPEGS/SHIFT PEGS•Chrome-plated, CNC-machined 6061 billet aluminum

•Footpegs sold in pairs; shift pegs sold each•Made in the U.S.A.

1620-02871620-0284

1603-0049

FOOTPEGS AND SHIFTER PEGS•Available in black anodized, brass or chrome finishes•Features a radial or full knurled design•Male mount footpegs sold in pairs, shifter peg sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1620-0564 Full knurled black footpegs $173.951620-0689 Full knurled brass footpegs 199.951620-0690 Radial knurled chrome footpegs 173.95

PART # DESCRIPTION SUG. RETAIL1620-0691 Radial knurled brass footpegs $199.951603-0102 Radial knurled brass shifter peg 71.951603-0091 Full knurled black shifter peg 69.95

1620-0564

1620-0690

1603-0102

MALTESE CROSS FOOTPEGS•Made from 6061 billet aluminum•Choice of black anodized or black powder-coated finish

•Perfect match for Maltese Cross grips and risers•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILMALE-MOUNT FOOTPEGS (PR.)1620-0191 Black footpeg, polished cross $173.951620-0565 Black footpeg, gold cross 173.95SHIFTER/BRAKE PEGS (EA.)1603-0012 Black peg, polished cross 69.951603-0092 Black peg, gold cross 69.95

1620-0191

1620-0565

1603-0012

1603-0092

PART # DESCRIPTION SUG. RETAILFOOTPEGS1620-0793 Scalloped, chrome $79.951620-0794 Scalloped, black 79.951620-0795 Engraved, chrome 79.951620-0796 Engraved, black 79.951620-0797 Smooth, chrome 79.951620-0798 Smooth, black 79.95SHIFT PEGS1603-0136 Scalloped, chrome 29.951603-0137 Scalloped, black 29.951603-0138 Engraved, chrome 29.951603-0139 Engraved, black 29.951603-0140 Smooth, chrome 29.951603-0141 Smooth, black 29.95

SOFT-TOUCH FOOTPEGS AND SHIFT PEGS•Excellent traction control as well as great style•Billet aluminum pegs available with dimpled rubber inserts and either a chrome or black anodized finish

•Matches Ness Soft-Touch grips on page 781

1620-0793

1620-0691

1620-0689

1620-1796


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1093

STYLE FOOTPEGS SHIFT PEG REPLACEMENT BANDSDeep Cut, chrome 1620-0522 1603-0087 -Deep Cut, black 1620-0523 1603-0088 -Torpedo 1620-0056 1603-0001 -Rocket 1620-0403 1603-0061 -Retro 1620-0406 1603-0064 -10-band DS-253691 DS-253692 -Twister DS-253701 DS-253703 -Twister, black 1620-0054 1603-0019 -Diamond Twister w/ flat bands DS-253717 DS-253718 DS-243152 (footpegs, 12-pk.), DS-253729 (shift peg, 4-pk.)Knurled DS-253720 DS-253727 DS-253726 (footpegs, 8-pk.), DS-253729 (shift peg, 4-pk.)Knurled, flare tip 1620-0439 1603-0070 -Grooved DS-253733 DS-253735 -Grooved, black 1620-0234 1603-0020 -Flamed DS-253740 DS-253742 DS-243152 (footpegs, 12-pk.), DS-253729 (shift peg, 4-pk.)

PART # SUG. RETAILDS-243152 $13.95DS-253691 109.95DS-253692 42.95DS-253701 109.95DS-253703 39.95DS-253717 109.95DS-253718 39.95DS-253720 109.95

PART # SUG. RETAILDS-253726 $14.95DS-253727 36.95DS-253729 6.95DS-253733 109.95DS-253735 42.95DS-253740 109.95DS-253742 36.951603-0001 36.95

PART # SUG. RETAIL1603-0019 $59.951603-0020 54.951603-0061 42.951603-0064 42.951603-0070 42.951603-0087 49.951603-0088 49.951620-0054 139.95

PART # SUG. RETAIL1620-0056 $99.951620-0234 139.951620-0403 109.951620-0406 109.951620-0439 129.951620-0522 139.951620-0523 139.95

NESS-TECH® FOOTPEGS AND SHIFT PEGS•Machined from 6061 T-6 billet aluminum; available in chrome or black anodized•Footpegs are available with male mounts•Matching shift pegs sold separately

PRICE CHART

1620-0522

1603-0087

1620-0523

1603-0088

1603-0001

1620-0056 1620-0403

1603-0061

1620-0406

1603-0064

DS-253691

DS-253692

DS-253701

DS-253703

1620-0054

1603-0019

DS-253717

DS-253718

DS-253720

DS-253727

1620-0439

1603-0070

DS-253733

DS-253735

1620-0234

1603-0020

DS-253742

DS-253740


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1094

PART # DESCRIPTION SUG. RETAILX-FACTOR PEGS1620-0288 Male mount, 61/4” long $151.95GOTHIC PEGS1624-0025 Male mount, 41/2” long 151.951622-0014 Shifter/brake, 31/2” long (ea.) 71.95KNURLED PEGS1811-8503 Male mount, 51/4” long 151.951811-8505 Rigid mount, 73/4” long 157.951811-8504 Shifter/brake, 21/4” long (ea.) 61.95

PART # DESCRIPTION SUG. RETAILRUBBER PEGSDS-243652 Rubber (male-mount), 51/2” long; chrome $140.951620-0710 Rubber (male-mount), 51/2” long; Night Series 139.95DS-243650 Rigid mount, 73/4” long 157.95DS-243651 Shifter/brake, 37/8” long (pr.) 98.95REPLACEMENT RUBBER INSERTS FOR RUBBER PEGS1904-7540 For shifter/brake peg 8.951904-7541 For male-mount footpeg 8.951904-7542 For rigid-mount footpegs 8.95

CHROME FOOTPEGS AND SHIFTER/BRAKE PEGS•Billet 6061 T-6 aluminum construction•Shifter/brakes peg fits most shifter and brake pedals that accept bolt-on peg



RETAIL1620-0290 Phantomz passenger footpegs $144.95

PHANTOMZ FOLDING PASSENGER FOOTPEGS•High-quality billet aluminum construction with a chrome finish

•Match Phantomz forward controls•1/2”-13 mounting holes•Measure 43/4” L; 61/2” L overall with mount•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-253411 Male mount footpegs $90.95DS-253412 Shift peg 26.95

DIAMOND II FOOTPEGS AND SHIFT PEGS•High-quality, chrome-plated billet aluminum•Matching covers available for air cleaner, master cylinder and brake caliper insert

•Matching shifter peg sold separately•Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL

MALE-MOUNT FOOTPEGS1620-0071 Rubber $109.951620-0526 Ali Baba 109.95

PART # DESCRIPTION SUG. RETAILSHIFT PEGS1603-0004 Rubber $39.951603-0089 Ali Baba 39.95

CUSTOM FOOTPEGS•Chrome-plated billet footpegs•Mount to OEM-style footpeg clevis•Matching shifter pegs also available•Made in the U.S.A.

Rubber pegs Left

Rubber pegs Right

1620-0071 1603-0004

1603-0089

DS-253411

DS-253412

1620-0288

1624-0025

1622-0014

DS-243652

1811-8503

1811-8505

1811-8504

DS-243650

DS-243651

1620-0526


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1095

PART # DESCRIPTION SUG. RETAILPASSENGER PEGS (PR.)1620-0596 Chrome $234.951620-0597 Black anodized 234.95

PART # DESCRIPTION SUG. RETAILSHIFTER/BRAKE TOE PEGS (EA.)1603-0096 Chrome $48.95 (ea.)1603-0097 Black anodized 48.95 (ea.)

PASSENGER PEGS AND SHIFTER/BRAKE PEGS•Fold-up rubber insert passenger pegs•Shifter/brake toe peg with rubber insert•Available in chrome or black anodized•Match Hawg Halters forward controls•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1620-0050 Scimitar $143.95

PART # DESCRIPTION SUG. RETAIL1620-0051 Rubber band $116.95

PART # DESCRIPTION SUG. RETAILDS-253487 Ball-milled $116.95

BILLET FOOTPEGS•Available in scimitar, rubber band and ball-milled styles

•Fit all applications with male mount footpegs•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-253489 Adjustable billet footpegs $132.95

ADJUSTABLE BILLET FOOTPEGS•51/2” footpegs can be comfort-adjusted by loosening the center bolt and turning to any angle

•Chrome finish with a ball-milled design•Fit all bikes using male mount footpegs•Sold as a pair•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-253309 Banded w/ 1/2”-13 mounting hole $126.95DS-253310 Banded w/ 3/8”-16 mounting hole 115.951620-0283 Slotted w/ 1/2”-13 mounting hole 138.95DS-253011 Repl. footpeg rubbers for Banded pegs

(6-pc. set) 13.95

FOLDING FOOTPEGS•Fold-up design adds convenience•Chrome billet footpegs with either 1/2”-13 or 3/8”-16 mounting holes•Two styles available: banded with rubber pads or slotted style•Great match for the Thunder Heart forward controls•Made in the U.S.A.; sold in pairs

PART # DESCRIPTION SUG. RETAILMC220 1”-11/4” U-clamp mount $62.95MC320 1” aluminum mount; index adjustable 67.95

FOOTPEGS•Dress up your bike – or add that finishing custom touch

•Sold in pairs

1620-0596 1620-0597

1603-00961603-0097

1620-0050

1620-0051DS-253487

DS-253309

1620-0283

MC220MC320


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1096

PART # DESCRIPTION SUG. RETAILFOOTPEG MOUNT KIT (BLACK ONLY)1620-0680 For 03-07 XB9R Firebolt, 03-04 XB9S Lightning,

04 XB9SL Lightning, 05-09 XB9SX Lightning, 08-09 1125R, 03-09 XB12R Firebolt, 04-09 XB12S Lightning, 05-09 XB12Scg Lightning, 06-07 XB12Ss Lightning, 08-09 XB12STT Lightning $74.95

STANDARD FOOTPEGS (PR.)1620-0558 Silver 39.951620-0559 Black 44.95

PART # DESCRIPTION SUG. RETAILSTANDARD FOOTPEGS (PR.) (CONT)1620-0560 Chrome $49.95STUNT FOOTPEGS (PR.)1620-0561 Black 54.951620-0562 Chrome 59.95LONG FOOTPEGS (PR.)1620-0711 Chrome 49.951620-0712 Black 46.951620-0713 Silver 41.95

360° ADJUSTABLE FOOTPEG MOUNT KIT AND FOOTPEGS•Adjustable footpeg mount delivers the perfect position for any riding style; mounts directly to OEM rear sets and is adjustable to 56 positions•Mount kit includes two adjustable swivel plates, two folding mounts and all required hardware; must be used with Cycle Pirates footpegs•Standard round footpegs measure 68mm L x 25mm dia., are made from 6061 aluminum and have a knurled surface•Stunter pegs are almost twice the diameter of the standard pegs (65mm L x 45mm dia.), are made from 6061 aluminum and have a knurled surface•Long footpegs measure 80mm L x 25mm dia., are made from 6061 aluminum and have a knurled surface•Mount kit and footpegs can be used with OEM or Cycle Pirates’ adjustable shifter and brake levers (sold separately)

PART # DESCRIPTION SUG. RETAIL1603-0111 Custom contour, chrome $37.951603-0112 Custom contour, black anodized 37.951603-0113 Tribal, chrome 37.951603-0114 Tribal, black anodized 37.951603-0143 Air cushioned, chrome 37.951603-0144 Air cushioned, black anodized 37.95

CUSTOM SHIFTER PEGS•Feature an ergonomic AVON seamless rubber grip technology•Available in three different styles in either chrome or black anodized•See page 782 for matching hand grips •Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1620-0736 Custom contour, chrome $99.951620-0737 Custom contour, black anodized 99.951620-0738 Tribal, chrome 99.951620-0739 Tribal, black anodized 99.951620-0802 Air cushioned, chrome 99.951620-0803 Air cushioned, black anodized 99.95

CUSTOM MALE-MOUNT FOOTPEGS•Custom folding footpegs featuring an ergonomic AVON seamless rubber grip technology

•Come in chrome or black anodized•Fit OEM standard female mount•See page 782 for matching grips •Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFTP-200 Multi-facet style footpegs $99.95

MULTI-FACET FOOTPEGS•Unique design and mirror-like polish reflects light like nothing else

•Made of show-quality chrome-plated 6061 T-6 billet aluminum

•Measure 4.3” L x 1.375” diameter•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2401-0356 Grooved footpeg bolt kit $23.95

GROOVED FOOTPEG BOLT KIT•Functional, stylish fasteners with grooved socket-heads

•Certified SDF (Seamless and Defect Free) stainless steel, with threads rolled to a UNJ3A spec

•Sold in set of four•Made in the U.S.A.


RETAILFOR 1” WIDE MOUNTS1620-0791 10-pk. $2.95 (ea.)1620-0790 Pair 5.95


RETAILFOR 15/16” WIDE MOUNTS1904-5041 10-pk. $2.95 (ea.)1620-0792 Pair 5.95

CHROME FOOTPEG MOUNTING PINS•Chrome-plated hardened steel•Pins are held in place with snap rings•Available for 15/16” and 1” wide peg mounts•Sold in 10-pk. or in pairs

PART # DESCRIPTION SUG. RETAILSFB-740 Sleek footpeg bolts $24.95

SLEEK FOOTPEG BOLTS•Bolts screw into each other, eliminating unsightly nut and extra thread

•Stainless steel construction with mirror polished heads

•3/8” diameter barrel•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-253005 Footpeg spring washers; repl. OEM #50912-72 $.95 (ea.)

FOOTPEG SPRING WASHERS•Used for creating friction on male-mount footpegs

•Can be used on most aftermarket male-mount footpegs

•Sold each to consumer; sold to dealer in 10-pack

1620-06801620-0558

1603-0111

1603-0113 1603-0114

1603-01431603-0144

1603-0112

1620-0736

1620-0737

1620-0738

1620-0739

1904-5041

1620-08031620-0802

1620-0561 1620-0711


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1097

PART # DESCRIPTION SUG. RETAIL1624-0045 For 94-11 FXDL/FXD models, 94-11 FLHTC

models and 94-06 FHLTCU models $59.95

SHORT-BONES HIGHWAY PEG BRACKETS•Designed with the short-inseam rider in mind•Simple and cost-effective way to relocate the stock highway bar pegs•Bolt-on for Dyna Lowrider•Universal fit for models with 11/4” engine guards when used with engine guard clamp PART #2404-0363 and footpeg clevis mount PART #DS-253483

•Brackets are made of polished billet aluminum•Include easy-to-follow instructions for quick installation•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1620-0363 For 04-11 XL models, chrome; repl. OEM #49322-04 $84.951620-0705 For 04-11 XL models, black; repl. OEM #49322-04 85.95DS-252990 For 86-03 XL, chrome; repl. OEM #50610-86T 37.95

PASSENGER FOOTPEG MOUNT KITS•Used for mounting passenger footpegs or replacing existing OEM footpeg mounts

•Includes mounting hardware•Accepts most male mount pegs•Available with chrome or black finish•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-253483 Footpeg clevis mount for 84-94 FX, FXR,

FXST; 86-93 XL, with 1/2”-20 thread; repl. OEM #50900-72 (ea.) $12.95

DS-253492 Footpeg clevis mount with 3/8-24” thread (pr.) 18.95

REPLACEMENT CHROME FOOTPEG MOUNTS•Make it possible to mount Drag Specialties or OEM footpegs in any location

•Chrome-plated steel construction

PART # DESCRIPTION SUG. RETAIL1620-0183 W/ 2” lockable offset $63.951620-0184 W/ 4” lockable offset 63.95

MALE MOUNT LOCKABLE OFFSETS•Feature a cogged head that lets you adjust the offset

•Gives a huge range of adjustment without the fear of the peg slipping•Can be used for highway pegs, passenger pegs, or any H-D-style male-mount application

•Tapered end accepts any Küryakyn footpeg•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-253593 Offset peg mounts (1/2”-13 mounting bolts) $52.95

OFFSET PEG MOUNTS•Can be adjusted to short, tall or in-between riders

•Allow you to upgrade an existing set of highway or passenger pegs

•Fit all male-style pegs•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0801 Serrated male-mount footpeg mounts (pr.) $19.95

SERRATED MALE-MOUNT FOOTPEG MOUNTS•Accept male-mount style footpegs•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1620-0684 For 93-09 FLT, FLHT, FLHR, FLTR, FLHX $99.95

ADJUSTABLE PASSENGER PEG MOUNTS•Direct replacement for the stock passenger floorboards•Accept any male-mount style footpegs or male-mount mini boards•Adjust to any of the three stock positions, and rotate a full 360° around the mount

PART # DESCRIPTION SUG. RETAIL1904-8001 Footpeg elevators $96.95

CHROME FOOTPEG ELEVATORS•Used to raise the driver footpegs about 1”

•Include mounting blocks, button head bolts and nuts; sold in pairs


DS-253483 DS-253492

DS-2529901620-0363

1620-0705

1620-0183

1620-0184

PART # DESCRIPTION SUG. RETAILFOR 06-11 DYNA GLIDE MODELS1620-0759 Chrome, repl. OEM #49249-06 $99.951620-0760 Wrinkle black, repl. OEM #50210-06 99.95

PASSENGER FOOTPEG MOUNT KITS•Kits include left and right side mounts with hardware

•Accept most male-mount style footpegs•Available in chrome or wrinkle black finish

1620-0759 1620-0760


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1098

PART # DESCRIPTION SUG. RETAILDS-253053 2” blocks $19.95DS-253054 3” blocks 19.95DS-253055 4” blocks 19.95DS-253056 5” blocks 21.95

5/8” SQUARE FOOTPEG MOUNTING BLOCKS•Chrome steel construction; available in several lengths•Accept most female footpegs•Used on motor mount bars as well as passenger footpeg bars•Come with 3/8”-16 x 3/4” bolts; sold in pairs

PART # DESCRIPTION SUG. RETAILDS-253484 For 85-86 FX; repl. OEM #s 47116-77 and 47117-77 $41.95

PASSENGER FOOTPEG BRACKET SET•Chrome passenger footpeg mounting plates and clevis replace the rear footrest brackets

•Any male mount pegs can be used with this bracket set

PART # DESCRIPTION SUG. RETAILCHROME1620-0005 W/ custom exhaust $249.951620-0045 W/ stock or Screamin’ Eagle exhaust 249.95BLACK1620-0524 W/ custom exhaust 249.951620-0525 W/ stock or Screamin’ Eagle exhaust 249.95

ROAD-ROD® PASSENGER FOOTPEG RELOCATION KIT•Relocates the passenger footpegs to the swingarm pivot shaft•Includes a pivot shaft, chrome-plated end caps and clevises•Available in chrome or black powder-coat•Made in the U.S.A.

NOTE: Does not fit VRSCD.

PART # DESCRIPTION SUG. RETAIL1620-0521 For 86-11 FXST/FLST w/ RSD/Vance & Hines

Tracker 2-into-1 exhaust system $69.95

PASSENGER FOOTPEG RELOCATION BRACKETS•Allows use of passenger pegs with RSD/Vance & Hines Tracker 2-into-1 exhaust system

•Raises passenger pegs 4” above OEM location•Machined from billet aluminum with a black powder-coat finish•Mounts directly to existing passenger peg mounting hole•Accepts OEM pegs or any aftermarket male-mount style pegs•All mounting hardware included•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-253486 For all 84-99 FXST/FLST $19.95

PASSENGER PEG RELOCATION KIT•Designed to relocate the passenger footpegs so the passenger can lean back against a sissy bar

•Attaches to the frame using stock fender strut bolts

•Chrome finish

NOTE: Footpegs and mounting clevis not included in kit.

PART # DESCRIPTION SUG. RETAILDS-253485 For 84-99 FXST $21.95

PASSENGER FOOTPEG RELOCATION KIT•Offers an extra footpeg location for the passenger

•Threads into the unused seat mounting hole

NOTE: Will also fit FLST models if OEM frame-mounted seat is not used.


RETAIL1811-2990 21/2” front peg mounts

w/ 3/8”-16 x 11/2” mounting bolts $75.951811-2991 11/2” rear peg mounts w/ 1/2”-13 mounting holes 75.951811-2992 11/2” rear peg mounts w/ 3/8”-16 x 2” mounting bolts 75.95

CHROME FOOTPEG MOUNTS•Precision-machined billet T-6 aluminum

•Accept most male-mount pegs and include 3/8” button head peg mounting bolts


PART # DESCRIPTION SUG. RETAILDS-253063 Male-peg mounts $67.95

CHROME FOOTPEG MOUNTS•Used to mount male-mount pegs to JayBrake forward controls or custom applications

•Will accept any male-mount peg•Mount is 2.9” long and has a 3/8”-16 mounting hole•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1620-0671 Splined adapter mounts $21.95

SPLINED ADAPTER MOUNTS•For use with Küryakyn peg/offset combinations

•Adapts Küryakyn footpegs or footpeg mounts to Küryakyn offset mounts

•Chrome finish•Sold in pairs

FOR 02-10 VRSCA/B/C V-ROD

1620-0005

DS-253053

DS-253054

DS-253055

DS-253056

1811-2990

1811-2991

1811-2992


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1099

UNIVERSAL FOOTPEG MOUNTS•Clean, stylish design and 6061 T-6 aluminum construction

•Work with any male-mount footpegs•Easy bolt-on design•Threaded 1/2”-13; also counter-bored to accept stock 00-11 bolt that mounts through the outside



RETAIL1620-0678 Chrome $89.95


RETAIL1620-0679 Black anodized $89.95

1620-0678

SHORT MAGNUM PEG MOUNTS•Accept all standard male mount pegs•1/2”-13 threads•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-253596 Short Magnum peg mounts $32.95

HIGHWAY FOOTPEG CLAMP AND MOUNT SETS•Three-piece design features chrome-plated steel clamp with billet 6061 T-6 aluminum footpeg mount

•State-of-the-art design resists slipping•Available in 1”, 11/8” and 11/4” dia.•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILHCM-208 1” dia. clamps $52.95HCM-209 11/8” dia. clamps 52.95HCM-210 11/4” dia. clamps 52.95

HCM-208

FOOTPEG MOUNTS•Add pegs where you want them

•CNC-machined from billet 6061 T-6 aluminum

•Fit all standard male style pegs•Measure 1.5” x 1” diameter•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILHPB-590 Footpeg mounts $33.95

UNIVERSAL CRUISE PEG MOUNTS•Uses Küryakyn’s Magnum Quick Clamps and Clevis mounts for custom male-mount footpeg installation

•11/2” diameter clamping area makes these ideal for use on engine guards

•Beautiful chrome finish•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1624-0151 Universal Cruise Peg mounts w/ 11/2”

Magnum Quick Clamp $73.95

11/4” CLAMP-ON PEG MOUNTS•Chrome-plated die-cast design•Accept male mount footpegs only

•Sold in pairs•Made in the U.S.A.PART # DESCRIPTION SUG. RETAILDS-203000 11/4” peg mounts $49.95

BIG BUFFALO FOOTPEG MOUNTS•Designed for use with Big Buffalo or other 1.5” diameter engine guards

•Two-piece clamp design for a clean, custom installation at the height you want

•Accept most male-mount style footpegs•Available in chrome or gloss-black powdercoat•Sold in pairs •Made in the U.S.A.PART # DESCRIPTION SUG. RETAIL1620-0672 Chrome $154.951620-0673 Black 129.95

1620-0672

1620-0673

CHROME UNIVERSAL ACCESSORY MOUNTS•Chrome mounts with universal fitment may be used to mount driving lights, footpegs and many other types of accessories

•Fit 1” diameter tubing•Sold in pairsPART # DESCRIPTION SUG. RETAILDS-720218 Chrome universal mounts $29.95

TWO-PIECE FOOTPEG CLAMPS•Chrome-plated CNC-machined billet aluminum

•Fit 11/4” engine guards or frame•Accept male-mount pegs•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1611-2123 Footpeg clamps; repl. OEM #50957-02 $59.95

CHROME CLAMP FOR FOOTPEG BARS•Includes clamps, tapered washers and all necessary nuts and bolts

•Allows installation of footpeg bars to 1” or 11/4” frame members

•Sold eachPART # DESCRIPTION SUG. RETAILDS-243803 Chrome clamp assembly $6.25

PART NO. DESCRIPTION PRICE1624-0125 11/4” i.d. fits H-D engine guards (pr.) $43.951624-0126 11/2” i.d. fits some engine guards and Boss Hoss (pr.) 43.95

MAGNUM™ QUICK CLAMPS•Stainless steel construction•1/2” mounting hole•Sold eachPART # DESCRIPTION

SUG. RETAIL

2404-0362 7/8” $7.952404-0365 1” 7.952404-0366 11/8” 7.95


RETAIL2404-0363 11/4” $7.952404-0364 11/2” 9.95

THREE-PIECE FRAME CLAMPS•Heavy-duty, chrome-plated three-piece clamps can be used for mounting exhausts, brake switches, footpegs, driving lights or other custom applications

•Sold each


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

BLINKER BAR ELIMINATOR/ LICENSE PLATE MOUNT•CNC machined from billet aluminum•Eliminates unsightly rear turn signal bar and uses OEM hardware•Works with stock license plate light assembly (H-D OEM #69353-05)•Use in conjunction with Klock Werks LED marker lights for a finished and functional look

LAYDOWN LICENSE PLATE MOUNTS•Customized chrome lay-down style license plate mounts

•Replaces the upright OEM mount•Bolts to the mounting tab on the OEM taillight•Includes a chrome support bracket and chrome hardware•Accepts most standard size license plate frames•Made in the U.S.A.

1100

PART # DESCRIPTION SUG. RETAILCUSTOM STYLEDS-720185 Small radius $59.95DS-720192 Large radius 58.95THREE-BOLT STYLE7807-0114 Three-bolt hole 74.95

CHROME RADIUS LICENSE PLATE MOUNTS•Radius license plate mounts offer a unique custom look•Custom style available in small radius for fenders up to 8” wide and large radius for fenders 8” and wider

•Both sizes require custom installation; mount using vertical studs on a backing plate

•Three-bolt style fits most OEM fenders that have three-hole bolt pattern (not for bobbed fenders)

•All mounts include frame, backing plate and hardware•Accepts most 4” x 7” license plates•Made in the U.S.A.

NOTE: Check tire-to-fender clearance before operating. PART # DESCRIPTION SUG. RETAILDS-270110 For 91-08 FLT, FLHT, FLHR and 86-11 FLST

models (except FLSTS/FLSTF, 05-11 FLSTN) $122.95

BILLET LICENSE PLATE MOUNT•Chrome-plated billet aluminum•Eliminates the OEM turn signal bar, fits under stock and most aftermarket taillights

•Designed for 4” x 7” license plates•Can be used with most license plate frames; sold separately•Includes brackets to allow the removal of the OEM license plate mount bar


NOTE: Use of this license plate mount will require custom mounting of rear turn signals. On certain models, mounting holes may need to be enlarged to 5/16”.

PART # DESCRIPTION SUG. RETAILFOR 91-08 FLT, FLHT, FLHR AND 86-11 FLST MODELS (EXCEPT FLSTS/FLSTSB, 05-11 FLSTN)2030-0527 Chrome $259.952030-0528 Raw 225.95

PART # DESCRIPTION SUG. RETAILDS-720814 For 84-11 models w/ the license plate

mounted to the fender above the taillight $26.95

CHROME LICENSE PLATE MOUNT•Chrome 4” x 7” mount comes with dual rubber gaskets, allowing the angle of the mount to be raised or lowered to meet your needs

•All necessary hardware is supplied

PART # DESCRIPTION SUG. RETAIL2030-0508 For 06-11 FXST/FXSTC/FLSTSB $84.952030-0509 For 06-08 FXDWG 89.95

LICENSE PLATE/TAILLIGHT BRACKETS•Heavy duty steel construction with a bright chrome finish•Frame area measures approximately 5” x 71/2”•Accept taillight DS-272027 or most custom taillights with 41/2” on-center mounting studs (taillights sold separately)

•Mount directly to the OEM rear fenders with existing hardware on models listed PART # DESCRIPTION SUG. RETAIL

FOR 97-03 FLSTS, 05-07 FLSTSCDS-720133 Steel $49.95DS-720134 Billet 62.95

DS-720185

DS-720192 Shown w/ 2030-0214(sold separately)

7807-0114

2030-0508

2030-0509

2030-0527

DS-720133 DS-720134


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1101

LICENSE PLATE/TAILLIGHT BRACKETS•Brackets mount a cat eye taillight, either as a direct bolt-on replacement for stock 85-86 FXWG and 84-99 FXST rear fenders, or on 85 FX models with our Quickbob fender (DS-380032)

PART # DESCRIPTION SUG. RETAILDS-270120 For FX with Quickbob $45.95DS-270119 For FXST and FXWG 28.95

DS-270120 DS-270119

SIDE MOUNT LICENSE PLATE MOUNT•Chrome-plated CNC-machined billet construction•Swingarm mount style, uses clamp to install on the swingarm tube•Includes license plate light and LED tag light•Accepts most 4” x 7” license platesPART # DESCRIPTION SUG. RETAILFOR 08-11 FXST/FLST2010-0736 Horizontal $169.952010-0737 Vertical 169.95

2010-0736

2010-0737

SIDE-MOUNT LICENSE PLATE MOUNTS•Simple and sturdy way to mount a license plate•Mounts horizontally to most 3/4” axles•Made from tough stainless steel for durability and great finish•PART #s 2030-0345 and 2030-0346 accept most cat eye style tail lights•Made in the U.S.A.PART # DESCRIPTION SUG. RETAIL2030-0343 Left side $68.952030-0344 Right side 68.952030-0345 Left side w/ cat eye light mount 71.952030-0346 Right side w/ cat eye light mount 71.95

2030-0343

2030-0346

CHROME LICENSE PLATE FRAME•Chrome die-cast 4” x 7” frame

PART # DESCRIPTION SUG. RETAILDS-270220 License plate frame $7.95

LED LICENSE PLATE FRAME•Chrome-plated frame features two rows of LEDs

•Includes red and clear diamond-style lenses

•Lights can be wired for tag light, taillight or brake light

PART # DESCRIPTION SUG. RETAILDS-720665 Fits 4” x 7” license plates $59.95

LED LICENSE PLATE FRAME•Die-cast frame with a chrome finish

•Hidden mount design for a smooth look

•Features eight dual-function LEDs that can be wired in as additional taillight/brake light and four LED tag lights

•Accepts most 4” x 7” license plates

PART # DESCRIPTION SUG. RETAIL2040-0045 LED license plate frame $41.95

GROOVED LICENSE PLATE FRAME•Ball-end-milled aluminum license plate frame designed for use with OEM taillight bracket

•Available in a chrome finish•Frame measures 83/8” x 47/8”•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-720833C For 84-05 FXST and 80-86 FXWG models $49.95

“LIVE TO RIDE” LICENSE PLATE FRAME•Chrome-plated “Live to Ride” license plate frame•Features an eagle perched at the top•Center to center on the mounting holes measures 6” x 23/4”

PART # DESCRIPTION SUG. RETAILDS-720809 Chrome $12.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

EAGLE SPIRIT LICENSE PLATE FRAMES•Chrome die-cast license plate frames•Gold or chrome eagle and script embossed on the top of each plate•Measure 5” x 7”•Sold each

1102

PART # DESCRIPTION SUG. RETAILDS-720812 Gold $53.95DS-720813 Chrome 29.95

DS-720812

DS-720813

CHROME LICENSE PLATE FRAME•Chrome die-cast metal frame•Measures 4” x 7”•Includes chrome flat-head hardware•Fits great on PART #DS-270110 license mount

PART # DESCRIPTION SUG. RETAIL2030-0214 4” x 7” license plate frame $29.95

RADIUS BEND LICENSE/LIGHT BACKING PLATE•Chrome-plated billet aluminum backing plate bolts onto stock fender

•Features curved lines, radius edges and the Ness grooves on the face of the frame, with no visible mounting hardware for that sleek custom look

•Designed with a 30° bend on the taillight mounting section for more visibility on short fender applications

•Provides a solid mount for a Cat Eye taillight (sold separately)•Frames and taillights sold separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-720849 For 84-11 Harley (exc. FLSTS, FXST, FXDWG,

FXWG and VRSCA) $124.95

RADIUS GROOVED CHROME LICENSE BACKING PLATE•Available in billet aluminum•Comes with all hardware•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-720848 For 84-11 Harley (except FLSTS, FXST, FXSTD,

FXDWG, FXWG and VRSCA) $104.95

LED LICENSE PLATE FRAMES•Low profile design•Choice of chrome or black finish•Six white LEDs for illumination•Includes mounting hardware

PART # DESCRIPTION SUG. RETAIL2030-0532 Black $34.952030-0533 Chrome 34.95

2030-0532 2030-0533

BILLET LICENSE PLATE FRAMES•A necessity for any full-custom project; a huge impact in a high-profile area on any custom job

•CNC-machined to a jewel-like finish, then polished and Cobra Chrome-plated

•Mounting holes measure 53/4” x 23/4” on center


PART # DESCRIPTION SUG. RETAILBLV59000 71/4” x 41/4” $45.95

PART # DESCRIPTION SUG. RETAIL1905-0226 Rad II, chrome $69.95DS-720847 Radius grooved, chrome 59.952030-0139 Radius w/ light, chrome 76.952030-0361 Retro, chrome 79.952030-0521 Engraved, chrome 79.95

PART # DESCRIPTION SUG. RETAIL2030-0522 Engraved, black $79.952030-0524 Smooth, chrome 59.952030-0523 Smooth, black 59.952030-0525 Deep Cut, chrome 79.952030-0526 Deep Cut, black 79.95

LICENSE PLATE FRAMES•Billet aluminum construction, except for PART #2030-0139 which is chrome-plated die cast•Accept most 71/4” x 41/4” license plates•No exposed mounting hardware; bolts from the back side•Radius license plate frame looks best when used with backing plate PART #DS-720848, but will work with others•Lighted LED license frame PART #2030-0139 functions as a brake and taillight

2030-0361

2030-05222030-05232030-0524

2030-0526

1905-0226 2030-0139

DS-720847


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1103

PART # DESCRIPTION SUG. RETAILFOR 08-11 FXST/FLST2030-0339 Vertical w/o plate light $199.952030-0335 Vertical w/ plate light 229.952030-0435 Horizontal w/o plate light 199.952030-0449 Horizontal w/ plate light 229.95FOR 86-07 FXST/FLST2030-0257 Vertical w/o plate light 199.952030-0425 Horizontal w/o plate light 199.952030-0439 Horizontal w/ plate light 229.95FOR 08-11 FXD2030-0341 Vertical w/o plate light 199.952030-0337 Vertical w/ plate light 229.95

PART # DESCRIPTION SUG. RETAILFOR 08-11 FXD (CONT)2030-0437 Horizontal w/o plate light $199.952030-0451 Horizontal w/ plate light 229.95FOR 06-07 FXD2030-0262 Vertical w/o plate light 199.952030-0333 Vertical w/ plate light 229.952030-0433 Horizontal w/o plate light 199.952030-0447 Horizontal w/ plate light 229.95FOR 91-05 FXD2030-0258 Vertical w/o plate light 199.952030-0327 Vertical w/ plate light 229.952030-0427 Horizontal w/o plate light 199.95

PART # DESCRIPTION SUG. RETAILFOR 91-05 FXD (CONT)2030-0441 Horizontal w/ plate light $229.95FOR 05-11 XL2030-0261 Vertical w/o plate light 199.952030-0331 Vertical w/ plate light 229.952030-0431 Horizontal w/o plate light 199.952030-0445 Horizontal w/ plate light 229.95FOR 86-04 XL2030-0259 Vertical w/o plate light 199.952030-0329 Vertical w/ plate light 229.952030-0429 Horizontal w/o plate light 199.952030-0443 Horizontal w/ plate light 229.95

BLACK

PART # DESCRIPTION SUG. RETAILFOR 08-11 FXST/FLST2030-0338 Vertical w/o plate light $199.952030-0334 Vertical w/ plate light 229.952030-0436 Horizontal w/o plate light 199.952030-0450 Horizontal w/ plate light 229.95FOR 86-07 FXST/FLST2030-0011 Vertical w/o plate light 199.952030-0324 Vertical w/ plate light 229.952030-0426 Horizontal w/o plate light 199.952030-0440 Horizontal w/ plate light 229.95FOR 08-11 FXD2030-0340 Vertical w/o plate light 199.952030-0336 Vertical w/ plate light 229.95

PART # DESCRIPTION SUG. RETAILFOR 08-11 FXD (CONT)2030-0438 Horizontal w/o plate light $199.952030-0452 Horizontal w/ plate light 229.95FOR 06-07 FXD2030-0185 Vertical w/o plate light 199.952030-0332 Vertical w/ plate light 229.952030-0434 Horizontal w/o plate light 199.952030-0448 Horizontal w/ plate light 229.95FOR 91-05 FXD2030-0012 Vertical w/o plate light 199.952030-0326 Vertical w/ plate light 229.952030-0428 Horizontal w/o plate light 199.952030-0442 Horizontal w/ plate light 229.95

PART # DESCRIPTION SUG. RETAILFOR 05-11 XL2030-0184 Vertical w/o plate light $199.952030-0330 Vertical w/ plate light 229.952030-0432 Horizontal w/o plate light 199.952030-0446 Horizontal w/ plate light 229.95FOR 86-04 XL2030-0013 Vertical w/o plate light 199.952030-0328 Vertical w/ plate light 229.952030-0430 Horizontal w/o plate light 199.952030-0444 Horizontal w/ plate light 229.95

CHROME

IN CLOSE LICENSE PLATE HOLDERS•Billet aluminum with no visible fasteners•Most tucked-in holder on the market today•Mounts off the axle on FXST/FLST model applications and off the axle adjuster on FXD/XL applications•Accepts most 4” x 7” license plates•Choice of horizontal or vertical mount•Available with or without illumination•Available in chrome or black powder-coat finish•Not for use with shock relocation kits or saddlebags•Made in the U.S.A.

2030-0011 2030-0012 2030-00132030-0013 Back view

2030-0433

2030-0434

PART # DESCRIPTION SUG. RETAIL2030-0423 Chrome w/ plate light $129.952030-0424 Black w/ plate light 129.95

SLICK SIGNALS LICENSE PLATE FRAME•Polished aluminum with a chrome finish

•Dual-function red LEDs•Accepts most 4” x 7” license plates•Can be used in run/turn or run/stop applications

•Includes instructions for wiring•Requires custom installation•Made in the U.S.A.

NOTE: Lighting is not DOT approved.


RETAIL1410-0047 For Slick Signals

PART #2030-0423/0424 $69.95

SLICK SIGNALS FIBERGLASS RECESSED POCKET•Allow you to french in your Slick Signals license plate frame PART #2030-0423/0424 on custom rear fenders

•For custom applications only•Made in the U.S.A. PART # DESCRIPTION

SUG. RETAIL

2030-0093 Chrome $29.952030-0322 Chrome w/ plate lights 59.952030-0260 Black powder-coat 29.952030-0323 Black powder-coat w/ plate lights 59.95

BEVELED LICENSE PLATE FRAME•Aluminum construction•Blind-hole design for a clean line•Available with chrome or black powder-coat finish•Available with or without plate lights•Fits all 4” x 7” license plates•Made in the U.S.A.

2030-0093 2030-0260

2030-0424


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1104

LICENSE PLATE FRAMES WITH LINED LENS•Distinctive frames are made of ABS plastic with acrylic lenses, and feature a silk-screened line design

•Available with or without border to accept different size plates•Fits up to 4.9” x 8.2” plate size•Made in the U.S.A.

U.S. Patent #284,848.

PART # DESCRIPTION SUG. RETAILDS-720160 Chrome w/ lined lens $39.95DS-720170 Chrome w/ lined lens and border 39.95

DS-720160 DS-720170

LICENSE PLATE FRAME ASSEMBLY WITH LED LIGHT•Machined from 6061 billet aluminum with a show-polished finish

•Features LED light for plate visibility•Accepts 41/8” x 71/8” license plates•For custom applications•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2030-0293 License plate frame assembly w/ LED plate light $60.95

LICENSE AND TAILLIGHT MOUNTING BRACKETS•Chrome-plated billet aluminum•20° rake gives more tire clearance for lowered bikes

•Accept most flat-backed taillights with a 21/2” center-to-center mounting bolt configuration (must be purchased separately)


PART # DESCRIPTION SUG. RETAIL0902-2001 For 84-02 FXST $185.950902-2002 For 96-01 FXDWG 185.95

0902-2002

CHROME LICENSE PLATE FRAMES•Blind-hole design features mounting studs hidden on the back for an ultra-clean appearance

•Traditionally styled through-hole license plate frame uses countersunk mounting bolts (not included)

•CNC-machined from solid plate aluminum•Fits most 4” x 7” plates•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2030-0138 Blind-hole plate frame $38.952030-0137 Through-hole plate frame 36.95

2030-0138

2030-0137

SWEPT EAGLE LICENSE PLATE FRAME•Chrome-plated ABS frame with chrome-plated steel backing plate

•Backing plate is drilled for universal mounting, or mount in place of stock license plate bracket

•Fits 4” x 7” plates

PART # DESCRIPTION SUG. RETAIL2030-0299 For 97-08 FLHR, FLTR, FLHT $49.95

CURVED LAYDOWN LICENSE PLATE MOUNT•Ball-milled with a chrome-plated finish

•Mount matches the curve of the rear fender for a smooth, clean appearance

•Includes curved license plate frame

•For 4” x 7” plates

PART # DESCRIPTION SUG. RETAIL2030-0300 For 97-08 FLHT, 97-08 FLHR

(except 07-08 FLHRSE), 98-08 FLTR $72.95

CURVED SIDE-MOUNT LICENSE PLATE HOLDER•Built-in license plate light•Sized to fit 4” x 7” license plates

PART # DESCRIPTION SUG. RETAIL2030-0197 For 90-05 Dyna, 86-07 XL $136.95

PART # DESCRIPTION SUG. RETAIL2030-0144 Small frame (fits 4” x 7” plates) $29.952030-0145 Large frame (fits 4 3/8” x 8” plates) 29.95

BALL-MILLED LICENSE PLATE FRAMES•Glistening chrome finish with ball-milled accents

•Two sizes to fit most plates (minor modifications to some plates may still be necessary)

PART # DESCRIPTION SUG. RETAIL2030-0191 Curved license plate frame $69.95

CURVED LICENSE PLATE MOUNT WITH FRAME•Adds the finishing touch to Küryakyn’s Tombstone Taillights•Mounts to the existing holes on the Tombstone Taillight base plate (PART # 2010-0083 or 2010-0084)

•Two-piece design encapsulates any 4” x 7” license plate

2030-0144


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1105

SIDE-MOUNT LICENSE PLATE KITS AND BACKING PLATES•Allows you to run a side-mounted license plate on a folding mount

•Plate is displayed horizontally•License plate backing plates include billet aluminum backing plate, license plate frame and necessary hardware

•White LED license plate light at the top of the plate frame

•Mounts and backing plate sold separately; you must order one mount and one backing plate kit for a complete assembly

PART # DESCRIPTION SUG. RETAILAXLE SIDE MOUNTS2030-0542 For 08-11 FXST/FLST w/ 25mm axle, chrome $219.952030-0543 For 08-11 FXST/FLST w/ 25mm axle, black 219.952030-0546 For 07-08 FXST/FLST w/ 1” axle, chrome 149.952030-0545 For 00-07 FXST/FLST w/ 3/4” axle, chrome 149.952030-0544 For 86-99 FXST/FLST w/ 3/4” axle, chrome 149.95


RETAIL2030-0192 Curved laydown license

plate mount w/ frame $69.95

CURVED LAYDOWN LICENSE PLATE MOUNT WITH FRAME•Curved backing plate and frame meet cleanly for a finished look

•For use on any H-D model with the standard 3-bolt mounted license plate bracket

PART # DESCRIPTION SUG. RETAIL2030-0193 Curved license plate frame $59.95

LICENSE PLATE FRAME FOR KÜRYAKYN TURN SIGNAL BAR•Curved license plate frame is designed to mount on Küryakyn’s rear turn signal bar (PART #2040-0421)

•Accepts 4” x 7” license plates

CURVED LICENSE PLATE MOUNT WITH FRAME•Replaces the stock black bracket•Curved look matches the flow of the rear fender

•Requires no drilling to install and uses stock license plate light


RETAIL2030-0265 For 06-11 FLHX

(except FLHXXX) $73.95

PART # DESCRIPTION SUG. RETAIL2030-0198 For 94-08 Road King and Road Glide

models w/o Tour-Pak® $42.95

LAYDOWN LICENSE PLATE HOLDER•Give your bike a sleeker look•Bracket complements the lines of the fender, mounts in the same location as stock

CHROME “WHISKERS” LED LICENSE PLATE FRAMES•Milled 6061 billet aluminum license plate with brilliant chrome plating and even brighter LED lighting

•Frame fits 71/8” x 41/16” plates•Available in three styles: amber LED, red LED and red/amber LED; red/amber LED changes from red to amber when turn signals are activated, making it perfect for supplementary run/turn or brake/turn lighting

•Red LED version can be used as supplementary run/brake/turn lighting if used with Badlands’ Illuminator module

•Chrome mounting hardware sold separately

PART # DESCRIPTION SUG. RETAILBLLPF02 Chrome license plate frame $50.95

CHROME LICENSE PLATE FRAME•Milled from 6061 T-6 1/4” plate aluminum, then ball-milled and chromed for a show-quality finish•Chromed mounting hardware included•Backing plate not included

“WHISKERS” LICENSE PLATE FRAME RETROFIT LED KIT•Replace the halogen lighting in the original “Whiskers” license plate frames with bright LED

•Up to three times brighter than the original halogen lighting

•Same LED strips as used in the new LED “Whiskers” license plate frames

•Available in amber, red or red/amber; red/amber switches from red to amber when turn signal is activated, making it ideal for supplementary running/turn or brake/turn lighting

•Kit includes everything needed to upgrade from halogen to LED


RETAIL2040-0500 Amber $69.952040-0501 Red 69.95


RETAIL2040-0502 Red/amber $89.95

2040-0501

BLHK01

2030-0347

PART # DESCRIPTION SUG. RETAIL2030-0347 Amber LED $159.952030-0348 Red LED 159.952030-0349 Red/amber LED 179.95BLHK01 Mounting hardware kit 11.95

PART # DESCRIPTION SUG. RETAILSWINGARM/WELD-ON SIDE MOUNTS2030-0547 Swingarm mount side-mount license plate tab for

custom applications (installs on lower shock bolt) $100.952030-0548 Weld-on mounting tab for custom applications 106.95LICENSE PLATE BACKING PLATES2030-0540 Chrome 169.952030-0541 Black 169.95

2030-0541

2030-0540

2030-05462030-0543


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1106

LED LICENSE PLATE FRAMES WITH OR WITHOUT INTEGRATED TURN SIGNALS•Die-cast aluminum frame with single- or dual-row LED; also available without LED•Available with or without integrated turn signals; dual-function red LED brake/running lights and single-function amber LED turn signals

•Accepts most 4” x 7” license plates (may require redrilling license plate)•Includes complete instructions and wiring diagram•Available with chrome or black powder-coat finish; chrome version also available with custom design•Optional mounting hardware kits sold separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2030-0000 Sequential red $179.952030-0001 Sequential amber 179.95

PART # DESCRIPTION SUG. RETAIL2030-0002 Non-sequential red $179.952030-0292 Tag light for license plate frame 14.95

LED DIRECTIONAL LICENSE FRAME•Chrome billet aluminum construction•Features amber or red LEDs in standard or sequential design•Fits most 4” x 7” plates•Optional tag light illuminates the license plate; fits inside the frame•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-720175 Ball-milled $50.95

PART # DESCRIPTION SUG. RETAILDS-720195 Smooth $50.95

CUSTOM BILLET LICENSE PLATE FRAMES•Chrome billet aluminum construction•Available in ball-milled or smooth designs•Measure 71/4” L x 41/4” H”•Made in the U.S.A.


RETAILDS-720099 Smooth backing plate $39.95

CHROME LICENSE BACKING PLATE•Chrome billet backing plate available in a smooth design

•Measures 4” x 7”•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILCHROME2030-0380 Dual row LED $106.952030-0377 Single row LED 74.952030-03781 Single row LED w/

custom design 74.95BLACK2030-0381 Dual row LED 106.952030-0379 Single row LED 74.951 Requires chrome acorn mounting

hardware kit.

FRAMES WITH INTEGRATED TURN SIGNALSPART # DESCRIPTION SUG. RETAILCHROME7805-1414 Dual row LED $84.95DS-272364 Single row LED 59.95DS-2723661 Single row LED w/

custom design 59.957805-1416 Standard, no LED 23.95BLACK7805-1415 Dual row LED 84.95DS-272365 Single row LED 59.957805-1417 Standard, no LED 23.951 Requires chrome acorn mounting

hardware kit.

FRAMES WITHOUT TURN SIGNALS

PART # DESCRIPTION SUG. RETAILDS-190036 Chrome $10.95DS-190037 Black 10.952030-0382 Chrome acorn 10.95

OPTIONAL MOUNTING HARDWARE KITS

DS-190036 DS-190037

2030-00002030-0292

DS-720195

DS-720175

7805-1414

DS-272364

DS-272366

7805-1416

7805-1415

DS-272365

7805-1417

2030-0380 2030-0379

2030-0378

2030-0382


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1107

PART # DESCRIPTION SUG. RETAILFOR 86-11 FLT, FLHT, FLHX, FLHR, FLTR2030-0519 Chrome $149.952030-0520 Black 149.95

STEALTH 3 LICENSE FRAMES•Replace stock taillight and turn signal assemblies; perfectly shaped to cover all stock mounting holes

•Feature hidden LED lights to illuminate license plate

•No painting, cutting or welding required

•Available in chrome or gloss black

PART # DESCRIPTION SUG. RETAIL2030-0517 Chrome $149.952030-0518 Black 149.95

STEALTH 2 LICENSE FRAMES•Ideal for frenched license plate boxes or applications that don’t require a backing plate

•Two hidden LEDs in the corners•Includes the frame only; backing plates are not available

•Available with a chrome or black-anodized finish

PART # DESCRIPTION SUG. RETAIL2030-0240 Black $75.952030-0241 Chrome 75.952030-0355 Black diamond edge 88.95

LICENSE PLATE FRAMES•CNC machined from billet aluminum•Accepts most 4” x 7” license plates•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2030-0270 License plate frame $67.95

WARRIOR 1 LICENSE PLATE FRAME•CNC-machined aluminum with a black finish

•Hidden mounting holes for a clean, smooth look•Fits most 4” x 7” license plates•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-720801 Nugget style, chrome $12.95DS-720803 Chain-link style, chrome 14.95DS-720805 Twisted style, chrome 14.95

SPECIALTY LICENSE PLATE FRAMES•Available in chrome•Three unique styles: nugget, chain link, and twisted metal•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-720176 Lighted license plate frame $43.95

LIGHTED LICENSE PLATE FRAME•Features 12 LED lights; can be wired to light continually or only when brakes are applied

•Chrome-plated housing with red lens

•Adds a superb eye-catching look to any bike

PART # DESCRIPTION SUG. RETAIL2030-0141 LED license plate holder $116.95

CHROME LICENSE PLATE HOLDER WITH LED•Die-cast chrome plate with three LED strips

•Top row of LEDs can be used as auxiliary running or brake light; side rows can be used as auxiliary marker lights

•Accommodates 7” W x 4” H to 81/2” W x 43/8” H plates•Outer frame measures 91/8” W x 51/8” H x 3/4” D

NOTE: Not DOT approved.

PART # DESCRIPTION SUG. RETAIL2030-0250 Contours license plate trim $21.95

CONTOURS LICENSE PLATE TRIM•Chrome-plated accent trim for 4” x 7” license plates

•Includes chrome mounting hardware

•Universal fitment

PART # DESCRIPTION SUG. RETAIL2030-0252 Contours LED license plate $69.95

CONTOURS LED LICENSE PLATE HOLDER•Chrome ABS license plate holder with multi-function LED run/brake/turn lights

•Fits standard 4” x 7” license plates

2030-0517

2030-0519

2030-0240

2030-0241

2030-0355

DS-720801

DS-720805

DS-720803


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1108

PART # DESCRIPTION SUG. RETAILDS-270225 Chrome $9.95DS-270226 Gold 15.95

EAGLE LICENSE PLATE FRAMES•Die-cast license plate frames, available in chrome or gold•Three-dimensional eagle emblem centered on top of the frame

PART # DESCRIPTION SUG. RETAILMCA-592 Chrome frame $4.95MC-592-1 Black chrome frame 4.95

LICENSE PLATE FRAMES•Die-cast frame surrounds all 7” x 4” plates•Available in chrome or black chrome•Skin-packed on a display card•Sold each

PART # DESCRIPTION SUG. RETAILDS-193810 For most Harleys (except FXWG, FXDWG, FLSTS,

FXST and FLT); repl. OEM #s 59626-84 and 59983-75 $18.95

REPLACEMENT LICENSE PLATE BRACKET•Chrome replacement license plate bracket•Mounts to most custom fenders and is adjustable to accept almost any license plate

PART # DESCRIPTION SUG. RETAILDS-720156 For 97-08 FLHT, FLHR and FLTR models $29.95

SLANTED LICENSE PLATE BACKING PLATE•Chrome-plated stamped steel•Slotted holes to fit most plates; measures 7” x 5”

•Accepts most license plate frames•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1905-0000 For 91-08 FLT, 86-11 FLST (except FLSTS, FLSTSC,

FLSTSB, FLSTF, 05-11 FLSTN) $59.95

LICENSE PLATE MOUNT•Made of 303 stainless steel•Relocates license plate under taillight•Can be used with or without OEM or aftermarket light bars


PART # DESCRIPTION SUG. RETAIL2030-0420 License backing plate $9.95

LICENSE BACKING PLATE•Heavy-gauge, highly polished stainless steel backing plate for license only

•Reinforces plate, reduces vibration or bending•Greatly improves appearance•Fits 4” x 7” plates•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-270101 Taillight/license plate mount bracket $23.95

LICENSE PLATE/CAT EYE TAILLIGHT MOUNT BRACKET•Allows a cat eye taillight to be flush-mounted along with a license plate, giving a clean, custom look

•Taillight sold separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2030-0389 For 09-10 FLHX $79.95

LICENSE PLATE FRAME•Features a special radius at the base of the frame to hide the OEM rubber plug on fender

•Billet aluminum construction with a chrome finish•Fits most 4” x 7” license plates•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2030-0256 For 97-08 FLT/FLHT $29.95

LICENSE PLATE BAR ELIMINATOR•Allows you to retain the stock saddlebag support brackets when removing the license plate support tube

•Made of 10-gauge steel with a chrome polish•Sold in pairs•Made in the U.S.A.

DS-270225DS-270226

MC-592-1

MCA-592


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1109

MILITARY STICKER PLATES•Made of 16-gauge steel•Has a surface area of 2” x 6” for military base sticker

•PART #s 2030-0242 and 2030-0243 mount on front forks, using the two brake caliper bolts on 00-07 Big Twins and Sportsters

•PART #s 2030-0244 and 2030-0245 mount on frame down tubes•Available with chrome or black powder-coat finish•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 86-11 FLST, 99-03 XL AND 99-11 FXD DYNA0521-0046 Chrome $29.950521-0683 Black 29.95

PYRAMID COVERS•The Pyramid covers the three holes on the rear fender (above the stock or Eliminator taillight) when relocating the license plate mount

•Available in polished chrome-plated aluminum or black construction•Made in the U.S.A.


RETAIL0521-0443 For 97-08 FLHR (except 07 FLHRSE), 98-08 FLTR,

97-08 FLHT (04 FLHTCSE requires antenna relocation) $29.95

REAR BAR ACCENT•Covers up the exposed license plate mounting bosses when the license plate is moved from the rear bar

•Quick, easy way to add a custom touch

PART # DESCRIPTION SUG. RETAIL2030-0094 For 11/8” frames $38.952030-0095 For 11/4” frames 38.952030-0268 For 13/8” frames 51.952030-0269 For 11/2” frames 51.95

NON-REMOVABLE INSPECTION PLATE•Billet aluminum with a chrome finish•Clever design puts the inspection tag over the bolt heads so that it can’t be removed without destroying the tag, making it invalid

•Vertically adjustable to the frame for a parallel fit•Also great for parking permits, beach passes, military passes or any other type of tag


PART # DESCRIPTION SUG. RETAIL2030-0015 Flat style $2.95 (ea.)2030-0016 Wedge style 2.95 (ea.)

LICENSE PLATE MOUNTING GASKETS•Black rubber material•Feature OEM bolt mounting pattern•Sold in packs of five

PART # DESCRIPTION SUG. RETAILCH0620 Inspection sticker plate $2.95

INSPECTION STICKER PLATE•Manufactured from aluminum alloy

•Black vinyl coating to enhance appearance and provide long-lasting wear

•Sold each

PART # DESCRIPTION SUG. RETAIL2030-0242 Caliper mount; chrome $29.952030-0243 Caliper mount; black 29.952030-0244 Down tube mount; chrome 29.952030-0245 Down tube mount; black 29.95

2030-0242 2030-0243 2030-0244 2030-0245


RETAILFOR ALL H-D MODELS WITH STANDARD 3-BOLT FENDER-MOUNTED LICENSE PLATE BRACKET2030-0263 Interchangeable Maltese Cross or Skull emblem cover $32.952030-0264 Tribal cover 21.95

LICENSE PLATE MOUNTING HOLE COVERS•Covers the exposed holes in the fender when the stock license plate bracket is removed

•Completely cover the “footprint” left by the stock mount•Sold each

2030-0263 2030-0264

2030-0015

2030-0016

PART # DESCRIPTION SUG. RETAIL1802-0006 Round tip hole plugs $60.951801-0018 Bullet tip hole plugs 60.95

FRAME TUBE HOLE PLUGS•Fill the holes in the rear frame tubes when you remove the stock license plate bar on Dresser models

•Billet aluminum construction with a chrome finish•Sold in pairs•Made in the U.S.A.

1802-0006 1801-0018

0521-0046

2030-0095

0521-0683


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1110

PART # DESCRIPTION SUG. RETAILSIDE MOUNTDS-270150 Chrome ball-milled $32.95DS-270151 Chrome triple ball-milled 32.95DS-270152 Chrome triple curve ball-milled 32.95DS-270153 Black ball-milled 26.95DS-270154 Black triple ball-milled 26.95DS-270155 Black triple curve ball-milled 26.95CENTER MOUNT7805-9999 Chrome ball-milled 34.952030-0032 Black ball-milled 26.95TEXAS/MARYLAND2030-0200 Chrome ball-milled 32.952030-0267 Black ball-milled 26.95

INSPECTION TAG PLATES•Show-quality designer plates made of 6061 billet aluminum•Side-mount and center-mount plates have 1/2” mounting hole with a 23/4” square for sticker

•Texas/Maryland plate has 1/2” mounting hole with a 31/2” x 23/8” square for those states that have a larger inspection sticker

•Available in chrome or factory black wrinkle finish•Choice of three border designs•Made in the U.S.A.

NOTE: U.S. patent #416,520 and #430,074

PART # DESCRIPTION SUG. RETAILDS-190405 Red $13.95DS-190406 Amber 16.95

LED LICENSE PLATE MOUNTING KITS•Available in red or amber•Can be used as running lights or extra brake lights

•Includes 1/4” bolts, nuts and washers•Sold in 4-pack

PART # DESCRIPTION SUG. RETAIL2030-0383 LED license plate light $23.95

LED LICENSE PLATE LIGHT•Compact and stylish license plate light

•Features black body with white LEDs

•Wire length measures 30cm•Body measures 62mm x 43mm x 21mm

•Thread pitch is 1mm and thread diameter is 9.75mm

PART # DESCRIPTION SUG. RETAIL25-9100 LED license plate mounting bolts $22.95

LED LICENSE PLATE MOUNTING BOLTS•Chrome license plate mounting bolts in a hex shape

•LED light in the center of each bolt; one red and one blue

•LEDs flash; great for wiring to brake lights

PART # DESCRIPTION SUG. RETAIL25-9120 Revolving LED license plate mounting bolts $32.95

REVOLVING LED LICENSE PLATE MOUNTING BOLTS•1” chrome round with revolving LEDs

•Lights are red, green and yellow•Can be wired to brake light circuit

PART # DESCRIPTION SUG. RETAIL25-9140 Skull LED license plate mounting bolts $26.95

SKULL LED LICENSE PLATE MOUNTING BOLTS•Chrome skull license plate bolts

•Feature blue LEDs for lighting up the eyes

PART # DESCRIPTION SUG. RETAILBLACK2030-0534 With white LEDs $16.952030-0536 With white/red LEDs 24.952030-0538 With white/amber LEDs 24.95CHROME2030-0535 With white LEDs 16.952030-0537 With white/red LEDs 24.952030-0539 With white/amber LEDs 24.95

LED LICENSE PLATE BOLTS•Choice of chrome or black bolts in three LED colors

•24” extra-long leads•Include washers, nuts and allen wrench•Sold in pairs

PART # DESCRIPTION SUG. RETAILLP-600 License bolts/nuts, white $.35 (ea.)2030-0010 License bolts/nuts, black .35 (ea.)

NYLON LICENSE PLATE FASTENERS•Will never corrode, rust or loosen•Remove and install with fingers•Sold in bags of 100 bolts and nuts

LP-600 2030-0010

2030-0534 2030-0538

2030-0539

DS-270150 DS-270151 DS-270152

DS-270153 DS-270154

2030-00322030-0267

DS-270155


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 18

1111

PART # DESCRIPTION SUG. RETAILDS-190190 License plate acorn set $6.95

LICENSE PLATE ACORN SET•Each set includes four bolts, complete with custom acorn nuts

•Excellent for mounting license plates onto motorcycles



RETAILCH150A Amber, (150-pk.) $.50 (ea.)CH150B Blue, (150-pk.) .50 (ea.)CH150R Red, (150-pk.) .50 (ea.)DS-272080 Amber, (40-pk.) .50 (ea.)DS-272081 Red, (40-pk.) .50 (ea.)


RETAILDS-272082 Blue, (40-pk.) $.50 (ea.)CH4A Amber, (4-pk.) 2.95 (ea.)CH4B Blue, (4-pk.) 2.95 (ea.)CH4G Green, (4-pk.) 2.95 (ea.)CH4R Red, (4-pk.) 2.95 (ea.)

LICENSE PLATE REFLECTORS•Plastic reflectors commonly used on license plate frames

•Available in 4 pack, small tub of 40 and large tub of 150


PART # DESCRIPTION SUG. RETAILCH-100 License plate fasteners $.50 (ea.)

LICENSE PLATE FASTENERS•License plate bolt assembly is complete with a Phillips head bolt, two washers and a locking hex nut

•Thread size of the bolt is 10-24 x 5/8” L•Available in bag of 100

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXST/FLSTDS-273663 Left side $36.95DS-273664 Right side 36.95

TOOLBOX MOUNTING KITS•Chrome toolbox mounts feature a spacer and longer bolt for spacing the footpeg away from the toolbox

•For the right or left sides; toolboxes must be purchased separately


PART # DESCRIPTION SUG. RETAILDS-273666 For 85-86 FX, FXWG (except FXST) $36.95

TOOLBOX MOUNTING BRACKET•Bolt-on bracket mounts toolbox PART #DS-373655 to left-side passenger peg block

•Stock peg bracket may be turned upside down or relocated to bottom stud


PART # DESCRIPTION SUG. RETAILDS-373655 Right; repl. OEM #64205-40 $65.95DS-373701 Left; repl. OEM #64206-89 65.95

CHROME TEARDROP TOOLBOXES•Beautiful reproductions of the original toolboxes found on the early models

•Available in a chrome finish

PART # DESCRIPTION SUG. RETAILDS-373692 Teardrop toolbox pouch, right $19.95DS-373693 Teardrop toolbox pouch, left 19.95

TEARDROP TOOLBOX POUCHES•Put an end to tools banging around in your teardrop toolbox

•Made from black 1,000-denier Cordura® with a polyurethane coating that offers excellent water resistance

•Zippers are non-rusting and edges are bound to help retain their shape•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1” TO 11/4” MOUNTDS-373493 10” $187.95DS-373495 7” 176.950713-0056 Repl. clamp 66.9511/2” MOUNT3550-0019 10” 187.953550-0020 7” 176.950713-0057 Repl. clamp 66.95

CHROME STASH TUBES•Available in 10” long or 7” short styles•Measure 21/4” in diameter•Open on both ends for easy access•Clamps included for 1” to 11/4” and 11/2” frame tubes

•CNC machined from billet aluminum and chrome plated

•Replacement clamps available separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-373678 For 84-94 FXR $39.95

STASH TRAY•Provides a great place for tools, spark plugs, gloves, etc.

•Durable ABS plastic construction

•Fits snugly under the seat between the frame rails on all models with flip-up seat


DS-373493DS-373495

Replacement clamp

CH4A CH4B CH4G

CH4R

Documents

18 FOOTRESTS & LICENSE PLATE FRAMES (Pédalier, support de plaques)2011