170AL WATER BREAKER NOZZLE

COMMERCIAL SOLUTIONS®

The Dramm Corporation got its start in 1941 when growers commented to florist and inventor, JohnDramm, that they had no good way to water their plants. John's solution was to develop theAluminum 400 Water Breaker® Nozzle, still the standard in hand watering tools across the worldtoday. This spirit of innovation and commitment to a solution continues today at Dramm. Withevery product Dramm produces, the intent is to provide the best solution to our customers. Fromthe beginning, Dramm has focused on technical products that affect plant growth. Each of thesesystems overlap. Combining an expertise in greenhouse systems produces a better overall result.This approach is something we call Integrated Plant Health.

Look for Dramm to continue to offer innovative products. With your input, we are able to developthe next generation of solutions for the needs of the industry.

Dramm Commercial Team

Table of Contents

Integrated Plant Health

Kurt Becker Central US Region 920.645.6417 [email protected]

Russell Blackwell Southeast US Region 251.342.9719 [email protected]

Tim Reusch Western US Region 206.351.4460 [email protected]

Jared Babik Northeast US Region 724.272.7975 [email protected]

Louis Damm Canada 905.892.5644 [email protected]

Andrew Damm Canada/Irrigation Design 905.892.5644 [email protected]

Al Zylstra DRAMMwater 425.583.9416 [email protected]

Les Evans DRAMMwater 919.607.8842 [email protected]

Phil Krcma Service Manager 920.684.0227 [email protected]

2

Watering Tools & Accessories ......................................................................pg 3

ColorStorm™ Premium Rubber Hose ........................................................pg 10

Retail Products ............................................................................................pg 11

Aprons ..........................................................................................................pg 12

DRAMMwater ..............................................................................................pg 13

Irrigation Systems ........................................................................................pg 14

Drammatic™ Liquid Fish Fertilizer ..............................................................pg 28

Environmental Controls ..............................................................................pg 29

Hydraulic Sprayers ......................................................................................pg 30

Chemical Application Equipment ............................................................pg 32

www.dramm.com ORDER: 920.684.0227 FAX: 920.684.4499 3

Watering Tools400AL WATER BREAKER® NOZZLE

* water output measured at

1000PL REDHEAD® NOZZLE- medium

1000PL-W NOZZLE- wide

1000PL-N NOZZLE- narrow

750PL LEMONHEAD® NOZZLE

170AL WATER BREAKER® NOZZLE

operational video available online

use withIn-Line

Hose Filter

use withIn-Line

Hose Filter

use withIn-Line

Hose Filter

use withIn-Line

Hose Filter

Original professionalnozzle. Crafted ofcast aluminum andbrass. Gentle, full flow at 11.1 gpm*

Crafted of cast aluminum andbrass. Narrowpattern for containers/basketsor low pressure systems. Flow at 7gpm*

Softest full flow available. Waterplugs or seedlings.ABS plastic & stain-less steel with over1000 micro-holes.Medium pattern with flow at 8 gpm*

Softest full flow available. Waterplugs or seedlings.ABS plastic & stainlesssteel with over 1000micro-holes. Widerpattern with flow at 8 gpm*

Softest full flowavailable. Waterplugs or seedlings.ABS plastic & stain-less steel with over1000 micro-holes.Narrow pattern. Flow at 8 gpm*

Soft full flow water-ing- great whenother nozzles havetoo much flow. ABSplastic & stainlesssteel with 750 holescreate a softshower at 8 gpm*

Fax: 920.684.4499 ORDER: 920.684.0227 www.dramm.com4

Watering Tools480AL WATER BREAKER® NOZZLE

* water output measured at 40psi

400PL WATER BREAKER® NOZZLE

PLASTIC FAN NOZZLE- commercial


Narrower pattern foredge watering. ABSplastic & stainlesssteel with over 480micro holes. Gentlywaters at 7 gpm*


350PL SCREEN-AIRE™

Narrow pattern foredge watering. Castaluminum & stainlesssteel with over 480micro holes. Gentlywaters at 7 gpm*

use withIn-Line

Hose Filter

use withIn-Line

Hose Filter

use withIn-Line

Hose Filter

Water large, ornursery containerswith increasedspeed. Gentle,concentrated, aerated flow at 18 gpm*

Rectangular shapefor seedling traysand flats. Corrosion-proof head.Medium flow at 5-7 gpm*

Professional’s light-weight alternative tothe 400AL. ABS plas-tic & stainless steel.Gentle, full flow at 11.1 gpm*

Professional’slightweightalternative to170AL. ABS &stainless steel.Narrow pat-tern for con-tainers/bas-kets, or low pressure. Flow at 7 gpm*

F O w www.dramm.com ORDER: 920.684.0227 FAX: 920.684.4499 5

Watering Tools610SF FOGG-IT® NOZZLE- super fine


610L FOGG-IT® NOZZLE- low

510 BRASS SEEDLING® NOZZLE

610F FOGG-IT® NOZZLE- fine

610H FOGG-IT® NOZZLE- high

540 BRASS ROSE

protective rubber guard &

Metric-to-Inch hose

threadconverter


Water beddingplants, pots or market packs. Extra wide sprayincreases hand watering speed with 18-20 gpm*

Water fragile plants,seedlings, or cuttings.Produces an extrafine, hollow “conemist pattern” at 1/2 gpm*

Mist delicateseedlings, raisehumidity around wilt-ing plants. Three mistjets create a conicalpattern at 2 gpm*

Mist delicateseedlings, raisehumidity aroundwilting plants.Three mist jetscreate a conical pattern at 4 gpm*

Mist delicateseedlings, raisehumidity aroundwilting plants.Three mist jetscreate a conical pattern at 1 gpm*

Mist delicateseedlings, raisehumidity around wilt-ing plants. Three mistjets create a conicalpattern at 1/2 gpm*


Watering ToolsONE TOUCH™ HIGH FLOW VALVE


300AL ALUMINUM SHUT-OFF- high flow

35 SHUT-OFF- medium flow

300 BRASS SHUT-OFF- high flow

74 SHUT-OFF- high flow

65 TOUCH ‘N FLOW PRO™- medium flow

Machinedbrass threads

Maximized valve opening15 gpm

Easy slide valve

Fingertip water control. Zinc die-castbody & nylon valve components for longlife. Designed for precision water flow.

The Brass shut-off offers unmatcheddurability and full flow. Designed withreplaceable internal components anda 1/2” ball opening.

Durable trigger style brass & nylon valve.Heavy-gauge wire latch reduces handfatigue, higher flow rate works well with400 Water Breaker™ Nozzle.

The 35 shut-off is lightweight and madeof durable ABS plastic for everyday use.Larger valve opening and higher flowthan comparable valves.

Cast brass handle3/4” Machinedbrass threads

Machined brass threads

Maximized valve opening11 gpm

TPR Rubber molded grip

The Aluminum shut-off offers unmatcheddurability in lightweight, fatigue reducingaluminum. Same internal componentsas the 300 Brass.

Ultra heavy duty, lightweight valve with5/8” ball opening for full water flow.Designed for all day use.

Machined aluminumbody

Cast brass handle3/4” Machinedthreads

Lightweight, high impactABS plastic

Easy-grip handle

.410” Diameteropening

5/8” Ball opening

Large ergonomichandle

Fiber filled polypropylene

Machined brass body

raised handleavailable

UPGRADED


Watering Tools235 TWIN SHUT-OFF- low flow


800 ADJUSTABLE NOZZLE

IN-LINE HOSE FILTER

235B TWIN SHUT-OFF BRASS- low flow

600 LONG BRASS NOZZLE

BRASS HOSE SWIVEL

NEW

Solid brass adjustable nozzle. Traditionalstyling with twist barrel to adjust water fromfan to cone to powerful stream. Greatcleanup nozzle.

Water two places at one time. Durable, light-weight ABS body & handles with 3/4” maleand female hose thread.

Water two places at one time. Heavy dutybrass body & handles with 3/4” male andfemale hose thread.

Solid brass wash nozzle provides a strong,direct flow to clean surfaces. This durablenozzle is made from machined brass, tolast.

Brass body

Removeable filter

6” Long solid brass body

3/4” hose threads

3/4” hose threads

Adjustable barrel

ABS plasticBrass body

Brass handles3/4” Hose thread

Dual water control

EPDM Rubber grip

Machined brass body

Live swivel

EPDM seals

80 Mesh nylon filter eliminates dirt, debris& nozzle clogging. Use with any DrammWater Breaker® nozzle to eliminate clogs.*200 mesh also available

Brass swivel works under pressure & allowshose-end accessories to turn independentlyof hose. Commercial duty for every wateringneed.

80 Mesh nylon

Dual water control


BRASS DISCONNECT

BRASS TWISTY QUICKS™

HOSE PROTECTOR

TWISTY QUICK™

HANDI-REACH™or

HANGING BASKET HANDLE

Watering Tools

Heavy duty brass quick disconnect availableas male, female, or pair (#740). No more turn-ing! Pull collar back to quickly connect or dis-connect accessories. Stopper version available: #743

1/4 Turn Disconnect for use with blunt cuthoses. Makes any threaded hose connectioneasy to couple/uncouple. Forged brass.

Quickly connects between faucet and hoseto save hose ends from stress & strain. Preventshose-end kinking & damage to couplings.

Quick hose connection made of super toughDuPont® nylon. Eliminates the hassle of con-necting and disconnecting hose & hose-endaccessories. Pairs only.

Eliminate stretching & stooping associatedwith hand watering. Compatible with anyDramm nozzle. Multiple lengths available.

#741Male portion

#625- 5/8” ID hose#675- 3/4” ID hose

#775M- 3/4” Male thread#775F- 3/4” Female thread

#742Female portion

retractable collar

Extruded aluminum

90° bend HangingBasket Handle

EPDM Rubber grip

Brass fittings & ferrules

Brass fittings & ferrules

Durable DuPont®Nylon

Lightweight at .08oz.

3/4” Hose thread

Barbed hose fitting

Zinc plated steel

Premium ColorStorm hose

3/4” male & female threadsBrass

• 90° Bend Waters Hard-To-Reach Hanging Baskets Easily• Compatible with 170 Water Breakers for Basket Watering

Professional watering cans with superiordesign & durability. 10 Liter (2 1/2 gal) Swissmade can with elbow. Red or Green.

10" Ringconvenientlyremoves hang-ing basketsfrom above. 8" or 12" Ringsalso available.Basket removerrod availablein 3’, 5’, or 7 ft.

A. 10 liter Rose B. 10 Liter Spout C. 2 Liter RoseD. 7 Liter Rose E. 2 Liter Spout

SWISS WATERING CANS

REPLACEMENT ROSES

HANGING BASKET REMOVER PICK-UP STIX™

U.S.A. 2, 5, & 7 LITER CANS

A

C

BD

E


Watering Tools

Professional watering cans with superiordesign & durability. American made canavailable in Red, Orange, Yellow, Green,Blue and Berry. 2 Liter (1/2 gal), 5 Liter (11/3 gal), 7 Liter (1 3/4 gal).

2 Liter

5 Liter

7 Liter

SYPHONJECT™

Siphon mixerdilutes mixturesat approx. ratioof 20 parts waterto 1 part con-centrated solu-tion. Filledpolypropylenebody, w/backflow preventer,for lightweightdurability.

Stainless steelfilter spring

Externalcheck valve

Jumbotweezers forlitter pick up.AluminumPlated steelw/ComfortGrip

www.dramm.com ORDER: 920.684.0227 FAX: 920.684.4499

Dramm ColorStorm™ Professional Hose delivers the same quality you have come to expect fromDramm watering tools.

Dramm ColorStorm Professional Rubber Hose is made from EPDM rubber for a "crackless" hose coverthat is resistant to abrasion and weathering. This reinforced hose is hexagonal in shape to reducekinking. The design of the hose allows a user to easily pull free any kinks that may occur. Ourhexagonal Sure-Grip™ cover creates a softer surface for a more comfortable grip.

Each hose has crush-proof, nickel plated, brass fittings for an exact fit that will survive years of use.Finally, to enhance visibility, ColorStorm-Professional Rubber Hose is bright yellow to prevent tripping.

5/8” or 3/4” Diameter for full water flow. Available in multiple

lengths with custom lengths available. 130 psi working pressure.

• Durable, Abrasion Resistant Cover• Increased Comfort

• Nickel Plated Brass Couplings• Corrosion Resistant• Crush Proof

• Coils Easily

• Flexible to –25° F

Sure–Grip™ Technology

Bulk Hose

Hose Swivel

Fittings

Make Your Own Lengths

Crush–Poof Fittings

Kink Resistant

Hot Water Resistant to 160°F

Bright Yellow for Visibility

10

Says “Don’t Trip”

ColorStorm Hose

Professional grade rubber soaker hose

available in multiple lengths. Thicker wall

prevents “geyser” effect and promotes

even watering from beginning to end of

hose.

ColorStorm™ Soaker Hose

Dramm Press

with Dramm custom fittingequipment and bulk hose.

w O F 11

Dramm offers the same professional quality products, in retail packaging, for sale in your store. Offeryour customers the same quality you rely on to use in their gardens.

Our products are minimally packaged on unique, easy to assemble and position, mobile displays.Each display combines an assortment of product in a small footprint to maximize your square footsales.

Dramm offers a variety of watering tools, our ColorStorm hose, and a series of cutting tools in anassortment of colors.

60114 Watering Tools 65085 Sprinklers/Hose 60094 Watering Tools

Revolution™Thumb Controlled 9-Pattern Spray Gun

ColorPoint™Pruner

ColorMark™ RainWand™

Garden Apron

400 Water Breaker®

Nozzle

Contact us for a complete Retail Catalog.

Retail Products



Apron

w O F 12

• PVC Mesh Pockets for

Convenience, Durability,Breathability

• Generous Tie Length toEnsure Proper Fit

Carry

Store

• 100% Cotton isLightweight, Breathable& Machine Washable

• Zippered Center Pocket toConveniently empty contents

• Reenforced Pocket toPrevent Wear

Create uniformity and show your colors with Dramm’s ColorWear™ aprons. Our durable canvas apronsare perfect for working in the greenhouse.

ADD YOUR LOGO

Dramm can embroideryour logo onto yourapron. Contact us forquantity and options.

Empty

w O F

DRAMMwater


Increase dissolved oxygen while protecting your plants and keeping your water clean.Dramm can design a complete water treatment solution; from the source to the plants. Aproperly designed system can increase production, reduce shrink, prevent pathogens andimprove plant health.

Healthy water is paramount to plant growth. By improving the health of your water, you can improve thehealth of your plants. DRAMMwater was established to not only clean your water, but to make it healthier.Clean water can protect your plants and equipment. Healthy water can increase production and reduceshrink.

DRAMMwater™ provides complete solutions including pond aeration, deep media and other filtration, ozone,bio-remediation, water storage, water pumping and recirculating systems. By combining our more than 70years of experience with technology from a number of vendor-partners, DRAMMwater is able to improve thehealth of any water.

Talk with our water treatment specialists to develop a comprehensive plan for your facility.

Dramm PolyRail™ Bench Risers combine the ease of instal-lation of our PolyRail and our JetRain™ or JetFog™ nozzlesto mist or irrigate rolling benches. A typical problem withmisting rolling benches is that nozzles are fixed to the struc-ture. As the benches roll, the plants move in relation to themist system, causing poor coverage. With our PolyRailBench Risers, the mist system is fixed to the bench, ensuringthat the proper coverage is matched to the plants, evenwhen the bench moves. Available in different heights.

• Fixes Nozzles to Rolling Benches

• Easy to Install

• Available in Different Heights

• Sold as Complete Kit

A key component of our unique distribution system is theDramm PolyRail™. PolyRail is a lightweight aluminumextrusion used for supporting irrigation polyethylene tub-ing. Dramm PolyRail is incredibly strong due to thepatented I–Beam construction. The I–Beam “Rail” addsstrength as well as a point for connecting the PolyRail toone of the many hanging or connection pieces availablewith the system.

Dramm PolyRail™ is easy to install. Unlike “C” channel alu-minum extrusions where the PE tubing must be pulledthrough the extrusion, installing PE tubing is a snap. Simplypush the PE tubing into the opening and it securely snapsinto place.

Dramm PolyRail can be hung easily providing a rigid, per-fectly straight line for your nozzles. With no twisting or sag-ging, your nozzles and your irrigation pattern remain leveland even. PolyRail perfects your irrigation system.

Use the PolyRail with our barbed JetFog™ or JetRain™nozzles and even or barbed PCAS drippers for the per-fect system.

Dramm has been the leader in watering your plants since 1941. Traditionally, Dramm has offered irrigationsystem components to water your plants. Now Dramm not only offers the individual components but theexpertise to ensure it is designed correctly and the fittings, pipe and components necessary to do the jobright.Building on years of experience, Dramm has perfected several distribution systems that complete the sys-tem. Each Dramm distribution system combines unique features with specific fittings and componentsand knowledge of irrigation best management practice to create the perfect system.Let Dramm help you design the perfect irrigation system.

DRAMM POLYRAIL™

DRAMM POLYRAIL™ BENCH RISER

Top Hanger

PolyRail™

90° Hanger

ConnectingBand

UprightHanger

JetRain™Nozzle


Let Dramm Design Your System – Online Form Available

Irrigation Systems

• Patented Aluminum Extrusion Supports PE Tubing• Easy to Install• Keeps PE Lines Cool• Eliminates Sagging of PE Lines• Can be Hung a Variety of Ways• Specialized Punch Tool Centers Holes Perfectly

POLYRAIL™Item #: ALU16 – 16 mmPE Tube Diameter: High density 16mmPE Tube Diameter: High density 25mmstandard length: 12 ft

Item #: ALU25 – 25 mm

• Easy Connection for Hanging PolyRail

• Top Rail Used to Hang Rail with Opening Downward

• 90* Positions Opening at Side

• Upright Hanger

HANGERSItem #: ALU500PH 90* HangerItem #: Item #: ALU502H Top Rail

• Connects PolyRail Together

• Use When Extra Support is Required or to Cover Open Spaces in PE Tubing

14” CONNECTING BANDItem #: ALU 50135

• Connects PolyRail Together

• Slides on Rail

• Set Screws Provide Secure Connection

CONNECTING BANDItem #: ALU 501CB

• Use at End of Line

• Prevents Hangers from Slipping Off Rail

STOPItem #: ALU 541S

• Fixes Irrigation System to Bench

• Perfect for Rolling Benches

• Different Heights Available

POLYRAIL BENCH RISER- cap/base/tubeItem #: ALUS baseItem #: _ _ CUTTUBE specify 24, 36, or 48”

Item #: ALUSC cap


Irrigation Systems

Fax: 920.684.4499 ORDER: 920.684.0227 www.dramm.com

Use the White and Blue JetRain nozzles for evenmisting. Both the White and Blue JetRain nozzleshave the same flow rate. However, they have aslightly different rise in the spray pattern. Theresult is less collision at the mid–point betweennozzles when these nozzles are alternated in aninstallation.

Use the Red and Yellow JetRain nozzles for heav-ier irrigation. With larger coverage areas andspacing, the Red and Yellow JetRain nozzles areperfect for watering flats, pots, and even largecontainers.

DRAMM JetRain™ NOZZLE

Dramm JetRain nozzles offer a variety of optionsfor misting and irrigating your plants. These pin–style nozzles offer unmatched evenness of cover-age. With multiple configurations, ,the JetRain™nozzles can work with low or high pressure sys-tems, be rigidly mounted in PVC or galvanizedpipe or barb fitted into flexible PE tubing.Combine the JetRain nozzles with DrammPolyRail™ for an easy install system that remainsrigid.

There are four JetRain nozzles to choose from:White, Blue, Red and Yellow. Each has a differentflow rate and width of pattern.

• Unmatched, Even Coverage• Easy to Install• Variety of Patterns• Variety of Installation Options

16


Irrigation Systems



• Hangs Below Baskets

• Perfect for Overhead Irrigation or Propagation

• Uses JetRain Nozzles

• Variable Lengths Available– 36”, 43”, or 60”

• Four Different Patterns and Flow Rates

• Five Different Flow Rates– specify color• Propagation & Overhead Irrigation• Operates Between 15 – 50 psi

HANGING NOZZLE ASSEMBLYvariable lengths availableItem #: HNA– -_ _ (color)

ALUMINUM BENCH RISER

• Four Different Patterns and Flow Rates (see below)• Nozzles for Propagation or Overhead Irrigation• Operates Between 15 – 50 psi• Press Fit Check Valve• Pressure Compensated• Barbed or 3/8"WW Threaded Connection• Use Alone or Combine with Risers or Hangers

JetRain™ NOZZLE

180° JetRain™ NOZZLE

see below chart for output rate


specs: Barbed JetRainItem #: JRLPC-B– _ _ (specify color)

specs: Threaded JetRain

individual components available–consult commercial price list

Item #: JRLPC-T– _ _ (specify color)


specs: Barbed 180 JetRainItem #: JRLPC180-B– _ _ (specify color)

specs: Threaded 180 JetRain

individual components available–consult commercial price list

Item #: JRLPC180-T– _ _ (specify color)

• Mounts Easily on Expanded Metal Benching• Alternating Heights (15" & 20") for Best Coverage• Use with JetRain Nozzles• Complete Assembly, Ready to Install• Aluminum Construction• Perfect for Rolling Benches

Item#: ALBR-20-JR-(specify color)Item#: ALBR-15-JR-(specify color)

Nozzle Color Application Flow Rate Spacing Height Above Crop at 15 – 50 psi Upright Inverted Coverage

Blue Prop/Mist .48 gpm / 1.8L/min 24” – 40” 15” – 36” 30” – 48” 7’ max

White Prop/Mist .48 gpm / 1.8L/min 24” – 40” 15” – 36” 30” – 48” 7’ max

Red Fine Water .79 gpm / 3.0L/min 48” – 72” n/a 48” – 96” 11’ max

Yellow Watering 1.37 gpm / 5.2L/min 48” – 72” n/a 48” – 96” 18’ max

Irrigation Systems

JetFog nozzles are available in either a single out-let or a 4/5 way outlet. The single nozzles are per-fect for cooling or humidity systems, while the mul-tiple outlet nozzles are better for propagation.

When used for propagation, the JetFog nozzlesadd humidity to the air without too much mois-ture accumulating on the plants.

DRAMM JETFOG ™ NOZZLE

Dramm JetFog™ nozzles produce a fine fog (80µ)at pressures between 50 – 60 psi. This fog can beused for evaporative cooling as well as humidity oreven propagation mist.

Like the JetRain™ nozzles, Dramm JetFog nozzlesare either barbed or threaded allowing for a vari-ety of installation options. When used with DrammPolyRail™, JetFog nozzles make an easy to installmist system for cooling or humidity. Combine thissystem with the Dramm MistTime™ for the perfectcooling or misting system.

• Fine 80µ Fog• Perfect for Cooling or Humidity• Easy to Install• Variety of Installation Options



Irrigation Systems

• Use for Propagation or Cooling

• Available Barbed or 3/8” ww Threaded Connection

• 4 or 5 Outlets Available (specify)

• Silicone Diaphragm

JETFOG™ 4–WAY or 5–Way

JETFOG™ for Propagation

Item #: JFS-B4 (Barbed)Flow Rate: 23.2 lph

Item #: JFS-T4 (Threaded)

Item #: JFS-B5 (Barbed)Flow Rate: 29 lph Operating Pressure: 50 - 60 psi

Item #: JFS-T5 (Threaded)

• Low Pressure Fog Nozzle• Great for Cooling and Humidification• 80µ Particle Size for Fine Fog• Operates Between 50 and 60 psi• Barbed or 3/8"WW Threaded Connection• Built-in Check Valve• Pressure Compensated• Silicone Diaphragm

JETFOG™ NOZZLEItem#: JFS-B Barbed

Spacing:variable to conditions & use

Item#: JFS-T Threaded

Flow Rate: 5.8 lph

Operating Pressure: 50 - 60 psi


Irrigation Systems


Our single basket drippers utilize our patentedzinc–aluminum weight to keep the dripper in thepot. This unique weight won’t catch on yourplant or basket hanger at harvest.

Using chemical resistant silicone to regulate theflow, our PCAS drippers will last for years withoutdamage from injected acid and fertilizers in yourwater. Additionally, our silicone diaphragm allowsfor a greater range of pressure compensation.Dramm PCAS drippers operate between 15 and60 psi often eliminating the need for pressure reg-ulators.

DRAMM PRESSURE COMPENSATED DRIP SYSTEM

• Every Plant Gets the Same Amount of Water

• Slim Weight Won’t Catch on Baskets, Easy– to–Harvest

• Silicone Diaphragm Lasts Longer than Rubber

• Greater Range of Pressure Compensation 15–60 psi

Dramm PCAS Drippers evenly water your plants.Drip irrigation eliminates moisture on the leavesreducing disease pressure. Our PCAS drippers areperfect for any hanging basket or pot irrigationsystem. Dramm Pressure Compensated Drippersare available as a single basket dripper or as amulti–outlet dripper for pot watering.



Irrigation Systems


PCAS EMITTER

PCAS LOW FLOW WEIGHT- PCAS–WItem #: PCAS-W

• Pressure Compensated• Two Different Flow Rates Available• Silicone Diaphragm for Longer Life• Double Cone Lock Barb for Secure Fit• Three Entry Points into Labyrinth Prevent Clogs• Use with 2 & 4–Way Manifolds & Labyrinth Stakes for Multi–Outlet Use

PCAS EMITTER BARRELItem #: PCAS 8L– 8 lph (2 gph)Item #: PCAS 4L– 4 lph (1 gph)

STAKESItem #: LST4-45 Item #: ST-45 Barb Stake

Item #: LST-45

MULTI–OUTLET MANIFOLDSItem #: MAN2 2 outletsItem #: MAN4 4 outlets

Item #: MAN1 1 outlet adpt

• Labyrinth Stake for Multi Outlet Systems• Available Without Labyrinth for Single Emitter to Container

• 45˚ Angle Connection• Barbed Connection for Secure Fit

• 1, 2 or 4 Way Output• Fits PCAS with Barrel Style Outlet• Low Profile Prevents Breakage• Durable Construction and Design

• Barbed Connection for Secure Fit• Slim Design for Easy Placement and Harvesting• Zinc/Aluminum Alloy - No Lead• Dual Port for Even Output• Compatible with Other Systems• Patented Design

• Pressure Compensated Emitter• Silicone Diaphragm for Longer Life• Double Cone Lock Barb for Secure Fit• Three Entry Points into Labyrinth Prevent Clogs• Use with PCAS Weight (individual) or Stake• Two Different Flow Rates Available• Larger Body & Larger Labyrinth for Less Clogging

Item#: PCAS4L- 4lph (1 gph)Operating Pressure: 15 - 60 psi

Item#: PCAS2L- 2lph (0.5 gph)

complete basket assembly


Irrigation Systems

Specs: 6 Outlet Manifold Item #: MMV-6 (6 outlet only)

Specs: 12 Outlet Manifold with

Item#: MMV-12 (12 outlet only)

• Pre-engineered Solution to Drip Irrigation Headers• Includes all Fittings and Connections• Includes Hand Valve, 150 Mesh Filter & Pressure Regulator• Optional Solenoid Valve• Easy to Install– Just Connect Supply Line and PE Lines• Provides Easy Access to Individual Line Valves• Easy to Maintain– Union Allows Access to Threaded Components

VALVE TREE MANIFOLD

• Re-Engineered Solution to Field Crop Drip Headers

• Includes all Fittings and Connections• Easy to Install– Just Connect Supply Line and PE Lines

• Available with Unique Metered Flow Valve• No Power Required• Available in 6 and 12 Outlet Model

MUM MANIFOLDS



Irrigation Systems

• 3/4” Pressure Adjustment Range 7 – 85 PSI• Pressure Indicating Springs YEL 7-20 PSI, WHT 12-35 PSI, RD 28 -60PSI, BLK 50-85PSI

• Max Inlet Pressure 125 PSI

• 1” Pressure Adjustment Range 7 – 80 PSI• Pressure Indicating Springs WHT 7-18 PSI, RD 14-28 PSI, BLK 20-50 PSI, NAT 40-80 PSI


• 1.5” Pressure Adjustment Range 7 – 80 PSI• Pressure Indicating Springs WHT 7-18 PSI, RD 14-28 PSI, BLK 20-50 PSI, NAT 40-80 PSI


PRESSURE REGULATORItem #: PRV-075-P05 3/4” Dir. ActSpec: Direct Acting Regulator, Low Flow

Item #: PRV-075-P 3/4” Direct Acting

Item #: PRV-100-M Spec: Direct Act. Reg. & Shut-Off Valve

Item #: PRV-100 1” Direct Acting

Item #: PRV-150R 1.5” Direct Acting Reg.

• Delivers a Pre-Set Quantity of Water Before Shutting Off

• Select Variable Quantities of Water by Turning the Dial

• Available in 300 Gallon Maximum Quantities• No Power Required– Perfect for Outdoor Use• Available in 1" NPT

METERED VALVEMax Output: 300 gal max outputItem#: MTA300 0.5 – 9 gpm

PRESSURE REGULATOR VALVESpecs: 1.5” Pres. Reduce w/Flow ControlItem #: SVB200-NP55M Specs: 2” Pres. Reduce w/Flow Control

Item #: SVB150-NP55M

• Fast Acting Valve– Great for Misting Systems• Extremely High Flow Rate with Low Head Loss• Operates at Very Low Flow Rates• Available with or without Flow Control• Manual Override for Easy Operation• Available in 3/4" and 1" Models• Heat Tolerant to 80°C (176°F)

PROFESSIONAL SOLENOID VALVESItem #: SVB075-M - 3/4” w/flow controlItem #: SVB075 - 3/4” no flow control

Item #: SVB100 - 1” no flow controlItem #: SVB100-M - 1” w/flow controlItem #: SVB150-M - 1.5” w/flow controlItem #: SVB200-M - 2” w/flow controlPower Requirements: 24v AC 1.7 wattsOperating Pressure: 10 – 150 psi


Irrigation Systems


• Accurately Maintains Constant Pre-Set Downstream Pressure Regardless of Changing Upstream Pressure or Flow

• Adjustable Ranges 7 – 85 PSI• Manual Override

KWIK KLAMP • Easy Installation & Removal of Pipelines• Hinged Clip Locks Shut when Closed on Larger Sizes• Opens to Remove or Replace Pipelines• Chemical Resistant Polypropylene• Use with Kwik Spacer (B) to Stack or Raise Clamp• Multiple Sizes Available: 1/2” - 4”B

Dramm offers all the components necessary toplumb an irrigation system. Components includeeasyloc fittings, barbed fittings, elbows, tees, in–line valves, threaded adapters and end closures.

•see price list for complete selection

FITTINGS

MIRACLE PUNCH• Adjustable: Supports PE Sizes from 16mm to 1.25"

• Easy, One Hand Operation

• Centers Hole Without Flattening PE Tubing

• 3mm Blade fits All Barbed Dramm Products

Item #: ML-AMP-3

DRAMM QUICK PUNCH• Centers Hole Without Flattening PE Tubing

• Easy, One Hand Operation

• 3mm Blade Fits All Barbed Dramm Products

• Available in Different Sizes

Tubing Size: 16mm & 1/2” PE tubingItem #: PUNCH1650

Tubing Size: 3/4” & 1” PE tubingItem #: PUNCH75100

• Reduce Pressure to Compensated Systems• 40 psi Standard• Other Pressures Available from 10 - 40 psi• Variety of Pipe Sizes

PRESSURE REGULATOROperating Pressure: 40 PSI Item#: PR075M40 - 3/4” pipe thread

Item#: PR100M40 - 1” pipe threadOperating Pressure: 40 PSI Item#: PR125X1H40 -1.25” pipe threadOperating Pressure: 40 PSI (high flow)

• Protects Irrigation Systems From Clogging• Screen and Disc Filters Available• 150 Mesh Standard, 200 and 300 Mesh Available• Variety of Pipe Sizes

For sizes and flow rates see our price listor individual product card

FILTERS


Let Dramm Design Your System

Irrigation Systems

PART CAP ORIFICE 15 22 29 36 # COLOR DIAMETER PSI PSI PSI PSI

PPN-BR Brown 2.55 mm 0.61 0.74 0.85 0.95

PPN-GN Green 2.65 mm 0.69 0.82 0.95 1.08

PPN-GR Grey 2.75 mm 0.77 0.90 1.03 1.17

PPN-BL Blue 2.80 mm 0.79 0.95 1.11 1.27

PPN-RDRed 2.95 mm 0.87 1.03 1.21 1.40

PPN-OROrange3.05 mm 0.90 1.11 1.29 1.48

360NN-BR Brown1.75 mm 0.29 0.35 0.41 0.46

360NN-GN Green2.00 mm0.40 0.49 0.57 0.63

360NN-GR Grey2.25 mm 0.51 0.62 0.72 0.80

360NN-BL Blue 2.50 mm 0.63 0.77 0.89 0.99

360NN-RD Red 2.75 mm 0.76 0.93 1.07 1.20

360NN-OR Orange 3.00 mm0.90 1.10 1.28 1.48

PPN-BK Black 3.25 mm 0.98 1.21 1.40 1.60

PIN-PERFECT NOZZLE FLOW RATE IN GPM

PART ORIFICE 15 22 29 36 # COLOR DIAMETER PSI PSI PSI PSI

TDN Brown/Red1.75 mm 0.29 0.35 0.41 0.46

T-DROP NOZZLE FLOW RATE IN GPM


HP-GW Grey/White 0.75 mm0.12 0.19 0.24 0.27

HIGH PRESSURE MISTY MIST FLOW RATE GPM

PART ORIFICE 36 73 # COLOR DIAMETER PSI PSI

MM-BW Blue/White 1.00mm 0.17 0.22

MM-RW Red/White 1.25mm 0.27 0.35

MM-KW Black/White 1.50mm 0.39 0.50

MIST NOZZLE FLOW RATE IN GPM


NIFTY NOZZLE FLOW RATE IN GPM

PIN-PERFECT NOZZLE• Overhead Watering Nozzle• Designed for Foliage, Bedding Plants, & 4-6” pots• Easy “ON-OFF” Push Pin• 10’ Diameter Spray Pattern• 3’ Spacing• Topside of Pipeline, or Riser Installation• Use with Dramm Run-Out Valves, No-Drip Risers, & No-Drip Extension Check Valves

360° NIFTY NOZZLE• Overhead or On-Bench Watering Nozzle• Designed for Foliage, Bedding Plants, & 4-6” pots• 10’ Diameter Spray Pattern• 3’ Spacing• Top or Bottom of Pipeline, or Riser Installation• Use with Dramm Run-Out Valves, No-Drip Risers, & No-Drip Extension Check Valves

360° MISTY MIST NOZZLE• Overhead Mist Propagation,Irrigate Plugs, Raise Humidity

• Low to Medium Flow Rate• 6’ Diameter Spray Pattern• 3’ Spacing• Top or Bottom of Pipeline, or Riser Installation• Use with Dramm Run-Out Valves, No-Drip Risers, & No-Drip Extension Check Valves

T-DROP NOZZLE• Long Narrow Installations• 10’ X 5” Elliptical Spray Pattern• Top or Bottom of Pipeline, or Riser Installation• Use with Dramm Run-Out Valves, No-Drip Risers, & No-Drip Extension Check Valves

* For a complete list of Irrigation Nozzles, see the current Dramm Commercial/Greenhouse price list *

ASSEMBLY INSERT• Threaded Gasket for Quick, Easy Installation• Leak-Free Seal on Dramm Irrigation Nozzles• Drill 7/16” Hole & Insert• Interior Female 3/8” Witworth Thread• Use at Pressures Up To 50 PSI


Irrigation Systems

• Waters 5”, 6” or 7” Pots Evenly• Water Flow From 2 Holes• Lengths from 12” - 42” Long

DRIBBLE TUBES• Waters Nursery Stock Evenly• Ring Secures Around Trunk, Water Flows from Multiple Holes

• Variety of Sizes and Leader Tube Lengths

DRIBBLE RINGS

DRAMM HANDPIK ™TOOL• Assembly Insert of Brass Eyelets in Poly Tubing for Dramm Dribble Tubes & Rings

• One Leak-Free Operation!

• Pressure Compensated for Superior Accuracy• 2 gph Flow Rate (8lph)• Waters Nursery Stock Evenly• Ring Secures Around Trunk, Water Flows From Multiple Holes

• Variety of Sizes and Leader Tube Lengths

PRESSURE COMPENSATED DRIBBLE RINGS

DRAMM STIX™

NO-DRIP RISER

• Controls Drip From Overhead Pipelines• Elevates Nozzle 2.25” Above PVC Pipeline

• Elevates Nozzles Above Soil for Landscape Use

NO-DRIP EXTENSION CHECK VALVE• Controls Drip From Overhead Pipelines• Shuts Off Water Under 11 PSI- Opens at 11 PSI

• Use When Installing Nozzles in Bottom Side of Pipeline

• Built-In Filter

RUN-OUT VALVE• Controls Drip From Overhead Pipelines• Installs at End of 1” or 3/4” PVC Pipelines• Allows Line to Drain When Water is Off• Requires at Least 15 PSI to Work Properly

PIPE ADAPTER• Direct PVC Pipe Installations• Attach Nozzles Directly to 1/2” PVC Risers• Available Threaded or Slip Fit• Eliminates Overhead Lines• 1/2” X 3/8” WW


Let Dramm Design Your System

Irrigation Systems

• Water or Mist from Overhead when Overhead Lines are Impossible• Great for Moveable Benching• Five Different Heights: 10” - 36” • Includes Poly Tubing, Stix™, & Pin Perfect Nozzles

• 9 Volt Battery Operated Single Valve

• Includes Valve

• Three Modes: Single Start, Start on Select Days,Up to Three Start Times/Day

• Watertight enclosure

• Great for landscaping, outdoor crops ortemporary irrigation systems

• Misting version available

AUTOVALVE™/MIST AUTOVALVE™Item #: GV100 - 1” Item #: GV075 - 3/4”

• Flexible Irrigation Controller

• 3-Valve Base Unit- Add up to 11 Outputs for a total of 15

• Four Start Times

• Water-Tight Enclosure

• Water Budget Feature

• Rain Sensor Available

RAINPRO™Item #: RPIC-07 (7-valve)ΩItem #: RPIC-03 (3-valve)

Item #: RPIC-15 (15-valve)Item #: RPIC-11 (11-valve)

Power Output: 24 vacPower Source: 120 vac

Power Source: 9v batteryBattery Life: up to 1 yearItem #: GVM075 - 3/4” Item #: GVM100 - 1”

MIST TIME™• Precision 10-Valve Misting Controller• Temperature Input• Pump Output Option• Easy-to-Read Display• Easy-to-Use Controls• English, Spanish, French or Dutch programming• Temperature Sensor Sold SeparatelyBuild a misting curve to change the cycle throughout the day

Power Supply: 120v ACEnclosure: NEMA 4 rated PVC

Power Output: 24v ACOverload Protection: fuse


Irrigation SystemsREDESIGNED

DRAMMATIC® “O” • OMRI Listed• Organic or Conventional Crops

• Naturally Complete Plant Food

• Liquid Fish

• 1 gal, 5 gal. • Analysis 2-5-1

• 55 gal, or 275 gal Totes • Analysis 2-5-0.2

for complete information,request product literature:

920.684.0227or visit our website:www.fishfertilizer.com

Dramm Corporation offers a biologically active fish fertilizer. Drammatic® Fish Fertilizer feeds plantswith macro and micro nutrients, as well as the beneficial micro-organisms. We offer our fertilizer in sev-eral blends to meet the exact needs of the grower. For organic or conventional crops.

DRAMMATIC® “K” • OMRI Listed• Organic or Conventional Crops


• Liquid Fish & Kelp

• 1 gal, 5 gal. • Analysis 2-5-1


DRAMMATIC® “ONE” • OMRI Listed• Organic or Conventional Crops


• Blend of Liquid Fish, Kelp, & Fulvic Acid• Alganic Nitrogen Plus 15-0-2 • 1 gal, 5 gal. • Analysis 4-4-1


100% PureLiquid Fish Protein

Hydrolysate

Fresh Fish &Fish Scraps

Fresh FishGround Daily

UniqueNatural EnzymaticLiquifying Technique

Fax: 920.684.4499 ORDER: 920.684.0227 www.dramm.com

200 MeshFine Filtered

28

Natural Fertilizer Environmental Control

• Highly Efficient, Aerodynamic Fans• Reduced Number of Fans Needed• Reduce Energy Costs• Speed Regulation• Anti–Corrosion Design• Low Maintenance

• Precise Control of Variable Speed Fans,Electrical Heating, Bulb or Tube Lights,Cooling Systems & Other Electrical

• Regulates Voltage to Device• Plastic Housing Protects from Environment• Manual or Interface w/Other Control Systems• 4 Different Sizes Available

AME HAF FAN

THERMOSTATS

VARIABLE SPEED CONTROLLERPower Supply: 208/240VEnclosure: plastic PVC IP54

Frequency: 60 HzPower Tolerance: +/- 10%Protection Fuses: primary/secondaryMaximum Voltage:adj. from 230-150 VoltMinimum Voltage: adj. from 0-230 VoltInput Signal: 4-20 AMP or 2-10 Volt DCAlarm Output: relay SPDT no load

Frequency: 60 HzPower Supply: 208/240V

Overload Protection: thermal contact

• Precisely Controls Heating, Cooling, & Ventilation

• Unmatched Accuracy• Construction Eliminates Corrosion• Single or Two-Stage Available• Designed for Harsh Greenhouse Environments

Power Supply: 12V - 240VEnclosure: plastic PVC IP54

Temp. Accuracy: approximately 1° CTemp. Range: 30-104° F (0-40°C)Contacts: 1 or 2 no load SPDTInductive Load: 8 AmpNon-inductive Load: 16 AmpSensor: 1 or 2 Stainless Steel Coils

Dramm offers specialized products for influencing the greenhouse environment. Each product in thiscategory represents the next generation of technology. Dramm Mechanical Thermostats are designedfor the rough greenhouse environment. Utilizing stainless steel coils and corrosion free housing, thesethermostats offer unmatched accuracy and durability. The Dramm AME Horizontal Air Flow System isthe next step in greenhouse air movement. Utilizing fewer, more aerodynamic fans, the AME Systemcreates better, less turbulent air movement with less energy.


Environmental Control


• contact Dramm for a custom layout for your greenhouse •


Hydraulic Sprayers• High Volume Hydraulic Sprayer

• 50 Gallon Tank on Mobile Cart

• Applies Most Chemical Formulations

• Variety of Droplet Sizes & Spray Distances

• 115 Volts or 220 Volts 60 HZ

• 250’ 3/8” Hose Option

• BIGFOOT™ Option Available

Chemical Tank Volume: 50 gallonsModel: HYDRA

Chemical Output Rate:up to 3.8gpmMaximum Pressure: up to 500 psiPump HP: 1.5 hp electric

System Rated Load: 18 or 9 ampHose Length: 150’, 200’ or 250’Dimensions: 27” wide

Shipping Weight: 315 lbs

• High Volume Hydraulic Sprayer

• 50 Gallon Tank on Self Tracking Cart


• Variety of Droplet Sizes & Spray Distances

• 115 Volts or 220 Volts 60 HZ or

• 5.5 hp Honda Gas Engine

Chemical Tank Volume: 50 gallonsModel: HYDRA-ST50 or HYDRAG-ST50

Maximum Pressure: up to 500 psiPump HP: 1.5 hp electric - 3.8 GPM

5.5 Honda® gas - 7.6 GPM

Hose Length: 150’, 200’ or 250’Dimensions: 34” wide

Shipping Weight: 400 or 408 (gas) lbs

• Hydraulic Sprayer

• 100 Gallon Tank on Self Tracking Cart


• Single or Dual Hose Reel Option

• Remote wind Reel Available

Chemical Tank Volume: 100 gallonsModel: HYDRA–ST100

Chemical Output Rate: up to 7 gpmMaximum Pressure: up to 500 psiPump HP: 5.5 hp Honda® gas Hose Length: 150’, 200’, 250’ or 300’Hose Option: 1 or 2 reel availableDimensions: 38” wide

HYDRA™

HYDRA SPRAYTRAX 50- electric or gas

HYDRA™ SPRAYTRAX™ 100

• High Volume Hydraulic Sprayer

• Applies most chemical formulations

• Variety of droplet sizes & spray distances

• Optional extra 20gal tank for smaller areas

• Remote wind Reel Available

Chemical Tank Volume: 200 gallonsModel: HYDRA-200

Chemical Output Rate: up to 7 gpmMaximum Pressure: up to 550 psiPump HP: 5.5 hp Honda® gas Hose Length: 150’, 200’, 250’ or 300’Hose Option: 1 or 2 reel availableDimensions: 60”w x 62” h x 77” L

HYDRA™ 200


• Multi-Purpose Hydraulic Sprayer


• Corrosion–Resistant Pump

• 120 Volts 60HZ

• Multi-Purpose Hydraulic Sprayer

• Multi–Position Reel Placement


• Corrosion–Resistant Pump

• 120 Volts 60HZ


Chemical Tank Volume: not includedModel: MSO

Chemical Output Rate:up to 0.5gpmMaximum Pressure: up to 500 psiCompressor HP: 1/4 hp electricDrive System: direct driveCord Length: 8 ftSpray Distance: stream: 20’•mist: 10’Shipping Weight: 28 lbs

Chemical Tank Volume: 20 gallonModel: MS20-33 or MS20-100

Chemical Output Rate: up to 0.5gpmMaximum Pressure: up to 500 psiCompressor HP: 1/4 hp electricDrive System: direct driveHose Length: 33 ft or 100 ft (MS20-100)Dimensions: 20.5” wide x 36.5” LShipping Weight: 97 lbs

Chemical Tank Volume: 20 gallonModel: MS20GAS-66

Chemical Output Rate: up to 1.8gpmMaximum Pressure: up to 350 psiCompressor HP: 1/2 hp gasDrive System: direct drive w/clutchDischarge Hose Length: 66’ Dimensions: 20.5” wideShipping Weight: 97 lbs

• Gasoline Power Hydraulic Sprayer


• 3 Different Regulator Settings

• Gasoline Engine

Chemical Tank Volume: not includedModel: MSO-GAS#2

Chemical Output Rate: up to 1.8gpmMaximum Pressure: up to 350 psiCompressor HP: 1/2 hp Honda gasDrive System: direct drive w/clutchDischarge Hose Length: 66’ Spray Distance: stream: 20’•mist: 10’Shipping Weight: 30 lbs

MSO SPRAYER

MS20 SPRAYER

MSO-GAS SPRAYER

MS20-GAS SPRAYER• Gasoline Power Hydraulic Sprayer

• 20 Gallon Tank on Mobile Cart


• 3 Different Regulator Settings

• 4-Cycle Honda Gasoline Engine


BIGFOOT

Hydraulic Sprayers



Chemical ApplicationChemical Application• Lightweight, Portable Sprayer• Low Volume & Ultra Low Volume• Applies Most Chemical Formulations• Treat Crops, Control Pests, Administer Vaccines

• Electrically Powered; No Pumping

Chemical Tank Volume: 1 literModel: TEF Turbair Electrafan

Chemical Output Rate: 1- 3.6 oz/minDroplet Size: 60-80µArea Covered: up to 3,000 sq ft/literCoverage Distance: 10 – 20 ftPower Supply: 12 volt DC Shipping Weight: 15 lbs

• Lightweight, Portable Sprayer

• Low Volume & Ultra Low Volume


• Use in Areas with Natural Air Movement

• Outdoor Row Crops or Flowers

Chemical Tank Volume: 1 literModel: ULVA+

Chemical Output Rate: 25 - 60ml/minPower Supply: up to 8 -D cell batteriesDroplet Size: 50-60µShipping Weight: 5 lbs

TURBAIR ELECTRAFAN

ULVA+

• Lightweight, Portable Band Sprayer• Cleanup, Border & Strip Spraying• Low Volume, CDA Application• Applies Most Chemical Formulations• Minimizes Spray Drift• Battery Powered; No Pumping

Chemical Tank Volume: 2.5 literModel: MH-1 Herbi Standard

Chemical Output Rate: 2-5 oz/minBand Width: 4 ft precise circularTotal Spray Volume: 5-20 liters/acreDroplet Size: 200-300µPower Supply: 6V DC; 4-D cell batteriesShipping Weight: 5 lbs

• Lightweight, Portable Band Sprayer• Cleanup, Border & Strip Spraying• Low Volume, CDA Application• Applies Most Chemical Formulations• Minimizes Spray Drift• Battery Powered; No Pumping

Chemical Tank Volume: 2.5 literModel: MHF-2 Herbi Flex

Chemical Output Rate: .5-1.33 oz/minBand Width: 4-20 inch bandTotal Spray Volume: 5-20 liters/acreDroplet Size: 200µPower Supply: 6V DC; 4-D cell batteriesShipping Weight: 5 lbs

• Lightweight, Portable Band Sprayer• Cleanup, Border & Strip Spraying• Low Volume, CDA Application• Applies Most Chemical Formulations• Minimizes Spray Drift• Doubles Area Covered/Pass• Battery Powered; No Pumping

Chemical Tank Volume: 2.5 literModel: MHT-3 Herbi Twin

Chemical Output Rate: 2 - 5 oz/minBand Width: 5.5 - 7.5 ft patternTotal Spray Volume: 5-20 liters/acreDroplet Size: 200-300µPower Supply: 6V DC; 4-D cell batteriesShipping Weight: 5 lbs

MICROFIT HERBI STANDARD

MICROFIT HERBAFLEX

MICROFIT HERBI TWIN


Chemical Application

33

• Make Your Injector Portable

• Fits Dosatron or Dosmatic Injectors (specify)

• 20 Gallons, 4 Wheels

• Sumped Drain with Valve

• Vinyl Coated, Corrosion Free Cart

• Includes 200 Mesh Filter, Back-FlowCheck Valve & All Plumbing

Model: FC20–DM Dosmatic™Model: FC20–DT Dosatron™

Tank Volume: 20 gallonsINJECTOR SOLD SEPARATELY

FERTICART™

• Make Your Injector Portable

• Fits Dosatron Injector; D14 only

• Three Independent, 7-Gallon Tanks

• Individual Tank Drains with Valves

• Vinyl Coated, Corrosion Free Cart

• Includes 200 Mesh Filter, Back-FlowCheck Valve & All Plumbing

Tank Volume: 3 - 7 gallons

Model: FC3X7-DT Dosatron™

INJECTOR SOLD SEPARATELY

FERTICART™ FC3X7

• 50 gallon capacity

• Works with Dosatron D14, D45 & DB (specify model)

• Vinyl coated, corrosion-free cart

• Includes 200 mesh filter, back-flow preventer, check valve & all plumbing

• Agitation or Aeration mode

• Aerates solution for use with nematodes

Tank Volume: 50 gallons

Model: FC50 w/D8R FERTICART™ FC50

• Thoroughly mix any solution

• Keeps water soluble fertilizer, fungicide,insecticides & PGR’s in suspension

• Perfect for use with injectors

• Agitation or Aeration mode

• Aerates solution for use with nematodes

Tank Capacity: 5 gallons

Model: AAB12VModel: AAB240V Euro Plug

Flow Rate: 1 gpm

AGITATION/AERATION BUCKET


• Greenhouse – 101 hp• Livestock/Poultry• 4 Nozzles

Weight Empty: 67 lbsModel Number: K–30/20/BIO

Output Time: 60L/45 minDistance Propelled VK I: 200 ft

Distance Propelled NF/VK II: 100 ft

Chem Tank Capacity: 2- 55 l. tanksFuel Tank Capacity: 20 liter tank

• Greenhouse Poultry/Livestock

• 101 Horsepower• Portable• 2 Nozzles

Weight Empty: 25 lbsModel Number: K–30 & K-30/O


Distance Propelled NF/VK II: 100 ft Chem Tank Capacity: 10 litersFuel Tank Capacity: 2 liters/0.5 gal


• 50 Horsepower• Portable• 1 NozzleAVAILABLE as K-22 BIO Unit


Output Time: 10L/30 minDistance Propelled VK I: 160 ft Distance Propelled NF/VK II: 110 ft Chem Tank Capacity: 10 litersFuel Tank Capacity: 2 liters/0.5 gal


• 25 Horsepower• Portable• 1 Nozzle



Distance Propelled NF/VK II: 45 ft Chem Tank Capacity: 10 litersFuel Tank Capacity: 2 liters/0.5 gal

• Poultry/Livestock• 101 Horsepower• Stationary• 2 Nozzles

Weight Empty: 58 lbsModel Number: K-30/20/O K-30/20F

Output Time: 30L/45 minDistance Propelled VK I: 200 ft Distance Propelled NF/VK II: 100 ft

Chem Tank Capacity: 55 litersFuel Tank Capacity: 20 liters/5.2 gal

K-10 PULSFOG™

K-22 PULSFOG™

K-30 PULSFOG™

K-30/20/O PULSFOG™

K-30/20 BIO PULSFOG™ *

*PulsFOG BIO UNITS– For use with heat sensitive chemicaland biological agents. A second injection system consistingof an additional tank and set of nozzles uses plain water tocool the exhaust allowing many heat sensitive products tobe fogged without damage. Additionally, the use of a sec-ond tank allows for larger areas to be treated without refilling.Please consult the manufacturer or Dramm for approvedchemicals.


Chemical Application Chemical Application

All PulsFOGs are now approved for corrosive duty

Weight Empty: 99 lbsModel Number: K–4 Bio

Output Time: 30L/30 minDistance Propelled VK I: 390 ft Distance Propelled NF/VK II: 250 ft Chem Tank Capacity 2– 50 liter tanksFuel Tank Capacity: 20 litersContact Dramm for more information

K-4 PULSFOG™• Greenhouse/Livestock• 125 Horsepower• Frame Mounted Non-Portable• 6 Nozzles• 12 v Electric Ignition• Bio-Technology (see note pg 34) *

For best results, PulsFog requires the use of carrier solutions.Dramm carries 3 solutions:


Model Number: K-30/20C-BFModel Number: K-30/20C CARTS for K-30/20


K-30/20C-BF

• Cart for K-30/20 machines• BigFoot option w/Pneumatic wheels

K-30/20Cw/mountedpulsFOG

Chem Tank Capacity 400 liters

Model Number: TF400A or TF400GVDistance Propelled: 300’ from ea. nozzle

Mounting: 3-Point hitchTreatment area/Tank: 2,000,000 sq.ft.

Tractor Requirements: 50 HP 540 RPM

TRACFOG™• PTO Driven Fog System• Dual Nozzles• Independent Solenoid Valves• 2 models: Standard Unit orGreenhouse Vegetable Unit

• VKI - For EC Chemicals• VKII - For all Other Chemicals• NutriFOG™ - Preferred for Greenhouse, works with all chemicals


• Automatic Chemical Application

• Low Volume Spraying

• Treats 12,000 Sq Ft

• Treats 26,000 Sq Ft with Additional Fans

• 120 Volts 60HZ

• Separates for Portable Use

Chemical Tank Volume: 7 litersModel: SLVH Autofog™

Chemical Output Rate: 45cc/minSystem Rated Load: 11.1 ampCompressor HP: 3/4 hpCompressor Output: 2.43 CFM @ 21PSIHose & Cord Length: 33 ftDimensions: 18.25” wideShipping Weight: 156 lbs


• Drastically Reduce Labor Costs


• Treats up to 3,000 Sq Ft


• 120 Volts 60HZ

Chemical Tank Volume: 8 litersModel: MLVH Autofog™

Chemical Output Rate: 45cc/minSystem Rated Load: 10.3 ampCompressor HP: 3/4 hpCompressor Output: 2.43 CFM @ 21PSICord Length: 4 ftDimensions: 10” wideShipping Weight: 83 lbs





• 240 Volts 60HZ

• Separates for Portable Use

Chemical Tank Volume: 14 litersModel: LVH Autofog™

Chemical Output Rate: 55cc/minSystem Rated Load: 8 ampCompressor HP: 1 hpCompressor Output: 4.06 CFM @ 28.5PSIHose & Cord Length: 100 ftDimensions: 18.25” wideShipping Weight: 187 lbs

• Dual Head AutoFog™

• 240 Volts 60HZ




• Drastically Reduces Application Time

• Custom order

Chemical Tank Volume: 2- 14 litersModel: DLVH Autofog™

Chemical Output Rate: 2- 55cc/minSystem Rated Load: 14.2 ampCompressor HP: 2- 1 hpCompressor Output: 4.06 CFM @ 28.5PSIHose & Cord Length: 2- 100 ftDimensions: 23” wideShipping Weight: 300 lbs

MLVH MINI AUTOFOG™

SLVH AUTOFOG™

LVH AUTOFOG™

DLVH DUAL AUTOFOG™


Chemical ApplicationStainless Steel Nozzle

available for use with oxidizers

• Targeted, Low Volume Chemical Application

• Drastically Reduce Labor Costs


• 120 Volts 60HZ


Chemical Tank Volume: 70 litersModel: CFAR 20-150

Chemical Output Rate: 1 liter/minSystem Rated Load: 10 ampHose Length: 150 ftCord Length: 4 ftDimensions: 20” wideShipping Weight: 97 lbs

CFAR-20/150 COLDFOGGER™

• Even, Constant Spray

• Apply All Formulations of Chemicals

• Great for Growth Regulators

• No Hand Pumping- Tank Not Pressurized

• Fine Mist to Straight Stream Output

• Padded Shoulder Straps & Back Rest

• L5-E Lance Available

Tank Volume: 4 gallonsModel: BP-4

Chemical Output Rate: Max. 1 gpmPower Supply: 12v DC; rechargeableLength of Charge: 2 hrsWeight when Full: 40 lbsShipping Weight: 15 lbsCharge Time: 7 hrs

BP-4 BACKPACK SPRAYER

Tank Volume: 4 gallonsModel: BP-4Li

Chemical Output Rate: Max. 1 gpmPower Supply: 18v DC; rechargeableLength of Charge: 45 minutesWeight when Full: 40 lbsShipping Weight: 15 lbs***Charge Time: 2 hrs

BP-4Li BACKPACK SPRAYER


• Swapable, Lithium ion Battery

• Even, Constant Spray


• Great for Growth Regulators

• No Hand Pumping- Tank Not Pressurized

• Fine Mist to Straight Stream Output

• Padded Shoulder Straps & Back Rest

• L5-E Lance Available

Tank Volume: 20 gal./ 50 gal.Model: WC–20/ WC-50

Power Supply: 12v rechargeableHose Length: 12 feet

• Portable Watering System

• 4 gpm Output

• Rechargeable

• Pumps up to 300 gal Before Charging

• Constant Flow

• Non-Marking Wheels & Casters

WATER CART


WC50

Bigfoot option

WC20


• Forward momentum for greater turbulence

• Easy pattern adjustment

• Even coverage

• Turbulent spray

Model: MS-TG MSO Trigger GunFeature: adjustable trigger 0.5 gpmMax. Pressure: 500 PSIVolume: 0.5 gpm

Model: MS40-TG HYDRA Trigger GunFeature: adj. trigger 1.25 gpmMax. Pressure: 725 PSIModel: MS40-TG10 1.0 mmModel: MS40-TG12 1.2 mmModel: MS40-TG15 1.5 mmModel: MS40-TG20 2.0 mmModel: MS40-TG23 2.3 mmModel: MS40-TG30 3.0 mm

Model: L-5 Lance Feature: 5-nozzle ring, adj. lengthMax. Pressure: 500 PSI

MS40–TG

• Forward momentum for greater turbulence

• Easy pattern adjustment

• Even coverage

• Turbulent spray

MS–TG

• 5 Nozzle Ring for Turbulent Spray

• Adjustable Length

• Variable Flow Rate

• Perfect for Baskets and PGR Applications

• L5-E Option for BP-4 without Valve and Handle

L-5 LANCE

Model: MS40-DA

• Quick connects to Dramm Hydra™ Sprayers

• Includes High Pressure, Stainless Steel Quick Connects

• 24” Length for Easy Drenching

DRENCHWAND

Model: MD-9Model: 842441 0.8 mmModel: 842442 1.5 mmModel: 842443 2.0 mmModel: 840925 2.5 mmModel: 842444 3.0 mm

• 750 PSI max Pressure

• Adjustable Pattern

• 1/2” Male Pipe Thread

STAINLESS STEEL SPRAYGUN





• Apply Exact Doses Directly to Root Zone


• Variable Precision Output

• Variable Interval Between Dosing

• Dosing Cycle Counter

• 3 Wand Lengths: 16”, 30” & 38” forBench, Ground, or Hanging Baskets

Tank Volume: 20 gallonsModel: CD-120

Accuracy: +/- 1ml per cyclePower Supply: 12v DC; rechargeableHose Length: 25 ftDimensions: 20.5” wideShipping Weight: 102 lbs

• Precisely Measures Chemical Doses

• Use as Single Shot or Interval Based Doses

• Works with an Injector or Sprayer. Any Source Less than 100 psi

• Variable Interval Between Dosing

• Advanced Features such as Dose Count,Maximum Number of Doses & Control Lock–Out

Accuracy: +/- 1ml per cycleModel: CD–2 Chemdose

Power Supply: 12v DC, Rechargeable

CD-120 CHEMDOSE™

CD2 CHEMDOSE™

Quality Since 1941

COR PO RAT I O NPO BOX 19602000 North 18th StreetManitowoc, WI 54221-1960, U.S.A.920.684.0227

Dramm Canada Address:906 HWY 20 W RR#4Fenwick, ONT LOS 1C0Canada905.892.5644

[email protected]

3/2017 10,000

Documents

170AL WATER BREAKER NOZZLE