Ports and Maritime Organization Seafarer's Examination and Certification Directorate Exam Code : CMSB - 892 Subject : Cargo handling & Stowage Date: Rank: Chief Officer (GT≥3000) Time allowed: 2.5 Hours (Pass mark : 55) Q.1) a) Draw a typical block diagram of I.G. system in an oil tanker. (8 marks) b) Describe use of inert gas during discharging , tank cleaning and gas freeing with reasons for various stages in the operation. (12 marks) Q.2) Explain requirements and precautions when loading sugar in bag . What are securing arrangements? (20 marks) Q.3) a) What are the different hazards associated with carriage of solid bulk cargo . (10 marks) b) What publications you can refer for carriage of solid bulk cargo. (5 marks) c) Define flow moisture point . (5 marks) Q.4 ) a) What are the general principles and points that should be considered when planning for loading containers and precautions necessary in port during cargo operation. (10 marks) b) What is meant by container cell position 220810 . Any indication of container's length. (5 marks) c) Define bay and stack load in a container vessel? (5 marks) Q.5) With refer to MARPOL 73/78 annex1 regulation how an oil record book shall be completed on each occasion a) For a machinery space operations (10 marks) b) For cargo / ballast operations. (10 marks)
(Pass mark : 55) Q.1) a) Draw a typical block diagram of I.G.
system in an oil tanker. (8 marks)
b) Describe use of inert gas during discharging, tank cleaning
and gas freeing with reasons for various stages in the operation.
(12 marks)
Q.2) Explain requirements and precautions when loading sugar in
bag.
What are securing arrangements? (20 marks)
Q.3) a) What are the different hazards associated with carriage
of solid bulk cargo. (10 marks) b) What publications you can refer
for carriage of solid bulk cargo. (5 marks) c) Define flow moisture
point. (5 marks) Q.4 ) a) What are the general principles and
points that should be considered when planning
for loading containers and precautions necessary in port during
cargo operation. (10 marks) b) What is meant by container cell
position 220810. Any indication of container's length.
(5 marks) c) Define bay and stack load in a container vessel? (5
marks)
Q.5) With refer to MARPOL 73/78 annex1 regulation how an oil
record book shall be
completed on each occasion a) For a machinery space operations
(10 marks) b) For cargo / ballast operations. (10 marks)
