1604576014 INE VO DD WB Vol1 Mod3 Sys Phone Tasks

Voice Deep Dive Workbook Version 3.5 Module 3 CUCM Syst em and Phone Basics :: Tasks Lab Instructions: Prior to starting this lab, ensure that you have both read through the Voice Rack Rental Guide before beginning this lab, so that you are fully aware of how all equipment works and is accessed, and that you have loaded both the initial rout er/switch configs from INE’s members’ site, and that you have manually loaded the CUCM initial configs as described below. Note - Most Deep Dive lab scenarios require existing configuration before they can begin to be configured. Also, most lab scenarios use different pre-configuration from other Deep Dive labs. Therefore it is necessary to load the "Startup Configs" prior to beginning any of these lab scenarios. - To load your router and switch configs, fir st log into your INE.com Members account, then navigate to the "Rack Rental" tab, and click on "Control Panel" >> "Click here to choose a configuration to be l oaded on your Voice Rack", then choose the appropriately named selection for this module. This will only load your router and switch configs (pstn, r1, r2, r3, sw1, sw2). - To load your CUCM server initial configs, please log into the CUCM Admin WebUI, and use the “Bulk Administration” tool to upload & import the appropriately named “DD- ModXX-CUCM-Startup.tar" file that was included in your Members account for this module. Here are two brief demonstration videos on how t o successfully accomplish this upload and import into CUCM: Importing or Exporting Configurations in CSV file from CUCM (15 mins), and Fixing Any Issues That May Arise With Importing CSS and CdPTP & CngPTPs (8 mins). Copyright © 2011 Internetwork Expert www.INE.com - 1 -

Documents

1604576014 INE VO DD WB Vol1 Mod3 Sys Phone Tasks