Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
16-WAY DIMMER
AL – DIM16
FEATURES
Working voltage: AC220V – AC240V / 50 – 60
Hz
Output power: 16 x 3 kw
Function characteristics: 3 kw x 8 way switch
output control
3 kw x 8 point control with adjustable light output
control
Dimming
Program
Acoustic
Speed
Display 8 road
5 program files
Audio speed control function
Specific introduction: Suitable for small and
medium sized ballroom.
Note: Recommended not to control the lamps
and lanterns of more than 2.5 KW.
*Accessories shown in the picture are not included with the product.
SIGNAL AMPLIFIER
AL-AMP-001
FEATURES
Voltage/frequency: AC220-240V / 50 to 60 Hz
International standard DMX512 signal
4-way output
Net weight: 2Kg
*Accessories shown in the picture are not included with the product.
SIGNAL AMPLIFIER
AL-AMP-002
FEATURES
Voltage/frequency: AC220-240 - v / 50 to 60 Hz
International standard DMX512 signal
All the input output (equipped with 6 road in color output, for the five core interface.
6 channels DMX512 output, three core interface)
Packing size: 310 * 300 * 135 mm
Net weight: 2 kg
*Accessories shown in the picture are not included with the product.
SUN CONTROL TABLE
AL-CS-512
Features:
DMX512/1990 standard. 512 DMX control
channel.
2 road with optical isolation of
independent output drive port
With 2000 VDC electric resistance
Air impact ability
Big screen with a backlit LCD display.
16 channel push rod, a speed control
putter
1600 light step program storage capacity
More than 100 steps. Each independent
setting speed, gradient parameters.
Optional music
Step or manual speed control.
The program step the time range from
0.03 s - 180 s
Can directly call 48 scenarios
Brain lamp for manual operation (lamp).
16 bit amount of X/Y control precision
15 key environment, quick call different
scenarios, go light, combination of manual
operation.
Music trigger signal source can be taken
from the audio circuit input or built-in
microphone pickup.
Easy to learn and use.
Maintain shutdown data.
Power input: DC9V 1000 ma
Net weight: 6.5 kg
*Accessories shown in the picture are not included with the product.
CONTROL TABLE 001
AL-CT-001
Features:
DMX512/1990 signal output
504 control channel
At the same time control 20 amount of 24
channels
Eight channel control pusher
A rocker device can be set up
12 games go lamp program
Each program's largest 40 step
A total of 480 amount of light step
program
Scene gradient 0.1 - 25.5 seconds
(Cross) the adjusting range
0.1-25.5 seconds to go light Speed
(Speed), the adjusting range
Automatic memory gradient
Large capacity 128 k memory
DMX signal output connector: XLR -
D3F
Power input of 00 DC 9V 10 ma
Size: 485 mm * 250 mm * 91 mm
*Accessories shown in the picture are not included with the product.
CONTROL TABLE
AL-CT-002
Features:
Voltage DC9-12 v, 1000 ma min.
Applicable for all kinds of middle-grade
and high-grade stage, song and dance
theatre, TV studio, multi-function hall,
show square, organ hall, entertainment
city, DISCO club entertainment games
Console channel number: 384
Dimension: W183 L520 H73 mm
Packing size: 62 X 22 X 15 cm
Power input: DC9-12 v, 1000 ma min
Net weight: 3.0 Kg
*Accessories shown in the picture are not included with the product.
CONTROL TABLE
AL – CT003
Features:
Can control up to 12 sets of amount, each
amount of up to 16 channels
Programmable memory storage (Bank)
30, each can store eight scenes (Scene)
6 Step programmable sequence (Chase),
each step sequence programmable 240
steps (that is, eight Scene 30 Bank)
Eight channel control pusher
2 hand wheel
Data between two control units can pass
to send and receive file cache area
Gradient in the run mode, (you can
choose ALL FADE) with (ALL) or (X/Y)
have alone, ALL FADE
SPEED regulation
8 channels or 16 working mode Digital wheel device can fine-tune the lamps and lanterns on the horizontal/vertical movement Blackout output Built-in microphone MIDI control DMX polarity selection switch / Memory protection Power input: DC9V 1000 ma Audio input: Built-in microphone or even audio line, 100-1 mv VPP DMX input/out: 3 needles male/female The MIDI input: 5 needles interface *Accessories shown in the picture are not included with the product.
CONTROL TABLE
AL-CT-004
Features:
Total number of channels: 192
Can edit and store 100 scenarios
Can directly run 12 special effects scene
Can edit and run 12 go lamp application
100 step light process.
Manual lantern control function
Program stack operation output
Built-in voice control go light function
Have black field output function
Go light velocity and gradient adjustment
function
Independent development, stable and
reliable performance.
Weight: 2.5 KG *Accessories shown in the picture are not included with the product.
PEARL CONTROL TABLE
CT - 2010
Features:
Four full speed, individually opto-isolated and
floating DMX Output Ports
2048 DMX Channels
Separate 44 Hz full speed
DMX processor
Avolites enabled
Customizing of DMX parameters including
Break Length, Mark After Break and Interbyte
Timing giving smooth, consistent control of
even the trickiest fixtures
Avolites Video support - Media Server
Support utilizing Avolites Active Fixtures in
conjunction with the new, cross platform,
Media Server protocol “CITP” where “Clips”
and Live Previews are presented graphically
on the console screen.
Net Weight:14KG
Size:710 x 530 x 260mm
*Accessories shown in the picture are not included with the product.
DIMMING SILICON BOX
AL – DSB 01
Features:
16 independent sub control dimmer
function + 8 road collection of switch
control the dimming function/point control
function, with the voltage indicator.
A variety of effects on light function can
independently control the dimming control
dimmer, set, the key point of control
effect
All lights can be run at the same time with
the eight set dimming effect, has A - B - A
conversion function
Working power supply: ac 220 v to 380 v
(+ -) 5%
Frequency: 50 Hz (+ -) 2 %
Output power: 64 kw
Net weight: 15.5 Kg
*Accessories shown in the picture are not included with the product.
TIGER CONTROLLER
AL-SC-Tiger
Features
Powerful Titan (Titan) operating
system
Core Duo processor, 60GB solid
state hard drive, 2GB of memory
Built – in multi language
Built-in 15.4-inch high-resolution
widescreen touch screen (industrial
screen)
Support for networked devices to a
computer to control various lighting
3D visualization software
Art-Net network support functions,
expandable to 12 DMX output lines
(field), 6144 channels
10 Macro function buttons, allowing
you faster operation console
20 playback faders program
supports more than 1000
reproduced
Powerful attribute control window,
CMY \ RGB palette pickup system
Console itself 2048 DMX-512
channel output, comes with a 4
extender (sold separately), a total
of 4096 channel output
Support graffiti-style logo screen
function
Quick and easy to use graphics generator
Built-in graphics classification easier to use
Support CIPT protocol, can be seen directly in the center console image thumbnails media
server media clip
It supports Wi-Fi access, wireless control lights, mobile devices (iPhone, iPad Touch) Remote
control lighting
Built-in database of thousands of lights, light library built editing software, you can always control
the stage lights library provision
Built Visualiser line-style lighting visualization software
Support for MIDI Time Code synchronization of sound and light, which can also play music in the
console
Send timecode to control the lighting program playback
*Accessories shown in the picture are not included with the product.