Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
0
2
4
6
8
10
12
14
16
18
20
22
1 60
0
1 80
0
2 00
0
2 20
0
2 40
0
2 60
0
2 80
0
3 00
0
3 20
0
3 40
0
3 60
0 RPM
HP
Max power Max torque Propeller power curve Fuel consumption on propeller curve
Technical specificationsPower * 15,4 kW (21 hp)Max RPM * 3600 RPMDisplacement 0,719 liters (46,86 cu inch)Number of cylinders 3 in lineBore and stroke 2,64'' x 2,68'' (67 mm x 68 mm)Compression ratio 23 / 1Combustion system Indirect (E-TVCS)Intake AtmosphericalCooling Heath ExchangerEl. equipment / Alternator 12 V / 70 AInstrument panel A3Transmission MechanicalEngine Max Install. Angle 15°Sail Drive SD 2,52 : 1Dry weight (with transmission) 233,7 lbs (106 kg)Dry weight (with Sail Drive) 317,47 lbs (144 kg)
ConnectionsExhaust 1,57" (40 mm)Fuel 0,31'' (8 mm)Sea Water 0,79'' (20 mm)* At engine flywheel, according to ISO 8665-1
NANNI DIESEL uses and recommends www.nannidiesel.com
The engine illustrated above is not necessa-rily identical to the standard production engine. The specifications are subject to change without notice. The specifications are defined for marine pleasure use. For every other application, please consult us.
N3.21
- Inboard -
BASE
15,4 kW (21 HP)
- Sai l Dr ive -
daNm
Liters hour
A 3 Instrument Panel Keel Cooling - Tachometer /Hour meter PTO Pulley - Oil pressure Warning light and acoustical alarm Two pole electrical system - Water temperature Warning light and acoustical alarm - Alternator pilot light - Glow plug pilot light Exhaust system - Ignition start key Flexible coupling Control cables mounting points Fuel hoses Electrical braid 4 meters Remote control Electrical stop Sea water hoses Electrical system 12 V Sea water system Engine flexible mounts Exhaust elbow with water injection Fresh water pump Fuel feed pump Fuel filter Heat exchanger In line injection pump Mechanical gearbox or Sail Drive Oil extraction pump Oil filter Owner's manual Sea water pump Thermostat Warranty certificate
N3.21 15,4 kW (21 HP)
Standard equipment Optional equipment
Optional accessories
NA
NN
I DIE
SE
L uses and recom
mends
Nanni Industries S.A.S. - 11,Avenue Mariotte-Zone Industrielle - BP 107- 33260 La Teste France - Tel : + 33 (0)5 56 22 30 60 - Fax : +33 (0)5 56 22 30 79 - E-mail : [email protected]
BASE
ww
w.nannid
iesel.com
Dealer’s stamp
A3 - 205 x 120 mm
- In
boar
d -
- S
ail
Dri
ve -
N3.21 + TMC 40