• Single Rod Set• Double Rod Set• Corner Window Rod Set• Bay Window Rod Set

• Single, Double, Corner and Bay sets come with standard brackets included.Extension brackets can be substituted for no additional charge.

• Double rod sets feature end cap finials on the 1” back rod.

• No finials on inside mount rod sets.

• Rod widths greater than 72", include center support brackets.

DIMENSIONS3/4" W x 2-1/2" H 1-3/4" W x 2-1/4" H2-3/4” W x 3” H7/8” W x 2” H2-3/4" W x 2" H2-1/2" W x 2-3/8" H1/2" W x 2-3/4" H1-1/4" W x 2-3/4" H1-3/8" W x 2" H3/4" W x 2" H2-1/8" W x 2" H

DIMENSIONS1" W x 5" H x 4-5/8" D (3-1/2" projection)1" W x 5" H x 6-1/8" D (2-1/2" & 5” projection)1" W x 5" H x 6-1/8" D (5” projection)

FINIALSDESCRIPTIONKnobRibbonBow TieBlockCylinderBallEnd CapClear SquareContempoSimple EndClear Cylinder

BRACKETS (RINGS)DESCRIPTIONForged Single Forged Double(1) Forged Extended C-Ring Center Bypass 4" W x 1-1/8" H x 4-5/8" D (3-1/2" projection)C-Ring Double Center (1) 4" W x 1-1/8" H x 6-1/8" D (2-1/2" & 5” projection)C-Ring Extended CenterInside MountCeiling

4" W x 1-1/8" H x 6-1/8" D (5" projection) 2" W x 4-1/2" H x 1" D (1/8" projection)1" W x 4-1/2" H x 4" D (3-1/2" projection)

(1) Front cup holds a 1-1/2" rod and back cup holds a 1" rodProjection is measured from the center of the bracket cup to the back plate of the bracket. D is the distance; it is measuredfrom the front of the bracket to the back plate of the bracket. W is the horizontal length of the bracket while the H is thevertical length of the bracket back plate.

TIEBACKSDESCRIPTION Orbed (U style) Orbed (Post style) End Cap (Post style) End Cap (U style)

DIMENSIONS6" face x 1-1/2" width x 3" projection2-1/4" width x -3/4" projection1 -5/8" width x 4" projection6" face x 1-1/2" width x 3" projection

SPECIFIC

AT

ION

S & D

IMEN

SION

S

© C

op

yrig

ht 2020

INSIDE DIAMETER2"2"

RINGS DESCRIPTION Rings - eyelet (10 pack) Rings - eyelet (10 pack) C-Ring *Rings - eyelet (10 pack)**Rings - eyelet (10 pack)* C-Ring*Fits back rod on double rod set only

1-1/2"1-1/2"

ROD SET INCLUDES: Rod, finials, brackets and mounting hardware.

Rod Sets up to 94” are made as one piece. Rod Sets over 94” and up to 188” will come in two pieces. Rod segments made in one piece over 94” carry a substantial shipping surcharge and additional production surcharge.

SEE PRICE LIST FOR PRICES AND ORDERING INFORMATION

NEXT GENERATION IRON TRAVERSE & RINGS1.5” DIAMETER ROD SETS

FINIALS

NEXT GENERATION IRON

MOTORIZED

TRAVERSE

RINGS

Knob

Ball

Ribbon

End Cap

Bow Tie

Clear Square

Contempo

Block

Cylinder

Simple End

Clear Cylinder

BRACKETS (TRAVERSE)DESCRIPTIONStandard Extension Double Standard Center Extension Center Double Center Ceiling

DIMENSIONS1" W x 5-1/2" H x 4-1/4" D (3-1/2" projection)1" W x 5-1/2" H x 5-3/4" D (5” projection)1" W x 6-1/2" H x 7-3/8" D (3" & 6-1/2” projection)4" W x 1" H x 4-1/4" D (3-1/2" projection)4" W x 1" H x 5-3/4" D (5" projection)1" W x 2" H x 7-3/8" D (3" & 6-1/2” projection)2-7/8" W x 1-1/2"- 12" H (Custom made)

STANDARD CARRIERSDESCRIPTION 8 Wheel Master (Overlap)8 Wheel Master (Under)1/2" Ball Bearing Carriers (White or Bronze)

RIPPLE-FOLD CARRIERSDESCRIPTION 8 Wheel Ripple Snap Master (Overlap)8 Wheel Ripple Snap Master (Under)Ripple Snap Carrier 80% Fullness (2-3/8")Ripple Snap Carrier 100% Fullness (2-1/8")Ripple Snap Carrier 120% Fullness (1-7/8")

N e w D e s i g n s & F i n i s h e s i n R i n g , T r a v e r s e a n d M o t o r i z e d C o n f i g u r a t i o n s

* Finials shown inNickel Finish

BAY DRAPERY HARDWARE BAY DRAPERY HARDWARE

209-405-1726 209-405-1726

ELBOW CONNECTOR

1.5 inch

OIL RUBBEDBRONZE

31

RUSTICA14

BLACK

03

For Motorized & Traverse

STANDARD DOUBLE EXTENSION

NICKEL

16

SMOKE

01

DOUBLE ROD SETS

DOUBLE CENTERSTANDARD CENTER

EXTENSIONCENTER

CEILING BRACKET

BRACKETS

Rod Sets are custom made, assembled & shipped ready to install

DOUBLE ROD SET 1.5 inch back rod Simple End Cap included on back rod

MOTORS & REMOTES FACTORY PAIRED

ONE-WAY DRAW

MOTORS

REMOTES

Dual-Channel

15-Channel Remote & 15-ChannelWireless Wall Switch available

Dual-ChannelWireless Wall Switch

1.5 inch

ADJUSTABLE ELBOW CONNECTOR For Corner and Bay Windows

RIN

GS

TRAVER

SE

- Single & Double Rod Sets

- Center & One-Way Draw

- Standard & Ripplefold

- Micro Ball Bearing Carriers

- Corner & Bay Rod Sets

- Rods Up To 188"

DOUBLE ROD SET 1" back rod End Cap Finial included on back rod

Two-Segment Rod Sets have a center splice with low profile screws

BAYS & CORNERSWe can calculate your rod lengths for all your bay and corner windows

PLEASE SEE THE MEASURING GUIDE

- Single & Double Rod Sets

- Center & One-Way Draw

- Automatic Limit Position

- Soft Opening & Closing

- Whisper Quiet

- Rod Sets Up To 188"

- Optional WiFi Module for

Control with Alexa, Siri,

Google Assistant & Smart Phone

MOTORIZ

ED

RINGS

New!

New!

Wi-Fi

110v Motor with 12' c ord or 12v Lithium battery powered Motor

- Single & Double Rod Sets

- Corner & Bay Rod Sets

- Magnetic Brackets

- Long Lengths Available1.5 inch

2 inch

2 inchC-Ring

For Rings

Optional Wi-Fi Module easily connects to bottom of motor

"Alexa, open the curtains."

CEILING BRACKET

* Rod Set shown inSmoke Finish

DOUBLE BYPASS

FORGEDSINGLE

CENTER BYPASS

TIE BACKS

FORGED EXTENDED

FORGED DOUBLE

EXTENDED BYPASS

END CAP(U-STYLE) ORBED

(U-STYLE)

END CAP(POST-STYLE)

ORBED(POST-STYLE)

* BRACKETS & TIE BACKSshown in Nickel Finish

INSIDEMOUNT

BAY DRAPERY HARDWARE BAY DRAPERY HARDWARE

209-405-1726 209-405-1726