14 BRAKES (Freins) 2010

806

All part numbers in BOLD MAGENTA are new for 2010.

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

807

CONTRAST-CUT™ TWO-PIECE BRAKE ROTORS•420 stainless steel outer band•Machined Contrast Cut™ aluminum carrier

•Contrast Cut™ finish starts with a polished carrier that has been black anodized and then re-cut to open up the design

•Specifically designed for use with Performance Machine wheels

•Made in the U.S.A.

NOTE: 11.5” rotors will fit 84-99 applications if used in conjunction with PM calipers.

NOTE:13” rotors will require the use of PM calipers designed for 13” rotors.

DESCRIPTION GASSER SUG. RETAIL RIVAL SUG. RETAILFOR 00-10 MODELS (EXCEPT 08-10 DRESSERS, V-ROD, SPRINGERS, 86-99 FLT/FLHT/FLHR REAR, 06-10 DYNA GLIDE FRONT)11.5” rotor, front left 1710-0498 $329.95 1710-0618 $329.9511.5” rotor, front right 1710-0498 329.95 1710-0619 329.9511.5” rotor, rear 1710-0499 329.95 1710-06201 329.95FOR PM WIDE WHEELS (2.50” FLANGE)11.5” rotor, rear 1710-0500 329.95 1710-06211 329.95FOR 00-10 MODELS (EXCEPT 08-10 DRESSERS, V-ROD, SPRINGERS, 06-10 DYNA GLIDE)13” rotor, front left 1710-0501 429.95 1710-0622 449.9513” rotor, front right 1710-0501 429.95 1710-0623 449.95FOR 08-10 FLTR/FLHT/FLHR/FLHX, 06-10 DYNA (FRONT ONLY)11.8” rotor, front left 1710-0502 329.95 1710-0624 329.9511.8” rotor, front right 1710-0502 329.95 1710-0625 329.9511.8” rotor, rear 1710-0503 329.95 1710-06261 329.951 Right rear applications only because of directional design.

Gasser Rival

IMAGE SERIES ONE-PIECE BRAKE ROTORS•Machined from high-grade stainless steel, then polished•Each design perfectly matches the pattern of the PM wheel•Available in four styles: Rival, Wrath, Hooligan and Torque•Wide rear wheels require special 11.5” rotors with a 2.50” i.d. flange•Made in the U.S.A.

NOTE: 11.5” rotors for 84-99 wheels need a spacer that is available separately

NOTE: 13” rotors will require the use of PM calipers designed for 13” rotors.

DESCRIPTION RIVAL WRATH HOOLIGAN TORQUE SUG. RETAILFOR 84-10 MODELS (EXCEPT 08-10 DRESSERS, V-ROD, SPRINGERS, 86-99 FLT/FLHT/FLHR REAR, 06-10 DYNA GLIDE FRONT)11.5” rotor, front left 1710-0627 1710-0036 1203-5510 1710-0168 $295.9511.5” rotor, front right 1710-0628 1710-0036 1203-5510 1710-0169 295.9511.5” rotor, rear 1710-06291 1710-0037 1203-5511 1710-01701 295.9513” rotor, front left 1710-06312 1710-0254 1710-0251 1710-0252 379.9513” rotor, front right 1710-06322 1710-0254 1710-0251 1710-0253 379.95FOR PM WIDE WHEELS (2.50” FLANGE)11.5” rotor, rear 1710-06301 1710-0038 1203-5512 1710-01711 295.95FOR 08-10 FLTR/FLHT/FLHR/FLHX, 06-10 DYNA (FRONT ONLY)11.8” rotor, front left 1710-0633 1710-0445 1710-0441 1710-0450 295.9511.8” rotor, front right 1710-0634 1710-0445 1710-0441 1710-0451 295.9511.8” rotor, rear 1710-06351 1710-0446 1710-0442 1710-04521 295.951 Right rear applications only because of directional design.2 SUG. RETAIL $295.95.

PART # DESCRIPTION SUG. RETAILSPACER1710-0636 For 11.5” rotors for 84-99 wheels $10.95

Rival

Torque

Wrath Hooligan


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

NESS-TECH® FLOATING BRAKE ROTORS•Precision CNC-machined from polished 420 stainless steel•Available in four styles that match Ness-Tech® Billet Wheel assemblies•Machined in the U.S.A.

NOTE: Rotors come with hardware to adapt to 84-10 wheel hubs and can be used in front or rear applications. Be sure to order the correct side, left or right, for your application.

808

DESCRIPTION DIESEL DIESEL CHROME JUDGE DOMINO MISSION RONIN SUG. RETAILFOR 00-10 MODELS (EXCEPT 08-10 DRESSERS, V-ROD, SPRINGERS, 06-10 DYNA GLIDE FRONT)11.5” rotor, front left 1710-0373 1710-0377 1710-0358 1710-0361 1710-0505 1710-0512 $329.9511.5” rotor, front right 1710-0373 1710-0377 1710-0358 1710-0361 1710-0505 1710-0513 329.9511.5” rotor, rear 1710-0374 1710-0378 1710-0359 1710-0362 1710-0506 1710-05141 329.9513” rotor, front left 1710-0372 1710-0376 1710-0364 1710-0365 1710-0504 1710-0510 429.9513” rotor, front right 1710-0372 1710-0376 1710-0364 1710-0365 1710-0504 1710-0511 429.95FOR PM WIDE WHEELS (2.50” FLANGE)11.5” rotor, rear 1710-0375 1710-0379 1710-0360 1710-0363 1710-0507 1710-05151 329.95FOR 08-10 FLT MODELS, 06-10 DYNA MODELS (FRONT ONLY)11.8” rotor, front left 1710-0433 1710-0431 1710-0435 1710-0437 1710-0508 1710-0516 329.9511.8” rotor, front right 1710-0433 1710-0431 1710-0435 1710-0437 1710-0508 1710-0517 329.9511.8” rotor, rear 1710-0434 1710-0432 1710-0436 1710-0438 1710-0509 1710-05181 329.951 Right rear only because of directional design that matches directional RSD wheel design.

TWO-PIECE CONTRAST-CUT™ BRAKE ROTORS•Designed specifically for use with RSD wheels•Feature aluminum carrier with a 420 stainless steel outer band•Available with chrome or Contrast Cut™ carriers (except 13” Diesel polished which has a highly-polished carrier)•Contrast Cut carriers start with a black anodized finish that is then re-cut to open up the design•11.5” and 13” rotors come with a spacer for use on 84-10 wheels•13” rotors use silent floaters•Wide rear wheels require special 11.5” rotors with a 2.50” i.d. flange•Made in the U.S.A. by Performance Machine

NOTE: 11.5” rotors will fit 84-99 applications if used in conjunction with PM calipers.

NOTE: 13” rotors must be used with Performance Machine calipers designed for 13” rotors. Will not work with calipers designed for 11.5” rotors.

DESCRIPTION EVIL 7 BATTISTINI JAGGED PSYCHO SUG. RETAIL11.5” FOR 84-10 MODELS (EXCEPT 08-10 DRESSERS, SPRINGERS, V-ROD, 86-99 FLT/FLHT/FLHR REAR, 06-10 DYNA GLIDE)Left 1710-0423 1710-0533 1710-0534 1710-0535 $299.95Right 1710-0423 1710-0533 1710-0534 1710-0536 299.9511.8” FOR 08-10 FLT AND 06-10 DYNA GLIDE (FRONT ONLY)Left 1710-0537 1710-0538 1710-0539 1710-0540 299.95Right 1710-0537 1710-0538 1710-0539 1710-0541 299.95

Diesel 11.5”

Diesel 13”

Evil 7 Battistini Jagged Psycho

Judge 11.5”

Judge 13”

Diesel Chrome 11.5”

Diesel Chrome 13”

Domino 11.5”

Domino 13”

Ronin 11.5”

Ronin 13”

Mission 11.5”

Mission 13”


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

809

DESCRIPTION CZAR ECLIPSE SAVAGE ECLIPSE SUG. RETAILFOR 00-10 MODELS (EXCEPT SPRINGERS, 08-10 DRESSERS, 06-10 DYNA AND V-ROD)11.5” left front 1710-0420 1710-1024 $335.9511.5” right front 1710-0421 1710-1025 335.9511.5” right rear 1710-0422 1710-1026 335.95

DESCRIPTION CZAR ECLIPSE SAVAGE ECLIPSE SUG. RETAILFOR 06-10 DYNA, V-ROD, 08-10 FLHT, FLHR, FLHX, FLTR11.8” left front 1710-0418 1710-1022 $335.9511.8” right front 1710-0419 1710-1023 335.95

TWO-PIECE SAVAGE ECLIPSE AND CZAR ECLIPSE BRAKE ROTORS•Features matching billet aluminum carrier bolted to high quality 440 stainless steel rotor

•Eclipse finish features a black powder-coating which combines with raw metal for a truly evil look

•Rotors match RC Components’ Czar Eclipse wheels and belt pulleys•Made in the U.S.A.

DESCRIPTION CALYPSO SAVAGE SAVAGE ECLIPSE IMPERIAL CZAR CZAR ECLIPSESUG.

RETAILFOR 00-10 MODELS (EXCEPT 08-10 DRESSERS, SPRINGERS, 06-10 V-ROD, 06-10 DYNA)Left front 1710-0428 1710-0531 1710-1027 1710-0532 1710-0388 1710-0389 $345.95

13” FLOATING FRONT ROTORS•CNC precision cut with the highest quality billet aluminum wrapped with a stainless steel band•Calypso, Savage, Imperial and Czar styled with a chrome finish•Savage and Czar are also available in Eclipse finish which combines black powder coating and raw metal for a truly evil look•Made in the U.S.A.

NOTE: Must use front caliper adapter bracket or aftermarket caliper for 13” rotor.

NOTE: When doing a single-disc conversion on 00-07 Dressers, use caliper adapter PART #s 1701-0148 or 1701-0149.

PART # DESCRIPTIONSUG.

RETAILFOR 00-07 FLHT/FLHR/FLHX/FLTR1701-0148 Chrome $88.951701-0149 Black 88.95

FRONT CALIPER ADAPTER BRACKETS•Allows stock caliper to be used with 13” floating rotors

•Available in chromed or black powder-coated

•Fits left front single-disc applications


DESCRIPTION DIAMETER CALYPSO SAVAGE IMPERIAL CZARSUG.

RETAILFRONTFor 00-10 models (except Springers, 06-10 V-Rod, 06-10 Dyna Glide, 08-10 Dressers) 11.5” 1710-0425 1710-0521 1710-0522 1710-0381 $265.95For 84-99 models 11.5” 1710-0430 1710-0529 1710-0530 1710-0384 265.95For 08-10 FLHT, FLHR, FLHX, FLTR, 06-10 Dyna Glide, 06-10 VRSCA models 11.8” 1710-0424 1710-0519 1710-0520 1710-0380 265.95REARFor 08-10 FLHT, FLHR, FLHX, FLTR models 11.8” 1710-0545 1710-0542 1710-0546 1710-0543 275.95For 00-10 models (except 06-10 V-Rod, 08-10 Dressers) 11.5” 1710-0426 1710-0525 1710-0526 1710-0383 265.95For 84-99 models (except FLT) 11.5” 1710-0429 1710-0527 1710-0528 1710-0385 265.95For 06-10 V-Rod models 11.8” 1710-0427 1710-0523 1710-0524 1710-0382 265.95

ONE-PIECE BRAKE ROTORS•Fully polished stainless steel rotors are CNC-machined and quality tested•Rotors match RC Components’ Calypso, Savage, Imperial and Czar wheels and pulleys


Czar Eclipse

Czar Eclipse

Calypso

Calypso

1701-0148

1701-0149

Czar

Czar

Savage

Savage

Imperial

Imperial

Savage Eclipse

Savage Eclipse


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

810

DESCRIPTION PART # DIA. HUB DIA. OEM # SUG. RETAILFRONT ROTORSFor 00-10 H-D (except 08-10 Dressers, FXSTS/SB, V-Rod, 06-10 Dyna Glide) DS-325091 11.5” 21/4” c/b 44156-00, 44136-00 $129.95For 84-99 H-D (except FXSTSB) DS-325738 11.5” 2” c/b 44136-84A, 44136-92 129.95REAR ROTORSFor 00-10 Big Twin (except 08-10 Dressers), 00-10 XL DS-325092 11.5” 21/4” c/b 41797-00 129.95For 92-99 FXST, FLST, FXD, FXDL, FXDWG, FXDB-D, FXDC, XL, 92-94 FXR, FXRS, FXRT DS-325739 11.5” 2” c/b 41789-92 129.95For 86-91 XL, 84-91 FX, FXST, FXWG, FLST, 84-91 FXR, FXRS, FXRT 91, FXDB-S DS-325734 11.5” 2” c/s 41791-79A 129.95

POLISHED STAINLESS STEEL DRILLED BRAKE ROTORS•Available for most models at an affordable price•Drilled for better heat dissipation and faster braking in wet weather•Designed for use with OEM and most aftermarket calipers; sold each

NOTE: c/b = counter bore mounting holes, c/s = counter sunk mounting holes.

FRONT ROTORS

FRONT ROTORS

REAR ROTORS

CUSTOM STAINLESS STEEL ROTORS•Fit standard five-bolt flanges•All measure 11.5” in diameter•Available in wide band or narrow band•Wide band style is for use with OEM-style calipers•Narrow band is for use with smaller aftermarket calipers

•Narrow-band brake pad swept area is 1.5” wide•Front rotors are 5mm (0.2”) thick; rear rotors are 6mm (0.24”) thick

•Sold each

FLOATING ROTORS•Floating rotors provide better braking, improved brake alignment, no rotor distortion, reduced chance of rotor cracking and stylish looks

•Unique low carbon rotors feature polished chrome carriers•Available in standard 111/2” rotors which bolt on with no modifications and utilize standard H-D calipers

1710-0149 1710-0142 1710-0144

DS-325738

DESCRIPTION STYLE WIDE BAND SUG. RETAIL NARROW BAND SUG. RETAILFor all 00-10 models (except Springers, V-Rod, 06-10 Dyna Glide, Solid 1710-0149 $104.95 1710-0139 $104.95 08-10 FLHT, FLHR, FLHX and FLTR) 5-button, floating 1710-0151 187.95 1710-0141 187.95

5-button, floating Contour 1710-0153 187.95 1710-0143 187.95For 84-99 models (except FXSTSB) Solid 1710-0148 104.95 1710-0138 104.95

5-button, floating 1710-0150 187.95 1710-0140 187.955-button, floating Contour 1710-0152 187.95 1710-0142 187.95

For 08-10 VRSCAW (spoke wheel), 07 VRSCX 5-button, floating Contour 1710-0915 234.95 - -

DESCRIPTION STYLE WIDE BAND SUG. RETAIL NARROW BAND SUG. RETAILFor all 00-10 models (except V-Rod, 08-10 FLHT, FLHR, FLHX and FLTR) 10-button, floating 1710-0157 $207.95 1710-0147 $207.95

10-button, floating Contour 1710-0155 207.95 1710-0145 207.95For 92-99 models (except FLT) 10-button, floating 1710-0156 207.95 1710-0146 207.95

10-button, floating Contour 1710-0154 207.95 1710-0144 207.95

DESCRIPTION FRONT LEFT PART # SUG. RETAIL FRONT RIGHT PART # SUG. RETAILAll 00-10 models (except Springers, V-Rod, 06-10 Dyna Glide, 08-10 FLHT/FLHR/FLHX/FLTR) MD512LS $225.95 MD512RS $225.95All 84-99 models (except FXSTSB) MD506LS 211.95 MD506RS 211.95All 06-10 V-Rod (w/ spoke wheels) 1710-0914 234.95 1710-0914 234.95All 02-05 V-Rod 1710-0199 225.95 1710-0200 225.95All 94-02 Buell (except Blast, 00-02 M2/X1) - - MD719RS 225.95 REAR ROTORSDESCRIPTION PART # SUG. RETAILAll 00-10 models (except V-Rod, 08-10 FLHT/FLHR/FLTR/FLHX) 1710-0198 $225.95All L87-99 models MD508SKR 217.95All 02-05 V-Rod 1710-02011 157.95All 00-10 XL883/1200 1710-0197 225.95All 94-02 Buell (except Blast) MD511 157.951 Non-floating rotor.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

811

PART # DESCRIPTION SUG. RETAILFIVE-SHOT DESIGNDS-325018 Left/right front, 00-10 H-D (except FLSTS and FXSTS V-Rod, 08-10 Dresser,

06-10 Dyna Glide) (11.5”) $205.95DS-325041 Left/right front, 84-99 H-D (except FXSTSB) (11.5”) 205.95DS-325019 Right rear, 00-10 Big Twin (except 08-10 Dressers, left rear 00-10 XL (11.5”) 205.95DS-325046 Right rear, 92-99 Big Twin ( except FLT/FLHT) left rear,92-99 XL (11.5”) 205.95DS-325042 Right rear, 84-91 Big Twin (except FLH/FLT/FLHT), left rear, 86-91 XL (11.5”) 205.95

PRO POLISH STAINLESS STEEL BRAKE ROTORS•Highly rust-resistant 420 stainless steel•Features the E.F.S.™ process that produces a mirror-like finish•Disc flatness held to one lightband (.0000116”) and finished to within one micro inch or less for zero runout


PART # DESCRIPTION SUG. RETAILFOR 84-10 MODELS (EXCEPT 08-10 DRESSERS, V-ROD, SPRINGER, 06-10 DYNA GLIDE AND 86-99 FLT REAR)1710-0283 Left front rotor $209.951710-0284 Right front rotor 209.95

STAINLESS STEEL 111/2” BRAKE ROTORS•Polished, stainless steel front brake rotors include adapter to fit 84-10 models (except those listed below)


FITS MODEL STANDARD SUG. RETAIL FLOATING SUG. RETAIL DIA. HUB. DIA. OEM #For 00-10 H-D (except FXSTS/FLSTS, V-Rod, 06-10 Dyna, 08-10 Dresser) DS-325016 $111.95 1710-0001 $191.95 11.5” 21/4” 44136-00/44156-00For 84-99 H-D (except FXSTSB) DS-325410 107.95 DS-325049 175.95 11.5” 2” 44136-84A, 44136-92

FRONT

REARFITS MODEL STANDARD SUG. RETAIL FLOATING SUG. RETAIL DIA. HUB DIA. OEM #For 00-10 H-D (except 08-10 Dresser, V-Rod) DS-325017 $111.95 1710-0002 $193.95 11.5” 21/4” 41797-00For 92-99 FX, FXST, FXWG and FLST DS-325424 111.95 DS-325047 183.95 11.5” 2” 41789-92For 92-94 FXR, FXRS and FXRT DS-325424 111.95 DS-325047 183.95 11.5” 2” 41789-92For 92-99 FXDB-D, FXDC, FXDL and FXDWG DS-325424 111.95 DS-325047 183.95 11.5” 2” 41789-92For 81-91 FX, FXST, FXWG and FLST DS-325411 111.95 DS-325048 173.95 11.5” 2” 41791-79AFor 82-91 FXR, FXRS and FXRT DS-325411 111.95 DS-325048 173.95 11.5” 2” 41791-79AFor 91 FXDB-S DS-325411 111.95 DS-325048 173.95 11.5” 2” 41791-79AFor 92-99 XL DS-325424 111.95 DS-325047 183.95 11.5” 2” 44136-92For 79-91 XL DS-325411 111.95 - - 11.5” 2” 41791-79A

STAINLESS STEEL BRAKE ROTORS•Available in standard or floating designs that deliver optimum braking efficiency with maximum heat dissipation•Floating design features a bright, flash-plated carrier•Manufactured from SVS420JZ, a highly rust-resistant stainless steel material compatible with all types of disc brake pads (including sintered pads)•High-frequency induction hardening, o.d. trueing and tempering prior to final surface grinding•Computer-controlled process guarantees quality control and precise dimensions•Made in the U.S.A.

DS-325406

DS-325410 DS-325049DS-325411

1710-0284


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

BRAKE ROTORS•Superior materials provide unmatched friction, feel and heat dissipation

•Extensive racing experience combined with cutting-edge technology provides superior brake systems

•CAD/CAM laser process produces exceptionally light and stress-free rotors•Each rotor is heat-treated according to its mass, thickness and targeted use•Diamond surface finish is applied for perfect symmetry, flatness and balance•Efficient design utilizes all the brake pads’ surface evenly and eliminates lightening holes to add strength

•Shape allows them to expand and contract without warping as they heat up•Provide maximum stopping power while remaining perfectly flat•Design is covered by an international license•Sold each

NOTE: These rotors are legal replacements for all CCS Superbike and Supersport classes and all WERA Superbike and Superstock classes. They weigh from 1/2 to 1 pound less per rotor than stock rotors.

NOTE: PART #STX42D has countersunk mounting holes.

812

PART # DESCRIPTION SUG. RETAILFRONTDS-326640 For 00-10 models, left side (except Springers,

V-Rod, 06-10 Dyna Glide, 08-10 Dressers) $127.95DS-325675 For 84-99 models, left side (except models

w/ floating rotors) 127.95

PART # DESCRIPTION SUG. RETAILREARDS-326641 For 00-10 models (except 08-10 Dressers) $127.95DS-325758 For 92-99 models (except FLT/FLHT, XL models) 127.95DS-325701 For 84-91 models (except FLT/FLHT, XL models) 127.95

POLISHED STAINLESS STEEL ROTORS•Highly polished 11.5” rotors with directional holes


DESCRIPTION PART # SUG. RETAILFRONTFor 03 XB9R Firebolt 1710-02691 $351.95For 03 XB9S Lightning 1710-02691 351.95For 05-07 XB9SX Lightning City X 1710-02691 351.95For 98-02 M2-S1-S3-S3T STX42D 306.90For 99-02 X1 Lightning STX42D 306.90For 04-07 XB12R Firebolt 1710-02691 351.95For 04-07 XB12S Lightning 1710-02691 351.95For 06-07 XB12X Ulysses 1710-02691 351.95For 06 XBRR 1710-02691 351.95

DESCRIPTION PART # SUG. RETAILREARFor 03 XB9R Firebolt 1710-0006 $159.95For 03 XB9S Lightning 1710-0006 159.95For 05-07 XB9SX Lightning City X 1710-0006 159.95For 04-07 XB12R Firebolt 1710-0006 159.95For 04-07 XB12S Lightning 1710-0006 159.95For 06-07 XB12X Ulysses 1710-0006 159.95For 06 XBRR 1710-0006 159.951 Floating design.

DESCRIPTIONOMEGA CHROME

OMEGABLACK

GEMINICHROME

GEMINIBLACK

TRIANGULUMCHROME

TRIANGULUM BLACK SUG. RETAIL

FOR 00-10 MODELS (EXCEPT 08-10 DRESSERS, V-ROD, SPRINGERS, 06-10 DYNA GLIDE FRONT)11.5” rotor, front 1710-0586 1710-0587 1710-0588 1710-0589 1710-0590 1710-0591 $369.9511.5” rotor, rear 1710-0592 1710-0593 1710-0594 1710-0595 1710-0596 1710-0597 369.95FOR 08-10 FLHT, FLHR, FLHX, FLTR MODELS, 06-10 DYNA MODELS (FRONT ONLY)11.8” rotor, front 1710-0598 1710-0599 1710-0600 1710-0601 1710-0602 1710-0603 369.9511.8” rotor, rear 1710-0604 1710-0605 1710-0606 1710-0607 1710-0608 1710-0609 369.95

LUG-DRIVE BRAKE ROTORS•Friction ring is CNC-machined from 420 high-carbon steel and fits flush with the CNC-machined 6061 T-6 billet aluminum carrier for the clean, uninterrupted look of a solid rotor with the performance of LRB’s line of full-floating, high-performance rotors

•Available with chrome-plated or black anodized carrier•For best results, use Lyndall Racing brake pads; see pages 833-834•Sold each•Made in the U.S.A.

1710-0006 STX42D

DS-325675 DS-325758

Omega Chrome Omega Black Omega BlackBack view

Gemini Chrome Gemini Black

TriangulumChrome

TriangulumBlack


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

813

J-SIX AND J-FOUR FRONT BRAKE CALIPERS•Machined from billet aluminum with a chrome or black finish

•Direct bolt-on to 84-07 Harley front applications (except Springer, 06-07 Dyna, V-Rod, and 04-07 XL models)

•Both J-Six and J-Four feature progressively sized pistons for smooth and even stopping power

•Made in the U.S.A. with domestic materials

1701-0131

1701-0135

1701-0130

DS-325250

DS-325252 DS-325253


RETAILFOR 84-99 MODELSDS-325252 Left hand;

radial, chrome $399.95DS-325253 Right hand;

radial, chrome 399.95REPLACEMENT BRAKE PADS1702-0056 Caliper rebuild kit 30.951721-0888 Repl. brake pads (pr.) 52.95


RETAILFOR 00-07 MODELS1701-0129 Left hand; smooth, black $399.951701-0130 Left hand; smooth, chrome 399.95DS-325846 Left hand; radial, chrome 399.951701-0131 Right hand; smooth, black 399.951701-0132 Right hand; smooth, chrome 399.95FOR 84-99 MODELS1701-0133 Left hand; smooth, black 399.95DS-325250 Left hand; smooth, chrome 399.95


RETAILFOR 84-99 MODELS (CONT)1701-0134 Right hand; smooth, black $399.951701-0135 Right hand; smooth, chrome 399.95DS-325251 Right hand; radial, chrome 399.95REPLACEMENT COMPONENTSDS-243461 Caliper rebuild kit 24.951721-1201 11” repl. brake pads (pr.) 51.951721-0887 Repl. brake pads (pr.) 52.95

6-PISTON4-PISTON

J-SIX EXTREME FRONT BRAKE CALIPERS•Machined from billet aluminum•Body is formed around piston edges to highlight the differential bore sizes

•Progressively sized pistons provide smooth and even stopping power

•Direct bolt-on design•Made in the U.S.A. with domestic materials

PART # DESCRIPTION SUG. RETAIL11.5” ROTORFOR 00-07 FLST, FSXT (EXCEPT SPRINGERS, 06-07 V-ROD, 04-07 XL), 00-05 FXD, 00-07 FLHR, FLHT, FLHX, FLTR, 00-03 XL1701-0329 Left hand, polished $379.951701-0335 Right hand, polished 379.951701-0330 Left hand, chrome 399.951701-0336 Right hand, chrome 399.951701-0331 Left hand, black 399.951701-0337 Right hand, black 399.95

PART # DESCRIPTION SUG. RETAIL13” ROTORFOR 00-07 FLST, FSXT (EXCEPT SPRINGERS, 06-07 V-ROD, 04-07 XL), 00-05 FXD, 00-07 FLHR, FLHT, FLHX, FLTR, 00-03 XL1701-0353 Left hand, polished $389.951701-0354 Left hand, chrome 409.951701-0355 Left hand, black 409.95300MM ROTORFOR 08-10 FLHT, FLHR, FLHX, FLTR1701-0332 Left hand, polished 379.951701-0338 Right hand, polished 379.95

PART # DESCRIPTION SUG. RETAIL300MM ROTORFOR 08-10 FLHT, FLHR, FLHX, FLTR (CONT)1701-0333 Left hand, chrome $399.951701-0339 Right hand, chrome 399.951701-0334 Left hand, black 399.951701-0340 Right hand, black 399.95

J-SIX ULTRA FRONT BRAKE CALIPERS•Machined from billet aluminum and feature smooth face with bevel cut edges

•Progressively sized pistons provide smooth and even stopping power

•Direct bolt-on design•Made in the U.S.A. with domestic materials

1701-0329 1701-0331

PART # DESCRIPTION SUG. RETAIL11.5” ROTORFOR 00-07 FLST, FSXT (EXCEPT SPRINGERS, 06-07 V-ROD, 04-07 XL), 00-05 FXD, 00-07 FLHR, FLHT, FLHX, FLTR, 00-03 XL1701-0341 Left hand, polish $379.951701-0347 Right hand, polish 379.951701-0342 Left hand, chrome 399.951701-0348 Right hand, chrome 399.951701-0343 Left hand, black 399.951701-0349 Right hand, black 399.95

PART # DESCRIPTION SUG. RETAIL13” ROTORFOR 00-07 FLST, FSXT (EXCEPT SPRINGERS, 06-07 V-ROD, 04-07 XL), 00-05 FXD, 00-07 FLHR, FLHT, FLHX, FLTR, 00-03 XL1701-0356 Left hand, polish $389.951701-0357 Left hand, chrome 409.951701-0358 Left hand, black 409.95300MM ROTORFOR 08-10 FLHT, FLHR, FLHX, FLTR1701-0344 Left hand, polish 379.95

PART # DESCRIPTION SUG. RETAIL300MM ROTORFOR 08-10 FLHT, FLHR, FLHX, FLTR (CONT)1701-0350 Right hand, polish $379.951701-0345 Left hand, chrome 399.951701-0351 Right hand, chrome 399.951701-0346 Left hand, black 399.951701-0352 Right hand, black 399.95

1701-03411701-0343

1701-03421701-0342


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

J-FOUR TRANZBRAKE•Rear brake system mounted onto right side drive transmissions; eliminates need for a rear rotor

•Direct bolt-on application is designed to hook up without the need to change any seals or do any machining on the transmission

•4-piston differential bore•Brake system contains integrated Jaybrake caliper, stainless steel hardware, and 23-tooth sprocket mounted to a heat-treated stainless steel rotor

•Requires the use of a hydraulic clutch master cylinder (sold separately)

•Looks great and cleans up the rear tire especially when running custom rims

•Made in the U.S.A. with domestic materials

814

PART # DESCRIPTION SUG. RETAILFOR MOST BAKER BILLET-CASE RSD TRANSMISSIONS (EXCEPT TORQUE BOX, DD5/DD6 AND DSSC TRANSMISSIONS)1704-0249 Chrome Tranzbrake $1,897.951704-0250 Polished Tranzbrake 1,797.95FOR MOST CAST-CASE RSD TRANSMISSIONS FROM BAKER, AND JIMS1704-0251 Chrome Tranzbrake 1,897.95

PART # DESCRIPTION SUG. RETAILFOR MOST CAST-CASE RSD TRANSMISSIONS FROM BAKER, AND JIMS (CONT)1704-0252 Polished Tranzbrake $1,797.95REPLACEMENT COMPONENTS1704-0247 Caliper rebuild kit 24.951704-0248 Slave cylinder rebuild kit 15.951721-0756 Repl. brake pads 52.95

PART # DESCRIPTION SUG. RETAILFOR 2-PISTON CALIPERS (FRONT LEFT WITH 111/2” ROTOR)1704-0220 For 84-99 models (except Springers), black $104.951704-0221 For 84-99 models (except Springers), chrome 104.951704-0222 For 84-99 models (except Springers), polished 81.95FOR 4-PISTON QUAD-SERIES CALIPERS (FRONT LEFT WITH 111/2” ROTOR)1704-0235 For 00-07 models (except Springers, 06-07 Dyna,

04-07 XL, V-Rod), black 115.951704-0236 For 00-07 models (except Springers, 06-07 Dyna,

04-07 XL, V-Rod), chrome 115.951704-0237 For 00-07 models (except Springers, 06-07 Dyna,

04-07 XL, V-Rod), polished 92.95FOR 4-PISTON QUAD-SERIES CALIPERS WITH EARS (FRONT LEFT WITH 111/2” ROTOR)1704-0238 For 84-99 models (except Springers), black 115.951704-0239 For 84-99 models (except Springers), chrome 115.951704-0240 For 84-99 models (except Springers), polished 92.95

PART # DESCRIPTION SUG. RETAILFOR 4-PISTON QUAD-SERIES CALIPERS WITH EARS (REAR RIGHT)1704-0223 For 00-05 FXST, 00-07 FLST (except 07 FLSTF); black $115.951704-0224 For 00-05 FXST, 00-07 FLST (except 07 FLSTF); chrome 115.951704-0225 For 00-05 FXST, 00-07 FLST (except 07 FLSTF); polished 92.951704-0232 For L87-99 FXST; black 115.951704-0233 For L87-99 FXST; chrome 115.951704-0234 For L87-99 FXST; polished 92.951704-0231 For 87-94, 99-00 FXR; black 115.951704-0241 For 87-94, 99-00 FXR; chrome 115.951704-0242 For 87-94, 99-00 FXR; polished 92.95FOR 4-PISTON QUAD-SERIES CALIPERS WITH EARS (REAR CUSTOM APPLICATION, 3/4” AXLE, LEFT OR RIGHT)1704-0226 For 10” rotor; black 115.951704-0227 For 10” rotor; chrome 115.951704-0228 For 10” rotor; polished 92.951704-0229 For 111/2” rotor; chrome 115.951704-0230 For 111/2” rotor; polished 92.95

PART # DESCRIPTION SUG. RETAIL2-PISTON (FRONT)1701-0136 Black $240.951701-0137 Chrome 240.951701-0138 Polished 202.954-PISTON QUAD-SERIES, SMOOTH (FRONT)1701-0325 Black 323.951701-0324 Chrome 323.951701-0323 Polished 284.954-PISTON QUAD-SERIES, SMOOTH (REAR)1701-0328 Black 323.95

PART # DESCRIPTION SUG. RETAIL4-PISTON QUAD-SERIES, SMOOTH (REAR) (CONT)1701-0327 Chrome $323.951701-0326 Polished 284.954-PISTON QUAD-SERIES (FRONT)1701-0139 Black 323.951701-0140 Chrome 323.951701-0141 Polished 284.954-PISTON QUAD-SERIES WITH EARS (REAR)1701-0142 Black 323.951701-0143 Chrome 323.95

PART # DESCRIPTION SUG. RETAIL4-PISTON QUAD-SERIES WITH EARS (REAR) (CONT)1701-0144 Polished $284.95REBUILD KITS1702-0054 2-piston 18.95DS-243462 Quad 4-piston 22.95REPLACEMENT BRAKE PADS1721-0889 2-piston and Quad

4-piston repl. pads (pr.) 31.95

CALIPER BRACKETS

CALIPERS

2- AND 4-PISTON CALIPERS/CALIPER BRACKETS•Calipers machined from billet aluminum with equal-sized pistons

•Require brackets for mounting (all hardware included)•Available in black-anodized, chrome or polished finish•Calipers and brackets must be purchased separately•Made in the U.S.A. with domestic materials

1701-0138

1701-0140

1701-0142

1704-0220

1704-0222

1704-0235

1704-02401704-0232

1704-0228

1704-0249

1704-0247

1704-0248

1704-0250


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

815

PART # DESCRIPTION SUG. RETAILFOR 00-05 FXD, FXDX, FXDS, FXDL, FXDWG, 00-07 FXST, FXSTD, FXSTB,00-07 FLST, FLHT, FLTR, FLT, FLHR, FLHX, 00-03 XL XLH AND02-05 VRSC (EXCEPT STREET ROD)1701-0091 Chrome, left caliper $499.951701-0092 Chrome, right caliper 499.951701-0303 Contrast Cut, left caliper 499.951701-0304 Contrast Cut, right caliper 499.95FOR 84-99 FLST EXCEPT FLSTS, 84-99 FXST EXCEPT FXSTS, 84-99 FXR,FXD, FXDWG (EXCEPT MODELS W/ WIRE WHEELS), 84-99 FLH, FLT, FLHR,84-99 XL AND XLH (EXCEPT XLH MODELS W/ WIRE WHEELS)1701-0095 Chrome, left caliper 499.951701-0096 Chrome, right caliper 499.951701-0299 Contrast Cut, left caliper 499.951701-0300 Contrast Cut, right caliper 499.951702-0053 Caliper rebuild kit 13.95

PART # DESCRIPTION SUG. RETAILFOR 00-05 FXD, FXDX, FXDS, FXDL, FXDWG, 00-07 FXST, FXSTD, FXSTB,00-07 FLST, FLHT, FLTR, FLT, FLHR, FLHX, 00-03 XL XLH AND02-05 VRSC W/ 13” ROTORS (EXCEPT STREET ROD)1701-0093 Chrome, left caliper $499.951701-0094 Chrome, right caliper 499.951701-0305 Contrast Cut, left caliper 499.951701-0306 Contrast Cut, right caliper 499.95FOR 84-99 FLST EXCEPT FLSTS, 84-99 FXST EXCEPT FXSTS, 84-99 FXR,FXD, FXDWG (EXCEPT MODELS W/ WIRE WHEELS), 84-99 FLH, FLT, FLHR,84-99 XL AND XLH (EXCEPT XLH MODELS W/ WIRE WHEELS)1701-0097 Chrome, left caliper 499.951701-0098 Chrome, right caliper 499.951701-0301 Contrast Cut, left caliper 499.951701-0302 Contrast Cut, right caliper 499.951702-0053 Caliper rebuild kit 13.95

CHROME SIX-PISTON FRONT CALIPERS•Designed for 11.5” disc or 13” disc applications on most 84-07 models•Dual-disc applications require a left and right caliper•Work with stock or Performance Machine rotors•Include brake pads•Made in the U.S.A.

FOR USE WITH 11.5” ROTORS (112 X 6B CALIPERS)

FRONT (137 X 4B CALIPERS)

REPLACEMENT PARTS

FOR USE WITH 13” ROTORS (112 X 6B CALIPERS)

PART NO. SUG. RETAILFRONTDS-324608 $399.95DS-324609 449.95DS-324612 449.95DS-325987 399.95DS-325988 449.95DS-325990 399.95

PART NO. SUG. RETAILFRONT (CONT)DS-325997 $449.951701-0309 449.951701-0310 449.951701-0311 449.951701-0312 449.95

PART NO. SUG. RETAILREARDS-324131 $499.95DS-324132 549.95DS-324134 499.95DS-324135 549.951701-0099 549.951701-0313 549.95

PART NO. SUG. RETAILREAR (CONT)1701-0317 $549.951701-0319 549.951701-0321 549.95

DESCRIPTION CHROME POLISHED CONTRAST CUTFOR ALL 00-07 (EXCEPT 06-07 DYNA GLIDE, 06-07 V-ROD, FLSTS/FXSTS, 04-07 XL)Left caliper DS-324609 DS-324608 1701-0311Right caliper DS-324612 - 1701-0312FOR 84-99 FXR/FXD/FXWG/XL/XLH/XR1000 (EXCEPT MODELS W/ WIRE WHEELS); 84-99 FXST (EXCEPT FXSTS/FXSTSB); 86-99 FLST (EXCEPT FLSTS); 84-99 FLT/FLHT/FLHR/FLTR W/ 11.5” ROTORSLeft caliper DS-325988 DS-325987 1701-0309Right caliper DS-325997 DS-325990 1701-0310

REAR (137 X 4B CALIPERS)

MODEL & YEAR CHROME POLISHED CONTRAST CUTFor 08-10 FXSTB, FXSTC, FLSTF - - 1701-0313For 06-07 FXST, FXSTB, FXSTS, 07 FLSTF models 1701-0099 - 1701-0321For 00-05 FXST/C; 00-07 FLST/C/ N/F (except 07 FLSTF) DS-324132 DS-324131 1701-0319For 87-99 FXST/C; FLST/C/N/F DS-324135 DS-324134 1701-0317

DESCRIPTIONPM REFERENCE PART # DRAG PART # SUG. RETAIL

Brake pads for front calipers - 1721-0229 $32.95Brake pads for rear calipers - FA244HH 36.95Piston 1.125” x .750” (0051-1401) DS-325993 7.95Piston 1.375” x .750” (0053-1401) DS-325994 7.95

DESCRIPTIONPM REFERENCE PART # DRAG PART # SUG. RETAIL

Rebuild kit (rubber parts) (0053-3903) DS-325995 $12.95Brake pad cotter pin (0075-0012) DS-325081 .953/8” shim kit (0019-9001) DS-325083 4.95

CHROME DIFFERENTIAL-BORE FOUR-PISTON CALIPERS•Calipers have differential bore pistons with dual-pad design

•Differential bore pistons apply different forces at both the leading and the trailing edges of the pad to ensure long life

•Dual-disc applications require a left and right caliper•Designed for 11.5” disc applications on most 84-07 models

•Include brake pads•Made in the U.S.A.

1701-0092

DS-324609 DS-324608

DS-324132

DS-324612

DS-325988

1701-00951701-0299

1701-0311

1701-0321

PRICE LIST


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

816

DESCRIPTION CHROME CONTRAST CUT SUG. RETAILFOR 08-10 FLHR/FLHRC/FLHT/FLHTC/FLHCU/FLHX (125 X 4B CALIPER)Left caliper 1701-0182 1701-0307 $449.95Right caliper 1701-0181 1701-0308 449.95

DESCRIPTION CHROME CONTRAST CUT SUG. RETAILFOR 08-10 VRSCD/VRSCDX/VRSCAW (125 X 4B CALIPER)Left caliper 1701-0182 1701-0307 $449.95Right caliper 1701-0181 1701-0308 449.95

FOUR-PISTON CALIPERS FOR 300MM ROTORS•Smaller volume calipers for use with stock brake master cylinder with 15mm piston on listed models•Precision-machined from billet aluminum with a chrome or Contrast Cut™ finish•Contrast Cut finish starts with a polished caliper that has been black anodized then recut to open up the design

•Designed for 11.8” (300mm) front disc applications with or without ABS•Made in the U.S.A.

FRONT CALIPERS

REAR CALIPERS

DESCRIPTION CHROME POLISHEDFOR 84-99 FXR, FXD, XL, XLH, XR1000 (EXCEPT MODELS W/ WIRE WHEELS); 84-99 FXST (EXCEPT FXSTS, FXSTSB); 86-99 FLST (EXCEPT FLSTS) W/ 11.5” ROTORS (125 X 4R CALIPER)Single disc DS-325100 DS-325051Dual disc DS-325101 DS-325053FOR 84-99 FXR, FXD AND XLH EQUIPPED W/ STOCK OR CUSTOM WIRE SPOKE WHEEL W/ 11.5” ROTORS (125 X 4SL CALIPER)Single disc DS-325103 DS-325055Dual disc DS-325104 -

DESCRIPTION CHROME POLISHEDFOR 88-99 FXSTS, FXSTSB W/ 11.5” ROTORS (125 X 4S CALIPER)Single disc DS-325102 DS-325059FOR 00-07 FXSTS, FXSTSB W/ 11.5” ROTORS (125 X 4S CALIPER)Single disc 1701-0041 1701-0042

CLASSIC CALIPER KITS•The number one name in custom brake calipers

•Precision-machined from billet aluminum

•Calipers are four-piston, dual-action design for positive stopping power

•Available in front and rear kits (pads included)


NOTE: For replacement brake pads refer to the brake pad pages later in this section.

DS-325100

DS-325461 DS-325124

DS-324603

DS-324606

1701-0101

DS-325102

1701-0181

1701-0316

1701-0115

DESCRIPTION CHROME POLISHED CONTRAST CUTFOR 00-05 FXST, 00-07 FLST MODELS (EXCEPT 07 FLSTF) (125 X 4R CALIPER)11.5” rotor DS-324603 - -FOR 08-10 DYNA11.5” rotor - - 1701-0316FOR 06-07 FXD MODELS (125 X 4R CALIPER)11.5” rotor 1701-0101 - 1701-0322FOR 00-05 DYNA MODELS (125 X 4R CALIPER)11.5” rotor DS-324606 - 1701-0318

DESCRIPTION CHROME POLISHED CONTRAST CUTFOR 08-10 FLHT, FLHR, FLHX, FLTR MODELS (137 X 4B CALIPER)11.8” rotor (OEM) - - 1701-031411.8” rotor (PM) - - 1701-0315FOR 02-07 FLHT, FLHR, FLHX, FLTR MODELS (137 X 4B CALIPER)11.5” rotor 1701-0115 - 1701-0320FOR 84-99 FLT, FLTR, FLHT/C, FLHS, FLHR MODELS (137 X 4 CALIPER)11.5” rotor DS-325461 - -FOR 87-99 FXST, FXSTC, FXSTS, FXSTSB, FLST, FLSTC, FLSTF, FLSTN, FLSTS (125 X 4R CALIPER)11.5” rotor DS-325124 DS-325067 -


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

817

PART # DESCRIPTION SUG. RETAIL1701-0123 Polished 4-piston caliper (125 x 4S ) $302.951701-0122 Chrome 4-piston caliper (125 x 4S) 334.951701-0104 Polished 4-piston caliper (125 x 4R) 302.951701-0103 Chrome 4-piston caliper (125 x 4R) 334.95DS-325078 Caliper rebuild kit (4-piston calipers) 12.951702-0053 Caliper rebuild kit (6-piston calipers) 13.95DS-325079 Clevis pin (4-piston calipers) 1.95DS-325080 Anti-rattle spring (4-piston calipers) 3.95

PART # DESCRIPTION SUG. RETAILDS-325081 Cotter pin (front calipers) $.95DS-325082 Brake pad pin (2-piston calipers) .95DS-325083 Caliper mount shim kit (3/8”) 4.95DS-325084 Caliper mount shim kit (5/16”) 4.95DS-325085 Brake pad clevis pin (sold each; 2 required)

(4-piston calipers) 1.95DS-325086 Anti-rattle spring (sold each; 2 required)

(2-piston calipers) 4.95

PERFORMANCE MACHINE REPLACEMENT COMPONENTS

PART # SUG. RETAILFRONTDS-325051 $349.95DS-325053 699.95DS-325055 349.95DS-325059 417.95DS-325100 399.95DS-325101 799.95DS-325102 484.95DS-325103 399.95

PART # SUG. RETAILFRONT (CONT)DS-325104 $799.951701-0041 488.951701-0042 417.95REARDS-324603 499.95DS-324606 499.95DS-325067 449.95DS-325069 449.95

PART # SUG. RETAILREAR (CONT)DS-325077 $376.95DS-325095 376.95DS-325108 442.95DS-325109 442.95DS-325123 499.95DS-325124 499.95DS-325125 499.95DS-325461 549.95

PART # SUG. RETAILREAR (CONT)DS-325767 $442.95DS-325768 474.95DS-325798 442.95DS-325799 474.951701-0055 449.951701-0056 499.951701-0101 499.951701-0115 549.95

PART # SUG. RETAILREAR (CONT)1701-0145 $549.951701-0146 549.951701-0314 549.951701-0315 549.951701-0316 499.951701-0318 499.951701-0320 549.951701-0322 499.95

REAR CALIPERS (CONT)

CLASSIC CALIPER KITS (CONT)

DS-325768

DS-325123

DS-325108

1701-0056

DS-325109

1701-0146

DS-325125

PRICE LIST

1701-0122

1701-01031702-0053

DESCRIPTION CHROME POLISHED CONTRAST CUTFOR 84-85 FXR, FXRS, FXRT; 86-92 FXRT; 86 FXWG; 86-94 FXR, FXRS (125 X 4R CALIPER)11.5” rotor DS-325123 DS-325069 -FOR 91-99 FXDB, FXD, FXDC, FXDL, FXDWG (125 X 4R CALIPER)11.5” rotor DS-325125 - -FOR 84-86 FXST, FXSTC (125 X 4RSPH CALIPER)11.5” rotor DS-325109 DS-325095 -FOR 08-09 VRSC (137 X 4B CALIPER)11.5” rotor - - 1701-031411.8” rotor - - 1701-0315FOR 07 VRSC (125 X 4R CALIPER)11.5” rotor 1701-0146 - -

DESCRIPTION CHROME POLISHED CONTRAST CUTFOR 05-06 VRSCA/B/D (137 X 4B CALIPER)11.5” rotor 1701-0115 - -FOR 02-04 VRSCA/B (125 X 4R CALIPER)11.5” rotor 1701-0145 - -FOR 84-99 XL, XLH, XLS (125 X 4RSPH CALIPER)11.5” rotor DS-325108 DS-325077 -FOR RIGID FRAMES/CUSTOM APPLICATIONS (125 X 4R CALIPER)10” rotor DS-325768 DS-325767 -FOR RIGID FRAMES/CUSTOM APPLICATIONS (125 X 4R CALIPER)11.5” rotor; 3/4” axle DS-325799 DS-325798 -11.5” rotor; 1” axle 1701-0056 1701-0055 -


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

818

2-PISTON FRONT BRAKE CALIPERS•Billet aluminum with a smooth or classic “fin” design in a choice of three finishes: clear anodized, chrome or black contrast

•All single-disc applications require a 5/8” bore master cylinder•All front dual-disc applications require the factory 11/16” bore (84 and later) or the GMA 3/4” handlebar master cylinder

•Brake pads included•Made in the U.S.A.

NOTE: Not recommended for use with imported stainless steel rotors.

NOTE: When installing new calipers, always check spoke-to-caliper clearance.

PART # DESCRIPTION SUG. RETAILREAR CALIPERS FOR 00-07 FLHR, FLHT AND FLTR MODELS (M-CALIPER)1701-0211 Smooth black $416.951701-0212 Smooth chrome 575.95

PART # DESCRIPTION SUG. RETAILFRONT SINGLE-DISC CALIPER1701-0273 Smooth black $341.951701-0274 Smooth chrome 467.95FRONT DUAL-DISC CALIPERS1701-0275 Smooth black 680.951701-0276 Smooth chrome 938.95REAR CALIPERS1701-0283 Smooth black 357.951701-0284 Smooth chrome 476.95

MILLENIUM SERIES 4-PISTON CALIPERS•6061 T-6S aluminum construction with a smooth or classic design

•Billet aluminum with a smooth or classic “fin” design in a choice of three finishes: clear anodized, chrome or black contrast


PART # DESCRIPTION SUG. RETAILFOR 88-06 FXSTS (EXCEPT FXSTSB) (SINGLE DISC) (B-CALIPER)1701-0243 Classic clear anodized $315.951701-0244 Classic black contrast 315.951701-0245 Classic chrome 434.951701-0246 Smooth black 315.951701-0247 Smooth chrome 434.95FOR 84-99 FXR, FXST, FLST, FXD, FXWG AND XL (SINGLE DISC) (B-CALIPER)1701-0228 Classic clear anodized 315.951701-0229 Classic black contrast 315.951701-0230 Classic chrome 434.95

PART # DESCRIPTION SUG. RETAILFOR 84-99 FXR, FXST, FLST, FXD, FXWG AND XL (SINGLE DISC) (B-CALIPER) (CONT)1701-0231 Smooth black $315.951701-0232 Smooth chrome 434.95FOR 84-99 FXR, FXST, FLST, FXD, FXDWG AND XL W/ DUAL DISC AND 1-PIECE MOUNTING DESIGN (B-CALIPER)1701-0233 Classic clear anodized 619.951701-0234 Classic black contrast 619.951701-0235 Classic chrome 738.951701-0236 Smooth black 619.951701-0237 Smooth chrome 738.95

PART # DESCRIPTION SUG. RETAILFOR PAUGHCO CUSTOM SPRINGERS USING SINGLE FLANGE HUB WHEEL FROM 84-UP FXST AND FXWG MODELS (SINGLE DISC) (B-CALIPER)1701-0238 Classic clear anodized $385.951701-0239 Classic black contrast 385.951701-0240 Classic chrome 516.951701-0241 Smooth black 385.951701-0242 Smooth chrome 516.95

2-PISTON

1701-0273 1701-0274 1701-0275 1701-0277

1701-0228

1701-0234

1701-0242

1701-0245

1701-0243

1701-0244

1701-0241

FRONT CALIPERS FOR 84-99 MODELS (EXCEPT SPRINGERS); REAR CALIPERS FOR 87-99 SOFTAIL MODELS (F-CALIPER)

FRONT CALIPERS FOR 00-07 MODELS (EXCEPT SPRINGERS, 04-07 XL); REAR CALIPERS FOR 00-05 FXST, 00-07 FLST MODELS (EXCEPT 07 FLSTF) (M-CALIPER)

PART # DESCRIPTION SUG. RETAILFRONT SINGLE DISC CALIPER1701-0277 Smooth black $340.951701-0278 Smooth chrome 456.95

PART # DESCRIPTION SUG. RETAILFRONT DUAL DISC CALIPERS1701-0279 Smooth black $680.951701-0280 Smooth chrome 938.95

1701-0230

1701-02111701-0280


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

819

REPLACEMENT GMA CALIPER COMPONENTSPART # DESCRIPTION SUG. RETAIL1720-0075 Repl. brake pads for “A” calipers (set of 2) $29.951720-0076 Repl. brake pads for “B” calipers (set of 2) 29.951720-0077 Repl. brake pads for “F” calipers (set of 4) 48.951720-0078 Repl. brake pads for “M” calipers (set of 2) 53.951720-0079 Repl. brake pads for “BP” calipers (set of 4) 59.951702-0058 Caliper pistons for front or rear “A” calipers (2-pk.) 23.95

PART # DESCRIPTION SUG. RETAIL1702-0059 Caliper pistons for front or rear “B” calipers (2-pk.) $23.951702-0060 Caliper pistons for “F” caliper (4-pk.) 38.951702-0061 Complete caliper O-ring/seal kit for 2-piston front

or rear caliper (except “F” calipers) 6.951702-0062 O-ring/seal kit for “F” calipers 12.95

2-PISTON CALIPERS

2-PISTON CUSTOM REAR CALIPERS•Billet aluminum with classic “fin” or smooth designs•Choice of three finishes: clear anodized, chrome or black contrast•Raw metal on black contrast calipers is anodized for a long-lasting high-quality finish•2-piston designs for various H-D models (including rigid frames)•Hanger brackets and brake pads included•Made in the U.S.A.

NOTE: The OLD-STYLE Wagner and Kelsey-Hayes (die-cast aluminum OEM) on rear applications have a 3/4” bore master cylinder and WILL NOT WORK CORRECTLY.

NOTE: Not recommended for use with imported stainless steel rotors.

NOTE: Requires use of 5/8” bore master cylinder.

1701-0268

1701-0255

1701-0199

1720-0075 1720-0076 1720-0077 1720-0078 1720-0079


RETAILFOR 86-99 FLHT/FLHR (A CALIPER)1701-0193 Classic clear anodized $315.951701-0194 Classic black contrast 315.951701-0195 Classic chrome 434.951701-0196 Smooth black 315.951701-0197 Smooth chrome 434.95FOR L87-99 FXST, FLST AND FXSTS (EXCEPT FXSTSB) (B CALIPER)1701-0253 Classic clear anodized 315.951701-0254 Classic black contrast 315.951701-0255 Classic chrome 434.951701-0256 Smooth black 315.951701-0257 Smooth chrome 434.95FOR 84-E87 FXST, FLST AND FXWG (B CALIPER)1701-0248 Classic clear anodized 315.95


RETAILFOR 84-E87 FXST, FLST AND FXWG (B CALIPER) (CONT)1701-0249 Classic black contrast $315.951701-0250 Classic chrome 434.951701-0251 Smooth black 315.951701-0252 Smooth chrome 434.95FOR 85-99 FXR (A CALIPER)1701-0198 Classic clear anodized 315.951701-0199 Classic black contrast 315.951701-0200 Classic chrome 434.951701-0201 Smooth black 315.951701-0202 Smooth chrome 434.95FOR RIGID FRAMES W/ 10” ROTOR, INCLUDES LINKAGE ROD (A CALIPER)1701-0213 Classic clear anodized 367.951701-0214 Classic black contrast 367.95


RETAILFOR RIGID FRAMES W/ 10” ROTOR, INCLUDES LINKAGE ROD (A CALIPER) (CONT)1701-0215 Classic chrome $506.951701-0216 Smooth black 367.951701-0217 Smooth chrome 506.95FOR L87-99 XL (B CALIPER)1701-0268 Classic clear anodized 315.951701-0269 Classic black contrast 315.951701-0270 Classic chrome 434.951701-0271 Smooth black 315.951701-0272 Smooth chrome 434.95FOR 86-E87 XL (B CALIPER)1701-0264 Classic black contrast 315.951701-0265 Classic chrome 434.951701-0266 Smooth black 315.95

1701-0271

1701-0215

1701-0250

1701-0200

1701-0195


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

820

PART # DESCRIPTION SUG. RETAILDS-324033 2-pad set $49.95

PART # DESCRIPTION SUG. RETAIL1721-0759 4-pad set $133.95

REPLACEMENT BRAKE PADS

BLACK REAR KITS WITH 11.8” ROTORS (2-PAD DESIGN, UNLESS NOTED)

BLACK FRONT KITS WITH 12.6” ROTOR

CHROME REAR KITS WITH 11.8” ROTORS (2-PAD DESIGN, UNLESS NOTED)

CHROME FRONT KITS WITH 12.6” ROTOR

PART # DESCRIPTION SUG. RETAIL1704-0263 For 08-10 FXST/FLST $872.951704-0268 For 00-05 FXST/ 00-07 FLST (except 07 FLSTF) 872.95

PART # DESCRIPTION SUG. RETAIL1704-02611 For 08-10 FLHT/FLHR/FLHX/FLTR $970.951704-0269 For 02-07 FLT/FLHT/FLHR/FLHX/FLTR 872.951 4-pad design.

PART # DESCRIPTION SUG. RETAIL00-10 FXST, FLST (EXCEPT SPRINGERS)/00-07 FLHT, FLHR, FLHX, FLTR/00-05 FXD, FXDWG W/ CAST OR BILLET WHEELS/00-03 XL W/ CAST OR BILLET WHEELS (2-PAD DESIGN)1704-0266 Left side $812.951704-0267 Right 812.95

PART # DESCRIPTION SUG. RETAIL08-10 FLHT/FLHR/FLHX/FLTR (4-PAD DESIGN)1704-0255 Left side $926.951704-0257 Right side 926.95

PART # DESCRIPTION SUG. RETAIL1704-0262 For 08-10 FXST/FLST $948.951704-0258 For 06-07 FXST/ 07 FLSTF 948.951704-0187 For 00-05 FXST/00-07 FLST (except 07 FLSTF) 948.951704-0201 For 87-99 FXST/FLST 948.951704-02601 For 08-10 FLHT/FLHR/FLHX/FLTR 1,039.95

PART # DESCRIPTION SUG. RETAIL1704-0190 For 02-07 FLT/FLHT/FLHR/FLHX/FLTR $948.951704-0191 For 02-05 VRSCA/B (V-Rod) 948.951704-0259 For 06-10 FXD/FXDWG 948.951704-0188 For 00-05 FXD/FXDWG 948.951704-0202 For 91-99 FXD/FXDWG 948.951 4-pad design.

PART # DESCRIPTION SUG. RETAIL00-10 FXST, FLST (EXCEPT SPRINGERS)/00-07 FLHT, FLHR, FLHX, FLTR/00-05 FXD, FXDWG W/ CAST OR BILLET WHEELS/00-03 XL W/ CAST OR BILLET WHEELS (2-PAD DESIGN)1704-0184 Left side $888.951704-0185 Right side 888.9588-06 FXSTS (2-PAD DESIGN)1704-0204 Right side 1,120.9584-99 FXST/FLST, 84-99 FLT/FLHT/FLHR, 93-99 FXDWG (2-PAD DESIGN)1704-0194 Left side 904.951704-0195 Right side 904.9508-10 FLHR, FLHX, FLTR, FLHT (4-PAD DESIGN)1704-0254 Left side 995.95

PART # DESCRIPTION SUG. RETAIL08-10 FLHR, FLHX, FLTR, FLHT (4-PAD DESIGN) (CONT)1704-0256 Right side $995.9502-05 VRSCA/B V-ROD (2-PAD DESIGN)1704-0192 Left side 888.951704-0193 Right side 888.9508-10 FXD/FXDWG (4-PAD DESIGN)1704-0264 Left side 995.951704-0265 Right side 995.9591-99 FXD, 87-99 XL MODELS WITH MAG WHEELS (2-PAD DESIGN)1704-0196 Left side 904.951704-0197 Right side 904.95

FOUR-PISTON DIFFERENTIAL-BORE CALIPER/ROTOR KITS•Kits feature Brembo calipers with pads and floating rotors•Front kits have 12.6” rotors; rear kits have 11.8” rotors•Replacement brake pads are available separately•Available in a chrome or black finish

NOTE: Dual-disc applications require the purchase of left and right sides, unless noted.

1704-01841704-0185

1704-0257

1704-01921704-0193

1704-0187


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

821

BLACK FRONT CALIPERS

CHROME REAR CALIPERS (2-PAD DESIGN)

CHROME FRONT CALIPERS

REPLACEMENT BRAKE PADS

BLACK REAR CALIPERS (2-PAD DESIGN)

PART # DESCRIPTION SUG. RETAIL00-10 FXST, FLST (EXCEPT SPRINGERS)/00-07 FLHT, FLHR, FLHX, FLTR/00-05 FXD, FXDWG W/ CAST OR BILLET WHEELS/00-03 XL W/ CAST OR BILLET WHEELS (2-PAD DESIGN)1701-0160 Left side $386.951701-0161 Right side 386.95

PART # DESCRIPTION SUG. RETAIL08-10 FLHR, FLHX, FLTR, FLHT (4-PAD DESIGN)1701-0155 Left side $501.951701-0157 Right side 501.95

PART # DESCRIPTION SUG. RETAIL1701-0159 For 08-10 FXST/FLST $517.951701-0162 For 00-05 FXST/00-07 FLST (except 07 FLSTF) 517.95

PART # DESCRIPTION SUG. RETAIL1701-0163 For 02-07 FLHR, FLHRC, FLHX, FLTR, FLHT, FLHTC $517.95

PART # DESCRIPTION SUG. RETAIL1721-0759 4-pad set $133.95

PART # DESCRIPTION SUG. RETAILDS-324033 2-pad set $49.95

PART # DESCRIPTION SUG. RETAIL1701-0158 For 08-10 FXST/FLST $594.951701-0150 For 06-07 FXST/07 FLSTF 594.95DS-324027 For 00-05 FXST/ 00-07 FLST (except 07 FLSTF) 594.95DS-324030 For 87-99 FXST/FLST 594.951203-0001 For 02-07 FLT/FLHT/FLHR 594.95

PART # DESCRIPTION SUG. RETAIL1203-0003 For 02-05 VRSCA/B (V-Rod) $594.951701-0151 For 06-10 FXD/FXDWG 594.95DS-324028 For 00-05 FXD/FXDWG 594.951701-0153 For 04-10 XL 594.95

PART # DESCRIPTION SUG. RETAIL00-10 FXST, FLST (EXCEPT SPRINGERS)/00-07 FLHT, FLHR, FLHX, FLTR/00-05 FXD, FXDWG W/ CAST OR BILLET WHEELS/00-03 XL W/ CAST OR BILLET WHEELS (2-PAD DESIGN)DS-324022 Left side $463.95DS-324023 Right side 463.9584-99 SOFTAIL (EXCEPT SPRINGERS), 84-99 FLT/FLHT, 93-99 FXDWG (2-PAD DESIGN)DS-324024 Left side 479.95DS-324025 Right side 479.95

PART # DESCRIPTION SUG. RETAIL08-10 FLHR, FLHRC, FLHX, FLTR, FLHT, FLHTC (4-PAD DESIGN)1701-0154 Left side $570.951701-0156 Right side 570.9506-10 V-ROD (4-PAD DESIGN)1701-0154 Left side 570.951701-0156 Right side 570.9504-10 XL (W/ CAST OR BILLET WHEELS) (2-PAD DESIGN)1701-0152 Left side 463.95DS-324023 Right side 463.95

FOUR-PISTON DIFFERENTIAL-BORE CALIPER KITS•Feature Brembo calipers that are made in Italy•Cast aluminum calipers with billet aluminum pistons provide equal expansion rate and longer life•Piston bores have a dual O-ring design to keep out dirt and debris•Caliper kits include caliper with pads, mounting bracket and hardware; work with OEM rotors•Replacement brake pads available separately•Available in a chrome or black finish

NOTE: Dual-disc applications require the purchase of left and right sides.

DS-324022

DS-324024

DS-324027

1701-0157

1701-0161


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

ROADLOK™ MID SNIPER™ FRONT CALIPERS•Tired of always having to chain or padlock your bike?•HHI has eased your pain by incorporating the RoadLok MID (Motorcycle Immobilization Device) into their 500 Series 4-piston brake calipers

•A BrakeBolt™ hardened stainless steel locking pin, ABLOY® Exec® lock mechanism, two patent-protected keys, X-Rod™ anti-drill technology, key chain quick-connect and the ReKey™ key replacement program are featured with the RoadLok MID

•Just bolt to the front of your bike and know your bike will be safe while you aren’t watching it•Made from 6061 billet aluminum with a chrome finish•Banjo bolt crush washers and all mounting hardware are included•Available for single or dual-disc applications•Made in the U.S.A.

822


RETAIL6-PISTON SINGLE-DISC FRONT CALIPERSDS-325892 For all 00-07 models (except Springers 04-07 XL,

FXD/XL w/ spoke wheel, 06-07 Dyna Glide) $439.95DS-325890 For 84-99 FXST, FLST, FXDWG and FXD/XL

w/ mag wheel (except Springers and narrow glide spoked wheels) 439.95

DS-325891 For 84-99 FXD, XL w/ spoke wheel 439.951701-0287 For 08-10 FLHT, FLHR, FLHX, FLTR

(with or without ABS) 438.956-PISTON DUAL-DISC FRONT CALIPERS (PR.)DS-325897 For 00-07 FLHT, FLHR, FLTR and FXD, 00-03 XL

w/ mag wheel 878.951701-0288 For 08-10 FLHT, FLHR, FLHX, FLTR

(with or without ABS) 877.954-PISTON SINGLE-DISC FRONT CALIPERS1701-0002 For 00-07 FXST, FLST, FXDWG, FXD, 00-03 XL 378.951701-0165 For 00-07 FXST, FLST, FXDWG, FXD (black anodized) 378.951701-0001 For 84-99 FXST, FLST, FXDWG and FXD, XL

w/ front mag wheel (except Springers) 378.951701-0164 For 84-99 FXST, FLST, FXDWG and FXD,

XL w/ front mag wheel (except Springers and narrow glide spoked wheels) (black anodized) 378.95


RETAIL4-PISTON SINGLE-DISC FRONT CALIPERS (CONT)DS-3259251 For 88-06 FXSTS $551.951701-0111 For 97-07 FLSTS, 08-10 FLSTSB 378.954-PISTON DUAL-DISC FRONT CALIPERS (PR.)1701-0005 For 00-07 FLHT, FLHR, FLTR 755.951701-0167 For 00-07 FLHT, FLHR, FLTR (black anodized) 755.951701-0004 For 84-99 FLHT, FLT, FLHS, FLHR, FLTR 755.951701-0166 For 84-99 FLHT, FLT, FLHS, FLHR, FLTR

(black anodized) 755.954-PISTON REAR CALIPERS1701-0289 For 08-09 FXST/FLST 531.951701-0007 For L87-99 FXST/FLST 531.951701-0009 For L87-94, 99 FXR 551.951701-0170 For 06-07 Dyna 551.951701-0017 For 00-05 Dyna 551.951701-0016 For 91-99 Dyna 551.951701-0011 For 00-01 FLT 551.951701-0010 For 86-99 FLT 551.951701-0290 For 08-10 FLHT, FLHR, FLHX, FLTR 551.951701-0112 For 00-07 FXST, FLST 531.951701-0113 For 02-07 FLHT/FLTR/FLHR 551.95

4- AND 6-PISTON BRAKE CALIPERS•Precision CNC-machined billet aluminum construction•Chrome finish, unless noted•Feature stainless steel pistons and chrome hardware•Quick-change design for easy pad maintenance•Dual, hidden bleeders for easy bleeding•Differential bore technology unless noted•Billet aluminum brackets are included where required•Made in the U.S.A.

1 Standard bore.

1701-0164

1701-0017

PART # DESCRIPTION SUG. RETAILSINGLE DISC1701-0116 All 00-07 models (except Springer, 04-07 XL

and 06-07 Dyna/V-Rod models) $498.951701-0117 All 84-99 models (except Springer models) 498.95

PART # DESCRIPTION SUG. RETAILDUAL DISC1701-0118 All 00-07 models (except Springer, 04-07 XL

and 06-07 Dyna/V-Rod models) $876.951701-0119 All 84-99 models (except Springer models) 876.95

4-PISTON

1701-01171701-0116

1701-0112

1701-0001

1701-00011701-0001

1701-01671701-0007

1701-00071701-0009

DS-325892DS-325892


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

823


RETAILSINGLE DISC1701-0120 For all 00-07 models (except Springers, 04-07 XL, 06-07 Dyna/V-Rod models) $478.951701-0168 For all 84-89 models (except Springer models) 478.95DUAL DISC1701-0169 For all 00-07 models (except Springers, 04-07 XL, 06-07 Dyna/V-Rod models) 955.95

6-PISTON BRAKE CALIPERS FOR 13” ROTORS•Precision CNC-machined chromed billet aluminum construction•Features differential bore technology, stainless steel pistons and chrome hardware•Quick-change design for easy pad maintenance•Dual, hidden bleeders for easy bleeding•For use with custom 13” rotors only•Made in the U.S.A.


RETAIL4-PISTON REAR CALIPERS (CONT)1701-0171 For 05-07 XL $551.951701-0013 For 00-03 XL 551.951701-0012 For 84-99 XL 551.95DS-3259451 Custom rigid application w/ 10” rotor, 3/4” axle 531.951701-0023 Custom applications w/ 10” rotor, 1” axle 531.95DS-3259441 Custom rigid applications w/ 11.5” rotor, 3/4” axle 531.951701-0022 Custom rigid applications w/ 11.5” rotor, 1” axle 531.951701-0020 Custom FXST/FLST frames, 1” axle 531.951701-0021 Right-side drive FXST/FLST frames, 1” axle 531.95CALIPER REPLACEMENT COMPONENTS1702-0013 Rebuild kit for 4-piston standard-bore calipers

(fit only 4-piston PART #s in DS- series) 35.951702-0001 Rebuild kit for 4-piston differential-bore calipers

(fit only 4-piston PART #s in 1701- series) 39.95DS-325898 6-piston rebuild kit 49.95RDP-324 6-piston brake pads 46.951 Standard bore.

4- AND 6-PISTON BRAKE CALIPERS (CONT)


RETAILCUSTOM 530 CHAIN DRIVE APPLICATIONS1210-0111 Left side rear kit, chrome $744.951210-0112 Right side rear kit, chrome 744.951210-0328 Left side rear kit, black 744.951210-0329 Right side rear kit, black 744.951720-0036 Brake pad set 45.951702-0052 Rebuild kit 35.95

SPROCKET-4-PISTON REAR BRAKE CALIPER KITS•4-piston caliper with integral mount for 3/4” or 1” axle and weld-on mounting tab

•Stainless steel heat treated, ground and polished 51-tooth sprocket with mounting hardware

•Matching front rotors are available separately; see page 811


PART # DESCRIPTION SUG. RETAILDRIVE-SIDE BRAKE CALIPER KITS1701-0068 Left side kit $698.951701-0069 Right side kit 698.95ROTOR HATS1710-0163 1/8” offset 347.95

PART # DESCRIPTION SUG. RETAILROTOR HATS (CONT)1710-0164 3/8” offset $347.951710-0165 1/4” offset 347.951710-0166 1/2” offset 347.95

DRIVESIDE REAR BRAKE CALIPER KITS•Features 4-piston standard-bore stainless steel pistons, CNC-machined to exact tolerances

•Caliper bodies are billet aluminum construction with a chrome finish•Kit includes necessary chrome brackets, weld-on mounting tabs, hardware and instructions•For use with 1” or 3/4” axles•Will work with up to a 11/2” belt•Rotor hat is an 111/2” polished stainless steel rotor with a built-in offset designed to mount between wheel and pulley (sold separately)


NOTE: Requires a minimum 18” x 51/2” wide billet wheel, or 18” x 81/2” spoke wheel.

NOTE: Requires a custom brake line.

NOTE: Wheels designed for use with driveside brake caliper kits do not require the use of a rotor hat.

1210-0329

1710-0163

1701-0013

DS-325945

1701-0012

1701-0021

1701-0120

CUSTOM FXST/FLST AND RIGID FRAME APPLICATIONS

1210-0111

1701-0068

DS-325944


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

824

PART # DESCRIPTION SUG. RETAILFRONT FOR 04-08 XL1701-0124 Left $209.951701-0125 Right 209.95FRONT FOR 00-07 FXST, FLST, 00-05 FXD, FXDWG, 00-07 FLHT, FLTR, FLHR, FLHX AND 00-03 XL1203-4404 Left; repl. OEM #44046-00A 219.957805-3037 Right; repl. OEM #44023-00A 219.95FRONT FOR 84-99 FXST, FXD, XL, FXR7805-3045 Left 219.95

CHROME 00-07 STYLE BRAKE CALIPERS•Direct bolt-on design•Calipers include brake pads and bleeder screws•Sold each

NOTE: Not for Springer (front) or Deuce (rear).

NOTE: Pre-2000 applications use 00-05 Big Twin-style replacement brake pads.

PART # DESCRIPTION SUG. RETAILREAR CALIPER1701-0128 For 06-07 FXD, FXDWG $249.957805-3038 For 00-05 FXD, FXDWG; repl. OEM #44017-00B 239.957805-3039 For 02-07 FLHT, FLHR, FLTR, FLHX;

repl. OEM #44080-02B 239.951701-0126 For 05-06 XL 279.957805-3044 For 00-03 XL; repl. OEM #40925-00A 219.951701-0127 For 06-07 FXST, 07 FLSTF 259.951203-4401 For 00-05 FXST, 00-07 FLST; repl. OEM #44016-00A

(except FXSTD and 07 FLSTF) 239.957805-3040 For L87-99 FXST, FLST 239.95

1701-01241203-4404

7805-30371701-0128

7805-3044

1701-0126

7805-3038

1701-0127

1203-4401

7805-3040

DS-325385

PART # DESCRIPTION SUG. RETAILDS-325493 For L87-99 Softail models; repl. OEM #44207-87 $129.95

CHROME REAR CALIPER BRACKET•Chrome-plated cast aluminum•For use with OEM-style calipers•Matching chrome caliper, PART #DS-290580, available separately

DS-290580

1701-0179FRONT AND REAR BRAKE CALIPER KITS•OEM-style calipers in chrome finish

•Complete with all necessary mounting hardware and brake pads

•Rear calipers accept OEM bolts, shims, bushing and retainer (not included)

NOTE: Check caliper-to-wheel clearance on custom wheels.

PART # DESCRIPTION SUG. RETAILFRONTDS-325385 For all 84-99 single-disc models (except Springers and 4-speed FL models) (each) $199.95DS-325383 For all 84-99 dual-disc models (pair) 379.95DS-325387 Right-side caliper for dual disc caliper kits (one caliper) 199.95REARDS-2905801 For L87-99 Big Twin (except FXSTSB) and L87-99 XL; repl. OEM #s 44050-87 and 44076-86A 189.951701-0179 For 85-86 Big Twin 229.95DS-325493 Bracket for L87-99 Softail models; repl. OEM #44207-87 129.951 Brake pads and bleeder screw must be purchased separately.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

825

PART # DESCRIPTION SUG. RETAILFOR 00-07 BIG TWIN MODELS WITH STOCK CALIPERS2402-0072 12-point caliper bolt covers (4-pk.) $25.95

CALIPER BOLT COVERS•Quality chrome-plated steel bolt covers•Polished and buffed to a mirror-like finish•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1742-0114 Fits 12mm 12-point screws on

00-07 H-D brake calipers/caliper mounts and bleeder screws $16.95

BULLET COVER•Cover up those ugly zinc or cad-plated brake caliper bolts with these chrome-plated beauties

•Can also be used to cover any 7/16” hex bolt or nut•Sold each

PART # DESCRIPTION SUG. RETAILDS-324806 Brake bleeder screw cover (ea.) $11.95DS-324801 Brake bleeder screw cover (pr.) 19.95

BRAKE BLEEDER SCREW COVERS•Chrome-plated covers hide the unsightly bleeder screws•Complement the banjo bolt cover DS-324802•Fit stock bleeder screws found on most 84-10 calipers (except 08-10 FLHT/FLHR/FLTR/FLHX)

•Sold each or in pairs

PART # DESCRIPTION SUG. RETAILDS-324804 Clutch cable ferrule cover and banjo bolt cover

combo kit (except 08-10 Dresser) $26.950660-0001 Clutch cable ferrule cover (ea.) 16.95DS-324802 Banjo bolt cover only (ea.) (except 08-10 Dresser) 16.95

CLUTCH CABLE FERRULE/BANJO BOLT COVER KIT•Kit includes chrome covers for clutch cable ferrule and master cylinder banjo bolt

•Banjo bolt cover also can be used on caliper banjo bolts•Covers can be purchased separately

PART # DESCRIPTION SUG. RETAILFOR 00-10 MODEL OEM CALIPERS (EXCEPT 08-10 DRESSERS, 06-10 V-ROD, 04-10 XL) FRONT AND REARDS-244169 Smooth-radius $25.95DS-244171 Nasty Stepped 25.95

FOUR-PISTON BRAKE CALIPER INSERTS•Chrome-machined billet aluminum•Sold individually•Made in the U.S.A.

Patent #D450,016

PART # DESCRIPTION SUG. RETAILFOR 08-10 DRESSERS AND 06-10 V-RODS1703-0049 Nasty $16.951703-0050 Vertical milled 16.951703-0051 Warrior 16.951703-0052 Reflections 16.951703-0053 Crusader Cross 16.95FOR MOST 84-99 BIG TWIN AND XL MODELS WITH STOCK TWO-PISTON CALIPERSDS-243206 1.4” Road Warrior 25.95

TWO-PISTON BRAKE CALIPER INSERT•Chrome CNC-machined billet aluminum•Sold individually•Made in the U.S.A.

DS-324804

DS-324802

DS-244169

DS-244171

1703-0049 1703-0050 1703-0051

1703-0053 DS-243206

DS-324801

DS-324806

PART # DESCRIPTION SUG. RETAILFRONT CALIPER FOR 00-07 MODELS (EXCEPT SPRINGERS, 06-07 DYNA V-ROD AND 04-07 XL)7805-7004 Left side $559.95

PART # DESCRIPTION SUG. RETAILREAR CALIPER7805-7008 For 00-07 FLST (except 07 FLSTF),

00-05 FXST $559.95

NESS-TECH® CHROME SIX-PISTON BRAKE CALIPER KITS•CNC-machined billet T-6 aluminum with a smooth, flowing radius design

•Nissin internal components for proven reliability and stopping power

•Direct bolt-on design•Includes brake pads•Made in the U.S.A.

7805-7004

7805-7008

1703-0052


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

826

PART # DESCRIPTION SUG. RETAILDS-325193 For all 00-10 models front and rear (except

08-10 Dressers, 06-10 V-Rod, 04-10 XL) $6.95

CALIPER INSERT•Chrome caliper insert with continuous spherical radius

•Special foam adhesive means easy installation•Sold individually

PART # DESCRIPTION SUG. RETAILDS-325345 1.4” caliper insert for all front

and most pre-87 rear calipers (ea.) $6.95

SPHERICAL RADIUS CALIPER INSERT•Chrome caliper inserts with spherical radius give a look different from any other on the market

•Special foam adhesive holds inserts in place; sold individually

PART # DESCRIPTION SUG. RETAIL1703-0024 For 00-05 Dressers and Road Kings

w/o rotor covers (pr.) $104.951703-0025 Left side, for all 00-07 Softail (except FXSTS,

FLSTS and FLSTC), 00-07 Dyna models, 00-03 XL models (except 883C/1200C) and 02-05 V-Rod (ea.) (will not fit Dyna or XL models with laced wheel) 73.95

1703-0026 Right side, for all 00-07 Softail (except FXSTS, FLSTS and FLSTC), 00-07 Dyna models, 00-03 XL models and 02-05 V-Rod (ea.) (will not fit Dyna or XL models with laced wheel) 73.95

CALIPER SKINS•Covers the front brake caliper in luxurious, contoured chrome

•Gives the look of high-tech, 6-piston brakes without the expense

•Eases cleaning•Two-piece clamshell design is easy to install

PART # DESCRIPTION SUG. RETAIL1703-0046 Front caliper cover for all 84-99 Big Twin,

00-07 FLSTS/FLSTSC/FXSTS (ea.) $21.951703-0047 Rear caliper cover for all 87-99 models

(except Dresser/Road King) 23.95

FULL COVERAGE CALIPER COVERS•Unique accents cover the entire profile of the brake caliper

•Use a super-clean invisible mounting system•Banjo bolt and covers sold separately

PART # DESCRIPTION SUG. RETAILDS-530480 Front/rear 4-piston caliper seal/piston kit for

00-02 Big Twin and XL; repl. OEM #44313-00 $44.95DS-530471 Front caliper seal kit for 84-99 Big Twin models

and XL; repl. OEM #s 44047-83 and 44022-83 4.95DS-530473 Rear caliper seal kit for 87-99 Big Twin models

and XL; repl. OEM #44045-87 4.95DS-530472 Rear caliper seal kit for 85-86 Big Twin models

and XL 4.95DS-530475 Seal kit for 84-87 FLT and FLHT w/ dual piston

rear caliper; repl. for OEM #s 43945-79, 43947-79 (ea.); two required per caliper 5.95

CALIPER SEAL KITS•Neoprene seals are required when rebuilding calipers on Harley models

•Front and rear kits include seal and dust boot

PART # DESCRIPTION SUG. RETAIL40525 1/4”-28 $14.9540526 3/8”-24 14.95

SPEED BLEEDERS•The fastest way to bleed your brakes•Easy, one-man operation•40525 fits JayBrake 2- and 6-piston, Performance Machine 4- and 6-piston and CCI Rev Tech 2-piston calipers; replaces OEM #44179-58

•40526 fits front and rear on 91-10 Dyna Glide, 84-07 FLT/FLHT models, 85-10 FX models, 86-03 XL models, JayBrake 4-piston, Performance Machine 4-piston, Arlen Ness 4-piston, Chrome Specialties 4-piston and all GMA calipers; replaces OEM #44146-77, 44146-82 and 44048-83

•Sold in pairs•Made in the U.S.A.

SPEED BLEEDERS•Goodridge’s patented stainless steel bleeder screw features a built-in check valve

•Means you can do brake bleeding easily and by yourself

•Fit front and rear applications unless noted•Sold in pairs

PART # DESCRIPTION SUG. RETAIL1731-0073 Brake bleeder caps (2-pack) $5.95

BRAKE BLEEDER CAPS•Replace missing or cracked bleeder caps•Keep mud and dust out of your brake lines•High-temp resistant materials and universal fitment make these caps a convenient replacement

•Sold in a 2-pack•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILLMBRL12001 For L88-06 FXSTS; repl. OEM #41040-88B $92.95

CUSTOM BRAKE REACTION LINK•Polished stainless steel reaction link•Available in a smooth finish•Made in the U.S.A. by Landmark Mfg.

1703-0024

1703-0046 1703-0047

DS-530480

DS-530471

PART # DESCRIPTION SUG. RETAILSB3824 For 84-07 FLT, FLHT

For 85-10 FXFor 86-03 XL $16.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

827

44063-83/83A/83B/83C/83D

44209-82/82A43957-86/86A/86B/86D

44209-87B/87C/44213-87 44005-74/44005-78/44135-74

44032-77/44032-79

43395-80

42831-04

42836-04

44082-00/00A/00C/44442-00A

Jaybrake 4-piston CalipersGMA “A” Calipers

PM 112X6 Calipers PM 125X4S/125X4SL/125X2, GMA “F” Jaybrake 2-piston Calipers “small”

Brembo 4-piston Calipers Jaybrake 6-piston Calipers

PM125X4R/137X4R Calipers

PM125X4HR Calipers PM162X2 Calipers

GMA “B” Calipers, Jaybrake 2-piston Calipers “Large”

44082-0844082-00C/OOD

42850-06B 44298-08

OEM-STYLE AND AFTERMARKET BRAKE PADS•Use these illustrations as a guide to help determine the style of brake pads for your model

OEM-STYLE BRAKE PADS

AFTERMARKET BRAKE PADS


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

828

DESCRIPTION OEM #SINTERED METAL ORGANIC SEMI-METALLIC

CERAMIC-ORGANIC

For 08-10 FLHT/FLHR/FLHX/FLTR 41854-08 1721-0757 1720-0136 1721-0883 -For all 08-10 Big Twin (except 08-10 Dresser/FLSTB/FXSTSSE) 44082-08 1721-0813 1720-0138 1721-0931 -For all 00-07 Big Twin (except FXSTS/I and FLSTSC/I) 44082-00C/D 1721-0545 1721-0631 1721-0882 -For 05-07 FLSTSC/I, 97-03 FLSTS, 88-06 FXSTS/I, 08-10 FLSTSB 44063-83A/C DS-325874 DS-325116 DS-325007 DS-325394For 84-99 FLT/FLHT/FLHS/FLHR/FLTR 44063-83A/C DS-325874 DS-325116 DS-325007 DS-325394For 91-99 Dyna Glide 44063-83C DS-325874 DS-325116 DS-325007 DS-325394For 84-94 FXR/FXRS/FXRT 44063-83A/83C DS-325874 DS-325116 DS-325007 DS-325394For 84-99 FXST/FLST/FXWG 44063-83A/83C DS-325874 DS-325116 DS-325007 DS-325394For 84-85 FXE/FXEF 44063-83C DS-325874 DS-325116 DS-325007 DS-325394For 04-10 XL 42831-04/04A 1721-0094 1721-0178 1721-0884 -For 00-03 XL 44082-00 DS-325885 DS-325117 - -For 86-99 XL 44063-83A/C DS-325874 DS-325116 DS-325007 DS-325394For 06-10 V-Rod 42897-06A/08 1721-0757 1720-0136 1721-0883 -For 02-05 V-Rod 44082-00C/D 1721-0545 - 1721-0882 -

DESCRIPTION OEM #SINTERED METAL ORGANIC SEMI-METALLIC

CERAMIC-ORGANIC

For 08-10 FLHT/FLHR/FLHX/FLTR 42850-06B 1721-0757 1720-0136 1721-0883 -For all 08-10 Big Twin (except 08-10 Dresser) 42298-08 1721-0814 1720-0139 1721-0932 -For all 00-07 Big Twin models (except 06-07 FXST, 07 FLSTF) 44082-00/C 1721-0545 1721-0631 1721-0882 -For 86-99 FLT/FLHT/FLHS/FLHR/FLTR 42957-86A, 43957-86B/E DS-325876 DS-325118 DS-325008 DS-325404For 84-85 FLT/FLHT 43957-80 - DS-325110 DS-325000 -For 91-99 Dyna Glide 44213-87, 44209-87C DS-325877 DS-325122 DS-325009 DS-325406For L87-94 FXR/FXRS/FXRT 44213-87C, 44209-87 - DS-325122 DS-325009 DS-325406For 86-E87 FXR/FXRS/FXRT 44209-82 DS-325875 DS-325115 DS-325006 DS-325393For 06-07 FXSTB/C, 07 FLSTF 46721-06 1721-1198 1720-0137 - -For L87-99 FXST/FLST 44213-87, 44209-87 DS-325877 DS-325122 DS-325009 DS-325406For 84-E87 FXST/FLST 44209-82 DS-325875 DS-325115 DS-325006 DS-325393For 85-86 FXWG 44209-82 DS-325875 DS-325115 DS-325006 DS-325393For 85 FXE/FXEF 44209-82 DS-325875 DS-325115 DS-325006 DS-325393For 04-10 XL 42836-04/42029-07 1721-0095 1721-0179 1721-0885 -For 00-03 XL 44082-00 DS-325885 DS-325117 1721-0882 -For L87-99 XL 44213-87, 44209-87 DS-325877 DS-325122 DS-325009 DS-325406For 86-E87 XL 44209-82 DS-325875 DS-325115 DS-325006 DS-325393For 06-10 V-Rod 42850-06B 1721-0757 1720-0136 1721-0883 -For 02-05 V-Rod 44082-00C 1721-0545 - 1721-0882 -

DESCRIPTION PART #GMA CUSTOM CALIPERS“F” caliper DS-325872

DESCRIPTION PART #GMA CUSTOM CALIPERS (CONT)“A” caliper DS-325871

DESCRIPTION PART #GMA CUSTOM CALIPERS (CONT)“B” caliper DS-325884

DESCRIPTION PART #JAYBRAKE2-piston (large) DS-3258842-piston (small) DS-3258724-piston DS-3258706-piston DS-325873

DESCRIPTION PART #PERFORMANCE MACHINE162 x 2 (0056-1600) DS-325883125 x 4R (0052-1602) DS-325881137 x 4B (0052-1602) DS-325881125 x 4RSPH (0052-1602) DS-325881137 x 4 (0053-2901/2902) DS-325882

DESCRIPTION PART #PERFORMANCE MACHINE (CONT)125 x 2 (0052-1601) DS-325872125 x 4S (0052-1601) DS-325872125 x 4SL (0052-1601) DS-325872137 x 4R (0053-2901/2902) DS-325882125 x 4HR (0053-2901-2902) DS-325882

PART # SUG. RETAIL1720-0136 $41.951720-0137 41.951720-0138 41.951720-0139 41.951721-0094 44.951721-0095 44.951721-0178 40.951721-0179 40.951721-0545 51.951721-0631 41.951721-0757 44.951721-0813 44.95

PART # SUG. RETAIL1721-0814 $44.951721-0882 24.951721-0883 24.951721-0884 26.951721-0885 24.951721-0931 24.951721-0932 24.951721-1198 51.95DS-325000 24.95DS-325006 24.95DS-325007 24.95DS-325008 24.95

PART # SUG. RETAILDS-325009 $24.95DS-325110 34.95DS-325115 26.95DS-325116 26.95DS-325118 38.95DS-325122 38.95DS-325393 26.95DS-325394 29.95DS-325404 36.95DS-325406 36.95DS-325870 48.95DS-325871 44.95

PART # SUG. RETAILDS-325872 $44.95DS-325873 44.95DS-325874 48.95DS-325875 48.95DS-325876 58.95DS-325877 58.95DS-325881 48.95DS-325882 48.95DS-325883 49.95DS-325884 48.95

BRAKE PADS•Drag Specialties brake pads provide safe, consistent braking come rain or shine

•Sintered metal pads are quiet and dust-free ideal replacement where braking performance and durability are the prime requirements

•Organic pads are for high-performance applications•Semi-metallic pads are OEM replacement•Ceramic-organic pads offer more protection for polished and chromed rotors

•All pads are not susceptible to resonance, which reduces squeaking brakes and gives superb braking control without lockup

•Extensively tested to meet or exceed OEM specifications and conform to FMVSS No. 108 and AAMVA No. 830869

PRICE LIST

NOTE: DS-325882 and DS-325881 are the same fitment; DS-325882 is 9.5mm thick; DS-325881 is 8mm thick.

SINTERED METAL PADS FOR AFTERMARKET CALIPERS

REAR BRAKE PADS (SOLD IN PAIRS)

FRONT BRAKE PADS (SOLD IN PAIRS)

Sintered Metal

Organic

Semi-Metallic Ceramic-Organic


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

829

DESCRIPTION OEM #STREETEXCEL PART #

CARBON TECH PART #

STREET CERAMIC PART #

06-10 V-Rod models 42897-06A/08 1721-0558 - -02-05 V-Rod models 44082-00A - 1721-0586 1722-013008-10 FXSTB, FXSTC, FLSTC, FLSTF, FLSTN, FXCW/C 44082-08 1721-0832 - -08-10 FLHT/FLHR/FLHX/FLTR 42849-08 1721-0558 - -05-07 Big Twin models (except FLSTS and FLSTSC) 44082-00C 1721-0534 - -00-04 Big Twin models (except FLSTS and FXSTS) 44082-00/00B 1721-0534 - -05-07 FLSTSC, 08-10 FLSTSB 44063-83C 1721-0223 1721-0222 1722-000897-03 FLSTS 44063-83C 1721-0223 1721-0222 1722-000889-07 FXSTS 44063-83C 1721-0223 1721-0222 1722-000884-99 FLT, FLHT and FLHS 44063-83B/83C 1721-0223 1721-0222 1722-000808-10 FXD, FXDF, FXDWG, FXDC, FXDB, FXDL 44082-08 1721-0832 - -91-99 FXDB, FXDC, FXDL and FXDWG 44063-83E 1721-0223 1721-0222 1722-000884-94 FXR, FXRS and FXRT 44063-83A/83C 1721-0223 1721-0222 1722-000884-99 FXST, FXWG and FLST 44063-83A/83C 1721-0223 1721-0222 1722-000885 FXE and FXEF 44063-83A 1721-0223 1721-0222 1722-000804-10 XL 42831-04 1721-0213 - -00-03 XL 44082-00/00B - - 1722-013086-99 XL 44063-83A/83C 1721-0223 1721-0222 1722-0008BUELL94-97 models (all) 42386-94YA - 1721-0224 1721-027898-02 models (all except Blast) H0300.FA 1722-0040 - -03-10 XB9R/S Firebolt/Lightning - 1721-0425 - 1721-04341

XB9SX City X 05-06 - 1721-0425 - 1721-04341

XB12R/S/X Firebolt/Lightning/Ulysses 04-10 - 1721-0425 - 1721-04341

00-08 Blast H0300.T 1722-0031 - 1721-02501 Racing Sintered Metal (RS) brake pads.


CARBON TECH PART #


All 06-10 V-Rod 42850-06/06B 1721-0559 - -All 02-05 V-Rod 44082-00C - 1721-0586 1722-0131All 00-07 Big Twin 44082-00/00B 1721-08221 - -08-10 FXSTB, FXSTC, FLSTC, FLSTF, FLSTN, FXCW/C 42298-08 1721-0833 - -08-10 FXD, FXDF, FXDWG, FXDC, FXDB, FXDL 42298-08 1721-0833 - -08-10 FLHT/FLHR/FLHX/FLTR 41852-08A 1721-0559 - -86-99 FLT, FLHT and FLHS 43957-86B/86D 1721-0227 1721-0226 1722-000984-85 FLT, FLHT 43957-80 - - 1722-000791-99 FXDB, FXDC, FXDL and FXDWG 44209-87B/87C 1721-0228 1721-0233 1722-0010L87-94 FXR, FXRS and FXRT 44213-87, 44209-87 1721-0228 1721-0233 1722-001084-E87 FXR, FXRS and FXRT 44209-82/82A - 1721-0219 1722-0006

DRAG SPECIALTIES BRAKE PADSBY SBSSTREETEXCEL SINTERED METAL•Give your bike maximum stopping power with the highest coefficient of friction available in a street pad compound

•HH-rated sintered compound formulation offers high fade resistance and quick cooldown under severe braking loads

•The best in sintered replacement pads for your high-performance street applications

•When you need to replace your worn sintered metal pads, choose STREETexcel pads

NOTE: Never use sintered metal pads in calipers originally equipped with non-sintered pads.

STREET CERAMIC ORGANIC BRAKE PADS•Designed for general-purpose street use•Ceramic pads give long life; excellent for general-purpose street and touring use•Excellent performance in wet and dry conditions•Easy on OEM rotors•Formulated by SBS using the patented Ultra-Sonic UCT (Unified Composite Technology) blending process

CARBON TECH HIGH-PERFORMANCE BRAKE PADS•Developed from experience gained in high-performance racing•Provide unmatched feel and control at the lever•Excellent for use with stainless steel or cast iron rotors•When you want the ultimate in stopping power, choose CarbonTech – racing performance tuned for the street•Direct replacements for PM brake pads

NOTE: Late-model pads come with abutment shims.

NOTE: Ceramic pads can be used for calipers originally equipped with sintered metal pads.



DRAG SPECIALTIES BRAKE PADS continued on next page.1 Also available in HS compound, PART #1721-0821, SUG. RETAIL $36.95.

Sintered1721-0822

Carbon1721-0229

Ceramic1722-0009


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

830

FITS MODEL FITS CALIPER #CARBON TECH (HCT) PAD PART #

BREMBO CALIPERSGP X10.48 13/14, racing caliper - 1721-04101

GMA FRONT CALIPERS84-99 FXR, FXD, FLT and XL dual-disc models w/ integral mount bracket (“A” caliper) 1701-0203, 1701-0204, 1701-0205, 1701-0206, 1701-0207 1721-021684-99 FXR, FXST, FLST, FXD, FXDW and XL (“B” caliper) 1701-0228, 1701-0229, 1701-0230, 1701-0231, 1701-0232 1721-022188-99 FXSTS (“B” caliper) 1702-0243, 1701-0244, 1701-0245, 1701-0246, 1701-0247 1721-0221GMA REAR CALIPERSL87-99 FXST, FLST and FXSTS (except FXSTSB) (“B” caliper) 1701-0253, 1701-0254, 1701-0255, 1701-0256, 1701-0257 1721-022184-86 FXST, FLST and FXWG (“B” caliper) 1701-0248, 1701-0249 1701-0250, 1701-0251, 1701-0252 1721-022184-99 FXR (“A” caliper) 1701-0198, 1701-0199, 1701-0200, 1701-0201, 1701-0202 1721-0216L87-98 XL (“B” caliper) 1701-0268, 1701-0269, 1701-0270, 1701-0271, 1701-0272 1721-022186-E87 XL (“B” caliper) 1701-0263, 1701-0264, 1701-0265, 1701-0266, 1701-0267 1721-0221Rigid frames w/ 10” rotor 1701-0213, 1701-0214, 1701-0215, 1701-0216, 1701-0217 1721-0216HAWG HALTER CALIPERS4-piston - 1721-0229JAYBRAKE CALIPERS4-piston caliper A4 P/L - 1721-04031

6-piston caliper A6 R/L - 1721-02306-piston racing caliper - 1721-0230NISSIN CALIPERS6-piston race caliper (single pin) - 1721-04092

PERFORMANCE MACHINE CALIPERS2-piston 162 x 2 (#0056-1600) - 1721-02152-piston 125 x 2, PM 125 x 4S, PM 125 x 4SL (#0052-1601) - 1721-02204-piston 125 x 4R, PM 125 x 4RSPH, PM 137 x 4B (#0052-1602) - 1721-02294-piston 124x4HR (0052-2400), 4-piston 137x4 (0053-2901/2902) - 1721-02254-piston 125 x 4HR (#0053-2901/2902) - 1721-02294-piston 137 x 4R (#0053-2901/2902) - 1721-02296-piston 125 x 6 (#0051-2901/2902) (dual pin) - 1721-02246-piston 137 x 6 (#0052-2601) (dual pin) - 1721-02246-piston 112 x 6B, 112 x 6QC (0052-1602) (single pin) - 1721-04092

1 Dual Carbon (DC) brake pads. For track use ONLY!2 Racing Sintered Metal (RS) brake pad; for Street Ceramic order PART #1721-0350.

PART #SUG.

RETAIL1721-0213 $35.951721-0214 37.951721-0215 31.951721-0216 31.951721-0219 32.951721-0220 30.951721-0221 31.951721-0222 31.95

PART #SUG.

RETAIL1721-0223 $35.951721-0224 32.951721-0225 32.951721-0226 43.951721-0227 48.951721-0228 46.951721-0229 32.951721-0230 37.95

PART #SUG.

RETAIL1721-0233 $41.951721-0250 30.951721-0278 28.951721-0298 29.951721-0350 32.951721-0377 31.951721-0403 53.951721-0409 45.95

PART #SUG.

RETAIL1721-0410 $59.951721-0425 50.951721-0434 60.951721-0504 31.951721-0534 37.951721-0558 37.951721-0559 40.951721-0586 31.95

PART #SUG.

RETAIL1721-0821 $37.951721-0822 40.951721-0832 37.951721-0833 40.951722-0006 30.951722-0007 33.951722-0008 28.951722-0009 38.95

PART #SUG.

RETAIL1722-0010 $37.951722-0031 35.951722-0040 40.951722-0130 28.951722-0131 29.95

PART # DESCRIPTION SUG. RETAIL1702-0033 Brake pad shims $7.95

BRAKE PAD SHIMS•Brake pad shims give better brake feel; help protect brake pistons and reduce vibration and noise

•Rubber-fiberglass shims are self-adhesive and fit any brake pad•Four shims per package; sold each

REPLACEMENT PADS FOR AFTERMARKET CALIPERS

PRICE LIST

REAR BRAKE PADS (SOLD IN PAIRS) (CONT)

DRAG SPECIALTIES BRAKE PADS (CONT)


CARBON TECH PART #


L87-99 FXST and FLST 44213-87, 44209-87C 1721-0228 1721-0233 1722-001084-E87 FXST and FLST 44209-82 - 1721-0219 1722-000685-86 FXWG 44209-82 - 1721-0219 1722-000685 FXE and FXEF 44209-82 - 1721-0219 1722-000604-10 XL 42836-04, 42029-07 1721-0214 - -00-03 XL 44082-00/00B/00C 1721-08221 - -L87-99 XL 44213-87, 44209-87C 1721-0228 1721-0233 1722-001086-E87 XL 44209-82 - 1721-0219 1722-0006BUELL94-97 models (all) 42385-94Y - - 1721-037798-02 models (all except Blast) H0301.F - - 1721-029803-10 XB9R Firebolt/XB9S Lightning H0301.T - - 1721-029804-10 XB12R Firebolt/XB12R Lightning/XB9X City X H0301.T - - 1721-029800-08 Blast H0301.T - - 1721-02981 Also available in HS compound, PART #1721-0821, SUG. RETAIL $36.95.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

831

FITMENT OEM # SDP SPORT HH+ PART # DP SINTERED PART # RDP RACE PART #08-10 FLHT/FLHR/FLTR/FLHX 41854-08 - 1721-0680 -08-10 FLSTC/F/N 44082-08 - 1721-0811 -08-10 FXCW/C 44082-08 - 1721-0811 -08-10 FXD/B/C/F/L, 08 FXDWG 44082-08 - 1721-0811 -08-10 FXSTB/C 44082-08 - 1721-0811 -All 05-07 Big Twin models (except FLSTS/FXSTS) 44082-00C - 1721-0544 -All 00-04 Big Twin models (except FLSTS/FXSTS) 44082-00A SDP-918HH DP-918 -97-03 FLSTS 44063-83C SDP-900HH DP-900 RDP90005-07 FLSTSC/I, 08-10 FLSTSB 44063-83C SDP-900HH DP-900 -88-06 FXSTS 44063-83C SDP-900HH DP-900 RDP90084-99 FLT, FLHT and FLHS 44063-83B/ 83C SDP-900HH DP-900 RDP90091-99 FXDB, FXDC, FXDL and FXDWG 44063-83C SDP-900HH DP-900 RDP90084-94 FXR, FXRS and FXRT 44063-83A/ 83C SDP-900HH DP-900 RDP90084-99 FXST, FXWG and FLST 44063-83A/ 83C SDP-900HH DP-900 RDP90084-85 FXE and FXEF 44063-83A SDP-900HH DP-900 RDP90004-10 XL 42831-04/04A 1721-0093 1721-0091 -00-03 XL 44082-00A SDP-918HH DP-918 -84-99 XL 44063-83A/83C SDP-900HH DP-900 RDP90006-10 V-Rod 42897-06A/08 - 1721-0680 -05 V-Rod 44082-00C - 1721-0544 -02-04 V-Rod 44082-00A SDP-918HH DP-918 -BUELL98-02 All (except Blast) H0300.FA - - RDP32408-10 1125R, 09-10 1125CR - 1721-0890 - 1721-089103-10 XB9R/S, XB12R/S H0300.02A8 SDP-926HH - -00-09 Blast H0300.T DP-117 - -

DESCRIPTION OEM # SDP SPORT HH+ PART # DP SINTERED PART #08-10 FLHT/FLHR/FLTR/FLHX 41852-08 - 1721-068008-10 FXCW/C 42298-08 - 1721-081208-10 FXD/B/C/F/L 08 FXDWG 42298-08 - 1721-081208-10 FXSTB/C, 08-10 FLSTC/F/N 42298-08 - 1721-081206-07 FXSTB/C, 07 FLSTF 46271-06 - 1721-0657All 05-07 Big Twin models (except 06-07 FXST, 07 FLSTF) 44082-00/00C - 1721-0544All 00-04 Big Twin models 44082-00A SDP-918HH DP-91886-99 FLT, FLHT and FLHS 43957-86B/86D - DP-90491-99 FXDB, FXDC, FXDL and FXDWG 44209-87B/87C - DP-905L87-94 FXR, FXRS and FXRT 44213-87, 44209-87B - DP-90584-E87 FXR, FXRS and FXRT 44209-82 - DP-901L87-99 FXST and FLST 44213-87, 44209-87C - DP-90584-E87 FXST and FLST 44209-82 - DP-90185-86 FXWG 44209-82 - DP-90185 FXE and FXEF 44209-82 - DP-90104-10 XL 42386-04, 42029-07 - 1721-009200-03 XL 44082-00A SDP-918HH DP-918L87-99 XL 44213-87, 44209-87C - DP-90586-E87 XL 44209-82 - DP-90106-10 V-Rod 42850-06/06B - 1721-068005 V-Rod 44082-00C - 1721-054402-04 V-Rod 44082-00A SDP-918HH DP-918BUELL08-10 1125R, 09-10 1125CR - - DP-11598-02 All (except Blast), 02-10 XB9R/XB9S, 04-10 XB12R H0301.F, H0301.T - DP-11500-09 Blast H0301.T - DP-310-C

DP BRAKES SINTERED METAL BRAKE PADS•Give your bike peak braking performance with DP Brakes brake pads

•Pads have a quick break-in period so you get peak braking performance fast

•DP Brakes design and materials ensure consistent, hard stops and fade-free performance

•Pads give long pad life – sintered metal compounds outlast conventional organic or Kevlar® pads

•Made with DP Brakes proven sintered metal pad material

•Gray-colored aluminum oxide-based ceramic material on backplate of pad keeps heat away from caliper piston and fluid in extreme conditions for fade-free performance

•Excellent initial bite and feel in both wet and dry conditions

•GG friction rated

FRONT BRAKE PADS

SDP SPORT HH+ SINTERED METAL BRAKE PADS•Feature the industry-high, HH+ friction rating•Provide superior stopping power with no mileage penalty


•Quick pad break-in time so you get maximum stopping power fast

•Quiet and dust-free

RDP RACING SINTERED METAL BRAKE PADS•Developed with the aid of top works teams to give your bike maximum stopping power


•Designed to give maximum initial power, with fingertip control throughout the stop

•Quiet and dust-free

NOTE: DP Brakes brake pads are not for use with polished rotors.

REAR BRAKE PADS

SDP Sport HH+DP Sintered RDP Racing Sintered

DP Sintered

DP BRAKES SINTERED METAL BRAKE PADS continued on next page.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

832

HIGH-PERFORMANCE BRAKE PADSSM15 COMPOUND•Delivers dependable, rugged performance certain to satisfy the most demanding sport riders, commuters and touring enthusiasts

•Superior performance in wet or dry conditions•SM15 pads are fade-free, noise-free and dust-free•Smoothness, consistency and responsiveness from the lowest to highest possible temperatures

•Designed for stainless steel rotors; also excellent on cast iron rotors

•Gentle on all rotors•Sold in pairs

CM55 COMPOUND•Designed for high-performance sportbikes and competition use

•HH-rated pads are made using grade C685 friction material for instant, powerful braking power

•Strong, fade-resistant brake•Pads are gentle on all rotors•Sold in pairs

1721-0165

CALIPER TYPE BRAKE PAD PART #“A caliper DP-304

CALIPER TYPE BRAKE PAD PART #“B” caliper DP-917

CALIPER TYPE BRAKE PAD PART #“F” caliper DP-607

PART # SUG. RETAIL1721-0091 $44.951721-0092 44.951721-0093 46.951721-0094 44.951721-0095 44.951721-0544 51.951721-0545 51.951721-0657 51.951721-0680 44.95

PART # SUG. RETAIL1721-0757 $44.951721-0811 44.951721-0812 44.951721-0890 109.951721-0891 99.95DP-115 44.95DP-117 44.95DP-216 44.95DP-304 41.95

PART # SUG. RETAILDP-310-C $41.95DP-317 46.95DP-601 39.95DP-607 38.95DP-614 46.95DP-627 41.95DP-630 46.95DP-900 48.95DP-901 48.95

PART # SUG. RETAILDP-904 $58.95DP-905 58.95DP-907 46.95DP-916 51.95DP-917 46.95DP-918 48.95RDP317 48.95RDP324 48.95RDP-627 48.95

PART # SUG. RETAILRDP900 $48.95RDP913 48.95SDP607HH 48.95SDP-900HH 48.95SDP-911HH 48.95SDP-918HH 48.95SDP-926HH 48.95

DP BRAKES SINTERED METAL BRAKE PADS (CONT)

PRICE LIST

FOR GMA/BDL CUSTOM CALIPERS

DESCRIPTION PART #BREMBOFour-piston (single pin) DP-614Four-piston (dual pin) DP-630Small caliper DP-601

DESCRIPTION PART #JAYBRAKETwo-piston SDP607HHFour-piston (early style) SDP607HHFour-piston (late style) DP-216Six-piston RDP-627/DP-627

DESCRIPTION PART #PRO ONEFour-piston RDP-317/DP-317Two-piston DP-601

DESCRIPTION PART #112 x 6 (96 and earlier) RDP324112 x 6SSL RDP324112 x 6RSL RDP324

DESCRIPTION PART #124 x 4S DP-607125 x 4SL DP-607125 x 2 DP-607

DESCRIPTION PART #125 x 4HR RDP913125 x 4R SDP-911HH162 x 2 DP-916

DESCRIPTION PART #137 x 4R SDP-911HH

FOR BREMBO/JAYBRAKE CALIPERS

FOR PERFORMANCE MACHINE CALIPERS

PART # FITS MODEL SUG. RETAILCM55 SINTERED FRONT BRAKE PADS1721-0165 For 02-06 XB9R Firebolt $43.951721-0165 For 02-03 XB9S Lightning 43.951721-0165 For 05-07 Buell XB9SX CityX 43.951721-0165 For 04-07 Buell XB12R 1200 Firebolt 43.951721-0165 For 04-07 Buell XB12S 1200 Lightning 43.951721-0165 For 06-07 Buell XB12X 1200 Ulysses 43.95SM15 SINTERED REAR BRAKE PADS711SM15 For 98-02 M1, S1, S3, S3T 29.95711SM15 For 01-02 X1 Lightning 29.95711SM15 For 98-01 all Buell except Blast 500 29.95711SM15 For 01-07 Buell Blast 29.95711SM15 For 03-06 Buell XB9R/S Firebolt/Lightning 29.95711SM15 For 05-07 Buell XB9SX CityX 29.95711SM15 For 04-07 Buell XB12R 1200 Firebolt 29.95711SM15 For 04-07 Buell XB12S 1200 Lightning 29.95711SM15 For 06-07 Buell XB12X 1200 Ulysses 29.95711SM15 For 06 XBRR 29.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

833

RED PLUS PADS FOR AFTERMARKET CALIPERS

PART # DESCRIPTION SUG. RETAILPERFORMANCE MACHINE1720-0080 4-piston 125 x 4R, 137 x 4R (0052-1602) $59.951720-0082 6-piston 112 x 6 AC (0052-1605) 59.95

FITS MODEL PART # REPL. OEM #

SUG.

RETAILFRONT BRAKE PADS (SOLD IN PAIRS)00-07 all (except FXSTS/FLSTS and 04-07 XL) 1720-0081 44082-00C $59.9508-10 FLHT, FLHR. FLHX, FLTR models 1720-0083 41854-08 59.9506-10 VRSCA/B/D/R 1720-0083 42850-06A/42897-08 59.95REAR BRAKE PADS (SOLD IN PAIRS)00-07 all (except 06-07 FXST, 07 FLSTF, 04-07 XL) 1720-0081 44082-00/A 59.9508-10 FLHT, FLHR, FLHX, FLTR 1720-0083 42850-06B 59.9506-10 VRSCA/B/D/R 1720-0083 42850-06B 59.95

DESCRIPTION PART # REPL. OEM # SUG. RETAILFRONT BRAKE PADS (SOLD IN PAIRS)08-10 all FLST, FXST, FXCW and FXD models (except FLSTSB) 1720-0068 44082-08 $49.9500-07 all (except FXSTS/FLSTS and 04-07 XL) 1720-0022 44082-00C 49.9584-99 FXST, FLST, FXWG 1720-0023 44063-83C 49.9597-06 FLSTS; 89-06 FXSTS, 05-07 FLSTSC, 08-10 FLSTSB 1720-0023 44063-83C 49.9593-99 FXDWG 1720-0023 44063-83C 49.9591-99 FXD, FXDB, FXDC 1720-0023 44063-83C 49.9584-94 FXR, FXRS, FXRT 1720-0023 44063-83C 49.9508-10 FLHT, FLHR, FLHX, FLTR models 1720-0063 41854-08 49.9584-99 FLT, FLHT, FLHS, FLHR, FLTR 1720-0023 44063-83C 49.9585-86 FXE, FXEF 1720-0023 44063-83C 49.9504-10 XL 1720-0031 42831-04/04A 49.9500-03 XL 1720-0022 44082-00C 49.9586-99 XL 1720-0023 44063-83C 49.9506-10 VRSCA/B/D/R 1720-0063 42897-06A/42897-08 49.9598-02 Buell M2 Cyclone, S1 Lightning, S1 White Lightning, S3/S3T Thunderbolt, X1 1720-0027 42386-98Y/H0300.F 49.95REAR BRAKE PADS (SOLD IN PAIRS)08-10 all FLST, FXST, FXCW and FXD models 1720-0070 42298-08 49.9500-07 all (except 06-07 FXST, 07 FLSTF, 04-07 XL) 1720-0022 44082-00/A 49.9506-07 FXST, 07 FLSTF 1720-0064 46721-06 49.9587-99 FXST, FLST 1720-0024 44209-87C 49.9591-99 FXD, FXDB, FXDC, FXDL, FXDWG 1720-0024 44209-87C 49.9587-94 FXR, FXRS, FXRT 1720-0024 44209-87C 49.9508-10 FLHT, FLHR, FLHX, FLTR 1720-0063 42850-06B 49.9586-99 FLT, FLHT, FLHS, FLHR 1720-0025 43957-86E 49.9506-10 VRSCA/B/D/R 1720-0063 42850-06B 49.9504-10 XL 1720-0032 42836-04 49.9500-03 XL 1720-0022 44082-00/A 49.9587-99 XL 1720-0024 44209-87C 49.95

RED PLUS COMPOUND BRAKE PADS•Specifically designed to complement gradient metal composite rotors•Provide the highest coefficient of friction, the longest service life and run cleaner and quieter than any other composite-specific pad available


Z-PLUS BRAKE PADS•A matrix of carbon/Kevlar® and non-ferrous metal similar to L.R.B. Gold Plus Pads in stopping performance, but softened slightly to provide longer service life in the lower temperature ranges found in common street use

•Dust-free, quiet and the best protection for polished rotors

•Ultra-long service life•Made in the U.S.A.

1720-0081 1720-0080 1720-0082

1720-0068

1720-0022

1720-0023

1720-0063 1720-0031 1720-0070

1720-00341720-0026

1720-00351720-0032

1720-0024

Z-PLUS BRAKE PADS continued on next page.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

834

Z+ PADS FOR AFTERMARKET CALIPERS

PART # CALIPER MODEL # SUG. RETAIL1720-0035 Performance Machine 2-piston (1206-0015, 1207-0015, 1207-0016, 1208-0015, 1208-0016) $39.951720-0035 Performance Machine 4-piston (1206-0017, 1207-0017, 1207-0018, 1208-0017, 1208-0018, 1217-0017, 1219-0017, 1219-0317,

1219-0318, 1230-0017) (order 2 sets) 39.951720-0026 Performance Machine 4-piston 125 x 4R, 137 x 4R (0053-2915, 0053-2916, 0053-2919, 0053-2920, 1203-0017, 1203-0018, 1203-9017,

1213-0017, 1213-0018, 1264-0052, 1266-0052, 1267-0052, 1268-0052, 1271-0052, 1272-0052, 1274-0052, 1283-0052, 1274-0072, 1290-0073, 1291-0073) 49.95

1720-0027 Performance Machine 6-piston 112 x 6 (0051-2909, 0051-2910, 0051-2913, 0051-2914, 0051-2915, 0051-2916, 0051-2917, 0051-2918) 49.951720-0027 HHI 6-piston (LHS CC600, RHS AB601) 49.951720-0034 Brembo 4-piston (111-1000, 112-1000, 141-1000, 142-1000, 171-1000, 172-1000) 49.95

PART # DESCRIPTION SUG. RETAILBREMBO1720-0051 4-piston (111-1000, 112-1000, 141-1000,

142-1000, 171-1000, 172-1000) $59.95PERFORMANCE MACHINE1720-0047 2-piston 125 x 2 (0052-1601) 49.951720-0047 2-piston rear 125 x 4S, 124 x 4SL (0052-1601) 49.951720-0047 4-piston 125 x 4S, 124 x 4SL (0052-1601) 49.951720-0048 4-piston 125 x 4R, 137 x 4R (0052-1602) 59.951720-0049 6-piston 112 x 6 AC (0052-1605) 59.95

PART # DESCRIPTION SUG. RETAILJAYBRAKE1720-0047 2-piston (small) $49.95GMA1720-0047 4-piston “F” calipers 49.95IRON PEGASUS1720-0047 Small 49.95REVTECH1720-0048 4-piston 59.95

DESCRIPTION PART # REPL. OEM # SUG. RETAILFRONT BRAKE PADS (SOLD IN PAIRS)08-10 all FLST, FXST, FXCW and FXD models (except FLSTSB) 1720-0069 44082-08 $59.9500-07 all (except FXSTS/FLSTS and 04-07 XL) 1720-0052 44082-00C 59.9584-99 FXST, FLST 1720-0054 44063-83C 59.9597-03 FLSTS; 89-06 FXSTS, 05-07 FLSTSC, 08-10 FLSTSB 1720-0054 44063-83C 59.9594-99 FXWG 1720-0054 44063-83C 59.9590-99 FXD, FXDB, FXDC, FXDWG 1720-0054 44063-83C 59.9584-94 FXR, FXRS, FXRT 1720-0054 44063-83C 59.9508-10 FLHT, FLHR. FLHX, FLTR models 1720-0065 41854-08 59.9584-99 FLT, FLHT, FLHS, FLHR 1720-0054 44063-83C 59.9585-86 FXE, FXEF 1720-0054 44063-83C 59.9504-10 XL 1720-0059 42831-04/A 59.9500-03 XL 1720-0052 44082-00C 59.9586-99 XL 1720-0054 44063-83C 59.9506-10 VRSCA/B/D/R 1720-0065 42850-06A/42897-08 59.9508 Buell 1125R, 06-08 Buell XBRR 1720-0072 - 59.9598-02 Buell M2 Cyclone, S1 Lightning, S1 White Lightning, S3/S3T Thunderbolt, X1 1720-0049 42386-98Y/H0300.F 59.9503-07 Buell XB9/ XB12 models 1720-0057 H0300.02A8 59.95REAR BRAKE PADS (SOLD IN PAIRS)08-10 all FLST, FXST, FXCW and FXD models 1720-0071 42298-08 59.9500-07 all (except 06-07 FXST, 07 FLSTF, 04-07 XL) 1720-0052 44082-00/A 59.9506-07 FXST, 07 FLSTF 1720-0066 46271-06 59.9587-99 FXST, FLST 1720-0056 44209-87C 59.9591-99 FXD, FXDB, FXDC, FXDL, FXDWG 1720-0056 44209-87C 59.9587-94 FXR, FXRS, FXRT 1720-0056 44209-87C 59.9508-10 FLHT, FLHR, FLHX, FLTR 1720-0065 42850-06B 59.9586-99 FLT, FLHT, FLHS, FLHR 1720-0055 43957-86E 59.9504-10 XL 1720-0060 42836-04 59.9500-03 XL 1720-0052 44082-00/A 59.9587-99 XL 1720-0056 44209-87C 59.9506-10 VRSCA/B/D/R 1720-0065 42850-06B 59.9598-02 Buell M2 Cyclone, S1 Lightning, S3 Thunderbolt, S2/S3T Thunderbolt; 99-02 X1; 03-07 XB9R Firebolt; 00-05 Blast 1720-0058 42385-98Y/H0301.F 59.95

GOLD PLUS BRAKE PADS•LRB’s latest advancement in high-performance friction materials•Racing formula offers extreme stopping power in both wet and dry conditions•Dust and rotor wear are eliminated•Proprietary blend of organics and trace iron requires no break-in•Sold in pairs; order two pairs for dual-disc applications•Made in the U.S.A.

GOLD PADS FOR AFTERMARKET CALIPERS

Z-PLUS BRAKE PADS (CONT)

1720-00721720-0065 1720-00571720-0052 1720-0051 1720-0048


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

835

Extreme peformance pads

BRAKE PADSKEVLAR PADS•Made with DuPont® Kevlar®

•Provide excellent stopping power without noise and rotor galling, even on polished rotors

•Fingertip control and strong, predictable brake response

EXTREME PERFORMANCE BRAKE PADS•The newest sintered metal brake pad fusion technology•Has the highest friction rating available in a pad – 0.6 – for strong, fade-free stopping power•Pad blend includes molybdenum metal and tungsten additives to enhance friction performance for the life of the pad•No lead, iron or steel additives; no more rotor outline etching or rotor stiction•Super-fast bed-in, full friction after 10 to 15 race stop uses•Great heat cycle ability; pads cool after the extreme use and perform just as strong the next day

NOTE: Brake pads include abutment shims where required.

FITS MODEL OEM # KEVLAR PADSSUG.

RETAIL DOUBLE-H PADSSUG.

RETAILEXTREME PERFORMANCE PADS

SUG. RETAIL

02-05 V-Rod 44082-00/00C 1720-0018 $32.95 1721-0465 $36.95 1721-0870 $75.9506-10 V-Rod 42897-06/06A - - 1721-0538 36.95 1721-0872 75.9508-10 FXD, FXDF, FXDWG, FXDB, FXDL 44082-08 - - 1721-0805 41.95 1721-0879 75.9508-10 FXSTB, FXSTC, FLSTC, FLSTF, FLSTN, FXCW/C 44082-08 - - 1721-0805 41.95 1721-0879 75.9508-10 FLHT, FLHR, FLTR, FLHX 41854-08 - - - - 1721-0872 75.9500-07 Big Twin models (except FLSTSC/FXSTS) 44082-00/00C 1720-0018 32.95 1721-0465 36.95 1721-0870 75.9588-06 FXSTS 43063-83/83A/83C FA94 32.95 FA94HH 42.95 1721-0881 75.9597-03 FLSTS, 05-07 FLSTSC, 08-10 FLSTSB 43063-83/83A/83C FA94 32.95 FA94HH 42.95 1721-0881 75.95All 84-99 models (except Springers) 43063-83/83A/83C FA94 32.95 FA94HH 42.95 1721-0881 75.9594-99 FLHR, FLHRCI 43063-83/83A/83C FA94 32.95 FA94HH 42.95 - -04-10 XL (all) 42831-04/04A 1721-0007 32.95 1721-0006 36.95 1721-0866 75.9500-03 XL (all) 44082-00 - - 1721-0465 36.95 1721-0870 75.95INDIAN03 Nova/Legend - FA216/3 31.95 1721-0139 36.95 - -BUELL08-10 1125R/09-10 1125CR H0300.1AMA - - 1721-0802 57.96 1721-0878 95.9594-97 M2 Cyclone, S1 Lightning, S2/S3 Thunderbolt 42386-94Y FA210 36.95 - - - -98-00 M2 Cyclone, S1 Lightning/White Lightning, S3/S3T Thunderbolt, X1 Lightning H0300.FA FA249 39.95 FA249HH 42.95 - -03-09 XB9R/S, XB12R/S, 06-10 XB12X/XT Ulysses H0300.02A8 - - FA345HH 56.95 - -00-08 Blast H0300.T 1720-0021 31.95 FA196HH 36.95 - -

FITS MODEL OEM #KEVLAR PADS

SUG. RETAIL

DOUBLE-H PADS

SUG. RETAIL

EXTREME PERFORMANCE PADS

SUG. RETAIL

02-05 V-Rod 44082-00/00C 1720-0018 $32.95 1721-0465 $36.95 1721-0870 $75.9506-10 V-Rod 42850-06/06A - - 1721-0538 36.95 1721-0872 75.9506-07 FXST, FXSTB, FXSTC, FXSTS, 07 FLSTF 46721-06 1722-0159 32.95 1721-0745 36.95 1721-0874 75.9508-10 FXD, FXDF, FXDWG, FXDB, FXDL 42298-08 - - 1721-0806 41.95 1721-0880 75.9508-10 FXSTB, FXSTC, FLSTC, FLSTF, FLSTN, FXCW/C 42298-08 - - 1721-0806 41.95 1721-0880 75.9508-10 FLHT, FLHR, FLHX, FLTR 42897-08 - - - - 1721-0872 75.9500-07 Big Twin (all except 06-07 FXST, 07 FLSTF) 44082-00/00C 1720-0018 32.95 1721-0465 36.95 1721-0870 75.9584-85 FLT, FLHT, FLHTC 43957-80 FA79 38.95 - - - -86-99 FLT, FLHT, FLHTCI 43957-86/86A/86B/86D FA201 36.95 FA201HH 42.95 - -94-99 FLHR, FLHRCI 43957-86/86A/86B/86D FA201 36.95 FA201HH 42.95 - -84-E87 FXD, FXDL, FXDWG, FXR, FXRS, FXRT, FXRD, FXLR 44209-82/82A FA78 31.95 - - - -L87-99 FXD, FXDL, FXDWG, FXR, FXRS, FXRT, FXRD, FXLR 44209-87B/87C, 44213-87 FA200 34.95 FA200HH 42.95 1721-0847 75.9584-E87 FXST, FXSTB, FXSTC, FXSTS, FLST, FLSTC, FLSTF, FLSTS, FLSTN 44209-82/82A FA78 31.95 - - - -L87-99 FXST, FXSTB, FXSTC, FXSTS, FLST, FLSTC, FLSTF, FLSTS, FLSTN 44209-87B/87C, 44213-87 FA200 34.95 FA200HH 42.95 1721-0847 75.9585-86 FX, FXE, FXEF, FXWG 44209-82/82A FA78 31.95 - - - -86-E87 XL, XLH, XLCH, XLS, XLX 44209-82/82A FA78 31.95 - - - -L87-99 XL, XLH, XLCH, XLS, XLX 44209-87B/87C/87 FA200 34.95 FA200HH 42.95 1721-0847 75.9500-03 XL (all) 44082-00 1720-0018 32.95 1721-0465 36.95 1721-0870 75.9504-10 XL (all) 42836-04 1720-0020 32.95 1721-0537 36.95 1721-0867 75.95INDIAN03 Nova/Legend - FA216/3 31.95 1721-0139 36.95 - -BUELL08-10 1125R/09-10 1125CR H0301.1AM - - 1721-0807 35.95 - -94-97 M2 Cyclone, S1 Lightning, S2/S3 Thunderbolt 42385-94Y FA251 34.95 - - - -98-02 M2 Cyclone, S1 Lightning/White Lightning, S3/S3T Thunderbolt, X1 Lightning H0301.F/H0301.T FA140 31.95 FA140HH 36.95 - -03-10 XB9R/S, XB12R/S, 06-10 XB12X/XT Ulysses H0301.F/H0301.T FA140 31.95 FA140HH 36.95 - -00-08 Blast H0301.F/H0301.T FA140 31.95 FA140HH 36.95 - -

CALIPER TYPEKEVLAR PADS

SUG. RETAIL

DOUBLE-H PADS

SUG. RETAIL

BERINGER4-piston caliper FA158 $31.95 FA158HH $36.95BREMBO4-piston caliper w/ twin pin fixing FA244 34.95 FA244HH 36.954-piston caliper w/ single pin fixing FA95 29.95 FA95HH 36.95EBC4-piston caliper - - 1721-0758 31.95GMA2-piston “A” caliper (large) FA36 29.95 - -4-piston “F” caliper FA115 29.95 1721-0791 36.95HARRISONBillet 4- or 6-piston caliper (early design) FA47 29.95 FA47HH 36.95JAYBRAKE2-piston caliper (small) FA115 29.95 1721-0791 36.95

CALIPER TYPEKEVLAR PADS

SUG. RETAIL

DOUBLE-H PADS

SUG. RETAIL

JAYBRAKE (CONT)6 PF-L (6-piston) - - 1721-0803 $41.95PERFORMANCE MACHINE0053-1604 6-piston caliper (dual pin) FA210 $36.95 - -0052-1601 2- and 4-piston caliper (small) FA115 29.95 1721-0791 36.950056-1600 2-piston rear caliper FA32 29.95 - -6-piston caliper (single pin) FA249 39.95 FA249HH 42.954-piston caliper (large) FA216/3 31.95 1721-0139 36.95PRO ONE2-piston caliper FA47 29.95 FA47HH 36.954-piston caliper FA158 31.95 FA158HH 36.95REVTECH/WILWOODCCI Polished “F” caliper (#50 - 110) FA95 29.95 FA95HH 36.95

AFTERMARKET CALIPERS

DOUBLE-H SINTERED METAL PADS•Feature the HH friction rating – the highest in the industry

•Provide maximum brake effect and last twice as long as organic pads



Kevlar pads

Double-H pads


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

836

CUT-DOWN HANDLEBAR MASTER CYLINDERS•Chrome die-cast aluminum construction•Cut down by .256” for a lower profile•Includes chrome mounting clamp with brake lever

PART # DESCRIPTION SUG. RETAILFOR 96-10 MODELS (EXCEPT 08-10 DRESSER AND 04-10 XL)1914-4011 11/16” bore, dual disc (3/8”-24) $149.951914-4012 9/16” bore, single disc (7/16”-24) 149.951914-4013 5/8” bore, single disc (7/16”-24) 149.95

RESERVOIRS•CNC-machined aluminum in raw or black anodized finish

•Universal model includes rubber diaphragm, fitting and hydraulic line

•PART #s 1731-0179 and 1731-0180 include custom banjo bolt, crush washers and rubber diaphragm

•PART #s 1731-0181 and 1731-0182 include rubber diaphragm, universal bracket and hydraulic line


PART # DESCRIPTION SUG. RETAILFOR MAGURA RADIAL HAND CONTROLS WITH REMOTE RESERVOIR1731-0179 Raw $120.951731-0180 Black anodized 128.95FOR MOST OEM AND AFTERMARKET HAND CONTROLS WITH REMOTE RESERVOIR1731-0182 Raw 104.951731-0181 Black anodized 109.95

CHROME REAR MASTER CYLINDERS•Complete rear master cylinder assemblies•Polished and chrome-plated

PART # DESCRIPTION SUG. RETAIL7805-3043 For 00-07 FXST/FLST/FLHT/FLHR/FLTR;

repl. OEM #41755-99A $92.95DS-530632 For L87-99 FLST; repl. OEM #42467-87C, 42468-87D 179.951731-0188 For 08-10 FLT; repl. OEM #41763-08 125.951731-0121 For L87-99 FXST; repl. OEM #42446-87A 74.951731-0189 For 06-10 FXD; repl. OEM #42474-06 97.951731-0145 For L87-03 XL; repl. OEM #42453-87 104.95

CUSTOM REAR MASTER CYLINDER ASSEMBLY•Chrome-plated CNC-machined billet aluminum with 5/8” bore

•Side exit 1/8” NPT brake line fitting for a straight-back line approach

•Smooth, outward-facing side with back-side mounting holes; 21/4” bolt pattern


NOTE: Use rebuild kit PART #DS-195042.

PART # DESCRIPTION SUG. RETAILDS-530622 Master cylinder $212.95

REAR MASTER CYLINDER REBUILD KITS•Rebuild kits fit a variety of H-D models listed

•Meet or exceed OEM specifications•Include metal piston

PART # DESCRIPTION SUG. RETAILDS-195059 For L87-10 Big Twin (except 08-10 Dressers) and

L87-03 Sportster models; repl. OEM #42382-87A/C $52.95DS-195042 For 84-E87 FXST, FLST; 86-E87 XL; 85 FXE, FXSB;

85-86 FXWG; repl. OEM #42374-82A 17.95DS-195046 For 87-91 FLT models; repl. OEM #42374-86 15.95DS-195040 For 86-E87 FXR models; repl. OEM #42382-82 15.95DS-195047 For 84-85 FLT; repl. OEM #42374-77 15.95DS-243009 Master cylinder rebuild kit for 11/16” bore for

Performance Machine chrome billet classic forward controls 33.95

1731-0019 Master cylinder rebuild kit for 5/8” bore for Performance Machine chrome billet classic forward controls 18.95

FRONT MASTER CYLINDER REBUILD KITS•Meet or exceed OEM specifications

PART # DESCRIPTION SUG. RETAIL

DS-195032 For 96-10 single disc models (except 04-10 XL), 9/16” bore; repl. OEM #45006-96/96c $15.95

DS-195033 For 96-10 dual disc models (except 08-10 Dressers, 04-10 XL), 11/16” bore; repl. OEM #45072-96/96c 15.95

DS-195045 For 87-95 FLT, FLH; 92-95 Dyna Glide (not FXDWG), 87-90 FXRT, FXRS-SP, FXRS-CON, 11/16” bore; repl. OEM #45006-87A 15.95

DS-195043 For 86-95 FXST/FLST, 93-95 FXDWG, 87-94 FXR, 86-95 XL, 5/8” bore; repl. OEM #45072-87 15.95

0617-0038 For 5/8” bore, single disc Cut-Down Handlebar Master Cylinder, PART #1914-4013 29.95

MASTER CYLINDER BOOTS•Replacement rubber boots for rear master cylinders on 84-87 H-D models

•Sold to dealer in packs of five

PART # DESCRIPTION SUG. RETAIL (EA.)DS-195071 For 84-87 Big Twin and XL;

repl. OEM #40922-79 (5-pk.) $2.95

HANDLEBAR MASTER CYLINDERS•Chrome master cylinders with levers, clamp half and hardware

•Fit a variety of models•Sold individually


RETAILDS-290790 11/16” bore, dual disc for 96-10 models (except

04-10 XL, 08-10 FLT); repl. OEM #45013-96 (3/8”-24) $122.95DS-290791 9/16” bore, single disc for 96-10 models (except

04-10 XL); repl. OEM #45019-96 (7/16”-24) 122.95DS-290794 11/16” bore, dual disc for 84-95 models;

repl. OEM #45013-85 (3/8”-24) 161.95

Stock master cylinder

Cut-down master cylinder

1731-01821731-0180

1731-0188

DS-195032 DS-195033

DS-195059

DS-195047

DS-195046

DS-195045

DS-195042

7805-3043

1731-0121

1731-0181

DS-290790


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

837

PART # DESCRIPTION SUG. RETAIL1203-3580 Master cylinder cover gasket $2.95

HANDLEBAR MASTER CYLINDER COVER GASKET•Fits 96-09 OEM-style covers that do not have a sight glass (except 08-09 Dressers, 04-09 XL)

•Sold each

PART # DESCRIPTION SUG. RETAILDS-290621 For all 96-09 Big Twin and 96-03 XL models;

repl. OEM #s 45005-96 and 45042-96 $9.95

HANDLEBAR MASTER CYLINDER RESERVOIR UPDATE KIT•Kit includes decal, sight glass and reservoir gasket

PART # DESCRIPTION SUG. RETAIL1703-0062 For 08-10 FLHT/FLHR/FLTR/FLHX $62.951703-0010 For 99-07 FLT/FLTR/FLHT/FLHR

and 00-01 Softail 52.95

PART # DESCRIPTION SUG. RETAILDS-373402 For 86-03 XL models $42.95

REAR MASTER CYLINDER ASSEMBLY COVER•Chrome-plated, die-cast cover beautifies the plain master cylinder•Allows use of the OEM fluid level sight glass•Features the Blood Groove design used on many Küryakyn accessories

PART # DESCRIPTION SUG. RETAILDS-530602 For 86-99 FLST; repl OEM #41745-79 $16.95

OEM-STYLE REAR MASTER CYLINDER ASSEMBLY COVER•Chrome finish•Sold each

PART # DESCRIPTION SUG. RETAIL1731-0190 For 08-10 Touring models;

repl. OEM #46463-08 $29.95

REAR MASTER CYLINDER COVER•Chrome finish

PART # DESCRIPTION SUG. RETAILFOR 96-09 BIG TWIN AND 96-03 XL MODELS (EXCEPT 08-09 DRESSERS)DS-373870 Finned design $61.95DS-373790 Engine turned design 71.95

HANDLEBAR MASTER CYLINDER COVERS•Chrome billet aluminum construction•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 08-10 FLHT, FLHX, FLHR, FLTR1731-0191 Lefty series, black $85.951731-0192 Lefty series, chrome 85.951731-0195 Waterfall series, black 85.951731-0196 Waterfall series, chrome 85.95FOR 99-10 BIG TWIN (EXCEPT 08-10 DRESSER)1731-0193 Lefty series, black 85.951731-0194 Lefty series, chrome 85.951731-0197 Waterfall series, black 85.951731-0198 Waterfall series, chrome 85.95

REAR MASTER CYLINDER COVERS•Superior quality and style over stock•Constructed of 6061 T6 aluminum•Easy installation•Available in two distinct styles with chrome or black-anodized finish•Made in the U.S.A.

DS-373870

DS-373790

1731-0191 1731-0196

1703-0010

1703-0062

CHROME REAR MASTER CYLINDER ASSEMBLY COVER•Super-clean, one-piece design covers the entire assembly

•Simple, quick installation uses only two fasteners


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

838

PART # DESCRIPTION SUG. RETAILFOR 96-09 BIG TWIN (EXCEPT 08-09 FLHT/FLHR/FLTR/FLHX) AND 96-03 XL0610-0135 Black $54.950610-0136 Chrome 54.950610-0222 Black diamond-edge 69.95FOR 08-10 FLHT/FLHR/FLTR/FLHX0610-0181 Black 54.950610-0182 Chrome 54.950610-0223 Black diamond-edge 69.95

BRAKE MASTER CYLINDER COVERS•CNC-machined from billet aluminum•Include new mounting hardware•Available in chrome, black or diamond edge•Made in the U.S.A.

FITMENT PART # DESCRIPTION SUG. RETAILFRONT APPLICATIONSFor 96-09 Big Twin and XL (all except 08-09 Dressers, 04-09 XL) DS-373452 Joker $37.95 (Repl. OEM #45004-96) DS-373453 Flame 37.95

DS-373451 Hot Head 37.95DS-373454 Smooth 37.95

For 85-95 Big Twin and XL DS-373445 Joker 32.95 (Repl. OEM #45004-85) DS-373447 Flame 32.95


REAR APPLICATIONSFor 99-10 Big Twin (all except 08-10 Dresser; XL/Dyna) DS-373441 Joker 29.95 (Repl. OEM #45057-99) DS-373440 Flame 29.95


CHROME BILLET ALUMINUM MASTER CYLINDER COVERS•Available for most front and rear applications

•Include mounting hardware•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0611-0031 For 08-10 FLT/FLTR/FLHT/FLHR $29.95

FRONT MASTER CYLINDER COVER•Chrome finish•Sold each

PART # DESCRIPTION SUG. RETAILFOR ALL 96-09 BIG TWIN AND 96-03 XL MODELS (EXC. 08-09 DRESSERS)DS-373812 OEM-style cover with sight glass $19.95DS-373813 Smooth-style cover 16.95DS-373814 Groove-style cover 16.95

HANDLEBAR MASTER CYLINDER COVERS•Beautifully chromed finish•Include rubber cover gasket

PART # DESCRIPTION SUG. RETAILDS-373579 For L85-95 H-D front master cylinders;

L87-99 FLST/XL, 91-05 Dyna Glide rear master cylinders (replaces OEM #45004-85) $35.95

MASTER CYLINDER COVER WITH MILLED LINES•Chrome billet aluminum cover features a milled line design

•Made in the U.S.A.HANDLEBAR MASTER CYLINDER COVERS•High-quality covers that add a custom touch•Constructed of 6061 T-6 aluminum•Easy installation•Available in two distinct styles with chrome or black-anodized finish•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 08-10 FLHT, FLHX, FLHR, FLTR0610-0242 Lefty series, black $94.950610-0243 Lefty series, chrome 94.950610-0246 Waterfall series, black 94.950610-0247 Waterfall series, chrome 94.95FOR 96-09 BIG TWIN (EXCEPT 08-09 DRESSER), 96-03 XL0610-0244 Lefty series, black 94.950610-0245 Lefty series, chrome 94.950610-0248 Waterfall series, black 94.950610-0249 Waterfall series, chrome 94.95

PART # DESCRIPTION SUG. RETAIL0617-0059 Repl. sight glass and grommet

for 84-95 master cylinders (5-pk.) $2.95 (ea.)

REPLACEMENT SIGHT GLASS FOR MASTER CYLINDERS•Replaces the sight glass in stock and most aftermarket master cylinders for 84-95 models

•Includes rubber grommet to ensure a leak-proof installation•Sold each to the consumer; sold in pack of five sight glasses and five grommets to dealers

PART # DESCRIPTION SUG. RETAILFOR 08-10 FLHT/FLHR/FLTR/FLHX0610-0183 Black $53.950610-0184 Chrome 53.950610-0224 Black diamond-edge 69.95FOR 05-07 FLHT/FLHR/FLTR/FLHX1731-0166 Black 49.951731-0167 Chrome 49.951731-0174 Black diamond-edge 69.95

REAR

FRONT

0610-0182

0610-01350610-0183

1731-0167

DS-373452 DS-373443 DS-373440

DS-373442

DS-373812 DS-373813 DS-373814

0610-02420610-0243

0610-0247

0610-0224

0610-0246


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

839

PART # FITS MODEL OEM #SUG.

RETAILFRONT BRAKE LINE KITS1741-1791 For 08 FLHT, FLTR, FLHX w/ ABS (upper) 41679-08 $91.951741-1792 For 08 FLHT w/ ABS (lower) 40612-08 91.951741-1794 For 08-10 FLHT, FLHR, FLHX, FLTR w/out ABS 43350-08 101.951741-0868 For 96-07 FLHT, FLHX 45441-03 106.951741-0869 For 04-07 FLHRS (upper) 45510-04 106.951741-1790 For 08 FLHR w/ ABS 41678-08 91.951204-2756 For 94-07 FLHR (except FLHRS/FLHRSEI),

98-06 FLTR/I 45212-97B 97.951741-1793 For 08 FLTR w/ ABS (lower) 42161-08 91.951204-2746 For 99-07 FXST 44813-00A 47.951204-2740 For 84-98 FXST/C, 99 FXSTC, 93-05 FXDWG 45206-97B 40.951741-1786 For 07-10 FXSTC 42148-07 60.951204-2747 For 00-07 FXSTD 44815-00A 47.951204-2748 For 88-03 FXSTS (except Bad Boy) 45208-97B 47.951204-2751 For 99-10 FXSTB 45264-98B 47.951204-2749 For 95-97 FXSTSB, 97-03 FLSTS, 04-06 FXSTS 45209-97B 47.951741-0871 For 05-07 FLSTSC 44894-056 47.951741-0872 For 00-07 FLST, FLSTC, FLSTF 46011-01 47.951204-2750 For 87-99 FLSTC, 90-99 FLSTF, 93-96 FLSTN 45210-97B 47.951741-0873 For 05-06 FLSTN 44892-05 47.951741-1784 For 06-10 FXD, 06 FXDC 45291-06 60.951741-1782 For 06 FXD35, 07 FXDC 42727-06 60.951204-2737 For 00-05 FXD 45202-00A 47.951741-1783 For 06-10 FXDB 42728-06 60.951741-1785 For 06-07 FXDL 44794-06 60.951204-2735 For 01-05 FXDL 44793-01 47.951204-2741 For 96-00 FXDL 45207-97B 97.951204-2742 For 99-05 FXDX, 01-05 FXDXT, 02-03 883R 45287-99C 97.951204-2738 For 95-99 FXD, 88-03 XLH1200, 88-94 FXR,

88-92 FXRS 45202-97B 47.95

STAINLESS STEEL BRAKE LINE KITS•Features clear-coated stainless steel braided lines with chrome fittings

•Meets DOT specifications•Rear lines come with chrome switch junction block and uses standard brake light switch


PART # DESCRIPTION SUG. RETAILUNIVERSAL 3/16” O.D. NYLON BRAKE LINES1740-0002 50’ bulk nylon line $67.951740-0001 25’ bulk nylon line 30.95FITTINGS1742-0061 1/8” male NPT straight master cylinder/caliper 16.951742-0062 1/8” male NPT 90° master cylinder/caliper 16.951742-0063 3/8”-24 male straight master cylinder/caliper 16.951742-0064 7/16”-24 male straight master cylinder/single 16.951742-0065 AN #3 adapter (allows use of any #3 male fitting) 16.95

PART # DESCRIPTION SUG. RETAILFITTINGS (CONT)1742-0066 3/16”-3/16” union $16.951742-0067 Repl. ferrules (10-pk.) 1.951742-0104 3/8”/10mm, straight banjo fitting 11.951742-0105 3/8”/10mm, 35° banjo fitting 11.951742-0106 3/8”/10mm, 90° banjo fitting 11.951742-0107 7/16”, straight banjo fitting 11.951742-0108 7/16”, 35° banjo fitting 11.951742-0109 7/16”, 90° banjo fitting 11.95

UNIVERSAL BRAKE LINE AND FITTINGS•Universal, black 3/16” o.d. nylon brake lines; ideal for custom fabrication

•Semirigid nylon construction offers unparalleled flexibility, allowing the builder ultimate control

•Compression-type chrome fittings with unique concave design

•Line and fittings also work great for custom hydraulic clutch applications

•For off-road and show use only; not DOT certified

•Made from steel, not brass•Line and fittings sold separately•Made in the U.S.A.

NOTE: 04-10 XL models use metric 10mm x 1.25 and 12mm x 1.50 banjo bolts, washers and fittings. All Big Twin (except 08-10 Dressers) and pre-04 XL models use standard 3/8” and 7/16” banjo bolts, washers and fittings. Fittings and washers listed as 3/8” / 10mm can be used in either application.

PART # FITS MODEL OEM #SUG.

RETAILFRONT BRAKE LINE KITS (CONT)1204-2739 For 94-99 FXDS con, 89-93 FXRS con, 95 FXDL 45205-97B $97.951741-1781 For 06-07 FXDWG 45112-06 60.951741-0870 For 04-10 XL 883R/1200R 45409-04 106.951204-2753 For 88-03 XLH883 Hugger, 92-03 XLH883,

90-03 XLH883C/1200C 45201-97B 47.951741-0875 For 04-10 XL 883 45496-04 47.951204-2755 For 96-03 XL1200S 45204-97C 97.951741-0874 For 04-10 XL 883C, 1200C, 08-10 1200N 45489-04 47.951204-2754 For 96-98 XL1200C 45203-97B 47.95REAR BRAKE LINE KITS1741-0877 For 06 FXST (all except FXSTD) 46652-06 74.951741-0211 For 04-05 FXST, 00-06 FLSTC 45133-04 97.951741-1787 For 07 FXST, FXSTC, FXSTB, FLSTF 45133-07 117.951204-2744 For 00-03 FXST/C/S, FLST/C/S/F 44803-00A 67.951204-2745 For 89-99 FXSTC/S, 95-97 FXSTSB, 99-04 FXSTB 44803-99B 40.951741-1788 For 07 FLSTC/N 42283-07 117.951204-2743 For 87-99 FLSTC/S, 90-99 FLSTF 44802-99B 40.951741-1789 For 07 FXSTD, FLSTC, FLSTN,

FLSTSC 05-07 FLHT, FLHR, FLHX, FLTR 40971-00A 117.951204-2736 For 00-07 FXD/FXDWG (all models) 44801-00A 40.951741-0876 For 04-10 XL (all) 45499-04 67.951204-2752 For 00-03 XL 44800-00A 40.95EXTENDED REAR BRAKE LINE KITS1741-0175 For 00-03 FXST/C/S FLST/C/S/F (+2”) - 67.951741-0707 For 04-06 FXST/C/S FLST/C/S/F (+2”) - 97.951741-0176 For 00-03 FXST/C/S FLST/C/S/F (+3”) - 67.951741-0708 For 04-06 FXST/C/S FLST/C/S/F (+3”) - 97.95

1204-2756

1741-0211

1204-2740

1741-0175

1740-0001

1742-0061

1742-00621742-0063

1742-0064

1742-00651742-0066

1742-0067

1742-0107

1742-0108

1742-0109


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

840

CUSTOM BUILDER’S MICROBRAID BRAKE LINE AND FITTINGS•Durable black PVC-coated -2 stainless steel brake line eliminates moisture absorbtion, preventing frequent flushing of brake systems•Small-bore brake line provides increased stopping power over other stainless braided lines•Unmatched flexibility and performance of Microbraid Line make it perfect to route through frames, forklegs and handlebars•Temperature rating exceeds 300°F; pressure rated at over 10,000 psi•Black zinc-plated steel fittings with collars sold separately•Made in the U.S.A.

LENGTH PART # SUG. RETAIL9” DS-098809 $19.9510” 1204-2726 20.9512” DS-098812 20.9514” 1204-2727 21.9515” DS-098815 21.9516” 1204-2728 22.9517” DS-098817 22.9518” DS-098818 23.9519” DS-098819 23.9520” 1204-2729 24.9521” DS-098821 24.9522” 1204-2730 24.95

LENGTH PART # SUG. RETAIL23” DS-098823 $25.9524” 1204-2731 25.9525” DS-098825 25.9526” DS-098826 26.9528” DS-098828 27.9530” DS-098830 28.9532” DS-098832 28.9534” DS-098834 29.9536” DS-098836 31.9538” DS-098838 31.9540” DS-098840 32.9542” DS-098842 32.95

LENGTH PART # SUG. RETAIL43” DS-098843 $33.9544” DS-098844 34.9545” DS-098845 34.9546” DS-098846 34.9547” DS-098847 35.9550” DS-098850 36.9552” DS-098852 37.9554” DS-098854 37.9556” DS-098856 39.9558” DS-098858 40.9560” DS-098860 41.9561” DS-098861 41.95

LENGTH PART # SUG. RETAIL62” DS-098862 $42.9564” DS-098864 43.9566” DS-098866 44.9568” DS-098868 45.9569” 1204-2732 46.9570” DS-098870 46.9571” 1204-2733 47.9572” DS-098872 47.9574” DS-098874 49.9576” DS-098876 50.9578” DS-098878 51.9580” DS-098880 52.95

UNIVERSAL STAINLESS STEEL BRAKE LINES AND CHROME FITTINGS•Top-quality steel-braided brake lines, banjo bolts, brake line fittings and crush washers provide consistent, reliable performance

•Lines are available in 9” through 80” lengths and are clear-coated•Feature chrome-plated AN-3 ends•Meet DOT MVSS-106 specifications•Banjo bolts and fittings are chrome-plated and sold separately•Made in the U.S.A.

NOTE: 04-10 XL models use metric 10mm x 1.25 and 12mm x 1.50 banjo bolts, washers and fittings. All Big Twin (except 08-10 Dressers) and pre-04 XL models use standard 3/8” and 7/16” banjo bolts, washers and fittings. Fittings and washers listed as 3/8”/10mm can be used in either application.

BRAKE LINES

1741-1795

Universal Brake Lines

1742-01751742-01741742-0173

1742-0171

1742-0169

1742-01661742-01671742-0161

1742-0177

PART # DESCRIPTION SUG. RETAILBULK -2 STAINLESS STEEL BRAKE LINE1741-1795 12’ $61.951741-1796 25’ 122.95FITTINGS1742-0176 Hose union 15.951742-0177 Hose collar (6-pk.) 7.951742-0161 3/8”-24 banjo bolt 5.951742-0162 7/16”-24 banjo bolt 5.951742-0163 1.00” x 10 banjo bolt 5.951742-0164 1.25” x 10 banjo bolt 5.951742-0160 3/8”-24 double banjo bolt 6.951742-0165 3/8”-24 straight male adapter 15.95

PART # DESCRIPTION SUG. RETAILFITTINGS (CONT)1742-0166 7/16”-24 straight male adapter 15.951742-0167 3/8” straight banjo 16.951742-0169 3/8”, 20° banjo 16.951742-0171 3/8”, 90° banjo 19.951742-0168 7/16” straight banjo 17.951742-0170 7/16”, 20° banjo 17.951742-0172 7/16”, 90° banjo 20.951742-0173 3/8”-24 straight female adapter 15.951742-0174 1/8” NPT straight male adapter 15.951742-0175 1/8” NPT 90° male adapter 15.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

841

PART # DESCRIPTION SUG. RETAILFITTINGSDS-098147 3/8” / 10mm banjo x AN-3 male straight $8.95DS-098150 3/8” / 10mm banjo x AN-3 male 35° 10.95DS-098151 3/8” / 10mm banjo x AN-3 male 90° 10.95DS-098152 7/16” banjo x AN-3 male straight 8.95DS-098153 7/16” banjo x AN-3 male 35° 10.95DS-098154 7/16” banjo x AN-3 male 90° 10.951742-0120 12mm banjo x AN-3 male straight 9.951742-0121 12mm banjo x AN-3 male 35° 10.951742-0122 12mm banjo x AN-3 male 90° 10.951742-0045 3/8”/10mm banjo x AN-3 male 35° short w/ brake light switch mount 19.951742-0046 3/8”/10mm banjo x AN-3 male 90° short w/ brake light switch mount 19.951742-0047 3/8”/10mm banjo x AN-3 male 90° long w/ brake light switch mount 19.95DS-098300 3/8”/10mm banjo x 1/8” NPT 35° w/ brake light switch mount 19.95DS-098301 3/8”/10mm banjo x 1/8” NPT 90° short w/ brake light switch mount 19.95DS-098302 3/8”/10mm banjo x 1/8” NPT 90° long w/ brake light switch mount 19.95DS-098633 AN-3 union 7.95DS-098396 AN-3 male x 3/8” inverted flare straight 5.95DS-098244 AN-3 male x 1/8” NPT male straight 3.95DS-098279 AN-3 male x 1/8” NPT male 90° 7.95DS-098281 AN-3 male x 3/8”-24 inverted flare 45° 11.95DS-098282 AN-3 x 3/8”-24 inverted flare 90° short 11.95DS-098283 AN-3 x 3/8”-24 inverted flare 90° long 12.95DS-098284 AN-3 x 3/8”-24 inverted flare 150° 12.95DS-098380 AN-3 x 3/8” inverted flare 90°-120° 14.95DS-098293 AN-3 x 1/8” NPT male 45° 11.95DS-098290 3/8”-24 inverted flare front brake junction 24.95DS-098291 1/8” NPT front brake junction 24.95DS-098298 AN-3 male tee 14.95DS-098296 3/8”-24 dual disc tee 56.951742-0048 Wide glide front brake tee 48.951742-0049 Narrow glide front brake tee 48.951204-2724 Universal rear brake tee w/ block and brake light switch hole 30.951204-2725 Rear brake tee w/ brake light switch hole 29.951742-0058 Universal rear brake tee w/brake light switch hole 42.95

UNIVERSAL STAINLESS STEEL BRAKE LINES AND CHROME FITTINGS (CONT)


RETAILCRUSH WASHERSDS-098105 3/8” crush washers (10-pk.) $.95DS-098106 7/16” crush washers (10-pk.) .951742-0115 10mm crush washers (10-pk.) .951742-0116 12mm crush washers (10-pk.) .95


RETAILBANJO BOLTS1742-0044 3/8”-24 banjo bolt w/ brake

light switch mount $8.95DS-098109 3/8”-24 banjo bolt, 5.95DS-098117 3/8”-24 dual banjo bolt, 7.951204-2723 3/8”-24 banjo bolt, (3/4” L

minus head) 5.95DS-098115 7/16”-24 banjo bolt 5.95


RETAILBANJO BOLTS (CONT)1742-0050 7/16”-24 banjo bolt

w/ step down to 3/8” $5.951742-0117 10mm x 1.25mm double

banjo bolt 7.951742-0118 10mm x 1.25mm banjo bolt 6.951742-0119 12mm x 1.50mm banjo bolt 6.951742-0159 10mm x 1.0mm banjo bolt

w/ bleeder fit 10.95

DS-098147 DS-098150

DS-098151

DS-098152 DS-098153 DS-098154

DS-098300DS-098301

DS-098302

DS-098396 DS-098244DS-098282

DS-098283

DS-098284

DS-098298

DS-098296

1742-0048

1742-0049

1742-0044

1742-0050

DS-098109 1204-2723DS-098117DS-098115

DS-098106

1742-0058

1204-2724

1204-2725

DS-098293

DS-098290 DS-098291

DS-098380

DS-098279

DS-098633

DS-098281


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

DESIGNER SERIES BRAIDED FRONT BRAKE LINE KITS•Perfectly matches color and weave of all other Magnum braided cables and lines

•Factory crimped fittings offer an attractive, sleek appearance compared to plumb-your-own lines

•Crystal-clear Teflon® outer jacket offers exceptional protection against scuffing paint or chrome and will never discolor

•All brazed construction eliminates leaks, alignment problems and threaded connections at the puck

•Bullet-proof Kevlar® inner construction provides extreme high performance/safety ratings with minimal line expansion for vastly improved brake lever feel

•Direct bolt-on lower assembly in conjunction with alternative length upper lines with AN3 connection makes for easy installation

•Two-piece design allows easier and less costly brake line changes when installing new handlebars – simply replace the upper line

•Exceeds all DOT FMVSS-106 Specifications•Made in the U.S.A.

NOTE: Upper, mid and lower kits must be purchased separately.

NOTE: Upper line length is determined by measuring the routing path from the top of the lower triple tree to the master cylinder.

NOTE: ABS lower lines run from calipers to ABS unit. ABS mid lines run from ABS unit to fairing.

NOTE: On ABS models line from fairing to hand control uses a Designer Series Upper Brake Line. Will need to measure for exact applications.

842

PART # FITS MODEL STYLESUG.

RETAILSTERLING CHROMITE II1204-3701 84-10 FXST/I, FXSTC/I, FXSTB/I, FXSTD/I;

93-08 FXDWG/I, 10 FXDWG Single Disc $77.951741-1860 08-10 FXDF Dual disc 109.951741-1615 00-10 FLSTC/I, FLSTF/I, FLSTN/I, 10 FLSTFB Single Disc 77.951204-3702 87-99 FLSTC/I, FLSTF/I, FLSTN/I Single Disc 77.951204-3703 87-03 XLH 883/C/D HUG, XL 1200; 95-10

FXD/I, FXDC/I, 01-10 FXDL/I, 06-08 FXDB/I, 06 FXDI35 Single Disc 77.95

1204-3704 96-03 XL 1200S; 02-03 883R; 98-07 FXD, FXDXT, 93-95 FXDL Dual disc 113.95

1741-1857 08-10 FLHR/I, FLHRC/I, FLHT, FLHTC/I, FLHTCU/I, FLHX (ABS) Dual disc 164.95

1741-1859 08-09 FLTR/I, 10 FLTRX (ABS) Dual disc 164.951741-1636 08-10 FLHR/I, FLHRC/I, FLHT, FLHTC/I,

FLHTCU/I, FLHX, FLTR Dual disc 113.95

PART # FITS MODEL STYLESUG.

RETAILSTERLING CHROMITE II (CONT)1204-3705 94-07 FLHR/I, FLHRC/I, FLHRS/I FLHRSEI,

FLHT, FLHTC/I, FLHTCU/I Dual disc $113.951741-0473 04-10 XL 883/L/C, XL 1200C/N Single Disc 77.951741-0474 04-08 XL 883R, 1200R Dual disc 113.95BLACK PEARL1741-1864 08-10 FXDF Dual disc 109.951741-1861 08-10 FLHR/I, FLHRC/I, FLHT, FLHTC/I,

FLHTCU/I, FLHX, FLTR (ABS) Dual disc 164.951741-1863 08-09 FLTR/I, 10 FLTRX (ABS) Dual disc 164.951741-1673 08-10 FLHR/I, FLHRC/I, FLHT, FLHTC/I,

FLHTCU/I, FLHX, FLTR Dual disc 113.951741-1072 94-07 FLHR/I, FLHRC/I, FLHRS/I FLHRSEI,

FLHT, FLHTC/I, FLHTCU/I Dual disc 113.95

LOWER BRAKE LINE KITS

PART # DESCRIPTION SUG. RETAILSTERLING CHROMITE II1741-1858 For 08-09 FLHR/I, FLHRC/I, FLHT, FLHTC/I,

FLHTCU/I, FLHX, FLTR/I (ABS) $74.95

PART # DESCRIPTION SUG. RETAILBLACK PEARL1741-1862 For 08-10 FLHR/I, FLHRC/I, FLHT, FLHTC/I,

FLHTCU/I, FLHX, FLTR/I (ABS) $74.95

MID BRAKE LINES

LENGTH

3/8”/10MM, 35°

7/16”, 35°

3/8”/10MM, 90°

7/16”, 90°

3/8”/10MM, 180° 7/16”, 180°

FOR ALL MODELS (EXCEPT 04-10 XL W/ DUAL DISC)11” 1741-0775 1741-0792 1741-0339 1741-0349 1741-0379 1741-038912” 1741-0776 1741-0793 1741-0340 1741-0350 1741-0380 1741-039013” 1741-0777 1741-0794 1741-0341 1741-0351 1741-0381 1741-039114” 1741-0778 1741-0795 1741-0342 1741-0352 1741-0382 1741-039215” 1741-0779 1741-0796 1204-3706 1204-3707 1204-3710 1204-371117” 1741-0780 1741-0797 1204-3712 1204-3713 1204-3716 1204-371719” 1741-0781 1741-0798 1204-3718 1204-3719 1204-3722 1204-372321” 1741-0782 1741-0799 1204-3724 1204-3725 1204-3728 1204-372923” 1741-0783 1741-0800 1204-3730 1204-3731 1204-3734 1204-3735

LENGTH

3/8”/10MM, 35°

7/16”, 35°

3/8”/10MM, 90°

7/16”, 90°

3/8”/10MM, 180° 7/16”, 180°

FOR ALL MODELS (EXCEPT 04-10 XL W/ DUAL DISC) (CONT)25” 1741-0784 1741-0801 1204-3736 1204-3737 1204-3740 1204-374127” 1741-0785 1741-0802 1204-3742 1204-3743 1204-3746 1204-374729” 1741-0786 1741-0803 1741-0343 1741-0353 1741-0383 1741-039331” 1741-0787 1741-0804 1741-0344 1741-0354 1741-0384 1741-039433” 1741-0788 1741-0805 1741-0345 1741-0355 1741-0385 1741-039535” 1741-0789 1741-0806 1741-0346 1741-0356 1741-0386 1741-039637” 1741-0790 1741-0807 1741-0347 1741-0357 1741-0387 1741-039739” 1741-0791 1741-0808 1741-0348 1741-0358 1741-0388 1741-0398

STERLING CHROMITE II UPPER BRAKE LINES

Upper brake lines

Lower lines

Upper lines

Teflon® jacket

Braiding

Kevlar® reinforcement

Teflon® tubing

Lower line kitBlack Pearl

Lower line kit Sterling Chromite II

1741-1857

Lower line

ABS

Midline


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

843

PART #SUG.

RETAIL

1204-3706 $47.951204-3707 47.951204-3710 47.951204-3711 47.951204-3712 48.951204-3713 48.951204-3716 48.951204-3717 48.951204-3718 50.951204-3719 50.951204-3722 50.951204-3723 50.951204-3724 50.951204-3725 50.951204-3728 50.951204-3729 50.951204-3730 52.951204-3731 52.95

PART #SUG.

RETAIL

1204-3734 $52.951204-3735 52.951204-3736 52.951204-3737 52.951204-3740 52.951204-3741 52.951204-3742 53.951204-3743 53.951204-3746 53.951204-3747 53.951741-0339 46.951741-0340 46.951741-0341 46.951741-0342 47.951741-0343 54.951741-0344 55.951741-0345 57.951741-0346 57.95

PART #SUG.

RETAIL

1741-0347 $57.951741-0348 57.951741-0349 46.951741-0350 46.951741-0351 46.951741-0352 47.951741-0353 54.951741-0354 55.951741-0355 57.951741-0356 57.951741-0357 57.951741-0358 57.951741-0379 46.951741-0380 46.951741-0381 46.951741-0382 47.951741-0383 54.951741-0384 55.95

PART #SUG.

RETAIL

1741-0385 $57.951741-0386 57.951741-0387 57.951741-0388 57.951741-0389 46.951741-0390 46.951741-0391 46.951741-0392 47.951741-0393 54.951741-0394 55.951741-0395 57.951741-0396 57.951741-0397 57.951741-0398 57.951741-0709 46.951741-0710 46.951741-0711 46.951741-0712 47.95

PART #SUG.

RETAIL

1741-0713 $47.951741-0714 47.951741-0715 48.951741-0716 48.951741-0717 48.951741-0718 50.951741-0719 50.951741-0720 50.951741-0775 46.951741-0776 46.951741-0777 69.951741-0778 47.951741-0779 47.951741-0780 48.951741-0781 50.951741-0782 50.951741-0783 52.951741-0784 52.95

PART #SUG.

RETAIL

1741-0785 $53.951741-0786 54.951741-0787 55.951741-0788 57.951741-0789 57.951741-0790 57.951741-0791 57.951741-0792 46.951741-0793 46.951741-0794 46.951741-0795 47.951741-0796 47.951741-0797 48.951741-0798 50.951741-0799 50.951741-0800 52.951741-0801 52.951741-0802 53.95

PART #SUG.

RETAIL

1741-0803 $54.951741-0804 55.951741-0805 57.951741-0806 57.951741-0807 57.951741-0808 57.951741-1674 50.951741-1675 50.951741-1676 52.951741-1677 52.951741-1678 53.951741-1679 54.951741-1680 55.951741-1681 57.951741-1682 50.951741-1683 50.951741-1684 52.951741-1685 52.95

PART #SUG.

RETAIL

1741-1686 $53.951741-1687 54.951741-1688 55.951741-1689 57.951741-1690 50.951741-1691 50.951741-1692 52.951741-1693 52.951741-1694 53.951741-1695 54.951741-1696 55.951741-1697 57.95

PRICE LIST

STOCK REFERENCE CHART

LENGTH

3/8”/10MM, 35°

3/8”/10MM, 90°

3/8”/10MM, 180°

19” 1741-1674 1741-1682 1741-169021” 1741-1675 1741-1683 1741-169123” 1741-1676 1741-1684 1741-169225” 1741-1677 1741-1685 1741-1693

LENGTH

3/8”/10MM, 35°

3/8”/10MM, 90°

3/8”/10MM, 180°

27” 1741-1678 1741-1686 1741-169429” 1741-1679 1741-1687 1741-169531” 1741-1680 1741-1688 1741-169633” 1741-1681 1741-1689 1741-1697

LENGTH 12MM, 90° 12MM, 35° 12MM, 180°FOR 04-10 XL MODELS W/ DUAL DISC13” 1741-0709 1741-0710 1741-071115” 1741-0712 1741-0713 1741-071417” 1741-0715 1741-0716 1741-071719” 1741-0718 1741-0719 1741-0720

STERLING CHROMITE II UPPER BRAKE LINE KITS BLACK PEARL UPPER BRAKE LINES

DESIGNER SERIES BRAIDED FRONT BRAKE LINE KITS (CONT)

BRAIDED CUSTOM SINGLE DISC FRONT BRAKE LINES•Perfectly matches the color and weave of all other Magnum cables and lines•Polished stainless braid is brighter than standard stainless, and black pearl comes with black-chrome fittings

•Crystal clear Teflon® outer jacket offers exceptional protection against scuffing paint or chrome and will never discolor from sunlight

•Factory crimped polished chrome fittings give attractive, sleek appearance compared to plumb-your-own lines


•All lines (except 04-10 XL) have a 7/16” banjo fitting on the master cylinder end and a 90° 3/8”/10mm banjo fitting on the caliper end; 04-10 XL lines have a 10mm banjo fitting on the master cylinder end and a 10mm 60° banjo fitting on the caliper end

•All fittings are highly polished and chrome plated•Exceeds all DOT FMVSS-106 specifications•Made in the U.S.A.

Teflon® jacket

Braiding


Teflon® tubing

1741-0098

FITS MODEL

FRONT UPPER BRAKE LINE LENGTH

TOP BANJO

96-03 XL 883, 99-03 XL 883C, 96-03 XL 1200C 13” 180°96-03 XL 1200, 96-99 FXD 17” 35°96-98 XL1200C 13” 35°96-03 XL1200S 15” 35°05-10 XL 883L, 06-10 XL 1200L 14” 35°04-09 XL 883 12” 35°07 XL50, 07-10 XL 883C, 09-10 XL 883N, 04-10 XL1200C, 04-10 XL 1200N 17” 35°04-07 XL 1200R, 05-07 XL 883R 17” 35°02-03 XL 883R 17” 35°96-00 FXDS-CON 23” 35°06-10 FXD, 06 FXDC 17” 180°

FITS MODEL


TOP BANJO

00-05 FXD/I, 05 FXDC/I 13” 35°07-10 FXDC, 06 FXD35 19” 180°99-05 FXDX/I, 01-03 FXDXT 17” 35°06-09 FXDL/I 21” 35°01-05 FXDL/I 17” 35°96-00 FXDL/I 21” 35°08-10 FXDF 19” 90°96-05 FXDWG/I 21” 180°06-08 FXDWG/I, 06-10 FXDB 23” 180°10 FXDWG 19” 90°98-07 FLTR/I, 96-10 FLHR/I, 96-10 FLHRC/I, 04-07 FLHRS/I 23” 180°08-10 FLTR, 10 FLTRX 21” 35°

FITS MODEL


TOP BANJO

98-10 FLHT/I, 96-10 FLHTC/I, 96-10 FLHTCU/I, 96 FLTCU, 06-10 FLHX 19” 35°08-09 FLHT/I, FLHTC/I, FHTCU/I 21” 35°99-10 FXST/I, 00-07 FXSTD/I 19” 35°99-09 FXSTB/I 14” 180°08-09 FXCW, 08-10 FXCWC 21” 35°96-99 FLSTF 17” 180°00-10 FLSTF 21” 35°10 FLSTFB 17” 35°96-99 FLSTC, 96 FLSTN 19” 180°00-08 FLSTC, 06 FLST, 05-10 FLSTN/I 19” 35°09-10 FLSTC, 07-10 FXSTC 21” 180°

90°

35°

180°

Sterling Chromite II

Polished Stainless

Black Pearl

FOR ALL MODELS (EXCEPT 04-10 XL W/ DUAL DISC)

BRAIDED CUSTOM SINGLE DISC FRONT BRAKE LINES continued on next page


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

844

LENGTH90° TOP ANGLE

35° TOP ANGLE

180° TOP ANGLE

SUG. RETAIL

40” 1741-1247 1741-1243 1741-1646 $66.9542” 1741-1248 1741-1637 1741-1258 66.9543” 1741-1249 1741-1638 1741-1647 68.9544” 1741-1645 1741-1639 1741-1648 69.95


35° TOP ANGLE

180° TOP ANGLE

SUG. RETAIL

45” 1741-1250 1741-1244 1741-1649 $69.9546” 1741-1251 1741-1245 1741-1650 69.9548” 1741-1252 1741-1246 1741-1259 71.9550” 1741-1253 1741-1640 1741-1260 71.95


35° TOP ANGLE

180° TOP ANGLE

SUG. RETAIL

52” 1741-1254 1741-1641 1741-1261 $71.9554” 1741-1255 1741-1642 1741-1262 73.9556” 1741-1256 1741-1643 1741-1263 75.9558” 1741-1257 1741-1644 1741-1651 75.95

BLACK PEARL


35° TOP ANGLE

180° TOP ANGLE

SUG. RETAIL

40” 1741-1328 1741-1324 1741-1705 $56.9542” 1741-1329 1741-1698 1741-1339 56.9543” 1741-1330 1741-1699 1741-1706 57.9545” 1741-1331 1741-1325 1741-1707 59.95


35° TOP ANGLE

180° TOP ANGLE

SUG. RETAIL

46” 1741-1332 1741-1326 1741-1708 $59.9548” 1741-1333 1741-1327 1741-1340 61.9550” 1741-1334 1741-1700 1741-1341 61.9552” 1741-1335 1741-1701 1741-1342 61.95


35° TOP ANGLE

180° TOP ANGLE

SUG. RETAIL

54” 1741-1336 1741-1702 1741-1343 $63.9556” 1741-1337 1741-1703 1741-1344 65.9558” 1741-1338 1741-1704 1741-1709 65.95


60° TOP ANGLE

180° TOP ANGLE

SUG. RETAIL

40” 1741-1652 1741-1660 1741-1665 $66.9542” 1741-1653 1741-1264 1741-1666 66.9544” 1741-1654 1741-1661 1741-1667 69.95


60° TOP ANGLE

180° TOP ANGLE

SUG. RETAIL

46” 1741-1655 1741-1265 1741-1668 $69.9548” 1741-1656 1741-1266 1741-1669 71.9550” 1741-1657 1741-1662 1741-1670 71.95


60° TOP ANGLE

180° TOP ANGLE

SUG. RETAIL

52” 1741-1658 1741-1663 1741-1671 $71.9554” 1741-1659 1741-1664 1741-1672 73.95


60° TOP ANGLE

180° TOP ANGLE

SUG. RETAIL

36” 1741-0743 1741-0323 1741-0759 $63.9538” 1741-0744 1741-03241 1741-0760 63.9540” 1741-0745 1741-0325 1741-0761 66.9542” 1741-0746 1741-0326 1741-0762 66.9543” 1741-0747 1741-0327 1741-0763 68.9544” 1741-0748 1741-0328 1741-0764 68.95


60° TOP ANGLE

180° TOP ANGLE

SUG. RETAIL

45” 1741-0749 1741-0329 1741-0765 $69.9546” 1741-0750 1741-0330 1741-0766 69.9548” 1741-0751 1741-0331 1741-0767 71.9550” 1741-0752 1741-0332 1741-0768 71.9552” 1741-0753 1741-0333 1741-0769 71.9554” 1741-0754 1741-0334 1741-0770 73.95


60° TOP ANGLE

180° TOP ANGLE

SUG. RETAIL

56” 1741-0755 1741-0335 1741-0771 $75.9558” 1741-0756 1741-0336 1741-0772 75.9560” 1741-0757 1741-0337 1741-0773 76.9562” 1741-0758 1741-0338 1741-0774 78.951 SUG. RETAIL $66.95.

FITS MODELFRONT BRAKE LINE LENGTH BANJO

00-05 FXD 40 38°07-09 FXDC 46” 180°01-05 FXDL 42” 35°06-09 FXD, FXD35, FXDL, 06 FXDC 43” 35°06-09 FXDB 46” 180°08 FXCW/C 50” 35°85-99 FXSTC; 85-90 FXST/I; 93-05 FXDWG 48” 180°88-03 FXSTS, 06-07 FXDWG 50” 180°84-85 FXE, FXEF; 84-87 FXR, FXRC, FXRC, FXRDG, FXRS; 84-85 XLH 44” 180°90-99 FLSTF/I; 93-96 FLSTN; 91 FXDB; 87-99 FLSTC/I 42” 180°


05-09 FLSTN 44” 35°08-10 FLSTSB 45” 180°05-07 FLSTSC 44” 35°97-90 FLST; 95-99 FXD; 88-94 FXR; 88-92 FXRS 43” 180°99-09 FXSRB/I 43” 180°99-09 FXST; 97-03 FLSTS, 04-06 FXSTS/I; 00-08 FLST/I; 00-07 FXSTD/I; 00-07 FLSTF; 95-97 FXSTSB; 06 FLST 45” 35°07-09 XL 1200N 42” 60°04-08 XL 883L; 06-08 XL 1200L 42” 60°04-09 XL 883 38” 180°


05-09 XL 883; 06-08 XL 1200L 40” 60°92-95 XLH 883 Deluxe; 87-03 XLH 883 Hugger; 88-03 XLH 1200 43” 180°92-03 XLH 883 Std; 99-03 XL 883C; 96-03 XL 1200C 38” 180°86-91 XLH 883 Std; 87 XL 883 Hugger; 87-94 FXLR 42” 180°


35° TOP ANGLE

180° TOP ANGLE

SUG. RETAIL

36” 1741-0138 1741-0721 1741-0098 $63.9538” 1741-0139 1741-0722 1741-0099 63.9540” 1741-0140 1741-0723 1741-0100 66.9542” 1741-0141 1741-0724 1741-0101 66.9543” 1741-0317 1741-0725 1741-0321 68.9544” 1741-0142 1741-0726 1741-0102 68.9545” 1741-0318 1741-0727 1741-0322 69.9546” 1741-0143 1741-0728 1741-0103 69.95


35° TOP ANGLE

180° TOP ANGLE

SUG. RETAIL

48” 1741-0144 1741-0729 1741-0104 $71.9550” 1741-0145 1741-0730 1741-0105 71.9552” 1741-0146 1741-0731 1741-0106 71.9554” 1741-0147 1741-0732 1741-0107 73.9556” 1741-0148 1741-0733 1741-0108 75.9558” 1741-0149 1741-0734 1741-0109 75.9560” 1741-0150 1741-0735 1741-0110 76.9562” 1741-0151 1741-0736 1741-0111 78.95


35° TOP ANGLE

180° TOP ANGLE

SUG. RETAIL

64” 1741-0152 1741-0737 1741-0112 $78.9566” 1741-0153 1741-0738 1741-0113 80.9568” 1741-0154 1741-0739 1741-0114 80.9570” 1741-0155 1741-0740 1741-0115 82.9572” 1741-0156 1741-0741 1741-0116 84.9574” 1741-0157 1741-0742 1741-0117 84.95

STERLING CHROMITE II

STOCK REFERENCE CHART

FOR ALL MODELS (EXCEPT 04-10 XL)

FOR 04-10 XL


FOR 04-10 XL

FOR 04-10 XL


POLISHED STAINLESS


180° TOP ANGLE

SUG. RETAIL

40” 1741-1710 1741-1715 $56.9542” 1741-1711 1741-1716 56.9544” 1741-1712 1741-1717 59.95


180° TOP ANGLE

SUG. RETAIL

46” 1741-1345 1741-1718 $59.9548” 1741-1346 1741-1719 61.9550” 1741-1347 1741-1720 61.95


180° TOP ANGLE

SUG. RETAIL

52” 1741-1713 1741-1721 $61.9554” 1741-1714 1741-1722 63.95

BRAIDED CUSTOM SINGLE DISC FRONT BRAKE LINES (CONT)


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

SWIVEL-FIT SINGLE DISC FRONT BRAKE LINES•Unique design enables unmatched custom look, adjustability and fit•Factory crimped polished chrome fittings offer an attractive sleek appearance not found on universal plumb-your-own lines and fittings

•Novel swivel-fitting hides under lower triple-tree to correct banjo orientation and eliminates braided line routing kink arising from improper banjo rotation

•Three lower section lengths cover majority of stock fork applications•Kevlar® construction offers extreme high-performance/safety ratings with greatly reduced line expansion for vastly improved brake lever feel

•Crystal clear Teflon® outer jacket offers exceptional protection against scuffing paint or chrome; will never discolor•All lines (except 04-10 XL) use 7/16” banjo fitting at the master cylinder and 90° 3/8” banjo fitting at caliper; 04-09 XL lines use 10mm banjo fitting at master cylinder and 10mm 60° banjo at the caliper

•Perfectly matches the color and weave of Magnum cables and available in STERLING CHROMITE II, polished stainless, and black pearl braid•Made in the U.S.A. and exceeds all DOT FMVSS-106 specifications

845

Teflon® jacket

Braiding


Teflon® tubing

APPLICATIONSTERLING CHROMITE II

POLISHED STAINLESS

BLACK PEARL

TOTAL LENGTH

LOWER SECTION LENGTH

BANJO ANGLE

SOFTAIL99-07 FXST 1741-1191 1741-1353 1741-1272 46” 22” 35°

85-90 FXST/I 1741-1227 1741-1389 1741-1308 48” 22” 180°

07-10 FXSTC 1741-1229 1741-1391 1741-1310 50” 22” 180°

85-99 FXSTC 1741-1227 1741-1389 1741-1308 48” 22” 180°

00-07 FXSTD/I 1741-1191 1741-1353 1741-1272 46” 22” 35°

00-10 FLSTF 1741-1188 1741-1350 1741-1269 45” 20” 35°

90-99 FLSTF 1741-1224 - - 42” 20” 180°

90-96 FLSTN 1741-1224 - - 42” 20” 180°

09-10 FLSTC/I 1741-1226 - - 47” 20” 180°

00-08 FLSTC/I 1741-1188 1741-1350 1741-1269 45” 20” 35°

97-03 FLSTS 1741-1188 1741-1350 1741-1269 45” 20” 35°

10 FLSTFB 1741-1186 1741-1348 1741-1267 40” 20” 35°

04-06 FXSTS 1741-1188 1741-1350 1741-1269 45” 20” 35°

95-97 FXSTSB 1741-1188 1741-1350 1741-1269 45” 20” 35°

06 FLST 1741-1188 1741-1350 1741-1269 45” 20” 35°

APPLICATIONSTERLING CHROMITE II

POLISHED STAINLESS

BLACK PEARL

TOTAL LENGTH

LOWER SECTION LENGTH

BANJO ANGLE

DYNA00-05 FXD 1741-1186 1741-1348 1741-1267 40” 20” 35°

05 FXDC 1741-1186 1741-1348 1741-1267 40” 20” 35°

10 FXDWG 1741-1208 - - 48” 24” 90°

06-08 FXDWG 1741-1230 1741-1392 1741-1311 50” 24” 180°

93-05 FXDWG 1741-1227 1741-1389 1741-1308 48” 22” 180°

06-10 FXDB 1741-1227 1741-1389 1741-1308 48” 22” 180°

91 FXDB 1741-1224 - - 42” 20” 180°

XL04-10 XL883C 1741-1242 - 1741-1323 42” 20” 60°

09-10 XL883N 1741-1242 - 1741-1323 42” 20” 60°

04-10 XL1200C 1741-1242 - 1741-1323 42” 20” 60°

07 XL50 1741-1242 - 1741-1323 42” 20” 60°

07-10 XL1200N 1741-1242 - 1741-1323 42” 20” 60°

86-91 XLH 1741-1224 - - 42” 20” 180°

87 XL883 HUG 1741-1224 - - 42” 20” 180°

LENGTHBANJO BEND

20” LOWER SECTION LENGTH



STERLING CHROMITE II40” 35° 1741-1186 1741-1187 -

90° 1741-1194 1741-1195 1741-119642” 180° 1741-1224 1741-1225 -

90° 1741-1197 1741-1198 1741-119945” 35° 1741-1188 1741-1189 -

90° 1741-1200 1741-1201 1741-120246” 35° 1741-1190 1741-1191 -

90° 1741-1203 1741-1204 1741-120548” 180° 1741-1226 1741-1227 -

35° 1741-1192 1741-1193 -90° 1741-1206 1741-1207 1741-1208

50” 180° 1741-1228 1741-1229 1741-123090° 1741-1209 1741-1210 1741-1211

52” 180° 1741-1231 1741-1232 1741-123390° 1741-1212 1741-1213 1741-1214

54” 180° 1741-1234 1741-1235 1741-123690° 1741-1215 1741-1216 1741-1217

56” 180° 1741-1237 1741-1238 1741-123990° 1741-1218 1741-1219 1741-1220

58” 90° 1741-1221 1741-1222 1741-1223

LENGTHBANJO BEND




POLISHED STAINLESS40” 35° 1741-1348 1741-1349 -

90° 1741-1356 1741-1357 1741-135842” 180° 1741-1386 1741-1387 -

90° 1741-1359 1741-1360 1741-136145” 35° 1741-1350 1741-1351 -

90° 1741-1362 1741-1363 1741-136446” 35° 1741-1352 1741-1353 -

90° 1741-1365 1741-1366 1741-136748’ 180° 1741-1388 1741-1389 -

35° 1741-1354 1741-1355 -90° 1741-1368 1741-1369 1741-1370

50” 180° 1741-1390 1741-1391 1741-139290° 1741-1371 1741-1372 1741-1373

52” 180° 1741-1393 1741-1394 1741-139590° 1741-1374 1741-1375 1741-1376

54” 180° 1741-1396 1741-1397 1741-139890° 1741-1377 1741-1378 1741-1379

56” 180° 1741-1399 1741-1400 1741-140190° 1741-1380 1741-1381 1741-1382

58” 90° 1741-1383 1741-1384 1741-1385

LENGTHBANJO BEND




BLACK PEARL40” 35° 1741-1267 1741-1268 -

90° 1741-1275 1741-1276 1741-127742” 180° 1741-1305 1741-1306 -

90° 1741-1278 1741-1279 1741-128045” 35° 1741-1269 1741-1270 -

90° 1741-1281 1741-1282 1741-128346” 35° 1741-1271 1741-1272 -

90° 1741-1284 1741-1285 1741-128648” 180° 1741-1307 1741-1308 -

35° 1741-1273 1741-1274 -90° 1741-1287 1741-1288 1741-1289

50” 180° 1741-1309 1741-1310 1741-131190° 1741-1290 1741-1291 1741-1292

52” 180° 1741-1312 1741-1313 1741-131490° 1741-1293 1741-1294 1741-1295

54” 180° 1741-1315 1741-1316 1741-131790° 1741-1296 1741-1297 1741-1298

56” 180° 1741-1318 1741-1319 1741-132090° 1741-1299 1741-1300 1741-1301

58” 90° 1741-1302 1741-1303 1741-1304

PART #SUG.

RETAIL

1741-1186 $64.951741-1187 64.951741-1188 67.951741-1189 67.951741-1190 67.951741-1191 67.951741-1192 69.951741-1193 69.951741-1194 64.951741-1195 64.951741-1196 64.95

PART #SUG.

RETAIL

1741-1197 $64.951741-1198 64.951741-1199 64.951741-1200 67.951741-1201 67.951741-1202 67.951741-1203 67.951741-1204 67.951741-1205 67.951741-1206 69.951741-1207 69.95

PART #SUG.

RETAIL

1741-1208 $69.951741-1209 69.951741-1210 69.951741-1211 69.951741-1212 69.951741-1213 69.951741-1214 69.951741-1215 71.951741-1216 71.951741-1217 71.951741-1218 73.95

PART #SUG.

RETAIL

1741-1219 $73.951741-1220 73.951741-1221 73.951741-1222 73.951741-1223 73.951741-1224 64.951741-1225 64.951741-1226 69.951741-1227 69.951741-1228 69.951741-1229 69.95

PART #SUG.

RETAIL

1741-1230 $69.951741-1231 69.951741-1232 69.951741-1233 69.951741-1234 71.951741-1235 71.951741-1236 71.951741-1237 73.951741-1238 73.951741-1239 73.951741-1240 67.95

PART #SUG.

RETAIL

1741-1241 $67.951741-1242 64.951741-1267 67.951741-1268 67.951741-1269 70.951741-1270 70.951741-1271 70.951741-1272 70.951741-1273 72.951741-1274 72.951741-1275 67.95

PART #SUG.

RETAIL

1741-1276 $67.951741-1277 67.951741-1278 67.951741-1279 67.951741-1280 67.951741-1281 70.951741-1282 70.951741-1283 70.951741-1284 70.951741-1285 70.951741-1286 70.95

CUSTOM APPLICATIONS FOR 04-10 XL (10MM)

STOCK APPLICATIONS

CUSTOM APPLICATIONS FOR ALL MODELS (EXCEPT 04-10 XL)

PRICE LIST


Black Pearl

Polished StainlessSwivel fittings

1741-1186

LENGTH BANJO BEND STERLING CHROMITE II POLISHED STAINLESS BLACK PEARL

38” 60° - - 1741-172442” 60° 1741-1242 1741-1726 1741-132346” 60° 1741-1240 1741-1402 1741-1321

LENGTH BANJO BEND STERLING CHROMITE II POLISHED STAINLESS BLACK PEARL

48” 60° 1741-1241 1741-1403 1741-132250” 60° 1741-1723 1741-1404 1741-1725

PRICE LIST continued on next page.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

846

BRAIDED REAR BRAKE LINE KITS•Brake lines use patented technology to create an exclusive braid that looks like chrome or polished stainless

•Perfectly matches color and weave of all other Magnum cables and lines•Crystal-clear Teflon® outer jacket offers exceptional protection against scuffing paint or chrome and will never discolor

•Bullet-proof Kevlar® inner construction provides extreme high performance/safety ratings with minimal line expansion for vastly improved brake pedal feel

•All fittings are highly polished and chrome plated•Exceeds all DOT FMVSS-106 Specifications•Kits include all parts needed for installation; made in the U.S.A.

Teflon® jacket

Braiding


Teflon® tubing

BRAIDED UNIVERSAL BRAKE LINES•Chromite II brake lines use the patented technology to create an exclusive braid that looks like chrome•Sterling Chromite II braid looks like chrome; polished stainless braid is brighter than standard stainless and black pearl braid comes with black-chrome fittings

•Perfectly matches the color and weave of all other Magnum cables and lines•Crystal-clear Teflon® outer jacket offers exceptional protection against scuffing paint or chrome and will never discolor


•All universal AN-3 fittings are chrome plated•Exceeds all DOT FMVSS-106 specifications•Made in the U.S.A.

LENGTHSTERLING CHROMITE II

POLISHED STAINLESS BLACK PEARL

9” DS-3509 1741-1027 1741-163112” DS-3512 1741-1028 1741-163215” DS-3515 1741-1029 1741-163317” DS-3517 1741-1030 1741-099419” DS-3519 1741-1031 1741-099521” DS-3521 1741-1032 1741-099623” DS-3523 1741-1033 1741-099725” DS-3525 1741-1034 1741-099826” DS-3526 1741-1035 1741-099928” DS-3528 1741-1036 1741-100030” DS-3530 1741-1037 1741-100132” DS-3532 1741-1038 1741-1002







PART #SUG.

RETAIL

1741-0994 $42.951741-0995 44.951741-0996 44.951741-0997 45.951741-0998 46.951741-0999 46.951741-1000 48.951741-1001 48.951741-1002 49.951741-1003 50.951741-1004 50.951741-1005 52.951741-1006 52.951741-1007 54.95

PART #SUG.

RETAIL

1741-1008 $54.951741-1009 54.951741-1010 56.951741-1011 56.951741-1012 57.951741-1013 57.951741-1014 60.951741-1015 60.951741-1016 61.951741-1017 61.951741-1018 63.951741-1019 63.951741-1020 64.951741-1021 64.95

PART #SUG.

RETAIL

1741-1022 $64.951741-1023 64.951741-1024 64.951741-1025 64.951741-1026 64.951741-1027 35.951741-1028 35.951741-1029 36.951741-1030 36.951741-1031 38.951741-1032 38.951741-1033 40.951741-1034 40.951741-1035 40.95

PART #SUG.

RETAIL

1741-1036 $42.951741-1037 42.951741-1038 43.951741-1039 44.951741-1040 44.951741-1041 45.951741-1042 45.951741-1043 47.951741-1044 47.951741-1045 48.951741-1046 48.951741-1047 49.951741-1048 50.951741-1049 50.95

PART #SUG.

RETAIL

1741-1050 $52.951741-1051 52.951741-1052 53.951741-1053 53.951741-1054 55.951741-1055 55.951741-1056 56.951741-1057 56.951741-1058 56.951741-1059 57.951741-1060 57.951741-1061 57.951741-1062 57.951741-1631 42.95

PART #SUG.

RETAIL

1741-1632 $42.951741-1633 42.95DS-3509 39.95DS-3512 39.95DS-3515 40.95DS-3517 40.95DS-3519 42.95DS-3521 42.95DS-3523 44.95DS-3525 44.95DS-3526 44.95DS-3528 46.95DS-3530 46.95DS-3532 47.95

PART #SUG.

RETAIL

DS-3534 $48.95DS-3536 48.95DS-3538 50.95DS-3540 50.95DS-3542 52.95DS-3544 52.95DS-3546 53.95DS-3547 54.95DS-3548 54.95DS-3550 55.95DS-3552 55.95DS-3554 57.95DS-3556 57.95DS-3558 59.95

PART #SUG.

RETAIL

DS-3560 $59.95DS-3562 61.95DS-3564 61.95DS-3566 62.95DS-3568 62.95DS-3570 62.95DS-3572 62.95DS-3574 62.95DS-3576 62.95DS-3578 62.95

PRICE LIST

PART #SUG.

RETAIL

1741-1287 $72.951741-1288 72.951741-1289 72.951741-1290 72.951741-1291 72.951741-1292 72.951741-1293 72.951741-1294 72.951741-1295 72.951741-1296 74.951741-1297 74.951741-1298 74.951741-1299 76.951741-1300 76.95

PART #SUG.

RETAIL

1741-1301 $76.951741-1302 76.951741-1303 76.951741-1304 76.951741-1305 67.951741-1306 67.951741-1307 72.951741-1308 72.951741-1309 72.951741-1310 72.951741-1311 72.951741-1312 72.951741-1313 72.951741-1314 72.95

PART #SUG.

RETAIL

1741-1315 $74.951741-1316 74.951741-1317 74.951741-1318 76.951741-1319 76.951741-1320 76.951741-1321 70.951741-1322 72.951741-1323 67.951741-1348 57.951741-1349 57.951741-1350 61.951741-1351 61.951741-1352 61.95

PART #SUG.

RETAIL

1741-1353 $61.951741-1354 63.951741-1355 63.951741-1356 57.951741-1357 57.951741-1358 57.951741-1359 57.951741-1360 57.951741-1361 57.951741-1362 61.951741-1363 61.951741-1364 61.951741-1365 61.951741-1366 61.95

PART #SUG.

RETAIL

1741-1367 $61.951741-1368 63.951741-1369 63.951741-1370 63.951741-1371 63.951741-1372 63.951741-1373 63.951741-1374 63.951741-1375 63.951741-1376 63.951741-1377 65.951741-1378 65.951741-1379 65.951741-1380 67.95

PART #SUG.

RETAIL

1741-1381 $67.951741-1382 67.951741-1383 67.951741-1384 67.951741-1385 67.951741-1386 57.951741-1387 53.951741-1388 63.951741-1389 63.951741-1390 63.951741-1391 63.951741-1392 63.951741-1393 63.951741-1394 63.95

PART #SUG.

RETAIL

1741-1395 $63.951741-1396 65.951741-1397 65.951741-1398 65.951741-1399 67.951741-1400 67.951741-1401 67.951741-1402 61.951741-1403 63.951741-1404 63.951741-1723 69.951741-1724 67.951741-1725 72.951741-1726 57.95

PRICE LIST (CONT)

FITS MODELSTERLING CHROMITE II PART #

SUG. RETAIL

POLISHED STAINLESS PART #

SUG. RETAIL

08-10 FXST/FLST/FXCW 1741-1629 $110.95 1741-1634 $105.9506-07 FXST 1741-0809 110.95 1741-1070 105.9500-05 FXST, 00-06 FLST 1741-0298 110.95 1741-1069 105.95L87-99 FXST/C, 95-99 FXSTSB 1741-1405 106.95 1741-1063 101.95

FITS MODELSTERLING CHROMITE II PART #

SUG. RETAIL

POLISHED STAINLESS PART #

SUG. RETAIL

08-10 Dyna models 1741-1630 $58.95 1741-1635 $54.9587-99 FLST/C/N/F 1741-1406 110.95 1741-1064 105.9500-07 Dyna models 1741-0297 69.95 1741-1068 65.9591-99 Dyna models 1741-0296 69.95 1741-1067 65.9597-05 FLT/FLHT 1741-1407 111.95 1741-1066 106.95

SWIVEL-FIT SINGLE DISC FRONT BRAKE LINES (CONT)

1741-0298

1741-0296

NOTE: For banjo bolts, fittings and crush washers see page 861.

DS-3519


Black Pearl

Polished Stainless


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

847

1742-0299 1742-03001742-0301

3808-0008

BUILD YOUR OWN (BYO) BRAKE LINES•Meets all DOT EMVSS-106 standards for safe and reliable on-road use•Assembles in only 5 minutes with side cutters or scissors and 7/16” wrench•Features sleek contoured polished stainless and chrome-plated fittings for an uncompromising appearance

•Eliminates guesswork; get the perfect length and banjo rotation every time•Kits come with 3’ or 6’ of non-yellowing clear-coated -3 stainless brake hose to cover most applications

•Kits offer wide application coverage and contain all the components needed to make one complete brake line

•All brake line hose is pressured tested and inspected•Single disc kits for 86-10 models (except 04-10 XL) include one 7/16” and one

3/8”/10mm banjo with hardware, 3’ or 7’ of -3 stainless hose, washers and vice wrench•Dual disc kits for 84-10 Touring models include one chrome-plated manifold, three

3/8”/10mm banjo with hardware, 7’ of -3 stainless hose, washers and vice wrench•Single disc kits for 04-10 XL models include two 10mm banjos with hardware, 3’ or 6’ of stainless hose, washers and vice wrench

•Dual disc kits for 04-10 XL models include one chrome-plated manifold, one 12mm and two 10mm banjos with hardware, 7’ stainless hose, washers and vice wrench

•For the custom builder, all components and hoses are available separately to create and build your own brake or hydraulic clutch line

NOTE: All Build Your Own fittings and hose are specially designed to work solely in conjunction with each other and are not compatible with, or DOT approved, any other product or brand.

NOTE: 04-10 XL models use 10 x 1.25 and 12 x 1.50 banjo bolts, washer and fittings. All Big Twin (except 08-10 Dresser models and pre-04 XL) use 3/8” and 7/16” banjo bolts, washers and fittings. Washers and fittings listed as 3/8”/10mm can be used in either application. For bolts and washers see page 861.

CUT TO LENGTHCUT TO LENGTH PUSH INTO FITTINGPUSH INTO FITTING

SCREW INTO BANJOSCREW INTO BANJO THREAD TOGETHERTHREAD TOGETHER

PART # DESCRIPTION SUG. RETAIL1741-2460 3’ coated (-3) stainless steel brake line $14.951741-2461 6’ coated (-3) stainless steel brake line 19.951741-2462 12’ coated (-3) stainless steel brake line 39.951742-0299 10mm 35° chrome banjo w/fittings 12.951742-0300 10mm 60° chrome banjo w/fittings 12.951742-0301 10mm 90° chrome banjo w/fittings 12.951742-0298 10mm 180° chrome banjo w/fittings 12.951742-0303 12mm 35° chrome banjo w/fittings 12.951742-0304 12mm 90° chrome banjo w/fittings 12.951742-0302 12mm 180° chrome banjo w/fittings 12.95

PART # DESCRIPTION SUG. RETAIL1742-0306 7/16” 35° chrome banjo w/fittings $12.951742-0307 7/16” 90° chrome banjo w/fittings 12.951742-0305 7/16” 180° chrome banjo w/fittings 12.951742-0308 Chrome brake tee for 91-10 Dyna,

86-03 XL (Narrow Glide) 54.951742-0309 Chrome brake tee for 84-07 FLT, FLHT, FLHR,

FLTR, FLHX (non ABS) 54.951742-0310 Chrome brake tee for 08-10 FLT, FLHT, FLHR,

FLTR, FLHX (non ABS) 54.953808-0008 Banjo and fitting vice wrench 14.95

REPLACEMENT COMPONENTS

PART # DESCRIPTION SUG. RETAIL1741-2445 For 04-10 XL models (12mm 35° banjo) $99.951741-2446 For 04-10 XL models (12mm 90° banjo) 99.951741-2444 For 04-10 XL models (12mm 180° banjo) 99.951741-2448 For 84-07 Touring (10mm 35° banjo) 99.951741-2449 For 84-07 Touring (10mm 90° banjo) 99.95

PART # DESCRIPTION SUG. RETAIL1741-2447 For 84-07 Touring (10mm 180° banjo) $99.951741-2451 For 08-10 Touring Non ABS (10mm 35° banjo) 99.951741-2452 For 08-10 Touring Non ABS (10mm 90° banjo) 99.951741-2450 For 08-10 Touring Non ABS (10mm 180° banjo) 99.95

DUAL DISC BRAKE LINE KITS

PART # DESCRIPTION SUG. RETAIL3’ BRAKE LINE1741-2454 For 04-10 XL models (10mm 35° banjo) $39.951741-2455 For 04-10 XL models (10mm 60° banjo) 39.951741-2456 For 04-10 XL models (10mm 90° banjo) 39.951741-2453 For 04-10 XL models (10mm 180° banjo) 39.951741-2458 For 91-10 Dyna models, 84-10 Softail models,

86-03 XL models (7/16” 35° banjo) 39.951741-2459 For 91-10 Dyna models, 84-10 Softail models,


86-03 XL models (7/16” 180° banjo) 39.95

PART # DESCRIPTION SUG. RETAIL6’ BRAKE LINE1741-2464 For 04-10 XL models (10mm 35° banjo) $44.951741-2465 For 04-10 XL models (10mm 60° banjo) 44.951741-2466 For 04-10 XL models (10mm 90° banjo) 44.951741-2463 For 04-10 XL models (10mm 180° banjo) 44.951741-2468 For 91-10 Dyna models, 84-10 Softail models,



86-03 XL models (7/16” 180° banjo) 44.95

SINGLE DISC BRAKE LINE KITS

STEP 1 STEP 2

STEP 3 STEP 4

1742-0298

1742-0309

1741-2457

1741-2445Shown assembled

1742-0302

1741-2461

1742-0308

1742-0306

1742-03071742-0305

1742-0304

1742-0303


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

848

CYCLEFLEX BRAIDED LINE KITS•Braided brake lines exceed OEM pressure specifications, reduce brake line expansion and look good•Feature Teflon® inner liner and stainless steel outer braid for smooth fluid transfer and high strength•Factory-assembled for correct fit and reliability•For off-road and show use only (unless noted)•See following page for applications

3/8”/10mm or 7/16” 12mm

1/8” Male

A B C D E F G H

I J K L M N O

A B

C D

EF G H

I

JK L M N O P Q

3/8”/10mm or 7/16” 12mm

3/8”/10mm or 7/16” 12mm

3/8”/10mm or 7/16” 12mm

3/8”/10mm or 7/16” 12mm

3/8”/10mm or 7/16” 12mm

45° Straight

1/8” Male Long 80°

FRONT HOSES

REAR HOSES

10mm Banjo 90° 90°/120° Short 90° 10mm Banjo 90° 90°/120°

Short 90°

60°

Short 90°

1/8” Male

Long 90°

Straight 3/8” 10mm Banjo 90°

Long 90° Short 90°

45°

Short 90°

Short 90°

90°/120°Straight

1/8” Female Switch

1/8” Female Switch

3/8”/10mm or 7/16” 12mm

10 or 12mm

45°

150° 3/8”/10mm or 7/16” 12mm

10 or 12mm

10 or 12mm

3/8”/10mm or 7/16” 12mm

1/8” Female Pipe

Straight

45°

60°

45°

45°

45° Straight

1/8” Male

3/8”/10mm Banjo 90°

3/8”/10mm Banjo 90°

10 or 12mm

3/8”/10mm Banjo 90°

Long 90°

45°

Short 90°

45°

Long 90°

Short 90°

10 or 12mm

Special line not shown

Long 90°

Straight


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

849

FITS MODELSTAINLESSPART #

RENEGADEPART #

RUSSELLREF. # OEM REF #

LINESPER KIT

HOSEUPPER

STYLELOWER

UPPER LENGTH (INCHES)

LOWER LENGTH (INCHES)

FXST/C/B/D, FLST/C/S/F/N AND FXWGFor 00-07 FXSTD 08774DS 1741-0448 R08774DS/B 45119-00 1 E - 44 -

For 99-10 FXSTB 08770DS - R08770DS 45250-99 1 B - 43 -

For 05-10 FLSTN 1741-0456 - R08764DS 42314-05 1 E - 433/4 -

For 05-10 FLSTN 1741-04571 - R08764SS 42314-05 1 E - 433/4 -

For 05-07 FLSTSC 1741-04591 - R08765SS 45139-05 1 - - 4 -

For 05-07 FLSTSC 1741-0458 - R08765DS 45139-05 1 - - 4 -

For 97-03 FLSTS 08757DS - R08757DS 45091-96 1 B - 43 -

For 96-97 FXSTSB 08761DS - R08761DS 45115-96 1 E - 46 -

For 96-06 FXSTS 08760DS - R08760DS 54110-96 1 B - 50 -

For 88-95 FXSTS 08947DS 1741-0441 R08947DS/B 45110-88A 1 B - 52 -

For 86-10 FLST/F/C, 93-96 FLSTN 1741-08821 - R08745SS - 1 B - 421/2 -

For 86-10 FLST/F/C, 93-96 FLSTN 08745DS 1741-0438 R08745DS/B 45303-89B 1 B - 42 -

For 84-99 FXST 1741-08831 - R08728SS - 1 B - 48 -

For 84-99 FXST/C 08728DS 1741-0435 R08728DS/B 45112-84A 1 B - 47 -

For 00-10 FXST 08771DS - R08771DS 45199-99A 1 B - 48 -

FXEFFor 85 FXEF 08722DS - R08722DS 45121-84 1 B - 42 -

DYNA GLIDE AND FXRFor 06-08 FXDWG 1741-0885 - R08766DS 45112-06 1 B - 50 -

For 93-05 FXDWG 08728DS 1741-0435 R08728DS/B 45112-84A 1 B - 47 -

For 00-05 FXD/05 FXDC 08773DS - R08773DS 45291-00 1 E - 41 -

For 95-99 FXD 08753DS - R08753DS 4511-89A 1 E - 43 -

For 01-03 FXDXT 08772DS - R08777DS 45194-99 3 F L 191/2 191/2

For 99-05 FXDX 08772DS - R08772DS 45194-99 3 F L 191/2 191/2

For 06-10 FXDCI 1741-0888 - R08769DS 42727-06 1 E - 435/8 -

For 06-10 FXDBI 1741-0887 - R08767DS 42728-06 1 - - 47 -

For 06-10 FXDLI 1741-0886 - R08768DS 44797-06 1 - - 435/8 -

For 01-05 FXDL, FXDLI 1741-0880 - R08744DS 44797-01 1 E - 413/8 -

For 92-01 FXDB, FXDC, FXDL 08749DS - R08749DS 45111-89 3 F L 25 20

For 88-98 FXR, FXRS, FXRC 08746DS - R08746DS 45121-88A 1 B - 44 -

For 89-94 FXRS (CON.) 08749DS - R08749DS 45111-89 3 F L 25 20

For 86-87 FXR, FXRC 08722DS - R08722DS 45121-84 1 B - 42 -

For 84-87 FXRS 08722DS - R08722DS 45121-84 1 C - 42 -

For 84 FXRD 08722DS - R08722DS 45121-84 1 B - 42 -

FLT, FLHT, FLHTC/I, FLHR/I AND FLTR/IFor 84-07 FLT/C, FLHT/C, FLHTCU and FLHX 08731DS 1741-0436 R08731DS/B

43349-84A, 43349-96 3 F L 23 17

For 94-07 FLHR/I, FLHRCI and FLTR/I 08756DS 1741-0439 R08756DS/B

44350-96, 44350-96A 3 F L 25 16

For 94-07 FLHR/I, FLHRCI and FLTR/I 1741-08841 - R08756SS

44350-96, 44350-96A 3 F L 25 16

XL AND XLHFor 04-08 XL 883R/1200R 1741-0455 - R08763DS 45319-04 3 F L 193/4 181/2

For 04-10 XL (except 883L)/1200L 1741-0461 - R08794DS 45449-04, 46400-04 1 - - 41 -

For 96-03 XL 1200 STD. 08753DS - R08753DS 45143-88B 1 E - 43 -

For 02-03 883R 08772DS - R08777DS 45194-99 3 F L 191/2” 191/2”

For 86-03 XLH 883 STD. 08735DS 1741-0437 R08735DS/B 45143-86 1 B - 39 -

For 87-95 XLH 883 HUG. 08746DS - R08746DS 45121-88 1 B - 44 -

For 87-98 XLH 883 DLX. 08746DS - R08746DS 45121-88 1 B - 44 -

For 88-98 XL 1200 STD. DLX. 08746DS - R08746DS 45121-88 1 B - 44 -

For 86-87 XLH 1100 08722DS - R08722DS 45121-84 1 B - 42 -

For 96-03 XLH 1200 SPORT 08754DS - R08754DS 45148-96 3 F L 231/2” 19

For 96-03 XLH 1200 CUSTOM 08755DS 1741-0463 R08755DS/B 45084-96 1 E - 40 -

V-RODFor 02-05 V-Rod (VRSCA) 1741-04601 - R08790SS 44454-01 3 - - - -

1 Mach 3 stainless steel fittings.

PART #SUG.

RETAIL

08722DS $35.9508728DS 36.9508731DS 96.9508735DS 34.9508745DS 36.9508746DS 36.9508749DS 97.95

PART #SUG.

RETAIL

08753DS $36.9508754DS 91.9508755DS 35.9508756DS 95.9508757DS 35.9508760DS 36.9508761DS 38.95

PART #SUG.

RETAIL

08770DS $35.9508771DS 36.9508772DS 89.9508773DS 35.9508774DS 38.9508947DS 52.951741-0435 53.95

PART #SUG.

RETAIL

1741-0436 $148.951741-0437 53.951741-0438 52.951741-0439 148.951741-0441 54.951741-0448 56.951741-0455 115.95

PART #SUG.

RETAIL

1741-0456 $47.951741-0457 63.951741-0458 54.951741-0459 68.951741-0460 168.951741-0461 42.951741-0463 53.95

PART #SUG.

RETAIL

1741-0880 $38.951741-0882 55.951741-0883 56.951741-0884 173.951741-0885 38.95

PART #SUG.

RETAIL

1741-0886 $37.951741-0887 40.951741-0888 37.95

BRAIDED BRAKE LINE KITS•Braided brake lines exceed OEM pressure specifications, reduce brake line expansion and look good•Available in stainless and black Renegade styles•Feature Teflon® inner liner and stainless steel outer braid for smooth fluid transfer and high strength•Factory-assembled for correct fit and reliability

NOTE: All measurements are approximate.

NOTE: Russell reference numbers ending in DS, SS and B are clear coated, meet DOT MVSS-571.106 specifications and are 50-state legal.

NOTE: Numbers ending in S are for off-road or show use only.

STOCK LENGTH FRONT BRAKE LINES


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

850

FITS MODELSTAINLESS PART #

RENEGADEPART #

RUSSELL REF. #

LINES PER KIT UPPER

HOSE STYLELOWER UPPER

LENGTH (INCHES) LOWER

FXST, FXSTC, FLST AND FXDWGFor 86-10 FLST/C/F/N 1741-2475 - R08987S 1 - - 441/2” -For 86-10 FLST/C/F/N 1741-2476 - R08988S 1 - - 461/2” -For 86-10 FLST/C/F/N 1741-2477 - R08989S 1 - - 481/2” -For 84-99 FXST, FXSTC and 93-99 FXDWG 08946S 1741-0440 R08946S/B 1 B - 50 -For 88-99 FXST/ FXSTC, 93-05 FXDWG - 1741-0441 R08947B 1 B - 52 -For 84-99 FXST, FXSTC and 93-99 FXDWG 08948S 1741-0442 R08948S/B 1 B - 54 -For 00-10 FXST 1741-0449 - R08729DS - - - 48 -For 00-10 FXST 1741-0450 - R08732DS - - 50 -For 00-10 FXST 1741-0451 - R08740DS - - - 52 -DYNA GLIDEFor 01-05 FXD 1741-0452 - R08748DS - - - 43 -For 01-05 FXD 1741-0453 - R08752DS - - - 45 -For 01-05 FXD 1741-0454 - R08758DS - - - 47 -FLHR, FLTR, FLT, FLHT AND FLHXFor 08-10 FLHX ABS 1741-2336 - R08965S 1 - - 641/2” -For 08-10 FLHX ABS 1741-2337 - R08966S 1 - - 681/2” -For 08-10 FLHX ABS 1741-2338 - R08967S 1 - - 721/2” -For 08-10 FLHX ABS 1741-2339 - R08968S 1 - - 751/2” -For 94-07 FLHR/I/CI, FLTR/I 08997S 1741-0443 R08997S/B 3 F L 271/4” 16”For 94-07 FLHR/I/CI, FLTR/I 08998S 1741-0444 R08998S/B 3 F L 291/4” 16”For 94-07 FLHR/I/CI, FLTR/I 08999S 1741-0445 R08999S/B 3 F L 311/4” 16”For 84-06 FLT,FLHT 1741-2474 - R08986S 1 - - 29 - PART # SUG. RETAIL08946S $37.9508948S 49.9508997S 96.9508998S 97.9508999S 95.95

PART # SUG. RETAIL1741-0440 $54.951741-0441 54.951741-0442 53.951741-0443 149.951741-0444 150.95

PART # SUG. RETAIL1741-0445 $150.951741-0449 39.951741-0450 39.951741-0451 40.951741-0452 37.95

PART # SUG. RETAIL1741-0453 $38.951741-0454 38.951741-2336 41.951741-2337 42.951741-2338 43.95

PART # SUG. RETAIL1741-2339 $44.951741-2474 31.951741-2475 37.951741-2476 37.951741-2477 36.95

EXTENDED-LENGTH FRONT BRAKE LINES

FITS MODEL STAINLESS PART # SUG. RETAIL RUSSELL REF. # OEM REF. # LINES PER KIT HOSE STYLEFXST/ FLST AND FXWGFor 00-06 FLST/C/S/F, 00-05 FXST/S/B/D 08838DS $98.95 R08838DS 45156-00 1 -For 00-06 FLST/C/S/F, 00-05 FXST/B/D/S 1741-08811 115.95 R08838SS - 1 -For 99 FXSTB 08837DS 59.95 R08837DS 45156-89D 1 -For 95-97 FXSTSB 08837DS 59.95 R08837DS 45156-89D 1 -For L87-99 FXST/C/S (mfrd. after 2/1/87) 08837DS 59.95 R08837DS 45156-89D 1 -For L87-99 FLST/C/N/F (mfrd. after 2/1/87) 08839DS 84.95 R08839DS 40957-87A 1 -For 97-99 FLSTS 08839DS 84.95 R08839DS 40957-87A 1 -For 84-E87 FLST and FXST (mfrd. prior to 2/1/87) 08814S 29.95 R08814S 45156-84 1 -For 85-86 FXWG 08810S 24.95 R08810S 41033-82 1 MFXE AND FXSBFor 85 FXE AND FXSB 08810S 24.95 R08810S 41033-82 1 MDYNA GLIDE AND FXRFor 00-07 Dyna Glide (all) 08833DS 42.95 R08833DS 40956-00 1 -For 95-99 FXD 1741-2471 43.95 R08836DS - 1 -For 84-E87 FXR 08813S 24.95 R08813S 40956-82 1 GFLT, FLHT, FLHTC/I, FLHR/I AND FLTR/IFor 97-06 FLHR, FLTR, 06-07 FLHX 1741-0447 64.95 - 40971-97/00 - -For 92-96 FLT, FLHT 1741-0446 87.95 R08842DS 40971-93 - -For 86-91 FLT/FLHT/FLHS 08847DS 32.95 R08847DS 40971-86A 1 KXL AND XLHFor 04-10 XL 1741-0462 79.95 R08841DS 44429-04 - -For 00-03 XL 883/1200 (all) 08835DS 59.95 R08835DS 44438-87B 1 -For L87-99 XL 883/1200 (mfrd. after 2/1/87) 08834DS 59.95 R08834DS 44438-87B 1 -For 86-E87 XL (mfrd. prior to 2/1/87) 08816S 78.95 R08816S 44438-86 2 PFor 86-87 XL 1100 08816S 78.95 R08816S 44438-86 2 P1 Mach 3 stainless steel fitting.

STOCK-LENGTH REAR BRAKE LINES

Stainless rear brake lines

Renegade front brake lines

Stainless front brake lines


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

851

PART # DESCRIPTION SUG. RETAIL1704-0002 Builders kit $649.95

DESCRIPTION RUSSELL REF. # DESCRIPTION QUANTITY4381C R4381C 3/8” -24 inverted flare 24390C R4390C 10mm banjo straight, long 44392C R4392C 12mm banjo straight, long 24391C R4391C 10mm 35° banjo 24394C R4394C 10mm 90° banjo 21742-0057 R2013C Chrome -3 straight hose end 2- R2044C Chrome -3 90° tube 24396C R4396C -3 to 3/8” inverted flare 6DS-097024 R4295C Front tee aluminum 2

DESCRIPTION RUSSELL REF. # DESCRIPTION QUANTITY- R4290C Universal rear tee 2DS-097026 R40517 10mm double banjo bolt 3/8” -24 240509 R40509 10mm single banjo bolt 3/8” -24 1640515 R40515 12mm single banjo bolt 7/16” -24 249005 R49005 10mm crush washer (10-pk.) 349006 R49006 12mm crush washer (10-pk.) 149008 R49008 Replacement olive (10-pk.) 1DS-272185 R40505 Brake switch banjo bolt 2- - Clear coated Pro System I hose 1 25 ft.1 Packaged separately.

STANDARD KIT

KIT COMPONENTS

CHROME FITTINGS

CLEAR BULK LINE SMOKE-TINT BULK LINE

PRO SYSTEM I BIKE BUILDERS KIT•Contains an assortment of components needed for building any motorcycle brake line

•Includes 25 ft. of Pro System I clear-coated stainless steel braided hose, chrome banjos and adapter fittings in a clear plastic case

•See Kit Component chart for listings of all parts and quantities


PART # DESCRIPTION SUG. RETAIL4390C 3/8”/10mm straight banjo $10.954391C 3/8”/10mm 35° banjo 10.954394C 3/8”/10mm 90° banjo 14.954392C 7/16” straight banjo 10.954393C 7/16” 35° banjo 11.954381C Straight 3/8”-24 inverted 17.954382C 45° 3/8”-24 inverted 18.95

PART # DESCRIPTION SUG. RETAIL4384C Short 90° 3/8”-24 inverted $18.954385C Long 90° 3/8”-24 inverted 20.954386C 90°-120° 3/8”-24 inverted flare male 21.951742-0057 -3 straight hose end 15.951742-0025 -3 hose to 3/8”- 24 23.9549008 Repl. olives (10-pk.) 7.95

PART # DESCRIPTION SUG. RETAIL3180 1/8”-3 – 10’ $49.953181 1/8”-3 – 15’ 67.953182 1/8”-3 – 20’ 84.953183 1/8”-3 – 50’ 189.95


RETAIL1204-3480 1/8”-3 – 10’ $68.951204-3482 1/8”-3 – 20’ 97.95

PRO SYSTEM I LINES AND FITTINGS•Allow custom fabrication of brake lines without the requirements of secondary adapters

•Unique extruded cover eliminates the age-old problem of abrasion to painted surfaces

•Hose end design ensures positive seal due to the separation of the sealing function from the hose end retention feature

•Lightweight, high-pressure assembly not only enhances appearance, but delivers the ultimate in pressure performance

•Replacement olives allow reuse of existing fittings•Bulk line is available with clear coating or smoke-tint coating•Smoke tint matches Barnett clear coating on cables•-3 straight hose end for brake line connections•Designed to ensure a positive seal•Use with Pro System 1 braided hose only•Perfect for master cylinder, junction block and caliper connections•Easy assembly•Made in the U.S.A.

NOTE: For show and off-road use only.

NOTE: 04-10 XL models use metric 10mm x 1.25 and 12mm x 1.50 banjo bolts, washers and fittings. All Big Twin (except 08-10 Dressers) and pre-04 XL models use standard 3/8” and 7/16” banjo bolts, washers and fittings. Fittings and washers listed as 3/8”/10mm will work in either application.

1704-0002

3180

4390C 4391C 4394C 4392C 4393C

4381C 4382C

4386C 49008

4385C

4384C

1742-0057

1742-0025


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

852

DESCRIPTIONRUSSELL REF. # DESCRIPTION QUANTITY

4340C R4340C 1/8” make NPT straight end, chrome 24341C R4341C 1/8” male NPT 90° end, chrome 24342C R4342C 3/8-24 male straight, chrome 44343C R4343C 7/16-24 male straight, chrome 41204-4344 R4344C -3 female hose end, chrome 21742-0072 R4345C Chrome 10mm straight banjo 81742-0073 R4346C Chrome 7/16” straight banjo 21742-0074 R4347C Chrome 10mm banjo w/ 35° bend 81742-0075 R4348C chrome 7/16” banjo w/ 35° bend 4DS-097023 R4296C Chrome 3/8-24 brake tee bubble style 149005 R49005 10mm crush washer (10-pk.) 5

PRO SYSTEM II BIKE BUILDERS KIT•Contains an assortment of components needed for building any motorcycle brake line•Features chrome-plated steel fittings with brass ferrules and 25’ of black hose•Direct-fit banjos in straight and 35° styles are also included•See Kit Components chart for listings of all parts and quantities•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL3132 Red line 25’ $45.953134 Black line 25’ 38.953135 Black line 50’ 61.95

PART # DESCRIPTION SUG. RETAILCHROME STEEL FITTINGS1204-4344 AN#3 adapter (allows use of any #3 male fitting) $12.954340C 1/8” male NPT straight master cylinder/caliper 11.954341C 1/8” male NPT 90° master cylinder/caliper 12.954342C 3/8”-24 male straight master cylinder/caliper

(repl. banjo fitting) 6.954343C 7/16”-24 male straight master cylinder/single

(repl. banjo fitting) 14.951742-0073 7/16” straight banjo 11.951742-0075 7/16” 35° banjo 12.951742-0072 3/8”/10mm straight banjo 11.951742-0074 3/8”/10mm 35° banjo 12.9549009 Repl. olives (10-pk.) 13.95

PART # DESCRIPTION SUG. RETAILRENEGADE BLACK STEEL FITTINGS1742-0147 AN#3 adapter (allows use of any #3 male fitting) $17.951742-0152 1/8” male NPT straight master cylinder/caliper 17.951742-0153 1/8” male NPT 90° master cylinder/caliper 20.951742-0154 3/8”-24 male straight master cylinder/caliper

(repl. banjo fitting) 18.951742-0155 7/16”-24 male straight master cylinder/single

(repl. banjo fitting) 26.951742-0149 7/16” straight banjo 17.951742-0151 7/16”/10mm 35° banjo 24.951742-0148 3/8”/10mm straight banjo 23.951742-0150 3/8”/10mm 35° banjo 24.95

PRO SYSTEM II NYLON LINES AND FITTINGS•Custom-fabricate your own lines in two colors•Universal line is manufactured from a semirigid nylon material; allows maximum flexibility•Compression-type chrome or black fittings are easily attached•Line and fittings are sold separately; nylon line is 5/16”•Replacement olives allow reuse of existing fittings•Chrome plated and Renegade black steel fittings sold separately•Made in the U.S.A.

NOTE: For show and off-road use only.


FITTINGS (EA.)

BULK 5/16” LINE

31343132

1742-0150

1742-0148

4340C 4341C

1204-4344

1742-0074

1742-0072

1742-0149

1742-0155

1742-0147

1742-0154

1742-0152

1742-0153

DESCRIPTIONRUSSELL REF. # DESCRIPTION QUANTITY

49006 R49006 12mm crush washer (10-pk.) 349009 R49009 Replacement 5/16” olives (10-pk.) 140515 R40515 Chrome 7/16”-24 banjo bolt 240509 R40509 3/8-24 single banjo bolt 83134 R3134 Pro System II brake tube, black1 25 ft.1 Packaged separately.

PART # DESCRIPTION SUG. RETAIL1704-0205 Builders kit $595.95 KIT COMPONENTS

KIT COMPONENTS (CONT)


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

853

PART # DESCRIPTION SUG. RETAIL1741-2478 For 08-10 FLHT, FLHR, FLHX and FLTR ABS models $38.95

PRO SYSTEM II UNIVERSAL BRAKE HOSE KIT•Makes handlebar swaps on 08-10 FLHT, FLHR, FLHX and FLTR ABS models a breeze•8’ of black Pro System II brake tubing, two chrome Pro System banjos and sealing washers are included in the kit

•Fabrication, combined with maximum flexibility is allowed•Features a non-abrasive finish that will not harm painted surfaces•Upper hose only

NOTE: Not DOT approved; for show and off road use only.

PRO SWIVEL™ BRAKE HOSES•Coated stainless steel outer band with chrome fittings•Features Russell’s exclusive 360° swivel banjo system (patent pending)•The banjo is incorporated at the caliper end of the hose assembly•Makes the rotation alignment hassle free•Engineered using two O-rings for a positive seal•Supported by 305 stainless steel retention pin for permanent attachment•Using all stock mounting locations and hardware, simply route your hose and attach the banjo at the master cylinder

•All lines (except PART #s 1741-2491, 1741-2492, 1741-2493, 1741-2494) use a 7/16” banjo at the master cylinder and a 3/8” 90° banjo at the caliper

•Meet or exceeds DOT FMVSS-571-106 standards

PART # RUSSELL REF # LENGTH SUG. RETAIL7/16” STRAIGHT UPPER BANJO1741-2479 R08970 40” $58.951741-2481 R08972 42” 58.951741-2482 R08973 44” 59.951741-2484 R08975 46” 60.951741-2486 R08977 48” 61.957/16” 35° UPPER BANJO1741-2480 R08971 40” 59.951741-2483 R08974 44” 60.951741-2485 R08976 46” 60.957/16” 90° UPPER BANJO1741-2487 R08978 48” 65.951741-2488 R08979 50” 65.951741-2489 R08980 52” 66.951741-2490 R08981 54” 66.953/8” 90° UPPER BANJO FOR CUSTOM APPLICATIONS1741-2491 R08982 48” 59.951741-2492 R08983 50” 60.951741-2493 R08984 52” 61.951741-2494 R08985 54” 61.95

DESCRIPTION PART #FXST, FXSTC, FLST, FLSTS, FLSTFFor 86-10 FLST, FLSTC, FLSTF, FLSTN 1741-2482For 86-10 FLST, FLSTC, FLSTF, FLSTN (+2”) 1741-2484For 86-07 FLST, FLSTC 1741-2486For 97-03 FLSTS 1741-2482For 97-03 FLSTF (+2”) 1741-2486For 84-98 FXST, FXSTC 1741-2486For 99-10 FXST 1741-2485For 99-10 FXST 1741-2486For 00-10 FXSTB 1741-2482For 00-10 FXSTB (+2”) 1741-2484For 00-10 FXSTB (+4”) 1741-2486For 00-07 FXSTD 1741-2485For 04-06 FXSTS 1741-2485DYNA GLIDEFor 93-05 FXDWG 1741-2486For 95-07 FXD Super Glide 1741-2485For 95-99 FXD 1741-2483For 00-05 FXD 1741-2480For 00-05 FXD (+4”) 1741-2483

DESCRIPTION PART #DYNA GLIDE (CONT)For 00-05 FXD (+6”) 1741-2485For 06-10 FXD 1741-2486For 05-10 FXDC 1741-2485For 06-10 FXDC (+2”) 1741-2483XLHFor 86-03 XLH 883 1741-2479For 86-03 XLH 883 (+2”) 1741-2481For 86-03 XLH 883 (+4”) 1741-2482For 86-03 XLH 883 (+6”) 1741-2484For 87-98 XLH 883 Deluxe 1741-2484For 87-98 XLH 883 Deluxe (+2”) 1741-2486For 88-95 XLH 883 Hugger 1741-2484For 88-95 XLH 883 Hugger (+2”) 1741-2486For 96-03 XLH 883 Hugger (+4”) 1741-2483For 88-98 XLH 1200 1741-2484For 96-03 XLH 1200 1741-2483For 96-03 XLH 1200C 1741-2480For 96-03 XLH 1200C (+4”) 1741-2483For 96-03 XLH 1200C (+6”) 1741-2485

BRAKE HOSES

OEM APPLICATION CHART


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

854


RETAIL1742-0002 3/8”-24, banjo bolt $14.951742-0003 7/16”-24 banjo bolt 16.951742-0004 3/8”-24 double banjo bolt 11.951742-0124 12mm x 1.50mm banjo bolt 14.951742-0034 10mm x 1.25” banjo bolt 14.951742-0005 1/8” NPT, #3 male 9.951742-0006 #3 male tee 27.951742-0007 1/8” NPT, #3 male w/ 45° bend 20.951742-0008 1/8” NPT, #3 male w/ 90° bend 15.951742-0001 3/8”-24 inverted flare, #3 male (pr.) 18.951742-0009 3/8”-24 inverted flare, #3 male w/ 90° long bend 17.951742-0010 3/8”-24 inverted flare, #3 male w/ 45° bend 17.951742-0011 3/8”-24 inverted flare, #3 male w/ 90° bend 16.951742-0014 3/8”-24 inverted flare, #3 male w/ 90° and 120° bends 31.951742-0015 3/8”-24 inverted flare, #3 male w/ 150° bend 22.951742-0012 Front narrow glide male junction block, #3 male 55.951742-0013 Long forward control, #3 male w/ 90° bend 36.95


RETAIL1742-0016 Front Wide Glide male junction block, #3 male $54.951742-0127 12mm banjo x -3 male straight 14.951742-0129 12mm banjo x -3 male 35° 14.951742-0131 12mm banjo x -3 male 90° 13.951742-0017 3/8” / 10mm banjo x #3 male 90° 15.951742-0068 3/8” / 10mm banjo x #3 male 45° 13.951742-0019 3/8” / 10mm banjo x #3 male 35° 15.951742-0021 3/8” / 10mm banjo x #3 male straight 14.951742-0018 7/16” banjo x #3 male 90° 14.951742-0070 7/16” banjo x #3 male 45° 13.951742-0020 7/16” banjo x #3 male 35° 14.951742-0022 7/16” banjo x #3 male straight 14.951742-0023 3/8” / 10mm short rear brake banjo, w/ brakelight

switch mount, #3 male w/ 90° bend 33.951742-0024 3/8” / 10mm short rear brake banjo, w/ brakelight

switch mount, #3 male w/ 35° bend 32.95


RETAIL1741-0065 9” $35.951741-0066 12” 36.951741-0067 15” 37.951741-0068 17” 37.951741-0069 18” 38.951741-0070 19” 38.951741-0071 21” 39.951741-0072 23” 39.951741-0073 25” 40.95


RETAIL1741-0074 26” $39.951741-0075 28” 41.951741-0076 30” 40.951741-0077 32” 42.951741-0078 34” 43.951741-0079 38” 45.951741-0080 40” 45.951741-0081 42” 46.951741-0082 43” 46.95


RETAIL1741-0083 44” $47.951741-0084 45” 47.951741-0085 47” 48.951741-0086 50” 49.951741-0087 52” 49.951741-0088 54” 50.951741-0089 56” 51.951741-0090 58” 51.951741-0091 60” 52.95


RETAIL1741-0092 62” $53.951741-0093 64” 53.951741-0094 66” 54.951741-0095 68” 55.951741-0096 70” 55.951741-0097 72” 56.95

RENEGADE UNIVERSAL BRAKE LINES AND FITTINGS•Preassembled with Russell high-performance #3 stainless steel braided hose that features a rugged Teflon® inner liner and crimp-on female swivel hose ends

•Ready for adapter fittings, these build-it-yourself brake lines are the newest innovation from Russell•Feature Twilight Black finish; abrasion-resistant against painted surfaces•Black hose appearance is perfect for retros and late-model customs•Provide superior braking performance with braided Powerflex•Minimize line expansion•Work with all brake fluids as well as stock, custom and racing applications•Matching Renegade reusable adapter fittings feature a Twilight Black finish and are sold separately•Meet DOT MVSS-106 guidelines•Made in the U.S.A.

NOTE: 04-10 XL models use metric 10mm x 1.25 and 12mm x 1.50 banjo bolts, washers and fittings. All Big Twin (except 08-10 Dressers) and pre-04 XL models use standard 3/8” and 7/16” banjo bolts, washers and fittings. Fittings and washers listed as 3/8”/10mm can be used in either application.

BRAKE LINES

ADAPTER FITTINGS

Brake lines

1742-0004

1742-0003

1742-0002

1742-0005

1742-0006

1742-0007

1742-0008

1742-0001

1742-0009

1742-0010

1742-0011

1742-00141742-0015

1742-0012

1742-0016 1742-00171742-0019

1742-0021

1742-00231742-0013

1742-0024


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

855

LENGTH MACH 3 SUG. RETAIL STREET LEGAL SUG. RETAIL

6” - - 58002S $20.959” 5801SS $27.95 58012S 21.9512” 5802SS 28.95 58022S 22.9515” 5803SS 29.95 58032S 23.9516” - - 58362S 23.9517” 5804SS 29.95 58042S 23.9518” 5821SS 29.95 58212S 24.9519” 5805SS 30.95 58052S 24.9521” 5806SS 30.95 58062S 25.9523” 5807SS 31.95 58072S 25.9525” 5808SS 31.95 58082S 26.9526” 5809SS 32.95 58092S 26.9528” 5810SS 32.95 58102S 27.9530” 5811SS 33.95 58112S 27.9532” 5812SS 33.95 58122S 28.9534” 5813SS 34.95 58132S 28.9536” - - 58642S 29.9538” 5814SS 35.95 58142S 29.9540” 5824SS 36.95 58242S 30.95

LENGTH MACH 3 SUG. RETAIL STREET LEGAL SUG. RETAIL

42” 5815SS $36.95 58152S $31.9543” 5825SS 37.95 58252S 31.9544” 5826SS 37.95 58262S 31.9545” 5819SS 37.95 1741-2470 32.9546” - - 58372S 32.9547” 5816SS 38.95 58162S 32.9550” 5820SS 39.95 58202S 33.9552” 5817SS 39.95 58172S 34.9554” 5818SS 40.95 58182S 34.9556” 5827SS 40.95 58272S 35.9558” 5828SS 41.95 58282S 35.9560” 5829SS 42.95 58292S 36.9562” 5830SS 42.95 58302S 36.9564” 5831SS 43.95 58312S 37.9566” 5832SS 43.95 58322S 38.9568” 1204-5833 44.95 1204-8323 38.9572” - - 1204-8325 40.9574” - - 1204-8326 40.9580” - - 1204-8330 42.95

STAINLESS MACH 3 SUG. RETAIL CHROME STEEL SUG. RETAIL DESCRIPTION

- - DS-097026 $12.95 3/8”-24 double-banjo bolt

40509SS $11.95 40509 4.95 3/8”-24 banjo bolt

- - 40515 11.95 7/16”-24 banjo bolt

- - 1742-0123 11.95 12mm x 1.5 banjo bolt

- - R40508 11.95 10mm x 1.25 double banjo bolt

- - R40514 10.95 10mm x 1.25 banjo bolt

4047SS 16.95 4047C 6.95 3/8” / 10mm banjo, #3 male, straight

4050SS 14.95 4050C 6.95 3/8” / 10mm banjo, #3 male, 35°

4051SS 15.95 4051C 6.95 3/8” / 10mm banjo, #3 male, 90°

- - 1742-0069 7.95 3/8” / 10mm banjo x #3 male 45°

4052SS 16.95 4052C 6.95 7/16” banjo, #3 male, straight

4053SS 16.95 4053C 6.95 7/16” banjo, #3 male, 35°

4054SS 16.95 4054C 7.95 7/16” banjo, #3 male, 90°

- - 1742-0071 7.95 7/16” banjo x #3 male 45°

- - 1742-0128 8.95 12mm banjo x #-3 male straight

- - 1742-0130 8.95 12mm banjo x #-3 male 35°

- - 1742-0132 8.95 12mm banjo x #-3 male 90°

- - 4244C 3.95 1/8” NPT, #3 male, straight

4279SS 23.95 4279C 8.95 1/8” NPT, #3 male, 90°

4293SS 21.95 4293C 14.95 1/8” NPT, #3 male, 45°

- - 4298C 18.95 1/8” NPT, #3, male “T”

1742-0125 18.95 4396C 8.95 3/8”-24 inverted flare, #3 male, straight (pr.)

1742-0314 18.95 4380C 14.95 3/8”-24 inverted flare, #3 male, junction tube fitting

1742-0311 12.95 4281C 7.95 3/8”-24 inverted flare, #3 male, 45° tube fitting

1742-0312 13.95 4282C 9.95 3/8”-24 inverted flare, #3 male, 90° short tube fitting

- - 4283C 8.95 3/8”-24 inverted flare, #3 male, 90° long tube fitting

1742-0313 17.95 4284C 8.95 3/8”-24 inverted flare, #3 male, 150° tube fitting

- - 6033C 6.95 #3 male union

1742-0026 20.95 - - 3/8”-24 inverted flare, #3 male adapter

1742-0103 24.95 - - Rear brake tee, inline with bracket

1742-0156 19.95 - - Rear Brake tee, inline without bracket

- - 1204-4303 19.95 Rear junction block 35° banjo fitting male AN#3 w/ brake light switch housing

- - 1204-4304 19.95 Rear junction block short 90° banjo fitting male AN#3 w/ brake light switch housing

- - 1204-4305 26.95 Rear junction block long 90° banjo fitting male AN#3 w/ brake light switch housing

- - 1204-4306 36.95 Wide Glide front fork junction block for AN#3

- - 1204-4307 38.95 Narrow Glide front fork junction block for AN#3

STREET LEGAL™ AND MACH 3 UNIVERSAL BRAKE LINES AND FITTINGS•Mach 3 stainless steel brake lines are clear-coated and have stainless steel fittings

•Street Legal brake lines are clear-coated with chrome fittings

•Program-designed #3 size for easy brake line hookups on almost any application

•Adapter fittings are available separately for multiple applications

•Street Legal and Mach 3 brake lines are DOT standard MVSS-106 approved



ADAPTER FITTINGS

BRAKE LINES

Mach 3

Street legal

40509SS

405094047SS/4047C

4050SS/4050C

4051SS/4051C 4052SS/

4052C

4054SS/4054C

4244SS/4244C

4279SS/4279C

4293SS/4293C

4298SS/4298C

4396C

4380C

4284C

1742-0156

6033C

4281C4282C 4283C

1204-4307

1204-4306

1742-0103

1742-0026 1204-43031204-4304

1204-4305


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

856

PLAN-O-GRAM•Get the best return on your Goodridge clear line display•Hangs on 2’ x 2’ of wall space or stands on its own as floor display•Includes universal brake hose assemblies, fittings and adapters needed to build a front or rear brake line kit for most H-D models

•Also includes laminated application guide, peg hooks and reorder tags

PART # DESCRIPTION SUG. RETAILHIDE-A-LINE BRAKE LINE KIT1724-0001 For single-line front 87-07 FLST, FXST, FXD and 87-03 XLH $104.95

PART # DESCRIPTION SUG. RETAILREPL. AND ADDITIONAL COMPONENTS1724-0002 -2 hose, 6-ft. $49.951724-0003 -2 hose, 12-ft. 98.951724-0004 -2 hose, 25-ft. 205.951741-1419 -2 hose, clear-coat, 12-ft. 116.951741-1420 -2 hose, clear-coat, 25-ft. 242.951742-0076 -2 mandrel 49.951742-0077 Straight 3/8”/10mm stainless steel -2 banjo 33.951742-0078 20° 3/8”/10mm stainless steel -2 banjo 33.951742-0079 45° 3/8”/10mm -2 banjo 50.951724-0011 -2 straight hose end 33.951724-0012 -2 45° hose end 69.951724-0013 -2 90° hose end 69.951724-0014 Straight 3/8”-24 to -3 fitting 12.95

PART # DESCRIPTION SUG. RETAILREPL. AND ADDITIONAL COMPONENTS (CONT)B592-03C Straight 3/8”/10mm -3 banjo $14.95B592-03-04C Straight 7/16” -3 banjo 14.95B593-03C 30° 3/8”/10mm -3 banjo 14.95B593-03-04C 30° 7/16” -3 banjo 14.95B594-O3C 45° 3/8”/10mm -3 banjo 14.95B597-03C 30° side 3/8”/10mm -3 banjo 15.95B599-03C 90° 3/8”/10mm -3 banjo 24.95775-03C 3/8” -24 banjo bolt 8.95775-44C 7/16” -24 banjo bolt 11.951742-0093 -2 banjo ferrules (6-pk) 22.9544516-6 3/8”/10mm crush washers (6-pk) 3.9544518-6 7/16” crush washers (6-pk) 3.95

HIDE-A-LINE BRAKE LINE KIT•Route your hoses out of sight•Features high-performance -2 stainless braided hose and stainless steel fittings

•Smaller diameter of the hose results in a firmer lever feel and quicker response for shorter stopping distances

•Kit includes: 8’ of -2 stainless steel braided PTFE hose, straight 7/16” stainless banjo adapter, 90° 3/8” stainless steel banjo adapter, straight -2 hose to -3 female hose end, 7/16”-24 stainless steel bolt, 3/8”-24 stainless steel bolt, 3/8” crush washer and 7/16” crush washer

PART #KIT QTY.

REPLACEMENTPARTS QTY. DESCRIPTION

SUG. RETAIL

PROFESSIONAL BUILDER BRAKE LINE KIT PARTS LIST5091-03CH 2 2 3/8”/10mm straight banjo, short $12.955091-03-04CH 2 2 7/16” straight banjo, short 22.955092-03CH 4 4 3/8”/10mm straight banjo, long 14.955092-03-04CH 2 2 7/16” straight banjo, long 14.955094-03CH 2 2 3/8”/10mm 45° banjo 15.955070-03CH 6 6 3/8”/10mm 70° banjo 23.956001-03CH 2 2 -3 female hose end 14.956091-03CH 2 2 -3 90° female hose end 22.951032403CH 6 6 -3 to 3/8”-24 I.F. fitting 12.95600-03-25 25’ 25’ -3 stainless steel hose 112.951724-0005 - 6’ -3 black-coated hose 42.951724-0006 - 12’ -3 black-coated hose 85.951724-0007 - 25’ -3 black-coated hose 177.951724-0008 - 6’ -3 carboline hose 42.951724-0009 - 12’ -3 carboline hose 85.951724-0010 - 25’ -3 carboline hose 177.95

PART #KIT QTY.

REPLACEMENTPARTS QTY. DESCRIPTION

SUG. RETAIL

PROFESSIONAL BUILDER BRAKE LINE KIT PARTS LIST (CONT)GM100 1 1 -3 mandrel $36.95MCHD-001 2 2 Front tee bar 72.95MCHD-002 2 2 Universal rear brake tee 42.95MCHD-004 2 2 Rear brake tee, Softail 72.95773-03CH 2 2 Double banjo bolt, 3/8”-24 6.95775-03CH 16 16 Single banjo bolt, 3/8”-24 6.95775-03LCH 2 2 Single banjo bolt, 3/8”-24, long 4.95775-44CH 2 2 Single banjo bolt, 7/16”-24 4.951742-0097 - 1 Straight 12mm banjo fitting 20.9544516-6 30 - 3/8”/10mm crush gasket -44516-6 - 6 3/8”/10mm crush gasket 3.9544518-6 12 - 7/16” crush gasket -44518-6 - 6 7/16” crush gasket 3.951205-03B-10 12 12 -3 ferrule (10-pk.) 21.95GP101 1 - Socket plate -MCHD-003 1 - Rear brake tee, Sportster -

PART # DESCRIPTION SUG RETAIL

G950 Professional builder brakeline kit $989.95

DELUXE PROFESSIONAL BRAKE LINE BUILDER KIT•Build custom or service stock brake lines with professional results•Ideal for building custom brake lines for stock or custom Harleys, Indians and many others•Each kit contains high-quality stainless steel braided hose, chromed banjos, bolts and other fittings•Comes with enough brake line and hardware to build several complete front and rear brake lines•Kit contains all items listed below in chart; number of pieces for each component is listed in kit quantity column•Replacement parts can be purchased separately according to PART # in chart; quantity is listed in replacement parts quantity column

NOTE: 04-10 XL models use metric 10mm x 1.25 and 12mm x 1.50 banjo bolts, washers and fittings. All Big Twin except 08-10 Dressers and pre-04 XL models use standard 3/8” and 7/16” banjo bolts, washers and fittings. Fittings and washers listed as 3/8”/10mm will fit either application.

PART # QTY.HOSESD-80312 1

D-80314 2

D-80315 1

D-80316 1

D-80317 2

D-80318 2

D-80321 1

PART # QTY.HOSES (CONT)D-80326 1

D-80328 2

D-80330 2

D-80334 2

D-80338 1

D-80340 1

D-80342 1

PART # QTY.HOSES (CONT)D-80343 2

D-80346 1

D-80350 1

D-80354 1

FITTINGS592-03CH 4

592-03-04CH 2

PART # QTY.FITTINGS (CONT)593-03CH 2

593-03-04CH 2

599-03CH 2

646-03CH 1

691-03CH 4

666-03CH 2

666-03CH 2

PART # QTY.FITTINGS (CONT)775-03LCH 6

775-44CH 3

MCHD005 1

MCHD014 1

MCHD024 1

GD-MANIFOLD 1

GD-MANIFOLD-07 1

PART # DESCRIPTION

9903-0294 Plan-O-Gram display

1724-0001

1742-0077

1724-00131724-0014

1724-0011

1724-00121742-0079

1742-0093775-03C775-44C


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

857

DESCRIPTION PART # SUG. RETAIL90-10 FLST MODELS08-10 FLSTSB 1741-1741 $70.9509-10 FLSTC 1741-1743 70.9590-08 FLSTC 1741-1742 70.9590-10 FLSTF 1741-1742 70.9505-10 FLSTN 1741-1745 70.9597-03 FLSTS 1741-1744 70.9584-10 FXST/FXCW MODELS08-10 FXCW/FXCWC 1741-1746 70.9584-07 FXST 1741-1748 70.95L98-05 FXSTB 1741-1750 70.9507-10 FXSTC 1741-1747 70.9584-99 FXSTC 1741-1748 70.9500-07 FXSTD 1741-1751 70.9596-06 FXSTS 1741-1749 70.9591-10 FXD AND FXDWG MODELS08-10 FXDF 1741-1771 162.9500-05 FXD 1741-1753 70.9506-10 FXDB 1741-1755 70.9505 FXDC 1741-1753 70.9506-10 FXD/C 1741-1758 70.9506-09 FXDL 1741-1756 70.95

DESCRIPTION PART # SUG. RETAIL91-10 FXD AND FXDWG MODELS (CONT)01-05 FXDL 1741-1754 $70.9593-05 FXDWG 1741-1752 70.9506-08 FXDWG 1741-1757 70.9584-10 FLT, FLHR, FLHT, FLHS, FLHX AND FLTR MODELS08-10 FLHR, FLHT/C/CU, FLHRS, FLHX AND FLTR w/o ABS 1741-1762 162.9584-07 FLT, FLHT, FLHS 1741-1759 162.9594-07 FLHR, FLTR, FLHX 1741-1760 162.9504-07 FLHRS 1741-1761 162.9586-10 XL MODELS04-10 XL 883 1741-1736 70.9586-03 XL 883 Standard 1741-1738 70.9586-91 X 883 Deluxe 1741-1738 70.9596-03 XL 883 Hugger 1741-1739 70.9504-10 XL 883C 1741-1735 70.9599-03 XL 883C 1741-1738 70.9505-10 XL883L 1741-1737 70.9507-10 XL1200L 1741-1737 70.9504-09 XL 1200 1741-1735 70.9596-03 XL 1200 1741-1738 70.9596-03 XL 1200C 1741-1740 70.95

APPLICATION PART # SUG. RETAIL00-10 FLST MODELS08-10 FLST (ALL) 1741-1767 $92.9507 FLSTF 1741-1765 92.9507 FLSTSC/FLSTN/FLSTC 1741-1766 92.9500-06 FLST/C/F/N/S/SC 1741-1763 76.95L87-10 FXST/FXCW MODELS08-10 FXST (ALL) 1741-1767 92.9507 FXSTD 1741-1766 92.9506 FXST/I/S/SI/B/DI 1741-1764 76.95

APPLICATION PART # SUG. RETAIL08-10 FXD AND FXDWG MODELS08-10 All applications 1741-1768 $70.9508-10 FLHR, FLTR AND FLHT MODELS08-10 FLHR, FLTR, FLHT w/o ABS 1741-1770 70.95

EBONY 2 BRAKE LINE KITS•Ebony cover has been added to Goodridge’s premium stainless, braided, PTFE-lined hose•This braided cover is coated with PVC for abrasion protection, producing a great finish of unmatched quality•The combination of the PTFE inner and stainless steel outer braid eliminates the spongy feeling under heavy braking conditions•Includes hardware•All brake lines are stock length

DESCRIPTION STOCK LENGTH STD SUG. RETAIL +2” SUG. RETAIL +4” SUG. RETAIL +6” SUG. RETAIL87-10 FLST MODELS09-10 FLSTSB 46.50” 1741-1729 $72.95 - - - - - -09-10 FLSTC 44.50” 1741-1730 72.95 - - - - - -87-08 FLST/C, 90-10 FLSTF, 93-96 FLSTN 40.25” HD9209-D 72.95 HD9209-F $72.95 - - HD9209-J $72.9597-03 FLSTS 42.25” HD9209-F 72.95 - - - - - -84-10 FXST/FXCW MODELS08-10 FXCW/FXCWC 45.00” 1741-1430 72.95 - - - - - -84-07 FXST 48.00” HD9209-J 72.95 1741-0009 72.95 - - 1741-0025 72.9588-06 FXSTS 49.00” HD9209-M 72.95 - - - - - -

OEM-STYLE DOT BRAKE LINE KITS•Stock-length brake line kits meet DOT/TUV specifications, making them street-legal on any road worldwide

•Feature abrasion-resistant PVC-coated stainless steel braided hose with a PTFE liner compatible with all brake and clutch fluids

•Kits include chrome-plated fittings•Come complete in attractive clamshell packaging with instructions and installation hardware•Made in the U.S.A.

FRONT BRAKE LINE KITS

FRONT BRAKE LINE KITS

REAR BRAKE LINE KITS

Ebony

OEM-STYLE DOT BRAKE LINE KITS continued on next page.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

858

DESCRIPTION STOCK LENGTH STD SUG. RETAIL +2” SUG. RETAIL +4” SUG. RETAIL +6” SUG. RETAIL84-10 FXST/FXCW MODELS (CONT)00-07 FXSTD 42.25” HD9209-F $72.95 - - - - - -91-05 DYNA MODELS91 FXDB Sturgis 40.25” HD9209-D 72.95 - - - - - -93-05 FXDWG 48.00” HD9209-J 72.95 1741-0009 $72.95 - - 1741-0025 $72.9508-10 DYNA MODELS (TRI-PIECE)08-10 FXDF - 1741-1432 174.95 - - - - - -84-10 FLT/FLHR MODELS (TRI-PIECE)09-10 FLHT, FLHX, FLHR w/ ABS - 1741-1734 241.95 - - - - -08-10 FLTR w/ ABS - 1741-1733 241.95 - - - - - -08 FLHR/C w/ ABS - 1741-1731 241.95 - - - - - -08 FLHT/C/CU, FLHX w/ ABS - 1741-1732 241.95 - - - - - -08-10 FLHT/C/CU, FLHX, FLHR, FLTR, FLHRS w/o ABS - 1741-1427 174.95 - - - - - -84-07 All applications (except FLHR, FLTR) - 1741-0035 174.95 - - - - - -94-07 FLHR (exc. FLHRSEI) - HD9242-A 174.95 - - - - - -98-07 FLTR - HD9242-A 174.95 - - - - - -85-86 FX MODELS85 FXE, FXEF 41.75” - - - - HD9209-J $72.95 1741-0009 72.9585 FXSB 43.75” - - HD9209-J 72.95 1741-0009 72.95 - -85-86 FXWG 45.00” - - - - HD9209-M 72.95 - -84-94 FXR MODELS84-87 FXR, FXRS, FXRDG, FXRC 41.75” - - - - HD9209-J 72.95 1741-0009 72.9588-94 FXR, FXRS 42.25” HD9209-F 72.95 - - - - - -87-03 XL MODELS92-03 XL 883 Deluxe 42.25” HD9209-F 72.95 - - - - - -87-03 XL 883 Hugger 42.25” HD9209-F 72.95 - - HD9209-J 72.95 1741-0009 72.9588-03 XL 1200 42.25” HD9209-F 72.95 - - - - - -

DESCRIPTION STOCK LENGTH STD SUG. RETAIL +2” SUG. RETAIL +4” SUG. RETAIL +6” SUG. RETAIL87-10 FLST MODELS87-99 FLST - HD9217-A $109.95 - - - - - -00-06 FLST - 1741-0018 109.95 - - - - - -07-10 FLSTF - 1741-0897 101.95 - - - - - -00-10 FXST/FXCW MODELS00-05 FXST models - 1741-0018 109.95 - - - - - -07 FXST, FXSTB, FXSTC - 1741-0897 101.95 - - - - - -08-10 FXCW/FXCWC - 1741-1431 109.95 - - - - - -91-10 DYNA MODELS91-05 All applications - HD9219-A 87.95 - - - - - -08-10 All applications - 1741-1429 72.95 - - - - - -92-10 FLT/FLHT MODELS92-96 All applications - HD9231-A 99.95 - - - - - -97-07 All applications - HD9232-A 99.95 - - - - - -08-10 All applications w/o ABS - 1741-1428 109.95 - - - - - -

OEM-STYLE DOT BRAKE LINE KITS (CONT)

LENGTHSTAINLESS STEEL

SUG. RETAIL

CLEAR-COATED STAINLESS STEEL

SUG. RETAIL

6” - - 1741-0243 $24.959” D-30309 $24.95 D-80309 25.9511” D-30311 25.95 D-80311 26.9512” D-30312 25.95 D-80312 26.9514” D-30314 26.95 D-80314 27.9515” D-30315 27.95 D-80315 28.9516” D-30316 27.95 D-80316 28.9517” D-30317 27.95 D-80317 29.9518” D-30318 28.95 D-80318 29.9519” D-30319 28.95 D-80319 29.95


SUG. RETAIL


SUG. RETAIL

21” D-30321 $30.95 D-80321 $31.9523” D-30323 30.95 D-80323 32.9524” D-30324 31.95 D-80324 32.9525” D-30325 31.95 D-80325 33.9526” D-30326 32.95 D-80326 33.9528” D-30328 32.95 D-80328 34.9530” D-30330 33.95 D-80330 35.9532” D-30332 34.95 D-80332 36.9534” D-30334 35.95 D-80334 37.9538” D-30338 37.95 D-80338 39.95


SUG. RETAIL


SUG. RETAIL

40” D-30340 $37.95 D-80340 $40.9542” D-30342 38.95 D-80342 41.9543” D-30343 38.95 D-80343 42.9546” D-30346 39.95 D-80346 43.9547” D-30347 39.95 D-80347 44.9550” D-30350 40.95 D-80350 43.9552” D-30352 41.95 D-80352 46.9554” D-30354 42.95 D-80354 47.95

UNIVERSAL DOT BRAKE LINES•Available in stainless steel and clear-coated stainless steel lines•The combination of the PTFE inner and stainless steel outer braid eliminates the spongy feeling under heavy braking conditions

•Great looks combined with reliability and safety•DOT and TUV approved•Made in the U.S.A.

NOTE: Recommended to be used with Goodridge fittings.

FRONT BRAKE LINE KITS (CONT)

REAR BRAKE LINE KITS


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

859

LENGTH PLATINUM SUG. RETAILCLEAR-COATED STAINLESS STEEL SUG. RETAIL EBONY SUG. RETAIL

6” - - 1741-0242 $19.95 - -9” 1741-0212 $26.95 1741-0040 20.95 11309-E $21.9511” 1741-0213 27.95 1741-0041 21.95 11311-E 21.9512” 1741-0214 28.95 1741-0042 22.95 11312-E 23.9514” 1741-0215 29.95 1741-0043 23.95 11314-E 24.9515” 1741-0216 29.95 1741-0044 23.95 11315-E 24.9516” 1741-0217 30.95 1741-0045 24.95 11316-E 25.9517” 1741-0218 30.95 1741-0046 24.95 11317-E 25.9518” 1741-0219 31.95 1741-0047 25.95 11318-E 26.9519” 1741-0220 32.95 1741-0048 25.95 11319-E 26.9521” 1741-0221 33.95 1741-0049 26.95 11321-E 27.9523” 1741-0223 34.95 1741-0050 28.95 11323-E 28.9524” 1741-0224 34.95 1741-0051 28.95 11324-E 28.9526” 1741-0226 36.95 1741-0052 29.95 11326-E 29.9528” 1741-0227 37.95 1741-0053 30.95 11328-E 30.9530” 1741-0228 38.95 1741-0054 31.95 11330-E 31.9532” 1741-0229 39.95 1741-0055 32.95 11332-E 32.9534” 1741-0231 42.95 1741-0056 34.95 11334-E 33.9538” 1741-0232 42.95 1741-0057 36.95 11338-E 35.9540” 1741-0233 44.95 1741-0058 37.95 11340-E 36.9542” 1741-0235 44.95 1741-0059 38.95 11342-E 37.9546” 1741-0237 47.95 1741-0060 40.95 11346-E 39.9547” 1741-0238 48.95 1741-0061 41.95 11347-E 39.9550” 1741-0239 48.95 1741-0062 42.95 11350-E 41.9552” 1741-0240 50.95 1741-0063 44.95 11352-E 42.9554” 1741-0241 52.95 1741-0064 45.95 11354-E 43.9559” - - 1741-1408 43.95 - -60” - - 1741-1409 45.95 - -61” - - 1741-1410 45.95 - -62” - - 1741-1411 46.95 - -64” - - 1741-1413 46.95 - -65” - - 1741-1414 47.95 - -66” - - 1741-1415 47.95 - -71” - - 1741-1416 48.95 - -73” - - 1741-1417 50.95 - -75” - - 1741-1418 51.95 - -

UNIVERSAL BRAKE LINES•Choice of platinum, stainless steel and ebony finishes – all with extra stopping power

•Lines feature a PVC coating over the braid to protect paint and delicate surfaces

•Smooth-bore PTFE liner is compatible with all hydraulic and brake fluids

•Braided cover eliminates the spongy lever feeling associated with rubber brake lines

•Female-to-female steel fittings, not zinc•Made in the U.S.A.


LENGTH PART # SUG. RETAIL12” 83312 $27.9515” 83315 28.9516” 83316 29.9517” 83317 29.9518” 83318 30.9519” 83319 30.9521” 83321 31.9522” 83322 32.9523” 83323 32.9524” 83324 32.95

LENGTH PART # SUG. RETAIL25” 83325 $33.9526” 83326 33.9527” 83327 34.9528” 83328 34.9530” 83330 35.9532” 83332 36.9533” 83333 37.9534” 83334 37.9535” 83335 38.9536” 83336 38.95

LENGTH PART # SUG. RETAIL37” 83337 $38.9538” 83338 39.9540” 83340 40.9542” 83342 41.9544” 83344 42.9547” 83347 43.9550” 83350 45.9552” 83352 46.9554” 83354 46.95

Ebony

Stainless Steel

UNIVERSAL COLORFLEX BRAKE LINES•Top-quality clear-coated stainless steel universal brake lines available from Goodridge•Feature a clear cover extruded directly onto the hose complete with stainless steel ends

•Cover provides nonabrasive protection•The combination of the PTFE inner and stainless steel outer braid eliminates the spongy feeling under heavy braking conditions


NOTE: Not DOT approved; for off-road or show use only


Platinum


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

860

DESCRIPTION PART # SUG. RETAILSTAINLESS STEEL FITTINGS/ADAPTERSStraight 3/8”/10mm banjo fitting B592-03C $14.95Straight 7/16” banjo fitting B592-03-04C 14.9530 ° 7/16” banjo fitting B593-03-04C 14.9530° 3/8”/10mm banjo fitting B593-03C 14.9545° 3/8”/10mm banjo fitting B594-03C 14.9590° 3/8”/10mm banjo fitting B599-03C 24.9520° side bend 3/8”/10mm banjo fitting B597-03C 15.95Double 3/8” banjo bolt 993-03-31SC 10.953/8” -24 banjo bolt bolt 775-03C 8.957/16” -24 banjo bolt bolt 775-44C 11.953/8”-24 I.F. to -3 male fitting 1724-0014 12.95EBONY FITTINGS/ADAPTERSStraight 3/8”/10mm banjo fitting 592-03BK 10.95Straight 7/16” banjo fitting 592-03-04BK 10.9535° 3/8”/10mm banjo fitting 593-03BK 12.9535° 7/16” banjo fitting 593-03-04BK 12.9590° 3/8”/10mm banjo fitting 599-03BK 12.9590° 7/16” banjo fitting 599-03-04BK 12.9545° tube adapter 646-03BK 15.95“S” double bend tube adapter 666-03BK 15.95Short 90° tube adapter 690-03BK 15.95Long 90° tube -3 adapter 691-03BK 14.953/8”-24 I.F. to 3/8” fitting 10324-03BK 7.953/8”-24 single banjo bolt 775-03BK 5.957/16” -24 single banjo bolt 775-44BK 5.95CHROME FITTINGS/ADAPTERSStraight 3/8”/10mm banjo fitting 592-03CH 10.95Straight 7/16” banjo fitting 592-03-04CH 10.95Straight 12mm banjo fitting 1742-0094 20.9535° 3/8”/10mm banjo fitting 593-03CH 10.9535° 7/16” banjo fitting 593-03-04CH 10.9535° 12mm banjo fitting 1742-0095 25.9590° 3/8”/10mm banjo fitting 599-03CH 11.9590° 7/16” banjo fitting 599-03-04CH 11.95150° tube adapter 6150-03CH 14.9545° tube adapter 646-03CH 13.9560° tube adapter 660-03CH 13.95“S” double bend tube adapter 666-03CH 16.95Short 90° tube adapter 690-03CH 13.95Long 90° tube adapter 691-03CH 14.95

DESCRIPTION PART # SUG. RETAILCHROME FITTINGS/ADAPTERS (CONT)3/8”-24 I.F. to -3 fitting (pr.) 10324-03CH $12.95-3 to 1/8” NPT fitting 816-03CH 2.9590° -3 to 1/8” NPT fitting 822-03CH 8.9545° -3 to 1/8” NPT fitting 823-03CH 12.95-3 tee fitting 824-03CH 15.953/8”-24 double banjo bolt 773-03LCH 5.953/8”-24 single banjo bolt 775-03LCH 4.957/16” -24 single banjo bolt 775-44CH 4.9510mm x 1.25mm single banjo bolt 992-0332CH 6.9512mm x 1.50mm banjo bolt 1742-0096 8.9545° female banjo fitting MCHD-005 21.95TEES AND WASHERSRear junction block with brake light switch mount (1/8(“ NPT threads), 84-99 Softail, chrome MCHD-015 35.95Rear brake tee (1/8(“ NPT threads), 07-10 Softail, chrome 1742-0158 41.95Rear brake tee 00-06 Softail, chrome 1742-0315 36.95Universal rear junction block with brake light switch mount (1/8(“ NPT threads), chrome MCHD-016 35.95Rear junction block with brake light switch mount (1/8(“ NPT threads), 00-04 Softail, chrome 1742-0051 42.95Universal rear junction block with brake light switch hole (1/8(“ NPT threads), chrome (no mount bracket) MCHD-014 14.95Universal front brake tee (1/8” NPT threads), chrome 1742-0145 20.95Universal front brake tee (1/8” NPT threads), ebony 1742-0102 25.95Universal rear brake tee w/o mount (1/8” NPT threads), ebony 1742-0099 17.95Universal rear brake tee w/mount (1/8” NPT threads), ebony 1742-0100 42.95Universal rear XL brake tee w/mount (1/8” NPT threads), ebony 1742-0101 42.953/8”/10mm copper crush washers (6-pk.) 44516-6 3.957/16” copper crush washers (6-pk.) 44518-6 3.9512mm aluminum crush washers (6-pk.) 1742-0143 8.95

ADAPTERS AND FITTINGS FOR GOODRIDGE UNIVERSAL BRAKE LINESNOTE: 04-10 XL models use metric 10mm x 1.25 and 12mm x 1.50 banjo bolts, washers and fittings. All Big Twin except 08-10 Dressers and pre-04 XL models use standard 3/8” and 7/16” banjo bolts, washers and fittings. Fittings and washers listed as 3/8”/10mm can be used in either application.

690-03BK

1742-0315

691-03BK

10324-03BK

592-03CH

1742-0094

593-03CH

1742-0095

599-03CH6150-03CH

646-03CH

660-03CH

666-03CH 691-03CH

690-03CH10324-03CH

816-03CH

822-03CH

MCHD-015

1742-0100

1742-0101

1742-0099

44516-6

775-44CH

773-03LCH823-03CH 824-03CH

1742-0158

1742-0096MCHD-005

1742-0051

MCHD-014

MCHD-016

1742-0102


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

861

BANJO BOLT SEALING WASHERS•Washers feature a rubber seal that provides superior sealing around the banjo bolt

•Sold in 10-pk.

BRAKE LIGHT BANJO BOLT BOOT•Clean up the looks of your brake light bolts with this handy 90° black rubber boot

•Fits brake light banjo bolts with built-in pressure switch; switch not included

JX BANJO COVER•Streamlines hand controls with a teardrop look

•Eliminates the crude bolt and washer appearance of hydraulic lines

•CNC-machined covers are designed to mount over standard 3/8” or 7/16” banjo bolts on most OEM or custom master cylinders

•Easily attach in seconds with an Allen wrench•Available in chrome or hard black anodized finish•Sold each•Made in the U.S.A.

BANJO BOLT WITH BRAKE LIGHT SWITCH MOUNT•Allows brake light switch to be threaded directly into banjo bolt head

•Screws directly into master cylinder•Replaces standard 3/8”-24 banjo bolt•Eliminates junction block•Great for custom applications•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-272185 Banjo bolt w/ brake light switch mount $8.95

PART # DESCRIPTION SUG. RETAIL1742-0136 3/8”-24; repl. OEM #41747-82A $19.951742-0137 7/16”-24; repl. OEM #41739-84A 19.952401-0318 10mm x 1.0; repl. OEM #41750-06A 19.952401-0320 10mm x 1.25; repl. OEM #41736-04 19.952401-0321 12mm x 1.5; repl. OEM #41737-04 19.95

BANJO BOLTS•Stainless steel fasteners with a polished finish

•12-point heads•Made in the U.S.A.

POLISHED CHROME TAPERED SOCKET-HEAD BANJO BOLTS•Include washers, features a tapered head•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2401-0302 7/16”-24 $11.95DS-096647 3/8”-24 9.95 PART # DESCRIPTION SUG. RETAIL

1742-0030 3/8”-24 banjo bolt w/ 7/16” shoulder $7.95

BANJO BOLT•3/8”-24 banjo bolt has a 7/16” shoulder

•Used to attach a 7/16” banjo fitting to caliper or master cylinder that accepts a 3/8”-24 banjo bolt

•Made in the U.S.A.; sold each

BRAKE LIGHT BANJO BOLT COVER•Chrome billet aluminum•Designed to fit over most banjo bolts with built-in brake light switch

•Sold each

PART # DESCRIPTION SUG. RETAIL1742-0041 Brake light banjo bolt cover $9.95

HYDRAULIC BRAKE LIGHT SWITCH/BANJO BOLTS•Feature a chrome finish with 19” long wires and terminals

•Two washers included•Sold each

PART # DESCRIPTION SUG. RETAILDOUBLE BLEED12-0013 10mm x 1.00mm $25.9512-0012 10mm x 1.25mm 25.95SINGLE BLEED12-0020 3/8”-24 22.9512-0021 7/16”-24 22.95

BRAKE LIGHT BANJO BOLTS WITH BUILT-IN PRESSURE SWITCH•Constructed of chrome-plated steel, this brake light switch banjo bolt replaces the OEM part and allows changing of the master cylinder or using rear set conversions

•Single bleed is for motorcycles with one line coming to brake master cylinder

PART # DESCRIPTION SUG. RETAILBL775-03CH 3/8”-24 BL banjo bolt $20.95BL775-44CH 7/16”-24 BL banjo bolt 19.95

PART # DESCRIPTION SUG. RETAIL1742-0098 Brake light bolt boot $4.95

PART # DESCRIPTION SUG. RETAIL1742-0110 Chrome $26.951742-0111 Black 26.95

BANJO ADAPTER WASHER•Designed for bikes that already have 7/16” banjos

•Enables the use of a 3/8” banjo bolt through a 7/16” banjo fitting (often the black rubber hose types found on late-model OEM controls) without having to remove the existing hoses

•Sold each•Made in the U.S.A.

NOTE: JX Master cylinders are set up for the use of the more common 3/8” banjo fittings that bolt onto 3/8”-24 threads in the body.

PART # DESCRIPTION SUG.RETAIL1742-0112 Banjo adapter washer $6.95

PART # DESCRIPTION SUG. RETAILDS-097014 3/8” / 10mm washers; repl. OEM #41731-88 $10.95DS-097015 7/16” washers; repl. OEM #41733-88 10.95 BANJO BOLT WASHERS

•Banjo bolt washers fit 84-06 applications

•Sold in 10-pack•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL49005 3/8” / 10mm aluminum banjo sealing washers $3.9549006 7/16” aluminum banjo sealing washers 6.951742-0157 12mm banjo bolt washers 9.95

BANJO BOLT SEALING WASHERS•Sold as 10-pk.

PART # DESCRIPTION SUG. RETAIL1742-0042 Banjo bolt 3/8”/10mm sealing washers $3.95

12-0012

12-0020

1742-01371742-0136

DS-097014

1742-0110

1742-0111

DS-096647


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

862

PART # DESCRIPTION SUG. RETAIL2106-0008 W/ AN-3 fittings $110.952106-0009 W/ 3/8”-24 inverted flare holes 110.95

BRAKE LINE JUNCTION BOX WITH BUILT-IN PRESSURE SWITCH•CNC-machined and chrome-plated for style and quality•Pressure switch is internal; no unsightly external switch needed•Can be bolted on virtually anywhere (1/4” mounting hole) or welded on with included tab

•Measures 13/4” wide x 21/2” tall (excluding fittings)•Made in the U.S.A. with domestic materials


RETAILDS-094098 Brake tee w/ two

#3 nipples and a 3/8”-24 inverted flare center hole $14.95

DS-094100 Brake tee w/ two #3 nipples and a 1/8” NPT center hole 14.95

1742-0141 Brake tee w/ three 1/8” NPT holes 13.95

BRAKE LINE TEES•Polished chrome-plated finish•For use with #3 size hose and fittings•Tees are 1/2” thick with 5/16” mounting hole•Sold each


RETAILDS-097030 Front T-junction with two side inverted flares and

center inverted flare (repl. OEM #44310-77) $12.95DS-097031 Front T-junction with two side inverted flares and

center 1/8” NPT (repl. OEM #43308-78) 12.95DS-097032 Front T-junction with two side inverted flares and

center inverted flare (repl. OEM #44311-80) 12.95DS-097035 Front/rear T-junction with two side inverted flares

and center 1/8” NPT, rear on 85-86 FXWG; 84-87 FXST, FLST (repl. OEM #42318-51) 12.95

DS-097036 Rear T-junction with two side inverted flares, center inverted flare and bottom 1/8” NPT (repl. OEM #83566-51) 12.95

DS-097037 Rear T-junction with four inverted flares (repl. OEM #42309-70) 12.95

DS-097039 Brake line T-junction plugs (inverted flare): repl. OEM #42311-58 (10-pk.) 1.95 (ea.)

BRAKE LINE T-JUNCTIONS•Chromed front/rear brake line T-junctions fit Drag Specialties’ “make-your-own” lines

•Replace non-chrome stock junctions•T’s available individually; plugs sold in packs of ten

PART # DESCRIPTION SUG. RETAILDS-097024 Flat brake tee $34.95DS-097023 Bubble brake tee 34.95DS-097026 3/8”-24 double-banjo bolt (ea.) 12.9540509 3/8”-24 single-banjo bolt (ea.) 4.95

BRAKE LINE TEES•Available in a bubble style and a flat style•Durable chrome-plated billet aluminum•Banjo bolt (3/8”-24) design reduces the possibility of overtightening•Prevent brake lines from rubbing on the front fender; 51/8” wide•Require the use of a double-shoulder 3/8”-24 banjo bolt and a 3/8”-24 single-shoulder banjo bolt; sold separately

•Designed for dual-disc brake system•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-096610 Brake line sandwich $27.95

BRAKE LINE SANDWICH•Two-piece design with a chrome finish

•Used to mount stainless steel brake line under bottom triple tree

•.375” machined groove holds brake line in place•Can also be used as universal cable clamp•Made in the U.S.A.

DS-094098

DS-097026

40509

2106-0008

2106-0009

DS-097024

DS-097023

DS-097031

DS-097030

DS-097035

DS-097032

DS-097036

DS-097037

DS-097039


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

863

PART # DESCRIPTION SUG. RETAILDS-241070 For 85-86 FXWG, 84-06 FXST $22.95DS-241071 For 86-E87 FLST (fits 15/8” x 41/8” pedal) 29.95DS-241072 For L87-10 FLST, FLSTN, FLSTF, 83-10 FLT/

FLHT/FLHR/FLTR (fits 23/8” x 49/16” pedal) (except 04-10 FLHRS/SI) 24.95

DS-720417 Repl. rubber pad (ea.) 5.95

CHROME BRAKE PEDAL PAD•Brake pedal pad in a large, easy-to-use design with replaceable rubber pad and mounting bolt

•Sold individually

NOTE: Brake pedal not included.

PART # DESCRIPTION SUG. RETAILFOR 85-10 FLT, FLHT, FLHS, FLHR AND L87-10 FLST MODELS (EXCEPT 04-10 FLHRS/SI)1610-0050 Black $69.951610-0051 Chrome 69.95

BRAKE PEDAL PAD•Replaces the stock rubber pad•CNC machined from billet aluminum•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-241011 For 84-10 FLT/FLHT and L87-10 FLST models

(except 04-10 FLHRS/SI) $63.95

BRAKE PEDAL COVER•Chrome billet cover with rubber inserts

•Replaces the stock rubber pad•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-241073C For L87-10 FLST, 84-10 FLT, HT and HS

(except 04-10 FLHRS/SI) $88.95

ALUMINUM BRAKE PEDAL COVER•Two-piece aluminum brake pedal cover features ball-milled chrome top combined with a lower plate to enclose your stock brake pedal

•Attaches with contact cement (not included)•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1611-0002 For 03-08 FXDWG, 99-10 XL883/1200 Custom

and all 02-08 V-Rod (except VRSCD/R) $32.95

BRAKE PEDAL COVER•Chrome two-piece clamshell cover surrounds the end of the brake pedal, covering the coarse, jagged surface

•Two rubber pads for secure footing•Two socket-head screws secure it in place

PART # DESCRIPTION SUG. RETAILDS-241111 Standard ISO™-Brake pedal pad

for L84-10 FXST, FXDWG models $22.95DS-241112 Longhorn ISO™-Brake pedal pad

for L84-10 FXST, FXDWG models 32.95DS-241113 Standard ISO™-Brake pedal pad for

83-10 FLT, FLHT, FLHR, FLTR, FLST models (except 04-10 FLHRS/SI) 32.95

DS-241120 Repl. pad set for DS-241111 and DS-241112 (4-pk.) 12.95DS-241122 Repl. pad set for DS-241113 (3-pk.) 11.95

ISO™-BRAKE PEDAL PADS•Complement the ISO™-Pegs footpeg•Longhorn is 25% longer than standard version•Replacement cushions available separately

PART # DESCRIPTION SUG. RETAIL1611-0017 For 84-10 FLT, FLHT, FLHR, FLTR and L87-10 FLST

models (except 04-10 FLHRS/SI) $37.951611-0018 For 84-10 FXST, FXDWG models and Küryakyn

forward controls 37.95

WIDOW BRAKE PEDAL PADS•Feature a spider-themed design in the rubber pad that complements the Widow footpeg

•Sold each

PART # DESCRIPTION SUG. RETAIL1611-0020 For 84-10 FXST, FXDWG models and Küryakyn

forward controls $39.951611-0021 For 84-10 FLT, FLHT, FLHR, FLTR, L87-10 FLST

models (except 04-10 FLHRS/SI) 39.95

ZOMBIE BRAKE PEDAL PADS•Features a chrome finish with durable rubber pads

•Zombie skull emblem that adds sinister style and matches other zombie-themed products

•Sold each

PART # DESCRIPTION SUG. RETAIL1203-0151 Rail cover insert for 84-06 FXST,

93-05 FXDWG, 85-86 FXWG $15.95

CHROME BRAKE PEDAL COVER•Machined chrome steel with rubber inlay•Bolts to stock OEM brake pedal, includes nut•Sold each PART # DESCRIPTION SUG. RETAIL

FOR 83-10 FLT, FLHT, FLHS, FLHR AND L87-10 FLST MODELS (EXCEPT 04-10 FLHRS/SI)DS-254449 Brake pedal cover $80.95

BANANA BOARD BRAKE PEDAL COVER•Chrome billet aluminum cover features a black rubber insert with bright finish rivets

•Matches Cyclesmiths’ Banana Boards DS-254434, DS-254435, DS-254436 and Banana shifter pedal PART #1603-0047


DS-241111 DS-241112 DS-241113

1611-0021

1611-0020

DS-2410701610-0051

DS-241071

DS-241072

1611-0017

1610-0050


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

864

PART # DESCRIPTION SUG. RETAILDS-530604 For 83-10 FLT (except 04-10 FLHRS/SI),

L87-10 FLST; repl. OEM #42416-83/06 $5.95

PART # DESCRIPTION SUG. RETAILDS-241053 For 86-E87 FLST; repl. OEM #36956-65A $10.95

REPLACEMENT BRAKE PEDAL RUBBER•Rubber brake pedal replacements for OEM that can also be used on foot clutches

BRAKE/CLUTCH PEDAL PAD ASSEMBLY•Larger, easier to use pedal

PART # DESCRIPTION SUG. RETAILFOR 84-10 FXST, 08-10 FXCW, 93-08 FXDWG AND 08-10 FXD W/ FORWARD CONTROLS1610-0145 Black anodized $44.951610-0146 Raw aluminum 44.95

PART # DESCRIPTION SUG. RETAIL1610-0133 For 84-10 FLT, FLHT, FLHR, FLHX, FLTR, L87-10 FLST,

FLSTF, FLSTN (except 04-10 FLHRS) $44.951610-0134 For 84-10 FXST 39.95

PART # DESCRIPTION SUG. RETAILFOR 09 FLHT/FLHR/FLTR/FLHX1703-0063 Chrome $49.951703-0064 Black 42.95

SERRATED BRAKE PEDAL COVER•Ergonomically corrects the angle for better feel and operation; a must have when using forward control extensions

•Fully CNC-machined from billet aluminum•Available in black anodized or raw aluminum finishes•Measures 21/2” x 2”•All mounting hardware included•Made in the U.S.A.

BRAKE PEDAL COVERS•Billet aluminum construction•Polished and chrome plated•Knurled pattern rubber pad matches Drag Specialties/Hotop foot pegs PART #1620-0377 and shift peg PART #1603-0053

•Attaches to the existing OEM brake pedal•PART #1610-0133 measures 2-5/8” x 4-3/4”•PART #1610-0134 measures 2” X 3-1/8”•Includes mounting hardware

REAR BRAKE LIGHT SWITCH COVER•Steel construction•Chrome or gloss black finish available•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1610-0073 For 08-10 FLHT/FLHR/FLHX/FLTR models $219.95

PART # DESCRIPTION SUG. RETAILDS-530603 Rear brake pedal for L87-99 FLST

models; repl. OEM #42407-87B $42.95

PART # DESCRIPTION SUG. RETAIL1610-0152 For 08-10 FLHT/FLHR/FLHX/FLTR $149.951610-0151 For 97-07 FLT/FLHT/FLHR/FLTR 149.95

NESS-TECH BRAKE PEDAL•Machined from 6061 T-6 billet aluminum then chrome-plated to a high luster finish

•Radius design improves styling•Direct bolt-on replacement•Made in the U.S.A.

CHROME REAR BRAKE PEDAL•Includes zerk fitting and bushing

CONTOUR CHROME REAR BRAKE PEDALS•Machined aluminum construction with chrome finish

•Made in the U.S.A.•Matching floorbord available; see FOOTRESTS & LICENSE PLATE FRAMES section


RETAILFOR 00-10 FXST1611-0025 Chrome $329.951611-0026 Black 329.95FOR 00-10 FLST1611-0023 Chrome 329.951611-0024 Black 329.95FOR 99-10 FXDB1610-0141 Chrome 299.95


RETAILFOR 99-10 FXDB (CONT)1610-0142 Black $299.95FOR 08-10 FLHT, FLHR, FLTR1610-0074 Chrome 329.951610-0075 Black 329.95FOR 97-07 FLT, FLHT, FLHR, FLTR1610-0052 Chrome 329.951610-0053 Black 329.95

REAR BRAKE PEDAL•CNC-machined billet aluminum construction•Available in chrome or black•Matching floorboards, shift levers, dash covers and saddlebag latch covers available separately

•Includes shifter peg•Made in the U.S.A.

1610-01451610-0133

1610-0134

1703-0063 1703-0064

1610-0152

1610-0146

1611-0025

1611-0026

1610-0052

1610-0053


RETAILFOR 86-10 FLT/FLHT, L87-10 FLST1610-0147 Chrome $99.951610-0148 Black 99.95


RETAILFOR 84-10 FXST MODELS1610-0149 Chrome $99.951610-0150 Black 99.95

TRAC SERIES BRAKE PEDAL PADS•Machined from billet aluminum with stainless steel studs pressed into the base

•Top surface is satin grained and either chrome-plated or black-anodized

•Provide secure no-slip foot placement in all weather conditions•Mount directly onto stock brake arms, replacing the stock rubber pad•Made in the U.S.A. with domestic materials

1610-0148


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 14

865

BRAKE ARMS•Carved from billet aluminum and available either chrome plated or black anodized

•Choose from Deep Cut, Retro and Radius styles•Matching brake peg included except with Radius style•Perfect match for Ness heel-toe shifter kits

PART # DESCRIPTION SUG. RETAILSTEELDS-530633 For 00-10 FLST $155.95DS-530634 For 97-07 FLHT,FLHR 155.95DS-530635 For 87-99 FLST 155.95DS-530636 For 84-96 FLHT,FLHR 155.95BILLET LOOKDS-530637 For 00-10 FLST 155.95DS-530638 For 97-07 FLHT,FLHR 155.95DS-530639 For 87-99 FLST 155.95DS-530640 For 84-96 FLHT,FLHR 155.95

EXTENDED REAR BRAKE PEDALS•Re-engineered brake pedal is moved forward and out of the way on FLST/FLHT models with floorboards

•Retain the use of OEM floorboards•Give your foot full use of the floorboard and add legroom to stretch•Available in steel or billet-look steel with a triple-plated chrome finish•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 97-07 FLHT, FLHR, FLTR AND 87-10 FLST MODELS1610-0017 Standard style $84.950613-0001 Girder style 96.95FOR 08-10 FLHT/FLHR/FLTR/FLHX1610-0139 Liberator style 94.951610-0140 Girder style 94.95

EXTENDED BRAKE PEDAL•Move the brake pedal location forward and down while flattening the angle of the pad

•Eliminates your foot being “under” the brake pedal, for a more natural feel when moving your foot from the floorboard to the brake pedal

•Polished, chrome-plated finish•Bronze bushing with grease fitting for long life•For use with floorboard-equipped bikes•Compatible with engine-guard mounted cruise pegs and Küryakyn’s Cruise Arm Mark III (adjustment range of Cruise Arm Mark III may be slightly reduced)

NOTE: On 02-07 models, extended brake pedal is only slightly longer and flatter than the stock brake pedal.

PART # DESCRIPTION SUG. RETAILFOR 00-10 FLST AND 97-07 FLT1610-0162 Deep Cut, chrome $249.951610-0160 Deep Cut, black 249.951610-0165 Retro, chrome 229.951610-0161 Radius, chrome 199.95FOR 08-10 FLT1610-0163 Deep Cut, chrome 249.951610-0167 Deep Cut, black 249.951610-0166 Retro, chrome 229.951610-0164 Radius, chrome 199.95

PART # DESCRIPTION SUG. RETAILFOR 02-10 FLHT/FLHR/FLTR/FLHX AND 02-10 FLST MODELS1610-0135 Black $99.951610-0136 Chrome 99.951610-0137 Black diamond-edge 119.95

BRAKE ARM COVERS•CNC-machined from billet aluminum•Finned design•Covers the outside-facing area of the brake arm

•Installs in minutes•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-241047 For 84-10 models; repl. OEM #42460-80B $1.95

CHROME CLEVIS PIN KIT•Replaces brake clevis pin and hardware

•Kit contains chrome clevis pin, chrome washer and chrome cotter pin

•Sold to dealer as a 10-pk. (10 clevis pins, washers and cotter pins); sold to consumer as each

PART # DESCRIPTION SUG. RETAILDS-530605 For 87-99 FLST models; repl. OEM #42431-87A $119.95

CHROME REAR BRAKE LEVER MOUNTING BRACKET•Chrome finish

PART # DESCRIPTION SUG. RETAIL1703-0027 For 04-10 XL883C and XL1200C, and 04-10 XL

models w/ H-D accessory forward controls (OEM #s 33395-04 or 33398-04) $29.95

BRAKE ROD COVER•Precision-fit cover snaps right on; no tools needed

•Show-chromed finish•Hides brake rod ends and adds sparkle

1610-0163

1610-01671610-0166

DS-530634

DS-530638

1610-0017

0613-0001

DS-530637

PART # DESCRIPTION SUG. RETAIL1610-0144 For 02-10 FLHT/FLHR/FLTR/FLHX and 02-10 FLST $59.95

BRAKE PEDAL ARM COVER•Custom overlay adds a chrome and black profile to the stock brake arm

•Installs with high-strength peel-and-stick adhesive

1610-0135 1610-0136

1610-0137

Documents

14 BRAKES (Freins) 2010