Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Színes kültéri IR kamera
Használati utasítás
techson tC Pro-8650 iRVF Dn OsD 4–9típusú kamerákhoz
1/3” CCD
FelbONTás: sZíNesbeN 650 TV sOR
bEÉPíTETT 4–9 MM VaRIFOKálIS ObJEKTíVVEl
MIN. FÉNYÉRzÉKENYSÉG: 0 luX (IR bEKaPCSOlVa)
DIGITálIS DaY&NIGHT FuNKCIó
IR VIláGíTáSI TáVOlSáG: 20 M
OSD MENü
TáPFESzülTSÉG: DC 12 V
2
1. Csak megfelelő tápegységet használjon. A TC Pro-8650 IR VF DN kamerához csak stabilizált 12 V DC tápegységet használjon. Ügyeljen, hogy a megfelelő tápfeszültséget használja. Nem megfelelő tápfeszültség csatlakoztatása hibás működést, vagy a kamera károsodását okozhatja.
2. Ne próbálja meg szétszerelni a kamerát. Az áramütés elkerülése érdekében ne távolítsa el a csavarokat vagy a fedelet. A készülék nem tartalmaz a felhasználó által javítható alkatrészeket. Szervizelés céljából forduljon szakemberhez.
3. óvatosan kezelje a kamerát. Ne rongálja a kamerát. Kerülje az ütést, rázkódást, stb. A kamera megsérülhet a helytelen kezelés vagy tárolás következtében.
4. Ne használjon erős tisztítószert vagy súrolószert a kamera tisztításához. Amennyiben a kamera piszkos, használjon száraz ruhát a tisztításhoz. A nehezen eltávolítható szennyeződésekhez enyhe tisztítószert használjon, majd törölje le.
5. a kamera objektívjébe ne süssön közvetlenül bele a nap. A kamerát úgy helyezze el, hogy az objektívbe ne süssön közvetlenül bele a nap, vagy ne világítson bele nagyon erős fényforrás, függetlenül attól, hogy a kamera üzemel, vagy nem. Ez károsíthatja a CCD képérzékelőt.
6. Ne helyezze a kamerát zavarforrás közelébe. Amennyiben a kamera olyan készülék közelében van elhelyezve (pl.: vezeték nélküli kommunikációs eszköz), amely erős elektromágneses mezőt bocsájt ki, akkor a kamera képén zavarjel keletkezhet, mint pl. zaj, csíkok.
A TechSon TechSon TC Pro-8650 IRVF DN OSD 4–9 kamera új generációs képfeldolgozási technológiát és fejlett digitális zajcsökkentési technológiát használ. A felbontása jobb, mint 650 TV sor. Rendelkezik D-WDR, HS BLC, és egyéb funkciókkal. Divatos és professzionális tervezés. IP 55 kültéri kivitel. Az OSD menüvel beállítható a fényerő, kontraszt, színtelítettség, háttérfény kompenzáció, fehéregyensúly, AGC, és egyéb funkciók, amelyek biztosítják a tiszta kiértékelhető képeket. Emellett a tükrözés, mozgásérzékelés, privát zóna funkciók használatával különböző környezetben használható a nap 24 órájában.
3
óVINTÉzKEDÉSEK
Használati utasítástechson tC Pro-8650 iRVF Dn OsD 4–9 típusú kamerához
ÖSSZEHASONLÍTÁS
Hagyományos kamera Hagyományos IR kamera TC Pro-8650
4
Nagy felbontás 650 Tv sor felbontás színes üzemmódban.Hosszú élettartamúra tervezett Infravörös fényforrás A beépített nagyteljesítményű IR LED-ek fényereje és élettartama többszöröse a hagyományos LED-es
reflektoroknak.IP55 védettség Víz és pormentes kivitel.automatikus D/N átkapcsolás Nappal színes kép, ha van megfelelő megvilágítás. Éjszakai módban fekete-fehér kép. Az infravörös reflektor
automatikusan bekapcsol 4 Lux alatt. WDR A digitális WDR (széles dinamika tartomány) technológia segítségével a világos és sötét képrészletek
egyszerre megjeleníthetők a képen.OSD menü Hatékony OSD menü, amely lehetővé teszi a működési paraméterek beállítását.Mozgásérzékelés riasztás funkció Videojel alapú mozgásérzékelés, amelyet egy felvillanó kék LED jelez.Minden irányban állítható konzol Praktikus konzol, amely bármilyen irányba beállítható. Kábelrejtős kivitel, a kábelek a konzol belsejében
vannak elvezetve.3D-DNR Az alkalmazott speciális algoritmus csökkenti a videozajt és a színzajt, ezáltal javítja a képminőséget. HS-blC (erős ellenfény kompenzálás) A kamera képes automatikusan felismerni a reflektorfényt, amelyet képes kimaszkolni, így javítva
a képminőséget és a kép kiértékelhetőségét. SENSE-uP (elektronikus érzékenység növelés) Használatával a gyenge megvilágítás mellett is értékelhető képet ad a kamera.
JEllEMzőK
TelepíTés és beállíTás1. Kamera elforgatás beállítás:
Lazítsa meg a konzolon a forgatás-rögzítő csavart. Állítsa a kamerát a kívánt szögbe, majd rögzítse a csavarral.
2. Kamera vízszintes beállítás: Lazítsa meg a vízszintes beállító gyűrűt. Állítsa a kamerát a kívánt szögbe, majd rögzítse a gyűrűvel.
3. Kamera függőleges beállítás: Lazítsa meg a függőleges rögzítő csavart. Állítsa a kamerát a kívánt szögbe, majd rögzítse a csavart.
4. Objektív beállítás: Állítsa be a kívánt látószöget a ZOOM gyűrűvel, majd állítsa be a kép fókuszát a fókusz beállító gyűrűvel.
A menü-gombok a kamera hátulján találhatók.Menü: Belépés a menübeFel/le: Mozgás a menüben fel/leBal/jobb: A kurzor mozgatása vízszintesen, vagy a paraméterek változtatása.
1 2
3 4
LEFT RIGHTMENU
UP DOWN
LEFT RIGHTMENU
UP DOWN
Forgatás-rögzítő csavar
Függőleges rögzítő csavarZOOM gyűrű
Bal gomb Jobb gomb
Fókusz beállító gyűrű
Vízszintes beállító gyűrű
Fel gomb Le gomb
MENü bEállíTáSI úTMuTaTó
EXPOSURE (expozíció)1. A kurzorral válassza ki az EXPOSURE menüpontot.
A LENS (Objektív) menüpontban kiválasztható az objektív működése: MANUAL (kézi) írisz, DC írisz (auto írisz) valamint az E.SHUTTER-t (zársebesség) és a BRIGHT (fényerő) lehet beállítani.
2. A kurzorral válassza ki a HBLC/D-WDR menüpontot.Állítsa be a BLC-t (háttérfény kompenzáció): MANUAL (kézi), AUTO (automatikus), AGC (automatikus erősítés szabályozás): OFF (ki), LOW (alacsony), MIDDLE (közepes), HIGH (magas). Állítsa be a HSBLC-t (Erős ellenfény kompenzáció): AUTO (automatikus), ON (be). Amennyiben a HSBLC be van kapcsolva, beállítható a szintje (SET LEVEL), a színe (GRAY MODE), valamint a területe (MASK SEL). Állítsa be a D-WDR-t (széles dinamikatartomány), majd állítsa be a mértékét.
3. A kurzorral válassza ki az AGC (automatikus erősítés szabályozás) menüpontot.Állítsa be az értékét: OFF (ki), LOW (alacsony), MIDDLE (közepes), HIGH (magas).
4. A kurzorral válassza ki a 3-DNR (digitális zajszűrés) menüpontot.Állítsa be az értékét: OFF (ki), LOW (alacsony), MIDDLE (közepes), HIGH (magas).
5. A kurzorral válassza ki a SENSE-UP (érzékenység növelés) menüpontot.Állítsa be az értékét: OFF (ki), LOW (alacsony), MIDDLE (közepes), HIGH (magas).
MENU OPERATION INSTRUCTION
SETUP:
1. Press MENU button to display SETUP. Move the cursor to EXPOSURE. And move the
cursor to LENS by up and down buttons and set LENS by left and right buttons: manual iris
lens; DC drive iris lens. E.SHUTTER and BRIGHT can be set.
EXPOSURE:
1. Move the cursor to COLOR, and set WB MODE by left and right buttons: MANUAL; ATW;
AWB; ATW LOCK. When MANUAL is selected, you can set color temperature.
COLOR:
DAY&NIGHT:
1. Move the cursor to DAY&NIGHT, and set DAY&NIGHT by left and right buttons: AUTO;
COLOR; WHITE; EXT.
FUNCTION:
1. Move the cursor to FUNCTION. Move the cursor to MIRROR by up and down buttons, and
set MIRROR by left and right buttons: ON; OFF.Move the cursor to SHARPNESS, and set
SHARPNESS range.Move the cursor to LSC, and set it: ON; OFF.
EXP WB D&N FUNC MOT PVM SET SYS EXIT
EXPOSURE
HBLC/D-WDR
AGC
3D-DNR
SENSE-UP
EXIT
LENS
LOW
HIGH
ELCOFF
OFFSAVE
LENS-ELC
BRIGHT
E. SHUTTER
RETURN
AUTO 050
HLI
MODE
SET LEVEL
GRAY MODE
MASK SEL
HBLC
BLACK
010
NIGHT
RETURN
MASK 1
2. Move the cursor to HBLC/D-WDR and set HBLC/D-WDR by left and right buttons: BLC; set BLC
by left and right buttons: MANUAL; AUTO. Set AGC: OFF; LOW; MIDDLE; HIGH.Set HBLC by
left and right buttons: AUTO; ON. When HBLC is on, you can set SET LEVEL, GRAY
MODE and MASK SEL.Set D-WDR by left and right buttons.
D-WDR
D-WDR LEVEL 010 RETURN
COLOR
R-Y GAIN
B-Y GAIN
WB MODE
128
128
EXIT
AWC
WB-MANUAL
M. WB B
RETURN
M. WB R
064
064
DAY&NIGHT
C_SUP
EXIT
D&N MODE
060
030
A_SUP
AUTO
D&N-AUTO
DAY>NIGHT
DWELL TIME
BURST
013
019
NIGHT>DAY
OFF
RETURN
003
D&N-EXT.
DAY>NIGHT
DWELL TIME
BURST
100
210
NIGHT>DAY
OFF
RETURN
003
SMART IR AUTO
FUNCTION
SHARPNESS
MIRROR
OFF
020
LSC
OFF
EXIT SAVE
MOTION:
1. Move the cursor to MOTION, and set MOTION by left and right buttons: ON; OFF.
When MOTION is on, you can set 1~4 AREA; SENSITI.; DISPLAY ICON; ALARM.
MOTION
AREA SEL
MOTION
AREA 1
025 SENSITI.
OFF
DISPLAY
SAVE
HOLD TIME
ALARM
EXIT
ICON
ON
008
PRIVACY:
PRIVACY
MASK 2
MASK 1
MASK 3
OFF
MASK 4
SAVE
MASK 5
MASK 6
MASK 7
MASK 8
EXIT
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SETUP:1. Move the cursor to SETUP. Move the cursor to TITLE by up and down buttons, and set
TITLE by left and right buttons: ON; OFF. When TITLE is on, select different user titles.
SETUP
MANUAL DPC
TITLE
MANUAL
AUTO AUTO DPC
OFF
OLPF
SAVE
MONITOR
GAMMA
EXIT
650
0.45
CRT
USER TITLE
CLR POS RET
ABCDE FG H I J K L M N O P
QR S T U VW XYZ 0 1 2 3 4 5
6 7 8 9 ! “ # $%& ‘ ( ) * +
, . / : ; < >? @ [ ] ^ _= \_
3. Move the cursor to AUTO DPC, and set AUTO DPC by left and right buttons: ON; OFF.
AUTO DPC-AUTO
DPC RUN
DPC LEVEL
RETURN
020
MANUAL DPC-MANUAL
BLACK THR
WHITE THR
DPC LEVEL
050
RETURN
030
030
SYSTEM:
1. Move the cursor to SYSTEM. Move the cursor to CAMERA ID by up and down buttons and
set CAMERA ID by left and right buttons.Move the cursor to COMMUNI., And set
COMMUNI.: ON; OFF. When COMMUNI is on, you can select PROTOCOL and BAUDRATE.
Move the cursor to LANGUAGE, and set it: CHINESE; ENGLISH.
SYSTEM
COMMUNI.
CAMERA ID
LANGUAGE
001
EXIT
OFF
ENGLISH
SAVE
COMMUNICATION
BAUDRATE
PROTOCOL
RETURN
PELCO-D
9600
EXIT:1.Move the cursor to EXIT. Move the cursor to FACTORY SET by up and down buttons and
set it: YES; NO. Moving the cursor SAVE&EXIT is to save the changes you have made and
exit.Move the cursor to EXIT and exit the menu directly.
EXIT
SAVE&EXIT
FACTORY SET
EXIT
NO
1. Move the cursor to PRIVACY, and set MASK1~8 by left and right buttons: OFF; ON.
When MASK 1~8 is on, you can set the privacy masks and color.
2.Move the cursor to MANUAL DPC, and set MANUAL DPC by left and right buttons: ON; OFF.
3. Move the cursor to AGC, and set AGC by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4. Set 3D-DNR by left and right buttons: OFF; LOW; MIDDLE; HIGH.
5. Set SENSE UP by left and right buttons: OFF; 2 ; 4 ; 8 ; 16 ; 32 ; 64 ; 128 ; 256 ; 512 .
4.Move the cursor to OLPF, and set OLPF by left and right buttons: 650; 850.
5.Move the cursor to MONITOR, and set MONITOR by left and right buttons:CRT; LCD.
6.Move the cursor to GAMMA, and set GAMMA by left and right buttons: 0.45 0.6 1 other.
EN-X1-330-111110
SAVE
MENU OPERATION INSTRUCTION
SETUP:
1. Press MENU button to display SETUP. Move the cursor to EXPOSURE. And move the
cursor to LENS by up and down buttons and set LENS by left and right buttons: manual iris
lens; DC drive iris lens. E.SHUTTER and BRIGHT can be set.
EXPOSURE:
1. Move the cursor to COLOR, and set WB MODE by left and right buttons: MANUAL; ATW;
AWB; ATW LOCK. When MANUAL is selected, you can set color temperature.
COLOR:
DAY&NIGHT:
1. Move the cursor to DAY&NIGHT, and set DAY&NIGHT by left and right buttons: AUTO;
COLOR; WHITE; EXT.
FUNCTION:
1. Move the cursor to FUNCTION. Move the cursor to MIRROR by up and down buttons, and
set MIRROR by left and right buttons: ON; OFF.Move the cursor to SHARPNESS, and set
SHARPNESS range.Move the cursor to LSC, and set it: ON; OFF.
EXP WB D&N FUNC MOT PVM SET SYS EXIT
EXPOSURE
HBLC/D-WDR
AGC
3D-DNR
SENSE-UP
EXIT
LENS
LOW
HIGH
ELCOFF
OFFSAVE
LENS-ELC
BRIGHT
E. SHUTTER
RETURN
AUTO 050
HLI
MODE
SET LEVEL
GRAY MODE
MASK SEL
HBLC
BLACK
010
NIGHT
RETURN
MASK 1
2. Move the cursor to HBLC/D-WDR and set HBLC/D-WDR by left and right buttons: BLC; set BLC
by left and right buttons: MANUAL; AUTO. Set AGC: OFF; LOW; MIDDLE; HIGH.Set HBLC by
left and right buttons: AUTO; ON. When HBLC is on, you can set SET LEVEL, GRAY
MODE and MASK SEL.Set D-WDR by left and right buttons.
D-WDR
D-WDR LEVEL 010 RETURN
COLOR
R-Y GAIN
B-Y GAIN
WB MODE
128
128
EXIT
AWC
WB-MANUAL
M. WB B
RETURN
M. WB R
064
064
DAY&NIGHT
C_SUP
EXIT
D&N MODE
060
030
A_SUP
AUTO
D&N-AUTO
DAY>NIGHT
DWELL TIME
BURST
013
019
NIGHT>DAY
OFF
RETURN
003
D&N-EXT.
DAY>NIGHT
DWELL TIME
BURST
100
210
NIGHT>DAY
OFF
RETURN
003
SMART IR AUTO
FUNCTION
SHARPNESS
MIRROR
OFF
020
LSC
OFF
EXIT SAVE
MOTION:
1. Move the cursor to MOTION, and set MOTION by left and right buttons: ON; OFF.
When MOTION is on, you can set 1~4 AREA; SENSITI.; DISPLAY ICON; ALARM.
MOTION
AREA SEL
MOTION
AREA 1
025 SENSITI.
OFF
DISPLAY
SAVE
HOLD TIME
ALARM
EXIT
ICON
ON
008
PRIVACY:
PRIVACY
MASK 2
MASK 1
MASK 3
OFF
MASK 4
SAVE
MASK 5
MASK 6
MASK 7
MASK 8
EXIT
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SETUP:1. Move the cursor to SETUP. Move the cursor to TITLE by up and down buttons, and set
TITLE by left and right buttons: ON; OFF. When TITLE is on, select different user titles.
SETUP
MANUAL DPC
TITLE
MANUAL
AUTO AUTO DPC
OFF
OLPF
SAVE
MONITOR
GAMMA
EXIT
650
0.45
CRT
USER TITLE
CLR POS RET
ABCDE FG H I J K L M N O P
QR S T U VW XYZ 0 1 2 3 4 5
6 7 8 9 ! “ # $%& ‘ ( ) * +
, . / : ; < >? @ [ ] ^ _= \_
3. Move the cursor to AUTO DPC, and set AUTO DPC by left and right buttons: ON; OFF.
AUTO DPC-AUTO
DPC RUN
DPC LEVEL
RETURN
020
MANUAL DPC-MANUAL
BLACK THR
WHITE THR
DPC LEVEL
050
RETURN
030
030
SYSTEM:
1. Move the cursor to SYSTEM. Move the cursor to CAMERA ID by up and down buttons and
set CAMERA ID by left and right buttons.Move the cursor to COMMUNI., And set
COMMUNI.: ON; OFF. When COMMUNI is on, you can select PROTOCOL and BAUDRATE.
Move the cursor to LANGUAGE, and set it: CHINESE; ENGLISH.
SYSTEM
COMMUNI.
CAMERA ID
LANGUAGE
001
EXIT
OFF
ENGLISH
SAVE
COMMUNICATION
BAUDRATE
PROTOCOL
RETURN
PELCO-D
9600
EXIT:1.Move the cursor to EXIT. Move the cursor to FACTORY SET by up and down buttons and
set it: YES; NO. Moving the cursor SAVE&EXIT is to save the changes you have made and
exit.Move the cursor to EXIT and exit the menu directly.
EXIT
SAVE&EXIT
FACTORY SET
EXIT
NO
1. Move the cursor to PRIVACY, and set MASK1~8 by left and right buttons: OFF; ON.
When MASK 1~8 is on, you can set the privacy masks and color.
2.Move the cursor to MANUAL DPC, and set MANUAL DPC by left and right buttons: ON; OFF.
3. Move the cursor to AGC, and set AGC by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4. Set 3D-DNR by left and right buttons: OFF; LOW; MIDDLE; HIGH.
5. Set SENSE UP by left and right buttons: OFF; 2 ; 4 ; 8 ; 16 ; 32 ; 64 ; 128 ; 256 ; 512 .
4.Move the cursor to OLPF, and set OLPF by left and right buttons: 650; 850.
5.Move the cursor to MONITOR, and set MONITOR by left and right buttons:CRT; LCD.
6.Move the cursor to GAMMA, and set GAMMA by left and right buttons: 0.45 0.6 1 other.
EN-X1-330-111110
SAVE
MENU OPERATION INSTRUCTION
SETUP:
1. Press MENU button to display SETUP. Move the cursor to EXPOSURE. And move the
cursor to LENS by up and down buttons and set LENS by left and right buttons: manual iris
lens; DC drive iris lens. E.SHUTTER and BRIGHT can be set.
EXPOSURE:
1. Move the cursor to COLOR, and set WB MODE by left and right buttons: MANUAL; ATW;
AWB; ATW LOCK. When MANUAL is selected, you can set color temperature.
COLOR:
DAY&NIGHT:
1. Move the cursor to DAY&NIGHT, and set DAY&NIGHT by left and right buttons: AUTO;
COLOR; WHITE; EXT.
FUNCTION:
1. Move the cursor to FUNCTION. Move the cursor to MIRROR by up and down buttons, and
set MIRROR by left and right buttons: ON; OFF.Move the cursor to SHARPNESS, and set
SHARPNESS range.Move the cursor to LSC, and set it: ON; OFF.
EXP WB D&N FUNC MOT PVM SET SYS EXIT
EXPOSURE
HBLC/D-WDR
AGC
3D-DNR
SENSE-UP
EXIT
LENS
LOW
HIGH
ELCOFF
OFFSAVE
LENS-ELC
BRIGHT
E. SHUTTER
RETURN
AUTO 050
HLI
MODE
SET LEVEL
GRAY MODE
MASK SEL
HBLC
BLACK
010
NIGHT
RETURN
MASK 1
2. Move the cursor to HBLC/D-WDR and set HBLC/D-WDR by left and right buttons: BLC; set BLC
by left and right buttons: MANUAL; AUTO. Set AGC: OFF; LOW; MIDDLE; HIGH.Set HBLC by
left and right buttons: AUTO; ON. When HBLC is on, you can set SET LEVEL, GRAY
MODE and MASK SEL.Set D-WDR by left and right buttons.
D-WDR
D-WDR LEVEL 010 RETURN
COLOR
R-Y GAIN
B-Y GAIN
WB MODE
128
128
EXIT
AWC
WB-MANUAL
M. WB B
RETURN
M. WB R
064
064
DAY&NIGHT
C_SUP
EXIT
D&N MODE
060
030
A_SUP
AUTO
D&N-AUTO
DAY>NIGHT
DWELL TIME
BURST
013
019
NIGHT>DAY
OFF
RETURN
003
D&N-EXT.
DAY>NIGHT
DWELL TIME
BURST
100
210
NIGHT>DAY
OFF
RETURN
003
SMART IR AUTO
FUNCTION
SHARPNESS
MIRROR
OFF
020
LSC
OFF
EXIT SAVE
MOTION:
1. Move the cursor to MOTION, and set MOTION by left and right buttons: ON; OFF.
When MOTION is on, you can set 1~4 AREA; SENSITI.; DISPLAY ICON; ALARM.
MOTION
AREA SEL
MOTION
AREA 1
025 SENSITI.
OFF
DISPLAY
SAVE
HOLD TIME
ALARM
EXIT
ICON
ON
008
PRIVACY:
PRIVACY
MASK 2
MASK 1
MASK 3
OFF
MASK 4
SAVE
MASK 5
MASK 6
MASK 7
MASK 8
EXIT
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SETUP:1. Move the cursor to SETUP. Move the cursor to TITLE by up and down buttons, and set
TITLE by left and right buttons: ON; OFF. When TITLE is on, select different user titles.
SETUP
MANUAL DPC
TITLE
MANUAL
AUTO AUTO DPC
OFF
OLPF
SAVE
MONITOR
GAMMA
EXIT
650
0.45
CRT
USER TITLE
CLR POS RET
ABCDE FG H I J K L M N O P
QR S T U VW XYZ 0 1 2 3 4 5
6 7 8 9 ! “ # $%& ‘ ( ) * +
, . / : ; < >? @ [ ] ^ _= \_
3. Move the cursor to AUTO DPC, and set AUTO DPC by left and right buttons: ON; OFF.
AUTO DPC-AUTO
DPC RUN
DPC LEVEL
RETURN
020
MANUAL DPC-MANUAL
BLACK THR
WHITE THR
DPC LEVEL
050
RETURN
030
030
SYSTEM:
1. Move the cursor to SYSTEM. Move the cursor to CAMERA ID by up and down buttons and
set CAMERA ID by left and right buttons.Move the cursor to COMMUNI., And set
COMMUNI.: ON; OFF. When COMMUNI is on, you can select PROTOCOL and BAUDRATE.
Move the cursor to LANGUAGE, and set it: CHINESE; ENGLISH.
SYSTEM
COMMUNI.
CAMERA ID
LANGUAGE
001
EXIT
OFF
ENGLISH
SAVE
COMMUNICATION
BAUDRATE
PROTOCOL
RETURN
PELCO-D
9600
EXIT:1.Move the cursor to EXIT. Move the cursor to FACTORY SET by up and down buttons and
set it: YES; NO. Moving the cursor SAVE&EXIT is to save the changes you have made and
exit.Move the cursor to EXIT and exit the menu directly.
EXIT
SAVE&EXIT
FACTORY SET
EXIT
NO
1. Move the cursor to PRIVACY, and set MASK1~8 by left and right buttons: OFF; ON.
When MASK 1~8 is on, you can set the privacy masks and color.
2.Move the cursor to MANUAL DPC, and set MANUAL DPC by left and right buttons: ON; OFF.
3. Move the cursor to AGC, and set AGC by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4. Set 3D-DNR by left and right buttons: OFF; LOW; MIDDLE; HIGH.
5. Set SENSE UP by left and right buttons: OFF; 2 ; 4 ; 8 ; 16 ; 32 ; 64 ; 128 ; 256 ; 512 .
4.Move the cursor to OLPF, and set OLPF by left and right buttons: 650; 850.
5.Move the cursor to MONITOR, and set MONITOR by left and right buttons:CRT; LCD.
6.Move the cursor to GAMMA, and set GAMMA by left and right buttons: 0.45 0.6 1 other.
EN-X1-330-111110
SAVE
COLOR (szín)1. A kurzorral válassza ki a COLOR menüpontot, majd állítsa be a WB MODE-ot
(fehéregyensúly mód): MANUAL (kézi), ATW, AWB, ATW LOCK. Amennyiben a MANUAL módot választja, beállítható a színhőmérséklet is.
MENU OPERATION INSTRUCTION
SETUP:
1. Press MENU button to display SETUP. Move the cursor to EXPOSURE. And move the
cursor to LENS by up and down buttons and set LENS by left and right buttons: manual iris
lens; DC drive iris lens. E.SHUTTER and BRIGHT can be set.
EXPOSURE:
1. Move the cursor to COLOR, and set WB MODE by left and right buttons: MANUAL; ATW;
AWB; ATW LOCK. When MANUAL is selected, you can set color temperature.
COLOR:
DAY&NIGHT:
1. Move the cursor to DAY&NIGHT, and set DAY&NIGHT by left and right buttons: AUTO;
COLOR; WHITE; EXT.
FUNCTION:
1. Move the cursor to FUNCTION. Move the cursor to MIRROR by up and down buttons, and
set MIRROR by left and right buttons: ON; OFF.Move the cursor to SHARPNESS, and set
SHARPNESS range.Move the cursor to LSC, and set it: ON; OFF.
EXP WB D&N FUNC MOT PVM SET SYS EXIT
EXPOSURE
HBLC/D-WDR
AGC
3D-DNR
SENSE-UP
EXIT
LENS
LOW
HIGH
ELCOFF
OFFSAVE
LENS-ELC
BRIGHT
E. SHUTTER
RETURN
AUTO 050
HLI
MODE
SET LEVEL
GRAY MODE
MASK SEL
HBLC
BLACK
010
NIGHT
RETURN
MASK 1
2. Move the cursor to HBLC/D-WDR and set HBLC/D-WDR by left and right buttons: BLC; set BLC
by left and right buttons: MANUAL; AUTO. Set AGC: OFF; LOW; MIDDLE; HIGH.Set HBLC by
left and right buttons: AUTO; ON. When HBLC is on, you can set SET LEVEL, GRAY
MODE and MASK SEL.Set D-WDR by left and right buttons.
D-WDR
D-WDR LEVEL 010 RETURN
COLOR
R-Y GAIN
B-Y GAIN
WB MODE
128
128
EXIT
AWC
WB-MANUAL
M. WB B
RETURN
M. WB R
064
064
DAY&NIGHT
C_SUP
EXIT
D&N MODE
060
030
A_SUP
AUTO
D&N-AUTO
DAY>NIGHT
DWELL TIME
BURST
013
019
NIGHT>DAY
OFF
RETURN
003
D&N-EXT.
DAY>NIGHT
DWELL TIME
BURST
100
210
NIGHT>DAY
OFF
RETURN
003
SMART IR AUTO
FUNCTION
SHARPNESS
MIRROR
OFF
020
LSC
OFF
EXIT SAVE
MOTION:
1. Move the cursor to MOTION, and set MOTION by left and right buttons: ON; OFF.
When MOTION is on, you can set 1~4 AREA; SENSITI.; DISPLAY ICON; ALARM.
MOTION
AREA SEL
MOTION
AREA 1
025 SENSITI.
OFF
DISPLAY
SAVE
HOLD TIME
ALARM
EXIT
ICON
ON
008
PRIVACY:
PRIVACY
MASK 2
MASK 1
MASK 3
OFF
MASK 4
SAVE
MASK 5
MASK 6
MASK 7
MASK 8
EXIT
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SETUP:1. Move the cursor to SETUP. Move the cursor to TITLE by up and down buttons, and set
TITLE by left and right buttons: ON; OFF. When TITLE is on, select different user titles.
SETUP
MANUAL DPC
TITLE
MANUAL
AUTO AUTO DPC
OFF
OLPF
SAVE
MONITOR
GAMMA
EXIT
650
0.45
CRT
USER TITLE
CLR POS RET
ABCDE FG H I J K L M N O P
QR S T U VW XYZ 0 1 2 3 4 5
6 7 8 9 ! “ # $%& ‘ ( ) * +
, . / : ; < >? @ [ ] ^ _= \_
3. Move the cursor to AUTO DPC, and set AUTO DPC by left and right buttons: ON; OFF.
AUTO DPC-AUTO
DPC RUN
DPC LEVEL
RETURN
020
MANUAL DPC-MANUAL
BLACK THR
WHITE THR
DPC LEVEL
050
RETURN
030
030
SYSTEM:
1. Move the cursor to SYSTEM. Move the cursor to CAMERA ID by up and down buttons and
set CAMERA ID by left and right buttons.Move the cursor to COMMUNI., And set
COMMUNI.: ON; OFF. When COMMUNI is on, you can select PROTOCOL and BAUDRATE.
Move the cursor to LANGUAGE, and set it: CHINESE; ENGLISH.
SYSTEM
COMMUNI.
CAMERA ID
LANGUAGE
001
EXIT
OFF
ENGLISH
SAVE
COMMUNICATION
BAUDRATE
PROTOCOL
RETURN
PELCO-D
9600
EXIT:1.Move the cursor to EXIT. Move the cursor to FACTORY SET by up and down buttons and
set it: YES; NO. Moving the cursor SAVE&EXIT is to save the changes you have made and
exit.Move the cursor to EXIT and exit the menu directly.
EXIT
SAVE&EXIT
FACTORY SET
EXIT
NO
1. Move the cursor to PRIVACY, and set MASK1~8 by left and right buttons: OFF; ON.
When MASK 1~8 is on, you can set the privacy masks and color.
2.Move the cursor to MANUAL DPC, and set MANUAL DPC by left and right buttons: ON; OFF.
3. Move the cursor to AGC, and set AGC by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4. Set 3D-DNR by left and right buttons: OFF; LOW; MIDDLE; HIGH.
5. Set SENSE UP by left and right buttons: OFF; 2 ; 4 ; 8 ; 16 ; 32 ; 64 ; 128 ; 256 ; 512 .
4.Move the cursor to OLPF, and set OLPF by left and right buttons: 650; 850.
5.Move the cursor to MONITOR, and set MONITOR by left and right buttons:CRT; LCD.
6.Move the cursor to GAMMA, and set GAMMA by left and right buttons: 0.45 0.6 1 other.
EN-X1-330-111110
SAVE
DAY/NIGHT (Nappal/Éjszaka)1. A kurzorral válassza ki a DAY/NIGHT menüpontot, majd állítsa be az üzemmódot: AUTO
(Automatikus), COLOR (Színes), B/W (Fekete-fehér), EXT (külső)
MENU OPERATION INSTRUCTION
SETUP:
1. Press MENU button to display SETUP. Move the cursor to EXPOSURE. And move the
cursor to LENS by up and down buttons and set LENS by left and right buttons: manual iris
lens; DC drive iris lens. E.SHUTTER and BRIGHT can be set.
EXPOSURE:
1. Move the cursor to COLOR, and set WB MODE by left and right buttons: MANUAL; ATW;
AWB; ATW LOCK. When MANUAL is selected, you can set color temperature.
COLOR:
DAY&NIGHT:
1. Move the cursor to DAY&NIGHT, and set DAY&NIGHT by left and right buttons: AUTO;
COLOR; WHITE; EXT.
FUNCTION:
1. Move the cursor to FUNCTION. Move the cursor to MIRROR by up and down buttons, and
set MIRROR by left and right buttons: ON; OFF.Move the cursor to SHARPNESS, and set
SHARPNESS range.Move the cursor to LSC, and set it: ON; OFF.
EXP WB D&N FUNC MOT PVM SET SYS EXIT
EXPOSURE
HBLC/D-WDR
AGC
3D-DNR
SENSE-UP
EXIT
LENS
LOW
HIGH
ELCOFF
OFFSAVE
LENS-ELC
BRIGHT
E. SHUTTER
RETURN
AUTO 050
HLI
MODE
SET LEVEL
GRAY MODE
MASK SEL
HBLC
BLACK
010
NIGHT
RETURN
MASK 1
2. Move the cursor to HBLC/D-WDR and set HBLC/D-WDR by left and right buttons: BLC; set BLC
by left and right buttons: MANUAL; AUTO. Set AGC: OFF; LOW; MIDDLE; HIGH.Set HBLC by
left and right buttons: AUTO; ON. When HBLC is on, you can set SET LEVEL, GRAY
MODE and MASK SEL.Set D-WDR by left and right buttons.
D-WDR
D-WDR LEVEL 010 RETURN
COLOR
R-Y GAIN
B-Y GAIN
WB MODE
128
128
EXIT
AWC
WB-MANUAL
M. WB B
RETURN
M. WB R
064
064
DAY&NIGHT
C_SUP
EXIT
D&N MODE
060
030
A_SUP
AUTO
D&N-AUTO
DAY>NIGHT
DWELL TIME
BURST
013
019
NIGHT>DAY
OFF
RETURN
003
D&N-EXT.
DAY>NIGHT
DWELL TIME
BURST
100
210
NIGHT>DAY
OFF
RETURN
003
SMART IR AUTO
FUNCTION
SHARPNESS
MIRROR
OFF
020
LSC
OFF
EXIT SAVE
MOTION:
1. Move the cursor to MOTION, and set MOTION by left and right buttons: ON; OFF.
When MOTION is on, you can set 1~4 AREA; SENSITI.; DISPLAY ICON; ALARM.
MOTION
AREA SEL
MOTION
AREA 1
025 SENSITI.
OFF
DISPLAY
SAVE
HOLD TIME
ALARM
EXIT
ICON
ON
008
PRIVACY:
PRIVACY
MASK 2
MASK 1
MASK 3
OFF
MASK 4
SAVE
MASK 5
MASK 6
MASK 7
MASK 8
EXIT
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SETUP:1. Move the cursor to SETUP. Move the cursor to TITLE by up and down buttons, and set
TITLE by left and right buttons: ON; OFF. When TITLE is on, select different user titles.
SETUP
MANUAL DPC
TITLE
MANUAL
AUTO AUTO DPC
OFF
OLPF
SAVE
MONITOR
GAMMA
EXIT
650
0.45
CRT
USER TITLE
CLR POS RET
ABCDE FG H I J K L M N O P
QR S T U VW XYZ 0 1 2 3 4 5
6 7 8 9 ! “ # $%& ‘ ( ) * +
, . / : ; < >? @ [ ] ^ _= \_
3. Move the cursor to AUTO DPC, and set AUTO DPC by left and right buttons: ON; OFF.
AUTO DPC-AUTO
DPC RUN
DPC LEVEL
RETURN
020
MANUAL DPC-MANUAL
BLACK THR
WHITE THR
DPC LEVEL
050
RETURN
030
030
SYSTEM:
1. Move the cursor to SYSTEM. Move the cursor to CAMERA ID by up and down buttons and
set CAMERA ID by left and right buttons.Move the cursor to COMMUNI., And set
COMMUNI.: ON; OFF. When COMMUNI is on, you can select PROTOCOL and BAUDRATE.
Move the cursor to LANGUAGE, and set it: CHINESE; ENGLISH.
SYSTEM
COMMUNI.
CAMERA ID
LANGUAGE
001
EXIT
OFF
ENGLISH
SAVE
COMMUNICATION
BAUDRATE
PROTOCOL
RETURN
PELCO-D
9600
EXIT:1.Move the cursor to EXIT. Move the cursor to FACTORY SET by up and down buttons and
set it: YES; NO. Moving the cursor SAVE&EXIT is to save the changes you have made and
exit.Move the cursor to EXIT and exit the menu directly.
EXIT
SAVE&EXIT
FACTORY SET
EXIT
NO
1. Move the cursor to PRIVACY, and set MASK1~8 by left and right buttons: OFF; ON.
When MASK 1~8 is on, you can set the privacy masks and color.
2.Move the cursor to MANUAL DPC, and set MANUAL DPC by left and right buttons: ON; OFF.
3. Move the cursor to AGC, and set AGC by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4. Set 3D-DNR by left and right buttons: OFF; LOW; MIDDLE; HIGH.
5. Set SENSE UP by left and right buttons: OFF; 2 ; 4 ; 8 ; 16 ; 32 ; 64 ; 128 ; 256 ; 512 .
4.Move the cursor to OLPF, and set OLPF by left and right buttons: 650; 850.
5.Move the cursor to MONITOR, and set MONITOR by left and right buttons:CRT; LCD.
6.Move the cursor to GAMMA, and set GAMMA by left and right buttons: 0.45 0.6 1 other.
EN-X1-330-111110
SAVE
FUNCTION (Funkció)1. A kurzorral válassza ki a FUNCTION menüpontot.
A MIRROR (tükrözés) menüpontban a kép tükrözése kapcsolható be (ON) és ki (OFF). A SHARPNESS (élesség) menüpontban a kép élessége állítható be.
5
MENU OPERATION INSTRUCTION
SETUP:
1. Press MENU button to display SETUP. Move the cursor to EXPOSURE. And move the
cursor to LENS by up and down buttons and set LENS by left and right buttons: manual iris
lens; DC drive iris lens. E.SHUTTER and BRIGHT can be set.
EXPOSURE:
1. Move the cursor to COLOR, and set WB MODE by left and right buttons: MANUAL; ATW;
AWB; ATW LOCK. When MANUAL is selected, you can set color temperature.
COLOR:
DAY&NIGHT:
1. Move the cursor to DAY&NIGHT, and set DAY&NIGHT by left and right buttons: AUTO;
COLOR; WHITE; EXT.
FUNCTION:
1. Move the cursor to FUNCTION. Move the cursor to MIRROR by up and down buttons, and
set MIRROR by left and right buttons: ON; OFF.Move the cursor to SHARPNESS, and set
SHARPNESS range.Move the cursor to LSC, and set it: ON; OFF.
EXP WB D&N FUNC MOT PVM SET SYS EXIT
EXPOSURE
HBLC/D-WDR
AGC
3D-DNR
SENSE-UP
EXIT
LENS
LOW
HIGH
ELCOFF
OFFSAVE
LENS-ELC
BRIGHT
E. SHUTTER
RETURN
AUTO 050
HLI
MODE
SET LEVEL
GRAY MODE
MASK SEL
HBLC
BLACK
010
NIGHT
RETURN
MASK 1
2. Move the cursor to HBLC/D-WDR and set HBLC/D-WDR by left and right buttons: BLC; set BLC
by left and right buttons: MANUAL; AUTO. Set AGC: OFF; LOW; MIDDLE; HIGH.Set HBLC by
left and right buttons: AUTO; ON. When HBLC is on, you can set SET LEVEL, GRAY
MODE and MASK SEL.Set D-WDR by left and right buttons.
D-WDR
D-WDR LEVEL 010 RETURN
COLOR
R-Y GAIN
B-Y GAIN
WB MODE
128
128
EXIT
AWC
WB-MANUAL
M. WB B
RETURN
M. WB R
064
064
DAY&NIGHT
C_SUP
EXIT
D&N MODE
060
030
A_SUP
AUTO
D&N-AUTO
DAY>NIGHT
DWELL TIME
BURST
013
019
NIGHT>DAY
OFF
RETURN
003
D&N-EXT.
DAY>NIGHT
DWELL TIME
BURST
100
210
NIGHT>DAY
OFF
RETURN
003
SMART IR AUTO
FUNCTION
SHARPNESS
MIRROR
OFF
020
LSC
OFF
EXIT SAVE
MOTION:
1. Move the cursor to MOTION, and set MOTION by left and right buttons: ON; OFF.
When MOTION is on, you can set 1~4 AREA; SENSITI.; DISPLAY ICON; ALARM.
MOTION
AREA SEL
MOTION
AREA 1
025 SENSITI.
OFF
DISPLAY
SAVE
HOLD TIME
ALARM
EXIT
ICON
ON
008
PRIVACY:
PRIVACY
MASK 2
MASK 1
MASK 3
OFF
MASK 4
SAVE
MASK 5
MASK 6
MASK 7
MASK 8
EXIT
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SETUP:1. Move the cursor to SETUP. Move the cursor to TITLE by up and down buttons, and set
TITLE by left and right buttons: ON; OFF. When TITLE is on, select different user titles.
SETUP
MANUAL DPC
TITLE
MANUAL
AUTO AUTO DPC
OFF
OLPF
SAVE
MONITOR
GAMMA
EXIT
650
0.45
CRT
USER TITLE
CLR POS RET
ABCDE FG H I J K L M N O P
QR S T U VW XYZ 0 1 2 3 4 5
6 7 8 9 ! “ # $%& ‘ ( ) * +
, . / : ; < >? @ [ ] ^ _= \_
3. Move the cursor to AUTO DPC, and set AUTO DPC by left and right buttons: ON; OFF.
AUTO DPC-AUTO
DPC RUN
DPC LEVEL
RETURN
020
MANUAL DPC-MANUAL
BLACK THR
WHITE THR
DPC LEVEL
050
RETURN
030
030
SYSTEM:
1. Move the cursor to SYSTEM. Move the cursor to CAMERA ID by up and down buttons and
set CAMERA ID by left and right buttons.Move the cursor to COMMUNI., And set
COMMUNI.: ON; OFF. When COMMUNI is on, you can select PROTOCOL and BAUDRATE.
Move the cursor to LANGUAGE, and set it: CHINESE; ENGLISH.
SYSTEM
COMMUNI.
CAMERA ID
LANGUAGE
001
EXIT
OFF
ENGLISH
SAVE
COMMUNICATION
BAUDRATE
PROTOCOL
RETURN
PELCO-D
9600
EXIT:1.Move the cursor to EXIT. Move the cursor to FACTORY SET by up and down buttons and
set it: YES; NO. Moving the cursor SAVE&EXIT is to save the changes you have made and
exit.Move the cursor to EXIT and exit the menu directly.
EXIT
SAVE&EXIT
FACTORY SET
EXIT
NO
1. Move the cursor to PRIVACY, and set MASK1~8 by left and right buttons: OFF; ON.
When MASK 1~8 is on, you can set the privacy masks and color.
2.Move the cursor to MANUAL DPC, and set MANUAL DPC by left and right buttons: ON; OFF.
3. Move the cursor to AGC, and set AGC by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4. Set 3D-DNR by left and right buttons: OFF; LOW; MIDDLE; HIGH.
5. Set SENSE UP by left and right buttons: OFF; 2 ; 4 ; 8 ; 16 ; 32 ; 64 ; 128 ; 256 ; 512 .
4.Move the cursor to OLPF, and set OLPF by left and right buttons: 650; 850.
5.Move the cursor to MONITOR, and set MONITOR by left and right buttons:CRT; LCD.
6.Move the cursor to GAMMA, and set GAMMA by left and right buttons: 0.45 0.6 1 other.
EN-X1-330-111110
SAVE
MENü bEállíTáSI úTMuTaTó
MENU OPERATION INSTRUCTION
SETUP:
1. Press MENU button to display SETUP. Move the cursor to EXPOSURE. And move the
cursor to LENS by up and down buttons and set LENS by left and right buttons: manual iris
lens; DC drive iris lens. E.SHUTTER and BRIGHT can be set.
EXPOSURE:
1. Move the cursor to COLOR, and set WB MODE by left and right buttons: MANUAL; ATW;
AWB; ATW LOCK. When MANUAL is selected, you can set color temperature.
COLOR:
DAY&NIGHT:
1. Move the cursor to DAY&NIGHT, and set DAY&NIGHT by left and right buttons: AUTO;
COLOR; WHITE; EXT.
FUNCTION:
1. Move the cursor to FUNCTION. Move the cursor to MIRROR by up and down buttons, and
set MIRROR by left and right buttons: ON; OFF.Move the cursor to SHARPNESS, and set
SHARPNESS range.Move the cursor to LSC, and set it: ON; OFF.
EXP WB D&N FUNC MOT PVM SET SYS EXIT
EXPOSURE
HBLC/D-WDR
AGC
3D-DNR
SENSE-UP
EXIT
LENS
LOW
HIGH
ELCOFF
OFFSAVE
LENS-ELC
BRIGHT
E. SHUTTER
RETURN
AUTO 050
HLI
MODE
SET LEVEL
GRAY MODE
MASK SEL
HBLC
BLACK
010
NIGHT
RETURN
MASK 1
2. Move the cursor to HBLC/D-WDR and set HBLC/D-WDR by left and right buttons: BLC; set BLC
by left and right buttons: MANUAL; AUTO. Set AGC: OFF; LOW; MIDDLE; HIGH.Set HBLC by
left and right buttons: AUTO; ON. When HBLC is on, you can set SET LEVEL, GRAY
MODE and MASK SEL.Set D-WDR by left and right buttons.
D-WDR
D-WDR LEVEL 010 RETURN
COLOR
R-Y GAIN
B-Y GAIN
WB MODE
128
128
EXIT
AWC
WB-MANUAL
M. WB B
RETURN
M. WB R
064
064
DAY&NIGHT
C_SUP
EXIT
D&N MODE
060
030
A_SUP
AUTO
D&N-AUTO
DAY>NIGHT
DWELL TIME
BURST
013
019
NIGHT>DAY
OFF
RETURN
003
D&N-EXT.
DAY>NIGHT
DWELL TIME
BURST
100
210
NIGHT>DAY
OFF
RETURN
003
SMART IR AUTO
FUNCTION
SHARPNESS
MIRROR
OFF
020
LSC
OFF
EXIT SAVE
MOTION:
1. Move the cursor to MOTION, and set MOTION by left and right buttons: ON; OFF.
When MOTION is on, you can set 1~4 AREA; SENSITI.; DISPLAY ICON; ALARM.
MOTION
AREA SEL
MOTION
AREA 1
025 SENSITI.
OFF
DISPLAY
SAVE
HOLD TIME
ALARM
EXIT
ICON
ON
008
PRIVACY:
PRIVACY
MASK 2
MASK 1
MASK 3
OFF
MASK 4
SAVE
MASK 5
MASK 6
MASK 7
MASK 8
EXIT
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SETUP:1. Move the cursor to SETUP. Move the cursor to TITLE by up and down buttons, and set
TITLE by left and right buttons: ON; OFF. When TITLE is on, select different user titles.
SETUP
MANUAL DPC
TITLE
MANUAL
AUTO AUTO DPC
OFF
OLPF
SAVE
MONITOR
GAMMA
EXIT
650
0.45
CRT
USER TITLE
CLR POS RET
ABCDE FG H I J K L M N O P
QR S T U VW XYZ 0 1 2 3 4 5
6 7 8 9 ! “ # $%& ‘ ( ) * +
, . / : ; < >? @ [ ] ^ _= \_
3. Move the cursor to AUTO DPC, and set AUTO DPC by left and right buttons: ON; OFF.
AUTO DPC-AUTO
DPC RUN
DPC LEVEL
RETURN
020
MANUAL DPC-MANUAL
BLACK THR
WHITE THR
DPC LEVEL
050
RETURN
030
030
SYSTEM:
1. Move the cursor to SYSTEM. Move the cursor to CAMERA ID by up and down buttons and
set CAMERA ID by left and right buttons.Move the cursor to COMMUNI., And set
COMMUNI.: ON; OFF. When COMMUNI is on, you can select PROTOCOL and BAUDRATE.
Move the cursor to LANGUAGE, and set it: CHINESE; ENGLISH.
SYSTEM
COMMUNI.
CAMERA ID
LANGUAGE
001
EXIT
OFF
ENGLISH
SAVE
COMMUNICATION
BAUDRATE
PROTOCOL
RETURN
PELCO-D
9600
EXIT:1.Move the cursor to EXIT. Move the cursor to FACTORY SET by up and down buttons and
set it: YES; NO. Moving the cursor SAVE&EXIT is to save the changes you have made and
exit.Move the cursor to EXIT and exit the menu directly.
EXIT
SAVE&EXIT
FACTORY SET
EXIT
NO
1. Move the cursor to PRIVACY, and set MASK1~8 by left and right buttons: OFF; ON.
When MASK 1~8 is on, you can set the privacy masks and color.
2.Move the cursor to MANUAL DPC, and set MANUAL DPC by left and right buttons: ON; OFF.
3. Move the cursor to AGC, and set AGC by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4. Set 3D-DNR by left and right buttons: OFF; LOW; MIDDLE; HIGH.
5. Set SENSE UP by left and right buttons: OFF; 2 ; 4 ; 8 ; 16 ; 32 ; 64 ; 128 ; 256 ; 512 .
4.Move the cursor to OLPF, and set OLPF by left and right buttons: 650; 850.
5.Move the cursor to MONITOR, and set MONITOR by left and right buttons:CRT; LCD.
6.Move the cursor to GAMMA, and set GAMMA by left and right buttons: 0.45 0.6 1 other.
EN-X1-330-111110
SAVE
MOTION (mozgás)1. A kurzorral válassza ki a MOTION menüpontot. A mozgásérzékelés be (ON) és ki (OFF)
kapcsolható. Bekapcsolt állapotban a következő funkciók állíthatók: 1~4 AREA (Terület); SENSITI. (Érzékenység); DISPLAY ICON (Megjelenítés); ALARM (Riasztás).
MENU OPERATION INSTRUCTION
SETUP:
1. Press MENU button to display SETUP. Move the cursor to EXPOSURE. And move the
cursor to LENS by up and down buttons and set LENS by left and right buttons: manual iris
lens; DC drive iris lens. E.SHUTTER and BRIGHT can be set.
EXPOSURE:
1. Move the cursor to COLOR, and set WB MODE by left and right buttons: MANUAL; ATW;
AWB; ATW LOCK. When MANUAL is selected, you can set color temperature.
COLOR:
DAY&NIGHT:
1. Move the cursor to DAY&NIGHT, and set DAY&NIGHT by left and right buttons: AUTO;
COLOR; WHITE; EXT.
FUNCTION:
1. Move the cursor to FUNCTION. Move the cursor to MIRROR by up and down buttons, and
set MIRROR by left and right buttons: ON; OFF.Move the cursor to SHARPNESS, and set
SHARPNESS range.Move the cursor to LSC, and set it: ON; OFF.
EXP WB D&N FUNC MOT PVM SET SYS EXIT
EXPOSURE
HBLC/D-WDR
AGC
3D-DNR
SENSE-UP
EXIT
LENS
LOW
HIGH
ELCOFF
OFFSAVE
LENS-ELC
BRIGHT
E. SHUTTER
RETURN
AUTO 050
HLI
MODE
SET LEVEL
GRAY MODE
MASK SEL
HBLC
BLACK
010
NIGHT
RETURN
MASK 1
2. Move the cursor to HBLC/D-WDR and set HBLC/D-WDR by left and right buttons: BLC; set BLC
by left and right buttons: MANUAL; AUTO. Set AGC: OFF; LOW; MIDDLE; HIGH.Set HBLC by
left and right buttons: AUTO; ON. When HBLC is on, you can set SET LEVEL, GRAY
MODE and MASK SEL.Set D-WDR by left and right buttons.
D-WDR
D-WDR LEVEL 010 RETURN
COLOR
R-Y GAIN
B-Y GAIN
WB MODE
128
128
EXIT
AWC
WB-MANUAL
M. WB B
RETURN
M. WB R
064
064
DAY&NIGHT
C_SUP
EXIT
D&N MODE
060
030
A_SUP
AUTO
D&N-AUTO
DAY>NIGHT
DWELL TIME
BURST
013
019
NIGHT>DAY
OFF
RETURN
003
D&N-EXT.
DAY>NIGHT
DWELL TIME
BURST
100
210
NIGHT>DAY
OFF
RETURN
003
SMART IR AUTO
FUNCTION
SHARPNESS
MIRROR
OFF
020
LSC
OFF
EXIT SAVE
MOTION:
1. Move the cursor to MOTION, and set MOTION by left and right buttons: ON; OFF.
When MOTION is on, you can set 1~4 AREA; SENSITI.; DISPLAY ICON; ALARM.
MOTION
AREA SEL
MOTION
AREA 1
025 SENSITI.
OFF
DISPLAY
SAVE
HOLD TIME
ALARM
EXIT
ICON
ON
008
PRIVACY:
PRIVACY
MASK 2
MASK 1
MASK 3
OFF
MASK 4
SAVE
MASK 5
MASK 6
MASK 7
MASK 8
EXIT
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SETUP:1. Move the cursor to SETUP. Move the cursor to TITLE by up and down buttons, and set
TITLE by left and right buttons: ON; OFF. When TITLE is on, select different user titles.
SETUP
MANUAL DPC
TITLE
MANUAL
AUTO AUTO DPC
OFF
OLPF
SAVE
MONITOR
GAMMA
EXIT
650
0.45
CRT
USER TITLE
CLR POS RET
ABCDE FG H I J K L M N O P
QR S T U VW XYZ 0 1 2 3 4 5
6 7 8 9 ! “ # $%& ‘ ( ) * +
, . / : ; < >? @ [ ] ^ _= \_
3. Move the cursor to AUTO DPC, and set AUTO DPC by left and right buttons: ON; OFF.
AUTO DPC-AUTO
DPC RUN
DPC LEVEL
RETURN
020
MANUAL DPC-MANUAL
BLACK THR
WHITE THR
DPC LEVEL
050
RETURN
030
030
SYSTEM:
1. Move the cursor to SYSTEM. Move the cursor to CAMERA ID by up and down buttons and
set CAMERA ID by left and right buttons.Move the cursor to COMMUNI., And set
COMMUNI.: ON; OFF. When COMMUNI is on, you can select PROTOCOL and BAUDRATE.
Move the cursor to LANGUAGE, and set it: CHINESE; ENGLISH.
SYSTEM
COMMUNI.
CAMERA ID
LANGUAGE
001
EXIT
OFF
ENGLISH
SAVE
COMMUNICATION
BAUDRATE
PROTOCOL
RETURN
PELCO-D
9600
EXIT:1.Move the cursor to EXIT. Move the cursor to FACTORY SET by up and down buttons and
set it: YES; NO. Moving the cursor SAVE&EXIT is to save the changes you have made and
exit.Move the cursor to EXIT and exit the menu directly.
EXIT
SAVE&EXIT
FACTORY SET
EXIT
NO
1. Move the cursor to PRIVACY, and set MASK1~8 by left and right buttons: OFF; ON.
When MASK 1~8 is on, you can set the privacy masks and color.
2.Move the cursor to MANUAL DPC, and set MANUAL DPC by left and right buttons: ON; OFF.
3. Move the cursor to AGC, and set AGC by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4. Set 3D-DNR by left and right buttons: OFF; LOW; MIDDLE; HIGH.
5. Set SENSE UP by left and right buttons: OFF; 2 ; 4 ; 8 ; 16 ; 32 ; 64 ; 128 ; 256 ; 512 .
4.Move the cursor to OLPF, and set OLPF by left and right buttons: 650; 850.
5.Move the cursor to MONITOR, and set MONITOR by left and right buttons:CRT; LCD.
6.Move the cursor to GAMMA, and set GAMMA by left and right buttons: 0.45 0.6 1 other.
EN-X1-330-111110
SAVE
PRIVACY (privát zóna)1. A kurzorral válassza ki a PRIVACY menüpontot.
Kapcsolja be (ON) vagy ki (OFF) a kiválasztott zónát (MASK1~8). Beállítható a bekapcsolt zóna helyzete és színe.
MENU OPERATION INSTRUCTION
SETUP:
1. Press MENU button to display SETUP. Move the cursor to EXPOSURE. And move the
cursor to LENS by up and down buttons and set LENS by left and right buttons: manual iris
lens; DC drive iris lens. E.SHUTTER and BRIGHT can be set.
EXPOSURE:
1. Move the cursor to COLOR, and set WB MODE by left and right buttons: MANUAL; ATW;
AWB; ATW LOCK. When MANUAL is selected, you can set color temperature.
COLOR:
DAY&NIGHT:
1. Move the cursor to DAY&NIGHT, and set DAY&NIGHT by left and right buttons: AUTO;
COLOR; WHITE; EXT.
FUNCTION:
1. Move the cursor to FUNCTION. Move the cursor to MIRROR by up and down buttons, and
set MIRROR by left and right buttons: ON; OFF.Move the cursor to SHARPNESS, and set
SHARPNESS range.Move the cursor to LSC, and set it: ON; OFF.
EXP WB D&N FUNC MOT PVM SET SYS EXIT
EXPOSURE
HBLC/D-WDR
AGC
3D-DNR
SENSE-UP
EXIT
LENS
LOW
HIGH
ELCOFF
OFFSAVE
LENS-ELC
BRIGHT
E. SHUTTER
RETURN
AUTO 050
HLI
MODE
SET LEVEL
GRAY MODE
MASK SEL
HBLC
BLACK
010
NIGHT
RETURN
MASK 1
2. Move the cursor to HBLC/D-WDR and set HBLC/D-WDR by left and right buttons: BLC; set BLC
by left and right buttons: MANUAL; AUTO. Set AGC: OFF; LOW; MIDDLE; HIGH.Set HBLC by
left and right buttons: AUTO; ON. When HBLC is on, you can set SET LEVEL, GRAY
MODE and MASK SEL.Set D-WDR by left and right buttons.
D-WDR
D-WDR LEVEL 010 RETURN
COLOR
R-Y GAIN
B-Y GAIN
WB MODE
128
128
EXIT
AWC
WB-MANUAL
M. WB B
RETURN
M. WB R
064
064
DAY&NIGHT
C_SUP
EXIT
D&N MODE
060
030
A_SUP
AUTO
D&N-AUTO
DAY>NIGHT
DWELL TIME
BURST
013
019
NIGHT>DAY
OFF
RETURN
003
D&N-EXT.
DAY>NIGHT
DWELL TIME
BURST
100
210
NIGHT>DAY
OFF
RETURN
003
SMART IR AUTO
FUNCTION
SHARPNESS
MIRROR
OFF
020
LSC
OFF
EXIT SAVE
MOTION:
1. Move the cursor to MOTION, and set MOTION by left and right buttons: ON; OFF.
When MOTION is on, you can set 1~4 AREA; SENSITI.; DISPLAY ICON; ALARM.
MOTION
AREA SEL
MOTION
AREA 1
025 SENSITI.
OFF
DISPLAY
SAVE
HOLD TIME
ALARM
EXIT
ICON
ON
008
PRIVACY:
PRIVACY
MASK 2
MASK 1
MASK 3
OFF
MASK 4
SAVE
MASK 5
MASK 6
MASK 7
MASK 8
EXIT
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SETUP:1. Move the cursor to SETUP. Move the cursor to TITLE by up and down buttons, and set
TITLE by left and right buttons: ON; OFF. When TITLE is on, select different user titles.
SETUP
MANUAL DPC
TITLE
MANUAL
AUTO AUTO DPC
OFF
OLPF
SAVE
MONITOR
GAMMA
EXIT
650
0.45
CRT
USER TITLE
CLR POS RET
ABCDE FG H I J K L M N O P
QR S T U VW XYZ 0 1 2 3 4 5
6 7 8 9 ! “ # $%& ‘ ( ) * +
, . / : ; < >? @ [ ] ^ _= \_
3. Move the cursor to AUTO DPC, and set AUTO DPC by left and right buttons: ON; OFF.
AUTO DPC-AUTO
DPC RUN
DPC LEVEL
RETURN
020
MANUAL DPC-MANUAL
BLACK THR
WHITE THR
DPC LEVEL
050
RETURN
030
030
SYSTEM:
1. Move the cursor to SYSTEM. Move the cursor to CAMERA ID by up and down buttons and
set CAMERA ID by left and right buttons.Move the cursor to COMMUNI., And set
COMMUNI.: ON; OFF. When COMMUNI is on, you can select PROTOCOL and BAUDRATE.
Move the cursor to LANGUAGE, and set it: CHINESE; ENGLISH.
SYSTEM
COMMUNI.
CAMERA ID
LANGUAGE
001
EXIT
OFF
ENGLISH
SAVE
COMMUNICATION
BAUDRATE
PROTOCOL
RETURN
PELCO-D
9600
EXIT:1.Move the cursor to EXIT. Move the cursor to FACTORY SET by up and down buttons and
set it: YES; NO. Moving the cursor SAVE&EXIT is to save the changes you have made and
exit.Move the cursor to EXIT and exit the menu directly.
EXIT
SAVE&EXIT
FACTORY SET
EXIT
NO
1. Move the cursor to PRIVACY, and set MASK1~8 by left and right buttons: OFF; ON.
When MASK 1~8 is on, you can set the privacy masks and color.
2.Move the cursor to MANUAL DPC, and set MANUAL DPC by left and right buttons: ON; OFF.
3. Move the cursor to AGC, and set AGC by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4. Set 3D-DNR by left and right buttons: OFF; LOW; MIDDLE; HIGH.
5. Set SENSE UP by left and right buttons: OFF; 2 ; 4 ; 8 ; 16 ; 32 ; 64 ; 128 ; 256 ; 512 .
4.Move the cursor to OLPF, and set OLPF by left and right buttons: 650; 850.
5.Move the cursor to MONITOR, and set MONITOR by left and right buttons:CRT; LCD.
6.Move the cursor to GAMMA, and set GAMMA by left and right buttons: 0.45 0.6 1 other.
EN-X1-330-111110
SAVE
SYSTEM (rendszer)1. A kurzorral válassza ki a SYSTEM menüpontot.
CAMERA ID (kamera azonosító): adja meg a kamera azonosítóját. COMMUNI. (kommunikáció): bekapcsolt állapotban megadható a PROTOCOL (kommunikációs protokoll) és a BAUDRATE (kommunikációs sebesség). LANGUAGE (nyelv): válassza ki a menü nyelvét.
MENU OPERATION INSTRUCTION
SETUP:
1. Press MENU button to display SETUP. Move the cursor to EXPOSURE. And move the
cursor to LENS by up and down buttons and set LENS by left and right buttons: manual iris
lens; DC drive iris lens. E.SHUTTER and BRIGHT can be set.
EXPOSURE:
1. Move the cursor to COLOR, and set WB MODE by left and right buttons: MANUAL; ATW;
AWB; ATW LOCK. When MANUAL is selected, you can set color temperature.
COLOR:
DAY&NIGHT:
1. Move the cursor to DAY&NIGHT, and set DAY&NIGHT by left and right buttons: AUTO;
COLOR; WHITE; EXT.
FUNCTION:
1. Move the cursor to FUNCTION. Move the cursor to MIRROR by up and down buttons, and
set MIRROR by left and right buttons: ON; OFF.Move the cursor to SHARPNESS, and set
SHARPNESS range.Move the cursor to LSC, and set it: ON; OFF.
EXP WB D&N FUNC MOT PVM SET SYS EXIT
EXPOSURE
HBLC/D-WDR
AGC
3D-DNR
SENSE-UP
EXIT
LENS
LOW
HIGH
ELCOFF
OFFSAVE
LENS-ELC
BRIGHT
E. SHUTTER
RETURN
AUTO 050
HLI
MODE
SET LEVEL
GRAY MODE
MASK SEL
HBLC
BLACK
010
NIGHT
RETURN
MASK 1
2. Move the cursor to HBLC/D-WDR and set HBLC/D-WDR by left and right buttons: BLC; set BLC
by left and right buttons: MANUAL; AUTO. Set AGC: OFF; LOW; MIDDLE; HIGH.Set HBLC by
left and right buttons: AUTO; ON. When HBLC is on, you can set SET LEVEL, GRAY
MODE and MASK SEL.Set D-WDR by left and right buttons.
D-WDR
D-WDR LEVEL 010 RETURN
COLOR
R-Y GAIN
B-Y GAIN
WB MODE
128
128
EXIT
AWC
WB-MANUAL
M. WB B
RETURN
M. WB R
064
064
DAY&NIGHT
C_SUP
EXIT
D&N MODE
060
030
A_SUP
AUTO
D&N-AUTO
DAY>NIGHT
DWELL TIME
BURST
013
019
NIGHT>DAY
OFF
RETURN
003
D&N-EXT.
DAY>NIGHT
DWELL TIME
BURST
100
210
NIGHT>DAY
OFF
RETURN
003
SMART IR AUTO
FUNCTION
SHARPNESS
MIRROR
OFF
020
LSC
OFF
EXIT SAVE
MOTION:
1. Move the cursor to MOTION, and set MOTION by left and right buttons: ON; OFF.
When MOTION is on, you can set 1~4 AREA; SENSITI.; DISPLAY ICON; ALARM.
MOTION
AREA SEL
MOTION
AREA 1
025 SENSITI.
OFF
DISPLAY
SAVE
HOLD TIME
ALARM
EXIT
ICON
ON
008
PRIVACY:
PRIVACY
MASK 2
MASK 1
MASK 3
OFF
MASK 4
SAVE
MASK 5
MASK 6
MASK 7
MASK 8
EXIT
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SETUP:1. Move the cursor to SETUP. Move the cursor to TITLE by up and down buttons, and set
TITLE by left and right buttons: ON; OFF. When TITLE is on, select different user titles.
SETUP
MANUAL DPC
TITLE
MANUAL
AUTO AUTO DPC
OFF
OLPF
SAVE
MONITOR
GAMMA
EXIT
650
0.45
CRT
USER TITLE
CLR POS RET
ABCDE FG H I J K L M N O P
QR S T U VW XYZ 0 1 2 3 4 5
6 7 8 9 ! “ # $%& ‘ ( ) * +
, . / : ; < >? @ [ ] ^ _= \_
3. Move the cursor to AUTO DPC, and set AUTO DPC by left and right buttons: ON; OFF.
AUTO DPC-AUTO
DPC RUN
DPC LEVEL
RETURN
020
MANUAL DPC-MANUAL
BLACK THR
WHITE THR
DPC LEVEL
050
RETURN
030
030
SYSTEM:
1. Move the cursor to SYSTEM. Move the cursor to CAMERA ID by up and down buttons and
set CAMERA ID by left and right buttons.Move the cursor to COMMUNI., And set
COMMUNI.: ON; OFF. When COMMUNI is on, you can select PROTOCOL and BAUDRATE.
Move the cursor to LANGUAGE, and set it: CHINESE; ENGLISH.
SYSTEM
COMMUNI.
CAMERA ID
LANGUAGE
001
EXIT
OFF
ENGLISH
SAVE
COMMUNICATION
BAUDRATE
PROTOCOL
RETURN
PELCO-D
9600
EXIT:1.Move the cursor to EXIT. Move the cursor to FACTORY SET by up and down buttons and
set it: YES; NO. Moving the cursor SAVE&EXIT is to save the changes you have made and
exit.Move the cursor to EXIT and exit the menu directly.
EXIT
SAVE&EXIT
FACTORY SET
EXIT
NO
1. Move the cursor to PRIVACY, and set MASK1~8 by left and right buttons: OFF; ON.
When MASK 1~8 is on, you can set the privacy masks and color.
2.Move the cursor to MANUAL DPC, and set MANUAL DPC by left and right buttons: ON; OFF.
3. Move the cursor to AGC, and set AGC by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4. Set 3D-DNR by left and right buttons: OFF; LOW; MIDDLE; HIGH.
5. Set SENSE UP by left and right buttons: OFF; 2 ; 4 ; 8 ; 16 ; 32 ; 64 ; 128 ; 256 ; 512 .
4.Move the cursor to OLPF, and set OLPF by left and right buttons: 650; 850.
5.Move the cursor to MONITOR, and set MONITOR by left and right buttons:CRT; LCD.
6.Move the cursor to GAMMA, and set GAMMA by left and right buttons: 0.45 0.6 1 other.
EN-X1-330-111110
SAVE
EXIT (kilépés)1. A kurzorral válassza ki az EXIT menüpontot.
FACTORY SET: Gyári alphelyzetbe állítás SAVE & EXIT: Kilépés a menüből a változtatások elmentésével. EXIT: Kilépés a menüből, a változtatások elmentése nélkül.
MENU OPERATION INSTRUCTION
SETUP:
1. Press MENU button to display SETUP. Move the cursor to EXPOSURE. And move the
cursor to LENS by up and down buttons and set LENS by left and right buttons: manual iris
lens; DC drive iris lens. E.SHUTTER and BRIGHT can be set.
EXPOSURE:
1. Move the cursor to COLOR, and set WB MODE by left and right buttons: MANUAL; ATW;
AWB; ATW LOCK. When MANUAL is selected, you can set color temperature.
COLOR:
DAY&NIGHT:
1. Move the cursor to DAY&NIGHT, and set DAY&NIGHT by left and right buttons: AUTO;
COLOR; WHITE; EXT.
FUNCTION:
1. Move the cursor to FUNCTION. Move the cursor to MIRROR by up and down buttons, and
set MIRROR by left and right buttons: ON; OFF.Move the cursor to SHARPNESS, and set
SHARPNESS range.Move the cursor to LSC, and set it: ON; OFF.
EXP WB D&N FUNC MOT PVM SET SYS EXIT
EXPOSURE
HBLC/D-WDR
AGC
3D-DNR
SENSE-UP
EXIT
LENS
LOW
HIGH
ELCOFF
OFFSAVE
LENS-ELC
BRIGHT
E. SHUTTER
RETURN
AUTO 050
HLI
MODE
SET LEVEL
GRAY MODE
MASK SEL
HBLC
BLACK
010
NIGHT
RETURN
MASK 1
2. Move the cursor to HBLC/D-WDR and set HBLC/D-WDR by left and right buttons: BLC; set BLC
by left and right buttons: MANUAL; AUTO. Set AGC: OFF; LOW; MIDDLE; HIGH.Set HBLC by
left and right buttons: AUTO; ON. When HBLC is on, you can set SET LEVEL, GRAY
MODE and MASK SEL.Set D-WDR by left and right buttons.
D-WDR
D-WDR LEVEL 010 RETURN
COLOR
R-Y GAIN
B-Y GAIN
WB MODE
128
128
EXIT
AWC
WB-MANUAL
M. WB B
RETURN
M. WB R
064
064
DAY&NIGHT
C_SUP
EXIT
D&N MODE
060
030
A_SUP
AUTO
D&N-AUTO
DAY>NIGHT
DWELL TIME
BURST
013
019
NIGHT>DAY
OFF
RETURN
003
D&N-EXT.
DAY>NIGHT
DWELL TIME
BURST
100
210
NIGHT>DAY
OFF
RETURN
003
SMART IR AUTO
FUNCTION
SHARPNESS
MIRROR
OFF
020
LSC
OFF
EXIT SAVE
MOTION:
1. Move the cursor to MOTION, and set MOTION by left and right buttons: ON; OFF.
When MOTION is on, you can set 1~4 AREA; SENSITI.; DISPLAY ICON; ALARM.
MOTION
AREA SEL
MOTION
AREA 1
025 SENSITI.
OFF
DISPLAY
SAVE
HOLD TIME
ALARM
EXIT
ICON
ON
008
PRIVACY:
PRIVACY
MASK 2
MASK 1
MASK 3
OFF
MASK 4
SAVE
MASK 5
MASK 6
MASK 7
MASK 8
EXIT
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SETUP:1. Move the cursor to SETUP. Move the cursor to TITLE by up and down buttons, and set
TITLE by left and right buttons: ON; OFF. When TITLE is on, select different user titles.
SETUP
MANUAL DPC
TITLE
MANUAL
AUTO AUTO DPC
OFF
OLPF
SAVE
MONITOR
GAMMA
EXIT
650
0.45
CRT
USER TITLE
CLR POS RET
ABCDE FG H I J K L M N O P
QR S T U VW XYZ 0 1 2 3 4 5
6 7 8 9 ! “ # $%& ‘ ( ) * +
, . / : ; < >? @ [ ] ^ _= \_
3. Move the cursor to AUTO DPC, and set AUTO DPC by left and right buttons: ON; OFF.
AUTO DPC-AUTO
DPC RUN
DPC LEVEL
RETURN
020
MANUAL DPC-MANUAL
BLACK THR
WHITE THR
DPC LEVEL
050
RETURN
030
030
SYSTEM:
1. Move the cursor to SYSTEM. Move the cursor to CAMERA ID by up and down buttons and
set CAMERA ID by left and right buttons.Move the cursor to COMMUNI., And set
COMMUNI.: ON; OFF. When COMMUNI is on, you can select PROTOCOL and BAUDRATE.
Move the cursor to LANGUAGE, and set it: CHINESE; ENGLISH.
SYSTEM
COMMUNI.
CAMERA ID
LANGUAGE
001
EXIT
OFF
ENGLISH
SAVE
COMMUNICATION
BAUDRATE
PROTOCOL
RETURN
PELCO-D
9600
EXIT:1.Move the cursor to EXIT. Move the cursor to FACTORY SET by up and down buttons and
set it: YES; NO. Moving the cursor SAVE&EXIT is to save the changes you have made and
exit.Move the cursor to EXIT and exit the menu directly.
EXIT
SAVE&EXIT
FACTORY SET
EXIT
NO
1. Move the cursor to PRIVACY, and set MASK1~8 by left and right buttons: OFF; ON.
When MASK 1~8 is on, you can set the privacy masks and color.
2.Move the cursor to MANUAL DPC, and set MANUAL DPC by left and right buttons: ON; OFF.
3. Move the cursor to AGC, and set AGC by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4. Set 3D-DNR by left and right buttons: OFF; LOW; MIDDLE; HIGH.
5. Set SENSE UP by left and right buttons: OFF; 2 ; 4 ; 8 ; 16 ; 32 ; 64 ; 128 ; 256 ; 512 .
4.Move the cursor to OLPF, and set OLPF by left and right buttons: 650; 850.
5.Move the cursor to MONITOR, and set MONITOR by left and right buttons:CRT; LCD.
6.Move the cursor to GAMMA, and set GAMMA by left and right buttons: 0.45 0.6 1 other.
EN-X1-330-111110
SAVE
MENU OPERATION INSTRUCTION
SETUP:
1. Press MENU button to display SETUP. Move the cursor to EXPOSURE. And move the
cursor to LENS by up and down buttons and set LENS by left and right buttons: manual iris
lens; DC drive iris lens. E.SHUTTER and BRIGHT can be set.
EXPOSURE:
1. Move the cursor to COLOR, and set WB MODE by left and right buttons: MANUAL; ATW;
AWB; ATW LOCK. When MANUAL is selected, you can set color temperature.
COLOR:
DAY&NIGHT:
1. Move the cursor to DAY&NIGHT, and set DAY&NIGHT by left and right buttons: AUTO;
COLOR; WHITE; EXT.
FUNCTION:
1. Move the cursor to FUNCTION. Move the cursor to MIRROR by up and down buttons, and
set MIRROR by left and right buttons: ON; OFF.Move the cursor to SHARPNESS, and set
SHARPNESS range.Move the cursor to LSC, and set it: ON; OFF.
EXP WB D&N FUNC MOT PVM SET SYS EXIT
EXPOSURE
HBLC/D-WDR
AGC
3D-DNR
SENSE-UP
EXIT
LENS
LOW
HIGH
ELCOFF
OFFSAVE
LENS-ELC
BRIGHT
E. SHUTTER
RETURN
AUTO 050
HLI
MODE
SET LEVEL
GRAY MODE
MASK SEL
HBLC
BLACK
010
NIGHT
RETURN
MASK 1
2. Move the cursor to HBLC/D-WDR and set HBLC/D-WDR by left and right buttons: BLC; set BLC
by left and right buttons: MANUAL; AUTO. Set AGC: OFF; LOW; MIDDLE; HIGH.Set HBLC by
left and right buttons: AUTO; ON. When HBLC is on, you can set SET LEVEL, GRAY
MODE and MASK SEL.Set D-WDR by left and right buttons.
D-WDR
D-WDR LEVEL 010 RETURN
COLOR
R-Y GAIN
B-Y GAIN
WB MODE
128
128
EXIT
AWC
WB-MANUAL
M. WB B
RETURN
M. WB R
064
064
DAY&NIGHT
C_SUP
EXIT
D&N MODE
060
030
A_SUP
AUTO
D&N-AUTO
DAY>NIGHT
DWELL TIME
BURST
013
019
NIGHT>DAY
OFF
RETURN
003
D&N-EXT.
DAY>NIGHT
DWELL TIME
BURST
100
210
NIGHT>DAY
OFF
RETURN
003
SMART IR AUTO
FUNCTION
SHARPNESS
MIRROR
OFF
020
LSC
OFF
EXIT SAVE
MOTION:
1. Move the cursor to MOTION, and set MOTION by left and right buttons: ON; OFF.
When MOTION is on, you can set 1~4 AREA; SENSITI.; DISPLAY ICON; ALARM.
MOTION
AREA SEL
MOTION
AREA 1
025 SENSITI.
OFF
DISPLAY
SAVE
HOLD TIME
ALARM
EXIT
ICON
ON
008
PRIVACY:
PRIVACY
MASK 2
MASK 1
MASK 3
OFF
MASK 4
SAVE
MASK 5
MASK 6
MASK 7
MASK 8
EXIT
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SETUP:1. Move the cursor to SETUP. Move the cursor to TITLE by up and down buttons, and set
TITLE by left and right buttons: ON; OFF. When TITLE is on, select different user titles.
SETUP
MANUAL DPC
TITLE
MANUAL
AUTO AUTO DPC
OFF
OLPF
SAVE
MONITOR
GAMMA
EXIT
650
0.45
CRT
USER TITLE
CLR POS RET
ABCDE FG H I J K L M N O P
QR S T U VW XYZ 0 1 2 3 4 5
6 7 8 9 ! “ # $%& ‘ ( ) * +
, . / : ; < >? @ [ ] ^ _= \_
3. Move the cursor to AUTO DPC, and set AUTO DPC by left and right buttons: ON; OFF.
AUTO DPC-AUTO
DPC RUN
DPC LEVEL
RETURN
020
MANUAL DPC-MANUAL
BLACK THR
WHITE THR
DPC LEVEL
050
RETURN
030
030
SYSTEM:
1. Move the cursor to SYSTEM. Move the cursor to CAMERA ID by up and down buttons and
set CAMERA ID by left and right buttons.Move the cursor to COMMUNI., And set
COMMUNI.: ON; OFF. When COMMUNI is on, you can select PROTOCOL and BAUDRATE.
Move the cursor to LANGUAGE, and set it: CHINESE; ENGLISH.
SYSTEM
COMMUNI.
CAMERA ID
LANGUAGE
001
EXIT
OFF
ENGLISH
SAVE
COMMUNICATION
BAUDRATE
PROTOCOL
RETURN
PELCO-D
9600
EXIT:1.Move the cursor to EXIT. Move the cursor to FACTORY SET by up and down buttons and
set it: YES; NO. Moving the cursor SAVE&EXIT is to save the changes you have made and
exit.Move the cursor to EXIT and exit the menu directly.
EXIT
SAVE&EXIT
FACTORY SET
EXIT
NO
1. Move the cursor to PRIVACY, and set MASK1~8 by left and right buttons: OFF; ON.
When MASK 1~8 is on, you can set the privacy masks and color.
2.Move the cursor to MANUAL DPC, and set MANUAL DPC by left and right buttons: ON; OFF.
3. Move the cursor to AGC, and set AGC by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4. Set 3D-DNR by left and right buttons: OFF; LOW; MIDDLE; HIGH.
5. Set SENSE UP by left and right buttons: OFF; 2 ; 4 ; 8 ; 16 ; 32 ; 64 ; 128 ; 256 ; 512 .
4.Move the cursor to OLPF, and set OLPF by left and right buttons: 650; 850.
5.Move the cursor to MONITOR, and set MONITOR by left and right buttons:CRT; LCD.
6.Move the cursor to GAMMA, and set GAMMA by left and right buttons: 0.45 0.6 1 other.
EN-X1-330-111110
SAVE
MENU OPERATION INSTRUCTION
SETUP:
1. Press MENU button to display SETUP. Move the cursor to EXPOSURE. And move the
cursor to LENS by up and down buttons and set LENS by left and right buttons: manual iris
lens; DC drive iris lens. E.SHUTTER and BRIGHT can be set.
EXPOSURE:
1. Move the cursor to COLOR, and set WB MODE by left and right buttons: MANUAL; ATW;
AWB; ATW LOCK. When MANUAL is selected, you can set color temperature.
COLOR:
DAY&NIGHT:
1. Move the cursor to DAY&NIGHT, and set DAY&NIGHT by left and right buttons: AUTO;
COLOR; WHITE; EXT.
FUNCTION:
1. Move the cursor to FUNCTION. Move the cursor to MIRROR by up and down buttons, and
set MIRROR by left and right buttons: ON; OFF.Move the cursor to SHARPNESS, and set
SHARPNESS range.Move the cursor to LSC, and set it: ON; OFF.
EXP WB D&N FUNC MOT PVM SET SYS EXIT
EXPOSURE
HBLC/D-WDR
AGC
3D-DNR
SENSE-UP
EXIT
LENS
LOW
HIGH
ELCOFF
OFFSAVE
LENS-ELC
BRIGHT
E. SHUTTER
RETURN
AUTO 050
HLI
MODE
SET LEVEL
GRAY MODE
MASK SEL
HBLC
BLACK
010
NIGHT
RETURN
MASK 1
2. Move the cursor to HBLC/D-WDR and set HBLC/D-WDR by left and right buttons: BLC; set BLC
by left and right buttons: MANUAL; AUTO. Set AGC: OFF; LOW; MIDDLE; HIGH.Set HBLC by
left and right buttons: AUTO; ON. When HBLC is on, you can set SET LEVEL, GRAY
MODE and MASK SEL.Set D-WDR by left and right buttons.
D-WDR
D-WDR LEVEL 010 RETURN
COLOR
R-Y GAIN
B-Y GAIN
WB MODE
128
128
EXIT
AWC
WB-MANUAL
M. WB B
RETURN
M. WB R
064
064
DAY&NIGHT
C_SUP
EXIT
D&N MODE
060
030
A_SUP
AUTO
D&N-AUTO
DAY>NIGHT
DWELL TIME
BURST
013
019
NIGHT>DAY
OFF
RETURN
003
D&N-EXT.
DAY>NIGHT
DWELL TIME
BURST
100
210
NIGHT>DAY
OFF
RETURN
003
SMART IR AUTO
FUNCTION
SHARPNESS
MIRROR
OFF
020
LSC
OFF
EXIT SAVE
MOTION:
1. Move the cursor to MOTION, and set MOTION by left and right buttons: ON; OFF.
When MOTION is on, you can set 1~4 AREA; SENSITI.; DISPLAY ICON; ALARM.
MOTION
AREA SEL
MOTION
AREA 1
025 SENSITI.
OFF
DISPLAY
SAVE
HOLD TIME
ALARM
EXIT
ICON
ON
008
PRIVACY:
PRIVACY
MASK 2
MASK 1
MASK 3
OFF
MASK 4
SAVE
MASK 5
MASK 6
MASK 7
MASK 8
EXIT
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SETUP:1. Move the cursor to SETUP. Move the cursor to TITLE by up and down buttons, and set
TITLE by left and right buttons: ON; OFF. When TITLE is on, select different user titles.
SETUP
MANUAL DPC
TITLE
MANUAL
AUTO AUTO DPC
OFF
OLPF
SAVE
MONITOR
GAMMA
EXIT
650
0.45
CRT
USER TITLE
CLR POS RET
ABCDE FG H I J K L M N O P
QR S T U VW XYZ 0 1 2 3 4 5
6 7 8 9 ! “ # $%& ‘ ( ) * +
, . / : ; < >? @ [ ] ^ _= \_
3. Move the cursor to AUTO DPC, and set AUTO DPC by left and right buttons: ON; OFF.
AUTO DPC-AUTO
DPC RUN
DPC LEVEL
RETURN
020
MANUAL DPC-MANUAL
BLACK THR
WHITE THR
DPC LEVEL
050
RETURN
030
030
SYSTEM:
1. Move the cursor to SYSTEM. Move the cursor to CAMERA ID by up and down buttons and
set CAMERA ID by left and right buttons.Move the cursor to COMMUNI., And set
COMMUNI.: ON; OFF. When COMMUNI is on, you can select PROTOCOL and BAUDRATE.
Move the cursor to LANGUAGE, and set it: CHINESE; ENGLISH.
SYSTEM
COMMUNI.
CAMERA ID
LANGUAGE
001
EXIT
OFF
ENGLISH
SAVE
COMMUNICATION
BAUDRATE
PROTOCOL
RETURN
PELCO-D
9600
EXIT:1.Move the cursor to EXIT. Move the cursor to FACTORY SET by up and down buttons and
set it: YES; NO. Moving the cursor SAVE&EXIT is to save the changes you have made and
exit.Move the cursor to EXIT and exit the menu directly.
EXIT
SAVE&EXIT
FACTORY SET
EXIT
NO
1. Move the cursor to PRIVACY, and set MASK1~8 by left and right buttons: OFF; ON.
When MASK 1~8 is on, you can set the privacy masks and color.
2.Move the cursor to MANUAL DPC, and set MANUAL DPC by left and right buttons: ON; OFF.
3. Move the cursor to AGC, and set AGC by left and right buttons: OFF; LOW; MIDDLE; HIGH.
4. Set 3D-DNR by left and right buttons: OFF; LOW; MIDDLE; HIGH.
5. Set SENSE UP by left and right buttons: OFF; 2 ; 4 ; 8 ; 16 ; 32 ; 64 ; 128 ; 256 ; 512 .
4.Move the cursor to OLPF, and set OLPF by left and right buttons: 650; 850.
5.Move the cursor to MONITOR, and set MONITOR by left and right buttons:CRT; LCD.
6.Move the cursor to GAMMA, and set GAMMA by left and right buttons: 0.45 0.6 1 other.
EN-X1-330-111110
SAVE
SETUP (beállítás)1. A kurzorral válassza ki a SETUP menüpontot.
A TITLE (kameranév) menüpontban be (ON) vagy kikapcsolható (OFF) a kameranév megjelenítése. Bekapcsolt kameranév esetén a név beállítható.
2. A kurzorral válassza ki a MANUAL DPC menüpontot. A funkció be (ON) vagy ki (OFF) kapcsolható. Állítsa be az értékét.
3. A kurzorral válassza ki az AUTO DPC menüpontot. A funkció be (ON) vagy ki (OFF) kapcsolható. Állítsa be az értékét.
4. A kurzorral válassza ki az OLPF menüpontot. Az értéke kiválasztható: 650; 850.
5. A kurzorral válassza ki a MONITOR menüpontot. Válassza ki a használt megjelenítőeszközt: CRT; LCD.
6. A kurzorral válassza ki a GAMMA menüpontot. Állítsa be az értékét: 0.45; 0.6; 1; OTHER (egyéb).
6
7
Modell TechSon TC Pro-8650 IRVF DN OSD 4–9
Érzékelő
Képérzékelő 1/3” nagyérzékenységű CCDVideo formátum PALFelbontás 650 TV sorÉrzékenység 0 Lux (IR bekapcsolva)Jel-Zaj viszony Jobb mint 50 dB (AGC kikapcsolva)
Menü vezérlés
AGC LOW; MIDDLE, HIGHBLC ON; OFF; HS BLCZársebesség 1/50 – 1/100000Fehér egyensúly
Mód MANUAL; AUTO TRACKING; AUTOMATICTartomány AUTOMATIC: 2200 – 10 000 °K
Tükrözés Ki / Be Nappali/éjszakai mód Automatikus; színes; fekete-fehérMozgásérzékelés Ki / BePrivát zóna Ki / BeKép beállítás Fényerő, képélességKamera név Ki / Be (max. 15 karakter)Zajcsökkentés 3D-DNR: Ki / BeSzinkronizálás Belső
Tápfeszültség 12 V DCÁramfelvétel 500 mAObjektív 4–9 mm varifokálisIR megvilágítási távolság 40 mÜzemi hőmérséklet -10 – 50°CTárolási hőmérséklet -20 – 50°CMéret 250 x 114 x 93 mmSúly 1000 g
MÉRETEK, MűSzaKI aDaTOK
A műszaki paraméterek előzetes bejelentés nélkül is változhatnak.
114
mm
84 mm249 mm
8