17
NISTM’s 2010 Conference and Trade Show Guide 1

12th Annual International Conference on Aboveground Storage Tanks

Embed Size (px)

DESCRIPTION

Nationally recognized experts will provide the latest information available on tank management in this three-day course. You can get answers to your questions about the most recent issues and technological advancements in API Standards, Construction, Spill Response, Internal Lining, Piping, Release Detection, Contamination Cleanup and Response, Overfill Protection, Upgrading and Relocation, Risk Based Assessments, Secondary Containment, Release Tank Cleaning, Internal Inspections, Corrosion Control, Terminal Operation, Integrity, Pipeline Safety and more!

Citation preview

Page 1: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide 1

Page 2: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide2

EVERYTHINGEVERYTHING under one roof.under one roof.

HMT has been providing quality products and services to the global AST market for

over 30 years.

The company was founded on products and services to reduce the emissions in

aboveground storage tanks. Whether it is new advanced designs for internal

floating roofs, geodesic domes, or state of the art primary and secondary seals,

HMT is and will continue to be the industry leader in storage tank emission

control around the world.

HMT Inc. 24 Waterway Ave., Ste. 400

The Woodlands, Texas 77380 USA Phone + 1.281.681.7000

[email protected] V i s i t u s a t w w w . h m t t a n k . c o m

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S

Page 3: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide 3

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S EVENTS SCHEDULE

3rd Annual Golf Tournament

monday, March 1, 20101:00pm Shotgun Start

Conference Hours: Tuesday, March 2, 2010

8:15am - 5:30pm

Wednesday, March 3, 20108:00am - 5:00pm

Thursday, March 4, 2010

8:00am - 12:00pm

Tradeshow Hours:

Tuesday, March 2, 20108:00am - 5:30pm

Wednesday, March 3, 2010

8:30am - 3:00pm

Welcome Reception:

Monday, March 1, 20108:30pm – 10:00pm

Cocktail Mixers:

Tuesday, March 2, 20105:30pm

Wednesday, March 3, 2010

5:00pm

Schedule of Events

Page 4: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide4

Sponsors of the 12th AnnualInternational Conference on Aboveground Storage Tanks

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank SSPONSOR LISTING

EVERYTHINGEVERYTHING under one roof.under one roof.

HMT has been providing quality products and services to the global AST market for

over 30 years.

The company was founded on products and services to reduce the emissions in

aboveground storage tanks. Whether it is new advanced designs for internal

floating roofs, geodesic domes, or state of the art primary and secondary seals,

HMT is and will continue to be the industry leader in storage tank emission

control around the world.

HMT Inc. 24 Waterway Ave., Ste. 400

The Woodlands, Texas 77380 USA Phone + 1.281.681.7000

[email protected] V i s i t u s a t w w w . h m t t a n k . c o m

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S

Page 5: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide 5

Day 1 aGENDa Tuesday, March 2, 2010

Morning Breakfast Sponsored by HMT Inc

8:15 A.M.

8:30 A.M.

9:15 A.M.

9:45 A.M.

10:15 A.M.

11:15 A.M.

12:05 A.M.

12:30 P.M.

1:45 P.M.

2:30 P.M.

3:15 P.M.

4:00 P.M.

4:45 P.M.

5:30 P.M.

7:15 A.M.

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S

IntroductionMarshall Mott-SmithNational Institute for Storage Tank Management

EPA SPCC UpdateMark Howard, EPA Oil Center

API Standards Update Steve Crimaudo, API

Pipeline UpdateWayne T. Lemoi, CATS Program ManagerU.S. Dot/PHMSA Southern Region

Mid-Morning Break Sponsored by TEMCOR

USCG Spill Prevention and Response Update Brian Knapp, LCDR, US Coast Guard

NASAP Report Chris Bashor, Minnesota DEP

Lunch Sponsored by HCNA Hansa Consult North America & Marseal Detection and Remediation of Microbial Contamination in a Changing World of Fuels • Ed English, Fuel Quality Services

Everything You Wanted to Know About Tank Floor Scanning but Were Afraid to Ask Morris Kline, HMT Inc.

Afternoon Break Sponsored by A. R. Watson, Inc.

API/EEMUA Collaboration on Standards Mark Baker, Baker Engineering

Ground Improvement Program for Two – 265 foot diameter Oil Storage Tanks in the Republic of PanamaMark E. Plaskett, P.E., Hayward Baker

Cocktail Mixer Sponsored by Consolidated Fabrication & Constructors, Inc.

AGENDA Day 1

Page 6: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide6

Day 2 aGENDa MornIng SeSSIon Wednesday, March 3, 2010

ASt SESSIOnS AVIAtIOn SESSIOnS EnERGY/SAFEtY/ShOP-FABRICAtED tAnKS

8:30 A.M.

9:15 A.M.

10:00 A.M.

10:45 A.M.

11:15 A.M.

12:00 P.M.

additional Conference and tradeshow sponsors:Conference & Tradeshow Program Brochure Sponsored by HMT Inc.

Golf Tournament Title Sponsored by HMT Inc.Internet Cafe and Audio Visual Sponsored by Corrosion Control, Inc.

Conference Attendee Bag Sponsored by The Equity Engineering Group, Inc.Badge Lanyard Sponsored by TEC Serv LLCHotel Room Key Sponsored by Telvent DTNPopcorn Sponsored by International Tank Service

InTank In-Service tank Inspections; Overview of the Current TechnologyGeert Bontekoe, TechCorr

API RBI Tank Module and an Example or Two of a Tank RBI Assessment Joel L. Andreani, The Equity Engineering Group, Inc.

Break

SPCC Updates and the Impact on AST’s Joyce Rizzo, JD2 Environmental

API 651 CP Review, ECDA Tank Inspections and Corrosion PitfallsLouis Koszewski,U.S. Tank Protectors, Inc.

Lunch

Design and Construction of Military Fuels Facilities - An OverviewMichael Zapata, P.E.Air Force Civil Engineer Support Agency

Pipeline Integrity Programs for Military & Domestic Aircraft Fueling SystemsCraig Meier, Corrosion Control Incorporated

Airport Fuel Storage and Distribution Sys-tems: A Seamless Approach to Integ-rity TestingDoug Mann, Vista Leak Detection, Inc.

The Impact of Alternative Fuels in Aviation Fuel InfrastructureDean Flessas, Pond & Company

An Overview of Alternative FuelsTeresa L. Alleman, National Renewable Energy Laboratory

Selected OSHA Standards Applied to ASTs - A ReviewJoan Spencer, U.S. Department of Labor

Shop-Fabricated Tanks – Piping and Stage II IssuesJohn Cignatta, Datanet Engineering, Inc.

STI Shop-FabricatedWayne Geyer, Steel Tank Institute

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank SAGENDA Day 2

Page 7: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide 7

Day 2 aGENDa afternoon SeSSIon Wednesday, March 3, 2010

ASt SESSIOnS AVIAtIOn SESSIOnS EnERGY/SAFEtY/ShOP-FABRICAtED tAnKS

1:15 P.M.

1:45 P.M.

2:15 P.M.

3:00 P.M.

3:30 P.M.

4:15 P.M.

5:00 P.M.

Afternoon Break Sponsored by DJA Inspection Services, Inc.

Volumetric Based Monthly Monitoring of ASTsGeorge Thuemling, Varec, Inc.

Emergency Relief Venting for ASTs – Changes You Probably MissedKris Allegood, P.E.Pond & Company

Applications for Lined HDPE Pipe Systems Glyn Owens, UPP

Cost Savings on Tank FoundationAlan Watson, A. R. Watson, Inc.

Risk Management for International Trade and Shipping Rakesh Mehra, Bharat Petroleum

Adjourn

Corrosion Control Considerations of Aviation Fueling Facilities Eric Bonner,Corrpro Companies

Overview of Airport Hydrant Systems: How they Work, What can go Wrong, Best Management Practices to Prevent Leaks and SpillsChris Bashor, Minnesota DEP

Safe Practice in the Operation and Maintenance of Petroleum FacilitiesJack Lavin, National Petroleum Management Association

Standards, Fuel Types and Distribution SystemsChuck Travelstead, Brown-Minneapolis Tank

Maintenance Challenges for Aging Bulk Fuel Farms – AST Exterior Paint and Concrete Dike IntegrityDennis Eryou,Eryou Engineering

Biodiesel TopicSteve Howell, MARC-IV Consulting, Inc.

Return On Investing in Wireless Remote Monitoring of Above Ground Tanks Ed Dort, DirectorWireless Division PS Energy Group, Inc.

Cost Effective Design Option for Tank HeatingDavid Taylor, Chromalox

Welding in Confined SpacesJerome Spear, CSP, CIH,J.E. Spear Consulting, LP

The ‘Other’ Costs of the Project: Things to Consider When Planning New WorkTodd Eldridge, P.E.Prime Engineering, Inc.

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S AGENDA Day 212th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S

Page 8: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide8

API 653 ABOVEGROUND STORAGE TANK INSPECTIONS

▶ Engineering▶ Tank Management▶ Fitness for Service▶ RBI Evaluations

Reno, PA: (814) 676-3663 Bakers�eld, CA: (661) 363-5453

MISSION STATEMENT“It is the mission of DJA Inspection Services, Inc to safely provide full service tank inspections to the storage tank industry, to be known for safety as well as for quality and detailed inspections through the dedication and experience of our team and to provide the service worldwide as well as to the individual tank owner.”

▶ Seal Inspections▶ Dye Penetrate Testing of Floating Roofs▶ SPCC Plans▶ STI Tank Inspections▶ Helium Leak Testing

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S

Page 9: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide 9

Day 3 aGENDa Thursday, March 4, 2010

Ground ImprovementMarty Taube, DGI-Menard, Inc.

Internal Tank Upgrade Case StudiesJan Bremert, Tankbau

Tank Gauging & VentingBrent Mullen, The Fluid Equipment Group

Automation for Better Tank ManagementMike Crabbe, TEC Serv LLC

Analysis of Repairs and Defects on Atmospheric Storage Tanks Using FEA and Fracture Mechanics Devon Brendecke, Quest Integrity Group

Diesel Fuel Optimization Jon Hartman, Algae-X

Unmanned Tank CleaningCarlos Legoretta, Oreco

New Sensor Technology for Floating RoofsJohn Lieb, Tank Industry Consultants

Rawmat HDB Prehydrated Bentonite Membrane SystemSteve Flynn, Rawell Environmental

The New Leak Detection Option for FloridaArthur Bosshart, Tampa Electric Company

The UK Experience of FAME Driven Microbiological Growth in Fuel Storage SystemsEd Wheeler, Eurotank

SESSIOn 1 SESSIOn 2

8:00 A.M.

8:45 A.M.

9:30 A.M.

10:15 A.M.

10:30 A.M.

11:00 A.M.

11:30 A.M.

12:00 P.M.

WELCOME RECEPTIONMarch 1, 2010 at 8:30pm

Participate in this annual event where everyone in the industry has the opportunity to network and meet new contacts. This Welcome Reception is a great start leading to the upcoming conference and tradeshow.

Come and enjoy the company, food and drinks!Sponsored by: TKDA and Vista Leak Detection, Inc.

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S AGENDA Day 3

Mid-Morning Break Sponsored by Rosen Inspection Technologies, Inc.

Adjourn Audio & Visual Sponsored by Rosen Inspection Technologies, Inc.

Page 10: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide10

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S

Liquid flat bottom tanksFloating roof tanks ReservoirsOpen top tanksStandpipesDry bulk hopper tanks

ATEC Specialties include:

Check out our affiliate at www.tarsco.com!

ATEC Steel is an industry leader in field-weld tank construction an specialty steel fabrication. Our facility offers precision fabrication, utilizing the latest state-of-the-art equipment. We provide fabrication that meets the stringent requirements of API, AWWA, ASME, AISC and other specified codes.

DigestorsUmbrella roof tanksSloped / shovel bottom tanksFoundation installationField applied coating applications

In todays’s market, ATEC Steel commands some significant advantages over other suppliers:

Flat bottom storage up to 600,000 barrels / 25,000,000 gallonsHopper bottom capacities up to 250,000 cubic feetIn-house specialized coating applications Precision manufacturing tolerancesUnmatched fabrication quality - QA System certifiedModular construction - minimized large piece countCompany profile - the experienced TEAM in field-weld componentsPrompt quotations tailored for your applicationReliable performance on every projectOn-time delivery & project completionDirect factory field installation crewsGenuine customer service

Liquid flat bottom tanksFloating roof tanks ReservoirsOpen top tanksStandpipesDry bulk hopper tanks

ATEC Specialties include:

Check out our affiliate at www.tarsco.com!

ATEC Steel is an industry leader in field-weld tank construction an specialty steel fabrication. Our facility offers precision fabrication, utilizing the latest state-of-the-art equipment. We provide fabrication that meets the stringent requirements of API, AWWA, ASME, AISC and other specified codes.

DigestorsUmbrella roof tanksSloped / shovel bottom tanksFoundation installationField applied coating applications

In todays’s market, ATEC Steel commands some significant advantages over other suppliers:

Flat bottom storage up to 600,000 barrels / 25,000,000 gallonsHopper bottom capacities up to 250,000 cubic feetIn-house specialized coating applications Precision manufacturing tolerancesUnmatched fabrication quality - QA System certifiedModular construction - minimized large piece countCompany profile - the experienced TEAM in field-weld componentsPrompt quotations tailored for your applicationReliable performance on every projectOn-time delivery & project completionDirect factory field installation crewsGenuine customer service

NISTM’s special classes

EPA SPCC CLASSOn March 1, 2010, from 8am to 12pm, the U.S.

EPA Office of Emergency Management is provid-ing training for the new SPCC requirements at the Rosen Shingle Creek. There is no cost for anyone

attending the EPA meeting.

SHOP FABRICATED AST’S INCLUDING INTEGRITY TESTING - PRACTICAL INFO

FOR TANK OWNERS/ENGINEERSThursday, March 4th from 1:00pm to 5:00pmFriday, March 5th from 8:00am to 12:00pm & 1:00pm to 5:00pm; Saturday March 6th from

8:00am to 12:00pm & 1:00pm to 3:00pm, John Cignatta will provide the necessary information on shop fabricated AST’s that owners need to

make good decisions on fuel systems. Engineers will obtain the technical understanding and basis

needed for the design/maintenance decisions on AST’s and much more.

To sign up for this class, please see the Registration Desk. The cost is $350 per person.

Openings are still available.

Page 11: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide 11

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S FLOOR PLaN

3131 West 4th StreetChester, PA 19013-1822610.494.7200

2330 Two Notch RoadLexington, SC 29072-8996803.359.4173

3600 South Martin Street, Suite 12Cropwell, AL 35054-3918205.814.1709

www.FisherTank.com

We specialize in the design, fabrication, on-site construction, repair and

maintenance of API-650, API-620 and AWWA D-100 storage tanks.

201

315309301

417

515

613601

508

Internet Cafe Refreshment Area

Internet Cafe

Page 12: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide12

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S

Page 13: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide 13

EXHIBITOR LISTINGS12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S

a. H. BECk FoUNDaTIoN ComPaNyBooth #1155123 Blanco RoadSan Antonio, Texas 78216210.342.5261 phone210.342.4965 fax

A specialty deep foundation and ground improve-ment contractor that has been in business since 1932. A.H. Beck offers a wide variety of services to meet your tank foundation and soft ground development needs.

a. R. WaTSoNBooth #5234016 E Maryland StreetBellington, WA 98226360.734.9157 phone360.752.1779 fax

For over 25 years A.R. Watson Inc. has been a worldwide leader in lifting large aboveground stor-age tanks using airbags to allow access for tank foundation reconstruction, installation of a second-ary containment and tank relocation.

aDvaNCE TaNk & CoNSTRUCTIoNBooth #2143700 East County Road 64Wellington CO, 80549970.568.3444 phone970.568.3435 fax

Advance Tank performs API 653 tank repair and API 650 new tank construction throughout the lower 48 states. Please visit our website advanc-etank.com for a complete list of our services.

aLGaE-X INTERNBooth #1115400 Division DriveFort Myers, FL 33905239.690.9589 phone239.690.1195 fax

Algae-X International is a flexible, innovative and rapidly growing company in the field of fluid treat-ment. Specializing in fuel conditioning, treatment, filtration and Emission Control Technologies, “Total Fuel System Management”.

aLLENTECHBooth #5153184 Airport RoadBethlehem, PA 18017610.266.1330 phone610.266.1331 fax

ALLENTECH designs, manufactures & installs Alu-minum Internal Floating Roofs and Perimeter Seals for above ground petrochemical storage tanks and, Floating Oil Water Separator Covers for oil refiner-ies and storage terminals. www.allentech.com

aLLIED ENERGyBooth #4212700 Ishkooda-WenonahBirmingham, AL 35211205.925.3994 phone205.925.3555 fax

Allied operates a state of the art petroleum reclama-tion facility which includes a high temperature dryer and associated vapor recovery system that achieves effective and efficient petroleum product recovery.

amERICaN HEaTING ComPaNyBooth #5071200 Route 46Clifton, NJ 07013973.777.0100 phone973.777.4693 fax

The American Heating Company specializes in heating solutions for tank terminals industry as well as a variety of other applications. AHC provides engineered equipment including hot oil heaters, exchangers, tank coils, and steam generators. AHC is considered the single source for tank heating.

amERICaN TaNk & vESSEL INC.Booth #6131005 Government StreetMobile, AL 36604251.432.8265 phone251.433.3661 fax

A U.S. corporation, specializing in engineering, fabrication/erection of Storage Tanks, Pressure Ves-sels and steel structures. Over the years AT&V, Inc. has grown to incorporate capabilities around the world with a consortium of partners to help deliver a complete product line to any location you desire. (www.at-v.com)

aTEC STEEL FaBRICaTIoN aND CoNSTRUCTIoN, LLCBooth #5161000 W. 5th StreetBaxter Springs, KS 66713877.457.5352 phone620.856.5197 fax

ATEC Steel is a full service industrial contractor specializing in API 620/650 above ground storage tanks, as well as tank maintenance/repair per API 653 standards.

BakER TaNk / aLTECHBooth #302PO Box 40 / 100 Hwy 64 EastArp, TX 75750800.527.8435 phone903.859.4191 fax

Baker Tank Company/Altech - Superior Technology in the Petroleum and Chemical Industry since 1935.

BIC aLLIaNCEBooth #119P.O. Box 1086Kemah, TX 77565281.538.9996 phone Since 1984, BIC Alliance and its sister companies — IVS Investment Banking and BIC Publishing — have earned a reputation as a primary communication link for connecting buyers and suppliers in business and industry with one another.

BRoWN-mINNEaPoLIS TaNkSBooth #6108301 Broadway Blvd., SE Albuquerque, NM 87105 505.563.4800 phone505.563.4799 fax

BMT provides custom fabrication, field erection, and miscellaneous steel products specializing in storage tanks, shop and field, and structural steel fabrica-tion.

C & C WELDINGBooth #211300 West Dixie Ave Suite #6Elizabethtown, KY 42701270.234.1332 phone270.234.8442 fax

C & C Welding, Inc. specializes in API-653 Tank Inspec-tions, Repairs and Alterations. We are listed with ISNet-world and National Compliance management Service. Our welders are ASME Certified and NCCER Trained.

CaLDWELL TaNkSBooth #1014000 Tower RoadLouisville, KY 40219502.964.3361 phone502.966.8732 fax

Caldwell Tanks is a leading supplier of field-erected stor-age tanks serving the water, petroleum, chemical, power and industrial markets. Caldwell’s turnkey capabilities in-clude engineering, fabrication, construction and painting.

CaPE, INC.Booth #4162302 Parklake Dr., Suite 200Atlanta, GA 30345770.908.7200 phone770.908.7219 fax

CAPE has 22 years of experience providing engineer-ing, construction, and operations services in four primary service areas: Environmental Remediation, Construction Services, Fuel Systems, and specialized services for the Department of Energy (DOE).

CHRomaLoXBooth #407103 Gamma DrivePittsburgh, PA 15238800.443.2640 phone412.967.5148 fax

For more than 90 years, customers have relied on Chromalox for the utmost in quality and innova-tive solutions for industrial heating applications. Chromalox manufactures the world’s largest and broadest line of electric heat and control products, including heating components, immersion heaters, circulation systems, heat transfer systems, boilers, industrial and comfort air heating, heat trace cables, sensors and precision electronic controls.

CoNSERvaTEkBooth #509498 North Loop 336 EastConroe, TX 77301936.539.1747 phone936.539.5355 fax

Conservatek designs, fabricates, and installs aluminum domes and aluminum roof structures for use on tanks of various shapes and sizes. Typical applications include petroleum storage, water stor-age, wastewater treatment basins and bulk storage enclosures in the industrial and municipal markets.

CoNSoLIDaTED FaBRICaTIoN& CoNSTRUCToRS, INC.Booth #5013851 Ellsworth StreetGary, IN 46408219.884.6150 phone219.884.6652 fax

Consolidated Fabrication & Constructors, Inc. Mechanical Contractor serving the needs of the Na-

Page 14: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide14

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank SEXHIBITOR LISTINGS

tion’s leading Petrochemical Companies. Specializing in Above Ground Storage Tank Repair, New Tank Design and Construction, Pipeline Maintenance and Systems, Refinery and Terminal Piping, and Pressure Vessels.

CooLEy ENGINEERED mEmBRaNESBooth #20950 Esten Avenue Pawtucket, RI 02860 401.724.9000 phone401.726.8799 fax

Cooley is the leading manufacturer of advanced polymer membranes for water, fuel and chemical containment including, CoolPro® reinforced poly-propylene, CoolShield® high-resistance membranes, CoolThane® urethanes and CoolGuard® fuel and chemical resistant membranes.

CoRRoSIoN CoNTRoL, INC.Booth #514494 Fairplay StreetRutledge, GA 30663706.557.9624 phone706.557.7923 fax

Corrosion Control Incorporated is a professional en-gineering and service company devoted to the field of corrosion monitoring and control. The cathodic protection related services offered include design, testing, troubleshooting, repair and installation of new systems. Our firm is registered as a Woman Owned Small Business with Central Contractor Reg-istration and with the Women’s Business Enterprise National Council.

CoRRPRo ComPaNIES, INC.Booth #620581 Sigman RoadSuite 300Conyers, GA 30013770.761.5400 phone770.761.5405 fax

For over thirty years, Corrpro has remained the leading provider of cathodic protection services for ASTS. With facilities located throughout the US, Corrpro has the ability to address your corrosion control requirements.

CoRTEC CoRPoRaTIoNBooth #2074119 White Bear ParkwaySt. Paul, MN 55110651.429.1100 phone651.429.1122 fax

Cortec Corporation (St. Paul, MN): a world leader in innovative, environmentally friendly, corrosion pro-tection VpCI and MCI Technologies for Metalwork-ing, Electronics, Water Treatment, Oil & Gas, Pack-aging, Construction, etc. Certified ISO9001/14001

CUSTom LININGSBooth #22327995 County Road 317Buena Vista, CO 81211719.395.4414 phone719.395.4416 fax

Custom Linings provides EQUIPMENT, MATERIALS, TRAINING and SERVICE for industrial coatings systems used in PRIMARY & SECONDARY STOR-AGE TANK CONTAINMENT. Custom Linings also provides waterproofing and abrasion resistance systems worldwide.

DEHUmIDIFICaTIoN TECHNoLoGIES, L.P.Booth #6216609 Avenue UHouston, TX 77011866.736.8348 phone713.939.1186 fax DHTechnologies is a rental and service company providing dehumidification, air-conditioning and heating for petro-chem industries. We have experi-ence, technology and knowledge to provide the environment necessary for all your needs.

DGI-mENaRDBooth #102275 Millers Run RoadBridgeville, PA 15017412.257.2750 phone412.257.8455 fax Menard offers economical solutions for ground improvement that can be attractive alternatives to deep foundations. Our innovative technologies and design-build experience improve ground and reduce settlement for liquid storage tanks, containment structures, platforms, buildings, roads and embank-ments. DJa INSPECTIoN SERvICESBooth #522PO Box 384Reno, PA 16343814.676.3663 phone814.676.4534 fax

DJA Inspection Services, Inc. specializes in the inspection of storage tanks in accordance with the American Petroleum Institute Standard 653. DJA is dependable, judicious, and affordable. DJA has been providing service to tank owners since 1990.

DoN mILLER & aSSoCIaTES INC.Booth #304PO Box 15947Baton Rouge, LA 70895225.275.2926 phone225.275.5112 fax

For the last two decades, Don Miller & Associates has been a leader in the petroleum maintenance and construction fields. We offer experienced and well-trained crews, state-of-the-art equipment, as well as procedures that adhere to both the latest industry standards and safety regulations. We are proud of our commitment to quality work, integrity, and dedication to the needs of you, our clients.

EaGLE-SWSBooth #117901 McClosky BlvdTampa, FL 33611813.241.0282 phone813.241.6765 fax Eagle-SWS is a full service contractor offering a variety of services including industrial cleaning, tank cleaning, plant maintenance, high pressure water washing, and liquid vacuum services.

ECo-TaNk SySTEmS, LLC.Booth #222PO Box 474Pottstown, PA 19464610.495.9583 phone610.495.5801 fax

Eco-Tank Systems LLC supplies, DEP Approved, tank monitoring systems for continues detection and containment of leakage from the tank shell, tank bottom, flanged connections and overfills.

FCC ENvIRomENTaLBooth #2171280 NE 48th StreetPompano Beach, FL 34981800.235.0189 phone954.783.6913 fax

FCC Environmental provides high-caliber industrial ser-vices for confined space entry, tank cleaning, vacuum truck services, managing used oil and oily waters, oily solid wastes, ship-to-shore transfers, and disposal of virtually all products and wastes stored in tanks.

FHG, INC.Booth #2066809 Orchard Ridge DriveP.O. Box 23030Charlotte, NC 28227704.567.1848 phone704.567.9548 fax

FHG, Inc. specializing in downstream terminal piping construction and storage tank maintenance and repairs. Loading racks, lane upgrades, blend systems, shipping & receipt piping; tank cleaning, repairs, coatings, seals, IFR installations.

FISHER TaNk ComPaNyBooth #2033131 West 4th StreetChester, PA 19013610.494.7200 phone610.485.0157 fax

Since 1948, Fisher Tank Company has been construct-ing, repairing and modifying above ground carbon and stainless steel bulk storage tanks for Chemical and Petroleum Terminals throughout the United States.

HaNSa CoNSULT oF N.a. LLC.Booth #201200 International Drive, Bldg #120Portsmouth, NH 03801603.766.5890 phone603.422.8865 fax

Hansa Consult of North America (HCNA): Provides US EPA Third Party certified leak detection services for hydrant and pipeline systems at DOD and com-mercial fueling facilities worldwide. Services include automated permanent installations, point-in-time trailer or “suitcase” testing.

HayWaRD BakER, INC.Booth #3212300 W Sample RoadSuite #102Pompano Beach, FL 33073954.977.8117 phone954.977.8121 fax

Hayward Baker is North America’s largest geotech-nical construction contractor, providing settlement control for new tanks, and settlement correction

Page 15: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide 15

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S EXHIBITOR LISTINGS12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S

for existing tanks. Ranked #1 Specialty Foundation Contractor by ENR, 2007.

HCR HaNDEX CoNSULTING & REmEDIaTIoN, LLC.Booth #21030941 Suneagle DriveMount Dora, FL 32757352.735.1800 phone352.735.5990 fax

HCR, LLC is a full service 40 year old environmental consulting, construction, dewatering, and remedia-tion company that self performs the services we provide from our offices in Florida and New Jersey.

HmT INC.Booth #30124 Waterway Ave, Suite 400The Woodlands, TX 77380281.681.7000 phone281.419.7689 fax

HMT is a worldwide specialty contractor celebrating over 30 years in the aboveground storage tank busi-ness. HMT provides a complete suite of products and services to all phases of the aboveground stor-age tank marketplace.

INDUSTRIaL HEaTERBooth #4158400 Wolf Lake DriveSuite 116Barlett, TN 38133901.382.4761 phone901.382.4766 fax

Industrial Heater distributes and installs fully supervised, 4-wire, longline, liquid-phase leak detec-tion systems. Product-specific sensors for fuels, hydrocarbon chemicals, and aqueous chemicals. Backside wireless & hardwired communications in MODBUS, METASYS, ETHERNET.

INDUSTRIaL maINTENaNCE GRoUP, INC.Booth #315235 W Brandon BlvdSuite 242Brandon, FL 33510813.659.3512 phone813.659.3265 fax

IMG provides innovative industry solutions to secondary containment coatings with electronic leak and spill notification. IMG can provide pipeline repair systems, leak detection, project management and complete site demolition

INSULTHERm, INC.Booth #316701 S 16th StreetPO Box 311LaPorte, TX 77572281.470.8442 phone281.470.2042 fax

Tufseam Tank InsulationInsultherm’s Tufseam Panel System covers a wide range of temperatures; from minus 50 degrees Fahr-enheit on ammonia tanks to 900 degrees Fahrenheit on coke drums and other vessels.

INTERNaTIoNaL TaNk SERvICE, INC.Booth #3101085 S Metcalf StreetLima, OH 45804419.223.8251 phone419.227.4590 fax

International Tank Service, Inc. designs, fabricates and erects API 650 aboveground storage tanks throughout the U.S.. Other services include com-plete storage tank modification and retrofit. Fourth generation family business. Established 1977.

J.J. WHITE, INC.Booth #4235500 Bingham StreetPhiladelphia, PA 19120 215.722.1000 phone215.722.1253 fax

Celebrating 90 Years in Construction! Count on JJ White for single-source excellence in construction, maintenance, & repair of aboveground tanks for various applications: refining, chemicals, petro-chemicals, product storage, water & wastewater tanks, & more. We offer both construction of new tanks and the full gamut of repairs, modifications, & upgrades to existing tanks.

JoHN ZINk ComPaNyBooth #61911920 E ApacheTulsa, OK 74116918.234.2918 phone918.234.1968 fax

The John Zink Company is a worldwide supplier of vapor control equipment for evaporative hydrocar-bon emissions from storage and transportation vessel loading and degassing operations, with over 2,000 vapor recovery and vapor combustion systems installed.

JoRDaN TECHNoLoGIES, INC.Booth #1002820 S English Station RoadLouisville, KY 40299502.267.8344 phone502.267.8379 fax

An International Company offering a full range of new and used Vapor Control Equipment along with Portable Combustion Equipment used for terminal operations support and tank de-gassing.

kELLEy CoNSTRUCTIoNBooth #4093560 Bashford AveLouisville, KY 40218502.239.2848 phone502.239.6820 fax

Kelley Construction Inc. covers virtually all civil as-pects of liquid storage foundations and containment -- from new terminal development to tank mainte-nance and regulation upgrades.

LEmIS USa, INC.Booth #3062121 Golden Road, Suite 2AThe Woodlands, TX77380281.465.8441 phone281.465.8224 fax

LEMIS offers a large range of Density, Viscosity, Level Gauge measuring equipment for on-line,

in-line, in-tank and other process applications for pe-troleum, petrochemical, environmental and marine industries.

LIGHTNING ELImINaToRSBooth #2196687 Arapahoe Rd.Boulder, CO 80303303.447.2828 phone303.447.8122 fax

Lightning Eliminators & Consultants, Inc. (LEC) provides comprehensive, value-driven solutions for lightning protection. We can protect anything from your computer to your storage tank farm. We profes-sionally install, inspect, and certify our lightning protection systems.

maRSEaLBooth #309Blair Rubber/MRC CO5020 Panther ParkwaySeville, OH 44273Blair; 800.321.5583 MRC; 888.276.1400 phone Blair; 330.769.9334 MRC; 330.769.4153 fax

Blair Rubber makes natural and synthetic rubber for lining tanks, rail cars, tanker trucks, etc.MRC makes Marseal® secondary containment sheet linings that will not crack like liquid-applied coatings.

maSS TECHNoLoGy CoRPoRaTIoNBooth #622PO Box 1578Kilgore, TX 75663903.986.3564 phone903.984.9569 fax

Mass Technology Corporation is the leading pro-vider of precision storage tank leak measurement. Our mass measurement system is applicable to all types and sizes of tanks and viscous products.

maTCoRBooth #10320302 Park Row Drive, Suite 100Katy, TX 77449281-558-2600 phone281-558-2608 fax Established in 1975, MATCOR is one of the most ex-perienced providers of corrosion technology. We pro-vide comprehensive design and engineering services and total cathodic protection solutions worldwide. We offer a full array of materials, installation, test-ing, maintenance and total project management.

maTRIX SERvICE ComPaNyBooth #4175100 E Skelly DriveSuite 700Tulsa, OK 74135918.838.8822 phone918.838.0782 cell

Providing Engineering, Procurement, Fabrication, and Construction services to the petroleum, termi-nal, and pipeline industries. Includes construction, repair, and maintenance of aboveground storage tanks in accordance with API standards.

Page 16: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide16

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank SEXHIBITOR LISTINGS

mESa RUBBER ComPaNyBooth #5089202 Meadow Vista Houston, TX 77064281.469.8098 phone281.469.9524 fax

Since 1967, Mesa has manufactured flexible roof drain systems, skimmers, foam delivery systems, floating roof seal systems, gauge pole covers, roof leg socks, repair bladders, vapor bladders and other specialty products for aboveground storage tanks.

mFE ENTERPRISES, INC.Booth #60726550 Ranch Road 12, Unit 5Dripping Springs, TX 78620281.441.8284 phone281.441.8361 fax

For 16 years, MFE Enterprises, Inc has manufac-tured quality MFE Tank Floor Scanners. Stop by the booth to see our latest models, including a MFE PipeScanner and Stop On Defect Scanner.

mISTRaS SERvICES DIvISIoNBooth #608195 Clarksville RoadPrinceton Junction, NJ 08550609.716.4150 phone609.716.4145 fax

MISTRAS offers a wide array of nondestructive inspection services including comprehensive tank testing programs adhering to API-653 in and out of service inspections guidelines and customized non-intrusive tank inspection programs.

mIX BRoTHERS TaNk SERvICEBooth #215PO Box 106Norco, LA 70079985.764.3300 phone985.764.2001 fax

MTS specializes in bulk storage tank Lifting, Level-ing, Re-foundationing, Re-location and Underfloor grouting. Industry leading technology and 30+ years experience with excellent Customer Satisfac-tion reviews. www.howtolifttanks.com

moDERN WELDING ComPaNy oF FLoRIDaBooth #2021801 Atlantic AveOrlando, FL 32806407.843.1270 phone407.423.8187 fax

Modern Welding fabricates all types of storage tank products for your needs from petroleum to water, aboveground to underground. We are a US Com-pany with 76 years of experience in fabrication.

moTT-SmITH CoNSULTING GRoUPBooth #2202268-2 Wednesday StreetTallahassee, FL 32308850.391.9835 phone850.692.3715 fax

The Mott-Smith Consulting Group has extensive experience with underground/aboveground storage tank system management, represents Atlas Fueling Systems and the Eco-Tank Alternative Dike Field Sys-tem, and provides environmental consulting services.

mPC CoNTaINmENT INTERNaTIoNaLBooth #5214834 OakleyChicago, IL 60609800.621.0416 phone773.650.6028 fax

MPC designs, manufactures, and installs primary and secondary containment systems featuring state-of-the-art materials. We have served as a resource for engineers, contractors, and other specifiers worldwide since 1976

mULTITHERm LLCBooth #3223223 Phoenixville Pike, Suite BMalvern, PA 19355610.408.8361 phone610.408.8365 fax Manufacturer of non-toxic & non-hazardous heat trans-fer fluids/hot oils for temperatures up to 620F, excellent for electric or gas heaters. Support includes trouble-shooting and a fluid analysis program. mUNTERS CoRPoRaTIoNBooth # 1089420 Delegates Dr. Ste. 500Orlando, FL 32837800.MUNTERS phone407.854.9015 fax

Munters is a global leader in energy efficient air treatment solutions and restoration services based on expertise in humidity and climate control tech-nologies.

maTCoRBooth #10320302 Park Row Drive, Suite 100Katy, TX 77449281-558-2600 phone281-558-2608 fax Established in 1975, MATCOR is one of the most experienced providers of corrosion technology. We provide comprehensive design and engineering services and total cathodic protection solutions worldwide. We offer a full array of materials, installation, testing, maintenance and total project management.

omNTEC mFG. INC.Booth #5041993 Pond RoadRonkonroma, NY 11779631.981.2001 phone631.981.2007 fax

OMNTEC are the industry’s premier tank monitor-ing experts. We offer overfill protection, inventory monitoring, leak detection and pipeline interface detection. We offer both wired and patented, reliable wireless solutions for all your storage tank monitoring application

PCa ENGINEERING, INC.Booth #31857 Cannonball Road Pompton Lakes, NJ 07442732.275.9125 phone732.275.9126 fax

PCA Engineering, Inc is a full service cathodic protection firm. We have been protecting our clients assets for nearly 50 years. Additionally, we have certified inspectors to meet all of your API

inspection needs, These include API 510, 570 & 653 standards. Contact us to see how we can help meet all of your compliance needs.

PETRo TECHNIk LTD.Booth #61180 BroadwayCresskill ,NJ 07626201.871.7300 phone201.871.2222 fax

PetroTechnik Inc supplies an innovative lined poly-ethylene piping system (UPP and Rheomax) up to 16” diameter, specifically designed for oil and fuel applications with ratings up to 300 psi.

PETRoCHEm INSPECTIoN SERvICES, INC.Booth #2051475 E Sam Houston Pkwy S, Suite 100Pasadena, TX 77053281.884.5100 phone281.884.5199 fax

PetroChem Inspection Services, Inc. provides a com-plete array of Tank Inspection Services to include API 653, MFL, Tank Calibration, Helium Testing, and much more. Please visit our booth for more information.

PHoENIX PRoDUCTSBooth #6021727 Bennett StreetJacksonville, FL 32206904.354.1858 phone904.354.7929 fax

Phoenix Products manufactures UL listed aboveg-round fuel storage tanks including double-walled and vaulted tanks to 30,000 gallon capacity and generator sub-base tanks to 13,500 gallon capacity.

PIPE PRoDUCTSBooth #60533 Inverness CtHiram, GA 30141678.300.5814 phone513.881.7855 fax

Pipe Products is a master distributor of FMC Tech-nologies Smith Meter® equipment serving the liquid terminal industry and offers flexible solutions provid-ing turn-key capabilities from design to installation.

PLS CoNSTRUCTIoN, INC.Booth #5033828 W Davis #308-456Conroe, TX 77304936.494.2001 phone936.494.2004 fax

Installer of geomembrane liners for primary and secondary containment. PLS also provides inspec-tions of installed geo membranes. All type geomem-branes, HDPE, XR-5, Polyurethane, Bentomat and Claymax. Design assistance and site inspections.

PoND aND ComPaNyBooth #6013500 Parkway LaneSuite 600Norcross, GA 30092678.336.7740 phone678.336.7744 fax

Pond & Company is a full-service architecture and engineering consulting firm providing comprehensive

Page 17: 12th Annual International Conference on Aboveground Storage Tanks

NISTM’s 2010 Conference and Trade Show Guide 17

12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S EXHIBITOR LISTINGS12th AnnuAl Intern atIon al C onferenCe on aboveground S t orage tank S

architecture, engine eering, planning and construction management services to government, corporate and private sector clients throughout the U.S. and globally.

PPm CoNSULTaNTS, INC.Booth #3172508 Ticheli RoadMonroe, LA 71202318.323.7270 phone318.323.6593 fax

PPM is an environmental and engineering consulting firm, achieving steady growth by providing common sense and cost-effective solutions to environmental problems along with a high quality work product.

PRaXaIR SERvICES, INC.Booth #6173755 North Business Center Drive Tucson, AZ 85705 800.394.9929 phone520.293.1306 fax

Praxair Services provides asset integrity services that include Seeper Trace (SM) pipeline assessment, Tracer Tight(R) leak detection and Guided Wave ultrasonic inspection. Praxair offers one of the most sensitive leak detection services available and does so with no disruption in service.

PRImE ENGINEERING, INC.Booth #2081888 Emery Street NWSuite 300Atlanta, GA 30318404.425.7100 phone404.425.7101 fax

Since its inception in 1990, Prime Engineering, Inc. has been providing award-winning infrastructure so-lutions and support services to the petroleum indus-try. We offer fully integrated planning, engineering, architecture, surveying, and construction services. What is your Prime Goal? Prime-Eng.com

PS ENERGy GRoUP, INC.Booth #5182987 Clairmont Road#500Atlanta, GA 30329404.321.5711 phone404.321.3938 fax

PS Energy has combined its nearly 25 years of Fuel Management expertise with Wireless Technologies to create Remote Monitoring solutions that provide real time, cost-effective management tools. PS Energy’s web portal, combined with its Wireless En-terprise Solution provides anytime, anywhere fueling data access to its clients.

QUEST INTEGRITy GRoUPBooth #1051004 Central Avenue SouthKent, Washington 98032253.893.7070 phone253.893.7075 fax

Quest Integrity Group provides highly accurate, technology-enabled inspection and assessment solu-tions that help companies in the process, pipeline and power industries increase profitability, reduce operational and safety risks and improve opera-tional planning.

RaWELL ENvIRomENTaL LTDBooth #418Carr Lane, Hoylake, Wirral, Merseyside, CH47 4AZ United Kingdom+44.151.632.5771 phone+44.151.632.0252 fax

Rawmat HDB is a prehydrated bentonite secondary containment membrane for tank farm bund floors and under tank bases. The material manufactured in the UK by Rawell environmental has numerous cost and performance advantaged over other systems.

RoSEN INSPECTIoN TECHNoLoGIESBooth #20014120 Interdrive EastHouston, TX 77032281.442.8282 phone281.442.8866 fax

Our Plant and Facility Inspection Services include a wide range of sophisticated, reliable, and accurate inspection equipment for coiled tubing, storage tanks, product lines, flow lines and other above ground pipelines.

SaNBoRN RooFS, INC.Booth #319801 - 25 AvenueNisku, Alberta Canada T9E 5H4866.955.8761 phone780.955.8781 fax

Sandborn Roofs Inc. is a the manufacturer of our patented full contact internal floating roof system used to reduce the loss of stored hydrocarbon prod-ucts as a result of evaporation.

SayBoLT LPBooth #4221026 W. Elizabeth Ave. Linden NJ, 07036908.523.2000 East Coast713.477.8171 Gulf Coast310.518.4400 West Coast908.474.1504 fax

Saybolt Calibration supplies graduated volumetric description of storage tanks (above and below ground), barges, tugs, trucks and other liquid con-tainers. Additional services include assessment of tank verticality, roundness and settlement.

SCULLy SIGNaL ComPaNyBooth #21870 Industrial WayWilmington MA 01887800.272.8559 phone617.692.8620 fax

Scully Signal Company, an engineering and manu-facturing company established in 1936, is a brand name in the transporation and storage of petroleum and liquid chemicals. Our core Systems include: Overfill Prevention, Retained Product Monitoring, Vehicle Grounding and Verification, Level Alert No-tificaton and Vehicle to Terminal Communications.

SEamaN CoRP.Booth #401442 S Main StreetSuite 2Davidson, NC 28036704.987.0055 phone704.987.0140 fax

Seaman Corporation manufactures all types of fuel-resistant reinforced geomembranes which are used in both primary and secondary containment applications. Products include XR-5 which is for all types of non-aromatic hydrocarbons (jet fuel, diesel fuel, kerosene, fuel oil, crude) and Polyurethanes which are used to contain aromatic hydrocarbons such as unleaded gasoline.

Sky CLImBERBooth #1091800 Pittsburge Dr.Delaware, OH 43015800.255.4629 phone740.203.3936 fax Sky Climber®, headquartered in Delaware, Ohio, is the industry leader in designing, manufacturing and distributing suspended access systems used in in-dustrial/commercial construction and maintenance applications.

SmITH TaNk STEELBooth #320P.O. Box 2370Gonzales, LA 70737-2370225.644.8747 phone225.644.1519 fax Smith Tank & Steel designs, engineers, shop fab-ricate and field erect API, AWWA, above ground storage tanks. We also do tank maintenance, tank repair, tank modification, tank demolition, floating roofs, IFR seals, cathodic protection, foundations, secondary containment, and coatings.

SoLIDIFICaTIoN PRoDUCTS INTERNaTIoNaL INC.Booth #411PO Box 35Northford, CT 06472203.484.9494 phone203.484.9492 fax

Solidification Products International’s patented products Petro-Plug®, Petro-Pipe®, and Petro-Bar-riers™ are passive systems allowing water to drain oil containment areas, while totally sealing in oil contact from spill.

SUPERIoR INDUSTRaL maINT. Co.Booth #405PO Box 940Harrisburg, NC 28075704.795.0001 phone704.795.0008 fax

One of the nation’s leading full service industrial contractors providing: Painting, Lead Abatement, Tank Linings, Cleaning, Turnkey Tank/Terminal Maintenance/Repair, Baked Linings, Sandblasting, Secondary Containment Coatings/Linings, Concrete Coatings, and FRP Linings.

TamPa TaNk, INC.Booth #4032710 5th Ave.Tampa, FL 33605813.623.2675 phone813.626.1641 fax

Tampa Tank, Inc. product line includes both shop assembled, field erected tanks and all custom plate fabrication in the US, the Caribbean, Central and South America.