Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Page 1
1.25” Rectilinear Downlight
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
MICRO DOWNLIGHT PERFORMANCE DATA
2 CELL 4 CELL 6 CELL 8 CELL 8W 13W 21W 27WColor Rendering Index 80+ 90+ 80+ 90+ 80+ 90+ 80+ 90+Source Lumens: 750 625 1475 1250 2200 1850 2900 2425 White Bevel Performance: Lumens Per Watt 68 57 76 64 72 61 72 61Delivered Lumens: 500 425 1000 825 1475 1250 1925 1625Black Bevel Performance: Lumens Per Watt 56 47 62 52 60 50 60 50Delivered Lumens: 400 350 825 700 1225 1025 1600 1350Color Consistency 2-Step MacAdam Ellipse*Performance data based on 3000K, 30° optic.
DELIVERED*PERFORMANCE:
Color Rendering Index:
Multiplier for Lumen
CORRELATED COLOR TEMPERATURE MULTIPLIER
Classic White
2700K 3000K 3500K 4000K
80+ 90+ 80+ 90+ 80+ 90+ 80+ 90+
0.93 0.79 1.00 0.84 1.00 0.84 1.07 0.93
Classic White
Micro™ for WoodWorks® - Vertical Slats - MDG-VS
© 2020. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 9,671,091.
Patents pending. USAI, Micro and Classic White are registered trademarks of USAI, LLC.
Armstrong®, the Armstrong logo, BioAcoustic™, and WoodWorks® are trademarks of AWI Licensing LLC.
Revised 08/04/2020
FOR USE WITH THESE WOODWORKS® CEILINGS
WoodWorks® Grille 7091BD 7093BD 7094BO 7095BO 709 6BD 7097BO 7098BD 7099BD
WoodWorks® Grille Tegular 662912 663112
Specify fi xture part number. (All boxes must be fi lled in to correctly order)
HOW TO SPECIFY
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
© 2020. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 9,671,091.
Patents pending. USAI, Micro and Classic White are registered trademarks of USAI, LLC.
Armstrong®, the Armstrong logo, BioAcoustic™, and WoodWorks® are trademarks of AWI Licensing LLC.
Revised 08/04/2020Revised 06/30/2020
1.25” Rectilinear Downlight with Integral DriverMicro™ for WoodWorks® - Vertical Slats - MDG-VS
120V
MDG__ __
FAMILY LED COLOR CHOICES FIXTURE
NCVS
Housing
NCVSNew Construction Housing forWoodWorks®
VerticalSlats
Bevel FinishOptions
WH WhiteMatte
BLBlack Matte
BG Black Specular
SMSilver Matte
SG Silver Specular
BZBronze Specular
RGRose Gold Specular
Numberof Cells
022 Cell
044 Cell
066 Cell
088 Cell
INTEGRAL DRIVER HOUSING
CollarFinish
BL BlackMatte (provided standard)
WHWhite Matte
Classic White Light
MicroDownlightGrid-Mount
MDGMicroDownlightGrid-Mount
VoltageOptions
UNV120V-277V
BeamOptions
3535° Beam
5050° Beam
Dimming Driver Options
For use with UniversalVoltage 120V - 277V
No Additional ChargeD6E EldoLED 0-10V, 1% (provided standard)
D6F EldoLED 0-10V, 1%
D2 Thomas Research 0-10V, 10%(3)
D4H Lutron H Eco, 1%Fade (2)
D7EEldoLEDDALI, 1%
D8E EldoLED DMX, 1%
For use with 120V only
No Additional Charge
D19 HatchPhase 2-wire1% (2)
D3 Lutron HiLume 2-wire, 1%
CeilingType
GL917091BD WoodWorks®
Grille (1)
GL937093BD WoodWorks®
Grille
GL947094BO WoodWorks® Grille
GL957095BO WoodWorks® Grille
GL967096BDWoodWorks® Grille
GL977097BO WoodWorks® Grille
GL987098BDWoodWorks® Grille
GL997099BDWoodWorks®
Grille
GT29662912 WoodWorks® Grille Tegular(1)
GT31663112WoodWorks® Grille Tegular
Size / WattageOptions
08H18W LED
13H113W LED
21H121W LED
27H127W LED
LED ColorTemperatureOptions
27KS2700K, 80+ CRI
27KH2700K, 90+ CRI
30KS 3000K, 80+ CRI
30KH3000K, 90+ CRI
35KS 3500K, 80+ CRI
35KH3500K, 90+ CRI
40KS 4000K, 80+ CRI
40KH4000K, 90+ CRI
2-Step MacAdamEllipse Color Consistency is standard for all
Grid MountingBars
UA2Universal Grid Mount channel bar, extendable 16” – 24” (provided standardwith all GL ceiling type options)
UA4Universal Grid Mount channel bar, extendable 30” – 48” (optional for all GL ceiling type options)
TA2Tegular Grid Mount channel bar, extendable 16” – 24” (provided standard with GT29 ceiling type option)
TA4Tegular Grid Mount channel bar, extendable 30” – 48” (provided standardwith GT31 ceiling type option)
Page 2
1 Not available with MDG06 or MDG08; use with MDG02 or MDG04 only2 Not available with MDG02 8W LED 3 Not available with MDG08 27W LED
Downlight Accessory Kit
Replacement Spacer Bracket and Yoke Kits for Compatible WoodWorks® Vertical Slat Ceilings
MDG-BYKIT-GL91 installs with Grille 7091MDG-BYKIT-GL93 installs with Grille 7093MDG-BYKIT-GL94 installs with Grille 7094MDG-BYKIT-GL95 installs with Grille 7095MDG-BYKIT-GL96 installs with Grille 7096MDG-BYKIT-GL97 installs with Grille 7097MDG-BYKIT-GL98 installs with Grille 7098MDG-BYKIT-GL99 installs with Grille 7099MDG-BYKIT-GL set of spacer bracket and yoke for all Grille types, one each – 8 totalMDG-BYKIT-GT29 installs with Grille Tegular 662912MDG-BYKIT-GT31 installs with Grille Tegular 663112MDG-BYKIT-GT set of spacer bracket and yoke for both Grille Tegular types, one each – 2 total
Collar Finish
HOW TO SPECIFY
Page 3
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
1. Specify fi xture part number. (All boxes must be fi lled in to correctly order)
USAI Power Supply
Must Be Specifi ed
© 2020. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 9,671,091.
Patents pending. USAI, Micro and Classic White are registered trademarks of USAI, LLC.
Armstrong®, the Armstrong logo, BioAcoustic™, and WoodWorks® are trademarks of AWI Licensing LLC.
Revised 08/04/2020
1.25” Rectilinear Downlight with Remote DriverMicro™ for WoodWorks® - Vertical Slats - MDG-VS
MDG__ __
FAMILY LED COLOR CHOICES FIXTURE
RMVS
Housing
RMVSRemote DriverHousing forWoodWorks® VerticalSlats
Bevel FinishOptions
WH WhiteMatte
BLBlack Matte
BG Black Specular
SMSilver Matte
SG Silver Specular
BZBronze Specular
RGRose Gold Specular
Numberof Cells
022 Cell
044 Cell
066 Cell
088 Cell
REMOTE DRIVER HOUSING
CollarFinish
BL BlackMatte (provided standard)
WHWhite Matte
Classic White Light
MicroDownlightGrid-Mount
MDGMicroDownlightGrid-Mount
BeamOptions
3535° Beam
5050° Beam
CeilingType *
GL917091BDWoodWorks® Grille (1)
GL937093BD WoodWorks® Grille
GL947094BO WoodWorks® Grille
GL957095BO WoodWorks® Grille
GL967096BD WoodWorks® Grille
GL977097BOWoodWorks® Grille
GL987098BD WoodWorks® Grille
GL997099BDWoodWorks® Grille
GT29662912 WoodWorks Grille Tegular (1)
GT31663112Woodworks® Grille Tegular
Size / WattageOptions
08H18W LED
13H113W LED
21H121W LED
27H127W LED
LED ColorTemperatureOptions
27KS2700K, 80+ CRI
27KH2700K, 90+ CRI
30KS 3000K, 80+ CRI
30KH3000K, 90+ CRI
35KS 3500K, 80+ CRI
35KH3500K, 90+ CRI
40KS 4000K, 80+ CRI
40KH4000K, 90+ CRI
2-Step MacAdamEllipse Color Consistency is standard for all
Grid MountingBars
UA2Universal Grid Mount channel bar, extendable 16” – 24” (provided standard with all GL ceiling type options)
UA4Universal Grid Mount channel bar, extendable 30” – 48” (optional for all GL ceiling type options)
TA2Tegular Grid Mount channel bar, extendable 16” – 24” (provided standard with GT29 ceiling type option)
TA4Tegular Grid Mount channel bar, extendable 30” – 48” (provided standard with GT31 ceiling type option)
2. Specify Remote Power Supply
120V
RPAMicroRemote Power Supply
RPA
D2 0-10V dim, 10% D4H Lutron H ECO, 1% Fade (2) D6E EldoLED 0-10V, 1% D6F EldoLED 0-10V, 1%
D3 Lutron 2-wire, 1% D19 Phase 2-wire, 1% (2)2 Not available with LED 08H1
08H1 2 Cell 8W LED13H1 4 Cell 13W LED21H1 6 Cell 21W LED27H1 8 Cell 27W LED
08 Fixtures Max
03 Fixtures Max
02 Fixtures
01 Fixture
SINGLE CHANNEL REMOTE POWER SUPPLIES
D6E EldoLED 0-10V, 1% D6F EldoLED 0-10V, 1% D7E EldoLED DALI, 1% D8E EldoLED DMX, 1%
MULTI CHANNEL REMOTE POWER SUPPLIES
TypeCode
Remote Dimming Driver Typeand Dim Level
VoltageFixture Size andWattage Options
Fixture Quantity per Remote Power Supply
04 Fixtures MaxUNV120V - 277V
UNV120V - 277V
08H1 2 Cell 8W LED08H1 2 Cell 8W LED13H1 4 Cell 13W LED21H1 6 Cell 21W LED27H1 8 Cell 27W LED
Specify remote power supply part number in table below
Remote EmergencyOption
EM7Emergency Batteryprovides emergency power to one fi xture per power supply andrequires remote enclosure (by others) with a minimum size of14.5” L x 6.5” Wx 3” H.Emergency batteryis not available with2 cellMDG02-08H1 LED
1 Not available with MDG06 or MDG08; use with MDG02 or MDG04 only
Collar Finish
* For Ceiling Type changes in fi eld, see
Downlight Accessory Kit ordering table on Page 2
Page 4
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
INTEGRAL DRIVER HOUSING OPTIONS
© 2020. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 9,671,091.
Patents pending. USAI, Micro and Classic White are registered trademarks of USAI, LLC.
Armstrong®, the Armstrong logo, BioAcoustic™, and WoodWorks® are trademarks of AWI Licensing LLC.
Revised 08/04/2020
1.25” Rectilinear DownlightMicro™ for WoodWorks® - Vertical Slats - MDG-VS
13/4”
27/8”
151/4”
69/16”
69/16”
313/16”
NCVS-GT New Construction Housing Option for WoodWorks® Grille Tegular Vertical Slats
23/16”27/8”
151/4”
69/16”
69/16”
23/16”
313/16”
NCVS-GL New Construction Housing Option for WoodWorks® Grille Vertical Slats
RMVS-GL Remote Driver Housing Option for WoodWorks® Grille Vertical Slats
13/4”
21/16”
Trim
69/16”
21/16”
CL68/16”
Page 5
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
REMOTE DRIVER HOUSING OPTIONS
RMVS-GT Remote Driver Housing Option for WoodWorks® Grille Tegular Vertical Slats
© 2020. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 9,671,091.
Patents pending. USAI, Micro and Classic White are registered trademarks of USAI, LLC.
Armstrong®, the Armstrong logo, BioAcoustic™, and WoodWorks® are trademarks of AWI Licensing LLC.
Revised 08/04/2020
23/16”
21/16”
1.25” Rectilinear DownlightMicro™ for WoodWorks® - Vertical Slats - MDG-VS
Trim
69/16”
21/16”
CL69/16”
19/16”
BELOW CEILING APPEARANCE AND DIMENSIONS
Page 6
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
© 2020. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 9,671,091.
Patents pending. USAI, Micro and Classic White are registered trademarks of USAI, LLC.
Armstrong®, the Armstrong logo, BioAcoustic™, and WoodWorks® are trademarks of AWI Licensing LLC.
Revised 08/04/2020
BELOW CEILING DRAWINGS - Integration With Armstrong® WoodWorks® Ceilings
WoodWorks® Grille Vertical Slats/ Armstrong® PN: 7091BD Optional BioAcoustic™ Infi ll panel / Armstrong® PN: 6657
1.25” Rectilinear DownlightMicro™ for WoodWorks® - Vertical Slats - MDG-VS
815/16”
WoodWorks® Grille Vertical Slats / Armstrong® PN: 7093BDOptional BioAcoustic™ Infi ll panel / Armstrong® PN: 6657
USAI Micro Housing: NCVS-GL91NOTE: This ceiling solution allows for 4-cell maximum Micro (MDG02, MDG04 only)
USAI Micro Housing: NCVS-GL93
6” Typ
35/8”
33/4”
133/16”
35/8”Expandable hanger bar
Use of BioAcoustic™ infi llpanel recommended
13/4”
2 Cell: 15/16” 4 Cell (max): 29/16”
Dowels and backersmust be avoided
815/16”
6” Typ
35/8”
43/4”
133/16”
35/8”Expandable hanger bar
Use of BioAcoustic™ infi ll panel recommended
13/4”
2 Cell: 15/16” 4 Cell: 29/16”6 Cell: 313/16” 8 Cell: 51/16”
Dowels and backersmust be avoided
3-5/8” clearance required above fi nished height of ceiling tees for NCVS-GL fi xture housing installation. When RMVS-GL remote driver housing is used, 2-7/16” clearance is required above fi nished height of ceiling tee.
3-5/8” clearance required above fi nished height of ceiling teesfor NCVS-GL fi xture housing installation. When RMVS-GLremote driver housing is used, 2-7/16” clearance is required above fi nished height of ceiling tee.
BELOW CEILING APPEARANCE AND DIMENSIONS
Page 7
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
© 2020. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 9,671,091.
Patents pending. USAI, Micro and Classic White are registered trademarks of USAI, LLC.
Armstrong®, the Armstrong logo, BioAcoustic™, and WoodWorks® are trademarks of AWI Licensing LLC.
Revised 08/04/2020
BELOW CEILING DRAWINGS - Integration With Armstrong® Woodworks® Ceilings
WoodWorks® Grille Vertical Slats / Armstrong® PN: 7094BOOptional BioAcoustic™ Infi ll panel / Armstrong® PN: 6657
1.25” Rectilinear DownlightMicro™ for WoodWorks® - Vertical Slats - MDG-VS
WoodWorks® Grille Vertical Slats / Armstrong® PN: 7095BOOptional BioAcoustic™ Infi ll panel / Armstrong® PN: 6657
USAI Micro Housing: NCVS-GL94
USAI Micro Housing: NCVS-GL95
815/16”
12” Typ
35/8”
23/4”
133/16”
35/8”Expandable hanger bar
Use of BioAcoustic™ infi ll panel recommended
2”
2 Cell: 15/16” 4 Cell: 29/16”6 Cell: 313/16” 8 Cell: 51/16”
815/16”
815/16”
12” Typ
35/8”
33/4”
133/16”
35/8”Expandable hanger bar
Use of BioAcoustic™ infi ll panel recommended
2”
2 Cell: 15/16” 4 Cell: 29/16”6 Cell: 313/16” 8 Cell: 51/16”
Backers mustbe avoided
Backers must be avoided
3-5/8” clearance required above fi nished height of ceiling tees for NCVS-GL fi xture housing installation. When RMVS-GL remote driver housing is used, 2-7/16” clearance is required above fi nished height of ceiling tee.
3-5/8” clearance required above fi nished height of ceiling tees for NCVS-GL fi xture housing installation. When RMVS-GL remote driver housing is used, 2-7/16” clearance is required above fi nished height of ceiling tee.
BELOW CEILING APPEARANCE AND DIMENSIONS
Page 8
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
© 2020. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 9,671,091.
Patents pending. USAI, Micro and Classic White are registered trademarks of USAI, LLC.
Armstrong®, the Armstrong logo, BioAcoustic™, and WoodWorks® are trademarks of AWI Licensing LLC.
Revised 08/04/2020
BELOW CEILING DRAWINGS - Integration With Armstrong® WoodWorks® Ceilings
WoodWorks® Grille Vertical Slats / Armstrong® PN: 7096BD Optional BioAcoustic™ Infi ll panel / Armstrong® PN: 6657
1.25” Rectilinear DownlightMicro™ for WoodWorks® - Vertical Slats - MDG-VS
WoodWorks® Grille Vertical Slats / Armstrong® PN: 7097BOOptional BioAcoustic™ Infi ll panel / Armstrong® PN: 6657
USAI Micro Housing: NCVS-GL96
USAI Micro Housing: NCVS-GL97
815/16”
6” Typ
35/8”
43/4”
133/16”
35/8”Expandable hanger bar
Trim mounting bracket must straddle backer for 6 or 8 cell installations
Use of BioAcoustic™ infi ll panel recommended
2”
2 Cell: 15/16” 4 Cell: 29/16”6 Cell: 313/16” 8 Cell: 51/16”
Dowels and backersmust be avoided
815/16”
Use of BioAcoustic™ infi ll panel recommended
12” Typ
35/8”
33/4”
133/16”
35/8”Expandable hanger bar
23/4”
2 Cell: 15/16” 4 Cell: 29/16”6 Cell: 313/16” 8 Cell: 51/16”
Backers must be avoided
3-5/8” clearance required above fi nished height of ceiling tees for NCVS-GL fi xture housing installation. When RMVS-GL remote driver housing is used, 2-7/16” clearance is required above fi nished height of ceiling tee.
3-5/8” clearance required above fi nished height of ceiling tees for NCVS-GL fi xture housing installation. When RMVS-GL remote driver housing is used, 2-7/16” clearance is required above fi nished height of ceiling tee.
BELOW CEILING APPEARANCE AND DIMENSIONS
Page 9
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
© 2020. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 9,671,091.
Patents pending. USAI, Micro and Classic White are registered trademarks of USAI, LLC.
Armstrong®, the Armstrong logo, BioAcoustic™, and WoodWorks® are trademarks of AWI Licensing LLC.
Revised 08/04/2020
BELOW CEILING DRAWINGS - Integration With Armstrong® WoodWorks® Ceilings
WoodWorks® Grille Vertical Slats / Armstrong® PN: 7098BDOptional BioAcoustic™ Infi ll panel / Armstrong® PN: 6657
1.25” Rectilinear DownlightMicro™ for WoodWorks® - Vertical Slats - MDG-VS
WoodWorks® Grille Vertical Slats / Armstrong® PN: 7099BDOptional BioAcoustic™ Infi ll panel / Armstrong® PN: 6657
USAI Micro Housing: NCVS-GL98
USAI Micro Housing: NCVS-GL99
815/16”
6” Typ
35/8”
43/4”
133/16”
35/8”Expandable hanger bar
Use of BioAcoustic™ infi ll panel recommended
23/4”
2 Cell: 15/16” 4 Cell: 29/16”6 Cell: 313/16” 8 Cell: 51/16”
Backersand dowelsmustbe avoided
815/16”
6” Typ
35/8”
53/4”
133/16”
35/8”
Expandable hanger bar
Use of BioAcoustic™ infi ll panel recommended
23/4”
2 Cell: 15/16” 4 Cell: 29/16”6 Cell: 313/16” 8 Cell: 51/16”
Dowels and backers mustbe avoided
35/8”
3-5/8” clearance required above fi nished height of ceiling tees for NCVS-GL fi xture housing installation. When RMVS-GL remote driver housing is used, 2-7/16” clearance is required above fi nished height of ceiling tee.
3-5/8” clearance required above fi nished height of ceiling tees for NCVS-GL fi xture housing installation. When RMVS-GL remote driver housing is used, 2-7/16” clearance is required above fi nished height of ceiling tee.
BELOW CEILING APPEARANCE AND DIMENSIONS
Page 10
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
© 2020. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 9,671,091.
Patents pending. USAI, Micro and Classic White are registered trademarks of USAI, LLC.
Armstrong®, the Armstrong logo, BioAcoustic™, and WoodWorks® are trademarks of AWI Licensing LLC.
Revised 08/04/2020
BELOW CEILING DRAWINGS - Integration With Armstrong WoodWorks® Ceilings
WoodWorks® Grille Tegular Vertical Slats / Armstrong® PN: 662912Optional BioAcoustic™ Infi ll panel / Armstrong® PN: 5823
1.25” Rectilinear DownlightMicro™ for WoodWorks® - Vertical Slats - MDG-VS
WoodWorks® Grille Tegular Vertical Slats / Armstrong® PN: 663112Optional BioAcoustic™ Infi ll panel / Armstrong® PN: 5823
USAI Micro Housing: NCVS-GT29NOTE: This ceiling solution allows for 4-cell maximum Micro (MDG02, MDG04 only)
USAI Micro Housing: NCVS-GT31
151/4”
815/16”
21/2”
31/4”
133/16”
2 Cell: 15/16”4 Cell: 29/16”6 Cell: 313/16”8 Cell: 51/16”
41/8”Expandable hanger bar
Backers must be avoided
Use of BioAcoustic™ infi ll panel recommended
11/2”
815/16”
71/2” Typ
21/2”
31/4”
133/16” 2 Cell: 15/16”4 Cell: 29/16”
41/8”Expandable hanger bar
Backers must be avoided
Use of BioAcoustic™infi ll panel recommended
19/16”
4-1/8” clearance required above fi nished height of ceiling tees for NCVS-GT29 fi xture housing installation. When RMVS-GT29 remote driver housing is used, 3-7/16” clearance is required above fi nished height of ceiling tee.
4-1/8” clearance required above fi nished height of ceiling tees for NCVS-GT31 fi xture housing installation. When RMVS-GT31 remote driver housing is used, 3-7/16” clearance is required above fi nished height of ceiling tee.
MICRO FOR WOODWORKS® VERTICAL SLATS SPECIFICATIONS
Page 11
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
FIELD REPLACEABLE LED LIGHT ENGINEis serviceable through the aperture with a Phillips screwdriver. All USAI Lighting light engines feature industry-leading color consistency.
MOUNTINGUSAI Lighting Micro light fi xtures for WoodWorks® Vertical Slats are specifi cally designed for use with WoodWorks® ceilings by Armstrong Ceiling Solutions. USAI fi xture housings are provided with patent-pending spacers, trim yoke suspension and mounting bars. Mounting bars are required to install the light fi xture and are not optional. Finished installations are seismically rated. Consult local codes for independent tie-ins.
INFILL PANELBioAcoustic™ Infi ll panel accessory is optionally available from Armstrong Ceiling Solutions to complete the installation. See integration page drawings for specifi c infi ll product part number for each ceiling type. USAI Lighting provides a cutout template for each light fi xture to ensure the material is cut to the correct size to frame light fi xture aperture within ceiling panel.
FIELD REPLACEABLE INTEGRAL DRIVER Unless otherwise specifi ed, a 0-10V, 100%-1% solid state electronic constant current integral dimming driver with a high power factor is provided standard and sources 2mA. All integral dimming drivers are located within the fi xture housing and are serviceable from above the ceiling only. See installation instructions for details to access in specifi c Armstrong® WoodWorks® ceilings. Some on-time delay may be experienced depending on control system used. All dimming drivers comply with IEEE C62.41 surge protection.
REMOTE LOCATION DRIVERAll remote dimming driver options must be clearly specifi ed in the “RP” table. Remote power supplies require enclosures by others that meet local codes and must be located in an accessible service panel within 100ft of the light fi xture; see remote driver details for coordination of enclosure sizes. All dimming drivers comply with IEEE C62.41 surge protection.
REMOTE LOCATION EMERGENCY Remote emergency battery IOTA ILB-CP07 provides 200mA to one fi xture for 90 minutes. When used with multichannel power supplies, emergency battery supplies power to 1 fi xture only through channel 1. Remote power supplies with EM option require an enclosure with minimum size of 14.5”L x 6.5”W x 3”H by others that meets local codes. Battery is not available with 08H1 LED.
© 2020. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 9,671,091.
Patents pending. USAI, Micro and Classic White are registered trademarks of USAI, LLC.
Armstrong®, the Armstrong logo, BioAcoustic™, and WoodWorks® are trademarks of AWI Licensing LLC.
Revised 08/04/2020
1.25” Rectilinear DownlightMicro™ for WoodWorks® - Vertical Slats - MDG-VS
Requirements and Wiring Diagrams forMDG02 MWG02
Remote Power Supply Dimming Option Wire Gauge Required* (by others) UNV-D6E EldoLED 0-10V, 1% UNV-D6F EldoLED 0-10V, 1% UNV-D7E EldoLED DALI, 1% UNV-D8E EldoLED DMX, 1%
If you want to connect 8 fi xtures maximum per power supply select from the following options:
RPRP2REMOTEREMOTEPOWEPOWERSUPPLYSUPPLY
-
A
+
INPUT WIREINPUT WIRES
-+
USE FOR WIRING FIXTURESUSE FOR WIRING FIXTURESMDF0MDF02M2M DP02DP02MDF0MDF04M4M DP04DP04MDF0MDF06M6M DP06DP06MDF0MDF08M8M DP08DP08
FIXTURFIXTURE
SEE DIMMING COMPSEE DIMMING COMPATIBILITATIBILITYSHEET FOR SHEET FOR DETAILDETAILS
SEE DIMMING COMPSEE DIMMING COMPATIBILITATIBILITYSHEET FOR SHEET FOR DETAILDETAILS
B
USE ONLY FOR WIRING FIXTURESUSE ONLY FOR WIRING FIXTURESMDF0MDF02MDP0MDP02(2) FIXTURES IN SERIES(2) FIXTURES IN SERIES
INPUT WIREINPUT WIRES
FIXTURE FIXTURE 1
+
RPRP2REMOTEREMOTEPOWEPOWERSUPPLYSUPPLY
-+
- FIXTURE FIXTURE 2
-+
If you want to connect 1-2 fi xtures maximum per power supply select from the following options:
Remote Power Supply Dimming Option Wire Gauge Required* (by others) UNV-D2 0-10V dim, 10% 14/12 5.75” W x 2.625” L x 2” H UNV-D6E EldoLED 0-10V, 1% UNV-D6F EldoLED 0-10V, 1% 120V-D3 Lutron 2-wire phase, 1% 14/12 6.25” W x 4” L x 2” H
* Wire gauge 14/12 = Maximum distance from light fi xture to remote power supply is 100’ using 12 gauge wire, 50’ using 14 gauge wire. * Wire gauge 18/16 = Maximum distance from light fi xture to remote power supply is 100’ using 16 gauge wire, 50’ using 18 gauge wire.
SEE DIMMINGCOMPATIBILTY
SHEETS FOR DETAILS
SEE DIMMINGCOMPATIBILTY
SHEETS FOR DETAILS
HOMERUN SERIES
2-Cell Micro Remote Power Supply Requirements and Wiring Diagrams2-Cell can be wired in homeruns (wiring diagram A) or in series pairs (wiring diagram B).
18/16 10.375” W x 4” L x 2” H
18/16 6.25” W x 4” L x 2” H
RPA-08-08H1
RPA-01-08H1RPA-02-08H1
RPAREMOTEPOWERSUPPLY
RPAREMOTEPOWERSUPPLY
Minimum Enclosure Size Required
Minimum Enclosure Size Required
MICRO WOODWORKS® VERTICAL SLATS SPECIFICATIONS (continued)
Page 12
USAI LIGHTING HEADQUARTERS1126 River RoadNew Windsor, NY 12553T: 845–565–8500 F: 845–561–[email protected]
USAI LIGHTING COLLABORATORY13 Crosby StreetNew York, NY [email protected]
© 2020. USAI, LLC. All rights reserved. All designs protected by copyright. Covered by US Patents: 9,671,091.
Patents pending. USAI, Micro and Classic White are registered trademarks of USAI, LLC.
Armstrong®, the Armstrong logo, BioAcoustic™, and WoodWorks® are trademarks of AWI Licensing LLC.
Revised 08/04/2020
1.25” Rectilinear DownlightMicro™ for WoodWorks® - Vertical Slats - MDG-VS
Requirements and Wiring Diagrams for MDG04 MWG04 MDG06 MWG06 MDG08 MWG08
If you want to connect 3-4 fi xtures maximum per power supply select from the following options:
RPRP2REMOTEREMOTEPOWEPOWERSUPPLYSUPPLY
-
A
+
INPUT WIREINPUT WIRES
-+
USE FOR WIRING FIXTURESUSE FOR WIRING FIXTURESMDF0MDF02M2M DP02DP02MDF0MDF04M4M DP04DP04MDF0MDF06M6M DP06DP06MDF0MDF08M8M DP08DP08
FIXTURFIXTURE
SEE DIMMING COMPSEE DIMMING COMPATIBILITATIBILITYSHEET FOR SHEET FOR DETAILDETAILSSEE DIMMING
COMPATIBILTY SHEETS
FOR DETAILS
4, 6, and 8-Cell Micro Remote Power Supply Requirements and Wiring DiagramsMust be wired in homeruns per wiring diagram “A” below.
HOMERUN
RPAREMOTEPOWERSUPPLY
Remote Power Supply Dimming Option Wire Gauge Required* RP Only RP with EM Option** UNV-D6E EldoLED 0-10V, 1% UNV-D6F EldoLED 0-10V, 1% UNV-D7E EldoLED DALI, 1% UNV-D8E EldoLED DMX, 1%
18/16 10.375” W x 4” L x 2” H 14.5" W x 6.5" L x 3" H
Minimum Enclosure Size Required (by others)
RPA-04-13H1RPA-04-21H1RPA-03-27H1
If you want to connect 1 fi xture maximum per power supply select from the following options:
* Wire gauge 14/12 = Maximum distance from light fi xture to remote power supply is 100’ using 12 gauge wire, 50’ using 14 gauge wire. * Wire gauge 18/16 = Maximum distance from light fi xture to remote power supply is 100’ using 16 gauge wire, 50’ using 18 gauge wire. ** Emergency battery remote power supplies cannot be located any more than 50 feet from light fi xture.
Remote Power Supply Dimming Option Wire Gauge Required* RP Only RP with EM Option** UNV-D2 0-10V dim, 10% 14/12 7” W x 2.625” L x 2” H UNV-D4H Lutron H ECO, 1% Fade 14/12 6.25” W x 4” L x 2” H UNV-D6E EldoLED 0-10V, 1% UNV-D6F EldoLED 0-10V, 1% 120V-D3 Lutron 2-wire phase, 1% 14/12 6.25” W x 4” L x 2” H 120V-D19 Hatch 2-wire phase, 1% 14/12 5.75” W X 2.625” L X 2” H
18/16 6.25” W x 4” L x 2” H 14.5" W x.5" L x 3" H
Minimum Enclosure Size Required (by others)
RPA-01-13H1RPA-01-21H1RPA-01-27H1
FIXTURE WEIGHT Integral Driver housings with Trim and UA2 or TA2 mounting bars: MDG02-VS MDG04-VS MDG06-VS MDG08-VS 5.63 lbs 5.75 lbs 5.82 lbs 5.94 lbs
Remote Driver housings with Trim and UA2 or TA2 mounting bars (does not include remote power supply weight): MDG02-VS MDG04-VS MDG06-VS MDG08-VS 3.5 lbs 3.63 lbs 3.69 lbs 3.82 lbs
UA4 or TA4 mounting bars add an additional 0.5 lbs to the weights listed above.
WARRANTYBased on IESNA LM80-2008, Micro has a 50,000 hour rated life at 70% lumen maintenance (L70). USAI Lighting Warranty covers replacement parts for 5 years from date of shipment. Ambient temperatures at fi xture location should not exceed 40°C during normal operation.
LISTINGS Dry/Damp location. NRTL/CSA-US tested to UL standards. IBEW union made.
NOTES• Not for use in corrosive environment• Use of pressure washer voids warranty
PHOTOMETRICS Consult factory or website for IES fi les. Tested in accordance with IESNA LM79.