12/09/20021 Engineer Training Program Drivers & AP Installation Guide for N34BS3 Written By Suzanne Yu Uniwill Computer Intl Corp. 3358 Gateway Blvd. Fremont,

12/09/2002 1

Engineer Training ProgramEngineer Training Program

Drivers & AP Installation Guide for

N34BS3

Written By

Suzanne Yu

Uniwill Computer Int’l Corp.3358 Gateway Blvd. Fremont, CA 94538Tel: 510-580-6888Fax: 510-580-5666

12/09/2002 2

ContextContext

• Component Driver Installation

• Mini-PCI Wireless Card

• Special Function

12/09/2002 3

Component Driver InstallationComponent Driver Installation

• Preface

• Installation in Win XP

• Installation in Win 2K

• Installation in Win ME

12/09/2002 4

PrefacePreface

• Windows 98 SE– Microsoft does not support it

any more. The drivers for it are still provided, but do not be guaranteed to work properly

• Suppose Optical Drive is mapped to drive D:

• After installing OS, several unknown devices will be shown in Device Manager

12/09/2002 5

Installation in Win XPInstallation in Win XP

• Audio Driver

• Video Driver

• LAN Driver

• Modem Driver

• PCMCIA Driver

• USB 2.0 Driver

12/09/2002 6

Audio Driver Audio Driver

• Go to D:\Driver\AUDIO• Double click “SETUP” icon• Follow the instructions• After done the installation,

click “Finish”, the system will auto-restart

• After re-start, the symbol, SiS 7012 Audio Driver, should be shown in Device Manager

12/09/2002 7

Video Driver Video Driver

• Go to D:\Driver\VGA\Win2K&XP

• Double click “SETUP” icon

• Follow the instructions

• After done the installation, click “Finish”, the system will auto-restart

• After re-start, the symbol, SiS 650 Display adapters, should be shown in Device Manager

12/09/2002 8

LAN Driver LAN Driver

• Go to D:\Driver\LAN




• After re-start, the symbol, SiS 900 PCI Fast Ethernet adapter, should be shown in Device Manager

12/09/2002 9

Modem Driver Modem Driver

• Go to D:\Driver\MODEM\WINXP

• Double click “SETUP” icon, the driver will be automatically installed

• After done the installation, the symbol, Smart Link 56K Modem, should be shown in Device Manager

12/09/2002 10

PCMCIA Driver PCMCIA Driver

• Go to D:\Driver\PCMCIA



• After done the installation, click “Finish”,

• The symbol, O2Micro OZ711EC1/M1 PCMCIA adapters and SmartCardBus Reader, should be shown in Device Manager

12/09/2002 11

USB2.0 Driver USB2.0 Driver

• Go to D:\Driver\USB2.0

• Double click “USB20” icon


• After done the installation, click “Yes”, the system will auto-restart

• After re-start, the symbol, SiS 7002 USB 2.0 Enhanced Host Controller, should be shown in Device Manager

12/09/2002 12

Installation in Win 2KInstallation in Win 2K

• Audio Driver

• Video Driver

• LAN Driver

• Modem Driver

• PCMCIA Driver

• USB 2.0 Driver

12/09/2002 13


• Go to D:\Driver\AUDIO• Double click “SETUP” icon• Follow the instructions• After done the installation,

click “Finish”, the system will auto-restart

• After re-start, the symbol, SiS 7012 Audio Driver, should be shown in Device Manager

12/09/2002 14


• Go to D:\Driver\VGA\Win2K&XP




• After re-start, the symbol, SiS 650 Display adapters, should be shown in Device Manager

12/09/2002 15






• After re-start, the symbol, SiS 900 PCI Fast Ethernet adapters, should be shown in Device Manager

12/09/2002 16


• Go to D:\Driver\MODEM\WIN2K


• After done the installation, the symbol, Smart Link 56K Modem, should be shown in Device Manager

12/09/2002 17


• Go to D:\Driver\PCMCIA



• After done the installation, click “Finish Yes”, to restart the system

• After re-start, the symbol, O2Micro OZ711EC1/M1 PCMCIA adapters and SmartCardBus Reader, should be shown in Device Manager

12/09/2002 18


• Go to D:\Driver\USB2.0

• Double click “USB20” icon


• After done the installation, click “Yes”, the system will auto-restart

• After re-start, the symbol, SiS 7002 USB 2.0 Enhanced Host Controller, should be shown in Device Manager

12/09/2002 19

Installation in Win MEInstallation in Win ME

• Audio Driver

• Video Driver

• LAN Driver

• Modem Driver

• PCMCIA Driver

• USB 2.0 Driver

12/09/2002 20


• Go to D:\Driver\AUDIO




• After re-start, the symbol, SiS 7012 Audio Driver, should be shown in System Properties

12/09/2002 21


• Go to D:\Driver\VGA\Win98&ME




• After re-start, the symbol, SiS 650 Display adapters, should be shown in System Properties

12/09/2002 22






• After re-start, the symbol, SiS 900 PCI Fast Ethernet adapter, should be shown in System Properties

12/09/2002 23


• Go to D:\Driver\MODEM\WINME


• After done the installation, the symbol, Smart Link 56K Modem, should be shown in System Properties

12/09/2002 24


• Go to D:\Driver\PCMCIA\Win9xMe



• After done the installation, click “Yes” to restart the system

• After restart, following the instructions, click “Yes” to restart the system

• After restart, following the instructions, click “Yes” to restart the system

• After restart, the symbol, O2Micro OZ711EC1/M1 PCMCIA adapters and SmartCardBus Reader, should be shown in Device Manager

12/09/2002 25


• Because WinMe does not support USB 2.0, there is no Driver. Therefore, there is a unknown device in system Properties

• Support USB 1.1

12/09/2002 26

Mini-PCI Wireless CardMini-PCI Wireless Card

• Preparation

• Driver Installation

• Configuration

12/09/2002 27

PreparationPreparation

• Optional device• Gemtek WL-350F

– Support IEEE 802.11b

• Make sure the card is properly plugged into Mini-PCI socket

• Make sure two antennas are properly connected into the card

Connectors

12/09/2002 28

Driver InstallationDriver Installation

• Go to “D:\Driver\Minipci-Wirless LAN”, double click “GemtekMiniPCI version 001”

• After done the installation, click “Finish” to restart the system

• After restart, the icon IEEE 802.11 11Mbps Wireless LAN Card, should be shown in Device manager

12/09/2002 29

ConfigurationConfiguration

• After installing driver, there is a symbol on Taskbar

• Click the Symbol, the screen,“PRISM Wireless Settings”, will be popped up

• Go to “Status” to check link quality

• Go to “Configuration”, to configure the function

12/09/2002 30

Special FunctionSpecial Function

• TV-Out Function

• Dual-View Function

12/09/2002 31

TV-Out FunctionTV-Out Function

• Connecting TV and Notebook with S-Video cable

• Make sure the TV system is correctly set in BIOS settings

• Go to “ Control Panel Display Settings Advanced Utility Manager”,

• Click “Driver Mode Settings”, the screen will be popped up

12/09/2002 32

TV-Out Function(continued)TV-Out Function(continued)

• Disable “Auto” in Primary

• If “Driver mode” is set to “Single”, selecting “TV” in “Primary”

• If “Driver mode” is set to Mirror or Multimonitor”, selecting “TV” in “Display_2”

12/09/2002 33

Dual-View FunctionDual-View Function

• Go to “ Control Panel Display Settings Advanced Utility Manager”,

• Click “Driver Mode Settings”, the screen will be popped up

• Disable “Auto” in Primary

• Selecting “Mutimonitor” in “Driver Mode”

• In “Display_2”, could select “VGA or TV”, depending on necessity

Documents

12/09/20021 Engineer Training Program Drivers & AP Installation Guide for N34BS3 Written By Suzanne Yu Uniwill Computer Intl Corp. 3358 Gateway Blvd. Fremont,