Dura-Trel, Inc. ~ PO Box 122, Sheboygan Falls, WI 53085 ~ Toll Free 877-258-6020

#11234 COMPOST BIN

ASSEMBLY INSTRUCTIONS

TOOLS NEEDED:

Drill with #2 Phillips Bit (recommended) or Phillips Screwdriver Super or Crazy Glue

BACK PANEL ASSEMBLY (Refer to Right Side of Drawing 1) Lay the two 2 x 2 x 30½” back posts on a clean, flat surface with the routed holes facing down and towards each other. Slide

eight ⅞ x 3 x 27½” rails through the routed holes that face one another. Fasten with ⅝" screws and snap screw caps over screw heads. FRONT PANEL ASSEMBLY (Refer to Left Side of Drawing 1) Lay the 2 x 2 x 30½” front right and front left posts on a clean, flat surface with the angled routed holes facing down and vertical

routed holes facing each other. Slide one ⅞ x 3 x 27½” rail into bottom routed hole in each post and one ⅞ x 1½ x 27½” rail

into top routed hole in each post. Fasten with ⅝" screws and snap screw caps over screw heads. COMPOST BIN ASSEMBLY (Refer to Drawing 2)

With back panel laying flat with routed openings facing up; slide the ⅞ x 3 x 24¼” angled side rails completely into both back

end posts. Be sure that the angled end of each rail is inserted into the back posts. Fasten the ⅞ x 3 x 24¼” angled side rails with

⅝" screws. Snap screw caps over screw heads. Next slide front panel onto side rails making sure there is enough

gap inside front posts to easily slide removable front rails in and out. Fasten the side rails with ⅝". Snap screw caps over screw heads. Apply glue to inside edges of 2 x 2" post caps and place on top of posts.

Insert ⅞ x 3 x 25¼” Front Removable Rails by sliding into the front left post completely then slide into the front right post, adjust so handle cutouts line up evenly.

If you encounter missing or defective parts, please contact manufacturer direct at toll free #

below.

PACKING LIST

PARTS CONTAINED:

QTY. PART NO. PART DESCRIPTION

1 40202-30500L 2 x 2 x 30½” LEFT FRONT POST

1 40202-30500R 2 x 2 x 30½” RIGHT FRONT POST

2 40202-30501 2 x 2 x 30½” BACK POST

7 47803-25250 ⅞ x 3 x 25¼”" FRONT RAIL (w/handle cutout)

16 57803-24250 ⅞ x 3 x 24¼” ANGLED SIDE RAIL

9 67803-27500 ⅞ x 3 x 27½” RAIL

1 67815-27500 ⅞ x 1½ x 27½" RAIL

Hardware Bag Includes:

4 7CAPS-0202P 2 x 2” POST CAP 54 7HDWR-K8058 ⅝" KAPPET SCREW

54 77HDWR-K8000 KAPPET SCREW CAPS

1 COMPOST BIN INSTRUCTION

NOTE: Some parts may be packed inside of others.

#11234 compost bin

PACKING LIST

#11234 compost bin

PARTS CONTAINED:

QTY. PART NO. PART DESCRIPTION 1 40202-30500L 2 x 2 x 30½” LEFT FRONT POST 1 40202-30500R 2 x 2 x 30½” RIGHT FRONT POST 2 40202-30501 2 x 2 x 30½” BACK POST 7 47803-25250 ⅞ x 3 x 25¼”" FRONT RAIL (w/handle cutout)

16 57803-24250 ⅞ x 3 x 24¼” ANGLED SIDE RAIL 9 67803-27500 ⅞ x 3 x 27½” RAIL 1 67815-27500 ⅞ x 1½ x 27½" RAIL Hardware Bag Includes:

4 7CAPS-0202P 2 x 2” POST CAP 54 7HDWR-K8058 ⅝" KAPPET SCREW 54 77HDWR-K8000 KAPPET SCREW CAPS 1 COMPOST BIN INSTRUCTION

NOTE: Some parts may be packed inside of others.

If you encounter missing or defective parts, please contact manufacturer direct at toll free # below.

Dura-Trel, Inc. – PO Box 122, Sheboygan Falls, WI 53085 – Toll Free 877-258-6020