step 1:There are some figures labeled on each tube, connecting the same figures together to assemble four circles.

step 2:Complete the frame assembly by connecting the rest supporting tubes as shown above. See detail views in last page.

Place the graphic cover at the bottom of the frame. Carefully pull up the cover to the top.Install the LED light on the assembled frame

step 3:step 4:

Note: lamp hook must be installed away from the center of the circle

Note: Set the lamp luminous face to the center of the circle to ensure uniform lighting

Graphic

10FT Circle Hanging Light Box To Install

step 8:Hang it onto the ceiling. Turn the switch on to light it up.

step 7:Hold the electric boxon the center of frame then connect the locks and pulgs to the electric box.

2

43

1

step 5:Find the reinforced hole in the graphic, hang each reinforced hole on the correspondingplug to keep it stay outside the light box, close the zippers on the graphic.

zipper

step 6:Connect the clips and power pulgs to the frame.

Graphic

Graphic

Graphic

Graphic

10FT Circle Hanging Light Box To Install

10FT Circle Hanging Light Box To Install

Top 13

Top 3

Top 2

Top 4 Top 5

Top 6

Top 7Top 8Top 1

Top 14

Top 12Top 15

Top 16

Top 9Top 10

Top 11

Bottom10 Bottom 9

Bottom 6

Bottom16

Bottom 4

Bottom 3

Bottom 5

Bottom15

Bottom 1 Bottom 8

Bottom 2

Bottom14Bottom13

Bottom12

Bottom 7Bottom11

Frame Installation 34

4

3

1

2

21