4
I-BUTTON BASED TICKETING SYSTEM ABSTRACT AIM: The main objective of this project is to develop an embedded system, which is used to book the ticket while traveling using I- Button technology. IMPLEMENTATION: This project is implemented 8051 based At89s52 developed board interfaced with I-Button, eeprom to store the data, keypad, LCD for display purpose. BLOCK DIAGRAM: MICROCONTROLLER AT89S52 LCD 16×2 i- Butt E 2 PROM Keypad RPS Cryst

108. I-Button Based Bus Fare Ticketing System

Embed Size (px)

Citation preview

Page 1: 108. I-Button Based Bus Fare Ticketing System

I-BUTTON BASED TICKETING SYSTEM

ABSTRACT

AIM:

The main objective of this project is to develop an embedded system, which is used to

book the ticket while traveling using I-Button technology.

IMPLEMENTATION:

This project is implemented 8051 based At89s52 developed board interfaced with I-

Button, eeprom to store the data, keypad, LCD for display purpose.

BLOCK DIAGRAM:

MICROCONTROLLER

AT89S52

LCD 16×2

i-Button

E2PROM

Keypad RPS

Crystal

Page 2: 108. I-Button Based Bus Fare Ticketing System

POWER SUPPLY:

DESCRIPTION:

The i-Button is a computer chip enclosed in a 16mm thick stainless steel can. Because of

this unique and durable container, up-to-date information can travel with a person or object

anywhere they go. The steel i-Button can be mounted virtually anywhere because it is rugged

enough to withstand harsh environments, indoors or outdoors. It is small and portable enough to

attach to a key fob, ring, watch, or other personal items, and be used daily for applications such

as access control to buildings and computers, asset management, and various data logging tasks.

In this work we are going to develop an embedded system board attached with an I-

BUTTON and will be given to some particular persons can be used that i-button like bus fare

card. Our project is that we can recharge our card with some amount and that amount of fare

from station to, to station will be deducted from that amount while we are in traveling, the

amount of deduction will be already programmed in the microcontroller.

The operation of the entire project will be displayed on the LCD which we are connecting to

our embedded board.

Step Down

Transformer

Bridge

Rectifier

Filter

Circuit

Regulator section

Page 3: 108. I-Button Based Bus Fare Ticketing System

SOFTWARE:

Embedded ‘C’

RIDE to write code

ISP to burn the chip

HARDWARE:

At89s52 based our own developed board

Power Supply

I-Button module

EEPROM

Keypad

ADVANTAGES: Low cost, automated operation, Low Power consumption.

REFERENCES

1. The 8051 micro controller and embedded systems by Mazidi.

2. www.wikipedia.org

3. www.atmel.com

4. www.8051projects.com

5. Embedded systems with 8051 by kenith j ayala

6. www.dallas.com