100T-CP Cathodic Protection Telemetry Module

The 100T-CP Cathodic Protection Telemetry module provides remote monitoring of pipe to soil readings to provide more granular data to aid in pipeline integrity management. The 100T-CP utilizes the same fi eld-proven technology of 100 series gas and water ERT® modules, offering cathodic protection monitoring that eliminates costly manual voltmeter reading of test stations. Developed in cooperation with the Gas Technology Institute, the 100T-CP is a natural complement to Itron’s portfolio of 100 series radio-frequency (RF) data collection solutions, extending value beyond meter reading.

Itron’s 100T-CP Cathodic Protection Telemetry module, combined with a buried reference cell and a connection to the pipeline, captures and stores analog DC and AC voltage reads. Sharing a common platform with 100G and 100W modules, the 100T-CP communicates using a similar RF protocol. Remotely collecting the readings eliminates costly manual reads and daily data enables trending analysis of voltage readings to detect possible

cathodic protection degradation. An unprecedented 20 year battery life provides maintenance-free monitoring.

The 100T-CP enables real time voltage monitoring using on-request reads through Itron’s ChoiceConnect fi xed network. The 100T-CP stores 480 days of scheduled DC and AC voltage reads which can be retrieved with a two-way communications request.

The 100T-CP is designed to easily mount to a customer-supplied CP test station post and connect to the pipe and buried reference cell. It incorporates lightning suppression to protect the module. A polycarbonate weather-resistant case encloses the electronic components, radio antenna, and 2 replaceable A-cell batteries.

The 100T-CP is made in the USA at Itron’s state-of-the-art facilities in Waseca, Minnesota.

SPECIFICATIONS

FEATURES

» Measures DC pipe to soil and impressed AC voltages using industry-standard measurement circuitry

» Returns real-time DC/AC voltage reads upon request of reading system

» Stores and updates the last 480 days of daily DC and AC voltage reads

» Transmits new Network Daily Message for use in the ChoiceConnect Fixed Network

» Offers up to +27 dBm (500 mW) of output power for fi xed network reads

» Operates in bubble-up mode and does not require a license from the Federal Communications Commission

» Offers optional enhanced securitysimilar to 100G DLS Datalogging ERT module using Itron encryption and authentication protocols

» Mounts using pipe-mounting hardware included with every 100T-CP

» Includes robust lightning suppression

» Exports voltage data from the collection system using standard xml fi le

» Optional factory programming enables 100T-CP installation without the need for fi eld programming tools

Regulatory and Standards

Compliant with the following:

» FCC 15.247 and 15.249

» FCC ID EWQ100TCP

» Industry Canada 864D-100TCP

» UL Listed Measurement Equipment

SPECIFICATIONS

Functional

» Power Source: 2 A-cell lithiumbattery pack

» Battery life: 20 years

» Design life: 20 years

» Lightning Protection: 40,000A for a 8/20μs current wave

» Radio programming parameters

• Test station site ID (not available iffactory programmed)

• Utility ID

• Optional enhanced security

• Read capture hour

» Programming Options

• Fixed Network Mode with +27 dBm (500 milliwatts) output power and a daily bubble-up of the Network Daily Message, which is transmitted 10 times, unless acknowledged sooner by the Fixed Network. This mode also includes a 60-second bubble-up rate of the Mobile Bubble-up message at +10 dBm output power (10 milliwatts)

• Mobile/Handheld Mode* with +10 dBm (10 milliwatts) output power and a 15-second bubble-up rate

• Mobile High Power Mode* with +24 dBm (250 milliwatts) output power and a 60-second bubble-up rate

• Hard-to-Read Mobile/Handheld Mode* with +24 dBm (250 milliwatts) output power and a 30-second bubble-up rate (This mode reduces battery life to 17 years in basic security mode and 13 years if enhanced security is chosen)

* Note: When reading 480 days of daily voltages with mobile or handheld, the operator will need to slow or stop briefl y which will increase route processing time.

» Communications protocol: Network Daily Message uses FM modulation; all other messages are AM modulated

» Frequency Range: Frequency-Hopping Spread Spectrum 903 to 926.85 MHz in the ISM band; program frequency, 908 MHz

» Tamper/Flag/Counter: Tilt, Cut Cable, Low Battery, Programming

» Operating temperature: -40°F to +158°F (-40°C to +70°C)

» Operating humidity: 5 to 95% relative humidity, non-condensing

» Product identifi cation: Numeric andbar-coded serial number

» Input

• DC

− Range: -2 to +2 VDC

− Accuracy: +/- 5 mV (-2 to 0V) +/- 10 mV (0 to +2V)

− DC input impedance: 10M Ohm@ 1 V

− Resolution: 1 mV

− Read Frequency: once per day(480 stored)

• AC

− Range: 1.4 to 30 VAC RMS

− Accuracy: larger of 0.5 V or 3%

− AC input impedance: 1M Ohm@ 15 VRMS

− Resolution: 100 mV

− Read frequency: once per day(480 stored)

100T-CP

» Message Contents

• Network Daily Message

− Endpoint ID

− Utility ID

− Endpoint type/subtype

− Extended tamper/fl ag fi eld

− Data blob containing site ID and the most recent daily DC and AC voltage readings

− Timestamp, in secure messages

• Mobile Bubble-up Message

− Endpoint ID

− Endpoint type/subtype

− Data blob containing site ID andthe most recent daily DC and AC voltage readings

− Extended tamper/fl ag fi eld

− Timestamp, in secure messages

Physical

» Product is made from gray polycarbonate with encapsulated electronics for protection against environmental hazards and tampering

» Dimensions: 4.9” x 3.6” x 2.5”

» Shipping

• Modules per box: 10

• Box dimensions: 23.5” x 19.5” x 4.25”

• Box weight: 16.5 lbs/ 7.5 kg

• Modules per pallet*: 440

• Pallet dimensions: 40” x 48” x 48”H

• Pallet weight: 726 lbs/ 330 kg* Modules are not stacked when shipped but can be stored two pallets high. Modules are to be stored indoors. If outdoor storage is necessary, modules must be sheltered from weather and damage.

Additional Information

Programming Devices

» FC300SR with Field Deployment Manager (FDM) v3.3 or higher, or

» FC200SR (P/N: FC2-0005-004, FC2-0006-004, FC2-0005-104, FC2-0006-104) with FDM v3.3 or higher, or

» Customer-supplied laptop and Itron’s 900 MHz Belt Clip Radio (with fi rmware v1.6) with FDM v3.3 or higher

Approved Reading Devices for Collecting Fixed Network Reads

» ChoiceConnect Fixed Network 100 Network, including:

• Cell Control Unit 100

• Repeater 100

• Network software v5.0 or higher

Approved Reading Devices for Collecting 480 DC/AC Reads and Out of Route Reads with Mobile/Handheld

» FC300SR with Field Collection System (FCS) v2.6 or higher

» FC200SR with Field Collection System (FCS) v2.6 or higher

» Mobile Collector Lite (B and DL) with FCS v2.6 or higher

» MC3 (B and DL) with MC software v3.6 or higher and FCS v2.6 or higher

Documentation

» 100T-CP Cathodic Protection Telemetry Module Installation Guide (TDC-1344)

» Gas and Telemetry Module Ordering Guide (PUB-0117-001)

» 100 Series Gas and Telemetry Technology Guide (TDC-0825)

» Field Deployment Manager Endpoint Tools Mobile Application Guide(TDC-0934)

» Field Deployment Manager Endpoint Tools Confi guration Guide (TDC-0935)

» Field Deployment Manager Endpoint Checklist (TDC-0942)

While Itron strives to make the content of its marketing materials as timely and accurate as possible, Itron makes no claims, promises, or guarantees about the accuracy, completeness, or adequacy of, and expressly disclaims liability for errors and omissions in, such materials. No warranty of any kind, implied, expressed, or statutory, including but not limited to the warranties of non-infringement of third party rights, title, merchantability, and fi tness for a particular purpose, is given with respect to the content of these marketing materials. © Copyright 2015 Itron. All rights reserved. 101301SP-03 3/15

Join us in creating a more resourceful world.To learn more visit itron.com

CORPORATE HQ2111 North Molter RoadLiberty Lake, WA 99019 USA

Phone: 1.800.635.5461Fax: 1.509.891.3355