10 ELECTRICAL (Electrique)2011

592

All part numbers in BOLD MAGENTA are new for 2011.

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

593

PART # DESCRIPTION SUG. RETAIL2104-0148 For 00-11 FXST, FLST models $17.952104-0140 For 84-99 FXST, FLST models, 91-98 FXD models 17.952104-0146 For 99-11 FXD, FXDWG models 17.952104-0142 For 84-99 FXR models 17.952104-0145 For 99-08 FLT, FLHT, FLHR, FLHX, FLTR models 19.952104-0144 For 97-98 FLT, FLHT, FLHR, FLTR models 18.952104-0141 For 85-96 FLT, FLHT, FLHR, FLTR models 17.95

PART # DESCRIPTION SUG. RETAIL2104-0186 For 07-11 XL models $18.952104-0185 For 04-06 XL models 18.952104-0143 For 86-03 XL models 17.952104-0147 For 98-03 XL 1200S 33.952104-0139 Universal w/ 180° and 90° boots (except Twin Cam) 21.952104-0149 Universal dual plug w/ two 40” wires and ends

(except Twin Cam) 29.95

8.8MM SPARK PLUG WIRE SETS•Constructed with silicone throughout the jacket, insulation and core to deliver high-temperature resistance

•Rated at SAE Class E J2031 with a continuous operating temperature of 450° F

•Made in the U.S.A.

2104-0140

2104-0185

PART # DESCRIPTION SUG. RETAILFOR 08-11 FXCW/C2104-0170 Polished stainless $50.952104-0167 Sterling Chromite II 50.952104-0171 Candy apple red 50.952104-0166 Candy apple blue 50.952104-0169 Black pearl 50.952104-0168 Gold 50.95FOR ALL 00-11 FXST/FLST MODELS2104-0109 Polished stainless 50.950802-3041 Sterling Chromite II 50.952104-0024 Candy apple red 50.952104-0025 Candy apple blue 50.952104-0026 Black pearl 50.952104-0027 Gold 50.95FOR 84-99 FXST/FLST (W/ COIL ADJACENT TO OIL TANK), 91-98 DYNA GLIDE2104-0096 Polished stainless 50.950802-3023 Sterling Chromite II 50.952104-0009 Candy apple red 50.952104-0010 Candy apple blue 50.952104-0014 Black pearl 50.952104-0015 Gold 50.95FOR 09-11 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE2104-0176 Polished stainless 50.952104-0173 Sterling Chromite II 50.952104-0177 Candy apple red 50.952104-0172 Candy apple blue 50.952104-0175 Black pearl 50.95

PART # DESCRIPTION SUG. RETAILFOR 09-11 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE (CONT)2104-0174 Gold $50.95FOR 99-08 FLT/FLHT/FLHR/FLTR/FLHX2104-0107 Polished stainless 50.950802-3033 Sterling Chromite II 50.952104-0020 Candy apple red 50.952104-0021 Candy apple blue 50.952104-0022 Black pearl 50.952104-0023 Gold 50.95FOR 97-98 FLT/FLHT/FLHR/FLTR2104-0106 Polished stainless 50.950802-3032 Sterling Chromite II 50.952104-0018 Candy apple red 50.952104-0019 Candy apple blue 50.95FOR 85-96 FLT/FLHT/FLHR2104-0104 Polished stainless 50.950802-3031 Sterling Chromite II 50.952104-0016 Candy apple red 50.952104-0017 Candy apple blue 50.95FOR 99-11 DYNA GLIDE2104-0108 Polished stainless 50.950802-3040 Sterling Chromite II 50.952104-0031 Candy apple red 50.952104-0032 Candy apple blue 50.952104-0033 Black pearl 50.952104-0034 Gold 50.95

PART # DESCRIPTION SUG. RETAILFOR 82-94, 99-00 FXR2104-0099 Polished stainless $50.950802-3030 Sterling Chromite II 50.952104-0028 Candy apple red 50.952104-0029 Candy apple blue 50.952104-0030 Black pearl 50.95FOR 07-11 XL2104-0134 Polished stainless 50.952104-0131 Sterling Chromite II 50.952104-0135 Candy apple red 50.952104-0130 Candy apple blue 50.952104-0133 Black pearl 50.952104-0132 Gold 50.95FOR 04-06 XL2104-0110 Polished stainless 50.952104-0045 Sterling Chromite II 50.952104-0041 Candy apple red 50.952104-0042 Candy apple blue 50.952104-0043 Black pearl 50.952104-0044 Gold 50.95FOR 86-03 XL (180° BOOT) EXCEPT 98-03 1200S2104-0098 Polished stainless 50.950802-3029 Sterling Chromite II 50.952104-0037 Candy apple red 50.952104-0038 Candy apple blue 50.952104-0039 Black pearl 50.952104-0040 Gold 50.95

BRAIDED SPARK PLUG WIRES•High-voltage, high-temperature, 8mm silicone ignition wires featuring high-performance suppression conductor cores for compatibility with all H-D ignition systems

•Posi-Lock spring clip terminals and the highest quality silicone spark plug boots•Tuned (ohm resistance) conductor core is engineered to duplicate OEM specifications for computer module compatibility to ensure maximum performance and clean spark delivery

•Heavy-walled extreme-duty crystal-clear Teflon® outer insulation eliminates the need for grounding wires and ensures no interference with late-model computer modules

•Each strand of the outer braid is coated with a plastic enamel and then covered with a clear Teflon skin•Perfect match for Magnum braided clutch, throttle and idle cables as well as brake lines•Made in the U.S.A.

2104-00960802-30412104-0009

2104-0010 2104-0014

2104-0015

PART # DESCRIPTION SUG. RETAIL162082S For 84-94, 99-00 FXR, FXRS, FXRT and FXLR $41.95162087S For 91-98 Dyna Glide; 84-90 FXST/FLST models; 85 FXEF and FXSB; 85-86 FXWG 41.95162086S For 86-03 883, 1100 and 1200 XL (except 1200S) 41.95

ARMOR SHIELD CUSTOM 8MM WIRE SET•Feature premium blue 8mm suppression silicone wire, heavy-duty blue silicone plug boots and Accel’s Armor Shield braid with stainless steel ferrules

•Give a handsome metallic look while providing additional protection to the most vulnerable part of the ignition system

•Come complete with installation instructions and hardware grounding kit


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

594

PART # DESCRIPTION SUG. RETAILFOR 08-11 FXCW/C W/ CENTER MOUNT COIL (8” LEADS; 135° PLUG BOOTS)2104-0163 Black $42.952104-0213 Red 42.952104-0214 Blue 42.952104-0215 Yellow 42.95FOR 09-11 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKE (36”/18” LEADS W/ 135° PLUG BOOTS)2104-0164 Black 42.952104-0196 Red 42.952104-0197 Blue 42.952104-0198 Yellow 42.95FOR 00-11 FLST/FXST/FXSTD, 99-11 DYNA GLIDE (CV/EFI) (18”/7” LEADS; 90° PLUG BOOTS)2104-0077 Black 42.952104-0187 Red 42.952104-0188 Blue 42.952104-0189 Yellow 42.95FOR 84-99 FXST/FLST, 91-98 DYNA GLIDE, 85-86 FX/FL 65-85 XL (16”/7” LEADS, 90° PLUG BOOTS)2104-0080 Black 42.952104-0207 Red 42.952104-0208 Blue 42.952104-0209 Yellow 42.95FOR 84-94, 99-00 FXR W/ CENTER MOUNT COIL (12” LEADS, 90° PLUG BOOTS)2104-0082 Black 42.952104-0210 Red 42.952104-0211 Blue 42.95

PART # DESCRIPTION SUG. RETAILFOR 84-94, 99-00 FXR W/ CENTER MOUNT COIL (12” LEADS, 90° PLUG BOOTS) (CONT)2104-0212 Yellow $42.95FOR 99-08 FLHT/FLHR/FLTR/FLHX (EFI), 04-06 XL (21” LEADS; 180° PLUG BOOTS)2104-0079 Black 42.952104-0199 Red 42.952104-0204 Blue 42.952104-0205 Yellow 42.95FOR 99-06 FLHT/FLHR/FLTR/FLHX (CV) (18”/9” LEADS; 180° PLUG BOOTS)2104-0078 Black 42.952104-0193 Red 42.952104-0194 Blue 42.952104-0195 Yellow 42.95FOR 80-98 FLT/FLHT, 86-03 XL (EXCEPT 98-03 1200S) (18”/9” LEADS; 180° PLUG BOOTS)2104-0081 Black 42.952104-0190 Red 42.952104-0191 Blue 42.952104-0192 Yellow 42.95UNIVERSAL (90° PLUG BOOTS)2104-0083 Black 42.952104-0216 Red 42.952104-0218 Blue 42.95UNIVERSAL (180° PLUG BOOTS)2104-0084 Black 42.952104-0217 Red 42.952104-0219 Blue 42.95

PART # DESCRIPTION SUG. RETAIL10.4MM2104-0165 For 09-11 FLHT/FLHR/FLHX/FLTR/H-D FL Trike,

36”/18” leads, 135° plug boots $60.950802-2031 For 00-11 FLST/FXST/FXSTD, 99-11 Dyna Glide,

(CV/EFI), 18”/7” leads, 90° plug boots 60.950802-0035 For 84-94/99-00 FXR, 12” leads, 90° plug boots 60.950802-2033 For 99-06 FLT/FLHT/FLHR/FLTR/FLHX (CV),

18”/9” leads, 180° plug boots 60.95

PART # DESCRIPTION SUG. RETAIL10.4MM (CONT)0802-2034 For 99-08 FLT/FLHT/FLHR/FLTR/FLHX (EFI) 04-06 XL,

21” leads, 180° plug boots $60.950802-0033 For 84-98 FLT/FLHT; 86-03 XL (except 98-03 1200S),

18”/9” leads, 180° plug boots 60.950802-6081 24” universal; 90° boots 60.95

8.2MM

THUNDERVOLT 50 WIRES•Certified dyno tests showed a horsepower increase when used in Twin Cam motors•Unloads spark plugs for easier starts, smoother, stronger running and better gas mileage•Wires feature Ferrite Spiral Wound Coated cores, which are made of an exclusive copper/nickel alloy that is bonded by a conductive acrylic latex coating

•Core resistance of 50 ohms/foot•Fat .409” wires also feature triple-layer Zimplex® silicone covers, able to withstand temperatures up to 600°F•Available in 10.4mm or 8.2mm; 8.2mm now available in a variety of colors•Universal wires with standard boots are 24” long; universal wires with Pro Comp boots are 36” long

2104-0165

2104-0163

2104-0164

2104-0083


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

595

PART # DESCRIPTION SUG. RETAILFOR 08-11 FXCW/C W/ CENTER MOUNT COIL (8” LEADS; 135° BOOTS)2104-0152 Black $28.952104-0153 Red 28.952104-0154 Blue 28.95FOR 00-11 FXST, FLST; 99-11 DYNA GLIDESDS-242601 Black 28.95DS-242603 Red 28.95DS-242604 Purple 28.95DS-242605 Yellow 28.95DS-242607 Blue 28.95DS-242609 Orange 28.95DS-242610 Green 28.952104-0088 Gray w/ black boots 28.95FOR 09-11 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKE W/ FUEL INJECTION (36”/18” LEADS W/ 135° BOOTS)2104-0155 Black 28.952104-0157 Red 28.952104-0158 Purple 28.952104-0159 Yellow 28.952104-0160 Blue 28.952104-0161 Orange 28.952104-0162 Green 28.952104-0156 Gray w/ black boots 28.95FOR 99-06 FLHT, FLTR, FLHR, FLHX W/ CARB.DS-242611 Black 28.95DS-242613 Red 28.95DS-242614 Purple 28.95DS-242615 Yellow 28.95DS-242617 Blue 28.95DS-242619 Orange 28.95DS-242620 Green 28.95

PART # DESCRIPTION SUG. RETAILFOR 99-06 FLHT, FLTR, FLHR, FLHX W/ CARB. (CONT)2104-0089 Gray w/ black boots $28.95FOR 99-08 FLHT, FLHR, FLTR, FLHX W/ FUEL INJECTION, 04-06 XL (21” LEADS; 180° BOOTS)2104-0069 Black 28.952104-0071 Red 28.952104-0072 Purple 28.952104-0073 Yellow 28.952104-0074 Blue 28.952104-0075 Orange 28.952104-0076 Green 28.952104-0090 Gray w/ black boots 28.95FOR 84-99 FX, FL, FXST, FXWG (W/ COIL ADJACENT TO OIL TANK), 91-98 DYNA GLIDES (90° BOOTS)DS-242132 Black 28.95DS-242149 Red 28.95DS-242347 Purple 28.95DS-242133 Yellow 28.95DS-242349 Blue 28.95DS-242151 Hot orange 28.952104-0091 Gray w/ black boots 28.95FOR 84-94/99 FXR (90° BOOTS)DS-242142 Black 28.95DS-242153 Red 28.95DS-242350 Purple 28.95DS-242143 Yellow 28.95DS-242352 Blue 28.95DS-242155 Hot orange 28.95FOR 84-98 FLT, FLHT AND 86-03 XL (EXCEPT 98-03 1200S) (180° BOOTS)DS-242146 Black 28.95DS-242157 Red 28.95

PART # DESCRIPTION SUG. RETAILFOR 84-98 FLT, FLHT AND 86-03 XL (EXCEPT 98-03 1200S) (180° BOOTS) (CONT)DS-242353 Purple $28.95DS-242147 Yellow 28.95DS-242354 Blue 28.95DS-242159 Hot orange 28.952104-0092 Gray w/ black boots 28.95UNIVERSAL 90° WIRE KITSDS-242030 Black 28.95DS-242032 Red 28.95DS-242355 Purple 28.95DS-242033 Yellow 28.95DS-242034 Blue 28.95DS-242036 Hot orange 28.95DS-242037 Hot green 28.952104-0086 Gray w/ black boots 28.95UNIVERSAL 135° WIRE KITSDS-242358 Black 28.95DS-242360 Red 28.95DS-242361 Purple 28.95DS-242362 Yellow 28.95DS-242364 Blue 28.95DS-242366 Hot orange 28.95DS-242367 Hot green 28.95UNIVERSAL 180° WIRE KITSDS-242040 Black 28.95DS-242042 Red 28.95DS-242356 Purple 28.95DS-242043 Yellow 28.95DS-242044 Blue 28.95DS-242046 Hot orange 28.95DS-242047 Hot green 28.952104-0087 Gray w/ black boots 28.95

8MM CUSTOM-COLORED PLUG WIRES•Designer plug wire sets come in distinctive, highly visible colors•Pre-cut and have the plug/coil boots and terminals already installed•Boots and wires are made from extra-high-temperature silicone, which gives protection up to 600°F

•Spiro-Pro core provides up to 10 times the conductivity of a standard carbon-core wire•Low resistance means they run cooler and last 3-4 times longer than carbon-core wires•Designed for electronic ignitions, but also work great on point types•Available in prefitted styles and universal styles with 90°, 180° and 135° plug boots•Universal wire kits feature 24” wire leads (not for Twin Cam)•Sold in pairs•Made in the U.S.A.

DS-242030

DS-242347

DS-242349

Universal wire kits


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

596

CUSTOM COLORED 409 PRO RACE WIRES•Same features as the Sumax 8mm wires but larger (10.4mm) for that fat look

•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 00-11 FXST, FLST; 99-11 DYNA GLIDE (90° BOOT)DS-242171 Black $42.95DS-242174 Red 42.95DS-242186 Blue 42.95FOR 09-11 FLHT, FLHR, FLHX, FLTR, H-D FL TRIKE2104-0222 Black 42.952104-0223 Red 42.952104-0224 Blue 42.95FOR 99-08 FLHT, FLHR, FLTR WITH FUEL INJECTION, 04-06 XL (180° BOOT)2104-0093 Black 42.952104-0094 Red 42.952104-0095 Blue 42.95

PART # DESCRIPTION SUG. RETAILFOR 99-06 FLHT, FLTR, FLHR, FLHX WITH CARB. (180° BOOT)DS-242173 Black $42.95DS-242185 Red 42.95DS-242190 Blue 42.95FOR 84-99 FX, FL, FXWG, FXST, FLST (WITH COIL ADJACENT TO OIL TANK), 91-98 DYNA GLIDE (90° BOOT)DS-242001 Black 42.95DS-242005 Red 42.95DS-242118 Blue 42.95FOR 84-94/99 FXR (90° BOOT)DS-242004 Black 42.95

PART # DESCRIPTION SUG. RETAILFOR 84-94/99 FXR (90° BOOT) (CONT)DS-242013 Red $42.95DS-242163 Blue 42.95FOR 84-98 FLT, FLHT AND 86-03 XL (EXCEPT 98-03 1200S) (180° BOOT)DS-242002 Black 42.95DS-242011 Red 42.95DS-242119 Blue 42.95

DS-242001

DS-242119

DS-242011

BLUE STREAK XXX 8MM SPARK PLUG WIRE SETS•Triple silicone construction through jacket, insulation and core for higher heat-resistance•Rated at SAE CLASS E J2031 with a continuous operating temperature of 450°F•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-242217 For 00-11 FXST, FLST $18.95DS-242168 For 84-99 FXST, FLST, 91-98 FXD 18.95DS-242191 For 99-11 FXD, FXDWG 18.95DS-242193 For 84-99 FXR 18.95DS-242196 For 99-08 FLT, FLHT, FLHR, FLTR 18.95DS-242195 For 97-98 FLT, FLHT, FLHR, FLTR 18.95DS-242169 For 85-96 FLT, FLHT, FLHR, FLTR 18.952104-0184 For 07-11 XL 18.95

PART # DESCRIPTION SUG. RETAIL2104-0183 For 04-06 XL $18.95DS-242194 For 86-03 XL (except 98-03 1200S) 18.95DS-242198 For 98-03 XL 1200S (4-wire set) 35.95DS-242167 Universal 40” wire w/ 180° and 90° boots

(except Twin Cam) 17.952104-0008 Universal dual plug w/ two 40” wires and

ends (except Twin Cam) 29.95

DS-242168

2104-0008

PART # SUG. RETAILDS-242243 $94.95DS-242244 94.95DS-242247 94.95DS-242248 94.95



PART # SUG. RETAILDS-242276 $94.95DS-242279 94.95DS-242280 94.95

PRICE LIST

FITS MODEL RED STD. COIL BLACK STD. COILPREMADE KITSFor 00-11 FXST/FLST, 99-11 Dyna DS-242279 DS-242280For 84-99 FXST/FLST, 91-98 Dyna DS-242251 DS-242252For 84-94 FXR, 99 FXR DS-242247 DS-242248For 99-08 FLHT/FLHR/FLTR/FLHX DS-242269 DS-242276For 92-98 FLHT/FLHR/FLT DS-242243 DS-242244

FITS MODEL RED STD. COIL BLACK STD. COILPREMADE KITS (CONT)For 86-03 XL (except 98-03 1200S) DS-242243 DS-242244UNIVERSAL KITS (EXCEPT TWIN CAM)23” 90° plug boot DS-242255 DS-24225630” 90° plug boot DS-242257 DS-24225823” 180° plug boot - DS-242260

HOTWIRES™ PERFORMANCE SPARK PLUG WIRES FROM NOLOGY™ ENGINEERING•Easier starting, smoother running and reduced fuel consumption•Each 8mm resistor-type wire has a capacitor built into the wire to allow a hotter, shorter spark

•Spark is up to 300 times more powerful than stock to promote faster and more complete fuel burn in the cylinder head

•A short spark duration of 4 nanoseconds actually reduces spark plug wear

•Available in kits for specific applications or in universal kits•Sold in pairs•Made in the U.S.A.

DS-242256

DS-242257

DS-242251


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

597

8MM SUPPRESSION PLUG WIRE SET•Dyna suppression core spark plug wires use the highest-grade graphite suppression core to reduce electrical noise and increase engine performance

•Two wires, each 48” L; cut to length; can be used for up to four cylinders


NOTE: Not for Twin Cam or 04-11 XL applications.PART # DESCRIPTION SUG. RETAILDW800 8mm suppression plug wire set $19.95

PART # DESCRIPTION SUG. RETAILDS-242330 Single-plug wire kit $16.95DS-242331 Dual-plug wire kit 31.95

UNIVERSAL SPARK PLUG WIRE KITS•8mm spiral-wound silicone wires (black)•Include 41” wires, boots and terminals•Made in the U.S.A.

NOTE: Not for Twin Cam or 04-11 XL applications.

DS-242330 DS-242331

PART # DESCRIPTION SUG. RETAILFOR TWIN CAM MODELS WITH 90° SPARK PLUG BOOTS AND STRAIGHT COIL BOOTS7806-1556 7mm spark plug wire kit; 36” $20.95FOR EVOLUTION BIG TWIN AND XL MODELS (EXCEPT 04-11 XL)7806-1557 8.5mm spark plug wire kit (includes 90° and 115°

spark plug boots and assorted coil boots and terminals) (18”/24”) 24.95

UNIVERSAL SPARK PLUG WIRE KITS•Wires available in 7mm or 8.5mm dia.•Kit includes plug wires, terminals and boots for many applications•Made in the U.S.A.

7806-1556

7806-1557

PART # DESCRIPTIONSUG.

RETAIL2104-0046 Black $62.95


RETAIL2104-0047 Blue $62.95


RETAIL2104-0048 Red $62.95


RETAIL2104-0049 Yellow $62.95

THUNDERSPORT UNIVERSAL 5MM IGNITION WIRE KITS•Half the diameter of stock wires, and flexible

•Run through cylinder heads, rocker covers and frame tubes for a completely hidden, clean look

•150 ohms per foot: 5mm silicone jacket is rated for over 550°F•Available in four colors; black, blue, red and yellow•Kit includes two 5’ (1.52m) leads with 90° spark plug ends


2104-0046 2104-00472104-0048

2104-0049

PART # COLOR SUG. RETAILFOR 00-11 FXST, FLST MODELS2104-0115 Black $27.952104-0116 Yellow 27.952104-0128 Blue 27.952104-0129 Red 27.95FOR 99-11 FXD, FXDWG MODELS2104-0111 Black 27.952104-0112 Yellow 27.952104-0124 Blue 27.95

PART # COLOR SUG. RETAILFOR 99-11 FXD, FXDWG MODELS (CONT)2104-0125 Red $27.95FOR 99-08 FLHT, FLHR, FLHX, FLTR MODELS2104-0113 Black 27.952104-0114 Yellow 27.952104-0126 Blue 27.952104-0127 Red 27.95

8MM SPARK PLUG WIRE SETS•Deliver up to five times more energy to the spark plug

•Fully compatible with fuel-injection systems•Will work great with carbureted engines as well

•Can withstand temperatures over 500°•Silicone outer layer

DESCRIPTION YELLOWSUG.

RETAIL BLACKSUG.

RETAILSingle-plug 90° ends DS-242651 $26.95 DS-242652 $26.95Dual-plug 90° ends DS-242653 53.95 DS-242654 53.95Single-plug straight ends DS-242655 26.95 DS-242656 26.95Dual-plug straight ends - - DS-242658 53.95

UNIVERSAL 8.8MM PLUG WIRE KITS•Graphite suppression core wires for street or strip

•Available for single- or dual-plug head applications

•Single-plug kits contain one 42” wire; dual-plug kits contain two 42” wires

•Kits come with brass locking terminals and boots for male- or female-type coil ends



DS-242651DS-242652

DS-242653


RETAILDS-242679 For 00-11 FXST/FLST $29.952104-0121 For 91-99 FXST/FLST 29.95DS-242676 For 99-11 FXD/FXDWG 29.952104-0119 For 84-94 FXR 29.95DS-242677 For 99-08 FLHT/FLHR/FLTR/FLHX 29.952104-0122 For 97-98 FLT/FLHT/FLHR 29.95


RETAIL2104-0123 For 94-96 FLT/FLHT/FLHR $29.95DS-242678 For 98-03 XL 1200S (4-wire set) 62.952104-0120 For 86-03 XL 29.95DS-242675 For 96-98 Buell 29.95DS-242676 For 99-02 Buell 29.95

300+ CUSTOM FIT 8MM IGNITION WIRE SETS•Black silicone jacket with aramid core and fiberglass braiding•Terminal ends are high-conductivity brass with silicone boots•Eliminate electrical leakage; provide excellent performance in high-temperature applications•Work with electronic- or point-type ignitions•Made in the U.S.A.

DS-242679

2104-0119

DS-242676


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

598

CUSTOM 8.8MM WIRE SETS•These yellow or black heavy-duty silicone 8.8mm wire sets are cut to size and available with suppressor core

NOTE: H-D ignition systems require the use of suppression core wire; copper wire may damage the ignition system.

FITS MODEL YELLOW SUG. RETAIL BLACK SUG. RETAILFor 91-99 FXST, FXSTC, FLST and FLSTC 162089 $24.95 172089B $24.95For 84-90 FXST, FXSTC, FLST and FLSTC; 91-98 Dyna; 85-86 FX 162072 24.95 172072B 24.95For 84-94, 99 FXR, FXRS, FXRT and FXLR 162082 24.95 172082B 24.95For 85-98 FLT and FLHT 162090 24.95 172090B 24.95For 84 FLT, FLHT, FLHTC and FLTC 162083 24.95 172083B 24.95For 86-03 XL except 1200S 162086 24.95 172086B 24.95

SUPPRESSOR CORE

8MM PLUG WIRE SEPARATORS•Chrome-finished super-custom plug wire separators with grooved lines milled into them; include chrome screws


PART # DESCRIPTION SUG. RETAILDS-242187 Plug wire separators (pr.) $19.95

PART # DESCRIPTION SUG. RETAIL2107-2578 8.8mm plug-wire separator $27.95

8.8MM PLUG-WIRE SEPARATOR•Chrome billet T-6 aluminum•Holds wires apart for a clean look•Sold each•Made in the U.S.A.

CHROME HEADBOLT/SPARK PLUG COVERS•A step beyond individual headbolt covers and spark plug covers•Drag and Billy Westbrook have teamed up to put an end to having to buy individual parts; our die-cast aluminum covers fit over the entire headbolt area as well as the spark plug base

•Beautiful detail to really accent the finned area of the head


RETAILDS-305003 Chrome headbolt/spark plug covers

for 86-99 80” Big Twin (set) $39.95DS-305005 Repl. rubber grommets for PART #DS-305003 (pr.) 3.95DS-305009 Chrome headbolt/spark plug covers

for 86-03 XL (except 98-03 1200S) (set) 39.95

DS-305009DS-305003

PART # DESCRIPTION SUG. RETAILDS-196091 Chrome spark plug holder $16.95

CHROME SPARK PLUG HOLDER•A chrome-plated replica of the spark plug holder found on early Panheads, updated to accept even late-model Shovelhead deep-reach plugs

•Metal holder clamps onto the rear frame tube behind the oil tank on all Big Twin models and holds two extra spark plugs (not supplied)

•Held in place by a thumbscrew

PART # DESCRIPTION SUG. RETAIL2104-0054 Red $26.952104-0055 Amber 26.952104-0056 Blue 26.95

LAZER NODES™•Give off a brilliant flash of spark every time your plugs fire

•Easy way to see if your machine has spark•Just cut your plug wire in desired Lazer Nodes location and install in minutes

•Work with standard or electronic ignitions•Assembled, double-sealed and tested•Fit most models with exposed wires

NOTE: Not for use on fuel-injected models.

2104-0054

2104-0055

2104-0056

PART # DESCRIPTION SUG. RETAIL2870368 Spark plug caddy $2.95

SPARK PLUG CADDY•Dual-plug caddy holds two 14mm spark plugs securely in place

PART # DESCRIPTION SUG. RETAILFIREDOMES0940-0448 For Twin Cam and Evolution XL (pr.) $26.95HEADBOLT COVERSDS-376492 For 86-11 Big Twin and XL models (4-pk.) 21.95

FIREDOMES AND HEADBOLT COVERS•A quick, easy way to dress up the engine•Firedomes slip right over the spark plug, held in place with a rubber grommet•Low-profile peaked design headbolt covers cover the entire headbolt•All feature a beautiful chrome finish•Firedomes sold in pairs, headbolt covers sold in 4-pk.

0940-0448

DS-376492


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

599

PART # DESCRIPTION SUG. RETAILDS-305006 90° bend, blue $7.95DS-305007 90° bend, red 7.95

PART # DESCRIPTION SUG. RETAILDS-305010 Straight, red $7.95DS-305011 Straight, blue 7.95

PART # DESCRIPTION SUG. RETAILDS-305012 120° bend, red $7.95DS-305013 120° bend, blue 7.95

FLASHING SPARK PLUG CAPS•Fit 10, 12 and 14mm plugs with terminal nuts•Accept 7 or 8mm plug wires•For terminal nut style plugs•Sold each

NOTE: Not for use on fuel-injected models.

DS-305006

DS-305007

DS-305010

DS-305011

PART # DESCRIPTION SUG. RETAILDS-242659 Spark plug indexer $22.95

PART # DESCRIPTION SUG. RETAILDS-242660 Index washers (30-pk.) $34.95

SPARK PLUG INDEXER•Index tool allows for specifying the location of the ground electrode for maximum flame front generation

•Soft copper spark plug washers are used in conjunction with the indexer to align ground electrode as well as adjust plug to piston clearance (washers sold separately)

•Gold anodized billet aluminum with knurled edges for hand-held use – can also be vise-mounted

•Designed for 14mm spark plugs•Made in the U.S.A.

DS-242659 DS-242660

PART # FITS MODEL GAP SUG. RETAILY2418P For 99-11 Twin Cam .040” $18.95Y2410P For 84-00 80” Evolution .040” 18.95Y2418P For 86-11 XL 883, 1100 and 1200 .040” 18.95

“CYCLELITE” PLATINUM SPARK PLUGS•Accel’s platinum plugs are made from state-of-the-art components•Platinum tipped for longer life and durability that holds a precise gap even longer

•Knurled chromium-nickel alloy side wire for greater durability and greater spark with reduced voltage

•Pure copper core decreases fouling•Sold in pairs; made in the U.S.A.

PART # FITS MODEL ACCEL # GAP SUG. RETAILDS-242130 For 99-11 Twin Cam,

84-00 80” Evolution 2418 .040” $8.95DS-242127 For 80-99 Big Twin 2410A .040” 8.95DS-2421251 For 84-00 80” Evolution 2410 .040” 7.95DS-242130 For 86-11 XL 2418 .040” 8.951 Resistor-type plug.

U-GROOVE SPARK PLUGS•Accel’s state-of-the-art, U-Groove spark plugs with ground electrodes, copper glass inner seal and an electric heat seal to prevent leakage in high-compression engines

•Permits the spark to develop a larger, fuller flash for a more complete burn

•Extra-wide heat range•Sold in pairs

PART # FITS MODEL SUG. RETAIL2103-0049 For 84-00 Big Twin Evolution $11.952103-0050 For 86-11 XL, 99-11 Twin Cam and 94-07 Buell 12.95

SILVER™ SPARK PLUGS•Forget iridium, copper or platinum electrodes; silver is the best electrical and thermal conductor of any metal, so the spark encounters the least resistance and little or no spark energy is lost

•Designed for performance but durable enough for everyday use

•Large-diameter silver center electrode delivers the most powerful spark for increased horsepower and cleaner combustion

•Extremely resistant to corrosion so the electrode gap remains virtually unchanged for the life of the spark plug

•Provides widest heat range latitude•Sold each PART # GAP DESCRIPTION SUG. RETAIL

RA8HC .040” For 99-11 Twin Cam, 86-11 XL $2.75RN-12-YC .040” For 84-00 80” Big Twin 2.60RH8C .030” For 165/175cc w/ 7/16” reach 3.20

COPPER PLUS™ SPARK PLUGS•Copper Plus spark plug has a copper core center electrode that allows for accurate control of heat range, optimizing performance, and longevity of the spark plug

•Patented SAC-9 semi-conductor resistor for maximum EMI and RFI suppression

•Patented Ultraseal™ coated shell for rust prevention•Sold each•Made in the U.S.A.

NOTE: Part numbers beginning with “R” are resistor type. Order by Champion numbers.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

600

PART # DESCRIPTION SUG. RETAIL2103-00181 For 99-11 Twin Cam $3.80DCPR7E For 99-11 Twin Cam 3.80DCPR8E2 For 99-11 Twin Cam 3.80BPR4ES-112 For 84-99 80” Evolution 2.60DCPR7E For 86-11 XL 3.80DCPR8E For 02-11 VRSC 3.801 Hotter plug. 2 Cooler plug.

SPARK PLUGS•Superior construction for serious power

•Versatile plugs with wide operating heat ranges prevent fouling from running too cool and pre-ignition from running too hot

•Features include high alumina ceramics for improved heat dissipation and electrical insulation, deep-seated copper core for a wider heat range and a nickel alloy tip for longer life

PART # PLUG # DESCRIPTION SUG. RETAILDCPR7EIX DCPR7EIX For 99-11 Twin Cam $10.50BPR5EIX-11 BPR5EIX-11 For 84-00 Big Twin 10.50DCPR7EIX DCPR7EIX For 86-11 XL 10.502103-0009 KR8AI For 06-11 V-Rod 11.50

IRIDIUM IX SPARK PLUG•The ultimate in spark plug technology and performance from the industry leader

•The iridium electrode is 25% smaller than a platinum electrode, and it’s just 1/4 the size of a conventional nickel electrode

•Ultra-small diameter center electrode reduces voltage requirement and extends ignition system life

•New metal shell plating has enhanced anticorrosion qualities

PART # DESCRIPTION SUG. RETAIL2103-0084 For 99-11 Twin Cam, 86-11 XL, 94-07 Buell $9.952103-0083 For 84-00 Evolution 9.95

E3 SPARK PLUGS•Unique electrode shape maximizes the power created by the spark plug – Diamond Fire technology

•Electrode is a combination of performance and technology that results in an improved flame kernel shape

•This flame front ignites the bulk air/fuel mixture faster, moves heat into the combustion chamber faster and creates a more localized pressure front for faster pressure rise during the cylinder power stroke

•The result is more complete combustion and an improvement in engine performance•A truly premium performance plug•Sold each

PART # FITS MODEL SUG. RETAIL2103-0071 For 99-11 Twin Cam $9.952103-0072 For 84-00 80” Evolution 9.952103-0071 For 86-11 XL 9.952103-0070 For 02-11 VRSCA/B V-Rod 9.952103-0099 For 09 Buell 1125R/CR 9.952103-0071 For 94-07 Buell models 9.95

XTREME SPORT SPARK PLUGS•More focused ignition to prevent fouling than leading standard plug

•.6mm finewire design with Sport V-trim ground electrode engineered to offer improved ignitability and durability over a standard plug

•Up to 26% quicker starts than leading standard plug•More horsepower and better fuel efficiency than standard plug

•Meets or exceeds OEM Design

PART # FITS MODEL SUG. RETAILAU-4164 For 99-11 Twin Cam $2.90AU-4265 For 84-00 80” Evolution 2.95AU-4164 For 86-11 XL 2.902103-0069 For 02-11 VRSCA/B V-Rod 2.902103-0118 For 09 Buell 1125R/CR 2.90AU-4164 For 94-07 Buell models 2.90

SPARK PLUGS•Designed for a sharper, leaner spark with tapered nickel/chrome alloy tip and copper center electrode


IRIDIUM PART # NGK REFERENCE # DESCRIPTION SUG. RETAILIXU22 DCPR7E For 99-11 Twin Cam, 86-11 XL $10.95IXU241 DCPR8E For 99-11 Twin Cam, 86-11 XL 10.951 Cooler plug.

IRIDIUM SPARK PLUGS•Six times harder than platinum, iridium doesn’t melt in temperatures up to 4,000°F (2,204°C)•Because the plug’s iridium electrode can shrink to only 0.4mm, voltage requirements decrease while firing performance improves

•360° laser welding of electrode provides a seal that resists wear even in the worst conditions•Ground electrode features a tapered cut and U-groove that form a large volume area for the flame’s center•Use NGK reference chart to order and stock these plugs


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

601

PART # DESCRIPTION SUG. RETAILBLACK2102-0059 5 ohm/points ignition/dual fire $49.952102-0060 3 ohm/electronic ignition/dual fire 49.952102-0063 2.4 ohm/electronic ignition/single fire 89.952102-0064 0.5 ohm 99-06 Twin Cam (except 99-01 FLHT)/

04-06 XL carb only/single fire 84.95

PART # DESCRIPTION SUG. RETAILCHROME2102-0061 5 ohm/points ignition/dual fire $52.952102-0062 3 ohm/electronic ignition/dual fire 52.95

IGNITION COILS•Performance, quality and value•35,000-40,000V output for all 70-06 ignitions•Available with black or chrome body

2102-0059

2102-0060 2102-0063

2102-0064

2102-0061

2102-0062

PART # DESCRIPTION SUG. RETAILDS-325479 2.7-ohm coil for models w/ electronic ignition

(except models w/ single-fire ignitions) $96.95

BLUE STREAK® IGNITION COIL•Feature 45,000V+ capacity for superior spark

•Heavy-duty construction for long life•Super-fast rise time for better response•Bolts directly to stock coil bracket•Not for single-fire ignitions

NOTE: Not for Twin Cam applications.

PART # DESCRIPTION SUG. RETAILDS-325689 Dual-fire compact ignition coil $67.95

DUAL-FIRE DUAL-TOWER COMPACT IGNITION COIL•Three-ohm 12V coil features a closed-core design for greater efficiency

•Produces far greater energy in a small package than other popular high-performance coils

•Can be used with any Compu-Fire ignition system or any ignition that calls for a 3-ohm coil (except Dyna S and points-type ignitions)

•Sold each•Made in the U.S.A.


PART # DESCRIPTION SUG. RETAIL2102-0071 Left coil $78.952102-0072 Right coil 78.95

2.5 OHM SINGLE-FIRE COILS•Molded-case design with 2.5 ohms primary resistance and produce 100 millijoules of spark energy

•Long-duration spark produces maximum torque for today’s large-displacement high-performance V-Twin engines

•21/8” o.c. holes, case allows for easy mounting in tight locations using aftermarket coil bracket kits



2102-0072

2102-0071

PART # DESCRIPTION SUG. RETAIL2102-0078 For Twin Tec and other aftermarket applications;

Street Legal A.R.B. E.O. No. D-641-2 $96.95

SINGLE-FIRE COIL•High-output single-fire coil•3-ohm primary coil is compatible with all Twin Tec and most aftermarket single-fire ignitions

•2.5” o.c. mounting holes


PART # DESCRIPTION SUG. RETAIL7805-3031 For 99-06 Twin Cam

carbureted models and 04-06 XL models (except 99-01 FLHT); (repl. OEM #31655-99) $96.95

HIGH-OUTPUT IGNITION COIL•OEM single-fire design; 45,000V•Designed for aftermarket and OEM ignitions

PART # DESCRIPTION SUG. RETAILFOR 84-99 EVOLUTION BIG TWIN SINGLE-FIRE APPLICATIONS2102-0079 Mini-coil kit $118.952102-0080 Mini-coil (ea.) 59.95

SINGLE-FIRE MINI IGNITION COIL KIT•Miniature coil intended for custom motorcycles where space is at a premium and a single-fire coil is required for maximum performance

•3-ohm primary is compatible with Twin Tec ignitions and most newer aftermarket single-fire ignitions

•Kit includes two coils, universal spark plug wire set, 90° and 135° spark plug boots and all required electrical terminals

•Coils also available separately (two coils required per application)

•Coil measures 2.4” L x 2.3” H x 1.6” W; weight is 7 oz.

NOTE: California A.R.B. E.O. No. D-641-2.

2102-0079

2102-0080


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

602

PART # COLOR DESCRIPTION SUG. RETAIL2102-0132 Chrome Dual-fire w/ electronic ignition (2.3 ohm) $125.952102-0133 Chrome Single-fire w/ electronic ignition (3.0 ohm),

except XL, 1200S 147.957805-1041 Yellow Single-fire w/ electronic ignition (3.0 ohm),

except XL, 1200S 137.95140407 Yellow Dual-fire w/ electronic ignition (2.3 ohm) 116.952102-0106 Black Dual-fire w/ electronic ignition (2.3 ohm) 116.952102-0107 Black Single-fire w/ electronic ignition (3.0 ohm),

except XL, 1200S 137.95

HEI “SUPER COILS”•12V “Super Coils” feature a unique look to match their high-tech performance and state-of-the-art reliability

•Eye-catching chrome, bright yellow color and black color•Available for electronic ignitions•Will not fit F.I. models or Twin Cam applications

2102-0132

7805-1041

2102-0107

PART # DESCRIPTION SUG. RETAIL140403 Two-coil $210.95140403S One-coil 116.95

UNIVERSAL “SUPER COIL” KITS•Extremely high output and available in one- and two-coil versions

•12V, 3 ohm coils ideal for custom and dual-plug applications; each comes with 9mm yellow plug wires

NOTE: Not for use with CDI ignitions or Twin Cam applications.

140403S

140403

PART # DESCRIPTION SUG. RETAILDC6-5 Twin Fire II Miniature, dual

output towers $149.95

TWIN FIRE II COIL•Single fire just got easier•High-technology materials now make it possible to put two coils in the same space as the stock coil with greater output

•No exposed laminations to rust and degrade performance

•High voltage and primary terminals machined from brass

•High-impact thermoplastic housing is ultrasonically welded and sealed against moisture

•Compact size fits easily under stock covers•Peak gap current in excess of 50mA•Over 40,000V per output•Rated at 3 ohms; accepts 7 to 8mm wires•Made in the U.S.A.


NOTE: Not for use with DS6-2 ignition system.

PART # DESCRIPTION SUG. RETAILDC6-4 Twin Fire, four output towers $154.95

TWIN FIRE COIL•Design incorporates two individual performance ignition coils into a single, easy-to-mount package that is only slightly larger than the stock coil and uses the stock mounting bracket

•Delivers spark voltage in excess of 30,000V with fast rise times and high energy

•For all single-fire, dual-plug head applications•Can be used with any electronic advance ignition system that incorporates dwell control, but cannot be used with the DS6-2 Dyna S or similar ignitions

•All coils are rated at 3 ohms•Made in the U.S.A.



RETAIL2102-0141 For 99-06 Twin

Cam carbureted models and 04-06 XL models (except 99-01 FLHT); repl. OEM #31655-99 $149.95

0.5 OHM DUAL-OUTPUT COIL•Designed for aftermarket and OEM ignitions


PART # DESCRIPTION SUG. RETAILFOR CARBURETED 99-06 TWIN CAM, 04-06 XL MODELS2102-0023 Dual output (pr.) $159.952102-0024 Dual output (ea.) 99.952102-0025 Single output (pr.) 159.952102-0026 Single output (ea.) 99.95

0.5 OHMS MINIATURE COILS•Designed for use with the Dyna TC88 series ignitions or factory-installed electronic ignitions that use low-resistance coils

NOTE: Must not be used with ignitions that are not specifically designed to use low-resistance coils.

2102-0023 2102-0025


RETAIL2102-0001 3 ohm, dual tower coil, single fire, dual plug (pr.) $159.952102-0003 3 ohm, dual tower coil, dual fire, single plug (ea.) 99.952102-0002 3 ohm, single tower coil, single fire, single plug (pr.) 159.952102-0004 3 ohm, single tower coil, single fire, single plug (ea.) 99.95

MINIATURE SERIES COILS•One of the smallest packages delivers high output with advanced magnetic core technology

•Designed for use with Dyna 2000 and 3000 series ignitions, factory-installed electronics, or with aftermarket ignitions that employ dwell control

•Secondary resistance is 11.5 ohms•Great for customs where coils need to be hidden


NOTE: Not for use with the Dyna “S”, DYNA III or earlier generation ignitions.

2102-00012102-0003 2102-0004

COILS•The “industry standard” with 35,000V spark energies second to none

•Designed to work with any Dyna ignition system•Can be used for single- or dual-plug applications•Made in the U.S.A.


PART # DESCRIPTION SUG. RETAILDC10-1 5 ohm (black), angled single output street

application (pr.) $154.95DC3-1 3 ohm (green), angled single output, for use with

DS-62 single-fire ignition only race application (pr.) 154.95DC2-1 1.5 ohm (brown), angled dual output (pr.) 154.95

PART # DESCRIPTION SUG. RETAILDC1-1 3 ohm (green), angled dual output (pr.) $154.95DC6-1 3 ohm (green), straight dual output, Std. H-D style

(85-up electronic ignition) (ea.) 79.95DC8-1 5.0 ohm (black), angled dual output (points) (pr.) 154.95

DC10-1

DC3-1

DC2-1

DC1-1

DC6-1

DC8-1


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

603

DUAL-COIL MOUNTING SYSTEM WITH BILLET COVERS•Mounting system features a chrome billet aluminum ball-milled design cover

•Coil brackets accept most single- or dual-tower end-mount coils

•Coil mounting position allows wires to exit near the center of the covers

•Attaches to the top motor mount and bottom motor case stud with supplied mounting hardware


DUAL-COIL MOUNTING SYSTEM•Designed for mounting the popular Dyna end-mount coils in dual-coil applications (coils not included)

•Bracket assembly made of billet steel and aluminum

•Decorative chrome cover conceals bracketry and coils•All required mounting hardware is included•Made in the U.S.A. by Custom Cycle Engineering

HIGH-OUTPUT SINGLE-FIRE COIL•The perfect complement for the S&S IST ignition system

•This single-fire coil is actually two separate coils in a single package

•Works well with any single-fire ignition system•Not compatible with the S&S Variable Fuel Injection System•Designed for 3 ohm coils•Made in the U.S.A.


PART # DESCRIPTION SUG. RETAILDS-242311 3-ohm compact dual-fire coil $103.95DS-325486 3-ohm OEM-style dual-fire coil 103.95DS-325487 3-ohm single-fire coil pack 172.95

PART # DESCRIPTION SUG. RETAILDS-243089 3-ohm single-fire coil (fits stock bracket and cover) $184.952102-0007 0.5-ohm coil for 99-06 carbureted Twin Cam and

04-06 XL (fits under stock cover) 136.95

12V COILS•3-ohm coils feature extra-long high-voltage towers to increase resistance to arc over

•Closely spaced electrical terminals make for cleaner hookup•Can be used with Crane HI-4 and HI4-E ignitions plus other aftermarket systems•PART # 2102-0007 is a 0.5-ohm coil, for use with OEM ignition or Crane PART #7806-1491 single-fire ignition

NOTE: Not for fuel-injected models or Twin Cam models unless noted.

PART # DESCRIPTION SUG. RETAIL2102-0021 3 ohm single-fire coil $138.95

PART # DESCRIPTION SUG. RETAILDS-326160 Single-tower, single-fire $86.95DS-326161 Dual-tower, dual-fire 89.95

PRO-FIRE™ 12V IGNITION COILS•Small size allows placement just about anywhere; perfect for dual coil setups

•Two Pro-Fire 3-ohm coils are about the same size as one stock coil•Provide over 45,000V through entire rpm range•Coils are sold each

NOTE: Coils are to be used with the following ignitions only: Dyna 2000, Compu-Fire Elite 1, RevTech Digital, Crane HI-4, Screaming Eagle and OEM H-D ignitions. Not for Twin Cam or point-style ignitions.

PART # DESCRIPTION SUG. RETAILDS-376580 For 91-99 FXST/FLST, 91-98 Dyna Glide

and 91-98 FLT models $214.95

PART # DESCRIPTION SUG. RETAILDS-325451 Single-plug system for 84-94, 99 FXR $183.95

PART # DESCRIPTION SUG. RETAILDS-376616 For use w/ PART #DS-325627 (dual coil bracket

for 84-99 FXST/FLST and 91-98 Dyna Glide) $112.95

STAINLESS STEEL COIL COVERS FOR DUAL COIL BRACKETS•Stainless steel coil covers are precisely formed, welded and then polished to a gleaming finish

•Fit in conjunction with Yankee Engineuity’s aluminum coil brackets


DS-242311 DS-325486 DS-325487

DS-243089

DS-326160

DS-326161

PART # DESCRIPTION SUG. RETAIL2102-0129 Chrome $109.952102-0130 Black 99.95

TOP MOTOR MOUNT COIL MOUNT•Fits Drag Specialties top motor mount PART #s DS-243606, DS-243607

•Also fits any top motor mount with 2” on-center 1/4” mount holes

•Accepts Dyna end-mount ignition coils, PART #s DC10-1, DC3-1, DC2-1, DC1-1 or DC8-1

•Keyhole is machined to fit ignition/starter switch PART #2106-0016; also fits ignition switch PART #DS-272114

•Includes four stainless steel button-head mount bolts with the heads turned down


2102-0129

2102-0130

2102-0007

PART # DESCRIPTION SUG. RETAILDS-325626 Dual mount for 84-94, 99 FXR and 85-86 4-speed

models w/ Dyna or Andrews end-mount-style coils $139.95DS-325627 Dual mount for 84-99 FXST, FLST, FLSTF w/ Dyna or

Andrews end-mount-style coils 146.95

SUPER-HEAVY-DUTY ALUMINUM DUAL COIL BRACKETS•Super-heavy-duty billet aluminum coil brackets with a highly polished finish

•Available for use with a stock configuration coil or with end-mount coil styles, such as Dyna “S” or Andrews coils (which are popular for dual coil installations)


NOTE: These mounts will not accept factory coil covers.

DS-325627

DS-325626


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

CHROME COIL COVER•Covers OEM and most aftermarket OEM-style coils in highly visible stock locations

•Mounts with OEM hardware•Includes cover for the top and back side of coil on XL model

•Not for fuel-injected models or 1200S

SMOOTH COIL COVER•Clean chrome style•Covers coil when mounted in stock location

LOUVERED COIL COVER•Chrome-plated and accented with five louvers for a truly custom appearance

COIL COVER•Brilliant chrome finish

CHROME COIL COVERS•Feature chrome steel body with black mesh inset or black powdercoat body with chrome mesh inset

•Available in Maltese Cross, Flame and Skull designs

COIL COVER BRACKET•Repositions the stock coil cover when mounting a Dyna Twin Fire Coil

•Stamped steel with a cadmium-plated finish•Made in the U.S.A.

604

PART # DESCRIPTION SUG. RETAIL2102-0077 For 04-06 XL $33.95

PART # DESCRIPTION SUG. RETAILDS-376601 For 84-99 FXST, FLST $17.95

CHROME COIL MOUNT BRACKET•Chrome-plated steel bracket; simple bolt-on assembly

•Includes ignition switch mount•Replaces OEM #31740-04, 31755-04

SEE-THROUGH COIL COVER•Chrome die-cast aluminum•Features five see-through grooves•Will also fit custom applications where OEM-style coil is mounted off the top motor mount

•Comes with mounting bolts and support strap

PART # DESCRIPTION SUG. RETAIL1406001 Coil cover bracket for

84-06 Softail models $11.95

PART # DESCRIPTION SUG. RETAILDS-376610 For 84-99 FXST, FLST $16.95

PART # DESCRIPTION SUG. RETAILDS-373605 For 84-94, 99 FXR $17.95

PART # DESCRIPTION SUG. RETAILCHROME2102-0171 Maltese Cross $26.952102-0172 Flame 26.952102-0173 Skull 26.95BLACK2102-0174 Maltese Cross 26.952102-0175 Flame 26.952102-0176 Skull 26.95

FOR 84-99 FXST, FLST

PART # DESCRIPTION SUG. RETAIL1902-0071 For 84-94, 99 FXR $38.95

PART # DESCRIPTION SUG. RETAIL2102-0065 For 84-08 FLT, FLHT

and 86-03 XL $22.95

PART # DESCRIPTION SUG. RETAILDS-376609 For 84-99 Softail $30.95

CHROME OLD-STYLE COIL COVER•An old-style look for bikes using OEM-style coils

•Sold individually

PART # DESCRIPTION SUG. RETAIL2102-0196 For 01-11 FXST/FLST

w/ fuel injection (except FXCW/C) $189.95

CHASING L.E.D. COIL COVER•Uses LED lighting to give the illusion of energy racing from the coil to the spark plug wire in time with engine

•Choice of red, lime, ice blue, sky blue, dark blue, purple or green LED displays; or colors can continuously morph from one hue to the next

•Can also be set for constant lighting (does not follow engine rpm)

•ABS construction with a chrome finish

PART # DESCRIPTION SUG. RETAIL7805-0078 For 00-06 Softail models

(carbureted); repl OEM #31606-00 $21.95

DS-376614 For 99-05 Dyna Glide models (carbureted); repl. OEM #31644-99 22.95

CHROME COIL COVERS•Smooth stamped steel construction

•Fits OEM-style coils

PART # DESCRIPTION SUG. RETAILFOR USE WITH CRANE DUAL-FIRE COIL PART #DS-242311 & COMPUFIRE COIL PART #DS-3258892102-0159 Smooth w/ logo $209.952102-0160 Stepped 209.95

COIL COVERS•CNC-machined from 6061 billet aluminum, then finished in chrome

•21/16” on center 5/16” mounting holes•Made in the U.S.A.


RETAILFOR 86-03 XL; REPL. OEM #66325-82DS-373680 Smooth chrome cover $13.95DS-373695 Chrome “Live to Ride” cover 29.95DS-373696 Chrome/gold “Live to Ride” cover 49.95

IGNITION MODULE COVERS•Available in smooth, embossed with the Live to Ride/Eagle Spirit script and available in an all-chrome finish or a gold and chrome finish

•Sold each

2102-01712102-0173

2102-0175

7805-0078

2102-0159

DS-373680

DS-373695

DS-3736962102-0160

DS-376614


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

605

PART # DESCRIPTION SUG. RETAIL2101-0033 For carbureted 99-03 Twin Cam models $249.952101-0022 Programming kit 99.952101-0055 Computer-to-module cable for kit 2101-0022 59.95

DYNA 2000TC PROGRAMMABLE DIGITAL PERFORMANCE IGNITION MODULE•Single-fire, fully programmable performance ignition•Sixteen programmable advance curves in three groups: stock to slightly modified motors, heavily modified motors and insanely modified motors

•Eight rev limiter settings in 250 rpm steps from 5750-7250 rpm•All functions offer full digital accuracy•Compatible with stock and performance coils - less than 1 ohm resistance•Coil current constantly monitored to provide constant full-spark energy•Uses all stock sensors and connectors•Built-in reverse battery and spike protection•Data recording includes total engine hours, time wide-open throttle, longest time operating at wide-open throttle, max rpm, seconds near rev limit and number of engine starts

•PC programmability makes possible an eight-point, fully definable, wide-open throttle curve and a fully definable part-throttle curve, programmable rev limit in 50 rpm steps, 0-5 programmable dead-cranking revs, total of +/- 10° rear cylinder offset, programmable rev limiter, and security lock out (pin # activated)

•Made in the U.S.A.PART # DESCRIPTION SUG. RETAIL2101-0063 For carbureted 04-06

Twin Cam models $249.952101-0071 For 04-05 XL 249.95

DYNA 2000TC-3 DIGITAL PERFORMANCE IGNITION MODULE•Module has a single connector•Loaded with 16 different advance curves, giving engine builder a wide range of curves to work with

•Adjustable rev limiter allows the user to select a rev limit ranging from 5750 to 7500 rpm in 250 rpm steps


PART # DESCRIPTION SUG. RETAILSTANDARD PLUG-IN IGNITION MODULES2101-0034 For 04-06 Twin Cam and Sportster carbureted

models w/ a single 12-pin connector $304.95DS-242377 For 99-03 Twin Cam carbureted models w/ two

6-pin connectors 304.952101-0219 For 99-03 Twin Cam carbureted models w/ two

6-pin connectors (two-stage rev limiter) 304.952101-0202 For 04-07 American Iron Horse models 332.95CALIFORNIA A.R.B. APPROVED PLUG-IN IGNITION MODULES2101-0218 For 04-06 Twin Cam and Sportster carbureted

models w/ a single 12-pin connector 304.95

PART # DESCRIPTION SUG. RETAILCALIFORNIA A.R.B. APPROVED PLUG-IN IGNITION MODULES (CONT)2101-0217 For 99-03 Twin Cam carbureted models w/ two

6-pin connectors $304.95OPTIONAL ACCESSORIES1022-0007 12V power adapter for bench programming

with USB interface (North American use w/ 120 AC only) 106.95

2101-0075 USB interface 99.950807-0002 12V power adapter 106.95

PLUG-IN IGNITION MODULES•Features two advance curve families that are adjustable to accommodate stock and modified engines•Selectable multi-spark mode for quick starting and smooth cruising•Five rotary switches for mode select, timing adjustments, advance slope and rpm limit (in 100 rpm steps)•Coil outputs protected against short circuits•Requires OEM coils with less than 1 ohm primary resistance and low-resistance spiral-core or carbon-core suppression-type plug wires•12V power adapters are used to power up the modules when removed from the bike (sold separately)•Optional USB interface and software available for programming (programs available on web site www.daytona-twintec.com/index.html) custom curves•Easy-to-follow instructions included•Made in the U.S.A.

NOTE: Will not work on fuel-injected models.

NOTE: Standard not legal for sale or use on pollution-controlled vehicles.

NOTE: A.R.B. E.O. No. D-641-1.

PART # DESCRIPTION SUG. RETAILDS-243068 7-pin adapter to 8-pin module $42.95

PART # DESCRIPTION SUG. RETAILDS-243069 8-pin adapter to 7-pin module $43.95

IGNITION MODULE ADAPTERS•Adapters allow the use of a seven-pin module (91-93) going to an eight-pin Deutsch (94-99) wiring harness or an eight-pin module going to a seven-pin harness


NOTE: Will not work for fuel-injected models.

2101-0033 2101-0022

2101-0055

2101-0063

2101-0071

2101-0034DS-242377

0807-0002

2101-0075

DS-243068

DS-243069


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10FIREBALL® HI-4TC PERFORMANCE IGNITION MODULES•A choice of 10 advance curve families, all easily selected by a rotary switch – choose from factory stock to wildly modified for custom engines

•Installs in place of OEM module with plug-in installation•Generates up to nine sparks at idle and up to three sparks at 6000 rpm•PART #7806-1491 has a digitally set rev limiter that is adjustable from 1500 rpm to 9900 rpm in 100 rpm increments

•PART #2101-0073 has a digitally set rev limiter that is adjustable from 3000 rpm to 9900 rpm in 100 rpm increments•True single fire – rear cylinder timing can be offset from -5° to +4°; initial timing is set from -5° to +4° and is easily adjustable•Works with stock security system•Bank angle sensor maintains stock functions•Customize advance curves and optimize ignition timing for radical head configurations, custom pipes, big-bore kits, cams and other performance modifications

•Optional software allows the ignition module to be programmed on or off the bike•Software has easy editing options and built-in diagnostics to allow for easy troubleshooting•Compatible with Pentium 75 and faster processors running Windows 95 or later operating systems•Ignition curves can also be custom-programmed with HI-4TC PowerLink programming software (sold separately)

606


RETAIL2101-0073 For 04-06 Twin Cam and XL

models w/ carburetor $381.957806-1491 For 99-03 Twin Cam

models w/ carburetor 381.95

GUARDIAN DIAGNOSTIC SYSTEM™•Offers engine builders and tuners some powerful tools to use with the S&S IST ignition module•Contains a software CD for PCs, a translator unit, and two cables that connect the translator to the COM port of your PC and to the data link on the motorcycle wiring harness

•Once connection between the computer and IST module is made, the software allows access to new functions and diagnostic data

•These functions allow you to, among other things: turn “on” the break-in “Rev” limit function to protect a new or rebuilt engine from over-revving during break-in; adjust the final rev limit; look at diagnostic test codes; look at live data for both cylinders while the engine is running (e.g., rpm, manifold absolute pressure, engine temperature, battery voltage, spark timing, etc.); look at a wide range of history information; and calibrate the speedometer in 04-06 models

•Includes software, translator unit and cables•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2101-0131 Guardian Diagnostic System kit $373.95

INTELLIGENT SPARK TECHNOLOGY (IST) IGNITION SYSTEM•The S&S system makes use of crank position sensor, cam position sensor if present, MAP sensor, cylinder head temperature sensor and an exclusive knock sensor that detects detonation or knock while the engine runs

•Knock sensor allows the ECU to automatically adjust ignition timing to eliminate knock whenever it occurs•Optimizes power and fuel economy•The Intelligent Spark Technology Ignition Module requires an installation kit that must be purchased separately•Optional high-output coil also available: designed for the S&S Variable Fuel Injection System, the single-fire coil is actually two separate coils in a single package; coil impedance 3 ohm per coil (sold separately)


NOTE: Not for fuel-injected models.

NOTE: Not recommended for kick start applications unless a cam position sensor is used. Engines using crankshaft position sensors will be difficult to kick start.

NOTE: S&S IST ignition modules manufactured after 10-1-03 (serial number begins with “E” or higher letter) already contain software to support the Guardian Diagnostic System. These modules will work in all applications except 2004-’05. Modules manufactured after 10-1-05 (serial number begins with “G” or higher letter) are compatible with 04-05 models in addition to the other specified applications.

PART # DESCRIPTION SUG. RETAIL2101-0079 S&S Intelligent Technology Ignition Module $410.95

MODULE

INSTALLATION KITS

REPLACEMENT PARTS FOR INSTALLATION KITS

PART # DESCRIPTION SUG. RETAIL2101-0080 For 04-05 Twin Cam $202.9555-1012 For 99-03 Twin Cam 186.9555-10491 For 94 FLT models, 95-99 carbureted Big Twin,

95-97 XL, 95-96 Buell S2/S2T, 96-98 S1, 97 S1W, 97-98 S3/S3T, 97-01 M2 698.95

PART # DESCRIPTION SUG. RETAIL55-1050 For S&S Super Sidewinder Plus $314.952120-0083 For 04-06 XL 213.951 Pre-95 Big Twin models require minor wiring harness modifications.

PART # DESCRIPTION SUG. RETAIL55-1039 Cylinder head temp. sensor for Evolution $43.9555-1014 Cylinder head temp. sensor for Twin Cam and Super

Sidewinder Plus (OEM 32446-99) 23.95

PART # DESCRIPTION SUG. RETAIL55-1015 Knock sensor kit $58.9555-1051 Crank position sensor 66.9555-1037 MAP sensor (OEM #32316-99) 46.95

2101-0073

7806-1491

2101-0079

55-1012

55-1049 55-1050

2120-0083


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

607

PART # DESCRIPTION SUG. RETAIL2101-0045 L94-98 FLT/FLHT, 96-99 FXST/FLST, 96-98 FXD/FXDWG and 94-97 XL single- or dual-fire system (w/ 8-pin) $249.952101-0046 L94-98 FLT/FLHT, 96-99 FXST/FLST, 96-98 FXD/FXDWG and 94-97 XL dual-fire system (w/ 8-pin) 200.952101-0043 91-E94 FLT/FLHT, 91-95 FXST/FLST, 91-95 FXD/FXDWG and 90-93 XL single- or dual-fire digital system (w/ 7-pin) 249.952101-0044 91-E94 FLT/FLHT, 91-95 FXST/FLST, 91-95 FXD/FXDWG and 90-93 XL dual-fire digital system (w/ 7-pin) 199.951009001 Dyna 2000 electrical harness extension (84-90 Big Twin models) 69.951009002 8-pin to 7-pin harness adapter (94-up Evolution models) 39.952101-0205 Programming kit w/ USB connection 99.95

2000-HDE PC-PROGRAMMABLE DIGITAL IGNITION MODULES•A plug-in upgrade to the electronic advance ignition found on late model Harleys, these ignitions are micro-computer controlled, generating extremely accurate control over the entire ignition process

•Allows riders to tailor the advance curve and rev limiter to the specific needs of their particular engine; four built-in advance curves cover the needs of stock to highly modified engines over a variety of operating conditions; four independent rev limiter choices from 6000 to 7500 rpm set the exact protection level needed

•PC programmability allows you to define a wide-open and part-throttle curve, rev limits, dead-cranking revs and rear cylinder offset•PART #2101-0045 comes with 8-pin connectors; operates in single-fire or dual-fire modes•PART #2101-0046 comes with 8-pin connectors; operates in dual-fire mode only•PART #2101-0045 and 2101-0046 offer a quick curve which simulates a mechanical advancer for hot rod motors; option to use vacuum advance compensation via a VOES switch and retard mode, which allows selection of ignition retard of 5°, 7° or 10° upon activation of a retard input

•PART #2101-0044 is for use with a dual-fire ignition only; it simply plugs right into your 7-pin stock harness and mounts right in the original ignition mounting area

•PART #2101-0043 comes with a 7-pin connector; can be used with either one ignition coil firing both cylinders (dual fire), or with two ignition coils, one firing each cylinder (single-fire); no other ignition offers this flexibility

•A separate tach output wire allows clean tach operation during rev limiting and when in single-fire mode•A diagnostic LED indicator is included on the back of the control module to assist trouble shooting and static timing•Made in the U.S.A.

IMPORTANT NOTE: On any electronic advance ignition such as the Dyna 2000-HD1 or the stock Harley ignition, you must use carbon fiber-type suppression spark plug wires to reduce radio frequency interference. Use of copper wires may cause malfunction of the ignition due to severe electrical noise generated at the spark plugs. The original wire supplied by Harley-Davidson should be okay.


NOTE: HDE systems are not compatible with Dyna “S” systems. Use HD1/HD2 systems only.

PART # DESCRIPTION SUG.RETAIL2101-0210 For 91-E94 FLT/FLHT, 91-95 FXST/FLST, 91-95 FXD/FXDWG and 90-93 XL w/ 7-pin Cannon plug $304.952101-0211 For L94-98 FLT/FLHT, 96-99 FXST/FLST, 96-98 FXD/FXDWG and 94-97 XL w/ 8-pin Deutsch plug 304.952101-0075 USB interface 99.952101-0130 12V power supply (110/240 VAC multi-plug international compatibility) 69.95

EXTERNAL PLUG-IN IGNITION MODULES•Feature two advance curve families that are adjustable to accommodate stock and modified engines

•Selectable multi-spark mode for quick starting and smooth cruising

•Unit has four rotary switches for timing adjustments, single/dual ignition mode and rpm limit (100 rpm steps)

•Coil outputs protected against short circuits•Requires coils with a minimum of 3 ohms resistance and low resistance spiral-core type plug wires

•Uses the tachometer wire for the PC-link and comes with a connector•Optional USB interface and software available for programming custom curves (programs available on web site www.daytona-twintec.com/index.html)

•12V power adapter is used to power up the ignition system when removed from the bike and for installing new maps (sold separately)



PART # DESCRIPTION SUG. RETAILDS-242335 7-pin ignition module for 91-E94 FLT/FLHT, 91-95 FXST/FLST, 91-95 FXD/FXDWG and 90-93 XL $346.95DS-242336 8-pin ignition module for L94-98 FLT/FLHT, 96-99 FXST/FLST, 96-98 FXD/FXDWG and 94-97 XL 346.95

HI-4E SINGLE-/DUAL-FIRE MULTI-SPARK IGNITION MODULES•Low-profile black anodized billet aluminum housing•Replace OEM module•Feature selectable multi-spark mode, which generates up to nine sparks at idle and three sparks up to 6000 rpm

•Can be used with any single- or dual-fire coil with 2.5-ohm or greater resistance•Digitally set rev limiter adjusts from 500 to 9900 rpm in 100-rpm increments•A choice of two advance curves: stock with VOS or modified without VOS•Advance slope of either curve can be adjusted in 10 steps via a rotary switch•Rear cylinder timing can be set digitally from -5° to +4°•Operating voltage of 4-18V with reverse polarity protection


2101-0045

2101-0043

DS-242335

DS-242336

2101-0075

2101-0130

2101-0211


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

608

PART # DESCRIPTION SUG. RETAIL2101-0047 For 91-95 Softail/91-95 Dyna, 90-93 XL; 91-E94 FLT; 84-94 FXR (7-pin) $399.952101-0048 For 96-99 Softail, 96-98 Dyna, 94-97 XL; L94-98 FLT (8-pin) 399.952101-0205 Programming kit w/ USB connection 99.95

PC-PROGRAMMABLE SINGLE-FIRE IGNITION AND COIL KITS•Kit includes Dyna 2000 ignition module and Dyna Twin Fire coils•PC programmability allows you to define a wide-open and part-throttle curve, rev limits, dead cranking revs and rear cylinder offset

•Makes stocking and buying easy by combining parts matched to a specific bike•Dyna 2000 ignition has expanded advance curve functionality, a special retard mode for turbo-charged and nitrous bikes, selection between four advance curves, a quick curve which simulates a mechanical advancer for hot rod engines and four independent rev limiter choices from 6000 to 7500 rpm

•Dyna Twin Fire coils incorporate two performance coils into a single package that is only slightly larger than the stock coil and mounts easily to the stock mounting bracket; delivers spark voltage in excess of 30,000V with fast rise times and high energy


PART # DESCRIPTION SUG. RETAILSTANDARD IGNITION KITS2102-0022 For 04-06 Twin Cam and XL carbureted models w/ one 12-pin connector $461.952101-0032 For 99-03 Twin Cam carbureted models w/ two 6-pin connectors

(except 01 FLHT models) 402.95CALIFORNIA A.R.B. APPROVED IGNITION KITS2101-0216 For 04-06 Twin Cam and XL carbureted models w/ one 12-pin connector 461.952101-0215 For 99-03 Twin Cam carbureted models w/ two 6-pin connectors

(except 01 FLHT models) 402.95USB INTERFACE KIT2101-0075 For all ignition kits 99.95

IGNITION KITS•Modules feature two advance curve families with adjustable advance curves to accommodate stock and modified engines

•Unit has five rotary switches for timing adjustments, advanced slope and rpm limits

•Digitally set rpm limiter (in 100 rpm steps)•Selectable multi-spark mode for quick starting and smooth cruising

•Coil outputs protected against short circuits•Optional USB interface and software available for programming custom curves (programs available at http://www.daytona-twintec.com/index.html)

•Kit for 04-06 Twin Cam and Sportster models includes a 12-pin ignition module, software, USB-INTF interface, coil and spark plug wires


NOTE: Standard models not legal for sale or use on pollution-controlled vehicles.

NOTE: A.R.B. E.O. #D-641-1.

PART # DESCRIPTION SUG. RETAIL2101-0070 For carbureted 01-06 Twin Cam models $313.95

TWIN CAM STAND-ALONE IGNITION SYSTEM•Designed for use in custom applications where a Twin Cam motor and crank sensor are used

•Complete ignition system includes module, coil, wires, Smart Link software, communication cable and instructions (no Harley factory harness required)

•Consolidates ignition components into a small, easy-to-mount package•Integrated high-output single-fire operation•Fully programmable spark timing and rev-limit setting•Real-time diagnostic features aid in troubleshooting and tuning•Uses factory crank trigger for improved starting and performance•Rugged billet aluminum housing is weather- and vibration-resistant•Custom mounting with 1/4”-20 bolts, 2” apart

PART # DESCRIPTION SUG. RETAIL2101-0214 For L94-98 FLT/FLHT, 96-99 FXST/FLST, 96-98 FXD/FXDWG and 94-97 XL models w/ 8-pin Deutsch plug $402.952101-0213 For 91-E94 FLT/FLHT, 91-95 FXST/FLST, 91-95 FXD/FXDWG and 90-93 XL models w/ 7-pin Cannon plug 402.952101-0075 USB interface kit 99.95

EXTERNAL MODULE IGNITION KITS•Kit includes ignition module, single-fire coil, 8.5mm spark plug wires and instructions

•Two advance curve families with adjustable advance curves to accommodate stock to wild engine modifications

•Unit has four rotary switches for adjusting timing, single/dual fire, rpm limit and two LED indicator lights

•Digitally set rpm limit (in 100 rpm steps); selectable single- or dual-fire mode

•Selectable multi-spark mode for quick starting and smooth cruising•Coil outputs protected against short circuits•Optional USB interface and software available (programs available on web site http://www.daytona-twintec.com/index.html) for programming custom curves

•Kit uses the tachometer wire for the PC-link and comes with a connector•Made in the U.S.A.

NOTE: California A.R.B. E.O. #D-641-1.

2101-0047

2101-0216

2101-0215

2101-0075

2101-0214

2101-0075


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

609

IGNITION AND COIL KITS•Complete electronic ignition systems built with the latest state-of-the-art engineering•The same ignition used by top drag and road racers to set records and bring home victories over the past decade

•The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original advance unit, so the factory advance curve is maintained

•Coils provide spark voltages in excess of 30,000V and spark energies second to none•The DSK61 Dyna S and coil system includes a DC7-1 high energy coil•The DSK62 Dyna S and coil system is designed for single-fire applications; includes two DC10-1 Dyna coils


NOTE: Later models will require the use of a mechanical advance unit.

Callout

PART # DESCRIPTION SUG. RETAILDS-242449 8-pin ignition kit for L94-98 FLT/FLHT, 96-99 FXST/FLST,

96-98 FXD/FXDWG and 94-97 models $539.95DS-242450 7-pin ignition kit for 84-94 Big Twins (except FLT) 539.95

FIREBALL HI-4E SINGLE-FIRE IGNITION KITS•Kits include an HI-4E ignition module, a single-fire coil and plug wires

•Module features a selectable multi-spark mode with 10 advance curves and a digitally set rev limiter that adjusts from 500 to 9000 rpm

•Single-fire 3-ohm coil fits under the stock coil cover

•8.5mm plug wires have reactive core design with black silicone insulation

PART # DESCRIPTION SUG. RETAILFOR 84-99 CARBURETED MODELS (NOT FOR TWIN CAM, 1200S)2101-0027 Module only $249.952101-0028 Single-plug/single-fire kit (includes module and pair of DC3-1 coils) 399.952101-0029 Dual-plug/single-fire kit (includes module and pair of DC1-1 coils) 399.952101-0031 Single-plug/single-fire kit (includes module and DC6-5 Twin Fire II miniature coil) 399.952101-0012 Programming kit for 2101-0027, 2101-0028, 2101-0029 , 2101-0030 and 2101-0031 99.95

2000I PC PROGRAMMABLE ELECTRONIC IGNITION•Completely self-contained so entire unit hides under the cam cover for a clean look on custom bikes

•Single-fire operation down to zero rpm for easier cranking and kicking•Will operate in all combinations of single-fire or dual-fire with single-plug or dual-plug heads

•Ten advance curves cover a broad range of engine builds and riding styles•Engine over-rev protection, adjustable from 6000 to 7500 rpm•Adjustable timing retard for nitrous and turbo applications•VOES indicator lets you monitor VOES switch at a glance•Built-in tach driver can be used to activate shift lights, auto-shifters and other accessories

•Easy static timing with built-in timing indicator•Intelligent over-current/short-circuit protection•Active dwell control•Over-voltage protected against momentary spikes•Data recording includes total engine hours, time wide-open throttle, longest time operating at wide-open throttle, max rpm, seconds near rev limit and number of engine starts

•PC programmability makes possible an eight-point, fully definable, wide-open throttle curve and a fully definable part throttle curve, rev limit programmable in 50 rpm steps, programmable dead-cranking revs 0-5, rear cylinder offset, total of +/- 10°, programmable rev limiter, security lock out (pin # activated), single or dual fire

•Programming and downloading data and graphs from module requires proper programming kit (includes CD, cables and instructions)

•Pig-tail connector enables the user to connect the ignition to a PC to either download recorded info from the ignition or program their own power curves, rev limits, dead revs or rear cylinder off-set timing; connector remains on bike


NOTE: Programming kit is not necessary to use all selectable functions of the current ignition.

PART # DESCRIPTION SUG. RETAILDS-325770 For 84-99 Evolution Big Twin and 86-03 XL (except 1200S) $484.95

HI-4 SINGLE-FIRE IGNITION KIT•This complete kit offers aggressive ignition curves and dyno-proven power gains•Adjustable advance allows timing based on engine modifications, operating conditions and fuel•Built-in rev limiter adjusts from 4000 to 8000 rpm•Utilizes stock VOES unit when applicable•Single-fire coils are an innovative design with 3.0 ohms (fits under most stock coil covers)

•8.5mm spark plug wires feature spiral-core design with universal 90° plug caps•Kit comes complete with hardware•System utilizes an 84-98 OEM pick-up rotor; on pre-84 models you will need to purchase pick-up rotor PART #2101-0025


NOTE: If tach is inoperative after installation, you may require a Crane tach adapter DS-242304.

PART # DESCRIPTION SUG. RETAILFOR 84-99 BIG TWIN, 86-03 XL (EXCEPT TWIN CAM, 1200S)DSK61 Dual-fire ignition kit $189.95

PART # DESCRIPTION SUG. RETAILFOR 84-99 BIG TWIN, 86-03 XL (EXCEPT TWIN CAM, 1200S) (CONT)DSK62 Single-fire ignition kit $279.95

DS-242449

2101-0028 2101-0027

2101-0012

DS-242450

DSK61DSK62


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

610

PART # DESCRIPTION SUG. RETAILSTANDARD2101-0242 For 84-99 Big Twin/86-97 XL (mode switch position

9 can be used to set kickstart, single-fire race advance curves w/o use of the USB interface) $378.95

7806-1560 For 98-03 XL (except 1200S) 402.95

PART # DESCRIPTION SUG. RETAILCALIFORNIA A.R.B. APPROVED2101-0212 For 84-99 Big Twin/86-97 XL $378.95USB INTERFACE KIT2101-0075 For all kits 99.95

INTERNAL IGNITION KIT•Kit includes ignition system, 8.5mm spark plug wires, single-fire coil and instructions

•Ignition system has two advance curve families with adjustable advance curves to accommodate stock to wild engine modifications

•Four rotary switches for adjusting timing and single/dual fire rpm limit•Digitally set rpm limit (in 100 rpm steps), selectable single- or dual-fire mode•Selectable multi-spark mode for quick starting and smooth cruising•Coil outputs protected against short circuits•Optional USB interface kit and software (programs available on web site http://www.daytona-twintec.com/index.html) available for programming custom curves

•Requires the use of an OEM timing rotor (OEM #32402-83 or PART #2101-0234)•Uses the tachometer wire for the USB interface and comes with a connector•Made in the U.S.A.

NOTE: Standard models are not legal for sale or use on pollution-controlled vehicles.


SINGLE-FIRE “SUPER SYSTEM”•Kit features a programmable ignition module with adjustable rev limiter•Single-fire coil (3.0 ohms)•Accel U-groove spark plugs with black 8.8mm plug wires

PART # DESCRIPTION SUG. RETAIL7805-1039 For 84-99 Big Twin and 86-03 XL (except Twin Cam, 1200S);

use w/ OEM rotor #32402-83 (PART #2101-0025) $537.95

PART # DESCRIPTION SUG. RETAILDS6-1 For 94-99 Big Twin and 86-03 XL models w/ a mechanical advance unit $124.95DS-242298 Advance unit w/ bolt (ea.) 31.95

ELECTRONIC IGNITION SYSTEM•Perfect ignition timing once and for all•Self-contained ignition system features Hall Effect magnetic sensors, which are not sensitive to rpm changesor affected by dirt and oil

•Improves overall performance by changing the timing less than 3 degrees, extends plug life, eliminates the use of points and condensers; can be easily installed

•Used and endorsed by many championship racers•Made in the U.S.A.

NOTE: Not for Twin Cam.

NOTE: Not recommended for use with OEM coils.

FITMENT APPLICATION PART # SUG. RETAILDUAL-FIRE IGNITIONS (SEE DS6-1)W/ single plug heads Race only, 3 ohm (green) DC6-1 $79.95 (ea.)W/ dual plug heads Race/Street, 1.5 ohm

(brown) DC2-1 154.95 (pr.)SINGLE-FIRE IGNITIONS (SEE DS6-2)W/ single plug heads Street, 5 ohm (black) DC10-1 154.95 (pr.)

FITMENT APPLICATION PART # SUG. RETAILSINGLE-FIRE IGNITIONS (SEE DS6-2) (CONT)W/ single plug heads Race only, 3 ohm (green) DC3-1 $154.95 (pr.)W/ dual plug heads Race only, 3 ohm (green) DC1-1 154.95 (pr.)W/ dual plug heads Street, 5 ohm (black) DC8-1 154.95 (pr.)W/ dual plug heads Race only, requires two

coils, 3 ohm (green) DC6-1 79.95 (ea.)

APPLICATION CHART FOR DYNA COILS WHEN USING DYNA “S” IGNITION SYSTEMS

SINGLE-FIRE ELECTRONIC IGNITION SYSTEM•All the features of the famous Dyna “S”, plus the special feature of firing the front and rear cylinders independent of each other, allowing a much more accurate timing of each cylinder

•The stock ignition system fires both cylinders at the same time, which works fine for the front cylinder but the rear receives the “wasted” spark when the cylinder has started its intake stroke; this can result in harder starting, increased engine vibration, backfire and raw fuel being spit back into the carb, all creating a power loss

•Dyno and top-speed testing have shown a dramatic improvement in power in all areas; bikes with hotter cams show the greatest improvement

•If you truly want to get the most out of your stock, slightly modified or all-out customized Harley-Davidson, you need a Dyna “S” single-fire ignition system


NOTE: Not recommended for use with OEM coils.

NOTE: On 84-up Harley-Davidsons, an advance weight mechanism is required.

NOTE: This unit must be used with special Dyna coils; see coil chart for correct coils.

NOTE: Tach adapter is required when using an electric tach.

NOTE: Not for use on Twin Cam models.

PART # DESCRIPTION SUG. RETAILDS6-2 For 84-99 Big Twin/XL using a mechanical advance assembly $149.95DS-242298 Advance unit w/ bolt (ea.) 31.95D-101 Tach adapter 20.95

2101-0242

DS6-2

DC2-1

DC10-1

DC3-1

2101-0075

DS6-1


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

611

PART # DESCRIPTION SUG. RETAILSTANDARD INTERNAL IGNITION SYSTEMS2101-0241 For 84-99 Evolution Big Twin, 86-87 XL 1100 and 86-93 XL 883 (mode switch position 9 can be used to set kickstart,

single-fire race advance curves w/o using the USB interface) $276.952101-0209 For 84-99 Evolution Big Twin and 86-97 XL (two-stage rev limiter) 283.95DS-242373 For 98-03 XL (except 1200S) 304.95CALIFORNIA A.R.B. APPROVED INTERNAL IGNITION SYSTEM2101-0208 For 84-99 Evolution Big Twin, 86-87 XL 1100 and 86-93 XL 883 276.95ACCESSORIES2101-0234 Timing rotor; repl. OEM #32402-83 (includes mounting screw and washer) 6.952101-0075 USB interface kit 99.952101-0130 12V power supply (110/240 VAC multi-plug international compatibility) 69.95

INTERNAL IGNITION SYSTEMS•Features two advance curve families that are adjustable to accommodate stock and modified engines

•Selectable multi-spark mode for quick starting and smooth cruising•Four rotary switches for timing adjustments, single/dual ignition mode and rpm limit (100-rpm steps)•Coil outputs protected against short circuits•Requires coils with a minimum of 3 ohms resistance and low resistance spiral-core-type plug wires•Requires timing rotor OEM #32402-83 or PART #2101-0234•Uses the tachometer wire for the PC link and comes with a connector•Optional USB interface and software available for programming custom curves (programs available on web site www.daytona-twintec.com/index.html)


NOTE: Standard models are not legal for sale or use on pollution-controlled vehicles.


PART # DESCRIPTION SUG. RETAILFOR 84-99 BIG TWIN, 86-03 XL (EXCEPT TWIN CAM, XL1200S)DS-242313 Dual-fire ignition (4° advance capability) $267.95DS-242312 Single-fire ignition (not legal for pollution-controlled vehicles); capable of adjusting the rear cylinder timing +/-5° (9000 rpm limit) 298.95DS-242314 Single-fire ignition; California legal and has no rear cylinder timing adjustment (CARB E.O. #D-225-43) 298.952101-0025 Ignition rotor for all 84-99 Evolution engines; repl. OEM #32402-83 (except 1200S) 6.95

HI-4 IGNITION SYSTEMS•More power than stock systems, aggressive ignition curves and dyno-proven power gains

•Immediately fires the first cylinder on kickers and reduces “kickback” and strain on electric start systems

•Electronically adjustable advance allows timing based on engine modifications, operating conditions and gasoline; also utilizes stock VOES unit when applicable

•Sealed electronic protection circuits protect from over-temperature, short circuits, coil failure and wiring errors

•Fully adjustable rev limiter adjusts from 4000 to 8000 rpm; tach output accurate even at rev limits•Timing LED for static timing and diagnostic information•Can be used with single- or dual-plug heads (use suppression or spiral-core wires)•Spiral-core wires are recommended for maximum performance (do not use solid copper spark plug wires; they may cause interference with ignition system and accessories)

•Entire unit fits under the point cover on Evolution Big Twin and Sportster models•Systems utilize 84-99 80” Evolution OEM pick-up rotor•Coils must have at least a 2 ohm primary resistance•Ignition systems, coils and plug wires sold separately•Ignition rotor includes bolt and lock washer•Made in the U.S.A.

NOTE: Single-fire systems must use single-fire coils with at least 2 ohms of resistance.

NOTE: If tach is inoperative after installation of the HI-4, you may require a tach adapter. The HI-4 tach output is compatible with ground-sensing tachs (including most OEM and aftermarket tachs), but some tachs require a high-voltage trigger pulse. In this case, install Crane tach adapter DS-242304.

DS-242373

2101-0234

2101-0075

2101-0130

2101-0025

DS-242313 DS-242312


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

612

PART # DESCRIPTION SUG. RETAILFOR 84-99 EVOLUTION BIG TWIN AND 71-03 XL (EXCEPT FUEL-INJECTED MODELS)2101-0238 For electric start $349.952101-0239 For kick start 349.952101-0240 For race use w/ selectable retard 349.95

SINGLE-FIRE IGNITION SYSTEMS•Easy way to convert stock ignition systems to single-fire system

•Kits feature Compu-fire ignition module, high-output single-fire Fire coil which mounts in the stock location and under the stock coil cover, and a set of silicone-jacketed spiral-core spark plug wires

•Ignition modules feature eight pre-programmed advance curves•Tunable VOES adds 5 or 10 degrees vacuum advance•Easy installation with LED static timing light•Selectable rpm limiter from 6,000 rpm to unlimited•Made in the U.S.A.


RETAILFOR 84-99 BIG TWIN, 86-03 XL (EXCEPT TWIN CAM)DS-242319 For stock or slightly modified engines (works w/ VOES) $269.95DS-242333 For high-compression (10:1) engines (works w/ VOES) 269.95DS-242371 For stock or slightly modified engines w/ kick starter

(works w/ VOES) 269.95TACH ADAPTERDS-242332 Tachometer adapter for single-fire Compu-Fire ignitions 33.95

ELITE 1 IGNITION MODULES•All electronics mounted in the nose cone (timing cover)•Feature selectable advance curves (eight advance curves in either dual- or single-fire operation)

•Adjustable rpm limiter (eight rpm limits)•Dual-range VOES operation•Accu-Ray light for easy installation and check system•Must use tach adapter PART #DS-242332 with single-fire systems•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-242339 For 84-99 Big Twin

(except Twin Cam) and 86-03 XL (except 1200S) $269.95

ELITE 1 IGNITION MODULE•Super Sport Race variable-advance ignition module with variable retard for race engines with NOS system or turbocharger (without VOES)

•Module is completely contained in the nose cone (gear cover)

•Allows you to select advance curves; eight advance curves in either dual- or single-fire operation

•Adjustable rpm limiter (eight limits)•Accu-Ray light for easy installation and system check

•Must use tach adapter PART #DS-242332 with single-fire systems

•Made in the U.S.A.PART # DESCRIPTION SUG. RETAILORIGINAL COMPU-FIRE MODULE KITS ONLYDS-242324 Ignition module kit; dual-fire; two plug $115.95DS-242325 Ignition module kit; single-fire; two plug 136.95TACH ADAPTERDS-242332 Tachometer adapter for single-fire Compu-Fire ignitions 33.95

ORIGINAL COMPU-FIRE IGNITION MODULES•Built-in Accu-Ray timing light, correct dwell times and no external ignition module because electronics mount entirely inside ignition housing

•Rev limiter eliminated•Must use tach adapter PART #DS-242332 with single-fire modules


NOTE: Requires the use of a mechanical advance unit.

PART # DESCRIPTION SUG. RETAILDRL400HD Two-stage rev limiter $199.95

TWO-STAGE REV LIMITER•Precisely controls over-revving and launch rpm•Designed for the odd firing angle of Harley V-twins•Over-rev limit guarantees against damage due to missed shifts or drivetrain breakage; adjustable from 5500 to 9250 rpm

•Launch limit gives maximum off-the-line performance; adjusts between 2500 and 6250 rpm in 250 rpm increments

•Spares unnecessary poundings of expensive engine components•Made in the U.S.A.

NOTE: Not for Twin Cam.

2101-0238

DS-242319

DS-242324DS-242325

DS-242332

DS-242332

FOR 84-99 EVOLUTION BIG TWIN AND 86-03 MODELS


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

613

PROGRAMMABLE SHIFT LIGHT AND VEHICLE DATA LOGGER•Ultra-high-brightness red/green/blue LED display that can be panel mounted or attached to a tach with a supplied bracket

•The LED display features full spectrum color capability including white with user-selected colors for each function and automatic dimming under low light conditions

•Launch and multi-stage shift light capability. A launch rpm and up to five shift rpm levels can be defined to support up to six-gear transmissions

•Gear detection is based on vehicle speed (if a vehicle speed sensor is available) or rpm drop during shift. Vehicle speed based gear detection allows use in applications other than drag racing as it allows correct gear sensing after downshifts

•Launch detection is based on vehicle speed (if a vehicle speed sensor is available) or a signal from a line lock solenoid

•Two independent programmable alarm functions for analog inputs. Additional programmable alarm and general purpose control output functions are described in the software section

•Flexible rpm input compatible with high voltage coil drive (vehicles with coil packs or distributor ignition), standard 12 volt tach signal, or low level logic drive (newer vehicles with coil-on-plug)

•Built-in data logging. Ideal as basic vehicle data logger during dyno tuning or on the track. Logs data whenever system is armed. Stores last 5 minutes of data at 10 samples/second

•Data logged includes throttle position, rpm, vehicle speed, status of all inputs and outputs, and two 0-5 volt analog inputs•Heavy-duty industrial grade clamping terminal blocks allow easy and reliable hookup without soldering or crimping•Compact size: 3.3” L x 2.4” W x 1.1” H, not including mounting feet and terminal block•USB interface to laptop PC. Powerful Windows software for programming controller and downloading logged data. Please visit http://www.daytona-twintec.com for complete details and downloads

PART # DESCRIPTION SUG. RETAIL2211-0085 Programmable shift light and vehicle data logger $249.95

SHIFT MINDER KIT•Designed to provide optimum shifting to match your style•Triggering accuracy to better than 1%•Adjustable to switch at any of 64 different rpm settings; 125 rpm increment between each setting•Requires no additional parts for rpm switch point selection


PART # DESCRIPTION SUG. RETAILDSMS-2 Shift minder system w/ shift light, two-cylinder (4000 -11875 rpm) $199.95

PART # DESCRIPTION SUG. RETAIL7805-1040 For 84-99 Big Twin, 86-03 XL (exc. Twin

Cam, 1200s models) $384.95

SINGLE- OR DUAL-FIRE IGNITION MODULE•For use in single- or dual-fire applications with proper coil

•Features adjustable rev limiter and 15% advance curves

•Requires graphite plug wires and resister spark plugs•Uses stock rotor cup OEM #32402-83 or PART #2101-0234

BREAKERLESS DUAL-FIRE IGNITION KIT•Eliminates the need for points and condenser

•Unilite module has no moving parts and consists of an integrated photo coupler, a signal processor and a power switch

•Recommended coils are 2.0 - 3.0 ohms for racing or 3.0 - 4.0 ohms for street


NOTE: Requires the use of an advance unit and spiral-core or carbon core plug wires.PART # DESCRIPTION SUG. RETAILDS-243085 For 84-99 Big Twin and 86-03 XL models

(except Twin Cam) $157.95

PART # DESCRIPTION SUG. RETAIL0807-0116 For 84-93 FLT, 84-95 FXST/FLST, 84-94 FXR and

86-94 XL; repl. OEM #32400-80A $40.950807-0117 For 91-95 FXD; repl. OEM #32404-90 40.950807-0118 For 94-95 FLT, 95-97 XL and 98-03 XL1200S;

repl. OEM #32400-94 40.95

IGNITION SENSOR ASSEMBLIES•Assemblies include pickup, mounting plate and wires with connectors


IGNITION SENSOR ASSEMBLIES•Each assembly includes a pickup, mounting plate and wires with connectors


PART # DESCRIPTION SUG. RETAIL0807-3017 For 84-93 FLT, 84-95 FXST/FLST, 84-94 FXR

and 86-94 XL; repl. OEM #32400-80A $37.950807-3018 For 91-95 FXD; repl. OEM #32404-90 37.950807-3019 For 94-95 FLT, 95-97 XL and 98-03 XL1200S;

repl. OEM #32400-94 37.95

0807-0117 0807-0118

0807-3017


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

614

HIGH-PERFORMANCE IGNITION ADVANCE UNIT•Advance mechanism is smoother, more accurate and more reliable than any OEM unit

•Stainless steel shaft, plate and washers•Heat-treated advance weights coated with high-tech, low-friction polymers

•Hardened-steel pins hold the weights in place, which are in turnspring loaded, using high-quality phosphate-coated spring wire

•Springs wound to exacting specifications, and cadmium-plated to resist corrosion


PART # DESCRIPTION SUG. RETAIL2105-0051 For 84-99 80” Big Twin and 86-03 XL that utilize

a mechanical advance $57.95

PART # DESCRIPTION SUG. RETAILDS-196035 For all 84-99 Big Twin, 86-03 XL models $1.95

REPLACEMENT TIMING BOLT•Replacement advance unit timing bolt

PART # DESCRIPTION SUG. RETAIL2401-0464 For 84-99 Big Twins; repl. OEM #s

32606-82 and 32601-80 $12.95

IGNITION COVER TIMER STUD KITS•Reproduction of original ignition timer cover studs

•Zinc-plated•Sold in pairs

PART # DESCRIPTION SUG. RETAIL2130-0047 For 84-99 FX, FL (except

Twin Cam); repl. OEM #s 32601-80, 32606-82 $1.45 (set)

IGNITION CIRCUIT BREAKER STUDS•Replacement studs with screws and washers

•Sold in a 10 pack

PART # DESCRIPTION SUG. RETAILDS-196040 For all Big Twin and XL models $4.95

CLEAR TIMING HOLE PLUG•Plastic plug lets you locate the timing mark without getting an eye full of oil

•Easy installation and removal•Size is 5/8”-18PART # DESCRIPTION SUG. RETAIL

DS-242294 For 84-99 Big Twin; repl. OEM #s 32606-82 and 32601-80 (pr.) $20.95

STAINLESS STEEL SENSOR PLATE SCREWS•Made from 17-4 stainless steel•Strongest screws on the market today•The body is .700” long; replaces OEM #32606-82•Sold in pairs•Made in the U.S.A.

ADVANCE UNIT ASSEMBLY•Includes all the items shown; breaker plate assembly and the advance unit with bolt can be purchased separately

PART # DESCRIPTION SUG. RETAILFOR 84-99 BIG TWIN AND 86-03 XL MODELS W/ POINTS IGNITION CONVERSION (EXCEPT SINGLE FIRE IGNITION)DS-242299 Advance unit assembly, complete $40.95DS-242298 Advance unit and bolt only 32.95DS-242301 Breaker plate assembly w/ points, condenser 8.95

DS-242299


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

615

PART # DESCRIPTION SUG. RETAILFOR 07-11 BIG TWIN AND 06 DYNA GLIDE2110-0247 1.4kW black; repl. OEM #31619-06A $319.952110-0248 1.4kW chrome; repl. OEM #31621-06A 385.95FOR 90-06 BIG TWIN (EXCEPT 06 DYNA GLIDE) (REPL. OEM #S 31553-90 AND 31553-94)80-1001 1.4kW black 259.9580-1002 1.4kW chrome 346.952110-0074 1.6kW black 404.952110-0075 1.6kW chrome 429.952110-0168 1.7kW black 352.9580-1004 1.7kW chrome 399.95

PART # DESCRIPTION SUG. RETAILFOR PRE-89 BIG TWIN80-10051 1.4kW Hitachi black $246.9580-10061 1.4kW Hitachi chrome 317.9580-10071 1.4kW Prestolite black 246.9580-10081 1.4kW Prestolite chrome 317.95FOR 86-11 SPORTSTER80-1009 1.4kW black 297.9580-1010 1.4kW chrome 406.951 Year 2000 starter motor design is more compact than the original

and does not require the rear bracket. Because of the higher output, 4-gauge cables are recommended for this starter.

HIGH-PERFORMANCE STARTER MOTORS•100% new – not remanufactured!•Special pinion shaft threads and extended jackshaft bolt allow for a wider range of applications•Starters feature oversize clutch rollers, cold headed steel idler gears and armature hairpins that are resistance-fused to the armature•All 90-06 starters are supplied with 10/32 threaded output shafts•1.4kW is a new replacement unit for stock and slightly modified engines; generates more power than the OEM stock starter•1.6kW is a new replacement unit with oversized copper wound field coils that provide starting power for big-inch engines while placing less stress on the battery; measures approximately 1/2” longer in the field case than a 1.4kW starter

•1.7kW is a new replacement unit for highly modified engines in touring bikes, featuring a permanent magnet motor coupled to the OEM-style offset gear reduction case making a drop-in solution to hard-starting touring bikes (due to the high in rush current of a permanent-magnet motor a minimum 300 CCA battery is recommended with 4-gauge battery cables)

•Available in black or chrome finish•Made in the U.S.A. and Canada

NOTE: OEM Hitachi starters for pre-89 Big Twin measure 51/4”. OEM Prestolite starters for pre-89 Big Twin measure 6”.

NOTE: For optimum performance, use with Drag Specialties battery and battery cables.

PART # DESCRIPTION SUG. RETAILFOR 84-88 BIG TWIN EQUIPPED WITH HITACHI STARTERS; REPL. OEM #31570-732110-0226 Chrome $179.952110-0225 Black 159.95

HIGH TORQUE STARTERS•Starters feature 15% more power and torque than OEM units

•Manufactured using heavy-duty armature commutators, large drive-end bearings and needle bearings in the com-end caps

REPLACEMENT COMPONENTS FOR HITACHI STARTERSNOTE: For OEM equivalent starters. Will not fit high-torque starters.

FOR 84-88 BIG TWIN MODELS EQUIPPED WITH HITACHI STARTERSPART # DESCRIPTION SUG. RETAILDS-194148 Armature; repl. OEM #31580-73 $124.95DS-194144 Starter brush set –

for Hitachi style 15.95

2110-0247

80-1005

80-1006

80-100980-1010

2110-0226

2110-0225

DS-194148

2110-02482110-0074

2110-0075


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

GEN III STARTER MOTORS•The American-made and -designed Compu-Fire starter is so good, it’s patented

•Powerhouse turns over a full 2kW, while only drawing 175A, and yet is encased in a short compact package

•Feature an extended jackshaft bolt, removable jackshaft coupler, ultra-powerful Neodymium magnets, an innovative high-torque clutch and a 6:1 planetary gear reduction that is sure to start your hard-cranking steed

•Starter body is polished with chrome end caps

•PART #2110-0197 is designed for fuel-injected Twin Cams with increased compression and displacement that require faster cranking speeds


1.6KW TWIN CAM STARTER•1.6kW output allows easy starting with stock battery cables

•Produces more cranking power for big-inch Twin Cam engines

•OEM size for easy installation, even on Softails

•Starter clears oil filler on Dynas and Touring models

•11-tooth drive gear for faster cranking•Made in the U.S.A.

BABY STARTER•Permanent Magnet Gear Reduction (PMGR) starter

•Mates to OEM starter gear case and output shaft

•Produces 2kW of cranking energy by using a modern permanent magnet field

•Lower planetary gear reduction ratio of 6:1•Stardard machined finish with chrome end caps

616

PART # DESCRIPTION SUG. RETAILFOR 90-93 BIG TWIN (1.4kW) (EXCEPT FLT)2110-0123 Chrome $431.952110-0125 Black 431.952110-0126 Black, w/ K-9 drive 531.95FOR 94-06 BIG TWIN (1.4kW) (EXCEPT FLT, 06 DYNA GLIDE)2110-0128 Polished, w/ K-9 drive 498.952110-0129 Chrome 431.952110-0131 Black 431.95

STEALTH STARTERS•The Stealth starter struts with a shell for style

•Concealed bolts and minimal lines give way to a smooth sleek design

•Feature dependable gears and components

•Chrome and polished starters have engraved end caps; black starters have smooth end caps

•For the ultimate in high-torque starting, Stealth starters are available with the Krypto-9 starter drive pre-installed


SUPERTORQUE STARTERS•Give your bike up to 46% more cranking torque compared to stock with intelligent gear-reduction design

•1.4kW starters perform well without the use of a high-amp battery

•Easy installation•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 07-11 BIG TWIN, 06 DYNA2110-0238 Black $431.952110-0239 Chrome 431.95FOR 90-93 BIG TWIN (EXCEPT FLT)2110-0133 Polish 349.952110-0134 Chrome 349.952110-0135 Black 349.95FOR 90-93 FLT/FLHT2110-0137 Chrome 389.952110-0138 Black 349.95FOR 94-06 BIG TWIN2110-0139 Polish 349.952110-0140 Chrome 389.952110-0141 Black 349.95

PART # DESCRIPTION SUG. RETAIL2110-0039 For 90-06 Big Twin (except 06 Dyna Glide) $579.952110-0197 For 99-06 fuel-injected Twin Cam (except 06 Dyna Glide) (high-speed starter) 579.952110-0059 For 86-11 XL and 94-08 Buell (except 1125R) 579.95

PART # DESCRIPTION SUG. RETAILFOR 06 DYNA, 07-11 BIG TWIN MODELS2110-0244 Chrome $549.952110-0245 Black 549.95

PART # DESCRIPTION SUG. RETAIL2110-0364 For 85-88 Big Twins $449.95

2110-0123

2110-0125

2110-0133

2110-0244

2110-0039

2110-0197


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

617

PART # DESCRIPTION SUG. RETAILFOR 90-93 BIG TWIN2110-0053 Chrome/polished $449.952110-0054 Black 399.95FOR 94-06 BIG TWIN (EXCEPT 06 DYNA GLIDE)2110-0056 Chrome/polished 449.952110-0057 Black 399.95

SLUGGER 1.8kW HIGH-TORQUE STARTER MOTORS•Nipondenso starters are assembled in the USA with heavy-duty components and tested with state-of-the-art equipment

•Starter offers superior windings, high-tolerance heavy-duty clutch and a thicker commutator that resists flying shorts

•1.8kW output has the torque to start any monster motor with the least amount of amperage drain

•Static balanced for smoother operation

•Low-profile design will clear the electronic speedometer sensor for easy installation•Made in the U.S.A.

NOTE: Requires use of spacer block PART #DS-196233 when used on 90-06 FLT models. On FXST/FLST, Dyna and FXR models you must relocate oil lines and some wiring.

PART # DESCRIPTION SUG. RETAIL2013-1388 For 86-E88 Big Twin $429.95

1.4 kW POLISHED STARTER•Polished motor with a 6061 T-6 billet housing•Features a built-in gearshaft housing and gear•1.4 kW starter is designed for motors up to 100”•Direct replacement for 1.0 kW starters•Comes with mounting hardware and gasket•Uses existing starter shaft•Made in the U.S.A.

FITS MODEL BLACK WRINKLE SUG. RETAIL POLISHED/CHROME SUG. RETAIL1.5KW FOR BIG TWINFor 07-11 models, 06 Dyna Glide 2110-0250 $359.95 2110-0249 $389.951.4 KW FOR BIG TWIN (EXCEPT 06 DYNA GLIDE)For 94-06 models DS-196030 349.95 DS-195153 349.95For 90-93 models DS-196031 349.95 DS-195152 349.951.6 KW FOR BIG TWIN (EXCEPT 06 DYNA GLIDE)For 94-06 models DS-196190 379.95 DS-196186 399.95For 90-93 models DS-196189 379.95 DS-196185 399.952.0 KW FOR BIG TWIN (EXCEPT 06 DYNA GLIDE)For 94-06 models DS-196037 487.95 DS-196034 531.95For 90-93 models DS-196038 487.95 DS-196036 531.951.2 KW FOR XL, 94-08 BUELL (EXCEPT 1125R)For 86-11 models DS-196178 349.95 DS-196177 349.951.4 KW FOR XL, 94-08 BUELL (EXCEPT 1125R)For 86-11 models DS-196183 349.95 DS-196182 349.95

STARTER MOTORS•Nipondenso starters are assembled in the U.S.A. with heavy-duty components and tested with state-of-the-art equipment

•Solenoid plunger, return damper and springs are replaced with stronger components

•Clutch shaft and rollers are replaced with precision-ground and hardened parts for longer service life

•All components are assembled with a special lube that has been formulated for starter roller clutch applications

•CNC-machined billet mounting noses are held together with aerospace fasteners

•After assembly, all starters go to a dyno test including hi-low voltage, stall torque, solenoid engagement, amperage draw, load test, maximum rpm and motor impulse wave form

•Starters have a 4.4:1 gear reduction and produce 46% more cranking torque than the stock starter•Starters available in four kilowatt ratings (1.2, 1.4, 1.6 and 2.0)•The 1.6 kW starter is designed for 96” or bigger motors with limited size batteries such as FXR, FXST and FXD models•The 1.2/1.4/1.5 kW starters are designed for OEM applications; use Terry battery cables and a battery with 300+ cranking amps like the Drag Specialties battery for best results

•The 2.0 kW starter will start any monster motor (for best results, use with Terry battery cables and a battery with 300+ cold cranking amps like the Drag Specialties battery)

•Choose from two finishes: black wrinkle or polished/chrome•Made in the U.S.A.

NOTE: 1.6 and 2.0 starters will require spacer block PART #DS-196233 when used on 90-05 FLT models. On Softail, Dyna and FXR models, you must relocate oil lines and some wiring.

PART # DESCRIPTION SUG. RETAILDS-196233 For 93-06 FLT/FLHT models $51.95

OIL FILLER SPOUT SPACER BLOCK•Used to space the filler spout outward when using a longer aftermarket starter•Machined billet aluminum with a polished finish•11/2” thick•Made in the U.S.A.

NOTE: Gaskets and longer bolts must be purchased separately.

2110-0053

Black wrinkle Polished/chrome


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

618

PART # DESCRIPTION SUG. RETAIL2110-0073 For 94-06 Big Twin (except 06 Dyna

Glide) (10-tooth) $85.952110-0169 For 94-06 Big Twin (except 06 Dyna

Glide) w/ 66-tooth conversion gear installed on clutch basket 85.95

2110-0072 For 89-93 Big Twin (nine-tooth) 85.95

STARTER JACKSHAFT KITS•One-piece design jackshaft assembly delivers more torque to the primary and is more tolerant of misalignment problems, all for less money than stock jackshaft assemblies

•Replaces the existing shaft, couplings and pinion gear•Includes jackshaft, starter shaft bolt, spring, washer and snap ring•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2110-0147 For 89-93 Big Twin (9 tooth) $89.952110-0148 For 94-06 Big Twin (10 tooth) (except 06 Dyna) 89.95

STARTER JACKSHAFT KITS•Complete assembly includes shaft extension, pinion gear, coupler, spring and clips

PART # DESCRIPTION SUG. RETAIL2110-0242 For 94-06 Big Twin models (except

06 Dyna) w/ 102-tooth ring gear $112.95DS-360214 For 89-93 Big Twin models (9-tooth) 112.95

STARTER JACKSHAFT ASSEMBLY KIT•Kit includes starter shaft bolt, spring, snap rings, thrust washer, lock tab washer, couplings, shaft extension and pinion gear


PART # DESCRIPTION SUG. RETAIL2110-0084 For 94-06 jackshaft kit $9.952110-0085 For 89-93 jackshaft kit 9.95

STARTER JACKSHAFT REPAIR KITS•Repair kit includes thrust washer, lock plate, spring, screw and retaining rings

PART # DESCRIPTION SUG. RETAIL2110-0367 For 81-90 XL models; repl. OEM #31567-81 $103.95

STARTER DRIVE CLUTCH•Direct OEM replacement•Includes bearing and drive clutch

•Sold each

PART # DESCRIPTION SUG. RETAIL2110-0369 Starter drive gear for 84-88 FX;

repl. OEM #31443-65A $33.95

STARTER DRIVE•Heavy-duty, five-roller clutch

•Weatherproof•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-242117 Starter drive gear for 84-88 FX;

repl. OEM #31443-65A $31.95

STARTER DRIVE•Heavy-duty, weatherproof, five-roller clutch


PART # DESCRIPTION SUG. RETAIL2110-0117 For 1.8kW/2.4kW Spyke starters $285.95

KRYPTO-9 STARTER DRIVE CLUTCH•The ultimate in starter drive strength•Utilizes cutting edge materials and technology to achieve maximum strength and hardness for a beefed-up drive

•Drive sprags are made from 52100 high carbon alloy•Double-cage construction provides full phasing with a tighter fit


PART # DESCRIPTION SUG. RETAIL2110-0115 For 1.4kW Spyke Stealth and

Supertorque starters and most 90-06 OEM style starters; repl. OEM #31663-90 $89.95

2110-0240 For 84-88 FX; repl. OEM #31443-65A 61.95

HEAVY-DUTY STARTER DRIVE CLUTCHES•Comes complete with bearing and drive clutch

•Direct OEM replacement•Made in the U.S.A.

2110-0072

2110-0147

2110-0115

PART # DESCRIPTION SUG. RETAIL2110-0319 For 06 Dyna and 07-11 Big Twin;

repl. OEM #s 31681-07, 31345-07 $84.9579-2101 For 91-06 Big Twin (except 06 Dyna Glide),

91-11 XL and 94-02 Buell; repl. OEM #31663-90 59.9579-2103 For 89-90 Big Twin; repl. OEM #31544-90 75.952110-0010 For 86-90 XL models; repl. OEM #31567-81 97.95

STARTER DRIVE CLUTCHES•High-quality components to repair common failures of OEM Harley starters

•Clutches with bearings and spring are available for most models; PART #2110-0319 includes bearing and pinion gear

2110-0319

79-2101

2110-0010

79-2103

2110-0084

2110-0242

DS-360214

PART # DESCRIPTION SUG. RETAILFOR 91-06 BIG TWIN (EXCEPT 06 DYNA GLIDE) AND 91-11 XL AND 94-02 BUELL STARTERSDS-196231 For 1.2 kW or 1.4 kW or 1.8 kW Slugger

starters, repl. OEM #31663-90 $102.95DS-196232 For 1.6 kW and 2.0 kW starters 122.95

STARTER DRIVE CLUTCH•Comes complete with bearings and drive clutch•Available for high-performance or OEM starters•Sold each

DS-196231


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

619

PART # DESCRIPTION SUG. RETAIL2110-0229 For 94-09 Big Twin; repl. OEM #33126-94 $.95 (ea.)2110-0232 For 93 Big Twin; repl. OEM #33126-93 1.55 (ea.)2110-0231 For L90-92 Big Twin; repl. OEM #33126-90 1.55 (ea.)2110-0230 For 89-E90 Big Twin; repl. OEM #33125-89 1.55 (ea.)

STARTER SHAFT LOCK WASHERS•Sold in 10-pk.

PART # DESCRIPTION SUG. RETAIL1132-0092 For 84-88 Big Twin $9.95

STARTER SHAFT THRUST WASHER•Replaces OEM #31502-65•Sold in pairs

PART # DESCRIPTION SUG. RETAILDS-195147 For 89-90 Big Twin and 86-90 XL models;

repl. OEM #31596-85 (set) $17.95DS-194144 For 84-88 Big Twin models;

repl. OEM #31582-73 (set) Hitachi 15.95

STARTER BRUSHES•Replacement brushes for early and late model starters

•Made in the U.S.A.PART # DESCRIPTION SUG. RETAIL2110-0051 For 98-06 Big Twin (except 06 Dyna Glide) $181.952110-0049 For 94-97 Big Twin 166.952110-0050 For 90-93 Big Twin 166.95

RING GEAR CONVERSION KITS•84-tooth ring gear conversion kit for chain drive primary

•Include ring gear, six bolts, and a 10-tooth pinion gear


PART # DESCRIPTION SUG. RETAIL2110-0241 For 98-06 Big Twin (except 06 Dyna); has 69/16” i.d. $134.952110-0243 For 94-97 Big Twin; has 67/16” i.d. 131.95

RING AND PINION GEAR KITS•Convert 102-tooth ring gear to 66-tooth ring gear•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-242080 For 90-93 Big Twin models (66-tooth) $79.95DS-242081 For 94-97 Big Twin models (102-tooth) 112.95

STARTER RING GEAR•High-quality ring gears designed to bolt on 90-97 Big Twin models with OEM chain clutch baskets

•Replace your riveted ring gear by simply drilling out rivets and bolting on new gear

•Comes complete with mounting bolts•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2013-1702 For 98-06 Big Twin (except 06 Dyna) $159.952013-1703 For 94-97 Big Twin 159.952013-1704 For 90-93 Big Twin 189.95

10/84 STARTER GEAR SET•Features a 10-tooth pinion gear and an 84-tooth starter ring gear that produces 15% more starting torque than stock gears

•Gears are made of 8620 carbonized steel for strength and long life

•Uses OEM clutch baskets•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-242074 102-tooth ring for 94-97 Big Twin $96.952110-0204 102-tooth ring for 98-06 Big Twin 96.952110-0205 66-tooth ring for 90-93 Big Twin 96.95

OEM-REPLACEMENT STARTER RING GEARS•Designed to bolt on to primary chain clutch shells•High-quality steel construction•Includes mounting hardware


RETAILDS-195154 For 84-88 Evo Big Twin; repl. OEM #31572-79 (Hitachi) $43.95DS-195157 Oil deflector plate for Prestolite or Hitachi;

repl. OEM #60516-65A 15.95

STARTER SHAFT HOUSING•Available for Hitachi starter motors

•Fits chain drives•Oil deflector and needle bearing (OEM #9062) PART #BAM-810, must be purchased separately

2110-0241 2110-0243

DS-242080

DS-242081

DS-242074 2110-0204 2110-0205

2013-1702

DS-195147

2110-0232

PART # DESCRIPTION SUG. RETAIL2110-0233 Bendix lever pivot bolt for 84-89 Big Twin;

repl. OEM #31478-65A $7.95 (ea.)2110-0234 Starter gear shifter lever for 84-89 FXST/

FLST models; repl. OEM #31445-65A 28.952110-0236 Starter shaft shifter collar for 84-89 FXST/

FLST models; repl. OEM #31503-70 27.95

STARTER SHAFT COMPONENTS•Sold individually except PART #2110-0233, which is sold in a 5-pk.


2110-0234

2110-0049

DS-195157

DS-195154

PART # DESCRIPTION SUG. RETAIL1120-0023 For 84-88 FX, FXWG, FXST outer primary

covers; repl. OEM #9063 $9.95

STARTER SHAFT BEARING•Outer primary housing bearing for starter shaft


PART # DESCRIPTION SUG. RETAILBAM-810 For 84-88 Big Twin chain drive; repl. OEM #9062 $13.95

STARTER SHAFT HOUSING BEARING•Needle bearing fits starter housings as listed below


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

620

PART # DESCRIPTION SUG. RETAILDS-326130 For 91-11 Big Twin except FXST,

103” and 110” SE models $62.95

GROOVED BILLET STARTER END COVER•Chrome-plated aluminum construction

•Fits OEM starters•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2110-0375 For 07-11 FLHTCUSE, 07-08 FLHRSE,

09 FLTRSE, 10-11 FLHXSE $89.952110-0376 For 03 FLHRSE, 04-05 FLHTCSE, 06 FLHTCUSE 89.95

STARTER MOTOR COVERS•Chromed cover sets cover the solenoid, the end of the starter motor and associated wiring

•Sold as a kit

PART # DESCRIPTION SUG. RETAIL2110-0166 For 96-07 Evolution and Twin Cam $26.95

STARTER CONNECTOR PLUG COVER•Quick, easy chrome cure for the stock white plastic electrical connector on your starter

•Sold each

NOTE: Not recommended for Softail models, as the connector is covered by the oil tank.

PART # DESCRIPTION SUG. RETAILDS-325517 For 84-88 Big Twin models $13.95

STARTER END COVER•Chromed, die-cast starter end cover adds a finishing touch to custom or fully dressed Harley models; features a smooth finish

PART # DESCRIPTION SUG. RETAIL2110-0368 For 84-88 FXST, 85-86 FXWG, 85 FXSB;

repl. OEM #71469-65 $43.952110-0370 For 84-88 FLT, FLHT, FXR; repl. OEM #31489-79A 50.95

STARTER SOLENOIDS•Features zinc-finished moisture-proof case, hardened steel plunger and long-life contact disc


PART # DESCRIPTION SUG. RETAIL2110-0327 For 84-88 FXST/FLST, 85-86 FXWG,

85 FXSB; repl. OEM #71469-65 $31.95

HIGH-PERFORMANCE STARTER SOLENOID•Designed with extra current capacity for starting high-compression motors

•Recommended for use with Drag Specialties High Performance Starters

•Features zinc-plated case•Copper terminals and hardened plunger•Sealed cover for long life

PART # DESCRIPTION SUG. RETAILFOR 84-88 FXST; REPL. OEM #71469-6540111 Zinc finish solenoid $51.9540111C Chrome solenoid 74.95FOR 84-88 FLT, FLHT; 84-88 FXR; REPL. OEM #31489-79A401141 Zinc finish solenoid 58.9540114C1 Chrome solenoid 70.95SOLENOID REPAIR KIT401121 Cap, mounting lugs, plunger, spring

and assembly screws 18.951 Made in the U.S.A.

STARTER SOLENOIDS AND REPAIR KIT•Features permanently sealed moisture-proof cases, heavy-duty, multi-weld brackets, hardened steel plungers with long-life contact discs and high-strength end caps

•Available zinc- or chrome-plated

PART # DESCRIPTION SUG. RETAILDS-196230 For 89-11 Big Twin models; repl. OEM #31604-91 $30.95

STARTER SOLENOID REPAIR KIT•Kit includes plunger assembly, contacts and spring

PART # DESCRIPTION SUG. RETAIL2110-0320 For 06 Dyna and 07-11 Big Twin $24.9579-1101 For 89-06 Big Twin (except 06 Dyna);

repl. OEM #31604-91 22.95

STARTER SOLENOID KITS•Kit contains contacts and gaskets to cover all models

40111C40114C 40112

2110-0320

79-1101

2110-0368

2110-0370

2110-0375

2110-0376

PART # DESCRIPTION SUG. RETAILDS-242116 For 84-88 FXST, 85-86 FXWG, 85 FXSB;

repl. OEM #71469-65 $40.95DS-242281 For 84-88 FLT, FLHT and 84-88 FXR;

repl. OEM #31489-79A 48.95

STARTER SOLENOIDS•Features zinc-finished moisture-proof case, hardened steel plunger and long-life contact disc


DS-242281


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

621

SOLENOID END COVER/STARTER BUTTONS•Billet aluminum construction available with a chrome or black finish•Replaces the solenoid end cover and includes mounting screws•Fits most 91-11 OEM and aftermarket starter motors (except Compu-Fire, 2.0/2.4 Terry starters)


NOTE: On some models the exhaust system may not allow access to the starter button.

SOLENOID END COVER•Beautifully chromed cover features die-cast construction

•Fits over the starter solenoid rubber boot, PART #DS-373608

•Looks great on our chromed solenoid, PART #40111C

U.S. Des. Pat. #283,210.

STARTER SOLENOID COVERS•Covers the starter solenoid and related wiring with beautiful chrome•Works with stock starter end cover

PART # DESCRIPTION SUG. RETAILFOR 1.2 /1.4 KILOWATT STARTERDS-272214 Chrome $104.95DS-272215 Black 104.95FOR 1.6 KILOWATT STARTERDS-272216 Chrome 130.95FOR 2.0/2.4 KILOWATT STARTERDS-272217 Chrome 130.95

PART # DESCRIPTION SUG. RETAILDS-373609 For 84-88 FXST, 85-86 FXWG and 85 FXE $21.95

PART # DESCRIPTION SUG. RETAIL2110-0228 For 07-11 FLHT/FLHR/FLTR/FLHX $69.952110-0227 For 99-06 FLHT/FLHR/FLTR 69.95

SOLENOID BODY COVER FOR BIG TWIN•Will not fit rubber-mounted motors

•Made in the U.S.A.PART # DESCRIPTION SUG. RETAILDS-373611 Chrome solenoid body cover fits 84-88 Big Twin

(except rubber-mounted motors) $12.95

CHROME SOLENOID END COVER•Features the Blood Groove design that matches many other Küryakyn accessories

•Replaces the stock OEM cover•Comes complete with chrome hardware; reuses stock gasket

SOLENOID END COVER STARTER BUTTONS•Machined from billet 6160 aluminum, then triple show-chrome plated

•Feature a unique internally adjustable actuator to maintain constant contact as parts wear

•Can be used as a primary or backup starteractuation system


PART # DESCRIPTION SUG. RETAILDS-376596 For all 91-11 Big Twin, 91-11 XL models $19.95

PART # DESCRIPTION SUG. RETAIL2110-0118 For 1.2, 1.4kW starters $69.952110-0119 For 1.0, 2.0, 2.4, 2.6kW starters 69.952110-0120 For 1.6, 1.8kW starters 69.95

RUBBER SOLENOID BOOT FOR BIG TWIN•A molded black rubber boot for 4- and 5-speed starter solenoids

•We recommend replacing the OEM boot when installing our chrome solenoid end cover, PART #DS-373609

PART # DESCRIPTION SUG. RETAILDS-373608 For 84-88 FX/FXWG/FXST/FLST and 84-88 FL;

repl. OEM #s 31444-65A and 31475-77 $5.95

SOLENOID END COVER•Chrome-plated steel•Includes mounting hardware


RETAILDS-373598 For 91-11 Big Twin

and 91-11 XL $15.95

2110-0119

DS-272214

DS-272215

2110-0227

2110-0227


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

622

UNIVERSAL STARTER RELAY•Features a 12V solenoid•Includes starter relay, two metal brackets, three extra sets of terminal wires, three extra 30 amp blade-type fuses and five wires with terminals

PART # DESCRIPTION SUG. RETAIL2110-0325 Universal starter relay $41.95

IGNITION POWER RELAY KIT•Kit is designed to correct starting problems in motorcycles with high compression ratios or large displacement engines that use Twin Tec PART #s DS-242373 and 2101-0241 single-fire installations

•The combined draw of the starter motor, single-fire coil and the long length of wire between the battery, engine stop-run switch and the coil may leave too little energy at the coil to provide enough spark to fire the engine – the power relay kit solves the problem by supplying full battery voltage to the coil

•Kit includes a high-quality relay, wire and all required terminals•Made in the U.S.A.

RELAY•For the starter, brake light and fuel pump

MICRO RELAY•Direct OEM replacement•Sold each

STARTER RELAY SWITCH•Designed to handle high-current draw with ease

PART # DESCRIPTION SUG. RETAIL2101-0078 For single-fire ignition power conversions $18.95

PART # DESCRIPTION SUG. RETAILDS-325866 For 91-07 models; repl.

OEM #31504-91A w/ a diode $9.95


RETAILFOR 00-11 TWIN CAM MODELS0913-1002 Micro relay w/ diode; repl. OEM #31511-01A (system) $8.95DS-325849 Micro relay w/ diode; repl. OEM #31522-00B (starter) 6.95


RETAILDS-325702 For L85-E93 FLT, 86-E93

FXST, FXWG, FXR, FXRS, 91-E93 FXD, 85-E93 XL; repl. OEM #31506-79B $13.95

2106-0058 For 05-11 XL; repl. OEM #31601-04 11.95

RELAY•For use with starter, fuel pump and brake light•Made in the U.S.A.

MICRO RELAY•OEM replacement•Sold each•Made in the U.S.A.

STARTER BOOST RELAY•Provides full-battery voltage to the coil during cranking

•Makes start-up quicker and easier, especially with high-compression or stroker engines

STARTER RELAY SWITCH•Easily handles high-current draw

RELAY SOCKET ASSEMBLIES•Used for starter relay and other relays on later model bikes

•Available with black wires or colored wires (red, green, blue, yellow and orange)


PART # DESCRIPTION SUG. RETAIL2110-0374 For 91-07 models; repl.

OEM #31504-91A w/ a diode $10.95


RETAILFOR 00-11 TWIN CAM MODELS2110-0365 Micro relay w/ diode; repl. OEM #31511-01A (system) $9.952110-0373 Micro relay w/ diode; repl. OEM #31522-00B (starter) 6.95


RETAIL0807-3000 For 91-06 models $15.95

PART # DESCRIPTION SUG. RETAIL2110-0372 For L85-E93 FLT, 86-E93 FXST,

FXWG, FXR, FXRS, 91-E93 FXD, 85-E93 XL; repl. OEM #31506-79B $14.95

2110-0366 For 05-11 XL; repl. OEM #31601-04 12.95

PART # DESCRIPTION SUG. RETAILDS-272095 Black four-wire relay socket $9.95DS-272096 Colored five-wire relay socket 5.95

2110-03652110-0373

0913-1002 DS-325849

2110-03722110-0366

DS-272095

DS-272096

DS-325702


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

623

32 AMP CHARGING SYSTEM KIT•Heavy-duty rotors with magnets that are enclosed in stainless steel•A super thick hub and splines eliminate cracks•Precision wound stator•Includes a regulator to control everythingPART # DESCRIPTION SUG. RETAILFOR 91-99 BIG TWIN EVOLUTION MODELS (EXCEPT EFI)2112-0232 32 amp $296.95

PART # DESCRIPTION SUG. RETAILFOR 01-06 FXST/FLST2112-0233 3-phase 38 amp $347.95

40A 3-PHASE CHARGING SYSTEMS•Provide 25A at idle and 40A continuously above 2800 rpm•Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on the stock location without any frame modifications

•Precision-balanced vented rotor keeps the stator cooler in closed primary systems to maintain maximum output under all high-current draw conditions

•Custom-designed flanged seal spacer provides maximum support for the rotor

•Voltage regulator output is calibrated to 14.25V from idle on up•Ideal for fuel-injected engines and bikes with overdrive-type transmissions


NOTE: 96-05 FLT models will require regulator mount DS-330006.

PART # DESCRIPTION SUG. RETAILCHARGING SYSTEMS2112-0097 For 84-99 Evo Big Twin w/ enclosed primary drive (includes vented rotor) $399.952112-0099 For 84-99 Evo Big Twin w/ open primary drive (includes non-vented rotor) 399.952112-0098 For 03-06 Twin Cam (except 06 Dyna/FLT) w/ enclosed primary drive (includes vented rotor) 399.952112-0153 For 99-02 Twin Cam w/ enclosed primary drive (includes vented rotor) 399.952112-0100 For 03-06 Twin Cam w/ open primary drive (except 06 Dyna/FLT) (includes non-vented rotor) 399.952112-0152 For 99-02 Twin Cam w/ open primary drive (includes non-vented rotor) 399.95

PART # DESCRIPTION SUG. RETAILREGULATORS2112-0416 For all Compu-Fire charging systems above $204.95STATORS2112-0413 For PART #s 2112-0097, 2112-0099 169.952112-0414 For PART #s 2112-0098, 2112-0100, 2112-0152, 2112-0153 169.95

PART # DESCRIPTION SUG. RETAILROTORS2112-0415 For PART #s 2112-0097, 2112-0098, 2112-0153 $117.95DS-195116 For PART #s 2112-0099, 2112-0100, 2112-0152 106.95

32A CHARGING SYSTEM KIT•Kit includes stator, rotor and a black series-type regulator

•Series-type regulator reduces load on stator and decreases engine drag


HEAVY-DUTY 32A CHARGING KIT•Kit includes an encapsulated magnetic rotor, precision-wound stator and an 89-99 32A chrome voltage regulator

•Features a thick .476” center rotor as compared to a .222” center OEM rotor


PART # DESCRIPTION SUG. RETAILDS-195201 For 84-99 FXST, FLST, 91-98 Dyna, 84-98

FLT, FLHT, 84-94/99 FXR models (narrow rotor design) $249.95

DS-195202 Repl. stator for 89-99 Big Twin (except Twin Cam); repl. OEM #29970-88 88.95

DS-195203 Repl. rotor for all 84-99 Big Twin; repl. OEM #29957-81B (narrow) 106.95

PART # DESCRIPTION SUG. RETAILDS-195210 For 90-96 FLT, 91-98 FXD, L84-99 FXST/FLST,

84-94/99 FXR w/ 32A system $269.95

THREE-PHASE CHARGING SYSTEM•32A narrow rotor design converts an original single-phase system to a three-phase system on Evolution or S&S Evolution motors

•Digitally calibrated for optimum charging level over a wide temperature range

•Rugged billet aluminum regulator housing is highly polished for a custom look

•Self-temperature compensated to control heat and extend service life; over-temperature protection prevents catastrophic heat failure under severe operating conditions

•Highly efficient power conversion means more current at lower speeds for easy starting and extended battery life; more current is also available for operating EFI and other electronic accessories

•System reaches full charge at 550 to 650 rpm; factory system reaches full charge at 1000 rpm

•Designed for custom applications

CHARGING SYSTEM•38A system is great for new customs or stock replacement

•System includes stator (OEM #30017-01), rotor (OEM #29981-95) and regulator (OEM #74610-01)

•Regulator features a bright chrome finish•Rotor, stator and regulator also available separately

PART # DESCRIPTION SUG. RETAIL2112-0101 For Evolution-style Big Twin motors $378.95

PART # DESCRIPTION SUG. RETAIL2112-0096 For 01-06 FXST/FLST $299.95

REPLACEMENT PARTS

2112-0097

DS-195201

2112-0415

2112-0413

2112-0416

2112-0232


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

624

3-PHASE 38A CHARGING KITS•Get more power out of a smaller stator•Kits deliver 17A at 1000 RPM, which is an increase of 10A from the old 32A system, and 38A at 2500 rpm


PART # DESCRIPTION SUG. RETAILCHARGING KITS2112-0150 For 01-06 FXST, FLST $397.952112-0149 For 84-99 FXST, FLST 449.952112-0151 For 04-05 FXD/FXDWG 395.952112-0149 For 91-98 FXD/FXDWG 449.952112-0148 For 84-98 FLT, FLHT,

FLHR, 84-98 FXR 449.952112-0404 For 91-03 XL 529.95 PART # DESCRIPTION SUG. RETAILREPLACEMENT REGULATORS2112-0015 For kit PART #2112-0150 $178.952112-0016 For kit PART #2112-0151 192.952112-0145 For kit PART #2112-0149 187.95REPLACEMENT STATORS2112-0146 For kit PART #s 2112-0150, 2112-0151 94.95

PART # DESCRIPTION SUG. RETAILREPLACEMENT STATORS (CONT)2112-0147 For kit PART #s 2112-0148, 2112-0149 $97.952112-0396 For kit PART #2112-0404 92.95REPLACEMENT ROTORSDS-195231 For kit PART #s 2112-0150, 2112-0151 109.95DS-195230 For kit PART #s 2112-0148. 2112-0149 151.95

3-PHASE 50A CHARGING KITS•Kits produce 32A at 1,000 rpm and 50A at 2,500 rpm•Yield more charging power when upgrading from 32A or 38A•Improved durability and dependability than stock 48A system•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILCHARGING KITS2112-0412 For 08-10 FXST, FLST

(OEM replacement) $542.952112-0406 For 07 FXST, FLST (OEM replacement) 532.952112-0411 For 08-11 Dyna (OEM replacement) 542.952112-0405 For 07 Dyna (OEM replacement) 537.952112-0410 For 07-08 FLHT, FLHR, FLHX, FLTR

(OEM replacement) 542.952112-0409 For 06 FLHT, FLHR, FLHX, FLTR

(50A upgrade) 438.952112-0408 For 04-05 FLHT, FLHR, FLHX, FLTR

(50A upgrade) 442.952112-0407 For 99-03 FLHT, FLHR, FLHX, FLTR

(50A upgrade) 434.952112-0558 For 89-98 FLHT, FLT, FLHR, FXR 466.95

PART # DESCRIPTION SUG. RETAILREPLACEMENT REGULATORS2112-0394 For kit PART # 2112-0406 $184.952112-0395 For kit PART # 2112-0411 195.95REPLACEMENT STATORS2112-0397 For kit PART #s 2112-0405, 2112-0406 129.952112-0399 For kit PART #s 2112-0407, 2112-0408, 2112-0409, 2112-0410 151.952112-0398 For kit PART # 2112-0411 139.95REPLACEMENT ROTORS2112-0403 For kit PART #s 2112-0405, 2112-0406, 2112-0410, 2112-0411 213.952112-0402 For kit PART #s 2112-0407, 2112-0408, 2112-0409 109.95

CYCLE ELECTRIC ALTERNATOR KITS•Kits include stator, rotor, voltage regulator and mounting hardware

•Available with a black Cycle Electric rectifying regulator•A special low voltage kit is available for Softail models or bikes with horseshoe oil tank

•38A and 45A systems have a wiring harness that bolts to the regulator and comes with a stand-off mount


NOTE: Adding electrical accessories increases amperage usage. When doing so it is important to consider amperage ratings of switches and wires. If you draw too many amps through a switch or wire, it will heat up and may burn. Fuses and breakers are sized to protect wiring and switches. DO NOT CHANGE 30A MAIN BREAKER TO A 50A BREAKER. THE SWITCHES AND WIRING WILL NOT BE PROTECTED.

PART # DESCRIPTION SUG. RETAILREPLACEMENT REGULATORDS-313011 For kit #DS-195213 $129.95DS-313016 For kit #DS-195214 134.95DS-313017 For kit #DS-195215 134.95DS-313064 For kit #2112-0017 158.952112-0144 For kit #s 2112-0018, 2112-0019 199.952112-0296 For kit #s DS-195216, DS-195217 177.95REPLACEMENT STATOR2112-0155 For kit #DS-195213 86.952112-0156 For kit #s DS-195214, DS-195215 94.952112-0157 For kit #2112-0017 101.95DS-195229 For kit #s DS-195216, DS-195217 117.952112-0160 For kit #s 2112-0018, 2112-0019 123.95REPLACEMENT ROTORDS-195230 For kit #s DS-195213, DS-195214, DS-195215, 2112-0017 151.95DS-195231 For kit #s DS-195216, 2112-0018 109.95DS-195232 For kit #s DS-195217, 2112-0019 393.95

PART # DESCRIPTION SUG. RETAILALTERNATOR KITSDS-195214 For 84-99 FX, FXR, FXD, FXDWG

(except FXST, FLST); 32A at 2500 rpm $376.95DS-195215 For 84-99 FXST, FLST (low voltage);

29A at 2500 rpm 376.952112-0017 For 99-03 FXD; 29A at 2500 rpm 408.952112-0019 For 99-05 FLT, FLHT, FLHR; 45A at 2500 rpm 704.95DS-195217 For 89-98 FLT, FLHT, FLHR; 45A at 2500 rpm 735.952112-0018 For 99-05 FLT, FLHT, FLHR; 38A at 2500 rpm 421.95DS-195216 For 89-98 FLT, FLHT, FLHR; 38A at 2500 rpm 441.95

2112-0404

DS-195214 DS-195216

2112-0558

2112-0405

2112-0148


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

625

PART # DESCRIPTION SUG. RETAILUNCOATED2112-0331 For 08-11 FXST/FXD; repl. OEM #30017-08 $94.952112-0094 For 01-06 FLST/FXST, 04-05 Dyna Glide;

repl. OEM #30017-01 104.952112-0330 For 06-11 FLHT/FLHR/FLHX/FLTR and

H-D FL Trike; repl. OEM #29987-06A 114.952112-0456 For 99-03 FXD; repl. OEM #29951-99 119.952112-0206 For 02-05 FLT; repl. OEM #29987-02 94.952112-0455 For 99-01 FLT; repl. OEM #29987-99 119.95DS-195092 For 89-99 FX, FL (except Twin Cam);

repl. OEM #29970-88 (32A) 64.95DS-195098 For 81-88 FX, FL; repl. OEM #29965-81 64.952112-0457 For 07-11 XL; repl. OEM #29997-07A 119.95DS-195039 For 91-06 XL; repl. OEM #29967-89/89A 64.95DS-195093 For L84-90 XL; repl. OEM #29967-84A 64.95COATEDDS-195035 For 84-88 FX, FL; repl. OEM #29965-81 64.95

ALTERNATOR STATORS•Each meets or exceeds OEM specifications and features precise construction


RETAIL2110-0210 For 01-06 FXST/FLST/04-05 Dyna unmolded (38A);

repl. OEM #30017-01 $96.952112-0420 For 06-11 FLT and H-D FL Trike (50A);

repl. OEM #29987-06B 206.952112-0419 For 02-05 FLT (38A); repl. OEM #29987-02 206.95152109 For 99-03 Dyna, 00 FXST/FLST, unmolded (38A);

repl. OEM #29951-99 219.952112-0418 For 99-01 FLT (38A); repl. OEM # 29987-99 206.95152110 For 97-98 FLT, unmolded (38A ); repl. OEM #29987-97 219.952112-0417 For 07 FXD (40A); repl. OEM #30017-07 165.95152107 For 89-99 BT (except Twin Cam)

unmolded (32A); repl. OEM #29970-88A 110.95152104 For 84-88 BT unmolded (22A); repl. OEM #29961-81 110.95152103 For 84-88 BT molded (22A); repl. OEM #29965-81 110.95152108 For 91-06 XL unmolded (22A); repl. OEM #29967-89A 110.95152106 For 86-90 XL molded (19A); repl. OEM #29967-84 110.95152105 For 86-90 XL unmolded (19A); repl. OEM #29967-84A 110.95

ALTERNATOR STATORS•Made from the finest components available, these high-quality stators are backed by a lifetime replacement warranty

•Each is individually wrapped and packaged in an attractive four-color display box


RETAIL2112-0333 For 07-11 FXST/FLST 40A; repl. OEM #40356-06 $229.952112-0093 For 01-06 FXST/FLST, 04-05 Dyna 38A;

repl. OEM #29981-95 114.952112-0453 For 06 FLHT (50A); repl. OEM #29943-06 89.952112-0332 For 06 FXD 38A; repl. OEM #40356-06 229.952112-0092 For 95-06 Big Twin, except 06 Dyna/

FLHT 45A; OEM #29999-97 264.95DS-195206 For 84-99 Big Twin (except EFI) 32A;

repl OEM #29957-81B 129.952112-0334 For 04-11 XL 32A; repl. OEM #32494-04 189.952112-0454 For 02-03 XL; repl. OEM #32413-92A 164.95

ALTERNATOR ROTORS•Feature encapsulated magnets in a reinforced steel shell

•Heavy-duty rotor features a .476” reinforced center thickness•OEM rotors have a .222” center thickness unless noted

PART # DESCRIPTION SUG. RETAILDS-195203 For all 84-99 Big Twin models;

repl. OEM #29957-81B (narrow) $106.95DS-195116 For S&S alternator motors (narrow) 106.95

REPLACEMENT ROTORS•Designed to work with 22 and 32A charging systems



RETAILROTORS2112-0403 For 07-11 Big Twin, 50A; repl. OEM #40356-07 $213.95DS-195232 For 95-06 Big Twin, 45A/48A; repl. OEM #29999-97B

(except 06 Dyna/FLT models) 393.95DS-195231 For 95-06 Big Twin, 38A; repl. OEM #29981-95

(except 06 Dyna/FLT models) 109.95DS-195230 For 84-06 Big Twin,18, 22, 32A; repl. OEM #29956-70,

29957-75 and 29957-81B (except 06 Dyna/FLT models) 151.952112-0402 For 06 FLHT, FLHR, FLHX, FLTR, 50A;

repl. OEM #29943-06 109.952112-0401 For 04-11 XL, 32A; repl. OEM #32494-04 199.952112-0400 For 91-03 XL, 20A; repl. OEM #32413-92C 199.95STATORS2112-0156 For 89-99 Big Twin (except Twin Cam),

32A; repl. OEM #29970-88 94.952112-0155 For 84-88 Big Twin, 22A; repl. OEM #29965-81A 86.952112-0399 For 06-11 FLHT, FLHR, FLHX, FLTR and

H-D FL Trike, 50A; repl. OEM #29987-06A 151.952112-0160 For 02-05 FLT, 45A; repl. OEM #29987-02 123.952112-0159 For 99-01 FLT, 45A; repl. OEM #29987-99 121.95DS-195228 For 97-98 FLT, 38A; repl. OEM #29987-97 126.952112-0398 For 08-11 FXST, FLST and Dyna, 50A;

repl. OEM #30017-08 139.952112-0397 For 07 FXST, FLST and Dyna, 50A; repl. OEM #30017-07 129.952112-0146 For 01-06 FXST, FLST and 04-05 Dyna, 38A;

repl. OEM #30017-01 94.952112-0157 For 00 FXST, FLST and 99-03 FXD, FXDWG 38A;

repl. OEM #29951-99 101.952112-0158 For 86-90 XL/Buell, 18A; repl. OEM #29967-84A 86.95DS-195224 For 91-06 XL/94-02 Buell, 22A; repl. OEM #29967-89A 89.95

CYCLE ELECTRIC ROTORS AND STATORS•Designed for direct OEM replacements•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-195103 For 84-86 FX $9.95

2110-0210 1521092112-0420DS-195035

2112-0094

2112-0206

STATOR LOCK AND MOUNTING KIT•Kit includes two locking plates (OEM #29988-73), alternator plug retainer (OEM #29954-71), two retainer screws (OEM #2216W), four stator mounting screws (OEM #2653) and four No. 10 internal tooth lockwashers (OEM #7118)

2112-0403 2112-0402 2112-0401 2112-0155

2112-0397

2112-0093 2112-0092

DS-195206

DS-195203


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

626

FITS MODEL CHROME SUG. RETAIL BLACK SUG. RETAIL OEM # AMPSFor 06-08 FLHT, FLHR, FLTR models 2112-0468 $164.95 2112-0469 $154.95 74505-06 60For 04-05 FLHT, FLHR, FLTR models 2112-0371 165.95 2112-0370 156.95 74505-04 38For 02-03 FLHT, FLHR, FLTR models 2112-0369 162.95 2112-0368 152.95 74505-02 38For 97-01 FLHT, 99-01 FLHRCI, FLTRI 7808-1011 136.95 7808-1010 128.95 74505-97 35For 08-10 FXST/FLST/FXCW 2112-0476 112.95 2112-0477 106.95 74540-08 40For 07 FLST, FXST, FXSTD 2112-0373 110.95 2112-0372 105.95 74540-07 40For 01-06 FLST, FXST, FXSTD 7808-1013 83.95 7808-1012 78.95 74540-01 38For 00 FXST, FLST 7808-1015 66.95 7808-1014 59.95 74512-00 25For 08-11 FXD/FXDWG 2112-0474 176.95 2112-0475 169.95 74631-08 40For 06-07 FXD, FXDWG 2112-0472 175.95 2112-0473 168.95 74631-06 40For 04-05 FXD, FXDWG 2112-0470 173.95 2112-0471 166.95 74631-04 40For 00-03 FXD, FXDWG 7808-1017 65.95 7808-1016 57.95 74518-99A 25For 89-99 80” Evolution Big Twin DS-313018 71.95 DS-313020 60.95 74519-88 32For 84-88 Big Twin DS-313000 58.95 DS-313021 50.95 74513-82, 74516-86 22For 09-11 XL 2112-0480 100.95 2112-0481 86.95 74711-08 32For 07-08 XL 2112-0478 100.95 2112-0479 86.95 74546-07A 32For 04-06 XL 2112-0375 87.95 2112-0374 73.95 74523-04 22For 94-03 XL 2112-0329 71.95 2112-0328 58.95 74523-94 32For 92-93 XL DS-313010 59.95 - 74523-92 22For 91 XL DS-313009 60.95 - 74523-91 22For 86-90 XL DS-313005 59.95 DS-313026 52.95 74523-84A 19

SOLID-STATE REGULATORS•High-reliability 12V voltage regulators feature rugged aluminum alloy construction and are available in chrome or black finish

•All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

PART # DESCRIPTION SUG. RETAILDS-313033 For 89-99 Big Twin models $124.95DS-313034 For 81-88 Big Twin models 124.95

VOLTAGE REGULATORS•Deliver a full range of operating and charging with OEM charging system or any 26-32 amp alternator

•Double-plated nickel-chrome finish•Designed as a bolt-on replacement for 81-99 Big Twins (except Twin Cam 88)


2112-0468

2112-0478

2112-0475

2112-0473

2112-0477

2112-0481

2112-0371 2112-03702112-0369 2112-0368

7808-10117808-1010 2112-0373

7808-1013 7808-1012 7808-1015

7808-1014 7808-1017 7808-1016

DS-313018 DS-313021

2112-0375

2112-0374

2112-0329

2112-0328

DS-313009DS-313026


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

627

PART # DESCRIPTION SUG. RETAILCHROME BILLETDS-313058 32A voltage regulator for 89-99 80”

Evolution Big Twin; repl. OEM #74519-88A $155.95BLACK FINNED0913-1703 38A voltage regulator for 84-99 80”

Evolution Big Twin (Single Phase) 137.95

PART # DESCRIPTION SUG. RETAILBLACK FINNED (CONT)DS-313041 32A voltage regulator for 89-99 80”

Evolution Big Twin (except 95-98 FLT) $109.95DS-313042 22A voltage regulator for 84-88 Big Twin 119.95DS-313046 22A voltage regulator for 91-00 XL 115.95

SERIES-TYPE REPLACEMENT VOLTAGE REGULATORS•New generation series regulators reduce load on stator and decrease engine drag•When not charging, regulator goes to an open circuit, so there is no load on the stator or rotor

•Available in a chrome billet or black finned aluminum case•Wire harness included•Made in the U.S.A.

PART # SUG. RETAIL201118B $117.95201118C 122.95201121B 105.95

PART # SUG. RETAIL201121C $127.95201122B 137.95201122C 171.95

PART # SUG. RETAIL201123C $137.952112-0361 156.952112-0362 189.95

PART # SUG. RETAIL2112-0363 $189.952112-0364 265.952112-0365 265.95

PART # SUG. RETAIL2112-0366 $265.952112-0367 139.95

FITS MODELACCEL BLACK

ACCEL CHROME OEM # AMPERAGE

For 07 FXST/FLST - 2112-0361 74540-07 38For 06-07 FXD/FXDWG - 2112-0363 74631-06 45For 04-05 FXD/FXDWG - 2112-0362 74631-04 38For 06-08 FLHT/ FLHR/FLTR - 2112-0366 74505-06 38For 04-05 FLHT/ FLHR/FLTR - 2112-0365 74505-04 38For 02-03 FLHT/ FLHR/FLTR - 2112-0364 74505-02 38

FITS MODELACCEL BLACK

ACCEL CHROME OEM # AMPERAGE

For 89-99 80” Evolution Big Twin 201122B 201122C 74519-88 32For 84-88 Big Twin 201118B 201118C 74513-82,

74516-86 22For 04-06 XL - 2112-0367 74523-04 22For 92-93 XL - 201123C 74523-92 22For 91 XL - 201123C 74523-91 22For 86-90 XL 201121B 201121C 74523-84A 19

SOLID STATE REGULATORS•High-reliability voltage regulators feature rugged aluminum alloy construction

•All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

PART # DESCRIPTION SUG. RETAILSTANDARD2112-0014 For 04-05 FLT/FLHT/FLHR, 38/47A;

repl. OEM #74505-04 $207.952112-01441 For 02-03 FLT/FLHT/FLHR, 38/47A;

repl. OEM #74505-02 199.95DS-313075 For 97-01 FLT/FLHT/FLHR, 38/47A;

repl. OEM #74505-97 202.952112-0395 For 06-07 Dyna, 50A; repl. OEM #74631-06 195.952112-0016 For 04-05 Dyna, 32A; repl. OEM #74631-04 192.95DS-313064 For 99-03 Dyna, 32A; repl. OEM #74518-99A 158.95DS-313016 For 89-99 Evolution Big Twin, 32A;

repl. OEM #74519-88A 134.95DS-313011 For 84-88 Big Twin, 22A; repl. OEM #74516-86 129.952112-0393 For 04-06 XL, 22A; repl. OEM #74523-04 136.95DS-313068 For 94-03 XL, 22A; repl. OEM #74523-94A 134.95

PART # DESCRIPTION SUG. RETAILSTANDARD (CONT)DS-313014 For 92-93 XL, 22A; repl. OEM #74523-92 $128.95DS-313013 For 91 XL, 22A; repl. OEM #74523-91 128.95DS-313012 For 86-90 XL, 17.4A; repl. OEM #74523-84A 132.95DS-313035 For 98-02 Buell, 22A; repl. OEM #74567-98Y 134.95DS-313013 For 95-97 Buell, 22A; repl. OEM #74523-91 128.95LOW VOLTAGE2112-0394 For 07 FXST, FLST, 50A; repl. OEM #74540-07 184.952112-0015 For 01-06 FXST, FLST, 32A; repl. OEM #74504-01 178.95DS-313066 For 00 FXST, FLST, 32A; repl. OEM #74512-00 158.95DS-313017 For 89-99 Evolution Big Twin, 32A;

repl. OEM #74519-88A 134.95DS-313015 For 84-88 Big Twin, 22A; repl. OEM #74516-86 129.951 Has permanently connected wires and a bracket to hold the stock

stator plug.

CYCLE ELECTRIC RECTIFYING REGULATORS•Control voltage on Harley-Davidson alternators, unlike other rectifiers or regulators that dump to ground and cause maximum stator current and higher temperatures

•Cycle Electric rectifying regulators block current to control voltage; this reduces stator current, resulting in low temperature and less drag on the motor, which means more efficient operation

•A lower-voltage style is available for Softail models with wraparound oil tanks to lower the heat level in the battery


PART # DESCRIPTION SUG. RETAIL2120-0313 For all 94-03 XL $24.95

DEUTSCH PLUG AND RECEPTACLE KIT•Used to replace the male and female connectors that are found on the regulator•Designed to save time and labor•Kit includes 1-piston plug, receptacle and one male and one female crimp terminal

FOR BIG TWIN AND XL MODELS

PRICE LIST

2112-0395

2112-0393

2112-0394

DS-3130580913-1703

2112-0366

201122C

201122B


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

628

PART # DESCRIPTION SUG. RETAILFOR ALL EVOLUTION BIG TWIN MODELSDS-222835 Chrome $49.95DS-222843 Black 49.95

REGULATOR PLUG GUARD•Designed to keep the regulator from unplugging from the stator

•Cast aluminum with a chrome or black finish•Easy bolt-on design, no drilling required•Includes mounting hardware•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2112-0102 For 97-08 FLHT, FLTR and FLHR models $79.952112-0561 For 01-11 FXST/FLST (except FXCW/C) 69.95

REGULATOR COVER•Two-piece, stamped-steel chrome-plated cover fits the stock regulator

•Open, well-vented design keeps things running cool

•Functional, decorative fasteners add a custom touch

•Vented cover has room inside to add lights for a cool accent


RETAILDS-330006 For 84-95 FLT and 84-94, 99 FXR; repl. OEM #74529-79T $14.95

CHROME REGULATOR MOUNT FOR RUBBER-MOUNTED MOTORS•Chrome regulator mount made of heavy-duty steel•Dual holes for custom applications

PART # DESCRIPTION SUG. RETAIL2112-0297 For 84-99 Softail models $94.95

REGULATOR MOUNT•CNC-machined from 6061 billet aluminum, then finished in chrome

•Fits most frames on front motor mount


PART # DESCRIPTION SUG. RETAILDS-330003 For 84-99 Softails $71.95

REGULATOR MOUNT•Chrome billet aluminum mount from Accutronix® allows custom mounting of regulators for a clean, smooth look

•Attaches to the front motor mount bolts•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-720018 For 84-99 Softail $45.95

CUSTOM REGULATOR MOUNT•Allows the regulator to be mounted down and back out of sight

•Highly chromed aluminum gives a great custom look•Requires two 1/4”-20 x 1/2” bolts for installing regulator mount and two 3/8”-16 x 23/4” bolts for installing mount to the frame

•Optional 10-24 holes on back of mount for ground wire


NOTE: May require removal of the oil filter for installation.


RETAIL1902-0398 For 01-06 FXST/FLST models; repl. OEM #74610-01 $22.957805-0012 For 89-99 FXST/FLST models; repl. OEM #74578-97 25.957805-0013 For 91-03 FXD models; repl. OEM #74577-97 25.957805-0076 For 91-03 XL; repl. OEM #74579-97 25.95

CHROME REGULATOR COVERS•Stamped steel cover fits over the existing regulator

•Includes chrome mounting hardware

PART # DESCRIPTION SUG. RETAILDS-330023 Regulator brackets for 85 FX and FL;

85-86 FXWG; repl. OEM #74533-75B $18.95

REGULATOR BRACKET•No drilling is required to mount this heavy-gauge, chrome-plated steel regulator bracket

•Exact replacement for the stock regulator mounting bracket

PART # DESCRIPTION SUG. RETAIL151100 For 84-99 Softail models $29.95

REGULATOR BRACKET•Flat-finish bracket mounts solid-state regulators

•Attaches to front motor mount bolts

1902-0398

7805-00762112-0102

DS-222835 DS-222843


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

629

PART # DESCRIPTION SUG. RETAILV-ROD/BIG TWIN/XL2113-0012 For 07-11 V-Rod VRSCA/D/DX/CX $109.952113-0009 For 02-06 V-Rod, 07 VRSCR 89.952113-0012 For 91-11 FXD, FXDWG, FXST, FLST 109.952113-0011 For 86-90 FLST; 84-90 FXST; 85 FXE 109.952113-0010 For 97-11 FLT, FLHT, FLTR, FLHR and H-D FL Trikes 139.952113-0013 For 84-96 FLT, FLHT 124.952113-0011 For 84-94 FXR 109.952113-0014 For 04-11 XL 89.952113-0012 For 97-03 XL 109.952113-0011 For 86-96 XL 109.95

PART # DESCRIPTION SUG. RETAILBUELL2113-0009 For 96-99 S1, 00-07 Blast1 $89.952113-0011 For 94-96 S2, S2T Thunderbolt, 88-90 RR1200,

89-93 RS1200, 91-93 RSS1200, 87 RR1000 109.952113-0012 For 94-02 S3, S3T Thunderbolt, M2 Cyclone,

X1 Lightning 109.95REPL. HARDWARE (5-PK.)2113-0082 For PART #s 2113-0010, 2113-0011, 2113-0012 and

2113-0013 2.402113-0085 For PART #s 2113-0009 and 2113-0014 2.401 Requires battery adapter kit from Buell.

DRAG SPECIALTIES BATTERIES•Specifically designed for high-performance engines that need extra cranking power•Superior engineering features include a radial grid design for maximum cranking amps•High vibration resistance•Spill-proof, pre-filled, pre-charged, maintenance-free sealed design•Batteries include brass spacers, stainless steel nuts, bolts and star washers•Made in the U.S.A.

FACTORY-ACTIVATED PART #

AGM MAINTENANCE-FREE PART #

YUASA REF. #

HARLEY-DAVIDSONOEM #

COLD CRANKING AMPS LENGTH WIDTH HEIGHT

TERMINALCONFIGURATION

2113-0009 - YTX14 65948-00 200 6” 37/16” 53/4” + -2113-0010 2113-0209 YIX30L 66010-97A 385 69/16” 5” 67/8” - +2113-0011 2113-0210 YTX20H-BS 65991-82B 310 67/8” 37/16” 61/8” + -2113-0012 2113-0211 YTX20HL-BS 65989-97A 310 67/8” 37/16” 61/8” - +2113-0013 2113-0212 YTX24HL-BS 66010-82B 350 81/8” 37/16” 63/8” - +2113-0014 2113-0213 YTX14L-BS 65958-04 200 6” 37/16” 53/4” - +

DRAG SPECIALTIES BATTERY CROSS REFERENCE

2113-0009

2113-0010

2113-0011

2113-0012

2113-0013

2113-0014

2113-0085


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

630

PART # DESCRIPTION SUG. RETAILBIG TWIN/XL2113-0211 For 91-11 FXD, FXDWG, FXST, FLST $89.952113-0210 For 86-90 FLST; 84-90 FXST; 85 FXE 89.952113-0209 For 97-11 FLT, FLHT, FLTR, FLHR and H-D FL Trikes 119.952113-0212 For 84-96 FLT, FLHT 104.952113-0210 For 84-94 FXR 89.952113-0213 For 04-11 XL 74.95

PART # DESCRIPTION SUG. RETAILBIG TWIN/XL (CONT)2113-0211 For 97-03 XL $89.952113-0210 For 86-96 XL 89.95BUELL2113-0210 For 94-96 S2, S2T Thunderbolt, 88-90 RR1200,

89-93 RS1200, 91-93 RSS1200, 87 RR1000 89.952113-0211 For 94-02 S3, S3T Thunderbolt, M2 Cyclone,

X1 Lightning 89.95

2113-0211

DRAG SPECIALTIES AGM MAINTENANCE-FREE•New fillable batteries from Drag Specialties!•Specifically designed for hard starting, high performance engines that need extra cranking power•Radial grid technology delivers higher cranking amps and superior performance•Special-absorbed glass-mat battery eliminates water loss, permitting the battery to be permanently sealed once it is filled with acid; Acid Pack included

•Superior vibration resistance and durability provides a long service life•Each battery includes a quick-connect harness specifically designed for Drag Specialties battery chargers•PART # 2113-0209 features a convenient, one-piece foldable handle for easy installation•PART #s 2113-0209, 2113-0210 and 2113-0211 feature new flush-mount terminals that eliminate the need for spacers ensuring a secure, vibration resistant and direct-path connection

2113-0209

2113-0210

2113-0212

2113-0213


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

PARTS UNLIMITED BATTERIESHIGH-PERFORMANCE AGM MAINTENANCE-FREE BATTERIES•Parts Unlimited is proud to offer a premium-quality, maintenance-free battery at a great low price

•Special absorbed-glass mat battery eliminates water loss, permitting the battery to be permanently sealed once it is filled with acid

•Acid pack included•Battery seals to prevent water loss•Hold charge three times longer than conventional batteries

•PART #2113-0107 features a convenient, one-piece foldable handle for easy installation

HIGH-PERFORMANCE FACTORY-ACTIVATED BATTERY•Packs more power, discharges less in storage and has a longer life than conventional batteries•Spill-proof design and construction have passed vibration and pressure differential spill-proof tests•Arrives ready to be put to work•PART #2113-094 features a convenient, one-piece foldable handle for easy installation

NOTE: Should be charged once a month when not in service.

631

PART # YUASA REF. # SUG. RETAIL2113-0021 YTX20H-BS $75.952113-0022 YTX20HL-BS 75.95

PART # YUASA REF. # SUG. RETAIL2113-0094 YIX30L $123.952113-0107 YIX30L-BS 123.95

PART # YUASA REF. # SUG. RETAIL2113-0205 YTX24HL-BS $94.95

STANDARD BATTERY AND BATTERY KIT•Standard batteries and now new fillable battery kits!•High-quality, low-cost alternative to the OEM battery replacement•Meets or exceeds OEM specifications•Feature an impact- and vibration-resistant polypropylene case and cover•Fiberglass separators improve acid flow•Battery Only includes battery, hardware kit and vent tube- clear•Battery Kit includes battery, pre-measured acid pack, filler tube- red, hardware kit and vent tube- clear

DESCRIPTIONBATTERY ONLY PART #

SUG. RETAIL

BATTERY KIT PART #

SUG. RETAIL

YUASA REFERENCE #

For Custom 12V appl. R12N5.5A-3B $26.95 2113-0144 $28.95 Y12N5.5A-3B

HEAVY-DUTY BATTERIES AND BATTERY KITS•Heavy-duty batteries and now new fillable battery kits!•Powerful starting power at a great price!•Parts Unlimited Heavy-Duty batteries are built to the same exacting specifications and quality-control standards as OE

•Rugged and provide more cranking power over standard batteries•Lead calcium alloy reduces water loss and service by 66% compared to standard batteries

•Includes anti-sulfation chemical formulated to reduce sulfate crystal buildup on the battery plates

•Reduces self-discharge for longer time between charges•Fiberglass separators improve acid flow•Battery Only includes battery, hardware and vent tube- clear•Battery Kit includes battery, pre-measured acid pack, filler tube- red, hardware kit and vent tube- clear

DESCRIPTIONBATTERY ONLY PART #

SUG. RETAIL

BATTERY KIT PART #

SUG. RETAIL

YUASA REFERENCE #

84-96 FLT, FLHT RC50-N18L-A2 $56.95 2113-0199 $61.95 Y50-N18L-A97-11 FLT, FLHT and H-D FL Trikes RCB30L-B 96.95 2113-0197 99.95 YB30L-B84-94 FXR RCB16-B 61.95 - - YB16B86-96 XL/XLH RCB16-B 61.95 - - YB16B

2113-01072113-0021

DESCRIPTION HIGH-PERFORMANCE AGM MAINTENANCE-FREE HIGH-PERFORMANCE FACTORY-ACTIVATED91-11 FXST/FLST, Dyna Glide 2113-0022 -86-90 FLST, 84-90 FXST, 85 FXE 2113-0021 -84-96 FLT, FLHT 2113-0205 -97-11 FLT, FLHT and H-D FL Trikes 2113-0107 2113-009484-94 FXR 2113-0021 -86-96 XL/XLH 2113-0021 -97-03 XL 2113-0022 -


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

632

YUASA BATTERIES•The largest motorcycle battery manufacturer in the world•Over 50 years of engineering expertise ensures high-quality construction for long and trouble-free service

GYZ-SERIES•Heavy-duty terminals; patent pending•Flush-mounted terminals with no spacers needed•Extreme vibration resistance and improved charge recovery•Features a higher capacity and longer life•Factory-activated, spill-proof design

HIGH-PERFORMANCE AGM MAINTENANCE-FREE BATTERIES•This new generation of maintenance-free batteries delivers higher cranking amps for vehicles that require extra starting power

•Additional cranking amps make these the most powerful batteries on the market

AGM MAINTENANCE-FREE•Special-absorbed glass-mat battery eliminates water loss, permitting the battery to be permanently sealed once it is filled with acid

•Acid Pak included•Truly the world’s finest “install it and forget it” motorcycle battery

FACTORY-ACTIVATED•Packs more power, discharges less in storage and has a longer life than conventional batteries

•Spill-proof design and construction have passed vibration and pressure differential spill-proof tests

CONVENTIONAL•High-quality, low-cost alternative•Shipped dry

YuMiCRON•The most powerful lead-acid battery of its size•Appears as original equipment on more and more big bikes

YuMiCRON CX•Lead/calcium battery has 5% to 8% more cranking power than the high-output YuMicron•Requires minimal servicing

PART # YUASA REF. # DESCRIPTION SUG. RETAILDS-325024 YTX20L-BS 91-11 FXST/FLST, 97-11 FXD/FXDWG, 97-03 XL $116.95DS-325030 YTX20-BS 84-90 FXST/FLST, 84-94 FXR, 85 FXE, 86-96 XL 116.95DS-325757 Y50-N18L-A 84-96 FLT/FLHT 123.95

POWER MAX MAINTENANCE-FREE BATTERY•Completely sealed black case can be mounted in almost any position•Advanced technology allows very high power discharge•Accepts a high rate of recharge without damage to the battery•Can be recharged over 90% in less than one hour on a regulated charger•Batteries MUST BE CHARGED in the same manner as any lead acid battery•When not in service, batteries should be charged once a month•PART #S DS-325024 and DS-325030 measure 67/8” L x 37/16” W x 61/8” H

NOTE: PART #DS-325757 will not fit 80-84 FLH models.

DESCRIPTION GYZ-SERIES

HIGH-PERFORMANCE AGM MAINTENANCE-FREE

AGM MAINTENANCE-FREE

AGM MAINTENANCE-FREE FACTORY-ACTIVATED

HIGH-PERFORMANCE FACTORY-ACTIVATED CONVENTIONAL YuMiCRON YuMiCRON CX

12V Custom appl. - - - - - Y12N5.5A-3B - -91-11 FXST/FLST, Dyna Glide 2113-0109 YTX20HL-BS YTX20L-BS 2113-0103 2113-0104 - - YB16HL-A-CX86-90 FLST, 84-90 FXST, 85 FXE - YTX20H-BS YTX-20BS - - - YB16-B YB16-B-CX84-96 FLT, FLHT - YTX24HL-BS - - YTX24HL - Y50-N18L-A Y50-N18L-A-CX97-11 FLT, FLHT, FLHR, FLTR and H-D FL Trikes - - 2113-0102 YIX30L - - YB30L-B -84-94 FXR - YTX20H-BS YTX-20BS - - - YB16-B YB16-B-CX04-11 XL - - 2113-0016 - - - - -97-03 XL 2113-0109 YTX20HL-BS YTX20L-BS 2113-0103 2113-0104 - - -86-96 XL/XLH - YTX20H-BS YTX-20BS - - - YB16-B YB16-B-CX08-11 VRSC V-Rod - - - 2113-0103 2113-0104 - - -02-07 VRSC V-Rod - - - - 2113-0106 - - -BUELL99-02 X1 Lightning - - - 2113-0103 2113-0104 - - -04-08 XB12R Firebolt, XB12S Lightning - - - - 2113-0106 - - -06-09 XB12X Ulysses - - - - 2113-0106 - - -

BATTERY APPLICATIONS CHART

PART # YUASA REF. # SUG. RETAIL2113-0016 YTX14L-BS $96.952113-0102 YIX30L-BS 145.952113-0103 YTX20L 107.952113-0104 YTX20HL 115.952113-0106 YTX14H 103.952113-0109 GYZ20HL 149.95Y12N5.5A-3B Y12N5.5A-3B 38.95

PART # YUASA REF. # SUG. RETAILY50-N18L-A Y50-N18L-A $75.95Y50-N18L-A-CX Y50-N18L-A-CX 94.95YB16-B YB16-B 72.95YB16-B-CX YB16-B-CX 91.95YB16HL-A-CX YB16HL-A-CX 89.95YB30L-B YB30L-B 106.95YIX30L YIX30L 146.95

PART # YUASA REF. # SUG. RETAILYTX-20BS YTX-20BS $105.95YTX20H-BS YTX20H-BS 113.95YTX20HL-BS YTX20HL-BS 113.95YTX20L-BS YTX20L-BS 105.95YTX24HL YTX24HL 131.95YTX24HL-BS YTX24HL-BS 129.95

PRICE LIST


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

633

PART # DESCRIPTION SUG. RETAILCLEAR79-3001 For 84-88 FXST, FLST; cable lengths 8”, 15” and 17” $39.9579-3002 For 89-07 FXST, FLST; cable lengths 10” and 12” 27.9579-3003 For 84-88 FXR; cable lengths 12”, 16” and 16” 39.9579-3005 For 91-03 FXD; cable lengths 8”, 8” and 15” 27.9579-3008 For 89-92 FLHT, FLT; cable lengths 33” and 33” 39.9579-3009 For 93-06 FLHT, FLT; cable lengths 8”, 13”, 13” 27.9579-3010 For 86-03 XL; cable lengths 11” and 16” 27.95TRANSLUCENT BLACK79-3001-1 For 84-88 FXST, FLST; cable lengths 8”, 15” and 17” 39.9579-3002-1 For 89-07 FXST, FLST; cable lengths 10” and 12” 27.9579-3003-1 For 84-88 FXR; cable lengths 12”, 16” and 16” 39.9579-3004-1 For 89-94 FXR; cable lengths 12” and 16” 27.9579-3005-1 For 91-03 FXD; cable lengths 8”, 8” and 15” 27.9579-3007-1 For 84-88 FLHT, FLT; cable lengths 9”, 30” and 30” 44.9579-3008-1 For 89-92 FLHT, FLT; cable lengths 33” and 33” 39.9579-3009-1 For 93-06 FLHT, FLT; cable lengths 8”, 13”, 13” 27.9579-3010-1 For 86-03 XL; cable lengths 11” and 16” 27.95

BATTERY CABLE KITS•4-gauge cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and superior flexibility

•Increase starter performance by supplying maximum battery current to the starter motor

•Contain all battery cables to replace OEM cables•Available in translucent black or clear•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILCUSTOM CABLE KITS79-3303 Clear kit $166.9579-3303-1 Translucent black kit 166.9579-3303-2 Translucent red kit 166.95CABLE AND HARDWARE REPLACEMENTS/TOOLS2113-0039 25’ clear bulk cable 109.952113-0040 25’ translucent black bulk cable 109.9599-1007 1/4” terminals (25-pk.) 1.5099-1008 5/16” terminals (25-pk.) 1.5099-1009 3/8” terminals (25-pk.) 1.502120-0297 11/2” heat shrink tubing, black (25-pk.) 13.952120-0298 11/2” heat shrink tubing, red (25-pk.) 13.9599-1012 Crimper tool 55.95

CUSTOM CABLE KITS•Build custom-length cables for an exact fit•Each kit contains the following: 25’ cable (1), 1/4” terminals (20),

3/8” terminals (8), 5/16” terminals (12), black heat shrink (40) and red heat shrink (12)

•Using 12” cables as an example, this 25’ custom cable kit will make 27 cables (a 12” cable uses 11” of cable and two terminal ends), for a substantial savings over precut lengths

•Available in clear, black or red•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILTRANSLUCENT CLEAR78-107 7” $8.9578-108 8” 9.9578-109 9” 11.9578-110 10” 12.9578-111 11” 14.9578-112 12” 15.9578-113 13” 17.9578-114 14” 18.9578-115 15” 20.9578-116 16” 21.9578-117 17” 23.9578-119 19” 24.95

PART # DESCRIPTION SUG. RETAILTRANSLUCENT CLEAR (CONT)78-121 21” $26.9578-123 23” 27.9578-125 25” 29.9578-133 33” 34.95TRANSLUCENT BLACK78-107-1 7” 8.9578-108-1 8” 9.9578-109-1 9” 11.9578-110-1 10” 12.9578-111-1 11” 14.9578-112-1 12” 15.9578-113-1 13” 17.95

PART # DESCRIPTION SUG. RETAILTRANSLUCENT BLACK (CONT)78-114-1 14” $18.9578-115-1 15” 20.9578-116-1 16” 21.9578-117-1 17” 23.9578-119-1 19” 24.9578-121-1 21” 26.9578-123-1 23” 27.9578-125-1 25” 29.9578-130-1 30” 32.9578-133-1 33” 34.95

BATTERY CABLES•Increase starter performance by supplying maximum battery current to the starter motor

•4-gauge cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and flexibility

•Specially rated 125° C, oil- and grease-resistant, ultra-flexible translucent jacket guarantees excellent performance (available in translucent black or clear)

•All cables manufactured with 11/4” terminal and 15/16” terminal


79-3001

2120-0297 2120-0298

99-1012

79-3303

78-108

78-108-1

79-3002-1


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

634

PART # DESCRIPTION SUG. RETAILCOMPLETE KITSDS-242131 For 89-07 Softail models, cable lengths 10”/12” $42.95DS-242134 For 84-88 Softail models, cable lengths 8”/15”/17” 61.952113-0208 For 09-11 FLT and H-D FL Trike; cable lengths 9”

w/ 17” auxiliary wire/13” w/ 5” auxiliary wire 49.952113-0206 For 07 FLT; cable lengths 13”/17” w/ 8” auxiliary wire 46.952113-0207 For 02 FLT; cable lengths 10”/14” w/ 9” auxiliary wire 46.952113-0032 For 93-06 FLT, FLHT models, cable lengths 13”/14”/8” 61.95DS-242136 For 89-92 FLT models, cable lengths 33”/33” 66.95DS-242137 For 84-88 FLT models, cable lengths 9”/30”/30” 66.95DS-242141 For 91-05 Dyna models, cable lengths 10”/15” 46.95DS-242139 For 84-94 FXR models, cable lengths 12”/16” 42.95DS-242140 For 82-94 FXR models, cable lengths 12”/16”/16” 61.95DS-242144 For 86-03 XL models, cable lengths 11”/16” 42.952113-0033 For 04-07 XL models, cable lengths 13”/14” 42.95

PART # LENGTH SUG. RETAILINDIVIDUAL CABLES (BLACK)2113-0035 5” $12.952113-0036 6” 12.95DS-242057 7” 14.95DS-242058 8” 15.95DS-242059 9” 17.95DS-242060 10” 19.95DS-242061 11” 22.95DS-242062 12” 24.95DS-242063 13” 27.95DS-242064 14” 29.95

PART # LENGTH SUG. RETAILINDIVIDUAL CABLES (BLACK) (CONT)DS-242065 15” $31.95DS-242066 16” 33.95DS-242067 17” 36.952113-0037 18” 38.95DS-241966 19” 40.952113-0038 20” 43.95DS-241950 21” 45.95DS-241954 23” 47.95DS-242068 25” 49.95DS-242069 32” 55.95

BATTERY CABLES•Manufactured from 4-gauge, 1,650-strand tinned copper wire with a super flexible silicone jacket

•Unique lug design (99.9% pure electrolytic copper) provides a positive connection with greater conductivity and dependable service

•These cables will deliver more cranking power with less voltage drop than any cable on the market today•Available in black•Cables are available in kits or individually•Kits include cables for required stock applications•Individual cables can be used for universal/custom positive or negative applications•Made in the U.S.A.

PART #CABLE LENGTH

SUG. RETAIL

POSITIVE BATTERY CABLE2113-0054 6” $19.952113-0055 8” 21.952113-0056 10” 26.952113-0057 12” 31.95

PART #CABLE LENGTH

SUG. RETAIL

POSITIVE BATTERY CABLE (CONT)2113-0058 14” $35.952113-0059 16” 40.952113-0060 18” 45.95

PART #CABLE LENGTH

SUG. RETAIL

NEGATIVE BATTERY CABLE2113-0061 6” $19.952113-0062 8” 21.952113-0063 10” 26.952113-0064 12” 31.95

PART #CABLE LENGTH

SUG. RETAIL

NEGATIVE BATTERY CABLE (CONT)2113-0065 14” $35.952113-0066 16” 40.952113-0067 18” 45.95

BATTERY CABLE WITH AUXILIARY WIRE•The perfect choice when doing custom wiring work•Positive battery cable with auxiliary wire eliminates stacking cables on the battery•Perfect for wiring directly to the terminal block, regulator or any accessory•Positive cable is 18K gold-plated and tinned copper 1666 strand Mega Cable•Auxiliary wire is 12-gauge tinned copper 259 strand Mega Cable•Negative battery cable is the perfect solution for the ground wire on custom bikes•Eliminates poor electrical ground•Install the 4-gauge wire to the transmission and the 12-gauge wire to any accessory for the ground•Auxiliary wire measures 12” L on both positive and negative battery cable wires

“EXTREME” DUTY BATTERY CABLES•Flexible #2 gauge, 2,000-strand copper wire•180A rating•Black rubber-coated cables feature copper-coated tin lugs with glued heat-shrink sleeves to prevent corrosion

•Complete kit (PART #2113-0105) includes one positive cable with finished lead to 40 amp Maxi Panel and one negative cable with ground wire

•Made in the U.S.A.PART # DESCRIPTION CABLE LENGTHS SUG. RETAIL7805-3020 For 89-07 FXST/FLST 10”/12” $51.952113-0017 For 91-05 FXD/FXDWG 10”/15”/8” 77.957805-3022 For 89-94 FXR 12”/16” 53.952113-0018 For 93-08 FLHT/FLT 13”/14”/8” 77.95

PART # DESCRIPTION CABLE LENGTHS SUG. RETAIL2113-01051 For 09-11 FLHT/FLT

and H-D FL Trike - $77.957805-3024 For 86-03 XL 11”/16” 54.952113-0019 For 04-07 XL 12”/13” 52.951 Complete kit; includes positive cable with finished lead to 40

amp Maxi panel and negative cable with ground wire.


RETAILDS-174935 Bottom pads for 84-E85 FX,

FXWG, FXST; 84 FXR; 86-96 XL; repl. OEM #66103-74A (6.5” L x 3.875” W) $3.95

BATTERY PADS•Top-quality pads absorb vibration and retain their shape

•Available in top and bottom styles•Made in the U.S.A.•Sold in 10-pk.

PART # DESCRIPTION SUG. RETAILDS-310480 For 85-94 and L95-96

FXST, FLST; repl. OEM #66210-85B $7.95

OEM-STYLE BATTERY CUSHION•Rubber battery cushion is acid-, oil- and heat-resistant

•Sold each

PART # DESCRIPTION SUG. RETAIL2113-0077 Battery pad $2.95 (ea.)

BATTERY PAD•1/8” low-density neoprene with pressure sensitive, removable liner on one side that exposes the adhesive for contact

•Pad is oversized so it can be trimmed into a top or bottom pad to fit all applications

•Can be cut into irregular shapes for anti vibration padding, seat bottoms, dash panels etc.

•Sold in 5-pk.•Measures 5” x 8”

2113-0054

2113-0061


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

635

PART # DESCRIPTION SUG. RETAIL2212-0029 Black $39.95

PART # DESCRIPTION SUG. RETAIL2212-0030 Chrome $39.95

LED BATTERY GAUGE•Lets you know if your motorcycle’s charging system is working with just a glance

•Green LED indicates normal operating range of 12.5 to 14.5V•Amber LED warns the bike is not charging•If reading drops below 10V or exceeds 15V, flashing red LED alerts the rider

•Simple two-wire connection•Gauge measures approximately 2” L x 3/4” W x 3/16” H; daylight sensor automatically adjusts LED brightness

FUSE HOLDER•Standard ATC 4-way fuse holder with a clear water-tight (sealed) cover

•50-Amp max for all branches•.250 male blade (side blade insertion)•Mounting holes center-to-center are 2.56”•Mounting hole diameter is 7/32”


PART # DESCRIPTION SUG. RETAIL2120-0220 Fuse holder $13.95

PART # DESCRIPTION SUG. RETAILDS-189035 15A fuse holder (ea.) $4.95

UNIVERSAL FUSE HOLDER•Rated at 15A; 15A fuse included•Sold each

BATTERY OVERFLOW CATCH TANK•Prevents battery acid overflow onto chrome or painted surfaces while still providing proper venting

•Can be mounted anywhere near battery, along frame rail

•High-impact plastic catch 3/4” dia. x 4” L•Includes cable ties and tubing

PART # DESCRIPTION SUG. RETAILP607 Battery acid catch tank $5.95

PART # DESCRIPTION SUG. RETAILOCM-1 Dyna charge monitor $49.95

PART # DESCRIPTION SUG. RETAILDVM-1 Dyna voltage monitor $49.95

CHARGE MONITOR•Allows user to track electrical system voltage on any vehicle with a normal 12V charging system

•When the “normal” green light is on, the system voltage is normal and the battery is being charged correctly; if the “high” red light is on, the system voltage is too high and damage to the battery may result; when the “low” red light is on, the system voltage is too low and the battery is being discharged

•The above indications are only valid with the engine running•Measures 15/8” L x 1” W x 1/2” H•Made in the U.S.A.

VOLTAGE MONITOR•Allows the user to track battery voltage

•Primary use is determining when to recharge a battery in a total loss application; commonly found in drag racing

•When the green light is on, the battery is fully charged; when the amber light is on, there is still sufficient voltage to operate the ignition and other accessories; when the red light is on, the battery should be charged as soon as possible

•Measures 15/8” L x 11/8” W x 1/2” H•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL151308 Battery eliminator $41.95

BATTERY ELIMINATOR•Boosts spark voltage at cranking; eliminates flickering lights at low engine speed

•Designed for use on generator models only, this kit comes complete with a shock-resistant mounting clamp and attachment hardware


PART # DESCRIPTION SUG. RETAILFOR CUSTOM APPLICATIONS2113-0041 Smooth $235.952113-0042 Holes 255.95

DELISLE BATTERY BOXES•Machined billet aluminum battery boxes accept batteries that measure 35/16” x 67/8” or smaller

•Available in smooth or holes style with a stainless mesh filler

•Polished finish•Includes hardware•Made in the U.S.A.

2113-0041 2113-0042

2212-0029 2212-0030


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

DYNAMIC DUO AIR HORN KITS•Dual trumpet air horn set•Command attention; loudest horns available

•Beautifully chrome-plated or black finish horns with black powder-coated brackets

•Kits are complete, including compressor and braided stainless air line•Compressor mounts under stock chrome horn cover•Include Nose Cone Dirt Guards•Will not fit with fairing lowers•Made in the U.S.A.

636

PART # DESCRIPTION SUG. RETAILDS-324112 For 97-05 FXD, 97-03 XL; repl. OEM #66718-01 (AGM battery only) $21.95DS-324126 For 97-05 FXD, 99-04 FXDX, 01-03 FXDXT; repl. OEM #66375-97 21.95DS-324100 For 91-96 FXD, 85 FXE, 82-99 XL; repl. OEM #66347-91, raised panel (viewing window) 21.95

BATTERY COVERS•Feature precise formed covers for sealed and conventional batteries

NOTE: The use of AGM sealed maintenance-free batteries requires battery side covers designed for the AGM battery.

PART # DESCRIPTION SUG. RETAILDS-324119 For 97-05 FXD; repl. OEM #66368-97 $15.95DS-324114 For 91-96 FXD; repl. OEM #66368-90 15.95

PART # DESCRIPTION SUG. RETAILDS-324118 For 85 FXE; 85-86 FXWG; 86-96 XL;

repl. OEM #66367-73 $15.95DS-324115 For 97-03 XL; repl. OEM #66367-97 15.95

BATTERY TOP COVERS•Chromed replacement battery top covers fit precisely and feature vibration-absorbing cushions

PART # DESCRIPTION SUG. RETAILDS-317466 For 84-99 FXST, FLST; repl. OEM #66109-93 and 66111-93 (rubber) $9.95DS-317465 For 84-99 FXST, FLST, 80-92 FLT, FLHT; repl. OEM #66105-77 (rubber) 6.95DS-317468 For 85 FXE, 85-86 FXWG, 86-97 XL; repl. OEM #66476-73/73A (stainless steel) 13.95DS-317469 For 98-03 XL; repl. OEM #66476-98 (stainless steel) 13.952113-0108 For 02-10 V-Rod; repl. OEM #66017-01 (rubber) 4.95

BATTERY STRAPS•High-quality replacement battery straps•Meet or exceed OEM specifications

PART # DESCRIPTION SUG.RETAILCHROME2107-0006 For 99-11 Twin Cam $164.952107-0005 For 92-99 Evolution (except FXR models) 164.95

PART # DESCRIPTION SUG.RETAILBLACK2107-0077 For 99-11 Twin Cam $164.952107-0076 For 92-99 Evolution (except FXR models) 164.95

PART # DESCRIPTION SUG. RETAILMINI-BEAST II AIR HORN (MEASURES 93/4” L X 61/4” H X 31/2” D, EXCLUDING MOUNTING TAB)2107-0054 Chrome $189.952107-0057 Black gloss 189.952107-0058 Black wrinkle 189.95MINI-BEAST III TWIN CAM 88 STYLE AIR HORN (MEASURES 83/4” L X 51/4” H X 31/4” D)2107-0079 Chrome 189.95

PART # DESCRIPTION SUG. RETAILMINI-BEAST IV TWIN CAM 96 STYLE AIR HORN (MEASURES 83/4” L X 51/4” H X 31/4” D)2107-0078 Chrome $189.95MINI-BEAST V AIR HORN (MEASURES 8” L X 51/4” H X 31/4” D)2107-0059 Chrome 249.952107-0060 Black wrinkle w/ raw fins 189.952107-0061 Black gloss 189.952107-0062 Black gloss w/ diamond cut fins 249.95

MINI-BEAST AIR HORN•Self-contained air horn fits most H-D motorcycles

•Dual trumpets emit 128 dB•Mini-Beast II, III and IV feature covers made from 18-gauge steel

•Mini-Beast V features cover made from aluminum

•Plug-n-play wiring harness for easy installation


DS-324112 DS-324126 DS-324100

DS-324119DS-324114 DS-324118

DS-324115

DS-317466

DS-317465

DS-317468

2107-0005

2107-0054

2107-0059

2107-0060 2107-0061 2107-0062

2107-0057 2107-0058

2107-0079

2107-0078

2107-0077 2107-0076


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

637

MAGNUM ELECTRIC HORN SET AND HARDWARE KIT•Featuring an output of 118 dB, these are the loudest electric horns you can buy

•Direct replacement for most 12V electric horns

•Horn set includes two chrome finish horns (one high and one low tone), mounting brackets and installation instructions

•Hardware kit includes fuse, all wiring, mounting hardware and instructions (sold separately)

NOTE: The use of a 30A relay (not included) to achieve maximum volume and protect the stock electrical system is recommended.PART # DESCRIPTION SUG. RETAIL2107-0067 Horn set $79.952107-0065 Hardware kit for 09-11 FLHR/FLHT/FLHX/FLTR and H-D FL Trike 39.952107-0066 Hardware kit for multiple applications 39.95


RETAILDS-272123 For restoration or

installation on late-model Glides and customs; repl. OEM #69001-42 $29.95

REPLICA HORN•A reproduction of the “no longer available” early H-D 12V horn with a chrome front that came standard on 42-52 45”, 42-49 61” and 74”; and 53-54 Servi-Car models

•Comes with mounting bracketELECTRIC HORNS•Chromed twin horns with a relay•Produce sound levels comparable to those of a semi’s horn (approximately 107 dB)

•12V horn fits all motorcycles and comes with mounting hardware

•Sold in sets PART # DESCRIPTION SUG. RETAIL2107-0045 21/2” slotted

chrome horn $14.95

CHROME MINI HORN•Small horn can be mounted out of sight•Stamped steel construction with a chrome finish and slotted face looks great

•12V operation; fully adjustable universal mount

•Includes chrome 31/4” mounting strap

PART # DESCRIPTION SUG. RETAILDS-272128 Electric horns $42.95

MULTI FIT UNIVERSAL AIR HORNS•Designed for easy installation on a variety of motorcycles

•Mount horns to frame or engine guards only; CANNOT be mounted to Harley-Davidson’s original horn mount or directly to motor

•Waterproof dual-trumpet air horns replace stock horn and give a loud warning blast of 128 dB

•Trumpets, mounts and brackets are triple-plated chrome•Includes horn assembly, air compressor, relay, simple wiring, cone-shaped dust/bug covers and complete installation instructions

•Air compressor creates instant air pressure to the horns and can be mounted in various locations including under the seat, fuel tank or one of the side covers

•Uses the stock horn button; bolt-on, plug-in installation


2107-0068

2107-0083

AIR HORNS•Waterproof dual-trumpet air horns replace stock horn and give a loud warning blast of 128 dB

•Trumpets, mounts and brackets are triple-plated chrome

•Includes horn assembly, air compressor, relay, simple wiring, cone-shaped dust/bug covers and complete installation instructions

•Air compressor creates instant air pressure to the horns and mounts either under the seat, behind right side cover or down tube of frame (mounting position varies per model)

•Uses the stock horn button; bolt-on, plug-in installation

PART # DESCRIPTION SUG. RETAILFOR MOST H-D MODELS WITH LEFT-SIDE “BETWEEN THE CYLINDERS” OEM MOUNT2107-0064 Chrome $199.952107-0082 Black 199.95

2107-0064 2107-0082

2107-0067 2107-0065


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

638

12V HORN WITH CHROME COVER•Custom horn comes with snap-on chrome cover

•Features spade-type terminal connectors and injection-molded cover

•33/8” dia. cover: 113 dB signalROUND HORN WITH CHROME COVER•12V horn can be mounted in a variety of locations

•Cover features billet aluminum construction with a slotted design

•Includes mounting hardware•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-271996 Slotted $24.95DS-271997 Mag 24.95

CHROME HORNS•12V horns emit loud (113 dB) signal•4” in diameter; universal mount•Sold each


RETAILDS-272111 Chrome electric horn $18.95

CHROME ELECTRIC HORN•A durable high-pitched, 12V horn that comes with a mounting flange

•Features highly chromed finish and universal mount

•90 dB signal

PART # DESCRIPTION SUG. RETAILDS-272127 12V horn $24.95

PART # DESCRIPTION SUG. RETAILDS-280610 Round horn w/ billet cover $79.95

12V HORNS•Loud, deep-toned 12V two-terminal chrome horns

PART # DESCRIPTION SUG. RETAIL2107-0009 For all Big Twin/XL with engine-mounted horn $224.95

FINNED HORN•Unique style allows the engine to show through the teardrop silhouette

•Chrome-plated billet aluminum construction•Includes 100 dB horn•Matching air cleaner kits available separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILK11-0100 Black $9.95K11-0101 Chrome 10.95

ECONOMY HORNS•Add style and safety to your bike•Both are just 23/4” in diameter, but emit a loud 105 dB; 12V•Small enough to mount almost anywhere•Sold each

PART # DESCRIPTION SUG. RETAILFOR 99-10 BIG TWIN AND XL MODELS W/ COWBELL-STYLE HORN COVER2107-0055 Without logo $109.952107-0056 With logo 109.95

HORN COVERS•18-gauge stamped steel, polished and show-chrome plated•Direct replacement of stock “cowbell” H-D horn cover•Matches the Klock Werks derby covers for a beautiful custom look


DS-271996 DS-271997

K11-0100K11-0101

2107-0007 2107-0008

2107-0021

2107-0020

2107-0056

2107-0055


HORN COVERS•Round horn cover accepts any 5-hole point cover•Made of steel and finished in chrome or black powder-coated finish•Replaces factory “cowbell” shaped horn cover on 91-11 Big-Twin models

2107-0080 2107-0081

PART # SIZE DECIBAL RATING SUG. RETAIL2107-0008 21/2” 1.5 amp 90-105 $5.952107-0020 21/2” 1.5 amp 90-105 5.952107-0007 3” 3 amp 90-115 11.952107-0021 4” 3 amp 90-115 11.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

639

PART # DESCRIPTION SUG. RETAILFOR 91-11 MODELS W/ COWBELL-STYLE HORN COVER2107-0048 Tri-Bar, chrome $299.952107-0049 Tri-Bar, black 299.95

PART # DESCRIPTION SUG. RETAILFOR 91-11 MODELS W/ COWBELL-STYLE HORN COVER (CONT)2107-0050 Smooth, chrome $299.952107-0051 Smooth, black 299.95

HORN COVERS•Stylish, clean custom look that complements the Battistinis collection of products

•Machined from 6061 T-6 aluminum•Direct replacement of stock “cowbell” H-D horn cover

•Utilizes the stock factory horn•Available in show-winning chrome and black anodized with re-machining highlights


PART # DESCRIPTION SUG. RETAILFOR 91-11 MODELS W/ “COWBELL” STYLE HORN COVER2107-0027 Chrome $49.952107-0047 Black chrome 54.95

SKULL HORN COVER•Chrome or black chrome ABS cover sticks to the stock cowbell

•Sold each

PART # DESCRIPTION SUG. RETAIL2107-0013 For 91-11 Big Twin $79.95

V-SHIELD HORN COVER•For use with horns that are located between the cylinders

•Beautiful chrome finish

PART # DESCRIPTION SUG. RETAILCHROME2107-0025 W/ black skull insert $31.952107-0041 W/ black profile skull insert 33.952107-0026 W/ black cross insert 31.952107-0043 Smooth 29.952107-0052 W/ black flame 31.95

PART # DESCRIPTION SUG. RETAILBLACK2107-0028 W/ chrome skull insert $29.952107-0042 W/ chrome profile skull insert 33.952107-0029 W/ chrome cross insert 29.952107-0044 Smooth 29.952107-0046 Smooth, black wrinkle 29.952107-0053 W/ chrome flame 31.95

HORN COVERS•Steel construction finished in chrome or black-powder coat; diameter of approximately 45/8”•Contrasting screen detail in maltese, skull or flame design•Round horn covers replace the stock “cowbell” cover found on most 91-10 Big Twin and XL models (uses stock horn)

PART # DESCRIPTION SUG. RETAILFOR 25/8” DIA. HORNS2107-0016 Crusader Maltese Cross $49.952107-0017 Reflections 49.952107-0018 Warrior 49.952107-0019 Smooth 49.95

PART # DESCRIPTION SUG. RETAILFOR 3” DIA. HORNS2107-0035 Crusader Maltese Cross $56.952107-0036 Ball-milled 56.952107-0037 Warrior 56.952107-0038 Smoothie 56.95

HORN COVERS•Quality chrome-plated billet aluminum construction

•Available in four styles•Made in the U.S.A. 2107-0016

2107-0041

2107-0025

2107-0043

2107-0052

2107-0029

2107-0044

2107-00172107-0019

2107-00362107-0037

2107-0027 2107-0047

2107-0048 2107-0049

2107-0050

2107-0051


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

640

PART # DESCRIPTION SUG. RETAILDS-272112 For 85 FXS, 85 FX (except FXWG),

84-93 FXR and 86-93 XL models $22.95

CUSTOM ROUND KEY IGNITION SWITCH•Round key design with three-position activation: off, ignition only, or ignition and lights

•Sold individually

PART # DESCRIPTION SUG. RETAILDS-272113 Round key ignition switch (ea.);

repl. OEM #71428-90A $22.95

ROUND KEY IGNITION SWITCH•Features the round key design found on all Dyna Glide models (except FXDWG)

•Two-position activation with a positive detent to retain the key in the off position

PART # DESCRIPTION SUG. RETAILDS-272187 For 93-08 FXDWG, 96-11 FXST/FLST and

94-11 FLHR models; repl. OEM #s 71501-93 and 71313-96 $29.95

SIDE HINGE IGNITION SWITCH•Three-terminal ignition switch

PART # DESCRIPTION SUG. RETAILDS-272098 Six-terminal ignition switch for 84-95;

repl. OEM #71501-73A (incl. late-model die-cast top and early “tin-” style cap) $24.95

DS-272101 Repl. key for DS-272098 and DS-272097 3.95

IGNITION SWITCH•Replacement ignition and light switch with locks for Fat Bob-style dash panels

•This switch meets or exceed all OEM specifications

•Includes two flat keys

PART # DESCRIPTION SUG. RETAILDS-272114 For 85 FX (except FXWG); 84-93 FXR and

86-93 XL models; repl. OEM #71425-77 $15.95

IGNITION SWITCH•Chrome replacement ignition and light switch•3 position switches•Includes two keys

PART # DESCRIPTION SUG. RETAIL0909-0202 For 84-95 Fat Bob-style dashes;

repl. OEM #71501-73A $38.95

ROUND KEY INTERNAL CONTACT SWITCH•Metal body construction with a chrome finish•Printed circuitry contacts with six-lug terminals•Includes two round keys

PART # DESCRIPTION SUG. RETAIL2106-0107 Off/On/Start ignition switch $24.95

IGNITION SWITCH•Features off/on/start just like a car ignition switch•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2106-0038 For 93-08 FXDWG, 96-11 FXST/FLST and

94-11 FLHR models; repl. OEM #s 71501-93 and 71313-96 $44.95

SKULL IGNITION SWITCH•Replacement three-terminal ignition switch•Side hinge top features a unique chrome skull•Flat key design; includes two keys

DS-272098


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

641

PART # DESCRIPTION SUG. RETAILDS-272134 Ignition switch $29.95

IGNITION/STARTER SWITCH•For custom applications•Switch has off/on/start; works like a car switch

•Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL2106-0031 Ignition switch w/ round key cover $132.952106-0060 Ignition switch w/ Dead End key cover 132.95

IGNITION/START SWITCHES•Features off/on/start just like a car ignition switch

•Comes with chrome 6061 billet aluminum key cover for a concealed look


PART # DESCRIPTION SUG. RETAIL2106-0055 Chrome $228.952106-0056 Black-anodized 228.95

IGNITION SWITCHES•CNC-machined aluminum with built-in starter relay and 30A breaker

•Three-way switch design: off/on/start•Measure 5” L; mounting holes are 31/2” on center•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2106-0016 Ignition/starter switch $53.95

IGNITION/STARTER SWITCH•Marine-grade ignition/starter switch for added water- and vibration-resistance

•Off/on/start (with return to run) works just like an automotive ignition

•Chrome billet retaining nut holds the switch firmly in place

PART # DESCRIPTION SUG. RETAILDS-272108 Universal ignition switch $15.95

UNIVERSAL IGNITION SWITCH•Handles 6 or 12V systems, has on/off/on positions and a 3/4” x 3/4” mounting stem

PART # DESCRIPTION SUG. RETAIL2106-0007 Weld-on key switch $121.95

WELD-ON KEY SWITCH ASSEMBLY•Sealed, water-tight switch•Flat key design•Includes a built-in starter relay•Welds onto 11/2” frame tube•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL3550-0088 Crusader Cross $34.953550-0089 Warrior 34.95

CUSTOM KEY COVERS•Chrome-plated billet aluminum construction•Mounts on trimmed factory key•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2106-0090 For 07-10 FLHT, FLHX, FLTR and H-D FL Trikes $62.95

CURVACEOUS CHROME IGNITION SWITCH COVER•Machined from 6061 billet aluminum, highly polished and show-chromed

•Finish your bike with a little bit of Kustom detail

•Accent cover attaches to the top of the original switch


PART # DESCRIPTION SUG. RETAIL2106-0074 For 00-11 FXST/FLST models $169.95

IGNITION SWITCH MOUNT FOR SOFTAILS•CNC-machined from T-6061 aluminum including a Klock Werks logo, then chrome-plated for a show-shine finish

•A custom detail for riders using a smooth tank or doing a custom build

•Reuses stock ignition switch and key; ignition switch mount replaces the obtrusive horn mount and requires horn relocation

•Easy to install, allows switch to use factory wiring•Necessary mounting hardware included•Made in the U.S.A.

2106-0055

2106-0056

2106-0031

2106-0060

3550-0088

3550-0089


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

642

PART # DESCRIPTION SUG. RETAILFOR 07-11 FLHT/FLTR/H-D FL TRIKE2106-0119 Chrome $129.952106-0120 Black 129.95

IGNITION SWITCH COVER•Protects ignition switch•Constructed from 6061 T-6 aluminum

•Available with chrome or black finish

PART # DESCRIPTION SUG. RETAILFOR 07-11 FLHT/FLHR/FLTR AND H-D FL TRIKE2106-0121 Chrome $99.952106-0122 Black w/ machined accents 99.95

YAFTERBURNER IGNITION SWITCH COVERS•CNC-machined from 6061 T-6 aluminum, then chrome-plated or black anodized

•Easy installation

PART # DESCRIPTION SUG. RETAILFOR 07-11 FLHT, FLHX, FLTR, H-D FL TRIKE2106-0105 Black $85.952106-0106 Chrome 85.95

IGNITION SWITCH COVERS•Covers the unsightly stock ignition switch with stand-out, custom style

•Constructed of 6061 T-6 billet aluminum•Easy to install•Available with chrome or black-anodized finish•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 07-11 FLHT/FLTR/FLHX AND H-D FL TRIKE2106-0063 Black $65.952106-0064 Chrome 65.952106-0118 Black diamond edge 89.95FOR 93-06 FLT/FLHT/FLTR2106-0115 Black 65.952106-0116 Chrome 65.952106-0117 Black diamond edge 89.95

IGNITION SWITCH KNOB COVER•CNC machined from billet aluminum•Fits over the existing switch knob and securely attaches with two-sided tape (included)


PART # DESCRIPTION SUG. RETAIL7805-0079 For 93-06 FLHT/FLTR; repl. OEM #71663-99 $49.95

CHROME IGNITION SWITCH COVER•Die-cast aluminum construction•Provides protection from the weather and hides the lock from prying eyes

•Rotates to provide easy access to the lock

PART # DESCRIPTION SUG. RETAIL7805-1075 For 94-08 FLHR; repl. OEM #71659-99 $44.95

FORK LOCK COVER•Chrome-plated machined aluminum•Cover rotates to provide access to fork lock; keeps grime out of lock

PART # DESCRIPTION SUG. RETAIL2106-0041 Ignition switch mount $5.95

IGNITION SWITCH MOUNT•Chrome-plated ignition switch mount•Features a 7/8” hole that accepts most ignition switches•Mounts almost anywhere using a 5/16” mounting hole

PART # DESCRIPTION SUG. RETAILOEM REPLACEMENT SWITCHES2101-0255 Repl. OEM 26558-84 $47.952101-0256 Repl. OEM 26557-83 47.952101-0257 Repl. OEM 26566-91 47.95CUSTOM SWITCHES2101-0258 3” HG switch 43.952101-0259 4” HG switch 43.952101-0260 5” HG switch 43.952101-0261 6” HG switch 43.95

VACUUM-OPERATED ELECTRICAL SWITCHES (VOES)•Direct OEM replacement or custom application•Custom applications include mounting bracket and are available with 3”, 4”, 5” or 6” HG activation


PART # DESCRIPTION SUG. RETAILOEM REPLACEMENT SWITCHES2101-0004 Repl. OEM 26558-84 $44.952101-0005 Repl. OEM 26557-83 44.952101-0006 Repl. OEM 26566-91 44.95CUSTOM SWITCHES2101-0007 3” HG switch 40.952101-0009 4” HG switch 40.952101-0010 5” HG switch 40.952101-0011 6” HG switch 40.95

VACUUM-OPERATED ELECTRICAL SWITCHES (VOES)•Available as stock OEM replacement or custom applications with mounting bracket

•Custom VOES are available with 3”, 4”, 5” and 6” HG activation•Made in the U.S.A.; sold each

2106-0119

2106-0105

2106-0106

2101-0257 2101-0259

2101-0004

2101-0007

2106-0120

2106-0121

2106-01182106-00642106-0063

2106-0122


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

643

PART # DESCRIPTION SUG. RETAIL2106-0126 For 84-99 80” Evolution; repl. OEM #26561-84 $10.952106-0123 For 99-11 Dyna, FLHT, FLHR, FLTR,

00-11 FXST, FLST, 03-11 V-Rod models 9.95

OIL PRESSURE SWITCHES•Precision-calibrated replacement oil pressure switches feature heavy contacts, brass pressure ferrules, thermo-plastic insulators and brightly finished steel shells

•Designed and tested to ensure consistently accurate pressure thresholds


PART # DESCRIPTION SUG. RETAILDS-272160 For 84-99 80” Evolution; repl. OEM #26561-84 $9.952106-0057 For 99-11 Dyna, FLHT, FLHR, FLTR,

00-11 FXST, FLST, 03-11 V-Rod models 8.95DS-272159 For 86-11 XL; repl. OEM #26554-77 12.95

OIL PRESSURE SWITCHES•Precision-calibrated replacement oil pressure switches feature heavy contacts, brass pressure ferrules, thermo-plastic insulators and brightly finished steel shells

•Designed and tested to ensure consistently accurate pressure thresholds


PART # DESCRIPTION SUG. RETAIL0940-0998 For 07-11 FLHT/FLHR/FLTR/FLHX,

00-11 FLST/FXST, 06-11 FXD/FXDWG $69.952212-0290 For 99-06 FLHT/FLHR/FLTR/FLHX 49.95

OIL PRESSURE SENDING UNIT COVER•Sculpted cover has a chrome finish to dress up the stock oil pressure switch

•Quick, easy installation

PART # DESCRIPTION SUG. RETAILDS-244119 For 99-08 Twin Cam models

(except FLT w/ gauge) $35.95

OIL PRESSURE SWITCH COVER•Chrome-plated billet aluminum•Flat sided for lifter cover clearance•Held in place by setscrew•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-272197 For 84-99 80” Big Twins

(single-terminal sending unit) $29.95

OIL PRESSURE SENDING UNIT COVER•High-quality, chromed, die-cast cover

•Requires the sending unit to be removed for installation

•For single-terminal gauge-style sending units•Includes an upper and lower cover for complete coverage

PART # DESCRIPTION SUG. RETAILDS-272100 Stoplight switch $6.95

MECHANICAL REAR STOPLIGHT SWITCH•Waterproof mechanical stoplight switch attaches to rear brake rod or brake linkage and frame tube

•Ideal for custom applications

2106-0126

2106-0123 DS-272160 DS-272159

2212-0290

PART # DESCRIPTION SUG. RETAIL2212-0306 For 99-08 FLHTC, FLHTCU $39.952212-0307 For all 99-08 Twin Cam models

(except FLT models w/ gauge) 31.95

OIL PRESSURE SENDING UNIT COVERS•CNC-machined aluminum construction•Chrome-plated finish•FLHTC/FLHTCU cover is two-piece design•Made in the U.S.A.

2212-0306 2212-0307

NEUTRAL SWITCH HOLE PLUG•Chrome plug is designed to replace the neutral switch in all 5-speed Big Twin transmission top covers

•Includes the plastic sealing washer for all 80-97 transmissions, the O-ring for 98-99 transmissions, and chrome hole plug that fits in the socket

•Installs with a 3/16” hex key•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-190917 Plug for all 5-speed Big Twin transmission

top covers $29.95DS-173207 Repl. O-ring (10-pk.) 1.95 (ea.)

DS-190917


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

644

THE DETAIL•The coolest neutral switch hole plug ever•Solid stainless steel construction•Screws right in and looks great•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1105-0004 For 5-speed Big Twin transmissions $39.95

NEUTRAL SWITCH COVER•Chrome switch cover offers a clean, custom look•Covers the OEM switch and plug•Installs easily with included hardware•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1105-0021 For 06-11 OEM Big Twin 6-speed transmissions $39.95

NEUTRAL SWITCH COVER•Chrome cover makes the plain aluminum switch and wire connector disappear

•Available in Frog Mouth™ style

PART # DESCRIPTION SUG. RETAILDS-324808 Frog Mouth-style for 98-05 FXD or FLT $19.95

TRANSMISSION NEUTRAL SWITCHES•Zinc-plated OEM replacement switches•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2106-0134 For 01-06 FLT, 01-04 FXD, 00-06 FXST, FLST;

repl. OEM #33904-00 $11.952106-0133 For 98-00 FLT, 98-00 FXD, 98-99 FXST, FLST;

repl. OEM #33902-98 11.952106-0132 For 85 FXST, 85-86 FX, FXWG, FXB, FXBS;

repl. OEM #33901-79 12.952106-0130 For 86 FXST, 87-97 FLT, FXR, FXST, FLST, 86-98 XL;

repl. OEM #33900-59 7.95

2106-0134

2106-0133 2106-0132

2106-0130

TRANSMISSION NEUTRAL SWITCHES•Replacement for most OEM applications•Zinc plated•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-272207 For 01-06 FLT, 01-04 FXD, 00-06 FXST, FLST;

repl. OEM #33904-00 $10.95DS-272206 For 98-00 FLT, 98-00 FXD, 98-99 FXST, FLST;

repl. OEM #33902-98 10.95DS-272205 For 85 FXST, 85-86 FX, FXWG, FXB, FXBS;

repl. OEM #33901-79 11.95DS-272203 For 86 FXST, 87-97 FLT, FXR, FXST, FLST,

86-98 XL; repl. OEM #33900-59 7.95

DS-272207


RETAIL2106-0059 For 03-11 Touring, XL, 05-07 FXD, FXDWG, 04-11 FXST,

FLST, 07-11 V-Rod models; repl. OEM #72023-51D $20.95DS-272191 Spade-type switch for 84-07 FL, FLT, FLST, FX, FXST, FXR,

Dyna and 86-03 XL; repl. OEM #72023-51C 10.95

HYDRAULIC STOPLIGHT SWITCHES•Feature Bakelite insulators, heavy-duty contacts and high-conductivity brass terminals

PART # DESCRIPTION SUG. RETAIL2106-0124 For 03-11 Touring, XL, 05-07 FXD, FXDWG,

04-11 FXST, FLST, 07-11 V-Rod models; repl. OEM #72023-51D $22.95

2106-0128 Spade-type switch for 84-07 FL, FLT, FLST, FX, FXST, FXR, Dyna and 86-03 XL; repl. OEM #72023-51C 10.95

HYDRAULIC STOPLIGHT SWITCHES•Bakelite insulators, high-conductivity brass terminals and heavy-duty contacts

2106-0124 2106-0128

DS-272206 DS-272205 DS-272203

DS-272191

2106-0059

PART # DESCRIPTION SUG. RETAILFOR 96-11 MODELS0616-0128 6-piece switch cap kit $29.950616-0130 4-piece radio/cruise control switch cap kit 49.950616-0129 2-piece radio control switch cap kit 39.95

SWITCH CAP KITS•Update the black OEM switch caps without replacing the entire switch

•Quick, easy installation•Radio and cruise control switches not included in 6-piece kit; must be ordered separately

0616-0130

0616-0129

0616-0128


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

645

PART # DESCRIPTION SUG. RETAILCHROME SWITCHES0616-0053 96-11 switch kit $129.95DS-272196 84-95 switch kit 112.950616-0124 96-11 radio switch kit 98.950616-0126 96-11 radio/cruise switch kit 195.952106-0083 96-11 start and stop switches 32.95DS-272255A 84-95 start and stop switches 25.952106-0082 96-11 dimmer and horn switches 32.95DS-272257A 84-95 dimmer and horn switches 27.952106-0080 96-11 right turn signal switch 19.95DS-272256A 84-95 right turn signal switch 16.952106-0081 96-11 left turn signal switch 19.95DS-272258A 84-95 left turn signal switch 16.95BLACK SWITCHES0616-0054 96-11 switch kit 119.95DS-272195 84-95 switch kit 82.950616-0125 96-11 radio switch kit 98.950616-0127 96-11 radio/cruise switch kit 195.952106-0087 96-11 start and stop switches 29.95DS-272250A 84-95 start and stop switches 19.952106-0086 96-11 dimmer and horn switches 29.95

PART # DESCRIPTION SUG. RETAILBLACK SWITCHES (CONT)DS-272252A 84-95 dimmer and horn switches $21.952106-0084 96-11 right turn signal switch 19.95DS-272251A 84-95 right turn signal switch 12.952106-0085 96-11 left turn signal switch 19.95DS-272253A 84-95 left turn signal switch 12.95REPLACEMENT FRONT BRAKE/NEUTRAL SWITCHES2106-0088 96-11 front brake switch 16.95DS-272254A 84-95 front brake switch 7.952106-0089 07-11 handlebar neutral safety switch 16.95

HANDLEBAR SWITCHES•OEM-replacement switch kits with color-coded leads and black protective sleeves

•96-11 kits have 60” leads, 84-95 use 48” leads•Individual switches are also available separately•Meet or exceed OEM specifications•Fit U.S.A. and international models

NOTE: Switch kits for OEM radio, radio/cruise controls are not included with the standard kits and must be purchased separately.

NOTE: Switch kits and switches will not fit 2011 Softail or Rocker models.

DS-272196

DS-272195

0616-0054

PART # DESCRIPTION SUG. RETAIL0909-2116 Start button $49.95

BATTISTINIS START BUTTON•Machined from stainless steel, with a flat design

•Incorporates electrical switch and mounts flush onto a flat surface

•3/4” diameter x 1” long •Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 1” HANDLEBARSDS-290004 W/ engraving $99.95DS-290005 W/o engraving 99.95

HANDLEBAR HI/LO SWITCH•Chrome-plated billet aluminum; available with or without engraved markings

•Switch features hidden wiring that must be routed through the handlebars (drilling required)

•Made in the U.S.A. DS-290004

PART # DESCRIPTION SUG. RETAIL0616-0018 Dual-button for 1”-dia. handlebars $131.950616-0020 Single-button for 1”-dia. handlebars 115.950616-0038 Dual-button for 11/4”-dia. handlebars 131.950616-0063 Dual-button for 11/2”-dia. handlebars 131.95

SLIM LINE SWITCH HOUSINGS•Made from billet aluminum with a polished finish•Two-piece housing design for easy installation•Allows for internal or external handlebar wiring•Only 7/16” wide•Momentary push-button switches are rated for 1/2 amp•Switches can be used to send a low-amperage signal to activate a relay for higher-amperage-rated accessories


0616-0018 0616-0020 0616-0063


RETAIL3-BUTTON0616-0086 Chrome $326.950616-0087 Black anodized 326.95


RETAIL2-BUTTON0616-0088 Chrome $295.950616-0089 Black anodized 295.95

SWITCH HOUSING ASSEMBLY•Billet switch housings available in 2- or 3-button•Feature momentary pushbutton switches for turn signals, horn and start button

•Left and right complete set•Come in either chrome or black anodized•Made in the U.S.A.

0616-0086

0616-0089CONTOUR BILLET HANDLEBAR SWITCHES•3-button housing includes high-quality switches with 36” leads

•Retains blinkers, horn and high-beam switches•Work exclusively with Performance Machine Contour hand controls•Sold each•Made in the U.S.A.PART # DESCRIPTION SUG. RETAILRIGHT SIDE HOUSING0616-0096 Chrome $229.950616-0097 Black anodized 229.95LEFT SIDE HOUSING (FOR CABLE CLUTCH)0616-0098 Chrome 229.950616-0099 Black anodized 229.95LEFT SIDE HOUSING (FOR HYDRAULIC CLUTCH)0616-0100 Chrome 229.950616-0101 Black anodized 229.95

0616-0096

0616-0097

0616-0053

0616-0124

0616-0126


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

646

SWITCH HOUSINGS•Left and right side 3-button switch housings machined from billet aluminum

•Left side switches are: 2 normally open for the horn and blinker, 1 three wire for hi/lo beam

•Right side switches are: 2 normally open for starter and blinker, 1 normally closed for Kill

•Work with Jaybrake Classic, J-series, and New Image hand controls•Switches are supplied with 36” leads for ease of wiring and feature positive engagement action

•Bars can be wired internally or externally with dimpled bars•Made in the U.S.A.

ROCKER SWITCHES•Replacement rocker switch for your bagger

•Available in a chrome or black finish

PART # DESCRIPTION SUG. RETAILLEFT-SIDE0616-0135 Polished $160.950616-0136 Chrome 175.950616-0137 Black anodized 175.95

PART # DESCRIPTION SUG. RETAILRIGHT-SIDE0616-0132 Polished $160.950616-0133 Chrome 175.950616-0134 Black anodized 175.95


RETAIL2106-0095 For 08-11 FLHX/FLHXXX, black; repl. OEM #70219-08 $74.952106-0096 For 08-11 FLHX/FLHXXX, chrome; repl. OEM #70219-08 79.952106-0097 For 98-11 FLHTCU/FLHTCUTG, black;

repl. OEM #70271-98 119.952106-0098 For 98-11 FLHTCU/FLHTCUTG, chrome;

repl. OEM #70271-98 134.952106-0099 For 04-11 FLHT/C, black; repl. OEM #70278-04 74.952106-0100 For 04-11 FLHT/C, chrome; repl. OEM #70278-04 79.952106-0101 For 04-11 FLTR, black; repl. OEM #71625-04 69.952106-0102 For 04-11 FLTR, chrome; OEM #71625-04 79.952106-0103 For 98-03 FLTR, black; repl. OEM #71655-98 36.952106-0104 For 98-03 FLTR, chrome; OEM #71655-98 44.95

ACCESSORY SWITCH BLOCK•Long-lasting cast construction

•Two-switch function with LED indicator•For use on 1” handlebars

ROCKER SWITCH•Lighted switch fits many popular switch consoles

PART # DESCRIPTION SUG. RETAIL0616-0061 Accessory switch block $115.95

PART # DESCRIPTION SUG. RETAILDS-272147 Lighted rocker switch $4.95

TOGGLE SWITCH•Waterproof two-position switch•Use with any custom application•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-272177 Toggle switch $18.95

DOUBLE ROCKER SWITCH•Switch incorporates two independent rockers and fits in place of the OEM switch

•Each side of the switch operates independently

•Each side of the switch can handle up to a 15A load

•Rocker switch is black to match the other OEM switchgear•Sold each

ELECTRICAL BOX•Made from billet aluminum, then given a chrome-plated, polished finish for a show-quality look

•Relocates the ignition switch to a side mount and can be used to mount other electrical components

•Works great for custom applications•Measures 71/4” L x 2” W x 2” D•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2106-0091 For 96-11 FLHT/FLTR/FLHX and H-D FL Trike $24.95

PART # DESCRIPTION SUG. RETAIL2130-0021 Electrical box $99.95

MINI PUSH-BUTTON SWITCH•12mm round stainless steel push-button switch includes a special radius-shaped spacer to allow mounting in handlebars

•Great for turn signal, starter, horn, stop or hi-low operations (must be used with a relay)

•Includes two 20” wires; installing requires 9/32” drill and 5/16” UNF tapPART # DESCRIPTION SUG. RETAIL2106-0011 Mini push-button switch $14.95

0616-0137

0616-01360616-0135

0616-0133

2106-0099 2106-0100


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

647

PART # DESCRIPTION SUG. RETAIL2120-0256 For all 96-06 H-D models (except Dressers) $195.952120-0257 For all 07-11 H-D models (except Dressers, 11 Softails) 195.952120-0258 For 96-06 FLHR models 195.952120-0259 For 07-08 FLHR models 195.95

HAND CONTROL SWITCH HARNESS CONVERTER•Provides two latching relay functions for Hawg Halters momentary push button switches; PART #s 0616-0086 through 0616-0089

•A direct plug in to the stock HD harness

2120-0256


RETAILFOR 08-11 TOURING MODELS2120-0251 8” extension $38.952120-0252 12” extension 40.95


RETAILFOR 08-11 TOURING MODELS (CONT)2120-0253 15” extension $43.95

ELECTRONIC THROTTLE CONTROL EXTENSIONS•Allow easy changes in handlebar height on models with electronic throttle control

•Made with OEM-type connectors•Extensions can be snapped together to create longer lengths


2120-0253

2120-0252

2120-0251


RETAILFOR 96-11 MODELS (EXCEPT 11 SOFTAILS)2120-0344 +4” $27.952120-0345 +8” 29.95


RETAILFOR 96-11 MODELS (EXCEPT 11 SOFTAILS) (CONT)2120-0346 +12” $32.952120-0347 +15” 34.95

FRONT TURN SIGNAL EXTENSION HARNESS KITS•A must when installing taller handlebars•Intended for front turn signals mounted on handlebar switch housings on all 96-11 models (except 11 Softail)

•De-pin factory harness connector and install•No crimping necessary•Made in the U.S.A.

2120-0344

PART # DESCRIPTION SUG. RETAILFOR 11 SOFTAIL2120-0367 +4” $32.952120-0368 +8” 34.952120-0369 +12” 35.952120-0370 +15” 37.95FOR 07-11 ALL (EXCEPT FLHT, 11 SOFTAIL) (14 WIRE)2120-0229 +4” 31.952120-0230 +8” 32.952120-0231 +12” 33.952120-0232 +15” 39.95FOR 96-06 ALL (EXCEPT FLHT, FLT) (12 WIRE)2120-0233 +4” 31.952120-0234 +8” 32.952120-0235 +12” 33.952120-0236 +15” 39.95

READY-TO-INSTALL HANDLEBAR EXTENSION HARNESSES•All the items needed to successfully extend the wiring to a set of OEM H-D handlebar switches•Harnesses include both male and female Molex terminals crimped on each end•Kits for all except FLHT and FLT models include wire heat shrink, a length of 3/8” heat shrink and color-matching wire•Kits for FLHT and FLT models include wire heat shrink, a length of 1/2” heat shrink and color-matching wire•Made in the U.S.A. 2120-0221

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT, FLHX, FLHR, FLTR AND H-D FL TRIKES2120-0244 +4” $37.952120-0245 +8” 39.952120-0246 +12” 41.95

PART # DESCRIPTION SUG. RETAILFOR 08-11 FLHT, FLHX, FLHR, FLTR AND H-D FL TRIKES (CONT)2120-0247 +15” $44.952120-0343 +18” 47.95

THROTTLE BY WIRE EXTENSION HARNESS KIT•Designed and tested to extend your wiring without causing any harm or interference to the motorcycle’s computer when installing taller handlebars

•Color coded to connect to the existing 6-Position Molex connector; simply plug and play (except models with hardwired harnesses)


2120-0343

2120-0244

PART # DESCRIPTION SUG. RETAIL2120-0022 For 96-06 Big Twin and XL models $25.95

EXTENDED HANDLEBAR WIRING HARNESS•Extended harness simplifies handlebar swaps that require longer wiring•Color coded to match OEM wiring; measures 36” in length•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-305201 For 84-95 H-D, 48” $17.95

EXTENDED HANDLEBAR WIRING HARNESS•Replaces stock harness when converting to taller handlebars•48” long wires and 38” long black covering allow the installation of almost any height bars; it comes with connectors and tie wraps

PART # DESCRIPTION SUG. RETAILFOR 07-11 FLHT, FLHX, FLHR, FLTR AND H-D FL TRIKES (26 WIRE)2120-02211 +4” $48.952120-02221 +8” 51.952120-02231 +12” 53.952120-02241 +15” 55.95FOR 96-06 FLHT, FLT (24 WIRE)2120-0225 +4” 44.952120-0226 +8” 46.952120-0227 +12” 48.952120-0228 +15” 50.951 08-11 applications will require TBW extension kits

PART #s 2120-0244 through 2120-0247, 2120-0343.


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

648

PART # DESCRIPTION SUG. RETAILFOR 07-11 WITH H-D RADIO (8 WIRE)2120-0125 4” extension kit $35.952120-0126 8” extension kit 40.952120-0127 12” extension kit 44.952120-0128 15” extension kit 46.952120-0168 18” extension kit 56.952120-0169 20” extension kit 62.952120-0170 24” extension kit 75.95FOR 96-06 WITH H-D RADIO (8 WIRE)2120-0087 4” extension kit 34.952120-0088 8” extension kit 38.952120-0089 12” extension kit 43.952120-0090 15” extension kit 45.952120-0162 18” extension kit 56.95

PART # DESCRIPTION SUG. RETAILFOR 96-06 WITH H-D RADIO (8 WIRE) (CONT)2120-0163 20” extension kit $62.952120-0164 24” extension kit 75.95FOR 07-11 WITH H-D CB RADIO (12 WIRE)2120-0129 4” extension kit 46.952120-0130 8” extension kit 48.952120-0131 12” extension kit 55.952120-0132 15” extension kit 57.952120-0171 18” extension kit 70.952120-0172 20” extension kit 78.952120-0173 24” extension kit 93.95FOR 96-06 WITH H-D CB RADIO (12 WIRE)2120-0091 4” extension kit 45.952120-0092 8” extension kit 49.95

PART # DESCRIPTION SUG. RETAILFOR 96-06 WITH H-D CB RADIO (12 WIRE) (CONT)2120-0093 12” extension kit $54.952120-0094 15” extension kit 56.952120-0165 18” extension kit 70.952120-0166 20” extension kit 78.952120-0167 24” extension kit 93.95FOR 08-11 H-D WITH ELECTRIC THROTTLE2120-0174 4” extension kit 33.952120-0175 8” extension kit 35.952120-0176 12” extension kit 38.952120-0177 15” extension kit 40.952120-0178 18” extension kit 44.952120-0179 20” extension kit 51.952120-0180 24” extension kit 55.95

PART # DESCRIPTION SUG. RETAILFOR 07-11 H-D WITHOUT CRUISE CONTROL (14 WIRE) EXCEPT 11 FXST/FLST/FXCW MODELS2120-0260 4” extension kit $48.952120-0261 8” extension kit 52.952120-0262 12” extension kit 57.952120-0263 15” extension kit 61.952120-0264 18” extension kit 71.952120-0265 20” extension kit 75.952120-0266 24” extension kit 81.95FOR 96-06 H-D WITHOUT CRUISE CONTROL (12 WIRE)2120-0027 4” extension kit 37.952120-0028 8” extension kit 42.95

PART # DESCRIPTION SUG. RETAILFOR 96-06 H-D WITHOUT CRUISE CONTROL (12 WIRE) (CONT)2120-0029 12” extension kit $46.952120-0030 15” extension kit 48.952120-0150 18” extension kit 60.952120-0151 20” extension kit 64.952120-0152 24” extension kit 71.95FOR 07-11 H-D WITH CRUISE CONTROL (17 WIRE)2120-0267 4” extension kit 65.952120-0268 8” extension kit 67.952120-0269 12” extension kit 71.952120-0270 15” extension kit 75.952120-0271 18” extension kit 79.95

PART # DESCRIPTION SUG. RETAILFOR 07-11 H-D WITH CRUISE CONTROL (17 WIRE) (CONT)2120-0272 20” extension kit $83.952120-0273 24” extension kit 89.95FOR 96-06 H-D WITH CRUISE CONTROL (15 WIRE)2120-0031 4” extension kit 49.952120-0032 8” extension kit 54.952120-0033 12” extension kit 57.952120-0034 15” extension kit 59.952120-0153 18” extension kit 75.952120-0154 20” extension kit 82.952120-0155 24” extension kit 90.95

HANDLEBAR WIRE HARNESS EXTENSION KITS•No cutting, soldering or hassle•Available in various lengths for bikes with or without cruise control, with radio or with CB radio and with electronic throttle

•Kits include color-coded wire, OEM pin connectors, 1/8” and 3/8” shrink tubing, complete instructions, illustration and wire block diagram

•Can be internally wired through handlebars•Made in the U.S.A.

NOTE: Standard kits listed with and without cruise control contain extensions for both sides of handlebars; additional kits must be ordered for H-D radio, H-D CB and electronic throttle and purchased separately in addition to the standard kits.

PART # DESCRIPTION SUG. RETAILBRAIDED STAINLESS STEEL HARNESSES2120-0004 Turn signal, 24” (pr.) $57.952120-0005 Turn signal, 36” (pr.) 68.952120-0006 Headlight, 18” (ea.) 36.952120-0007 Tachometer, 48” (ea.) 40.952120-0010 Rear brake light switch, 18” (ea.) 40.95

PART # DESCRIPTION SUG. RETAILDO-IT-YOURSELF KITS2120-0002 External handlebar, 36” (pr.) $53.952120-0003 Internal handlebar, 18” (pr.) 40.952120-00081 Oil sending unit switch, 18” (ea.) 26.952120-0009 Regulator, 48” (ea.) 40.952120-0011 Ignition, 48” (ea.) 40.951 For 80” Evolution motors only.

BRAIDED WIRE HARNESSES AND DO-IT-YOURSELF KITS•Stainless steel offers a unique custom look compared to plain black harnesses•Stainless steel harnesses feature wiring for custom applications•Do-it-yourself kits are used to cover existing wires•Both have a clear PVC outer covering to protect your bike and preserve the finish of the braided cover•25’ rolls of stainless steel or copper covers without clear PVC covering are also available for various OEM custom applications; see HARDWARE, CHEMICALS & TOOLS section

•25’ rolls of clear shrink tubing in five sizes sold separately; see HARDWARE, CHEMICALS & TOOLS section•Made in the U.S.A.

STANDARD KITS

ADDITIONAL KITS

2120-0004 2120-0005

2120-0006

2120-00072120-0010

2120-0002 2120-0003

2120-0008

2120-0009

2120-0011

2120-0032


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

649

PART # DESCRIPTION SUG. RETAIL2120-0356 For 02-05 Ironhorse $199.95

HOT BOX WIRING HARNESS FOR AMERICAN IRONHORSE•Namz “Plug-n-Play” technology for American Ironhorse models

•Easy installation after removal of OEM Smart Flash and PCM modules

•Includes replacement Hot Box module, mating Deutsch Plug ready for installation, full size starter relay, ATO fuses and holders

NOTE: Professional installation is recommended but not required.

PART # DESCRIPTION SUG. RETAILFOR 96-10 H-D MODELS (EXCEPT XL)2120-0254 Rear lighting harness $179.952120-0255 Rear lighting subharness 179.95

HOT BOX WIRING HARNESSESREAR LIGHTING HARNESS•Consists of a replacement rear lighting harness with Namz “Plug-n-Play” technology

•Features two separate detachable pigtail harnesses for each saddlebag with a ground or single output wire with RUN, BRAKE and TURN SIGNAL functions

•Perfect for adding custom lighting to saddlebags•Works just like the factory model except it has two extra wires (right and left turn signal output) to allow for a more custom lighting design

•Best suited for custom rear fenders or more extreme or custom built Baggers

REAR LIGHTING SUBHARNESS•Less aggressive but still features Namz “Plug-n-Play” technology•Designed for the rider that wants to keep it simple; just disconnect the rear lighting harness and plug unit in between

•Subharness does not replace the rear lighting harness•Best suited for near stock Baggers•Features two separate detachable pigtail harnesses for each saddlebag with a ground and single output wire with RUN, BRAKE and TURN SIGNAL functions

ELECTRONIC HARNESS CONTROLLER•Compact design makes it easy to hide on a custom motorcycle

•Performs all fuse, relay and signal canceling functions in one simple package

•Allows a dual-filament bulb to be used in three ways: tail, brake and turn signal (excluding the need for a center brake light)

•Weather-resistant connections for trouble-free use in extreme environments

•Trim-to-fit harness allows installation on most custom bikes

MICRO HARNESS CONTROLLERS•Billet 6061 T-6 aluminum housing and 7’ trim-to-fit wiring design is compact and easily hidden on custom motorcycles

•Performs all fuse, relay (includes starter relay) and signal-canceling functions in one simple package

•Provides multiple flasher combinations (signal canceling, hazard lights, running lights and turn signal) from one dual-filament bulb

•Utilizes relays to distribute all power functions, thus eliminating the need to run large wires to all the switches

•Can be used with micro switches•PART #2120-0086 includes brake light module for separate brake light output•Optional push-button momentary switch converter available separately (PART #2120-0085)•Weather-resistant connections for trouble-free use in extreme environments•Designed for U.S. and European applications•Weighs 2.3 lb.

PUSH-BUTTON CONVERTER•Convenient way to wire up push-button hand control switches

•Takes momentary signal from a push-button hand control switch and converts it to a standard “latching” signal

•Design is fully circuit-protected and has no relays to wear out•Compact size, measures just 2” x 0.6” x 0.5”•Simple six-wire hookup, wiring diagram included•Designed for use with 12V electrical systems such as Thunder Heart’s Micro Harness Controller

2120-0254

2120-0255

2120-0023

PART # DESCRIPTION SUG. RETAIL2120-0023 For choppers and saddle tank bikes w/o separate brake light $310.952120-0086 For choppers and saddle tank bikes w/ separate brake light 345.95

2120-0086


RETAIL2120-0024 “D” model electronic controller $310.95

CENTER BRAKE LIGHT MODULE•Allows installation of a center brake light on custom bikes when used with Thunder Heart’s Micro Harness Controller PART # 2120-0023

•Compatible with LED and incandescent bulbs•Solid-state construction, fully circuit-protected and has no relays to wear out

•Compact size of 2” x 0.6” x 0.5” lets you mount it just about anywhere•12V, 3A max current capacity•Simple four-wire hookup; wiring diagram included

PART # DESCRIPTION SUG. RETAIL2120-0084 Center brake light module $40.95

PART # DESCRIPTION SUG. RETAIL2120-0085 Push-button converter $40.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

EFI WIRING HARNESS•Designed specifically for fuel-injected S&S engines including S&S X-Wedge™, V-Series and T-Series in motorcycle frames with 2” or less of backbone stretch (such as the Rolling Thunder 200X frame for X-Wedge)

•Plugs directly into Delphi®-style S&S VFI modules and stock Delphi modules used in late-model H-D motorcycles

•Also compatible with most stock and aftermarket components for Softail models including tip-over sensor and late-model oxygen sensors

•Includes provisions for a knock sensor which is utilized in the knock sensing ignition control of the newest S&S VFI modules

•Set includes connectors for speedometer, headlight, fuel gauge, left and right handlebar controls, indication lights and front turn signals

•Optional matching connector set also available (sold separately) for the S&S EFI wiring harness; set contains the correct connectors to allow custom builders to make tight water-proof connections from electrical components to the S&S harness set

NOTE: S&S V-Series and T-Series fuel-injected engines also require the use of two Keihin-to-Bosch style adapters (X-Wedge engines do not require the use of this adapter).

650

PART # DESCRIPTION SUG. RETAIL

2120-0018 Custom wire harness $179.95

CUSTOM CHOPPER WIRE HARNESS•Makes wiring your custom motorcycle a snap

•Includes just the essentials: keyed on-off start switch, 3-way toggle switch, in-line fuses (15 and 30 amp), wire ends, shrink tube and wiring diagram

•For custom applications only•Made in the U.S.A.


DS-272333 3/8” i.d.; repl. OEM #56073-83, 4-pk. $4.95DS-272334 1/2” i.d.; repl. OEM #70345-84, 4-pk. 4.95DS-272350 3/8” i.d.; repl. OEM #56073-83, 10-pk. 1.55 (ea.)DS-272351 1/2” i.d.; repl. OEM #70345-84, 10-pk. 1.55 (ea.)

HANDLEBAR WIRING CLIPS•Chrome-plated nylon clips•Very durable and resist cracking•Sold in 4-packs or 10-packs


FEMALE CONNECTORS

2120-0314 Black 3-pin $2.95

2120-0315 Green 3-pin 5.95

2120-0338 Gray 3-pin 3.95

2120-0316 Black 4-pin 2.95

2120-0317 Gray 4-pin 2.95

2120-0318 Black 6-pin 5.95

2120-0319 Black 8-pin 3.95

2120-0320 Black 12-pin 3.95

2120-0333 Gray 12-pin 5.95

2120-0321 Black 16-pin 5.95


FEMALE CONNECTORS (CONT)

2120-0334 Gray 16-pin $5.95

2120-0322 Black 20-pin 6.95

MALE CONNECTORS

2120-0323 Black 3-pin 1.95

2120-0324 Brown 3-pin 1.95

2120-0325 Green 3-pin 1.95

2120-0335 Gray 3-pin 2.95

2120-0326 Black 4-pin 1.95

2120-0337 Gray 4-pin 2.95

2120-0331 Black 6-pin 4.95

MOLEX MX 150 CONNECTOR COMPONENTS•Male and female connectors and terminals•Simple to use•Watertight construction in a small compact size•Hole plugs are used when a wire/terminal is not present in order to keep connector watertight•”U-barrel” stamped terminals also availableFOR 07-11 MODELS

2120-03152120-0317

2120-03182120-0319

2120-0322

DS-272334

2120-0324

2120-03262120-0328

2120-03312120-0332

2120-03332120-0334

2120-03362120-0339

2120-0340 3807-0040


2120-0194 Mate-N-Lock builders kit $338.95 PART # DESCRIPTION SUG. RETAILREPLACEMENT CAP CONNECTORS2120-0195 2-position plug (5-pk.) $1.95 (ea.)2120-0196 3-position plug (5-pk.) 2.95 (ea.)2120-0197 4-position plug (5-pk.) 2.95 (ea.)2120-0198 6-position plug (5-pk.) 2.95 (ea.)2120-0199 9-position plug (5-pk.) 3.95 (ea.)2120-0200 12-position plug (5-pk.) 4.95 (ea.)2120-0350 15-position plug (5-pk.) 9.95 (ea.)REPLACEMENT PLUG CONNECTORS2120-0201 2-position plug (5-pk.) 1.95 (ea.)2120-0202 3-position plug (5-pk.) 2.95 (ea.)

PART # DESCRIPTION SUG. RETAILREPLACEMENT PLUG CONNECTORS (CONT)2120-0203 4-position plug (5-pk.) $3.95 (ea.)2120-0204 6-position plug (5-pk.) 3.95 (ea.)2120-0205 9-position plug (5-pk.) 5.95 (ea.)2120-0206 12-position plug (5-pk.) 7.95 (ea.)2120-0351 15-position plug (5-pk.) 9.95 (ea.)CRIMP TERMINAL2120-0207 Stamped crimp

“U-barrel” pins (plugs) (100-pk.) 14.95

PART # DESCRIPTION SUG. RETAILCRIMP TERMINAL (CONT)2120-0208 Stamped crimp “U-barrel”

sockets (caps) (100-pk.) $14.95TERMINAL REMOVAL TOOLS3807-0062 Rigid design terminal

removal tool 37.953807-0063 Slide design terminal

removal tool 87.95

MATE-N-LOCK CAP AND PLUG CONNECTORS•AMP Mate-n-Lock 15-position male and female connectors with wire and interface seals

•Mate-N-Lock connectors feature a watertight male/female design

•Used on all Thunderheart control modules and factory built motorcycles from Big Dog, American Ironhorse, Indian and more

•Come packaged with the necessary wire and interface seal •Made in the U.S.A.

2120-01942120-0195

2120-0201

3807-00623807-0063

PART # DESCRIPTION SUG. RETAILFOR S&S X-WEDGE, V-SERIES, T-SERIES ENGINES AND CUSTOM APPLICATIONS2120-0352 EFI wiring harness $759.952120-0353 Connector set w/ terminals 92.952120-0354 Keihin-to-Bosch style adapter (two required) 10.95

2120-0352


MALE CONNECTORS (CONT)

2120-0327 Black 8-pin $3.95

2120-0328 Gray 8-pin 4.95

2120-0332 Gray 8-pin 5.95

2120-0329 Gray 12-pin 3.95

2120-0336 Black 12-pin 3.95

2120-0330 Black 16-pin 4.95

2120-0339 Gray 16-pin 4.95

TERMINALS

2120-0340 Hole plugs (10-pk.) 1.95 (ea.)


TERMINALS (CONT)

2120-0341 Stamped “U-barrel” female terminals (100-pk.) $.25 (ea.)

2120-0342 Stamped “U-barrel” male terminals (100-pk.) .25 (ea.)

TERMINAL REMOVAL TOOL

3807-0040 For use with Molex MX-150 style terminals 49.95


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

651

PART # DESCRIPTION SUG. RETAIL2120-0181 Multi-Lock builders kit $213.95

PART # DESCRIPTION SUG. RETAILREPLACEMENT CAP CONNECTORS2120-0182 2-position plug (5-pk.) $1.95 (ea.)2120-0183 3-position plug (5-pk.) 1.95 (ea.)2120-0184 4-position plug (5-pk.) 1.95 (ea.)2120-0185 6-position plug (5-pk.) 1.95 (ea.)2120-0186 8-position plug (5-pk.) 5.95 (ea.)REPLACEMENT PLUG CONNECTORS2120-0187 2-position plug (5-pk.) 1.95 (ea.)2120-0188 3-position plug (5-pk.) 2.95 (ea.)

PART # DESCRIPTION SUG. RETAILREPLACEMENT PLUG CONNECTORS (CONT)2120-0189 4-position plug (5-pk.) $1.95 (ea.)2120-0190 6-position plug (5-pk.) 2.95 (ea.)2120-0191 8-position plug (5-pk.) 2.95 (ea.)CRIMP TERMINALS2120-0192 Stamped “U-barrel” pins (plugs) (100-pk.) 23.952120-0193 Stamped “U-barrel” sockets (caps) (100-pk.) 23.95

MULTI-LOCK BUILDERS KIT•AMP Multi-Lock connectors are the direct Harley-Davidson replacements that have been used since 1996

•These non-waterproof connectors are used on every factory model•Includes all necessary wire seals, wedgelocks and crimp terminals•Includes eight 8-position plugs, eight 6-position plugs, eight 4-position plugs, eight 3-position plugs, eight 2-position plugs and 100 terminals for plugs and caps

•Connectors also available in packs of five

•Crimp terminals are sold separately•Made in the U.S.A.

2120-0181

2120-0182

2120-0187

PART # DESCRIPTION SUG. RETAIL2120-0209 Delphi/AMP builders kit $300.953807-0029 Delphi weather-pack terminal removal tool 29.95

PART # DESCRIPTION SUG. RETAILREPLACEMENT AMP CONNECTORS2120-0210 For 05-11 models, connects active intake sensor,

front O2 (oxygen) sensor and rear O2 sensor; repl. OEM #72007-05 (5-pk.) $3.95 (ea.)

2120-0211 For 07-11 models, connects the active intake sensor; repl. OEM #72012-07 (5-pk.) 8.95 (ea.)

REPLACEMENT DELPHI CONNECTORS2120-0212 For 06-11 models, connects ignition coil,

idle speed sensor and fuel pump; repl. OEM #72066-06 (5-pk.) 5.95 (ea.)

2120-0213 For 06-11 models, connects intake air temp sensor; repl. OEM #72062-06 (5-pk.) 6.95 (ea.)

PART # DESCRIPTION SUG. RETAILREPLACEMENT DELPHI CONNECTORS (CONT)2120-0214 For 06-11 models, connects front fuel injector

and rear fuel injector; repl. OEM #72098-06 (5-pk.) $4.95 (ea.)2120-0215 For 06-11 models, connects speedometer sensor

and siren; repl. OEM #72064-06 (5-pk.) 5.95 (ea.)2120-0216 For 06-11 models, connects throttle position

sensor (TPS); repl. OEM #72065-06 (5-pk.) 7.95 (ea.)2120-0217 For 98-11 models, connects map sensor;

repl. OEM #72230-98 (5-pk.) 8.95 (ea.)2120-0218 For 95-05 models, connects front fuel injector

and rear fuel injector; repl. OEM #72244-95 (5-pk.) 6.95 (ea.)

DELPHI/AMP CONNECTOR BUILDERS KIT•Kit includes four each of the AMP and Delphi connectors•Connectors also available in packs of five•Made in the U.S.A.

2120-0209

3807-0029

2120-0210

2120-02112120-0212

2120-02132120-0214

2120-0215 2120-0216 2120-02172120-0218


RETAILMALE CONNECTORS2120-0357 2-wire $2.952120-0358 3-wire 2.952120-0359 4-wire 2.952120-0360 8-wire 3.95


RETAILFEMALE CONNECTORS2120-0361 2-wire $2.952120-0362 3-wire 2.952120-0363 4-wire 2.952120-0364 8-wire 3.95


RETAILCRIMP TERMINALS2120-0365 Stampled 8-wire male

connector terminal (100-pk.) $14.95

2120-0366 Stamped 8-wire female connector terminal (100-pk.) 14.95

JST MINI CONNECTORS•Small and watertight connector system

•Designed for 22-gauge wire•Includes wire seals; crimping terminal tools available separately

NOTE: 22-gauge wire is rated for a maximum of 5-Amps.

2120-0365 2120-03662120-03642120-03622120-03592120-0357


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

652

PART # DESCRIPTION SUG. RETAILCONNECTORS2120-0037 Pins, open-style (100-pk.) $.55 (ea.)2120-0038 Sockets, open-style (100-pk.) .55 (ea.)2120-0071 Pins, closed-style (100-pk.) .95 (ea.)2120-0072 Sockets, closed-style (100-pk.) .95 (ea.)3807-0017 Crimp tool for PART #2120-0071, 2120-0072 416.95 (ea.)3807-0025 Crimp tool for PART #2120-0037, 2120-0038 361.95 (ea.)RECEPTACLES, EACH2120-0039 Gray 2-pin 2.952120-0040 Black 2-pin 2.952120-0041 Gray 3-pin 3.952120-0042 Black 3-pin 3.952120-0043 Gray 4-pin 4.952120-0044 Black 4-pin 4.952120-0045 Gray 6-pin 6.952120-0046 Black 6-pin 6.952120-0047 Gray 8-pin 10.952120-0048 Black 8-pin 10.952120-0049 Gray 12-pin 13.952120-0050 Black 12-pin 13.95

PART # DESCRIPTION SUG. RETAILPLUGS, EACH2120-0051 Gray 2-socket $3.952120-0052 Black 2-socket 3.952120-0053 Gray 3-socket 5.952120-0054 Black 3-socket 5.952120-0055 Gray 4-socket 5.952120-0056 Black 4-socket 5.952120-0057 Gray 6-socket 7.952120-0058 Black 6-socket 7.952120-0059 Gray 8-socket 10.952120-0060 Black 8-socket 10.952120-0061 Gray 12-socket 15.952120-0062 Black 12-socket 15.95HOLE PLUGS2120-0308 For all Deutsch DT series plugs and

receptacles (10-pk.) 5.95

DEUTSCH SEALED CONNECTOR COMPONENTS•Refill your Deutsch Builder Kits with these connector components•Each connector features a silicon rubber seal to reduce corrosion and moisture•The same connectors, receptacles and plugs used on factory wiring harnesses•Available with black or gray housings•Pins and sockets feature closed or open crimp-style ends•Can also be used for replacement in OEM connectors•Closed-style pins and sockets require Deutsch crimper tool, PART #3807-0017; sold separately•Receptacles and plugs come complete with required locks; sold each•Made in the U.S.A.

3807-0017

3807-0025

2120-0072

2120-0071

2120-0050

2120-00492120-0048

2120-0047

2120-0041

2120-0042

2120-0045

2120-0046

2120-0040

2120-0308

2120-0043

2120-0044

2120-0039

2120-00382120-0037

PART # DESCRIPTION SUG. RETAIL2120-0075 Black $491.952120-0076 Gray 491.95

DEUTSCH BUILDER KITS•Builder kits neatly organize Deutsch pins and plugs in one complete package

•Kits include a storage bin, 100 open-style pins, 100 open-style stamp sockets and four each (unless noted) of the following receptacles and plug styles: 2-pin; 3-pin; 4-pin; 6-pin (6 in each kit); 8-pin; 12-pin

•Available with black or gray plugs and receptacles

•Replacement components are available when bins need refilling


2120-0075 2120-0076

2120-0051 2120-0052

2120-0053

2120-00542120-0055

2120-0056

2120-0057

2120-00612120-0060

2120-0062

2120-0059

2120-0058


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

653

PART # DESCRIPTION SUG. RETAILPLUG KITS2120-0310 Includes 3-position plug, three stamped

crimp terminals and wedge lock $4.952120-0312 Includes 12-position plug, 12 stamped

crimp terminals and wedge lock 22.95

PART # DESCRIPTION SUG. RETAILRECEPTACLE KIT2120-0311 Includes 3-position receptacle, three

stamped crimp terminals and wedge lock $6.95HOLE PLUGS2120-0309 For all Deutsch DTM series plugs

and receptacles (10-pk.) 5.95

DEUTSCH PLUG AND RECEPTACLE KITS•PART #2120-0310 is used on the harness side of fuel-injected models at the fuel pump

•PART #2120-0311 is used on the fuel pump side of fuel-injected models at the fuel pump

•PART #2120-0312 is used on the harness side of Big Twin models at the speedometer

•Hole plugs are used when a wire/terminal is not present in order to keep connector watertight

PART # DESCRIPTION SUG. RETAIL2120-0035 Male pins $3.95 (10-pk.)2120-0036 Female sockets 5.95 (10-pk.)

CONNECTOR PINS/SOCKETS•Deutsch open-style connector pins and sockets for late-model wire harnesses

•For repairs or custom-built wire harness using Harley connector blocks

•Choice of male pins (OEM #72190-94) or female sockets (OEM #72191-94)

•Sold in packs of 10•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-305170 Black $7.95DS-305172 Brown 7.95DS-305174 Blue 7.95DS-305176 Green 7.95DS-305178 Purple 7.95DS-305180 Pink 7.95DS-305182 Red 7.95DS-305184 White 7.95DS-305186 Yellow 7.95DS-305188 Orange 7.95

16-GAUGE PRIMARY WIRE•35’ rolls available in 10 colors•Wire is stranded copper and has thermoplastic housing•Made in the U.S.A.


RETAILDS-272165 8-lug block $16.95DS-272166 6-lug block 12.95DS-272167 4-lug block 9.95

PART # DESCRIPTION SUG. RETAILSTUD/DUAL-SPADE STYLE2130-0065 30A $4.952130-0066 40A 4.95TWO-STUD STYLE2130-0062 50A; repl. OEM #74600-94 9.952130-0061 40A; repl. OEM #74600-97A 5.95

PART # DESCRIPTION SUG. RETAILTWO-STUD STYLE (CONT)2130-0063 30A; repl. OEM #74599-77B $5.952130-0064 15A; repl. OEM #74589-73 7.95DUAL-SPADE STYLE2130-0067 15A; repl. OEM #74587-94 9.95

CIRCUIT BREAKERS•15, 30, 40 or 50A versions available•Sold each•Made in the U.S.A.

2120-0035

2120-0036

JUNCTION BLOCKS•Bakelite blocks for custom wiring jobs – compact and easy to hide

•Available in 4-, 6- and 8-lug sizes•Come with lug screws; mounting hardware not included


FOR MOST 84-99 BIG TWIN AND XL MODELS


RETAILSTUD/DUAL-SPADE STYLEDS-324001 30A $4.95DS-324002 40A 4.95


RETAILTWO-STUD STYLEDS-325646 50A; repl. OEM #74600-94 $9.950913-1001 40A; repl. OEM #74600-97A 4.95DS-325647 30A; repl. OEM #74599-77B 5.95


RETAILTWO-STUD STYLE (CONT)DS-325648 15A; repl. OEM#74589-73 $6.95DUAL-SPADE STYLEDS-325649 15A; repl. OEM #74587-94 8.95

CIRCUIT BREAKERS•Available in 15, 30, 40 or 50A•Sold individually•Made in the U.S.A.

FOR MOST 84-99 BIG TWIN AND XL MODELS

2120-0310

2120-0312 2120-0311

2130-0065 2130-0062 2130-0063 2130-0067

DS-272165DS-272166

DS-272167

DS-324002DS-325646

DS-325649


WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE


GASKETS& SEALS

ELECTRICAL

LIGHTING


CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES


FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

SECTION 10

654

PART # DESCRIPTION SUG. RETAILTETHER KILL SWITCHESDS-305501 Panel mount $70.95DS-305502 For 7/8” handlebars 108.95DS-305503 For 1” handlebars 108.952106-0043 For 11/4” handlebars 97.95TETHER CORDS2106-0030 Optional tether cord w/ wristband 19.95DS-305504 Repl. tether cord w/ clip 14.95

TETHER KILL SWITCH•Tether kill switch designed to stop a runaway motorcycle if the rider is separated from it

•Available either in panel mount or handlebar mount•Complete with a clipped tether cord that extends to 50”•Panel mount fits in a 5/8” (1.6mm) hole in a flat panel•Handlebar mount clamps around handlebar, comes in 7/8”, 1” or 11/4” •Billet aluminum body, water-resistant switch, stainless internal components with high-temperature Teflon® 24” silver-coated copper wire for dependable operation

•For normally closed battery-type ignition•Optional wristband tether is easy to attach, fits over bulky gloves and offers hook-and-loop adjustment

•Made in the U.S.A.; patented

PART # DESCRIPTION SUG. RETAILDS-272321 Lighter kit $14.95

UNIVERSAL MOISTURE-RESISTANT CIGARETTE LIGHTER•Features a rubber seal/cap to keep moisture out•Kit includes a lighter, fuse holder, 10-amp fuse and wire

PART # DESCRIPTION SUG. RETAIL2130-0053 12V plug/adapter $19.95

12V PLUG/ADAPTOR•Adapts accessory outlet or cigarette lighter socket to femaleRCA plug for power

PART # DESCRIPTION SUG. RETAIL86-44410 Handlebar mount cigarette lighter $18.95

HANDLEBAR-MOUNT CIGARETTE LIGHTER•Mounts to 7/8” and 1” bars•Includes fuse holder, hot and ground leads

PART # DESCRIPTION SUG. RETAIL86-44420 Cigarette lighter/map light $11.95

CIGARETTE LIGHTER/MAP LIGHT•Dual-purpose unit has clip for hanging on bars

•Button-activated element for lighting cigarettes

•Button-activated map light•1’ coiled cord plugs into cigarette lighter receptacle

PART # DESCRIPTION SUG. RETAIL2130-0001 For 97-10 FLT, FLHT Tour-Paks $29.95

“PAKPOWER” TOUR-PAK POWER PLUG•Powers accessories while you ride•Allows recharging while inside the Tour-Pak

•Plugs into Tour-Pak’s existing wiring•Includes detailed instructions•Made in the U.S.A.

POWER POD™ 2•Features a traditional 12V cigarette lighter-style power outlet on the top to power an iPod™, cell phone, or virtually any device that can be charged through a cigarette lighter

•New 2-prong SAE outlet on the bottom doubles its effectiveness by providing riders the ability to connect heated clothing, or as a convenient outlet to connect the bike to a trickle charger, all without the need for additional wiring to the battery

•Crafted of solid steel with a show chrome finish•Shockproof mechanism and weatherproof case•Universal mounting bracket for mounting on any bolt on the bike (up to 3/8”)•Installation is easy: mount it, attach the wire (with an included in-line fuse) to your battery, and it’s ready for the road

PART # DESCRIPTION SUG. RETAIL2130-0027 Power Pod $119.95

DS-305501DS-305502

2106-0043

2106-0030

DS-305504

Documents

10 ELECTRICAL (Electrique)2011