Embed Size (px)
Citation preview
CONTENTS
Safety Precautions 1
Before Installing 2
Packing List 3
Left-Hand
Left-Hand Tub Assembly 4
Left-Hand Main Frame Conversion 11
Right-Hand
Right-Hand Tub Assembly 15
Right-Hand Main Frame Conversion 22
Bill of Materials 26
Warranty 27
PLEASE FOLLOW ALL SAFETY INSTRUCTIONS PROVIDED IN THIS MANUAL BEFORE OPERATION. ARROWQUIP DOES NOT ACCEPT RESPONSIBILITY FOR ANY ACCIDENTS OR INJURY WHEN THIS SAFETY MANUAL HAS NOT BEEN READ IN FULL AND KEPT WITH THE PRODUCT AT ALL TIMES. OPERATORS OF THIS PRODUCT TAKE AND ACCEPT RESPONSIBILTY FOR ANY HARM OR INJURY TO THE ANIMAL OR OPERATOR WHEN IT PERTAINS TO HOW THE EQUIPMENT IS USED AND MAINTAINED.Please keep this manual for frequent reference and to pass on to new users or owners.
SAFETY PRECAUTIONS PLEASE FOLLOW ALL SAFETY PRECAUTIONS OUTLINED HEREIN. ANY HARM TO THE ANIMAL OR INJURY TO THE OPERATOR WHICH OCCURS DUE TO HOW THE PRODUCT IS OPERATED, OR RESULTING FROM A LACK OF SAFETY PRECAUTIONS ARE THE SOLE RESPONSIBILITY OF THE OPERATOR.
All farm machinery and equipment is potentially dangerous. Careless use of any Arrowquip livestock equipment may cause injury or damage to persons, cattle, or property. Arrowquip has taken precautions in the design and manufacturing of this product to ensure that it is safe and user-friendly. Therefore, the user must assume all responsibility and risk associated with the possession and use of the equipment.
WARNING: READ BELOW BEFORE OPERATION.
1. Ensure the operator understands the contents of this manual before using the cattle tub.2. Donotwearloose-fittedclothing.3. When assembling and disassembling the tub, ensure the parts are located on a firm,level,drysurfacewhichisfreeofrocksandothertriphazards.4. DonotmakeanymodificationstoArrowquipequipment.Non-factory modificationstotheequipmentcanreducethesafetyfortheoperatorandwillvoid warranty.5. DONOTALLOWCHILDRENUNDERTHEAGEOF18TOBENEARAN OPERATINGMACHINE.
1|SAFETYPRECAUTIONS
BEFOREINSTALLING|2
TOOLS
LevelGround HEAVYPartner Lift
Forklift Required
BEFORE INSTALLING
3/4" Wrench Alignment Bar9/16" Wrench
A
x1
2000652
B
x2
2000729
C
x5
7001812
E
x67001998
F
x6
7002064
G
x4
2000069
Z4
x2
7001811
H
x4
1/2"FLANGENUT
1/2" x 5" CARRIAGEBOLT
3/8"x23/4"CARRIAGEBOLT 3/8"FLANGENUT
PACKING LISTT10-DA90
3|PACKINGLIST
2000655
Z10
x1
C
LEFT-HANDTUBASSEMBLY|4
STEP 1
Leave gates strapped. Support main frame with forklift until connected to the alley, to keep it from
falling over.
LEFT-HANDTUB ASSEMBLY
CONNECT TO ALLEY
STEP 2
STEP 3
5|LEFT-HANDTUBASSEMBLY
CONNECT TO ALLEY
STEP 4
x3
STEP 5
EF
C
LEFT-HANDTUBASSEMBLY|6
BLEAVE NUTS LOOSE
HAVING TROUBLE WITH YOUR BOLTS?Unevengroundcancauseproblemswhenliningupyourpanels.Usingthealignmentbar to hold the panels together will allow you to put your tub together easily.
STEP 6
STEP 7
7|LEFT-HANDTUBASSEMBLY
C
B
STEP 8
STEP 9
LEFT-HANDTUBASSEMBLY|8
x3E
F
LEAVE NUTS LOOSE
C
x6
TIGHTEN ALL NUTS
STEP 10
G
9|LEFT-HANDTUBASSEMBLY
x2
Z4H
STEP 11
LEFT-HANDTUBASSEMBLY|10
11|LEFT-HANDMAINFRAMECONVERSION
LEFT-HANDMAIN FRAME CONVERSION
NOTE:Themainframewillcomeassembledfromthefactory.Ifyouneedtoconvertyour tub to right-hand, follow these instructions.
* You will need to fully disassemble your main frame before starting Step 1 *
STEP 1
x2G
H
Z4
Keep supported on forklift to prevent falling over for all steps.
STEP 3
G
Q
H
E
x2
STEP 2
LEFT-HANDMAINFRAMECONVERSION|12
4-A
4-F
4-E
4-D
4-C
4-B
4-G
STEP 4
E
MR
N
M
ER
O
PQ
S
13|LEFT-HANDMAINFRAMECONVERSION
LEFT-HANDMAINFRAMECONVERSION|14
STEP 5Strap the gates.
Refer to the Left-Hand Tub Assembly to complete. [ Page 4 ]
15|RIGHT-HANDTUBASSEMBLY
STEP 1
Leave gates strapped. Support main frame with forklift until connected to the alley, to keep it from
falling over.
RIGHT-HANDTUB ASSEMBLY
C
CONNECT TO ALLEY
STEP 2
STEP 3
RIGHT-HANDTUBASSEMBLY|16
CONNECT TO ALLEY
STEP 4
x3
STEP 5
EF
C
17|RIGHT-HANDTUBASSEMBLY
B
LEAVE NUTS LOOSE
HAVING TROUBLE WITH YOUR BOLTS?Unevengroundcancauseproblemswhenliningupyourpanels.Usingthealignmentbar to hold the panels together will allow you to put your tub together easily.
STEP 6
STEP 7
RIGHT-HANDTUBASSEMBLY|18
C
B
STEP 8
STEP 9
19|RIGHT-HANDTUBASSEMBLY
x3 E
F
LEAVE NUTS LOOSE
C
x6
TIGHTEN ALL NUTS
STEP 10
G
RIGHT-HANDTUBASSEMBLY|20
x2
Z4H
STEP 11
21|RIGHT-HANDTUBASSEMBLY
RIGHT-HANDMAINFRAMECONVERSION|22
STEP 1
RIGHT-HANDMAIN FRAME CONVERSION
NOTE:Themainframewillcomeassembledfromthefactory.Ifyouneedtoconvertyour tub to left-hand, follow these instructions.
* You will need to fully disassemble your main frame before starting Step 1 *
x2
G
H
Z4
Keep supported on forklift to prevent falling over for all steps.
STEP 3
G
Q
H
E
x2
STEP 2
23|RIGHT-HANDMAINFRAMECONVERSION
4-A
4-F
4-E
4-D
4-C
4-B
4-G
STEP 4
E
MR
N
M
ER
O
PQ
S
RIGHT-HANDMAINFRAMECONVERSION|24
STEP 5Strap the gates.
Refer to the Right-Hand Tub Assembly to complete. [ Page 15 ]
25|RIGHT-HANDMAINFRAMECONVERSION
1/4"HEXNUT
FR + SW
I
x12000723
K
x1
2000726
L
x1
2000704
M
x2
2000657
N
x12000658
O
x1
7002024
P
x1
7002102
Q
x1
7002000
R
x102000690
S
x1
2000632
T
x1
2000633
U
x1
2000660
V
x12002529
W
x1
2000006
X
x1
2000007
Y
x1
7001999
Z
x27002004
Z1
x2
2000639
Z2
x1
2000015
Z3
x1
1/2” x 3” CARRIAGEBOLT1/4" x 2 1/2" HEX BOLT
BILL OF MATERIALS | 26
3/4" x 1 1/2" HEX BOLT
3/4"HEXNUT
7001812
E
x167002064
G
x20
2000069
Z4
x8
7001811
H
x20
1/2"FLANGENUT
3/8"X23/4"CARRIAGEBOLT 3/8"FLANGENUT
A
x1
2000652
B
x2
2000729
C
x57001998
F
x61/2" x 5" CARRIAGEBOLT
BILL OF MATERIALST10-DA90
2000655
Z10
x1
Your product must be registered to claim warranty, and to ensure that Arrowquip has the required information to contact you in the event of a product or part recall. If the owner of the equipment fails to register the product with Arrowquip, they are considered to have voluntary voided the warranty.
NOTE:Anymodification,inanyfashion,toanyArrowquipequipmentimmediatelyvoids the product warranty. This includes the parts contained therein.
E.g. If amodification ismade to the squeezemechanism in a squeeze chute, andthe sternum bar is bent afterwards, warranty for the damaged part, the sternum bar, contained in the modified equipment, the squeeze chute, is void. In addition, anyremainingwarrantyforthesqueezechuteandotherpartscontainedtherein,including,but not limited to, the head gate, locking system, Q-Catch system, and rollers, is null and void.
REGISTER FOR WARRANTY NOW:Online:arrowquip.com/product-registration
Phone: 1-877-275-6075|Email: [email protected]
27|WARRANTY
WARRANTY
Printed in Canada
If you have any questions regarding the assembly of your product or require assistance,pleasecontactArrowquip’sClientCareTeamat1-877-275-6075
or by email at [email protected].
