1 SAFECOM & HTC Smart Powering Grid Patented technology, providing a complete set of unlimited backup Power for CATV networks & Without Batteries US PATENT

1

SAFECOM & HTC Smart Powering Grid Patented technology, providing a complete set of unlimited backup Power for CATV networks & Without Batteries

US PATENT 8,415,822US PATENT 5,747,888

2

Hulda transformers Company Profile: Established in 1975 and is owned by Kibbutz Hulda. A part of (KIA) the Kibbutz Industries Association represents over 300

factories & Companies owned by the kibbutz association in Israel. It total KIA has 35,000 employees & over 8 billions US$ sales/year.

3

Main Markets: Military & Aviation transformers. Medical equipment manufacture. Cable TV industry.

Safety standard:CE, BABT, IEC, VDE & UL

Quality Assurance Management System:ISO 9001:2008 certified.

Hulda transformers Company

4

Mr David ZilberbergPrivet company

Hulda transformers Company

Kibbutz Industries Association (KIA)

Kibbutz Organization

CATV Upstream noise blocker (UNB)

CATV Patented Powering

Kibbutz Hulda

5

Safecom's proven, patented SYNERGY-2, DPSV4, Power Booster & Dual T-former P.S turns CATV Optical & HTC networks into a super power synergy platform that provide most reliable and economic powering system for unlimited backup time.

Safecom Smart Powering Grid Patented technology, providing a complete set of unlimited backup Power for CATV networks & Without

Batteries

DPS v5Power Booster 4GSYNERGY-2

Dual T-former 2X 15A 60,66,72,87 V +

DOCSIS Monitoring

Dual outputs T-former 15A (Indoor -Europe

Standard ) 60,66,72,87 V

6

Based on the strategic placing of intelligent power management devices throughout the network, in the event of a power outage the SYNERGY-2 & DPS4 draws power from the distant available source over existing coax or power cables. Utilizing breakthrough direct AC/AC On-Line stabilize technology safecom's SYNERGY-2 and Power Booster ensures an optimal voltage level – even over long distances.

The Backup Power concept .

Unlimited backup Power for CATV networks & Without Batteries (60V & 90 V standard)

7

Based on the strategic placing of intelligent power management devices throughout the network, in the event of a power outage the DPSv5 draws power from the distance available source over existing coax or power cables.

Safecom's proven smart grid technologies greatly improve network powering reliability while creating significant savings in both capital and operational expenses.

1 2

3 4Power +

Signal

To remote / Node / Amplifier

Optical Node/Trunk

amp

P.S

2

1

3

4

AC 1 input .AC 2 input

Local output to local Optical Node. (AC+RF) Backup IN.OUT (AC+RF to remote Node/ amp)

DPS V5US PATENT 5747888 EP 0708559

Power Booster

Port

Monitoring Port: voltage,

RF PASS 5-1000 MHZ

AC 1

Local Remote

Current, status

AC 2

Unlimited backup Power for Optical & HFC networks Without Batteries

8

MINIMIZE THE NUMBER OF POWER SUPPLIES IN THE NETWORK. INCREASING THE POWERING AREA COVERED BY POWER SUPPLY

Vin 30-87Vac (US)Vin 30-64Vac (EU)

tv

tv

Vout 87 Vac (US) Vout 60 Vac (EU)

US PATENT 8,415,822

POWER BOOSTER US PATENT 8,415,822

Utilizing patented breakthrough direct on-line zero crossing AC/AC stabilize technology safecom's ensures an optimal voltage level to Optical Nodes & Line Amplifiers even the source of power from over long distances. Passive, Standalone element, power booster solves the power distribution problem in a CATV network caused by high-resistance and low energy efficient coax & electricity cables.

RF PASS 5-1000 MHZ

9

Power Booster – the 4G Transmission New Power Booster 4G

Integrated Dual Power inserter. Stand alone unit.

RF PASS 1GHZ

Voltage gain 1: 1.56 enabling up to double powering distance.

coverage area

Zero crossing - Smooth transition between conversion levels.

Technology

4 Automatic gears AC/AC transformation

gears

100 mA (EU model) 200 mA (US model)

Self current load

10

• All in One two-way RF Pass 1GHZ passive device that “toggle” available Power between two distant locations.• Redirecting power from the "normally" remote powered area to the area subject to power outage.• During the normal mode of operation, when there is no power outage at either end of the pair, the SYNERGY-2 act as power block to the other side. • Utilizing breakthrough step-up & stabilizing voltage technology the unit provides optimal & stable voltage level from local or remote P.S even from very long distance or using a un-stabilized P.S. =

DPS V 4 Power Booster

SYNERGY-2US PATENT 8,415,822

AC 1 input .AC 2 input Local output to local Optical Node. (AC+RF)

Backup IN.OUT (AC+RF to remote Node/ amp) 12

34

Power +

Signal

To remote / Node / Amplifier

Optical Node/Trunk

amp

P.S

21

3 4

+


11

Inputs/ Output configuration

Monitoring Inputs/outputs

ONLINE Current & Voltage +

status .

AC 2 - Input AC1 - Input

RF / AC 5-1000MHz 15A OUTPUT To Local Amplifier / Node

RF / AC 5-1000Mhz 15AINPUT / OUTPUTTo / From Remote Amplifier / Node

US PATENT 8,415,822

Vin 30-87V Vac (US)Vin 30-64V Vac (EU)

t

v

tv

Vout 87 Vac (US)Vout 60 Vac (EU)

• Inside view: SYNERGY-2 60/87V -2x15A

12

SYNERGY 2 the New generation.

Previous generations of DPS DPS Ver 4 SYNERGY-2

Limited by cable conductivity and Voltage drop.

External Power Booster required depend on voltage level when using remote powering.

Improved – Integrated power Booster (ALL in ONE). Remote backup powering

Required stabilizing P.S. (Ferro or T-former)

Required stabilizing P.S. (Ferro or T-former)

Improved .No required stabilizing P.S. Build in online zero crossing voltage stabilizer.

Stabilizing Voltage

External Dual power Inserter is needed Integrated Dual Power inserter. Integrated Dual Power inserter. Power Insertion

Required Two units. One unit. (+ optional Power Booster) One unit. Installation

--- Direct Monitoring outputs Via one Cable to IP transponders.

Direct Monitoring outputs Via one Cable to IP transponders. Monitoring


13

US PATENT 8,415,822Dual Port P.S + Docsis / EuroDOCSIS monitoring

NEW UR – Ultra Range +/- 25% Vin

aaaa a

a

a

DOCSIS® & EuroDOCSIS Status Monitoring, Embedded Transponder.

Direct RF connection to CATV network

Output 260,66,72 15A

Output 160,66,72 15A

External Monitoring DPS, SYNERGY-2 & more

Dual Port P.S model SC-D-TFPS-1800-E-O-M2 ports X 15A 60,75,87Vac 50/60 Hz .

Direct connection .Direct connection .

Voltage testing points

Current loop testing points

(For Clamp meter )

14

15

NEW-Dual Port P.S model SC-D-TFPS-1800-EOM2 ports X 15A 60,75,87Vac 50/60 Hz .

16

Direct RF connection to CATV network

Output 260,66,72 15A

External Monitoring DPS, SYNERGY-2 & more

NEW-Dual Port P.S model SC-D-TFPS-1800-UOM2 ports X 15A 60,75,87Vac 50/60 Hz .

Direct connection .

Output 160,66,72 15A

Direct connection .

Voltage testing points

Current testing points

Secondary AC input / Generator

Main AC input

Phase changer

120 KA SURGE SUPPRESSION

DOCSIS® & EuroDOCSIS Status Monitoring, Embedded Transponder.

17CATV Dual Port P.S 1350VA 15A 60,72,87V

Model SC-STFPS-1350-90EI

For hanging or shelf-lain mounting.

NEW-Dual Port P.S model SC-D-TFPS-1350-90UI2 ports, 15A 60,75,87Vac 50/60 Hz .

18

SYNERGY-2 Typical configuration Optical node + Trunk amplifier (or second optical node) .

Power + Signal

From Optical node 4

21

3

1234


Local output to local Optical Node. (AC+RF)Backup IN.OUT (AC+RF to remote Node/ amp)

Power + Signal

Optical Node21

3 4To remote / amplifier / Node P.S

.S

P.S

60V

60V

Optical NodeOr Trunk amplifier

60V60V

Area A

Area B


19

From Optical node

1234


Local output to local Optical Node. (AC+RF)Backup IN.OUT (AC+RF to remote Node/ amp)

Power + Signal

21

3 4To remote / amplifier / Node P.S

.S

P.S

SYNERGY-2 – Demo backup power from Area A to Area B

Power + Signal

60V55V50V

45V60V

Area A

Area B

21

43340V 60V

40V 60VOptical Node

Or Trunk amplifier

Optical Node


20

Power + Signal

To Optical node4

21

3

1234


Local output to local Optical Node.(AC+RF)Backup IN.OUT (AC+RF to remote Node/ amp)

Power + Signal

21

3 4From remote amplifier / Node

P.S.S

P.S

45V50V

55V

60V 60V

SYNERGY-2 – Demo backup power from Area B to Area A

P.S

Area A

Area B

40V 60V

Optical NodeOr Trunk amplifier

Optical Node


21

SAFECOM’s powering system around the world.Reliability since 1994

22

Power backup Comparisons

Synergy-2 / DPS V4

T-Former

Generators Non Standby

Standby + Batteries

Power Type

Low High Low High Cost

Zero Permanent Negligible Permanent Maintenance

UnlimitedLimited by

fuelNone

2 to 3 hour(Depends on batt.

condition )Backup Power

Low costVery

expensiveLow Very Expensive

Redundant/ Diversity

Optional NON NON NONIntegrated Surge Suppressor 120K

Optional NON NON NONIntegrated Phase

Changer

23

Typical optical network powering examples

24

90V-network60V-available

Deep Fiber Network 60V- SYNERGY backup power


25


HFC Network 90V- DPS5+ Power Booster backup power


26

Deep Fiber Network 90V- DPS5+ SYNERGY backup power


27

Business case.

Improving customer service and satisfaction. Enabling MSO to add new services that required top high

reliability. Unlimited backup time. Reducing dramatically CAPEX & OPEX. Increasing powering efficacy & save energy.

28

Complete Tree-View Import using CSV files• Also can discover One node at a time from the UI (on –demand discovery)• Network discovery• Export the Tree-View for further Use

1. Discovery can be backed up2. Automated Full Topology DPS/ SYNERGY back up

Auto Discovery of the PS Monitor• Supports any device that has an SCTE-HMS-PS-MIB• Supports auto discovery of thresholds (SCTE-HMS-COMMON-MIB)• Auto Generates Attribute Widgets with properly formatted thresholds• Supports all Adjacent devices like APC, Cordex Controllers etc.• Supports Discrete Thresholds

DOCSIS® & EuroDOCSIS Status Monitoring

29

• Monitors the Attributes – Pre-Configured Poll Interval– Summarization (Hourly, Daily)– Graphing (Single or Multiple attributes)– Attribute Refresh (on demand)

• Monitors the Current Alarm Table– Generates the Events from this table– Auto Correlation (If the alarm is pre-existing, does not generate a new

Alarm)– Updates the Tree-view with corresponding Severity – If SNMP Traps are enabled, It will auto-correlate the incoming traps with

Current Alarm table

30

Google Maps Integration

31

ON-LINE REPORT

32

Europe 60V & US 90V Standard. Support full 15A rms input /output. Prefect voltage at the remote location in the network. Water-proof Enclosure. (IPX8)�� Opposite connection protected. Input & Output Surge Protection.�� DOCSIS® & EuroDOCSIS Status Monitoring. Online RF transmission during operation. (INTERNET, VOD,

VOIP)

DPSv4 / SYNERGY-2/ Power Booster

Power Innovation

Standard Features

33

Summery SAFECOM SYNERGY-2 & DPSv5 & Power Booster offers CATV operators the

most efficient and reliable complete backup solution for an unlimited time at minimum cost.

No additional cost for MSO further to the fact that SYNERGY-2 / DPS v5 unit can be reused from HFC network to full optical network.

Following the government regulation for full powering backup. SYNERGY-2, DPSv5 & Power Booster systems, enabling additional backup from

remote powering. No maintenance. Unlimited lifetime. Two way powering on a single cable (Coax or electrical cable) Full DOCSIS® & EuroDOCSIS Status Monitoring

34

Thank you

Documents

1 SAFECOM & HTC Smart Powering Grid Patented technology, providing a complete set of unlimited backup Power for CATV networks & Without Batteries US PATENT