Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
PJSC “Sumy NPO”
PJSC “Sumy NPO”1
PJSC “Sumy NPO”, founded in 1896, is now one of the largest machine-building companies in Europe manufacturing equipment for oil, gas and chemical industries.Unique types of chemical facilities, centrifuges, pumps and valves for gas pipelines, oil – refining equipment and gas-filling stations, drill collars and complex gas treatment plants is far from being a complete list of products manufactured at the company.Products diversity owes to company's well-developed technical and process basis available. Company includes specialized production areas equipped with the most advanced equipment and modern control facilities. Company has a testing facility which complies with the strictest requirements to performance of acceptance testing of products manufactured.The concept of quality plays a key role in development process of all manufactured equipment. The high consideration given by management to quality and its control has been one of the main factors to determining the success of our company. All our manufacturing activities are covered by a quality assurance program, which has been audited and qualified in accordance with ISO 9001. All implementation of Q.A. program has been approved and is regularly audited by the international certification company “Bureau Veritas Quality International”.Since 1986 PJSC “Sumy NPO” has occupied firm position in CIS countries market as the main manufacturer of pipeline valves for gas industry.The valves manufactured by the company are based on high technology stamped and welded design with
wear-resistant elastomeric seals which provide reliable valve tightness.The product is distinguished by high quality, ease and convenience for service. PJSC "Sumy NPO" has been granted from the American Petroleum Institute the authority to use the API 6D monogram on ball and check valves, Certificates of Gosstandard (Russia) Conformity.Traditional Customers of pipeline valves are the largest oil and gas companies: JSC “Gazprom”, JSC “Surgutneftegaz”, JSC “Rosneft”, NJSC “Neftegaz of Ukraine”, SC “Uztransgaz”, SC “Turkmengaz”, NC “Kazmunaygas”, JSC “Beltransgaz”, “ZEROMAX GmbH”, etc.By now the whole range of valves with pressure of 80, 100 and 160 Bar required for gas mains and compressor stations construction has been mastered.
The product range incorporates:l Ball valves DN 50 - 1400;l Check valves DN 50 - 1000;l Convex strainers DN 200 - 1000.
PJSC “Sumy NPO” also produces other types of valves, namely:l with flanged end connection completed with
counter flanges, fasteners and sealing parts;l for aggressive natural gas containing hydrogen
sulfide;l with electric actuators of different Companies upon
Customer's request;l with valve emergency shut off automatic device.
Pipeline valves
Content2
Ball valves DN 50 – 150 PN 80, 100 4
Ball valve DN 50 PN 100 with Manual Actuator 5
Ball valve DN 50 PN 100 with Pneumatic Actuator 6
Ball valve DN 50 PN 100 with Pneumatic Actuator for underground installation 7
Ball valve DN 50 PN 100 with Electric Actuator 8
Ball valve DN 80 PN 100 with Manual Actuator 9
Ball valve DN 80 PN 100 with Manual Actuator 10
Ball valve DN 80 PN 100 with Pneumatic Actuator 11
Ball valve DN 80 PN 100 with Pneumatic Actuator for underground installation 12
Ball valve DN 80 PN 100 with Electric Actuator 13
Ball valve DN 100 PN 100 with Manual Actuator 14
Ball valve DN 100 PN 100 with Pneumatic Actuator 15
Ball valve DN 100 PN 100 with Pneumatic Actuator for underground installation 16
Ball valve DN 100 PN 100 with Electric Actuator 17
Ball valve DN 150 PN 100 with Manual Actuator 18
Ball valve DN 150 PN 100 with Manual Actuator for underground installation 19
Ball valve DN 150 PN 100 with Pneumatic-and-Hydraulic Actuator 20
Ball valve DN 150 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation 21
Ball valves DN 200 – 1400 PN 80, 100 22Ball valve DN 200 PN 100 with Manual Actuator 23
Ball valve DN 200 PN 100 with Pneumatic-and-Hydraulic Actuator 24
Ball valve DN 200 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation 25
Ball valve DN 300 PN 100 with Manual Actuator 26
Ball valve DN 300 PN 100 with Manual Actuator for underground installation 27
Ball valve DN 300 PN 100 with Pneumatic-and-Hydraulic Actuator 28
Ball valve DN 300 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation 29
Ball valve DN 400 PN 100 with Manual Actuator 30
Ball valve DN 400 PN 100 with Pneumatic-and-Hydraulic Actuator 31
Ball valve DN 400 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation 32
Ball valve DN 500 PN 100 with Manual Actuator 33
Ball valve DN 500 PN 100 with Manual Actuator for underground installation 34
Ball valve DN 500 PN 100 with Pneumatic-and-Hydraulic Actuator 35
Ball valve DN 500 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation 36
Ball valve DN 700 PN 100 with Manual Actuator 37
Ball valve DN 700 PN 100 with Manual Actuator for underground installation 38
Ball valve DN 700 PN 100 with Pneumatic-and-Hydraulic Actuator 39
Ball valve DN 700 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation 40
Ball valve DN 1000 PN 100 with Pneumatic-and-Hydraulic Actuator 41
Ball valve DN 1000 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation 42
Ball valve DN 1200 PN 100 with Pneumatic-and-Hydraulic Actuator 53
Ball valve DN 1200 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation 44
Ball valve DN 1400 PN 100 with Pneumatic-and-Hydraulic Actuator 45
Ball valve DN 1400 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation 46
Check valves DN 300…1000 PN 80, 100, 160 47
Check valve DN 300 PN 80 48
Check valve DN 300 PN 100 49
Check valve DN 300 PN 160 50
Check valve DN 400 PN 100 51
Check valve DN 500 PN 100 52
Check valve DN 700 PN 100 53
Content
Content3
Check valve DN 1000 PN 80 54
Convex strainers DN 400 – 1000 PN 80, 100, 200 55
Convex strainer DN 400 PN 100 56
Convex strainer DN 500 PN 100 57
Convex strainer DN 500 PN 200 58
Convex strainer DN 700 PN 100 59
Convex strainer DN 1000 PN 100 60
Valves to complete the manufactured equipment 61
Ball valve DN 50 PN 16 with Electric Actuator 62
Ball valve DN 65 PN 16 with Manual Actuator 63
Ball valve DN 65 PN 10 with Electric Actuator 64
Ball valve DN 80 PN 16 with Electric Actuator 65
Check valve DN 50 PN 16 66
Check valve DN 50 PN 25 67
Check valve DN 50 PN 100 68
Check valve DN 50 PN 160 69
Check valve DN 65 PN 25 70
Check valve DN 80 PN 25 71
Check valve DN 80 PN 40 72
Check valve DN 80 PN 100 73
Check valve DN 100 PN 25 74
Check valve DN 100 PN 100 75
Check valve DN 150 PN 63 76
Check valve DN 150 PN 160 77
Check valve DN 200 PN 100 78
Check valve DN 200 PN 160 79
Check valve DN 300 PN 63 80
Check valve DN 300 PN 100 81
Check valve DN 400 PN 63 82
Convex strainer DN 200 PN 100 83
Wedge gate valve DN 50 PN 16 84
Wedge gate valve DN 80 PN 16 85Wedge gate valve DN 100 PN 16 86Wedge gate valve DN 150 PN 16 87Shut-off control valve DN 15 PN 250 Kv0.1 88Shut-off control valve DN 25 PN 100 Kv0.1 89Shut-off control valve DN 25 PN 160 Kv8 with Manual Actuator 90Shut-off control valve DN 40 PN 100 Kv32 with Manual Actuator 91Shut-off control valve DN 40 PN 160 Kv32 with Manual Actuator 92Shut-off control valve DN 65 PN 63 93 Data Sheet for Ball Valve 94
Data Sheet for Check Valve 96
Data Sheet for Convex Strainer 97
List of Specifications for Valves Given in the Catalog 98
Certificates and Approvals 99
Pipeline valves
Ball valves DN 50…150 PN 80, 1004
Designed for operation as shut-off devices in process lines transporting non-aggressive natural gas and other non-aggressive media with temperature ranged -60°C to +80°C.
Closure member tightness class is per A grade (GOST 9544)
Seat seals are made of elastomeric and composite materials.
Weld connection is available (flanged is optional).
Climatic version is for areas with temperate and cold climate (-60°C thru +45°C)
Ball valves are available with operator different options: manual, pneumatic and pneumatic-and- hydraulic.
Installation type is over-ground and underground.
Manually operated ball valves are installed in any position, and pneumatically and pneumatically and hydraulically operated ball valves are installed in horizontal pipelines with actuator facing upwards.
The average service life before overhaul is no more than 40 years.
The Company reserves the right to make changes in valve design to improve it, while minor changes may not be shown in the Catalog.
Design Features:
l Valve is a stamped two-piece, split body; the design enables to reduce gas escaping into the environment;
l Closure member is sealed with high wear/erosion resistant elastomeric material;
l Both seats are tightened to the ball ensuring high leakproof closure member;
l “Trunnion mounted ball” with self-lubricating bearings made of metal-fluoroplastic that makes easy valves control;
l Pneumatically actuated ball valves are furnished with override;
l Ball valves with pneumatic-and-hydraulic actuator are furnished with hand pump;
l Liquid damper is used in pneumatic actuator;
l Ball valves control units have integral terminal boxes, limit switches, and they do not require additional piping;
l Control voltage - 24, 110 and 220;
l Ball valves can be furnished with electric actuators;
l Ball valves for underground installation are available with corrosion-resistant polymer coating.
DN 150 PN 100
DN 50 PN 100
DN 150 PN 100
Ball valves
Ball valve DN 50 PN 100 with manual Actuator5
19
8
200
3
330
430
80
Product designation КШ-50-100-Р-НУ-УХЛ1-Пр
Figure designation А.1.2750.202.301.00
Diameter Nominal, DN, mm 50
Pressure Nominal, PN, MPa 10.0
Actuator type manual
Connection welded end (WE)*
Material of main parts
Body steel 10Г2, zinc chromating 15 μ
Ball steel 10Г2, HCP 25 μ
Stem steel 38 XA, HCP 21 μ
Seat (cover) steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 50 PN 100 with Pneumatic Actuator6
80
96
55
413
306
199
540
200
Product designation КШ-50-100-Р-НУ-УХЛ1-Пр
Figure designation А.1.2750.202.302.00
Diameter Nominal, DN, mm 50
Pressure Nominal, PN, MPa 10.0
Actuator type pneumatic
Manual override type handle
Control unit electro-pneumatic with built-in limit switches
Actuator operating medium dry clean non-aggressive gaseous, meet requirements of the unit, separate source supply
Pressure range of operating mediumat max. pressure differential, MPa 2.5…10.0
Control unit voltage, V DC 24, 110, 220
Connection welded end (WE)*
Material of main parts
Body steel 10Г2, zinc chromating 15 μ
Ball steel 10Г2, HCP 25 μ
Stem steel 38 XA, HCP 21 μ
Seat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 50 PN 100 with Pneumatic Actuator for underground installation7
80
96
55
306
199540
200
20002413
279
Product designation КШ-50-100-ПП-ПУ-УХЛ1-ПрFigure designation 1.2750.202.360.00Diameter Nominal, DN, mm 50Pressure Nominal, PN, MPa 10.0Actuator type pneumaticControl unit electro-pneumatic with internal end switchesActuator operating medium dry clean non-aggressive gaseous, meet requirements of the unit, separate source supplyPressure range of operating mediumat max. pressure differential, MPa 2.5…10.0Control unit voltage, V DC 24, 110, 220 Connection welded end (WE)*
Material of main partsBody steel 10Г2, zinc chromating 15 μBall steel 10Г2, HCP 25 μStem steel 38 XA, HCP 21 μSeat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 50 PN 100 with Electric Actuator8
2684
268
410
29
0
55
5
Product designation КШ-50-100-ЭП-НУ-УХЛ1-Ф-Ф
Figure designation 1.2750.230.306.00-07
Diameter Nominal, DN, mm 50
Pressure Nominal, PN, MPa 10.0
Actuator type electric
Power Voltage 380 V AC
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)*
Material of main parts
Body steel 08Х18Н10Т
Ball steel 20Х13
Stem steel 20Х13
Seat steel 10Г2
Flange steel 10Г2
* Pipe is beveled to the pipe specified by a Customer
A
A
Ball valves
Ball valve DN 80 PN 100 with Manual Actuator9
295
250
126
295
50
420
Product designation КШ-80-100-Р-НУ-УХЛ1-Пр
Figure designation 1.2750.201.301.00
Diameter Nominal, DN, mm 80
Pressure Nominal, PN, MPa 10.0
Actuator type manual
Connection welded end (WE)*
Material of main parts
Body steel 09Г2C
Ball steel 10Г2, HCP 21 μ
Stem steel 40X, HCP 21 μ
Seat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 80 PN 100 with Manual Actuator10
296
268
448
M24-7H8 holes
430
260
119
50
Product designation КШ-80-100-Р-НУ-УХЛ1-Ф-Ф
Figure designation 1.2750.237.301.00-01
Diameter Nominal, DN, mm 80
Pressure Nominal, PN, MPa 10.0
Actuator type manual
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)*
Material of main parts
Body steel 10Г2, zinc chromating 24 μ
Ball steel 10Г2, HCP 21 μ
Stem steel 40X, HCP 21 μ
Counter flange steel 10Г2
Seat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 80 PN 100 with Pneumatic Actuator11
680
250
A
480
126
315
A
Product designation КШ-80-100-ПП-НУ-УХЛ1-Пр
Figure designation 1.2750.201.304.00-01
Diameter Nominal, DN, mm 80
Pressure Nominal, PN, MPa 10.0
Actuator type pneumatic
Control unit electro-pneumatic with built-in limit switches
Actuator operating medium non-aggressive gaseous, separate source supply
Pressure range of operating mediumat max. pressure differential, MPa 2.5…10.0
Control unit voltage, V DC 24, 110, 220
Connection welded end*
Material of main parts
Body steel 09Г2С
Ball steel 10Г2, HCP 21 μ
Stem steel 40X, HCP 21 μ
Seat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 80 PN 100 with Pneumatic Actuator for underground installation12
680
250
A
2480
126
315
A
112
2186
Product designation КШ-80-100-ПП-ПУ-УХЛ1-Пр
Figure designation 1.2750.201.360.00-01
Diameter Nominal, DN, mm 80
Pressure Nominal, PN, MPa 10.0
Actuator type pneumatic
Control unit electro-pneumatic with built-in limit switches
Actuator operating medium non-aggressive gaseous, separate source supply
Pressure range of operating mediumat max. pressure differential, MPa 2.5…10.0
Control unit voltage, V DC 24, 110, 220
Connection welded end (WE)*
Material of main parts
Body steel 09Г2С
Ball steel 10Г2, HCP 21 μ
Stem steel 40X, HCP 21 μ
Seat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 80 PN 100 with Electric Actuator13
324
Ø180
A180
660
268
448
M248 holes
A
Product designation КШ-80-100-ЭП-НУ-УХЛ1-Ф-Ф
Figure designation 1.2750.236.306.00-01
Diameter Nominal, DN, mm 80
Pressure Nominal, PN, MPa 10.0
Actuator type electric
Voltage 380 V, 3 ph, 50 Hz
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)*
Material of main parts
Body steel 10Г2, zinc chromating 24 μ
Ball steel 10Г2, HCP 21 μ
Stem steel 38ХA, HCP 21 μ
Flange steel 10Г2
Seat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 100 PN 100 with Manual Actuator14
600
300 750
135
340
50
Ø280
Product designation КШ-100-100-Р-НУ-УХЛ1-Пр
Figure designation 1.2750.151.160.00
Diameter Nominal, DN, mm 100
Pressure Nominal, PN, MPa 10.0
Actuator type manual
Connection welded end (WE)*
Material of main parts
Body steel 09Г2C
Ball steel 10Г2, HCP 21 μ
Stem steel 40X, HCP 21 μ
Seat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
A
A
Ball valves
Ball valve DN 100 PN 100 with Pneumatic Actuator15
660
A
300
520
130
328
A
Product designation КШ-80-100-ПП-НУ-УХЛ1-Пр
Figure designation 1.2750.151.102.00-06
Diameter Nominal, DN, mm 100
Pressure Nominal, PN, MPa 10.0
Actuator type pneumatic
Control unit electro-pneumatic with built-in limit switches
Actuator operating medium non-aggressive gaseous, separate source supply
Pressure range of operating mediumat max. pressure differential, MPa 2.5…10.0
Control unit voltage, V DC 24, 110, 220
Connection welded end*
Material of main parts
Body steel 09Г2С
Ball steel10Г2, HCP 21 μ
Stem steel 40X, HCP 21 μ
Seat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 100 PN 100 with Pneumatic Actuator for underground installation16
660
A
300
2520
130
330
Ø92
A
150
2210
2000
Product designation КШ-100-100-ПП-ПУ-УХЛ1-Пр
Figure designation 1.2750.209.360.00
Diameter Nominal, DN, mm 100
Pressure Nominal, PN, MPa 10.0
Actuator type pneumatic
Control unit electro-pneumatic with built-in limit switches
Actuator operating medium non-aggressive gaseous, separate source supply
Pressure range of operating mediumat max. pressure differential, MPa 2.5…10.0
Control unit voltage, V DC 24, 110, 220
Connection welded end*
Material of main parts
Body steel 09Г2С
Ball steel10Г2, HCP 21 μ
Stem steel 40X, HCP 21 μ
Seat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 100 PN 100 with Electric Actuator17
300
925
510
Product designation КШ-100-100-ЭП-НУ-УХЛ1-Пр
Figure designation 1.2750.341.306.00
Diameter Nominal, DN, mm 100
Pressure Nominal, PN, MPa 10.0
Actuator type electric
Voltage 380 V, 3 ph, N=250 W
Connection welded end (WE)*
Weight, not more, kg 130
Material of main parts
Body steel 09Г2C
Ball steel 10Г2, HCP 21 μ
Stem steel 38ХA, HCP 21 μ
Seat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 150 PN 100 with Manual Actuator18
A
A
400
445
260
690
206
185
Ø310
Product designation КШ-150-100-РП-НУ-УХЛ1-Пр
Figure designation 1.2750.152.101.00-06
Diameter Nominal, DN, mm 150
Pressure Nominal, PN, MPa 10.0
Actuator type manual mechanical
Connection welded end (WE)*
Material of main parts
Body steel 09Г2C
Ball steel10Г2, HCP 21 μ
Stem steel 40X, HCP 21 μ
Seat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 150 PN 100with Manual Actuator for underground installation19
A
A
400
445
260
2630
208
185
2000
Product designation КШ-150-100-РП-ПУ-УХЛ1-Пр
Figure designation 1.2750.158.101.00-02
Diameter Nominal, DN, mm 150
Pressure Nominal, PN, MPa 10.0
Actuator type manual mechanical
Connection welded end (WE)*
Material of main parts
Body steel 09Г2C
Ball steel10Г2, HCP 21 μ
Stem steel 40X, HCP 21 μ
Seat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 150 PN 100 with Pneumatic-and-Hydraulic Actuator20
875
400
206
185
620
2808
16
Product designation КШ-150-100-ПГП-НУ-УХЛ1-ПрFigure designation 1.2750.152.104.00-06Diameter Nominal, DN, mm 150Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override - hydraulic pump Control unit electro-pneumatic with built-in limit switchesActuator operating medium non-aggressive gaseous, separate source supplyPressure range of operating mediumat max. pressure differential, MPa 2.5…10.0Control unit voltage, V DC 24, 110, 220 Connection welded end (WE)*
Material of main partsBody steel 09Г2СBall steel10Г2, HCP 21 μStem steel 40X, HCP 21 μSeat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
A
A
Ball valves
Ball valve DN 150 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation21
875
400
2000
185
725
22802820
208
Product designation КШ-150-100-ПГП-ПУ-УХЛ1-ПрFigure designation 1.2750.152.160.00-06Diameter Nominal, DN, mm 150Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pump Control unit electro-pneumatic with built-in limit switchesActuator operating medium non-aggressive gaseous, separate source supplyPressure range of operating mediumat max. pressure differential, MPa 2.5…10.0Control unit voltage, V DC 24, 110, 220 Connection welded end (WE)*
Material of main partsBody steel 09Г2СBall steel10Г2, HCP 21 μStem steel 40X, HCP 21 μSeat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
A
A
Pipeline valves
Ball valves DN 200 – 1400 PN 80, 10022
Designed for operation as shut-off devices in process lines transporting non-aggressive natural gas and other non-aggressive media with temperature ranged -60°C to +80°C.Closure member tightness class is per A grade (GOST 9544)Seat seals are made of elastomeric and composite materials.Weld connection is available (flanged is optional).Climatic version is for areas with temperate and cold climate (-60°C thru +45°C)Ball valves are available with operator different options: manual, pneumatic and pneumatic-and-hydraulic.Installation type is over-ground and underground.Ball valves can be completed with valve emergency shut off automatic device (for DN 400-1400).Manually operated ball valves are installed in any position, and pneumatically and pneumatically and hydraulically operated ball valves are installed in horizontal pipelines with actuator facing upwards. Vertical axial deviation shall be not more than 10°.The average service life before overhaul is no more than 40 years.
The Company reserves the right to make changes in valves` design to improve it, while minor changes may not be shown in the Catalog.
Design features:
l Valve is a stamped two-piece, split body; the design enables to reduce gas escaping into the environment;
l Closure member is sealed with high wear/erosion resistant elastomeric material;
l Both seats are tightened to the ball ensuring high leakproof closure member;
l ”Trunnion mounted ball” with self-lubricating bearings made of metal-fluoroplastic that makes easy valves control;
l Pneumatically and hydraulically actuated ball valves are furnished with override (hydraulic pump);
l ”No tank” actuator design greatly reduces hydraulic liquid volume in the actuator hydraulic system;
l Pneumatic-and-hydraulic actuators are filled with hydraulic liquid;
l Ball valve control units have integrated terminal boxes, and limit switches; and they do not require additional piping;
l Control voltage - 24, 110 and 220;
l Electric actuators can be furnished with electric actuators;
l Ball valves for underground service are available with corrosion-resistant polymer coating. DN 1400 PN 100
DN 700 PN 100
Ball valves
Ball valve DN 200 PN 100 with Manual Actuator23
30
236
500
610 605
480
300
50
275
536
995
385
Product designation КШ-200-100-РП-НУ-УХЛ1-Пр
Figure designation А.1.2750.150.101.00-06
Diameter Nominal, DN, mm 200
Pressure Nominal, PN, MPa 10.0
Actuator type manual mechanical
Connection welded end (WE)*
Weight, not more, kg 300
Material of main parts
Body steel 09Г2C
Ball steel 20ГЛ, HCP 30 μ
Stem steel 38 XA, HCP 21 μ
Seat (cover) steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 200 PN 100 with Pneumatic-and-Hydraulic Actuator24
30
236
500480
300
1160
385
275
1100
88
Product designation КШ-200-100-ПГП-НУ-УХЛ1-ПрFigure designation А.1.2750.150.104.00-06Diameter Nominal, DN, mm 200Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pump Control unit electro-pneumatic with built-in limit switchesActuator operating medium non-aggressive gaseous, separate source supplyPressure range of operating mediumat max. pressure differential, MPa 2.5…10.0Control unit voltage, V DC 24, 110, 220 Connection welded end (WE)*Weight, not more, kg 390
Material of main partsBody steel 09Г2СBall steel 20ГЛ, HCP 30 μStem steel 38XА, HCP 21 μSeat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 200 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation25
1160
30
236
500480
300
88
385
275
2000
3100
Product designation КШ-200-100-ПГП-ПУ-УХЛ1-ПрFigure designation А.1.2750.150.160.00Diameter Nominal, DN, mm 200Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pump Control unit electro-pneumatic with built-in limit switchesActuator operating medium non-aggressive gaseous, separate source supplyPressure range of operating mediumat max. pressure differential, MPa 2.5…10.0Control unit voltage, V DC 24, 110, 220Connection welded end (WE)*Weight, not more, kg 615
Material of main partsBody steel 09Г2СBall steel 20ГЛ, HCP 30 μStem steel 45XГМА, HCP 21 μSeat steel 10Г2, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 300 PN 100 with Manual Actuator26
A
A
420
615
50
425
690
347
11254
62
420
Product designation КШ-300-100-РП-НУ-УХЛ1-Пр
Figure designation 1.2750.284.101.00
Diameter Nominal, DN, mm 300
Pressure Nominal, PN, MPa 10.0
Actuator type manual mechanical
Connection welded end*
Weight, not more, kg 527
Material of main parts
Body steel 09Г2C, zinc chromating 24 μ
Ball steel 20ГЛ, HCP 21 μ
Stem steel 38 XA, HCP 21 μ
Seat steel 09Г2C, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 300 PN 100 with Manual Actuator for underground installation27
450
50
424
690
420
715615
3235
2000
347
420
Product designation КШ-300-100-РП-ПУ-УХЛ1-ПрFigure designation A.1.2750.276.101.00Diameter Nominal, DN, mm 300Pressure Nominal, PN, MPa 10.0Actuator type manual mechanicalConnection welded end*Weight, not more, kg 787
Material of main partsBody steel 09Г2C, zinc chromating 24 μBall steel 20ГЛ, HCP 21 μStem steel 38 XA, HCP 21 μSeat steel 09Г2C, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 300 PN 100 with Pneumatic-and-Hydraulic Actuator28
1500 825
295
1287
115
420
347
425
690
50
420
Product designation КШ-300-100-ПГП-НУ-УХЛ1-ПрFigure designation 1.2750.284.104.00Diameter Nominal, DN, mm 300Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pump Control unit electro-pneumatic with unit of limit switchesActuator operating medium supply from pipeline Pressure range of operating mediumat max. pressure differential, MPa 2.5…10.0Control unit voltage, V 24, 110, 220 DCConnection welded end (WE)*Weight, not more, kg 600
Material of main partsBody steel 09Г2С zinc chromating 24 μBall steel 20ГЛ, HCP 21 μStem steel 38XА, HCP 21 μSeat steel 09Г2С, zinc chromating 9 μ
*Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 300 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation29
420690
42550
420
347
2462 2
000
1500 825
295
3290
Product designation КШ-300-100-ПГП-ПУ-УХЛ1-ПрFigure designation A.1.2750.194.160.00Diameter Nominal, DN, mm 300Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pump Control unit electro-pneumatic with unit of limit switchesActuator operating medium supply from pipeline Pressure range of operating mediumat max. pressure differential, MPa 2.5…10.0Control unit voltage, V DC 24, 110, 220 Connection welded end (WE)*Weight, not more, kg 920
Material of main partsBody steel 09Г2С zinc chromating 24 μBall steel 20ГЛ, HCP 21 μStem steel 38XА, HCP 21 μSeat steel 09Г2С, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 400 PN 100 with Manual Actuator30
840
1425
500
670452
860
60
Product designation КШ-400-100-РП-НУ-УХЛ1-Пр
Figure designation 1.2750.285.101.00
Diameter Nominal, DN, mm 400
Pressure Nominal, PN, MPa 10.0
Actuator type manual mechanical
Connection welded end*
Weight, not more, kg 1101
Material of main parts
Body steel 09Г2C, zinc chromating 24 μ
Ball steel 20ГЛ, HCP 30 μ
Stem steel 38 XA, HCP 21 μ
Seat steel 09Г2C, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 400 PN 100 with Pneumatic-and-Hydraulic Actuator 31
1460
1600
500
670
150
1835
130
450
452
860
60
Product designation КШ-400-160-ПГП-HУ-УХЛ1-ПрFigure designation 1.2750.285.104.00Diameter Nominal, DN, mm 400Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pump Control unit electro-pneumatic with unit of limit switchesActuator operating medium supply from pipeline Pressure range of operating mediumat max. pressure differential, MPa 2.5…10.0Control unit voltage, V DC 24,110, 220 Connection welded end (WE)*Weight, not more, kg 1250
Material of main partsBody steel 09Г2С, zinc chromating 24 μBall steel 20ГЛ, HCP 30 μStem steel 38XА, HCP 21 μSeat steel 09Г2С, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 400 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation32
18341460
150
60452
860
670
2000
3600
130
450
500
Product designation КШ-400-160-ПГП-ПУ-УХЛ1-ПрFigure designation A.1.2750.161.104.00Diameter Nominal, DN, mm 400Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pump Control unit electro-pneumatic with unit of limit switchesActuator operating medium supply from pipeline Pressure range of operating mediumat max. pressure differential, MPa 2.5…10.0Control unit voltage, V DC 24,110, 220 Connection welded end (WE)*Weight, not more, kg 1595
Material of main partsBody steel 09Г2С, zinc chromating 24 μBall steel 20ГЛ, HCP 30 μStem steel 38XА, HCP 21 μSeat steel 09Г2С, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 500 PN 100 with Manual Actuator33
969
573
600
140
432
1020
517
540
107
1005
Ø930
16
1689
Product designation КШ-500-100-РП-НУ-УХЛ1-Пр
Figure designation 1.2750.315.101.00
Diameter Nominal, DN, mm 500
Pressure Nominal, PN, MPa 10.0
Actuator type manual mechanical
Connection welded end (WE)*
Weight, not more, kg 1834
Material of main parts
Body steel 09Г2C
Ball steel 20ГЛ, HCP 30 μ
Stem steel 40X, HCP 21 μ
Seat (cover) steel 09Г2C, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 500 PN 100 with Manual Actuator for underground installation34
1090
1005
400
600432
1020
16
180
2000
540
36
90
440
Product designation КШ-500-100-РП-ПУ-УХЛ1-Пр
Figure designation 1.2750.315.155.00
Diameter Nominal, DN, mm 500
Pressure Nominal, PN, MPa 10.0
Actuator type manual mechanical
Connection welded end (WE)*
Weight, not more, kg 2430
Material of main parts
Body steel 09Г2C, zinc chromating 24 μ
Ball steel 20ГЛ, HCP 30 μ
Stem steel 40X, HCP 21 μ
Seat (cover) steel 09Г2C, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 500 PN 100 with Pneumatic-and-Hydraulic Actuator35
1952
1255
809
600
140
432
1020
16
107
540
180
517
Product designation КШ-500-100-ПГП-HУ-УХЛ1-Пр
Figure designation 1.2750.315.104.00
Diameter Nominal, DN, mm 500
Pressure Nominal, PN, MPa 10.0
Actuator type pneumatic-and-hydraulic
Actuator operating medium supply from pipeline
Pressure range of operating mediumat pressure differential on valveclosure member up to 2.0 MPa, MPa 2.5…10.0
Control unit voltage, V DC 24,110, 220
Connection welded end (WE)*
Weight, not more, kg 2078
Material of main parts
Body steel 09Г2С
Ball steel 20ГЛ, HCP 30 μ
Stem steel 40X, HCP 21 μ
Seat steel 09Г2С, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 500 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation36
1952809
Б
200
600432
1020
16
125
2000
3655
540
440
Б
Product designation КШ-500-100-ПГП-ПУ-УХЛ1-ПрFigure designation 1.2750.315.160.00Diameter Nominal, DN, mm 500Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pump Control unit electro-pneumatic with unit of limit switchesActuator operating medium supply from pipeline Pressure range of operating mediumat pressure differential on valveclosure member up to 2.0 MPa, MPa 2.5…10.0Control unit voltage, V DC 24,110, 220 Connection welded end (WE)*Weight, not more, kg 2680
Material of main partsBody steel 09Г2С, zinc chromating 24 μBall steel 20ГЛ, HCP 30 μStem steel 40X, HCP 21 μSeat steel 09Г2С, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 700 PN 100 with Manual Actuator37
690
1380
920
1080
490
100
211
4
775
Ø1220
Product designation КШ-700-100-РП-НУ-УХЛ1-Пр
Figure designation 1.2750.148.101.00-08
Diameter Nominal, DN, mm 700
Pressure Nominal, PN, MPa 10.0
Actuator type manual mechanical
Connection welded end (WE)*
Weight, not more, kg 3955
Material of main parts
Body steel 09Г2C
Ball steel 20ГЛ, HCP 30 μ
Stem steel 40X, HCP 21 μ
Seat (cover) steel 09Г2C, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 700 PN 100 with Manual Actuator for underground installation38
6901380
100
775
689
1800
185
3914
490
1080
9201265
Ø1220
Product designation КШ-700-100-РП-ПУ-УХЛ1-Пр
Figure designation 1.2750.155.101.00-02
Diameter Nominal, DN, mm 700
Pressure Nominal, PN, MPa 10.0
Actuator type manual mechanical
Connection welded end (WE)*
Weight, not more, kg 4780
Material of main parts
Body steel 09Г2C
Ball steel 20ГЛ, HCP 30 μ
Stem steel 40X, HCP 21 μ
Seat (cover) steel 09Г2C, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 700 PN 100 with Pneumatic-and-Hydraulic Actuator39
920
1440
2065
185
Ø1220
2195
690100
775
1380
689
Product designation КШ-700-100-ПГП-HУ-УХЛ1-ПрFigure designation 1.2750.148.104.00-06Diameter Nominal, DN, mm 700Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pump Control unit electro-pneumatic with unit of limit switchesActuator operating medium supply from pipeline Min. control pressure at pressure differential at valve closure member up to 2.0 MPa, MPa 2.5Control unit voltage, V DC 24,110, 220Connection welded end (WE)*Weight, not more, kg 4205
Material of main partsBody steel 09Г2С, zinc chromating 24 μBall steel 20ГЛ, HCP 30 μStem steel 40X, HCP 21 μSeat steel 09Г2С, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 700 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation40
100690
1380
2195 1440
920
1265
185
1800
775
689
3865
Product designation КШ-700-100-ПГП-ПУ-УХЛ1-ПрFigure designation 1.2750.156.104.00-02Diameter Nominal, DN, mm 700Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pump Control unit electro-pneumatic with unit of limit switchesActuator operating medium supply from pipeline Min. control pressure at pressure differentialat valve closure member up to 2.0 MPa, MPa 2.5Control unit voltage, V DC 24,110, 220 Connection welded end (WE)*Weight, not more, kg 5040
Material of main partsBody steel 09Г2С, zinc chromating 24 μBall steel 20ГЛ, HCP 30 μStem steel 40X, HCP 21 μSeat steel 09Г2С, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 1000 PN 100 with Pneumatic-and-Hydraulic Actuator41
900
1780
100
97011
38
2790
1635
818
545
1450
1051
2720
Product designation КШ-1000-100-ПГП-HУ-УХЛ1-ПрFigure designation 1.2750.149.104.00-02Diameter Nominal, DN, mm 1000Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pumpControl unit electro-pneumatic with unit of limit switchesControl unit voltage, V DC 24,110, 220 Actuator operating medium supply from pipeline Min. control pressure at pressure differentialat valve closure member up to 2.0 MPa, MPa 2.5Connection welded end (WE)*Weight, not more, kg 12000
Material of main partsBody steel 09Г2С, zinc chromating 24 μBall steel 20ГЛ, HCP 30 μStem steel 40X, HCP 21 μSeat steel 09Г2С, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 1000 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation42
27401635
1450
478
1780
900
100
970
1800
162
4520
1050
Product designation КШ-1000-100-ПГП-ПУ-УХЛ1-ПрFigure designation 1.2750.157.104.00-02Diameter Nominal, DN, mm 1000Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pump Control unit electro-pneumatic with unit of limit switchesControl unit voltage, V DC 24,110, 220 Actuator operating medium supply from pipeline Min. control pressure at pressure differential at valve closure member up to 2.0 MPa, MPa 2.5Connection welded end (WE)*Weight, not more, kg 13300
Material of main partsBody steel 09Г2С, zinc chromating 24 μBall steel 20ГЛ, HCP 30 μStem steel 40X, HCP 21 μSeat steel 09Г2С, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 1200 PN 100 with Pneumatic-and-Hydraulic Actuator43
1200
525
18002240
1175
200
3060
1180
1385
1200
3235
Product designation КШ-1200-100-ПГП-HУ-УХЛ1-ПрFigure designation 1.2750.163.104.00-02Diameter Nominal, DN, mm 1200Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pump Control unit electro-pneumatic with unit of limit switchesControl unit voltage, V DC 24,110, 220 Actuator operating medium supply from pipeline Min. control pressure at pressure differential at valve closure member up to 2.0 MPa, MPa 2.5Connection welded end (WE)*Weight, not more, kg 20425
Material of main partsBody steel 09Г2СBall steel 20ГЛ, HCP 30 μStem steel 45XГМА, HCP 21 μSeat steel 09Г2С, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 1200 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation44
30601200
525
18002240
1175
200
2985
1600
1180
4970
1200
Product designation КШ-1200-100-ПГП-ПУ-УХЛ1-ПрFigure designation 1.2750.166.104.00Diameter Nominal, DN, mm 1200Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pump Control unit electro-pneumatic with unit of limit switchesControl unit voltage, V DC 24,110, 220 Actuator operating medium supply from pipeline Min. control pressure at pressure differential at valve closure member up to 2.0 MPa, MPa 2.5Connection welded end (WE)*Weight, not more, kg 21400
Material of main partsBody steel 09Г2СBall steel 20ГЛ, HCP 30 μStem steel 45XГМА, HCP 21 μSeat steel 09Г2С, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Ball valves
Ball valve DN 1400 PN 100 with Pneumatic-and-Hydraulic Actuator45
1800
2380
250
1900
600
3880
1078
2420
200
3555
240
1320
1420
Product designation КШ-1400-100-ПГП-HУ-УХЛ1-ПрFigure designation 1.2750.277.104.00Diameter Nominal, DN, mm 1400Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pump Control unit electro-pneumatic with unit of limit switchesControl unit voltage, V DC 24,110, 220 Actuator operating medium non-aggressive gaseous, supply from pipeline Min. control pressure at pressure differential at valve closure member up to 2.0 MPa, MPa 2.5Connection welded end (WE)*Weight, not more, kg 25314
Material of main partsBody steel 09Г2СBall steel 20ГЛ, HCP 30 μStem steel 30Х Н3 МФА, HCP 21 μSeat steel 09Г2С, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Ball valve DN 1400 PN 100 with Pneumatic-and-Hydraulic Actuator for underground installation46
3555
10782420
2001800
1900
600
5480
24
01600
1320
1420
Product designation КШ-1400-100-ПГП-HУ-УХЛ1-ПрFigure designation 1.2750.277.104.00Diameter Nominal, DN, mm 1400Pressure Nominal, PN, MPa 10.0Actuator type pneumatic-and-hydraulic with manual override – hydraulic pump Control unit electro-pneumatic with unit of limit switchesControl unit voltage, V DC 24,110, 220 Actuator operating medium non-aggressive gaseous, supply from pipeline Min. control pressure at pressure differential at valve closure member up to 2.0 MPa, MPa 2.5Connection welded end (WE)*Weight, not more, kg 25314
Material of main partsBody steel 09Г2СBall steel 20ГЛ, HCP 30 μStem steel 30Х Н3 МФА, HCP 21 μSeat steel 09Г2С, zinc chromating 9 μ
* Pipe is beveled to the pipe specified by a Customer.
Check valves
Designed to automatically prevent back flow of working medium when transmitting non-aggressive natural gas and other non-aggressive media with temperature ramnged -60°C to +80°C.
Tightness – as per GOST 13252.
Connection – welded end (flanged is possible).
Climatic version – for areas with temperate and cold climate (-60°C thru +45°C).
The average service life before overhaul is no more 40 years.
The Company reserves the right to make changes in check valve design to improve it, while minor changes may not be shown in the Catalog.
Design Features:
l Swing type;
l The availability of liquid dampers for DN 300…500 and pneumatic dampers for - DN 700 and over makes possible to reduce impact loads;
l One-piece stamped and welded body design;
l High maintainability
l Low pressure losses.
Check valves DN 300 - 1000 PN 80, 100, 16047
DN 700 PN 80
Pipeline valves
Check valve DN 300 PN 8048
A
A
A - A
841
690
805
Product designation ЗО-300-80-Ф-Ф
Figure designation 1.2770.21.200.00-01
Diameter Nominal, DN, mm 300
Pressure Nominal, PN, MPa 8.0
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)*
Weight, not more, kg 640
Material of main parts steel 10Г2
* Pipe is beveled to the pipe specified by a Customer.
Check valves
Check valve DN 300 PN 10049
440
700
80
780
400
804
465
90
Spherical element Ø570
Product designation ЗО-300-100-Пр
Figure designation 1.2770.56.200.00-01
Diameter Nominal, DN, mm 300
Pressure Nominal, PN, MPa 10.0
Connection welded end (WE)*
Weight, not more, kg 470
Material of main parts steel 09Г2C
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Check valve DN 300 PN 16050
Product designation ЗО-300-160-Пр
Figure designation 1.2770.18.200.00
Diameter Nominal, DN, mm 300
Pressure Nominal, PN, MPa 16.0
Connection welded end (WE)*
Weight, not more, kg 430
Material of main parts steel 09Г2C
steel 10Г2
* Pipe is beveled to the pipe specified by a Customer.
675
440
80
700
46
90
320
Spherical element Ø584
Check valves
Check valve DN 400 PN 10051
930
575
115
Spherical elementØ750
505
850
570
125
990
Product designation ЗО-400-100-Пр
Figure designation 1.2770.57.200.00-01
Diameter Nominal, DN, mm 400
Pressure Nominal, PN, MPa 10.0
Connection welded end (WE)*
Weight, not more, kg 960
Material of main parts steel 09Г2C
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Check valve DN 500 PN 10052
1040
600
140
Spherical element Ø865
510
1020
472
1080
Product designation ЗО-500-100-Пр
Figure designation 1.2770.55.200.00-01
Diameter Nominal, DN, mm 500
Pressure Nominal, PN, MPa 10.0
Connection welded end (WE)*
Weight, not more, kg 1170
Material of main parts steel 09Г2C
* Pipe is beveled to the pipe specified by a Customer.
Check valves
Check valve DN 700 PN 10053
2170
990
135
Spherical element Ø1215
760
1400
755
100
1530
Product designation ЗО-700-100-Пр
Figure designation 1.9000.150.00.00-02
Diameter Nominal, DN, mm 700
Pressure Nominal, PN, MPa 10.0
Connection welded end (WE)*
Weight, not more, kg 3500
Material of main parts steel 09Г2C
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Check valve DN 1000 PN 10054
1960
975
2230
1760
Spherical element Ø1690
Product designation ЗО-1000-100-Пр
Figure designation 1.9000.151.00.00-01
Diameter Nominal, DN, mm 1000
Pressure Nominal, PN, MPa 10.0
Connection welded end (WE)*
Weight, not more, kg 7600
Material of main parts steel 09Г2C
* Pipe is beveled to the pipe specified by a Customer.
Convex strainers
Convex strainers DN 400 - 1000 PN 80, 100, 20055
Designed for protection of compressor flow part when restriction entry.
Working medium - non-aggressive natural gas and other non-aggressive media with temperature ranged -60°C to +80°C.
Connection - Welded end.
Climatic version – for areas with temperate and cold climate (-60°C thru +45°C).
The average service life before overhaul is no more than 40 years.
The Company reserves the right to make changes in convex strainer design to improve it, while minor changes may not be shown in the Catalog.
Design features:
l Minimum hydraulic resistance due to the fact that the perforated area is more than bore cross-section area of the pipeline;
l One-piece stamped and welded body;
l Replacement screen, manhole (from DN 700 and over)
l High maintainability.
DN 700 PN 100
Pipeline valves
Convex strainer DN 400 PN 10056
Product designation РЗ-400-100-Пр
Figure designation 1.2790.163.100.00
Diameter Nominal, DN, mm 400
Pressure Nominal, PN, MPa 10.0
Hydraulic pressure losses at nominal operation conditions, not more, MPa 0.01
Total area of screen holes larger than area of pipeline section
Connection welded end (WE)*
Weight, not more, kg 650
Material of main parts
Body steel 09Г2C
Cover steel 09Г2C
Screen steel 09Г2C
* Pipe is beveled to the pipe specified by a Customer.
360
850
125
47
0
920
Spherical
element Ø
775
Convex strainers
Convex strainer DN 500 PN 10057
1020
472
16
51
0
994
Spherical element Ø865
Product designation РЗ-500-100-Пр
Figure designation 1.2790.125.100.00
Diameter Nominal, DN, mm 500
Pressure Nominal, PN, MPa 10.0
Hydraulic pressure losses at nominal operation conditions, not more, MPa 0.01
Total area of screen holes larger than area of pipeline section
Connection welded end (WE)*
Weight, not more, kg 1020
Material of main parts
Body steel 09Г2C
Cover steel 09Г2C
Screen steel 09Г2C
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Convex strainer DN 500 PN 20058
700
1000580
1092
130
Spherical
element Ø
930
Product designation РЗ-500-200-Пр
Figure designation 1.2790.176.100.00
Diameter Nominal, DN, mm 500
Pressure Nominal, PN, MPa 20.0
Hydraulic pressure losses at nominal operation conditions, not more, MPa 0.01
Total area of screen holes larger than area of pipeline section
Connection welded end (WE)*
Weight, not more, kg 1345
Material of main parts
Body steel 09Г2C
Cover steel 09Г2C
Screen steel 09Г2C
* Pipe is beveled to the pipe specified by a Customer.
Convex strainers
Convex strainer DN 700 PN 10059
1400
760
1430
Spher
ical
elem
ent Ø
1215
Product designation РЗ-700-100-Пр
Figure designation 1.2790.7.100.00-01
Diameter Nominal, DN, mm 700
Pressure Nominal, PN, MPa 10.0
Hydraulic pressure losses at nominal operation conditions, not more, MPa 0.01
Total area of screen holes larger than area of pipeline section
Connection welded end (WE)*
Weight, not more, kg 3100
Material of main parts
Body steel 09Г2C
Cover steel 09Г2C
Screen steel 09Г2C
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Convex strainer DN 1000 PN 10060
1760
976
1855
Spherical
elem
ent Ø1710
Product designation РЗ-1000-100-Пр
Figure designation 1.2790.3.100.00-01
Diameter Nominal, DN, mm 1000
Pressure Nominal, PN, MPa 10.0
Hydraulic pressure losses at nominal operation conditions, not more, MPa 0.01
Total area of screen holes larger than area of pipeline section
Connection welded end (WE)*
Weight, not more, kg 6550
Material of main parts
Body steel 09Г2C
Cover steel 09Г2C
Screen steel 09Г2C
* Pipe is beveled to the pipe specified by a Customer.
Valves to complete manufactured equipment
Valves to complete manufactured equipment61
PJSC “Sumy NPO” is the recognized leader in designing and manufacturing of modular compressor stations for oil, gas and oil refining industry.
Turbo-compressor units with centrifugal compressors as well as reciprocating compressors are the basis of compressor stations.
More than 2300 turbo-compressor units are successfully operated all over the world. The Company constructed and equipped the following complete compressor stations: “Gubkinskaya”, “Yaro-Yakhinskaya” (Russia), “Tarutino” (Ukraine),
“Severnaya”, “Astara” (Azerbaijan), “Goturdepe”, “Yilanly”, “Zapadny Shatlyk”, “Deryalyk” (Turkmenistan), “Kokdumalak”, “Zevardy”, “Gazli” (Uzbekistan), “Bursa”, “Eskisehir” (Turkey), “Hajiabad”, “Abshirin”, “Sirjan” (Iran), Gas Complex Treatment Plants for Gubkinskoe, Severo-Komsomolskoe and Tarasovskoe oil fields of JSC “Rosneft”, etc.
Delivered compressor stations are equipped with valves which are manufactured mainly by our Company.
Pipeline valves
Ball valve DN50 PN16 with Electric Actuator62
4 holes М16
192
103
126
415
78
3
213
Product designation КШ-50-16-ЭП-НУ-УХЛ1-Ф-Ф
Figure designation 1.2750.278.306.00
Diameter Nominal, DN, mm 50
Pressure Nominal, PN, MPa 1.6
Ambient temperature, °C from -20 up to +45
Actuator type electric
Voltage AC 100-240 V
Connection Flanged end, with counter flanges, fasteners and sealing parts (welded end)
Weight without counterparts set, not more, kg 14
Material of main parts
Body steel 10Г2, zinc chromating 12 μ
Ball steel 20X13, HCP 21 μ
Stem steel 14X17H2
Seat (cover) steel 20X13
Valves to complete manufactured equipment
Ball valve DN 65 PN16 with Manual Actuator63
202
154
M164 holes
217 241
140
95
3
Product designation КШ-50-16-P-НУ-УХЛ1-Ф-Ф
Figure designation 1.2750.298.301.00
Diameter Nominal, DN, mm 65
Pressure Nominal, PN, MPa 1.6
Actuator type manual
Connection Flanged end, with counter flanges, fasteners and sealing parts (welded end)
Weight, not more, kg 14
Material of main parts
Body steel 10Г2, zinc chromating 9
Ball steel 20X13, HCP 21
Stem steel 14X17H2
Seat steel 20X13
Pipeline valves
Ball valve DN 65 PN10 with Electric Actuator64
М164 holes
Dтр
*
139
953
170 192
103
433
140
Product designation КШ-65-10-ЭП-НУ-УХЛ1-Ф-Ф
Figure designation 1.2750.279.306.00
Diameter Nominal, DN, mm 65
Pressure Nominal, PN, MPa 1.0
Ambient temperature, °C from -20 up to +45
Actuator type electric
Voltage AC 100-240 V
Connection Flanged end, with counter flanges, fasteners and sealing parts (welded end)
Weight without counterparts set, not more, kg 20
Material of main parts
Body steel 10Г2, zinc chromating 12 μ
Ball steel 20X13, HCP 21 μ
Stem steel 14X17H2
Seat (cover) steel 20X13
Valves to complete manufactured equipment
Ball valve DN 80 PN16 with Electric Actuator65
4 holes M16
Dтр
*
164
209 275
190
270
533
3
112
57
Product designation КШ-80-16-ЭП-НУ-УХЛ1-Ф-Ф
Figure designation 1.2750.260.306.00
Diameter Nominal, DN, mm 80
Pressure Nominal, PN, MPa 1.6
Actuator type electric
Voltage AC 100-240 V
Connection Flanged end, with counter flanges, fasteners and sealing parts (welded end)
Weight without counterparts set, not more, kg 30
Material of main parts
Body steel 20X13
Ball steel 20X13, HCP 21 μ
Stem steel 14X17H2
Seat steel 08X18H10T
Counter flange steel 08X18H10T
Pipeline valves
66 Check valve DN 50 PN 16
2,5
88
140
Product designation ЗО-50-16-Ф-Ф
Figure designation 1.2770.16.100.00-02
Diameter Nominal, DN, mm 50
Pressure Nominal, PN, MPa 1.6
Tightness as per GOST 13252
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)
Weight, not more, kg 9
Material of main parts steel 09Г2C
Valves to complete manufactured equipment
Check valve DN 50 PN 25 67
M6
A A - A
A
40
Product designation ЗО-50-25-Ф
Figure designation 1.2770.16.100.00-01
Diameter Nominal, DN, mm 50
Pressure Nominal, PN, MPa 2.5
Tightness as per GOST 13252
Connection Flanged end
Weight, not more, kg 2.3
Material of main parts steel 09Г2C
Pipeline valves
Check valve DN 50 PN 10068
188
Product designation ЗО-50-100-Ф-Ф
Figure designation 1.2770.23.100.00-01
Diameter Nominal, DN, mm 50
Pressure Nominal, PN, MPa 10.0
Tightness as per GOST 13252
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)*
Weight, not more, kg 14.7
Material of main parts steel 09Г2C
steel 10Г2
* Pipe is beveled to the pipe specified by a Customer.
Valves to complete manufactured equipment
Check valve DN 50 PN 16069
40
M6
A - A
A
A
Product designation ЗО-50-160-Ф
Figure designation 1.2770.34.100.00
Diameter Nominal, DN, mm 50
Pressure Nominal, PN, MPa 16.0
Tightness as per GOST 13252
Connection Flanged end
Weight, not more, kg 2.8
Material of main parts steel 09Г2C
Pipeline valves
Check valve DN 65 PN 2570
M6
A A - A
A
45
Product designation ЗО-65-25-Ф
Figure designation 1.2770.15.100.00-01
Diameter Nominal, DN, mm 65
Pressure Nominal, PN, MPa 2.5
Tightness as per GOST 13252
Connection Flanged end
Weight, not more, kg 3.4
Material of main parts steel 09Г2C
Valves to complete manufactured equipment
Check valve DN 80 PN 2571
M6
A A - A
A
70
Product designation ЗО-80-25-Ф
Figure designation 1.2770.14.100.00-01
Diameter Nominal, DN, mm 80
Pressure Nominal, PN, MPa 2.5
Tightness as per GOST 13252
Connection Flanged end
Weight, not more, kg 6
Material of main parts steel 09Г2C
Pipeline valves
Check valve DN 80 PN 4072
180
Product designation ЗО-80-40-Ф-Ф
Figure designation 1.2770.14.100.00-02
Diameter Nominal, DN, mm 80
Pressure Nominal, PN, MPa 4.0
Tightness as per GOST 13252
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)*
Weight, not more, kg 17
Material of main parts steel 09Г2C
steel 10Г2
* Pipe is beveled to the pipe specified by a Customer.
Valves to complete manufactured equipment
Check valve DN 80 PN 10073
240
Product designation ЗО-80-100-Ф-Ф
Figure designation 1.2770.49.100.00-04
Diameter Nominal, DN, mm 80
Pressure Nominal, PN, MPa 10.0
Tightness as per GOST 13252
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)*
Weight, not more, kg 33
Material of main parts steel 09Г2C
steel 10Г2
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Check valve DN 100 PN 2574
M6
A A - A
A
50
Product designation ЗО-100-25-Ф
Figure designation 1.2770.141.100.00
Diameter Nominal, DN, mm 100
Pressure Nominal, PN, MPa 2.5
Tightness as per GOST 13252
Connection Flanged end
Weight, not more, kg 6.0
Material of main parts steel 10Г2
Valves to complete manufactured equipment
Check valve DN 100 PN 10075
267
Product designation ЗО-100-100-Ф-Ф
Figure designation 1.2770.33.100.00
Diameter Nominal, DN, mm 100
Pressure Nominal, PN, MPa 10.0
Tightness as per GOST 13252
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)*
Weight, not more, kg 50
Material of main parts steel 10Г2
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Check valve DN 150 PN 6376
292
Product designation ЗО-150-63-Ф-Ф
Figure designation 1.2770.47.100.00-03
Diameter Nominal, DN, mm 150
Pressure Nominal, PN, MPa 6.3
Tightness as per GOST 13252
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)*
Weight, not more, kg 86
Material of main parts steel 09Г2C
steel 10Г2
* Pipe is beveled to the pipe specified by a Customer.
Valves to complete manufactured equipment
Check valve DN 150 PN 16077
340
Product designation ЗО-150-160-Ф-Ф
Figure designation 1.2770.12.100.00
Diameter Nominal, DN, mm 150
Pressure Nominal, PN, MPa 16.0
Tightness as per GOST 13252
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)*
Weight, (with mounting parts)
not more, kg 110
Material of main parts steel 09Г2C
steel 10Г2
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Check valve DN 200 PN 10078
365
Product designation ЗО-200-100-Ф-Ф
Figure designation 1.2770.59.100.00-02
Diameter Nominal, DN, mm 200
Pressure Nominal, PN, MPa 10.0
Tightness as per GOST 13252
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)*
Weight, not more, kg 170
Material of main parts steel 09Г2C
steel 10Г2
* Pipe is beveled to the pipe specified by a Customer.
Valves to complete manufactured equipment
Check valve DN 200 PN 16079
375
438
Product designation ЗО-200-160-Ф-Ф
Figure designation 1.2770.17.100.00
Diameter Nominal, DN, mm 200
Pressure Nominal, PN, MPa 16.0
Tightness as per GOST 13252
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)*
Weight, not more, kg 184
Material of main parts steel 09Г2C
steel 10Г2
steel 20X13
* Pipe is beveled to the pipe specified by a Customer.
Valves to complete manufactured equipment
Check valve DN 300 PN 10081
456
Product designation ЗО-300-100-Ф-Ф
Figure designation 1.2770.45.100.00-01
Diameter Nominal, DN, mm 300
Pressure Nominal, PN, MPa 10.0
Tightness as per GOST 13252
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)*
Weight, (with mounting parts) not more, kg 358
Material of main parts steel 09Г2C
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Check valve DN 300 PN 6380
336
Product designation ЗО-300-63-Ф-Ф
Figure designation 1.2770.45.100.00
Diameter Nominal, DN, mm 300
Pressure Nominal, PN, MPa 6.3
Tightness as per GOST 13252
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)*
Weight, (with mounting parts) not more, kg 232
Material of main parts steel 09Г2C
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
Check valve DN 400 PN 6382
436
Product designation ЗО-400-63-Ф-Ф
Figure designation 1.2770.48.100.00-04
Diameter Nominal, DN, mm 400
Pressure Nominal, PN, MPa 6.3
Tightness as per GOST 13252
Connection Flanged end, with counter flanges, fasteners and sealing parts (WE)*
Weight, (with mounting parts) not more, kg 565
Material of main parts steel 09Г2C
* Pipe is beveled to the pipe specified by a Customer.
Valves to complete manufactured equipment
Convex strainer DN 200 PN 10083
640
M240x6
Spherica
l ele
ment
Ø404
Product designation РЗ-200-100-Л
Figure designation 1.2790.65.100.00
Diameter Nominal, DN, mm 200
Pressure Nominal, PN, MPa 10.0
Hydraulic pressure losses at nominal operation conditions, not more, MPa 0.03
Connection lens acc. to National Standard GOST 9400
Weight, not more, kg 150
Material of main parts
Body steel 09Г2C
Connection pipe steel 09Г2C
Screen steel 09Г2C
Pipeline valves
84 Wedge gate valve DN 50 PN 16
180
Ø160 Ø125
Ø184 holes
10
5
173
445
250
Ø100
Ø50
Product designation ЗKЛ-50-16-УХЛ1
Figure designation 1.9000-468.08-00М
Diameter Nominal, DN, mm 50
Pressure Nominal, PN, МPа 1.6
Fluid non-aggressive liquid or gas-like
Fluid temperature, °С up to plus 425
Actuator type manual
Connection flanged
Weight, not more, kg 30
Material of main parts
Body steel 20ГЛ
Cover steel 20ГЛ
Stem steel 14Х17Н2
Wedge steel 09Г2С-6
Seal pass-through tamping of АГИ6х6
Valves to complete manufactured equipment
85 Wedge gate valve DN 80 PN 16
210
Ø195 Ø160
Ø184 holes
20 3
530
250
Ø135
Ø8
0
Product designation ЗKЛ-80-16-УХЛ1
Figure designation 1.9000-469.01-00М
Diameter Nominal, DN, mm 80
Pressure Nominal, PN, MPa 1.6
Fluid non-aggressive liquid or gas-like
Fluid temperature, °С up to plus 425
Actuator type manual
Connection flanged
Weight, not more, kg 36
Material of main parts
Body steel 20ГЛ
Cover steel 20ГЛ
Stem steel 14Х17Н2
Wedge steel 09Г2С-6
Seal pass-through tamping of АГИ6х6
Pipeline valves
86 Wedge gate valve DN 100 PN 16
230
Ø2
15 Ø
180
Ø188 holes
20 3
650..
.745
Ø240
Ø158
Ø10
0
Product designation ЗKЛ-100-16-УХЛ1
Figure designation 1.2790.84.000.00-06
Diameter Nominal, DN, mm 100
Pressure Nominal, PN, MPa 1.6
Fluid non-aggressive liquid or gas-like
Fluid temperature, °С up to plus 425
Actuator type manual
Connection flanged
Weight, not more, kg 65
Material of main parts
Body steel 20ГЛ
Cover steel 20ГЛ
Stem steel 14Х17Н2
Wedge steel 09Г2С
Seal pass-through tamping of АГИ6х6
Valves to complete manufactured equipment
87 Wedge gate valve DN 150 PN 16
280
Ø24
0Ø23
8 holes
21
3
83
0..
.98
5
Ø400
Ø15
0
Product designation ЗKЛ-150-16-УХЛ1
Figure designation 1.2790.84.000.00-07
Diameter Nominal, DN, mm 150
Pressure Nominal, PN, MPa 1.6
Fluid non-aggressive liquid or gas-like
Fluid temperature, °С up to plus 425
Actuator type manual
Connection flanged
Weight, not more, kg 105
Material of main parts
Body steel 20ГЛ
Cover steel 20ГЛ
Stem steel 14Х17Н2
Wedge steel 09Г2С
Seal pass-through tamping of АГИ6х6
Pipeline valves
88 Shut-off control valve DN 15 PN 250 Kv0.1
77
Ø12
Ø18300..
.310
158
Ø18
10
1
Ø12
Product designation KЗР-15-250-УХЛ1
Figure designation 1.2790.251.000.00
Diameter Nominal, DN, mm 15
Pressure Nominal, PN, MPa 25.0
Fluid non-aggressive liquid or gas-like
Fluid temperature, °С minus 60 through plus 4253Kv, m /h 0.1
Actuator type manual
Connection b all-nipple
Weight, not more, kg 3.0
Material of main parts
Body steel 40Х + Ц9хр
Nozzle steel 40Х + Ц9хр
Stem steel 14Х17Н2
Rod steel 12Х13
Valves to complete manufactured equipment
89 Shut-off control valve DN 25 PN 100 Kv8
159
Ø135
Ø100Ø18
4 holes200
3
411
160Ø
58
Product designation KЗР-25-100-УХЛ1
Figure designation 1.2790.222.000.00
Diameter Nominal, DN, mm 25
Pressure Nominal, PN, MPa 10.0
Fluid non-aggressive liquid or gas-like
Fluid temperature, °С up to plus 1203Kv, m /h 8.0
Actuator type manual
Connection flanged with mating flanges*
Weight without the mating parts set,not more, kg 16
Weight with the mating parts set,not more, kg 23
Material of main parts
Body steel 09Г2С + Ц9хр
Upper nozzle steel 14Х17Н2
Nozzle steel 20Х13
Nozzle seal fluoroplast Ф4К20
Counter flange steel 09Г2С
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
90Shut-off control valve DN 25 PN 160 Kv8 with Manual Actuator
163
Ø135
Ø100Ø18
4 holes200
6,5
411
160Ø
50
Product designation KЗР-25-160-УХЛ1
Figure designation 1.2790.242.000.00
Diameter Nominal, DN, mm 25
Pressure Nominal, PN, MPa 16.0
Fluid non-aggressive gas-like
Fluid temperature, °С up to plus 1203Kv, m /h 8.0
Actuator type manual
Connection flanged with mating flanges*
Weight without the mating parts set,not more, kg 16.5
Weight with the mating parts set,not more, kg 23.0
Material of main parts
Body steel 09Г2С + Ц9хр
Upper nozzle steel 14Х17Н2
Nozzle steel 20Х13
Nozzle seal fluoroplast Ф4К20
Counter flange steel 09Г2С
* Pipe is beveled to the pipe specified by a Customer.
Valves to complete manufactured equipment
91Shut-off control valve DN 40 PN 100 Kv32with Manual Actuator
183
Ø16
5
Ø125Ø224 holes
225
3
512
186
Ø76
А
А285
Product designation KЗР-40-100-УХЛ1
Figure designation 1.2790.223.000.00-02
Diameter Nominal, DN, mm 40
Pressure Nominal, PN, MPa 10.0
Fluid non-aggressive liquid
Fluid temperature, °С up to plus 1203Kv, m /h 32.0
Actuator type manual
Connection flanged with mating flanges*
Weight without the mating parts set,not more, kg 26
Weight with the mating parts set,not more, kg 38
Material of main parts
Body steel 09Г2С + Ц9хр
Upper nozzle steel 14Х17Н2
Nozzle steel 20Х13
Nozzle seal fluoroplast Ф4К20
Counter flange steel 09Г2С
* Pipe is beveled to the pipe specified by a Customer.
Pipeline valves
92Shut-off control valve DN 40 PN 160 Kv32with Manual Actuator
188
Ø16
5
Ø125
Ø224 holes
225
512
186
А
285
Product designation KЗР-40-160-УХЛ1
Figure designation 1.2790.243.000.00-02
Diameter Nominal, DN, mm 40
Pressure Nominal, PN, MPa 16.0
Fluid non-aggressive liquid or gas-like
Fluid temperature, °С up to plus 1203Kv, m /h 32.0
Actuator type manual
Connection flanged with mating flanges*
Weight without the mating parts set,not more, kg 26
Weight with the mating parts set,not more, kg 38
Material of main parts
Body steel 09Г2С + Ц9хр
Upper nozzle steel 14Х17Н2
Nozzle steel 20Х13
Nozzle seal fluoroplast Ф4К20
Counter flange steel 09Г2С
* Pipe is beveled to the pipe specified by a Customer.
А
Valves to complete manufactured equipment
93 Shut-off control valve DN 65 PN 63
244
Ø160 Ø228 holes
340
620
25
Ø200
Ø400
3
3
135
90
Ø65
Product designation KЗР-65-63-УХЛ1
Figure designation 1.2790.255.000.00
Diameter Nominal, DN, mm 65
Pressure Nominal, PN, MPa 6.3
Fluid non-aggressive liquid or gas-like
Fluid temperature, °С up to plus 3503Kv, m /h 80
Actuator type manual
Connection flanged with mating flanges*
Weight without the mating parts set,not more, kg 72
Weight with the mating parts set,not more, kg 91
Material of main parts
Body steel 09Г2С + Ц9хр
Nozzle steel 20Х13
Nozzle seal tamping АФТ 6х6
Counter flange steel 09Г2С
* Pipe is beveled to the pipe specified by a Customer.
Data Sheet for Ball Valve
Data Sheet for Ball Valve94
PJSC “Sumy NPO” BALL VALVE page 1 from 2
Specification No. Data Sheet No.
Date: 20_____._____._____ Customer -
Теl: +38 0542 77-32-29; 24-37-75 Designer - PJSC «Sumy NPO»
Fax: +38 0542 77-32-28; 22-55-32 Object -
1 Designation
Drawing No.
2 Quantity Pcs.
3 Diameter Nominal DN, mm
4 Pressure Nominal PN, bar
5 Pipeline diameter Outside (mm)
6 Pipe wall thickness mm
7 Pipe material Steel grade, Standard
8 Pup carbon equivalent [С]e,no more
9 Pipeline position horizontal / vertical
10 Installation Above-ground / under-ground
11 Depth from ground surface to pipe top (for underground installation)
mm
12 Connection Welded end / flanged
13 Counter-flanges yes / no
14 Working medium
15 Aggressive components of working medium mg/m3, no more
16 Mechanical impurities in working medium g/m3, no more
17 Working medium temperature °С
18 Ambient temperature °С
19 Working pressure bar
20 Max. pressure differential bar
21 Max. pressure differential under operation bar
22 Ball valve body type welded / split
23 Tightness Bi-directional / uni-directional
24 Tightness grade
А, В, С, D as per GOST 9544.2005
or ISO 5208
1, 2, 3 as per GOST 9544-75
25 Seat seal elastomeric / metal-to-metal
26 Ball valve control type local / remote / local + remote
27 Actuator type manual / electric / electro-hydraulic / pneumatic / pneumatic-and-hydraulic
28 Type of operating medium (for pneumatic and pneumatic-and-hydraulic actuators)
From the pipe / from a separate source (power gas)
29 Power gas pressure bar
30 Manual override yes / no
31 Limit switch yes / no
Pipeline valves
Data Sheet for Ball Valve95
BALL VALVE
Specification No. Data Sheet No.
Date: 20_____._____._____ Customer -
Теl: +38 0542 77-32-29; 24-37-75
Fax: +38 0542 77-32-28; 22-55-32 Object -
32 Nominal voltage of control unit 24 / 110 / 220V AC/ DC
33 Nominal voltage of limit switches 24 / 110 / 220V AC/DC
34 Motor power voltage (for electric and electro-hydraulic actuators)
24 / 110 / 220 / 380 V
AC / DC
35 Valve emergency shut off automatic device (Manufacturer)
yes / no
36 Protective covering type Over-ground part: polymer / paint
Under-ground part: polymer / paint
37 Coloration color
38 Additional data:
Name Signature / Date Tel. / Fax
Designed
Approved
When ordering, please specify product and drawing designation.
The example of an order: КШ-1000-100-ПГП-ПУ-УХЛ1-Пр, voltage 24 V; 1.2750.150.104.00-02whereКШ - ball valve;1000 - Diameter Nominal, DN, mm;100 - Pressure Nominal, PN, bar;ПГП - Pneumatic-and-Hydraulic Actuator (Р - Manual Actuator; РП - Manual Mechanical Actuator; ПП - Pneumatic Actuator; ПГП - Pneumatic-and-Hydraulic Actuator; ЭП - Electric Actuator);ПУ - under-ground installation; (НУ - over-ground installation; ПУ - under-ground installation);УХЛ1 - for areas with temperate and cold climate (temperature range -60°C - +45°C) (У1 - for districts with temperate climate; ХЛ1 - for districts with cold climate);Пр - welded end connection (Ф-Ф - flanged connection with counter flanges, fasteners and sealing parts Пр - welded end); Control unit - 24 V (24,110, 220 V); 1.2750.150.104.00-02 - drawing designation.
When ordering, please specify dimensions, material and mechanical properties of connecting pipe.
page 2 from 2PJSC “Sumy NPO”
Designer - PJSC «Sumy NPO»
Data Sheet for Check Valve
Data Sheet for Check Valve96
When ordering, please specify product and drawing designation.The example of an order: ЗО-300-100-Пр; 1.2770.56.200.00-01.where3О - check valve;300 - Diameter Nominal, DN, mm;100 - Pressure Nominal, PN, bar;Пр - welded end (Ф-Ф - flanged connection with counter flanges, fasteners and sealing parts Пр – welded end;);1.2770.56.200.00-01 - drawing designation.
When ordering, please specify dimensions, material and mechanical properties of connecting pipe.
CHECK VALVE page 1 from 1
Specification No. Data Sheet No.
Date: 20_____._____._____ Customer -
Теl: +38 0542 77-32-29; 24-37-75
Fax: +38 0542 77-32-28; 22-55-32 Object -
1 Designation
Drawing No.
2 Quantity Pcs.
3 Nominal diameter DN, mm
4 Nominal pressure PN, bar
5 Pipeline diameter Outside (mm)
6 Pipe wall thickness mm
7 Pipe material Steel grade, Standard
8 Pup carbon equivalent [С]e, no more
9 Pipeline position Horizontal /
10 Installation Over-ground / under-ground
11 Connection Welded end / flanged end
12 Counter-flanges yes / no
13 Working medium
14 Aggressive components of working medium mg/m3, no more
15 Mechanical impurities in working medium g/m3, no more
16 Working medium temperature °С
17 Ambient temperature °С
18 Work pressure bar
19 Max. pressure differential bar
20 Working medium velocity (flow rate) m/sec (nm3/min)
21 Type swing
22 Body type welded / split
23 Damper availability yes / no
24 Protective covering type polymer / paint
25 Coloration color
26 Additional data:
Name Signature / Date Tel. / Fax
Designed
Approved
PJSC “Sumy NPO”
Designer - PJSC «Sumy NPO»
Pipeline valves
Data Sheet for Convex Strainer97
When ordering, please specify product and drawing designation.
The example of an order: РЗ-400-100-Пр; 1.2790.163.100.00.whereРЗ - convex strainer;400 - Diameter Nominal, DN, mm;100 - Pressure Nominal, PN, bar;Пр - welded end (Пр – welded end; Л – lens connection (acc. to National Standard GOST 9400)); 1.2790.163.100.00 - drawing designation.
When ordering, please specify dimensions, material and mechanical properties of connecting pipe.
CONVEX STRAINER page 1 from 1
Specification No. Data Sheet No.
Date: 20_____._____._____ Customer -
Теl: +38 0542 77-32-29; 24-37-75
Fax: +38 0542 77-32-28; 22-55-32 Object -
1 Designation
Drawing No.
2 Quantity Pcs.
3 Diameter Nominal DN, mm
4 Pressure Nominal PN, МPа
5 Pipeline diameter Outside, mm
6 Pipe wall thickness mm
7 Pipe material Steel grade, ,
8 Working pressure МPа
9 Pipeline position Horizontal /
10 Installation Over-ground / under-ground
11 Connection Welded end
12 Working medium
13 Aggressive components of working medium % the volume
14 Working medium velocity m/sec min, nom, max
15 Working medium temperature °С
16 Ambient temperature °С
17 Max. pressure differential МPа
18 Pressure losses at nominal conditions МPа
19 Material
20 Protective covering type polymer / paint
21 Coloration color
22 Additional data:
Name Signature / Date Tel. / Fax
Designed
Approved
PJSC “Sumy NPO”
Designer - PJSC «Sumy NPO»
List of Specifications for Valves Given in the Catalog
1. ТУ 26-07-1346-84 Check valve DN 700
2. ТУ 26-07-1391-86 Check valve DN 1000
3. ТУ УЗ.20-05747991-026-95 Check valves for gas industry
4. ТУ УЗ.20-05747991-032-96 Convex strainers
5. ТУ 26-07-1365-85 Ball valves DN 500 with mechanical actuator
6. ТУ 26-07-1419-87 Ball valves DN 500 with pneumatic-and-hydraulic actuator
7. ТУ УЗ.20-05747991-025-95 Ball valves DN 300, 400 with manual and pneumatic-and-hydraulic actuators
8. ТУ УЗ.20-05747991-037-97 Ball valves DN 700 with manual and pneumatic-and-hydraulic actuators
9. ТУ УЗ.88-05747991-003-99 Spherical valves for gas industry
98
Pipeline valves
Certificates and Approvals
Certificates and Approvals99
Certificates of compliance:
- Certificate of quality management system compliance with ISO 9001:2008 standard;
- Certificate of compliance of industrial health and safety management system with OHSAS 18001-2007 standard;
- Certificate of compliance of environmental protection management system with ISО 14001-2004 standard.
- Certificates of compliance with technical regulations of the Russian Federation on the products manufactured according to TU:
- ball valves DN 50÷200;
- ball valves DN 300÷1400; РN 80÷100;
- back flow valves DN 150÷1000;
- strainers DN 300÷1000;
- Certificates of compliance in UkrSEPRO certification system with technical regulations of Ukraine:
- ball valves DN 300÷700;
- ball valves DN 1000÷1400.
Permits for application:
- Permit for the right to manufacture and use technical devices on “Gospromnadzor”-supervised facilities in the Republic of Belarus.
Certificates of compliance:
- Certificate of quality management system compliance with ISO 9001:2008 standard;
- Certificate of compliance of industrial health and safety management system with OHSAS 18001-2007 standard;
- Certificate of compliance of environmental protection management system with 1БО 14001-2004 standard.
- certificates of compliance for deliverables in the GOST R certification system:
- ball valves DN 50÷200;
- ball valves DN 300÷1400; РN 80÷100;
- back flow valves DN 150÷1000;
- strainers DN 300÷1000;
- certificates of compliance in UkrSEPRO certification system:
- ball valves DN 300÷700;
- ball valves DN 1000÷1400.
Permits for application:
- permits for application of deliverables in RF:
- ball valves DN 1000÷1400 and back flow valves DN 300÷1000;
- ball valves DN 300÷700;
- permit for the right to manufacture and use technical devices on “Gospromnadzor”-supervised facilities in the Republic of Belarus.