1-Phase Simplex Control Panel

Dewatering | environmental | muniCiPal | reSiDentialG&G ControlsA Division of Stancor, L.P.

1-Phase simPlex Control PanelinCorPorating automation to imProve reliability and system effiCienCiesg&g Controls standard Simplex pump controls, also sold as Stancor CB1000 (1-phase), provide the base for additional customization. Simplex controls provide dependable, automatic operation of a single pump. optional features can be added to the standard package to create a unique solution for individual needs.

Newfound efficiencies, impacting both energy consumption and costs, can result from using controls to automate operations. g&g Controls helps you capture savings by providing the best of both worlds—large enough to leverage global experience and small enough to offer local service and support.

aPPliCationsSimplex controls panels are used in a variety of applications, including construction, irrigation systems, lift stations, mining and utilities. the core design, and accompanying features, are intended to be robust enough for general purpose. Customization from this base design can then occur for specialty applications.

featuresstandard ComPonents1 14 x 12 x 7 nema 4X

polycarbonate enclosure2 ieC motor contactor3 mCCB for short circuit4 Hoa (Hand/off/auto) switches5 green pump run indicator lights6 alarm/Control CB7 ground lugs8 Float switch terminal block angled

for ease of field installation9 input power terminal block angled

for ease of field installation

standard alarm PaCkage10 High alarm relay for dry contacts11 indicator light for visual check12 Sonalert audible alarm13 exterior alarm test with silence14 Horn silence relay

additional oPtions• Mechanical float switches

with 20-, 40- or 60-foot cords• Dry contacts for remote

alarm signal• a variety of enclosure materials,

including stainless steel, depending on the application

• individual overloads available

Dimensions: 14 wide / 12 tall / 7 deep

front Cover interior ComPonents

more than three decades designing and building customized controls are incorporated to every panel and provide the basis for consultation into design modifications. Projects benefit from an extensive knowledge of code and certification for both UL 508A and UL 698A. The vast knowledge base resulting from its experience allows g&g Controls to find the right options—every time.

neC full-load Currents in amPeresHP 115 Volts 208 Volts 230 Volts 0.25 5.8 3.2 2.90.50 9.8 5.4 4.90.75 13.8 7.6 6.91.00 16.0 8.8 8.01.50 11.0 10.02.00 13.2 12.0

www.stanCorPumPs.Com | 203.268.7513G&G ControlsA Division of Stancor, L.P. © copyright 2017 Stancor, l.P.

HAND OFF AUTO TEST SILENCEPUMP HIGH LEVEL

12

1 14 10

8 9

6

4 5 11 13

3

2

7