1 AND - · PDF file1 AND 2 • ServoMaster Series 1 The ServoMaster Series 1 servo roll feeds provide the speed, precision, and power for high speed and light gauge stamping

1 AND 2

• ServoMaster Series 1

The ServoMaster Series 1 servo roll feeds providethe speed, precision, and power for high speed andlight gauge stamping applications. With 2.25"diameter feed rolls, material thickness from .010"

to .187" can be processed depending on the material width and speed requirements. Starting with theSM-1 06, with 6" wide feed rolls, through the SM-130, with 30" wide feed rolls, material widths from 1"

to 30" can be processed. Extensive standard features and optional equipment position these servoroll feeds to meet a wide range of applications.These feeds offer modular design and constructionas the basis for their competitive market price.Rugged and precise construction and exceptionalcomponent quality are combined to provide the"best value in the industry". All Coe Press Equipment products are backed up by our "3-2-1" Warranty and 24 Hour Technical Service programs .


The ServoMaster Series 2 servo roll feeds providethe speed, precision, and power for high speed andmedium gauge stamping applications. With 2.65"diameter feed rolls, material thickness from .010" to

.210" can be processed depending on the materialwidth and speed requirements. Starting with theSM-2 06, with 6" wide feed rolls, through the SM-230, with 30" wide feed rolls, material widths from 1"

to 30" can be processed. Extensive standard features and optional equipment position these servoroll feeds to meet a wide range of applications.These feeds offer modular design and constructionas the basis for their competitive market price.Rugged and precise construction and exceptionalcomponent quality are combined to provide the"best value in the industry". All Coe Press Equipment products are backed up by our "3-2-1"Warranty and 24 Hour Technical Service programs.

Note: Optional Adjustable Height Mounting Bracket shown on Series 2.

1

SERvoMASTER SERIES 1Machine Specifications MODEL

SM-106SM-112SM-118SM-124SM-130Maximum Material Width

6.0"12.0"18.0"24.0"30.0"

Thickness at Full Width

.166".125".090".060".045"

Thickness at Half Width

.187".156".125".090".060"

Maximum Velocity (FPM)

295295295295295

Maximum Acceleration (FPS')

110100908070

Standard Drive Ratio

3.0:13.0:13.0:13.0:13.0:1

Performance Specifications MODEL

SM-106SM-112SM-118SM-124SM-130Max. Thickness

.156".125".090".060".045"@FullWidth

x6.0"x12.0"x18.0"x24.0"x30.0"

- With 180·/240· Press Angle 2" Progression

226/301220/2932131284205/273197/262

6" Progression

149/198146/1941421189137/183132/176

12" Progression

99113297/13096112894/12591/122

24" Progression

59/7959178581775717656175

SERVO MASTER SERIES2Machine Specifications MODEL

SM-206SM-212SM-218SM-224SM-230Maximum Material Width

6.0"12.0"18.0"24.0"30.0"


.187".156".125".090".060"


.210".187".156".125".090"


340340340340340


9080706060


3.0:13.0:13.0:13.0:13.0:1

Performance Specifications MODEL

SM-206SM-212SM-218SM-224SM-230Max. Thickness

.187".156".125".090".060"

@FullWidth

x6.0"x12.0"x18.0"x 24.0"x30.0"


213128420512731971262187/249187/249

6" Progression

146/194140/187134/178126/168126/168

12" Progression

102113699/13396/12892/12392/123

24" Progression

64/8563/8462/8260/8060/80

2

3 AND 4


The ServoMaster Series 3 servo roll feeds providethe speed, precision, and power for medium andheavy gauge stamping applications. With 3.0"diameter feed rolls, material thickness from .010" to "

,250" can be processed depending on the materialwidth and speed requirements. Starting with theSM-3 12, with 12" wide feed rolls, through theSM-3 42, with 42" wide feed rolls, material widths

from 1" to 42" can be processed. Extensive stan-dard features and optional equipment positionthese servo roll feeds to meet a wide range ofapplications. These feeds offer modular design andconstruction as the basis for their competitive market price. Rugged and precise construction andexceptional component quality are combined toprovide the "best value in the industry", All CoePress Equipment products are backed by our"3-2-1" Warranty and 24 Hour Technical Serviceprograms .


The ServoMaster Series 4 servo roll feeds providethe speed, precision, and power for medium andheavy gauge stamping applications. With 4.0" diameter feed rolls, material thickness from .010" to

.310" can be processed depending on the materialwidth and speed requirements. Starting with theSM-4 12, with 12" wide feed rolls, through the SM4 42, with 42" wide feed rolls, material widths from

1" to 42" can be processed. Extensive standardfeatures and optional equipment position theseservo roll feeds to meet a wide range of applications. These feeds offer modular design and construction as the basis for their competitive marketprice. Rugged and precise construction and exceptional component quality are combined to providethe "best value in the industry". All Coe PressEquipment products are backed by our"3-2-1" Warranty and 24 Hour Technical Serviceprograms.

Note: Optional Edge Guide Assemblies are shown on Series 3 and Series 4 roll feeds.

Optional Adjustable Height Mounting Bracket shown on Series 4 roll feed,

3

SERvoMASTER SERIES3Machine Specifications MODEL

SM-312SM-318SM-324SM-330SM-336SM-342Maximum Material Width

12.0"18.0"24.0"30.0"36.0"42.0"


.210".187".156".125".090".060"


.250".210".187".156".125".090"


365365365365365365


908070606060


3.2:13.2:13.2:13.2:13.2:13.2:1

Performance SpecificationsMODEL

SM-312SM-318SM-324SM-330SM-336SM-342Maximum Thickness

.210".187".156".125".090".060"

@FullWidth

x12.0"x18.0"x24.0"x30.0"x36.0"x42.0"


2131284205/273197126218712491871249187/249

6" Progression

147/195141/188134/179126/168126/168126/168

12" Progression

105/140102/13698113194/12594/12594/125

24" Progression

67/8965/8764/8562/8362/8362/83

SERvoMASTER SERIES4Machine Specifications MODEL

SM-412SM-418SM-424SM-430SM-436SM-442Maximum Material Width

12.0"18.0"24.0"30.0"36.0"42.0"


.250".210".187".156".125".090"


.310".250".210".187".156".125"


365365365365365365


908070606060


3.2:13.2:13.2:13.2:13.2:13.2:1


SM-412SM-418SM-424SM-430SM-436SM-442Maximum Thickness

.250".210".187".156".125".090"

@FullWidth

x12.0"x18.0"x24.0"x30.0"x36.0"x42.0"


21312842051273197126218712491871249187/249

6" Progression

147/195141/188134/179126/168126/168126/168

12" Progression

105/140102/13698113194/12594/12594/125

24" Progression

67/8965/8764/8562/8362/8362/83

4

NEFITS

: .. · .. ·1

I

....

• Sealed PrecisionRoller Bearings

, i................. , ··· .. 1

....: ·, f ..·1~~ ···· [ .. ·•·· .. 1

~W; j, I

I....•.. j

'j' ..··..1: IT'l,. i

:.]I. I

•..,.....!; !

W: I

,· .. ··1

.. I

• MachineLift Rings

: :

II

0:

,' .." ... .,." ...~I,

;;

,,

I '.........

• •

, , I

: : ;

. ,:

. '.

[ • SloUed Press Mount Plate for PreciseAlignment and Height Adjustment

r ..

... I.:.....j•...

• True Pivoting Upper Feed Rollto Assure Full Gear Mesh

\'... ,.,. --,'. , ~.."... .. ".

\

: . ". 'T; ....~... '; .... '; . r .

<e' '", •••• ,;, ••••••• :"" ~•• _, •••. ,., ••••,

;

:

.

' .....

.............

:

.

...

[ • Air Pressure Regulator forExact Feed Roll Pressure 1\;

• ,j ~ ...-..

I ' ..· "...... .,::lj.J: "'.,/ .\ ~.; : : I : ;: ...

• Hand Crank Entrance -- j .. i'·--(· \.., (' ..,; c •

Edge Guides- Optional _ . .; :,c. ~: .• ~~......,.

, [~ T'-

• Rigid Tie Bar Constructionfor Precise Assembly

[',:.'.....·~:::':~~~~~:~'Ll',..'..I·· · ·············1 .

Note: Optional Edge Guide Assembly shown.

5

,

• Center Mounted Adjustable

,

Stroke Air Cylinderi

,,,"," ,;/ i""", ;I ,

i• Funnelled Stock Path for /Material Threading and• Air Operated High Speed Pilot""',',

Operator Safety IPin Release Mechanism/

""'"

\ ...--i--/ -,--.-

i\ ...--

\v

\• Catenary Section Assures J"\

jProper Material Support

,'\-

II

~ ,-

~.~I

I,:

-/<;%'

ii"

~i{

I:.......... ....•..••..• High Performance Maintenance

Free AC Brushless Servo Motorp,

"""

....•.••.

"'"i\......•

"'"

\.• Low Inertia Drive System Providesb

I\

Accuracy and Efficiency/"• Upper and Lower Feed Rolls with \#3 Crodon Chrome Finish \.l

\• Serial Communications Capability

to Press or Host Devices:

;

"",

6

OPTIONAL EQUIPMENT

..,• Heavy Duty Cabinet Base With

+/- 4" of Height AdjustmentThe free standing cabinet base fully supports the rollfeed while allowing the operator to easily adjust formaterial width and passline height. Changing thepassline is a one man job without the use of auxiliarysupport equipment such as a fork truck or crane. Anadjustment range of +/- 4" from the nominal passlineheight is provided on the standard cabinet base. Two (2)precision screw jacks and two (2) guide bar assembliesprovide the cabinet base with an accurate and ruggedmethod of height adjustment. A unique guiding mechanism of anti-friction plates and springs eliminates theneed to loosen and re-tighten any press mount bolts tomake passline height changes .

• Adjustable Height Mounting BracketThis bracket is combined with the standard Slotted Press

Mount Plate to provide a fast and repeatable method ofpassline adjustment. The two (2) precision ground platesmaintain roll feed squareness to the press and tooling atvarious passline height settings. The height adjustment isaccomplished by simply turning the handle of the jackmechanism built into the base of the bracket. A uniqueguiding mechanism of anti-friction plates and springseliminates the need to loosen and re-tighten any pressmount bolts to make passline height changes. An adjustment range of +/-3" from the nominal passline is provided.

7

• Motorized Passline Adjustment

When combined with the Heavy Duty Cabinet Base, this featureallows the operator to easily raise and lower the roll

feed to suit the requirements of a specific dieset. The passline height is raised or lowered

• 4fJ by use of a selector switch mounted on" •• ~, the roll feed junction box.

• Pull Through Straighteners

A wide range of pull through straighteners can be integrated with the ServoMaster Series roll feeds. Attacheddirectly behind the roll feed, the pull through straightener is designed to remove coil set as the material is

advanced by the roll feed. Individual adjustment of the upperrolls allows the operator to effectively work the material to

remove coil set. Optional powered threading drives can beselected for ease of threading the strip through the straightenerand into the roll feed.

• Hand Crank Entrance Edge Guides

Accurate material alignment to the press tooling is provided. Guides are normally located at the entrance sideof the servo roll feed. These vertical material guides areadjusted by crank handles located on the operator's sideof the servo roll feed for operator convenience. Theseunits come with a self-centering feature and hardenedguide rolls for lifetime durability.

• Dual Hand Crank Edge Guides withSelf-Centering & Independent Adjustment

Using hardened vertical guide rolls in a heavy-dutyguide bar and screw arrangement, this assembly provides self-centering alignment of the coil strip for running "on-center" of the press and tooling. This assemblywill also provide independent adjustment of the guiderolls for running "off-center" applications. The assemblyincludes a locking thumbscrew and requires no wrenches for set-up.

• End of Stock Shut-off Electric Eye

This feature stops the feed and the press at the end ofthe coil strip. The feed drops from automatic mode andthe press stops on top. This prevents potential shortfeeds and bad hits on the tooling.

8

• Overhead Cable Set

The cable set between the control console and servo

roll feed is provided in an overhead conduit run. Thiswill provide the operator with no obstructions on thefloor between the enclosure and feed. Rigid conduit pipeis mounted to both the roll feed cabinet and the electrical enclosure to an 8' elevation above the floor. Flexible

conduit is used to provide a 6' span between the electrical enclosure and the roll feed.

• Feed-Signal-Press/Press-Signal-FeedThis circuit allows the operator to use a selector switchto choose either the Feed-Signal-Press mode or thePress-Signal-Feed mode of operation. If the press runsfaster than the feed this option is required to run inautomatic mode. It is the responsibility of the buyer totie in the "FSP-PSF" circuit to their press.

• 460 Volt Stepdown Isolation TransformerThe ServoMaster Series 1 and 2 are designed for 230volt AC incoming power. The 460 volt stepdown transformer is required when incoming plant voltage isgreater than 230 volts AC.

• ServoMaster Controller

This servo feed controller has a user-friendly keypad anda 4 line x 20 character alpha numeric display screen. Jobset-up and troubleshooting are made easy by the simpleformat and diagnostic information.'

• ServoMaster Controller Features

Standard features include the following:• Serial Communications Capability to Presses• Ergonomic Desk-Type Slant Top Enclosure• User Friendly Operator Interface and Keypad• Four Line 80 Character Alpha-Numeric Display• Keypad Input of All Servo Feed Parameters• Feed Length Setting from .001" to 999,999"• Batch Counter to 999,999 Cycles with Output• Remote Jog with Hand Held Pendant for Threading• "Feed Advisor" Feature to Calculate Job Set-ups• "On the Fly" Feed Length Micro Adjustment• Continuous Jog or Jog to Position for Threading• English or Spanish Language Capacity• Password Protected Job Edit and Selection

• Password Protected System Parameters• Error History Log of Last 20 Events• 100 Job Memory Storage Capacity• In'ch or Metric Programming• Tight Loop Detection Input• Feed Complete Signal Output• Batch Complete Output• Auxiliary Signal Output

• Ergonomic Desk-Type Slant Top EnclosureAll Coe Press Equipment servo roll feeds are providedwith a free standing sloped front control enclosurewhich houses all necessary servo controls and operating functions. The enclosure is provided with a "thrudoor" fused and lockable safety disconnect switch toprevent entry into the enclosure while the power is on.

• Pre-wired Flexible Cable Set

A 10' long pre-wired cable set contained in flexibleconduit is provided between the control enclosure andthe servo roll feed. The customer needs to provideincoming power. All other utility requirements are prewired.

• Remote Jog PendantThe remote jog pendant allows the operator to indexthe coil strip into the press die space and maintainvisual contact with the coil strip and tooling. Both jogforward and reverse buttons are provided as standard.

9

• Press Controls IntegrationCoe Press Equipment has developed the controls,designs, and software interface packages to provide integration of various press controls into the servo feed con-

• trois enclosure. This option provides the end-user with amore compact controls system and the potential of "single point entry" of all job specific parameters required torun the press and servo roll feed. Coe Press Equipmenthas worked with the following controls manufacturers:

• Data Instruments

• Link Systems

• Helm Instruments

• Toledo Transducers

• Triad Controls

• Gemco

• Others

ALTERNATE FEED METHODS AND CONTROLS

• Push-Pull Feed SystemThis multiple-axis feed system is typically utilized forfeeding light gauge or marking sensitive materials overlarge bed areas. The "Entrance" feed is placed in theincoming window of the press and controls the coil strip.The "Exit" feed is placed in the outgoing window of thepress and controls the strip web or skeleton. The multiple-axis motion control system maintains speed andposition between both roll feeds.

• Zig-Zag Feed SystemThis multiple-axis feed system is typically utilized for thenested blanking production of round parts. The servo driven feed rolls provide the forward indexing of the coilstrip. A servo driven precision ball screw mechanism provides the side shuttle. The side shuttle distance is deter

mined by the strip width, blank diameter, and number ofhits across the width of the strip.

• Step-Programmable ControlsThis controls solution is designed for "gagging" applications that require programmable outputs to control auxiliary devices in the part tooling and the repeating of aseries of feed "moves" to produce the part. Step-programmable programs can contain complex move patterns of various lengths, programmable outputs withdwells, and program loops and repeats.

• Profile Feed ControlsThis controls solution allows the servo roll feed to be

driven by the press speed and position or "profile". Thefeed position will always be coordinated with the pressposition. The profile feature optimizes the feed velocityand acceleration parameters to provide smoother feedingof the material. An encoder mounted to the press outputshaft provides input to the control system. This system isideal for transfer presses and link motion presses.

10

Cae Press Equipment offers a complete line of heavyduty servo driven roll feeds to meet the demands ofthe heavy gauge material and wide coil stock feeding applications. These feeds combine heavy dutyrugged construction features and machine toolprecision to provide torque, speed, and accuracy.Four standard models are available startingwith the CPRF-500Series with 5.0"diameter rolls, tothe CPRF-800Series with 8.0"diameter rolls.Extensive stan

dard equipmentand optional features can be combined to suit a

wide range ofapplications andcustomer specifications.

• Roll Feed Standard Equipment

• Rigid Tie Bar Construction for Precise Assembly

• High Performance Maintenance FreeAC Servo Motor

• Low Inertia and High Torque Output Drive System

• Precision Cluster Gear Driven Upper Feed Roll

• Pivoting Upper Feed Roll Assures Full Gear Mesh

• Precision Roller Bearings Mounted in Sideplates

• Feed Rolls with #3 Crodon Chrome Finish

• Partial Body Width Upper and Lower Feed Rolls

• Air Operated High Speed Pilot Release Mechanism

• Air Pressure Regulators for Exact Feed Roll Pressure

• FunnelledStock Pathfor Material Threading

• Full Sideplate and Funnelled Catenary Section

• Heavy Duty Cabinet with +/- 6" Height Adjustment

• Dual Roll Hand Crank Edge Guide Systems

• Remote Jog Pendant for Material Threading

• Pre-wired Flexible Control Cable Set

Note: Shown with optional Pull Through Straightener.

• Roll Feed Optional Equipment


• Motorized Edge Guide Adjustment

• Overhead Rigid Conduit Cable Set

• #5 Satin Chrome Finish on Feed Rolls

• Full Body Width Upper and Lower Feed Rolls

• Air Operated Anti-Backup Roller Assembly

• Integral Mounted Stock Lubricators

• Integral PullThrough Straighteners

• Roll Feed Controls Equipment• ServoMaster Controller

• Profile Feed Controller

• Step Programmable Controller

• Multiple Axis Control Systems

• "Auto matrix" Line Automation

11

500 SERIES HEAVY DUTY ROLL FEEDS

Machine SpecificationsMODEL

CPRF-524CPRF-536CPRF-548CPRF-560

Maximum Material Width24.0"36.0"48.0"60.0"


..250" .210".156".125"


325325325325

Maximum Acceleration (FPS')50454035


4.8:14.8:14.8:14.8:1



- With 780°/240° Press Angle 6" Progression

1181157113/150108/144102/136

12" Progression

86/11583/11180/10776/101

24" Progression

57/75551745417252/69

36" Progression

42/5641/5540/5439/53

Note: As standard, Cae Press Equipment Heavy Duty Roll Feeds are built on increments of 6", Pleaseconsult factory for machine widths and specifications not included in this chart. Also consult factoryfor alternative thickness and width capacity ratings or alternative speed and acceleration ratings.






.280".250".187".156"


290290290290

Maximum Acceleration (FPS')50454035


6.5:16.5:16.5:16.5:1




118/157113/150108/144102/136

12" Progression

83/11181/10878/10475/100

24" Progression

5317052/6951/6849/66

36" Progression

39/5238/5138/5037/49

Note: As standard, Cae Press Equipment Heavy Duty Roll Feeds are built on increments of 6", Pleaseconsult factory for machine widths and specifications not included in this chart, Also consult factoryfor alternative thickness and width capacity ratings or alternative speed and acceleration ratings.

12

Coe Press Equipment offers a complete line ofheavy duty servo driven roll feeds to meet the

demands of the heavy gauge materialand wide coil stock feeding appli

cations. These feeds com

bine heavy duty ruggedconstruction fea-

tures andmachine tool

precision toprovide

torque, speed,and accuracy. Fourstandard models are

available starting withthe CPRF-500 Serieswith 5.0" diameter

rolls, to the CPRF-800Series with 8.0" diameter rolls. Extensive

standard equipmentand optional features

can be combined to suit a

wide range of applications andcustomer specifications.

• Roll Feed Standard Equipment

• Rigid Tie Bar Construction for Precise Assembly

• High Performance Maintenance FreeAC Servo Motor

• Low Inertia and High Torque Output Drive System

• Precision Cluster Gear Driven Upper Feed Roll

• Pivoting Upper Feed Roll Assures Full Gear Mesh

• Precision Roller Bearings Mounted in Sideplates

• Feed Rolls with #3 Crodon Chrome Finish

• Partial Body Width Upper and Lower Feed Rolls

• Air Operated High Speed Pilot Release Mechanism

• Air Pressure Regulators for Exact Feed Roll Pressure

• FunnelledStock Path for Material Threading

• Full Sideplate and Funnelled Catenary Section

• Heavy Duty Cabinet with +/- 6" Height Adjustment

• Dual Roll Hand Crank Edge Guide Systems

• Remote Jog Pendant for Material Threading

• Pre-wired Flexible Control Cable Set

13

• Roll Feed Optional Equipment


• Motorized EdgeGuide Adjustment

• Overhead Rigid Conduit Cable Set

• #5 Satin Chrome Finish on Feed Rolls

• Full Body Width Upper and Lower Feed Rolls

• Air Operated Anti-Backup Roller Assembly

• Integral Mounted Stock Lubricators

• Integral PullThrough Straighteners

• Roll Feed Controls Equipment• ServoMaster Controller

• Profile Feed Controller

• Step-Programmable Controller

• Multiple Axis Control Systems

• "Auto matrix" Line Automation


Machine Specifications

MODEL

Maximum Material Width



Maximum Acceleration (FPS2)


Performance Specifications

.,

CPRF-736

36.0"

.310"

230

50

9.3:1

CPRF-748 CPRF-760CPRF-772

48.0"60.0"72.0"

.280"

.250".210"

230

230230

45

4035

9.3:1

9.3:19.3:1

MODEL

- With 780°/240° Press Angle6" Progression

12" Progression

24" Progression

36" Progression

CPRF-736

115/153

77/103

46/62

33/44

CPRF-748 CPRF-760CPRF-772

111/148

107/142102/136

75/100

73/9871/95

46/61

45/6044/59

33/44

33/4332/43

Note: As standard, Coe Press Equipment Heavy Duty Roll Feeds are built on increments of 6". Pleaseconsult factory for machine widths and specifications not included in this chart. Also consult factoryfor alternative thickness and width capacity ratings or alternative speed and acceleration ratings.






.350".310".280".250"


250250250250

Maximum Acceleration (FPS2)

50454035


9.9:19.9:19.9:19.9:1




116/155112/150108/144102/136

12" Progression

80/10678/10875/10473/97

24" Progression

49/6548/6947/6846/61

36" Progression

35/4735/5134/5034/45

Note: As standard, Coe Press Equipment Heavy Duty Roll Feeds are built on increments of 6". Pleaseconsult factory for machine widths and specifications not included in this chart. Also consult factoryfor alternative thickness and width capacity ratings or alternative speed and acceleration ratings.

14

FULLY INTEGRATED COIL FEEDING LINESCae Press Equipment designs and builds coilfeeding lines to meet a wide variety of mar

kets and application demands. Current applications include automotive, appliance,HVAC, lighting, housewares, service center,and others. We combine technologicallyadvanced design and expert manufacturingtechniques to produce fully integratedsystems to efficiently unwind, straighten, andfeed coil stock materials.

INDIVIDUAL EQUIPMENT

• Air Feeds

• Power StraightenersThe full line of power straightener equipment can process material at widths from 3.0" to 84.0" and thickness from .010"to .625". The correct design of breaker roll diameter and center distance spacing provides effective removal of coil set forall material types and size combinations. Breaker roll sizes from 2.25" to 6.00" are available with the capability of providing roller "back-ups" for low deflection applications. Standard features and benefits on this equipment include: heavyduty fabricated base, seven (7) breaker rolls, close tolerance cluster gear drive train, independent height adjustment of

breaker rolls, entrance side pinch rolls, exit side pinch rolls, DC or AC variable speed drive, material edge guide system,loop control system, and peeler / threader / hold down devices for "hands-free" material threading. A wide variety ofoptions and custom engineering can be provided to meet any application demands .

Cae Press Equipment single or double ended coil reels have capacities ranging from 1,500 Ibs to 60,000 Ibs andwidths ranging from 12" to 84". Both motorized and pull-off type reels are available depending on the application. The design of our reels incorporates unique "bearing tube" support for the mandrel and a heavy dutysupport base. Standard features and benefits of this equipment include: manual or hydraulic expansion ofmandrel, wedge or link type expansion, DC or AC variable speed drive, hydraulic threading drives, quick-releasenarrow coil keepers, and loop control. A wide variety of options, including traveling coil cars, coil upenders, and coilturnstyles, are available for just-in-time coil changes. Custom engineering can be provided to meet any application demands.

• Coil Reels

The air feed is a cost effective entry level feeding system offered in a full range of sizes and capacities. Starting withthe CF200 with a 2" diameter air feed cylinder through the CF600 with a 6" diameter air feed cylinder this product

can provide the driving force to meet any application needs. Wide and heavy material applications utilize a doublefeed head for gripping and feeding the coil stock. Standard features and benefits on this equipment include: handcrank stroke adjustment, heavy duty guide bars, high strength aluminum gripper assembly, and press interface controls. Available option equipment includes: ':Air Saver" cylinders, pull-through straighteners, powered threading rolls,remote jog control, stroke length indicators, and heavy-duty cabinet bases. The air feed equipment can be designedfor special feeding applications including: wire feeding, tube feeding, push-pull applications, dual strip applications,and zig-zag applications.

40549 Brentwood

Sterling Heights, MI 48310(586) 979-4400 • Fax (586) 979-2970

Website: www.cpec.com

• Cradle Feeder StraightenersThe cradle feeder straightener type of processing line is designed to (I) uncoil the materialwhile holding the coil 0.0. and (Ii) feed the material with a combination feeder /straightener. This equipment is effective for applications with minimum floor space availabilityand heavy gauge material. Standard features and benefits of this equipment include:DC or AC variable speed drive, cluster gear driven pinch rolls, power straightener breakerrolls, coil stock peeler for material threading, and adjustable inside plates. Custom engineering can be provided to meet any application demands.

Coe Press Equipment Corporation"The Company 17,at Peeds an Industry"

Documents

1 AND - · PDF file1 AND 2 • ServoMaster Series 1 The ServoMaster Series 1 servo roll feeds provide the speed, precision, and power for high speed and light gauge stamping