Upload
ngodang
View
220
Download
0
Embed Size (px)
Citation preview
Saves Labor
Cuts set up time in half, with a short payback period. Patented arched arms provide ample room to finish the top of base without removing the template. More time saved, and lower risk of rework.
Reusable Eliminates template fabrication, and no template support material required. BOLT STAR is a durable tool, strength tested to 1,000-lbs. Even inspectors like it!
Sustainable Reduces construction waste, since most wood bolt templates end up in municipal landfills. BOLT STAR is a more environment friendly solution made from recyclable material.
#1 Anchoring System in Pole Base ConstructionBOLT STAR® is a reusable bolt template designed to hold four anchor bolts and conduits in place while supporting the rebar cage during the toughest concrete pours.
Lightweight High Strength ABSRugged, washable, reusable
Arched ArmsFor complete finishing of base top without removing Tool
Cage Tie SlotsCenter and hold rebar cage during concrete pour
SpecificationsHolds 4 anchor bolts, 5⁄8" to 1" in diameter and up to 36" long
Center Hole4 1⁄8" opening holdsconduits in placeduring concrete pour
Bolt Projection CalculatorCalculate proper bolt projection from top of form
Integrated Bubble Leveling SystemEnsures straight bolts and level bases
FINALLY, THE BOLT TEMPLATE YOU’VE BEEN WAITING FOR
FEATURES
Adjustable Bolt SlotsGet it right with pre-measured markings for 7" to 14" bolt circle patterns
START SAVING TIME NOW – SEE WHY
ANNOUNCING
MADE INTHE USA
6 STEPS
14 STEPS
WITH BOLT STAR
WITHOUT1. Cut template supports 4. Drill holes
7. Center and check level10. Secure cage
to supports
13. Remove template
2. Cut out template 5. Secure bolts to template
8. Fasten template to supports
11. Pour concrete 14. Final finish
3. Layout bolt pattern
6. Place template on form9. Secure supports
to H frame
12. Rough finish top of base Don’t pull too early!
PAINLESS POLE BASES
1 2 3 4
5 6Set Bolt Star on form
Secure bolts to Bolt Star
Attach cage to Bolt Star
Pour concrete—room for chute and vibrator
Finish top of base
Remove Bolt Star
1
2
3
4
5
6
CONTACT YOUR dISTRIBUTOR TOdAY
© 2013–2014 Construction Innovations LLC. All rights reserved. The Bolt Star name and logo design are trademarks or registered trademarks of Construction Innovations LLC. All other logos or trademarks are the property of their respective owners. U.S. Patent D702569 and U.S. Patent Pending.
www.Bolt-Star.com
57% EFFICIENT
MORE