051214_0

Embed Size (px)

Citation preview

  • 7/26/2019 051214_0

    1/1

    Print Date: Sat Mar 28 14:05:11 CST 2015 MODEL 172 MAINTENANCE MANUAL (Rev 20

    5-12-14 (Rev 13)

    2015 Cessna Aircraft CompanyRetain printed data for historical reference only. For future maintenance, use only current data. Page 1

    INSPECTION OPERATION 14

    Date: _______________

    Registration Number: _______________

    Serial Number: _______________

    Total Time: _______________

    1. Description

    A. Operation 14 gives a list of item(s), which are completed every 2 years, or anytime componentsare added or removed from the airplane which have the potential to affect the magnetic accuracyand/or variation of the compass calibration, or anytime the accuracy of the compass is in question.

    B. Inspection items are given in the order of the zone in which the inspection is to be completed. Ageneral description of the inspection required and the Item Code Number for cross-reference tosection 5-10-01 are shown. Frequently, the tasks define more specifically the scope and extent ofeach required inspection. These tasks are printed in the individual chapters of this manual.

    C. The right portion of each page gives space for the mechanic's and inspector's initials and remarks.A copy of these pages can be used as a checklist when these inspections are completed.

    2. General Inspection Criteria

    A. During each of the specified inspection tasks in this section, more general inspections of theadjacent areas must be done while access is available. These general inspections are used to findapparent conditions which can need more maintenance.

    B. If a component or system is changed after a required task has been completed, then that specifiedtask must be done again to make sure it is correct before the system or component is returnedto service.

    C. Do a preflight inspection after these inspections are completed to make sure all the required itemsare correctly serviced. Refer to the Pilot's Operating Handbook and FAA Approved Airplane FlightManual.

    ITEM CODENUMBER

    TASK ZONE MECH IN-SP

    REMARKS

    342102 Magnetic Compass - Calibrate. 220

    *** End of Operation 14 Inspection Items ***