Embed Size (px)
DESCRIPTION
More information available at www.weldingsupply.com.au
Citation preview
119
Gas Accessories 120
Gas Hoses 120
Gas Hose Fittings 121
Air Hoses 122
Air Hose Components 123
Hose Clamps 123
Gas Bottle Trolleys 123
Mapp Gas & Components 124
Comet-Type Components 124
Comet-Type Acet Tips 125
Genuine Cigweld Acet Tips 125
Comet-Type LPG Tips 125
Genuine Cigweld Oxy/LPG Tips 126
3 Seat Cutting Acet Tips 126
3 Seat Cutting LPG Tips 126
Cutting Guides 126
Gas Regulators 128, 132–4, 143–4
Flashback Arrestors 128
Harris Components 132
Harris Acet Tips 135
Harris LPG Tips 136
Straight Line Cutters 138
Thermal Lance 140
Gas
Section Four
120
SE
CTIO
N F
OU
R –
GA
SGAS ACCESSORIES
FLINT LIGHTERS
SINGLE FLINT LIGHTERS
PN: 4-SFL
Metal Cup Type with replaceable flint. •Ensures quick, easy lighting up.
TRIPLE FLINT LIGHTERS
PN: 4-TFL
Rigid arm design concentrates more •force onto the flintEnd cup pockets gas for quicker •lightingFlint centered on abrasion cylinder for •even wear
FLINT LIGHTER RENEWALS
SINGLE FLINT RENEWALS – PER PACKET
PN: 4-SFR
Suits single flint lighter•Packet Quantity: 10ea
TRIPLE FLINT RENEWALS
PN: 4-TFR
Suits triple flint lighter•
TIP CLEANER SETS
STANDARD TIP CLEANER SET
PN: 4-TC
Suitable for tips, nozzles and Hi-•Speed nozzlesRemoves carbon or loose slag without •damaging gas parts
DRILL TYPE TIP CLEANER SET
PN: 308510Cleans drill type tip sizes 6 – 15•
PN: 308511Cleans drill type tip sizes 20 – 32•
GAS HOSES
SINGLE OXYGEN HOSE
PN: SOH5 / SOH10
Blue hose 5mm or 10mm I.D.•Oxygen Welding•
SINGLE ACETYLENE HOSE
PN: SAH5 / SAH10
Red hose 5mm or 10mm I.D.•Acetylene Welding•
SINGLE LPG (PROPANE) HOSE
PN: SLH5 / SLH10
Orange hose 5mm or 10mm I.D.•LPG Welding. Good flexibility at low •temperatures and crush resistant
TWIN OXY / ACETYLENE HOSE
PN: TO/AH5
Blue / Red hose 5mm•Maximum working pressure 2000kpa•
TWIN OXY / LPG (PROPANE) HOSE
PN: TO/LH5
Blue / Orange 5mm•Oxygen / LPG twin Welding. Good •flexibility at low temperatures & crush resistant.Maximum working pressure 1500kpa•
121
SE
CTIO
N F
OU
R – G
AS
GAS ACCESSORIES
TWIN OXY / ACETYLENE HOSE
PN: TO/AH10
Blue / Red hose 10mm•Oxygen / LPG twin Welding. Good •flexibility at low temperatures & crush resistant.
TWIN OXY/LPG HOSE
PN: TO/LH10
Blue / Orange hose 10mm•Oxygen / LPG twin Welding. Good •flexibility at low temperatures & crush resistant.
GAS HOSE SETS
HOSE SET - TWIN OXY / ACETYLENE
PN: 4-AC5M / 4-AC10M / 4-AC15M
Twin Blue / Red hose 5mm•5m / 10m / 15m•Complete with fittings•
HOSE SET – TWIN OXY / LPG
PN: 4-LP5M / 4-LP10M / 4-LP15M
Twin Blue / Orange hose 5mm•5m / 10m / 15m•Complete with fittings•
HOSE SET – TWIN OXY / ACETYLENE
PN: 8RBTH5M / 8RBTH10M
Twin Blue / Red hose 8mm•5m / 10m•Complete with fittings•
HOSE SET – TWIN OXY / LPG
PN: 8OBTH5M / 8OBTH10M
Twin Blue / Orange hose 8mm•5m / 10m•Complete with fittings•
GAS HOSE FITTINGS
BARBED NIPPLE – HF6
PN: NP
Suit 6mm I/D hose•
BARBED NIPPLE – HF8
PN: 9862
Suit 8mm I/D hose•
BARBED NIPPLE – HF10
PN: 9861
Suit 10mm I/D hose•
DOUBLE BARBS
PN: P703 / 4 / 5 / 6 / 8/ 105mm / 6mm / 8mm / 10mm / 12mm / •16mmBrass fitting•
HOSE COUPLING LEFT HAND / RIGHT HAND
PN: WB35 (LH)
WB34 (RH)
Hex nipple•5/8” UNF•
122
SE
CTIO
N F
OU
R –
GA
SGAS ACCESSORIES
RIGHT HAND NUT / LEFT HAND NUT
PN: RHN / LHN
Hose nut female RH / LH 5/8”•
HOSE END RIGHT HAND / LEFT HAND (Screw On)
PN: LP240 / LP112
Ferrule Type LH (240) / RH (112)•
HOSE JOINER (Screw on)
PN: LP265
Ferrule type hose joiner•
Y PIECE LEFT HAND / RIGHT HAND
PN: YLH / YRH
5/8” UNF “Y” PIECE•
ADAPTOR COUPLING RIGHT HAND (UNF to NPT)
PN: DR27
Outlet fitting ¼” BSP – 5/8” UNF•Suits most regulators requiring RH •thread outlets
ADAPTOR COUPLING LEFT HAND (UNF to NPT)
PN: DR90
Outlet fitting ¼” BSP – 5/8” UNF LH•Suits most Acetylene regulators and •LPG regulators
R/H / L/H 90 Deg Male to Female ADAPTOR
PN: 122 TA34 / 122 TA35
5/8” UNF R/H / L/H right angle •adaptor
AIR HOSES
BLUE TRIPLEX AIR HOSE
PN: TF6 / TF8 / TF10 / TF12
6mm / 8mm / 10mm / 12mm I.D.•Excellent flexibility at low temperature•For transfer of Air, Water and suitable •as Air Compressor hoseUV stabilized•Temperaturerange0˚Cto60˚C•
BLUE LAYFLAT AIR HOSE
PN: LFH32B 32mm I.D.PN: LFH38B 38mm I.D.PN: LFAB040 40mm I.D.PN: LFH50B 50mm I.D.PN: LFH65B 65mm I.D.
Medium duty PVC layflat hose•Chemical resistant•UV stabilized•Temperaturerange-10˚Cto+60˚C•
123
SE
CTIO
N F
OU
R – G
AS
GAS ACCESSORIES
GATX / NITTO PLUG FEMALE THREAD
PN: PF20 / PF30 / PF40
¼” / 3/8” / ½”•
GATX / NITTO PLUG HOSE TAIL
PN: PH20 / PH30 / PH40
¼” / 3/8” / ½”•
GATX / NITTO PLUG MALE THREAD
PN: PM20 / PM30 / PM40
¼” / 3/8” / ½”•
GATX / NITTO SOCKET FEMALE THREAD
PN: SF20 / SF30 / SF40
¼” / 3/8” / ½”•
GATX / NITTO SOCKET HOSE TAIL
PN: SH20 / SH30 / SH40
¼” / 3/8” / ½”•
GATX / NITTO SOCKET MALE THREAD
PN: SM20 / SM30 / SM40
¼” / 3/8” / ½”•
HOSE CLAMPS
MONOCLIPS – OETIKER 1 – EAR
PN: SIZE:MC070 7.0mmMC090 9.0mmMC100 10.0mmMC108 10.8mmMC118 11.8mmMC131 13.1mmMC138 13.8mmMC143 14.3mmMC148 14.8mmMC153 15.3mmMC158 15.8mmMC161 16.1mmMC168 16.8mmMC178 17.8mmMC188 18.8mmMC200 20.0mmMC211 21.1mmMC228 22.8mmMC238 23.8mmMC248 24.8mmMC300 30.0mm
GAS BOTTLE TROLLEYS
SINGLE TROLLEY – E SIZE / G SIZE
PN: MT233-1 / MT232-1Designed to carry one G (MT232) or E (MT233) size gas bottle. The bottle is held securely in place via a retaining chain, bottle brackets and an elevated toe plate.
DUAL TROLLEY – D SIZE
PN: CT22-125
Bottle brackets, retaining chains, and an elevated toe plate ensures cylinders are held securely. With single handle and contoured hand grip.
DUAL TROLLEY – E and D SIZE
PN: MT229-1
Designed to carry both D and E gas bottles. With bottle brackets, retaining chains, elevated toe plate, and pram handle.
DUAL TROLLEY – E/G SIZE
PN: MT230-2
The most popular dual G and E size oxy/acetylene gas bottle trolley. The flat toe plate makes loading/unloading of bottles simple, and bottle brackets and chains ensure the load is secure.
124
SE
CTIO
N F
OU
R –
GA
SGAS ACCESSORIES
MAPP GAS & TORCHES
MAPP GAS CYLINDER
PN: MT1
453g Cylinder•
SUREFIRE TORCH SELF IGNITING
PN: T757
MAPP GAS TORCH & GAS KIT COMPLETE
PN: MT1T757K
COMET TYPE COMPONENTS
BLOWPIPE (HANDLE)
PN: 400011
CUTTING ATTACHMENT
PN: 400013
TIP NUT – COMET
PN: NN14
COMET 3 CUTTING ATTACHMENT VALVE KIT
PN: 304015
MIXER – STANDARD – Brazing & Sml Heating
PN: 400012
3/8” 10mm•
MIXER – LARGE ACETYLENE - Heating
PN: 4-AHMX
½” 13mm•
MIXER – LARGE LPG / PROPANE - Heating
PN: 4-LPHMX
½” 13mm•
HEATING TIP BARREL – STRAIGHT
PN: HB123
735mm•
HEATING TIP BARREL – BENT
PN: 4-SHB
450mm•
UNIFLAME OXY / ACET CUTTING KIT in carry case
PN: KKOXY/A
Includes Flashback Arrestors, wheels •and heating tip
125
SE
CTIO
N F
OU
R – G
AS
GAS ACCESSORIES
OXY / LPG CUTTING KIT in carry case
PN: KKOXY/L
COMET – TYPE ACETYLENE TIPS
PN: CUTTING TIP # SIZE mm41-6 6 1 – 641-8 8 6 - 1041-12 12 12 - 2041-15 15 25 - 7541-20 20 (CN4120B) 100 - 12541-24 24 (CN4124) 150 - 20041-32 32 (CN4132) 225 - 30041-48 48 (306053) 300 – 400
41-8
41-12
41-15
41-24
41-32
PN: GOUGING TIP #41-32GS STRAIGHT # 3241-32GB BENT # 3241-48GB BENT # 4841-64GB BENT # 64
PN: WELDING TIP # SIZE mm551-6 6 1.2551-8 8 2.0551-10 10 2.6551-12 12 3.2 – 4.0551-15 15 5.0 – 6.5551-20 20 8.2 – 10551-26 26 13 – 19551-32 32 25
HEATING TIP 8 x 12 with BARREL
PN: 4-AH812
180 MJ/hr•
HEATING TIP 8 x 12
PN: 4-AHT1
180 MJ/hr•
HEATING TIP 12 x 12
PN: 4-AHT2
215 MJ/hr•
GENUINE CIGWELD ACETYLENE TIPS
PN: TYPE 41 OXY/ACET CUTTING TIP #
306046 6
306047 8
306048 12
306049 15
306050 20
306051 24
306052 32
306053 48
COMET – TYPE LPG/PROPANE TIPS
PN: CUTTING TIP # SIZE mm44-6 6 3 - 644-8 8 6 - 1244-12 12 12 - 2044-15 15 25 - 7544-20 20 100 - 12544-24 24 150 - 20044-32 32 225 – 300
126
SE
CTIO
N F
OU
R –
GA
SGAS ACCESSORIES
COMET – TYPE LPG/PROPANE TIPS
PN: GOUGING TIP #44-32GS STRAIGHT # 3244-32GB BENT # 3244-48GB BENT # 2844-64GB BENT # 64
COMET – TYPE LPG/PROPANE WELDING TIPS
PN: WELDING TIP #8-8 8554-10 10554-12 12554-15 15554-20 20
COMET – TYPE LPG/PROPANEHEATING TIPS
PN: HEATING TIP # SIZE4-LPHT1 18 x 12 280MJ/hr4-LPHT2 36 x 12 420MJ/hr4-LPHT3 48 x 12 560MJ/hrHT117 48 x 15 840MJ/hr
GENUINE CIGWELD PROPANE TIPS
PN: TYPE 44 OXY/LPG CUTTING TIP #
306025 6 306026 8306028 12306029 15306030 20306031 24306032 32
3 SEAT CUTTING TIPS – ACETYLENE
LOW SPEED TYPE 51
PN: ACET CUTTING TIP SIZE
PLATE THICKNESS
306114 00 0 – 5mm306115 0 5 – 10mm306116 1 10 – 15mm306117 2 15 – 30mm306118 3 30 – 40mm306119 4 40 – 50mm306120 5 50 – 100mm306121 6 100 – 150mm306122 7 150 – 250mm306123 8 250 – 300mm
HIGH SPEED TYPE 51
PN: ACET CUTTING TIP SIZE
PLATE THICKNESS
306124 00 0 – 5 mm306125 0 5 – 10mm306126 1 10 – 15mm306127 2 15 – 30mm306128 3 30 – 40mm306129 4 40 – 50mm306130 5 50 – 100mm306131 6 100 – 150mm
3 SEAT CUTTING TIPS – LPG / PROPANE
LOW SPEED LPG TYPE 54
PN: PROPANE CUTTING TIP SIZE
PLATE THICKNESS
306096 00 0 – 5mm306097 0 5 – 10mm306098 1 10 – 15mm306099 2 15 – 30mm306100 3 30 – 40mm306101 4 40 – 50mm306102 5 50 – 100mm306103 6 100 – 150mm
HIGH SPEED LPG TYPE 54
PN: PROPANE CUTTING TIP SIZE
PLATE THICKNESS
306104 00 0 – 5mm306105 0 5 – 10mm306106 1 10 – 15mm306107 2 15 – 30mm306108 3 30 – 40mm306109 4 40 – 50mm306110 5 50 – 100mm306111 6 100- 150mm306112 7 150 – 250mm
127
SE
CTIO
N F
OU
R – G
AS
CUTTING GUIDES
TANJANT COMET – TYPE ROLLER GUIDE
PN: TJ1602
TANJANT HARRIS – TYPE ROLLER GUIDE
PN: TJ1605
TANJANT PLASMA CUTTING ROLLER GUIDE
PN: TJ1507
TANJANT ROLLER GUIDE 35mm BASE
PN: TJ1535
TANJANT ROLLER GUIDE TECHMO 100 /150
PN: TJ1542
TANJANT ROLLER GUIDE SAF CP40R
PN: TJ1551
TANJANT CIRCLE CUTTING GUIDE 35mm BASE
PN: TJ1202
TANJANT CIRCLE CUTTING GUIDE
PN: TJ1083
TANJANT PLASMA KIT – HYPERTHERM PAC 120
PN: CP1002
TANJANT PLASMA KIT – PCH52
PN: CP2001
TANJANT PLASMA KIT – TECHMO 100 / 150
PN: CP2061
TANJANT PLASMA KIT – TRAFIMET S74
PN: CP2057
GAS ACCESSORIES
128
SE
CTIO
N F
OU
R –
GA
S UNIMIG REGULATOR – ARGON
PN: UNIREG
UNIMIG REGULATOR – OXYGEN
PN: UNIREGOX
UNIMIG REGULATOR – ACETYLENE
PN: UNIREGAC
HARRIS CIRCLE CUTTING GUIDE – WHEELS & BAR
PN: I696
CIRCLE MATE CIRCLE CUTTING GUIDE
PN: CIRMATE
GAS ACCESSORIES
SPIGGOT ‘O’ RINGS
PN: SPIGO
BINZEL FLOWTESTER
PN: 191.0003
UNIMIG ARGON FLOWMETER
PN: UNIFLO
UNIMIG REGULATOR – ARGON with FLOWMETER
PN: UNIREGFLO
129
SE
CTIO
N F
OU
R – G
AS
GAS ACCESSORIES
130
SE
CTIO
N F
OU
R –
GA
SGAS ACCESSORIES
A brief maintenance guide for Workshop Gas Equipment
Below is a brief outline of the Standards Australia AS4839-2001. However to meet your workplace safety obligations, each workshop should obtain their own copy of the Standards Australia AS4839-2001, to ensure they are operating in-accordance with the Australian law.
131
SE
CTIO
N F
OU
R – G
AS
GAS ACCESSORIES
132
SE
CTIO
N F
OU
R –
GA
S FLASHBACK ARRESTORS
HARRIS FLASH BACK ARRESTOR – ACET / LPG
PN: 188TAL
Fits regulator•
HARRIS FLASH ARRESTOR – OXYGEN
PN: 188TAR
Fits regulator•
HARRIS HI-FLOW FLASH ARRESTOR - OXYGEN
PN: 1882TAR
Fits hi-flow regulator•
HARRIS HI-FLOW FLASH ARRESTOR – ACET / LPG
PN: 1882TAL
Fits hi-flow regulator•
HARRIS FLASHGUARDS – OXYGEN (COMET)
PN: 883AR1
Fits torch end – Comet•
HARRIS FLASHGUARDS – ACET / LPG (COMET)
PN: 883AL1
Fits torch end – Comet•
HARRIS FLASHGUARDS – OXYGEN (HARRIS)
PN: 886AR
Fits torch end – Harris•
HARRIS FLASHGUARDS – ACET / LPG (HARRIS)
PN: 886AL
Fits torch end – Harris•
Flash Arrestor & Flashguards for OXY & ACET / LPG
PN: SAFETYPAK1
HI – FLOW Version of SAFETYPAK1
PN: SAFETYPAK4
HARRIS SAFETY LOCK KEY for Gas Cylinders
PN: A825ES
GAS ACCESSORIES
133
SE
CTIO
N F
OU
R – G
AS
HARRIS FLOWMETER
PN: 86630L
0 – 30 l / min•
HARRIS ARGON REGULATOR PRESET Vertical Inlet
PN: 801Z019350 kpa•
HARRIS ARGON REGULATOR Vertical Inlet
PN: 801E30L
0 – 30 l/min•
HARRIS ARGON REGULATOR SAV–T–LOCK
PN: 825ET30LAR21
0 – 30 l/min•
HARRIS ARGON REGULATOR SAV-T-LOCK
PN: 847T30LAR237
0 – 30 l/min•
HARRIS GAUGELESS 818 OXYGEN
PN: 818Z003
0 – 800 kpa•
HARRIS GAUGELESS 818 ACETYLENE
PN: 818Z001
0 – 400 kpa•
HARRIS GAUGELESS 818 LPG / PROPANE
PN: 818Z002
0 – 150 kpa•
GAS ACCESSORIES
134
SE
CTIO
N F
OU
R –
GA
SGAS ACCESSORIES
HARRIS GAUGELESS 829 HI-FLOW OXYGEN
PN: 829E800OX47
0 – 1000 kpa•
HARRIS 801 OXYGEN
PN: 801E1000OX13
0 – 1000 kpa•
HARRIS 801 ACETYLENE
PN: 801E150AC21
0 – 150 kpa•
HARRIS 801 LPG / PROPANE
PN: 801Z0050 – 400 kpa•
HARRIS 825 HI-FLOW OXYGEN
PN: 825EX1000OX3
0 – 1000 kpa•
HARRIS 825 HI-FLOW ACETYLENE
PN: 825EX150AC33
0 – 150kpa•
HARRIS 825 HI-FLOW LPG / PROPANE
PN: 825Z005
0 – 400kpa•
HARRIS 825 NITROGEN SIDE INLET
PN: 825Z085
0 – 1500 kpa•
HARRIS 825 NITROGEN HIGH PRESSURE
PN: 825Z080
0 – 4000 kpa•
135
SE
CTIO
N F
OU
R – G
AS
HARRIS CONTRACTORS KIT – OXY / ACET
PN: 19368015
HARRIS CONTRACTORS KIT OXY PROPANE
PN: 19368016
HARRIS RUBBER HARD HAT GAUGE PROTECTOR
PN: CPR6333
GAS ACCESSORIES
1 – PIECE CUTTING TORCH 142 ACET
PN: Z142037
1 – PIECE CUTTING TORCH 142F LPG
PN: 142033
1 – PIECE CUTTING TORCH TYPE 41/44 CUTTING TIPS
PN: Z142038
1 – PIECE CUTTING TORCH 624L ACET
PN: 062Z090
1 – PIECE CUTTING TORCH 624FL LPG
PN: 062Z084
1 – PIECE CUTTING TORCH LPG 90 deg HEAD 1000mmSTRAIGHT 1000mm
PN: 062Z088 PN: 062Z066
PRO CUTTING ATTACHMENT ACET – Harris
PN: 493
PRO CUTTING ATTACHMENT LPG – Harris
PN: 493F
PRO CUTTING ATTACHMENT ACET – Comet 3
PN: 493FHC
TIP NUT
PN: 6259b
CLASSIC HANDLE
PN: Z063010
PROFESSIONAL HANDLE
PN: 043013
PRO MIXER ACET – Harris
PN: E43
136
SE
CTIO
N F
OU
R –
GA
SGAS ACCESSORIES
PRO MIXER ACET – Comet 3
PN: E43HC
PRO MIXER LPG
PN: F43
TIP TUBE BENT 710mm STAINLESS STEEL LPG/PROPANE
PN: 23932F
TIP TUBE BENT 380mm STAINLESS STEEL LPG/PROPANE
PN: 23933F
TIP TUBE STRAIGHT 1040mm STAINLESS STEEL LPG/PROPANE
PN: 23935F
HARRIS ACETYLENE TIPS
PROFESSIONAL CUTTING TIPS
PN: SPEC:6290 00AC 5 – 10mm6290 0AC 10 – 15mm6290 1AC 15 – 25mm6290 2AC 25 – 50mm6290 3AC 50 – 75mm6290 4AC 75 – 150mm6290 5AC 150 – 200mm6290 6AC 200 – 300mm
CONTRACTOR SERIES CUTTING TIP ACETYLENE
PN: SPEC:3690 00AC 0 – 6mm3690 0AC 6 – 13mm3690 1AC 13 – 25mm3690 2AC 25 – 75mm
MACHINE CUTTING TIPS – HIGH SPEED ACETYLENE
PN: SPEC:
6290 1VAX 0 – 8mm
6290 2VAX 8 – 15mm
6290 3VAX 15 – 35mm
6290 4VAX 35 – 75mm
6290 5VAX 75 – 150mm
6290 6VAX 150 -200mm
PROFESSIONAL GOUGING TIPSACETYLENE
PN: 6290 1G / 2G / 3G
PROFESSIONAL MULTI – FLAMEHEATING TIP ACETYLENE
PN: J364 SHA2
HARRIS LPG/PROPANE TIPS
PROFESSIONAL CUTTING TIPS
PN: SPEC:
000NX 0 – 5mm
00NX 5 – 10mm
0NX 10 – 15mm
1NX 15 – 25mm
2NX 25 – 50mm
3NX 50 – 75mm
4NX 75 – 150mm
5NX 150 – 200mm
6NX 200 – 300mm
7NX 300 - 380mm
HEAVY DUTY LPG/PROPANE CUTTING TIPS
PN: SPEC:
6NH 250 – 275mm
7NH 275 – 300mm
8NH 300 – 380mm
137
SE
CTIO
N F
OU
R – G
AS
MACHINE CUTTING TIPS – HIGH SPEED LPG/PROPANE
PN: SPEC:
5/0VVC 0 – 4mm
4/0VVC 4 – 6mm
3/0VVC 6 -9mm
2/0VVC 9 – 12.5mm
0VVC 12.5 – 20mm
0.5VVC 20 – 35mm
1VVC 35 – 60mm
1.5VVC 60 – 75mm
2VVC 75 – 125mm
2.5VVC 125 – 150mm
3VVC 150 – 175mm
4VVC 175 – 200mm
5VVC 200 – 225mm
5.5VVC 225 – 250mm
PROFESSIONAL GOUGING TIPSLPG/PROPANE
PN: SPEC:
1GG 3 x 6mm
2GG 5 x 10mm
3GG 6 x 13mm
GAS ACCESSORIES
PROFESSIONAL HEATING TIPSLPG/PROPANE
PN: SPEC:
22901H 186 MJ/hr
22902H 298 MJ/hr
22903H 532 MJ/hr
22904H 663 MJ/hr
22905H 934 MJ/hr
PROFESSIONAL HEATING TIP (fits cutting attachment) LPG/PROPANE
PN: SPEC:
H621P 186 MJ/hr
H622P 298 MJ/hr
H623P 532 MJ/hr
138
SE
CTIO
N F
OU
R –
GA
SGAS ACCESSORIES
WELDMAX AUTOMATIC STRAIGHT LINE CUTTING MACHINE
PN: SX300-1 – Single torch headPN: SX300-2 – Dual torch headThe Weldmax SX300-1 and SX300-2 gas cutting machines are capable of cutting horizontally on plate and are set-up to be used in conjunction with a 1.8metre long metal track. The Weldmax Automatic Straight line cutting machine can be used for welding applications with ease by using an Automatic Mig welding torch. Motors and ControlsThe Weldmax’s direction and speed control is at your fingertips with the durable and rugged Motor Control insert. VERSATILEStraight 90 º plate cuts or Bevels plate at angles up to 45º with minimal effortMINIMUM SET-UP TIMEOnly torch height and angle adjustment is required.ADAPTABLECan be used with Oxy/Fuel Torches having a 32mm barrel diameter or Mechanized Plasma Torches via adaptorThe Weldmax SX300 Kits Include:
Base Machine.•Oxy / Fuel Torch •Torch Holder•Torch Arm.•Torch Holder.•1 x 1.8mtr Track – Extra track available•3 x Cutting Tips – 3 Seat Tips•Parts and Operating Manual.•
The Weldmax SX300 Optional accessories:Circle cutting attachment PN: SX-300CCAAdditional Tracks PN: SX-300T
(Above track also suitable for Koike, Beetle, Platemate II)High speed gear box - for Plasma Cutting and/or Mig welding 1000 – 2950mm / minLPG or Acetylene cutting tips
TECHNICAL SPECIFICATIONS
Cutting Thickness 3 – 250mm thick plateWheels 2 x Drive at rear, 1 x steer at front Set-up time 2 min Min Cutting Speed 100mm / minute Max Cutting Speed 1000mm / minute Circle Cutting 500mm up to 2000mm Weight 14kgDimensions 450mmL x 230mmW x 220mmH
WELDMAX PORTABLE PIPE CUTTING MACHINE
PN: SX20 – Single torch headThe Weldmax SX20 chain driven gas cutting machine is capable of cutting unlimited sized pipe by using the chains to secure the machine to the pipe. VERSATILEStraight 90 º pipe cuts or Bevels pipe at angles up to 45º MINIMUM SET-UP TIMEOnly torch height and angle adjustment is required.ADAPTABLECan be used with Oxy/Fuel Torches having a 32mm barrel diameter The Weldmax SX20 Kits Include:
Basic Machine.•Oxy / Fuel Torch •Torch Holder•1 x 2.4mtr Chain – Extra chains •available3 x Cutting Tips – 3 Seat Tips•Parts and Operating Manual.•
The Weldmax SX20 Optional accessories:Additional Chain 2.4mtr PN: SX-20CLPG or Acetylene cutting tips
TECHNICAL SPECIFICATIONS
Cutting Thickness 3 – 250mm Wheels 4 x Idle wheels Set-up time 5 min Minimum Pipe Diameter 100mm Maximum Pipe Diameter 600mm – Using single chain Maximum Pipe Diameter Unlimited – Using multiple chains Weight 9kgDimensions 212mmL x 208mmW x 415mmH
UNIFLAME AUTOMATIC STRAIGHT LINE CUTTING MACHINE
PN: CG30L – Single torch head
PN: CG30LD – Dual torch head
The Uniflame CG-30L and CG-30LD gas cutting machines are capable of cutting horizontally on plate and are set-up to be used in conjunction with a 1.8metre long metal track. The Uniflame Automatic Straight line cutting machine can be used for welding applications with ease by using an Automatic Mig welding torch. Motors and ControlsThe Uniflame’s direction and speed control is at your fingertips with the durable and rugged Motor Control insert. VERSATILEStraight 90 º plate cuts or Bevels plate at angles up to 45º with minimal effortMINIMUM SET-UP TIMEOnly torch height and angle adjustment is required.ADAPTABLECan be used with Oxy/Fuel Torches having a 32mm barrel diameter or Mechanized Plasma Torches via adaptorThe Uniflame Kit Includes:
Base Machine.•Oxy / Fuel Torch •Torch Holder•Torch Arm.•Torch Holder.•Mini Tool kit•1 x 1.8mtr Track – Extra track available•3 x Cutting Tips – 3 Seat Tips•Parts and Operating Manual.•
No circle cutting attachment available for these models
139
SE
CTIO
N F
OU
R – G
AS
TECHNICAL SPECIFICATIONSCutting Thickness: 3–200mm thick plateWheels: 2 x Drive at rear, 1 x steer at front Set-up time 1 minute Minimum Cutting Speed 120mm / minute Maximum Cutting Speed 820mm / minute Weight 7kgDimensions 350mmL x 215mmW x 180mmH
WELDMAX AUTOMATIC PROFILE CUTTING MACHINE
PN: SX50 – Single torch head
The Weldmax SX50 Template cutting machine is capable of cutting shapes on plate from a template and is set-up to be used in conjunction with a magnetic roller to trace the shape. The Weldmax Automatic Profile cutting machine can be used for other applications such as Plasma cutting. FeaturesRobust Heavy duty designFull 360° rotation for cutting large circlesAutomatic or manual cut-start featureLarger cutting areaLevel adjustment on pivot base for uneven surfacesVariable speed control to suit sheet thickness and method of cutting (Oxy or Plasma)Controls conveniently placed near torchPortableThe Weldmax SX50 Kits Include:
Base Machine.•Oxy / Fuel Torch •3 x Cutting Tips – 3 Seat Tips•Parts and Operating Manual.•
The Weldmax SX50 Optional accessories:LPG and/or Acetylene cutting tips
TECHNICAL SPECIFICATIONS
Cutting Thickness: 0.5(Plasma) – 250mm (Oxy)Set-up time 5 min Min / Max Cutting diameters See diagram at right Weight 50kg
GAS ACCESSORIES
WELDMAX AUTOMATIC STRAIGHT LINE CUTTING MACHINE
PN: SX150 – Single torch head
The Weldmax SX150 gas cutting machines are capable of cutting horizontally on plate and are set-up to be used in conjunction with a 1.8metre long metal track. This machine was designed for applications where access is the issue, and circle cutting is required. Motors and ControlsThe Weldmax’s direction and speed control is at your fingertips with the durable and rugged Motor Control insert, allowing a single hand operation. VERSATILEStraight 90 º plate cuts or Bevels plate at angles up to 45º with minimal effortMINIMUM SET-UP TIMEOnly torch height and angle adjustment is required.ADAPTABLECan be used with Oxy/Fuel Torches having a 32mm barrel diameter or Mechanized Plasma Torches via adaptorThe Weldmax SX150 Kits Include:
Base Machine.•Oxy / Fuel Torch •Torch Holder•Torch Arm.•Torch Holder.•1 x 1.8mtr Track – Extra track available•3 x Cutting Tips – 3 Seat Tips•Parts and Operating Manual.•
The Weldmax SX150 Optional accessories:Additional Tracks 1.8mtr PN: SX-150TLPG or Acetylene cutting tips
TECHNICAL SPECIFICATIONS
Cutting Thickness: 3–250mm thick plateWheels 2 x Drive at rear, 1 x steer at front Set-up time 2 min Min Cutting Speed 100mm / minute Max Cutting Speed 1000mm / minute Circle Cutting 360mm up to 1200mm Weight 10kgDimensions 387mmL x 123mmW x 220mmH
140
SE
CTIO
N F
OU
R –
GA
SGAS ACCESSORIES
THERMIC LANCE
A Thermic Lance is a steel pipe packed with mixed metal wires. The Thermic Lance is a great cutting/gouging/piercing tool for any application. Once set-up with a Safety Lance Handle at one end, you apply a heating source to the opposite end, such as an oxy-acetylene or oxy-LPG torch or a Lance Igniter and allow oxygen to be passed through the centre of the lance via the handle. The Thermic Lance will ignite into a large sparkler reaction, with a fierce combusting zone of approx. 4000°C.Some common applications of Thermic & Mini Thermic Lances are:
The cutting up of Large Metal Castings or Frozen masses of metals (spills)•De-slagging of Furnace outlets and maintenance•The removal of stubborn plugs and pins out of Heavy Machinery•The removal of Hardfacing material, to replace worn parts•For removal of large metal beams/structures in Demolition•Cutting down large metal objects for Scrap purposes•Underwater: The cutting of metal objects underwater•
Ideal Industries: Foundries, Demolition, Scrap Metal, Earthmoving MaintenanceAble to Pierce/Cut any material known to man
THERMIC LANCE SIZES
Lance Handles SizesMini - 6mmMini - 10mm Standard - 12mmStandard - 16mmStandard - 19mmStandard - 27mmMini Thermic Lances6mm x 505mm6mm x 1000mm10mm x 505mm10mm x 1000mmThermic Lances12mm x 2750mm16mm x 2750mm19mm x 2750mm27mm x 3250mm
141
SE
CTIO
N F
OU
R – G
AS
gas control systems
Cost Controls
Environment & Safety
Weld Quality
gas control systems
Cost Controls
Environment & Safety
Weld Quality
PMC brochure.indd 1 17/3/09 3:51:58 PM
142
SE
CTIO
N F
OU
R –
GA
S HIGH PERFORMANCE REGULATORS
SafeManufactured in accordance with AS4267 and EN ISO 2503:1998.•Internal safety shut off - if first stage overpressurises, regulator shuts down•40 micron Sintered inlet filters – keeps gas lines free of impurities to protect downstream equipment•Machined from solid porosity tested grade 385 brass.•Working pressure tested to 10,000psi – no forged components.•
EfficientMultistage regulation – Reduces gas wastage from 30% - 70% over conventional regulators•Spherical valve design – gives far greater control at much lower pressures•Anti-turbulence control – Eliminates turbulence and provides excellent control for long hose length delivery•Valve extension nipple – Allows the full use of gas in bottle without compromising weld quality•
Precision ControlNo variation in outlet pressure as bottle pressure changes – for multistage regulators•Convoluted stainless steel diaphragms – gives more pressure sensitivity within a smaller area•Anti-friction seat – much faster reseating•Low pressure control – eliminates initial surge which not only wastes up to 60% of the gas, but is the major cause of splatter, •porosity and cold cracking in aluminium
InnovativeNo tools required to set up regulator or bottle due to O-ring•Purge lines taken off intermediate stages – in effect two regulators in one•All components manufactured in Australia (except pressure gauges)•Modular body design – multiple porting options – up to 4 outlets with 2 inlets•Reticulation and auto-changeover systems designed and built for larger users •
NITROGEN GAS REGULATORS
Single-Stage PMC Nitrogen Regulator
PN: S200NTN
Unique Spherical Valve System and •low friction seat40 Micron Sintered Brass inlet filters•Convoluted Stainless Steel high •pressure diaphragmsMachined from solid Porosity Tested •385 brass, no forgings!Manufactured in accordance with •Australian standard AS4267Outlet pressure 3000kpa•Relief valve fitted where required•
Piston Sensing Single-Stage PMC Nitrogen Regulator
PN: PSS200TNBTN
Unique Spherical Valve System and •low friction seat40 Micron Sintered Brass inlet filters•Convoluted Stainless Steel high •pressure diaphragmsMachined from solid Porosity Tested •385 brass, no forgings!Manufactured in accordance with •Australian standard AS4267Captured Stainless Steel “T” Bar •Control, and needle thrust bearing on load surface provide smooth adjustment at high pressurePiston sensing up to 28,000kpa outlet •pressuresInterchangeable kits allow various •outlet pressure rangesRelief valve fitted where required•
GAS ACCESSORIES
Single-Stage PMC Multi-Featured Nitrogen Regulator
PN: S200TNBTN
Unique Spherical Valve System and •low friction seat40 Micron Sintered Brass inlet filters•Convoluted Stainless Steel high •pressure diaphragmsMachined from solid Porosity Tested •385 brass, no forgings!Manufactured in accordance with •Australian standard AS4267Captured Stainless Steel “T” Bar •Control, and needle thrust bearing on load surface provide smooth adjustment at high pressureOutlet pressure 3500kpa•Relief valve fitted where required•
143
SE
CTIO
N F
OU
R – G
AS
GAS ACCESSORIES
ARGON GAS REGULATORS
Multi-Stage PMC Argon Regulator
PN: S350NSHF15G
Unique Spherical Valve System and •low friction seat40 Micron Sintered Brass inlet filters•Convoluted Stainless Steel high •pressure diaphragmsMulti stage regulation for precise and •consistent gas flows plus gas savingsMachined from solid Porosity Tested •385 brass, no forgings!Manufactured in accordance with •Australian standard AS4267
ONSITE DEMONSTRATIONS AVAILABLE
Secondary Regulator Kit
PN: S200ANFG15
Consists of secondary single •stage regulator with flowmeter and mounting kit40 Micron Sintered Brass inlet filters•Convoluted Stainless Steel high •pressure diaphragmsMulti stage regulation for precise and •consistent gas flows plus gas savingsMachined from solid Porosity Tested •385 brass, no forgings!
Split Regulator System
PN: S200DSH / S200ANFG15
Consists of primary single stage •regulator, secondary single stage regulator and mounting kit40 Micron Sintered Brass inlet filters•Convoluted Stainless Steel high •pressure diaphragmsMulti stage regulation for precise and •consistent gas flows plus gas savingsMachined from solid Porosity Tested •385 brass, no forgings!
144
SE
CTIO
N F
OU
R –
GA
S
