Upload
igor-spirkoski
View
91
Download
23
Tags:
Embed Size (px)
Citation preview
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 1
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 2
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 3
Open SolidWorks
Go to: Start > Programs > SolidWorks
Create a new part Open a new part with model units set to millimeters. Go to: File > New > Part Select the three planes in the feature tree and make them visible by clicking on the glasses.
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 4
Create a new sketch on the Front Plane Select the Front Plane in the Feature Manager
Click at the 2D Sketch icon to make a new sketch Go to: Tools > Sketch Tools > Sketch Picture Browse to the YachtTutorial map and go to: Blueprints > Select “Blueprint_Front.PNG” Click: Open
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 5
Change the dimensions and the position of the blueprint as shown in the picture (The scale calculations are already done for you) Select “Full image” in the Transparency tab and change the transparency into 0,40 Click OK Click at the Front Plane and drag at the corner balls to increase the Plane size as shown in the picture
Close the sketch
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 6
Change the name of Sketch1
Click on Sketch1 in the feature tree twice (slow, no double click)
Change the name into: BLUEPRINT_FRONTVIEW
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 7
Create a new sketch on the Right Plane Select the Right Plane in the Feature Manager
Click at the 2D Sketch icon to make a new sketch Go to: Tools > Sketch Tools > Sketch Picture Browse to the YachtTutorial map: Blueprints > Select “Blueprint_Side.PNG” Click: Open
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 8
Change the dimensions and the positions of the blueprint as shown in the picture Select “Full image” in the Transparency tab and change the transparency into 0,40 Click OK Click at the Right Plane and drag at the corner balls to increase the Plane size as shown in the picture
Close the sketch
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 9
Change the name of Sketch2 Click on Sketch2 in the feature tree twice (slow, no double click)
Change the name into: BLUEPRINT_SIDEVIEW
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 10
Create a new sketch on the Top Plane Select the Top Plane in the Feature Manager
Click at the 2D Sketch icon to make a new sketch Go to: Tools > Sketch Tools > Sketch Picture Browse to the YachtTutorial map: Blueprints > Select “Blueprint_Bottom.PNG” Click: Open
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 11
Change the dimensions and the positions of the blueprint as shown in the picture Select “Full image” in the Transparency tab and change the transparency into 0,40 Click OK
Close the sketch
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 12
Change the name of Sketch3 Click on Sketch3 in the feature tree twice (slow, no double click)
Change the name into: BLUEPRINT_BOTTOMVIEW
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 13
Change the name of the Top Plane
Click on the Top Plane in the feature tree twice (slow, no double click)
Change the name into: Bottom Plane
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 14
Create a new plane
Go to: Insert > Reference Geometry > Plane or click at the New Plane icon
First Reference : Select the Front Plane
Change the Offset Distance into: 32920 mm Click at the Flip option to flip the offset direction of the Plane Click OK
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 15
Change the name of Plane 1
Click on Plane1 in the feature tree twice (slow, no double click)
Change the name into: Back Plane
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 16
Create a new sketch on the new Back Plane Select the Back Plane in the Feature Manager
Click at the 2D Sketch icon to make a new sketch Go to: Tools > Sketch Tools > Sketch Picture Browse to the YachtTutorial map: Blueprints > Select “Blueprint_Back.PNG” Click: Open
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 17
Change the dimensions and the positions of the blueprint as shown in the picture Select “Full image” in the Transparency tab and change the transparency into 0,40
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 18
Select “Flip Horizontally” to make sure that the ship horns are at the same side as in BLUEPRINT FRONTVIEW Click OK
Close the sketch
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 19
Change the name of Sketch4 Click on Sketch4 in the feature tree twice (slow, no double click) Change the name into: BLUEPRINT_BACKVIEW
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 20
Create a New Plane
Go to: Insert > Reference Geometry > Plane or click at the New Plane icon
First Reference : Select the Bottom Plane
Change the Offset Distance into: 10000 mm Click OK
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 21
Change the name of Plane2 Click on Plane2 in the feature tree twice (slow, no double click)
Change the name into: Top Plane
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 22
Create a new sketch on the new Top Plane Select the Top Plane in the Feature Manager
Click at the 2D Sketch icon to make a new sketch Go to: Tools > Sketch Tools > Sketch Picture Browse to the YachtTutorial map: Blueprints > Select “Blueprint_Top.PNG” Click: Open
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 23
Change the dimensions and the positions of the blueprint as shown in the picture Select “Full image” in the Transparency tab and change the transparency into 0,40 Click OK
Close the sketch
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 24
Change the name of Sketch5 Click on Sketch5 in the feature tree twice (slow, no double click) Change the name into: BLUEPRINT_TOPVIEW
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 25
Change the name of the Right Plane Click on Right Plane in the feature tree twice (slow, no double click)
Change the name into: Mid Plane
Change the order of the Planes and Sketches for a better overview Select the Back Plane and drag it to above as shown in the picture
Select the Top Plane and drag it to above as shown in the picture
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 26
Save your file
Click at the Save icon Give your file the following name: Blueprint_Setup
Congratulations, well done!
You have just read this third eBook, you’ve installed your own yacht blueprints in SolidWorks and you know you can dramatically improve your
SolidWorks modeling skills by SolidWorks tutorials like this one.
That’s why you’re going to love my full SolidWorks yacht tutorial. In this eBook package (totaling 1275 pages) I will show you exactly how to
model this complete 108 ft. yacht in SolidWorks to make you a SolidWorks Pro in the shortest possible time.
This step for step training course literally takes you by the hand and walks you step by step into becoming a SolidWorks Pro in a fast and fun
way. If this sounds good to you, simply click the link below to find out more:
www.YachtTutorial.com/launch.html
Copyright © 2014 by J.W. Zuyderduyn www.YachtTutorial.com - How To Model a Yacht in SolidWorks®? Page | 27
In the next (premium) tutorial you will learn how to model Part I of the Hull in SolidWorks.