Upload
dominh
View
213
Download
1
Embed Size (px)
Citation preview
I N T E R N A T I O N A L
Product Catalog
EMERGENCY COMMUNICATIONS
LOAD WEIGHING SYSTEMS
BARRICADE SYSTEMS
ELEVATOR MAINTENANCE SUPPLIES
K ‐ T e c h
When our security phones were selected by the Office of the Architect of the Capitol
for the new Capitol Visitor Center in Washington, D.C., we stepped back and thought
about the remarkable journey that has brought us where we are today. More than thirty
years ago, when K-Tech International began, we ran our operation out of a garage.
Today, we have a research and development team that is staffed by some of the best
engineers in the industry. We have a testing lab that other companies only dream
about. And, we have products installed in buildings like the U.S. Capitol, the Pentagon,
the University of Connecticut, and other similarly prominent places all over the world.
Our security phones, load-weighing systems, and barricades have set new standards
for the market place. All of our products are proudly made in the USA. Our Tech-
support also is US-based, free, and rivaled by none. In 2010, we demonstrated just how
confident we are in our products by adopting a no-questions-asked, 3-year warranty.
We grew to become what we are today by a simple formula: faith, hard work,
ingenuity, and putting our customers first.
We welcome your decision to benefit from our remarkable and blessed journey.
Sam Massameno
President
Introduction
CONTENTS 3 3 3
www.KTechOnLine.com 1.800.993.9399
Emergency CommunicationsEmergency CommunicationsEmergency Communications
Power: Phone Line or AC ................................................................................. 4 Features & Mounting Styles ............................................................................. 5 OEM COP Mount Phone .................................................................................. 6 SUREcom.......................................................................................................... 6 Keypad Speakerphone...................................................................................... 7 Outdoor Phone.…............................................................................................. 7 Elevator Phone Replacements.......................................................................... 8 Accessories / Parts............................................................................................ 9
Elevator Load WeighingElevator Load WeighingElevator Load Weighing
Strain Gauge Technology.................................................................................. 10 Rope Sensors / Floor Sensors………………………………………………………………………. 10‐11 Competitive Advantage.................................................................................... 11 Installation....................................................................................................... 12 Specifications................................................................................................... 12 Parts………………….............................................................................................. 13
Maintenance BarricadesMaintenance BarricadesMaintenance Barricades
Interlocking 42” (10 mm)....................... ......................................................... 14 Accessories....................................................................................................... 14 Interlocking 42” (6 mm).................................................................................... 14 Helpful Information………………………………..……………………………………………………. 15
New and Improved ProductsNew and Improved ProductsNew and Improved Products
The (Elevator) Bag ……….................................................................................... 9 The Activator for efficient elevator control ………………………………………………….. 11 Tube Barricades ................................................................................................ 15 Limited Use Barricades ..................................................................................... 15
* Prices in this catalog are subject to change without prior notice. Before placing your order,
contact us to see whether you qualify for contractor or quantity pricing.
Phone Line:
ET401: 24‐48 VDC 30 mA
ET901: 11‐48 VDC 15 mA
Power Requirements:
ET401: phone line
ET901: 120 VAC 50 mA
(Ni‐MH backup battery included)
Wiring:
20 AWG shielded twisted pair
Registrations & Approvals:
FCC, IC & CSA, UL approved (ETL)
ADA and ASME A17/B44 compliance
K‐Phone ET401 Single Phone / Single Line
Phone line powered
SUREphone ET901 Multiple Phones / Single Line
AC powered
Elevators
Wheelchair Lifts
Areas of Rescue
Parking Garages
Hallways
Poolside
Entry
Security
Campus
Gated areas
K‐Tech phones meet all cur‐
rent ADA and A17.1/B44
Elevator Safety standards by
providing the built‐in features
necessary to promptly connect,
identify, and respond to emer‐
gency calls for assistance.
The momentary press of the
phone activating button puts it
all into motion. An automatic
dialer is provided to dial out to
an emergency location. In
buildings that are not manned
24/7, multiple phone numbers
(up to 5) can be programmed
that will sequentially cycle
through if there is no answer or
a busy signal is detected. The
two recordable voice messages
are used to identify location and
provide any dispatch and/or
other information specific to
the site. Selectable, automatic
or programmable shut‐off
methods ensure units are al‐
ways ready for the next call.
The well thought‐out design
provides for programming
through either the built‐in key‐
pad or remotely from any
touch‐tone phone. Voice
prompted programming steps,
which immediately repeat for
verification, make programming
the phone simple.
The SUREcom intercom mod‐
ule completes the product line
for installations requiring Ma‐
chine Room to Elevator commu‐
nications (See Page 6).
Specifications
Emergen
cy Communicatio
ns
www.KTechOnLine.com 1.800.993.9399
4 4 4
Five number automatic dialer
Two voice announcement messages
Built‐in keypad & remote programming
Voice prompted programming
Automatic & programmable shut‐off
Non‐volatile memory
Metal push button
Braille label & Visual Indicator
Features
www.KTechOnLine.com 1.800.993.9399
Emergen
cy Communicatio
ns
Fortress Flush Mount . . . Use it to upgrade cabinet mount units or to simply replace old or
damaged phone cabinets. Also, the Fortress is ideal for adding a phone where there is
no phone cabinet. (A17.1‐2004 requires that the activating button and visual indica‐
tor be “visible” and marked as “HELP.”)
Available in #4 brushed stainless steel or Muntz. (Muntz)
Plate sizes: 12.5” H x 10” W x .125” Th
10.5” H x 6.5” W x .125” Th
Cutout: 7 3/4” H x 5” W x 2” D
Custom sizes and other finishes available
ET1401A One Phone / Line (12.5” x 10”) (phone‐line powered) $329 ET1901A Multiple Phones / Line (AC powered) $359
Add ‐ S 10.5”H x 6.5” W Brushed S.S. Add –B Bronze / Muntz
Add –WP Weather Protected
Sentry Box Mount . . . Fits right into most existing telephone cabinets.
Available in Brushed Aluminum or Red.
Size: 7.5” H x 5.0” W x 2” D
ET401A One Phone / Line $229 ET901A Multiple Phones / Line $259
Add –WP Weather Protected Add –WE Weather Enclosed
Liberator Low Profile Surface Mount . . . Ideal for installations where space is limited
or cutting a hole is not possible or economical.
Available in #4 brushed stainless steel and muntz.
Sizes: 6.75” H x 6.25” W x 1” D New size
ET401A‐LPSS One Phone / Line $259
ET901A‐LPSS Multiple Phones / Line $289 Add –WP Weather Protected
Mounting styles . . .
New Smaller
Size!
5 5 5
OEM Plate Mount Phones
The Universal Commander perfect field replacement
same features and functions as other K‐Tech phone models (see pages 4 & 5)
fits most fixture grille and mounting patterns
available for single or multiple phones on one line
integrated transformer mounted to the faceplate
a seamless solution to replacing or upgrading fixture mount phones
also available in new fixtures: specify the K‐Tech Universal Commander on all of your new elevator fixture orders (no additional fixture prep time required)
ET401A‐OEM One Phone / Line $229 Add—CS Center Speaker
ET901A‐OEM Multiple Phones / Line $259 Add –CM Center Microphone
SUREcom
A low‐cost solution for communications from the Machine Room or Lobby to elevators.
Meets the “call‐in‐progress override” required in the latest code A17.1.
Supports 1 to 4 remote stations and up to 10 K‐Tech phones.
Allows contact with one or all elevators on the system from each remote station.
Sharing of elevator emergency phones and wiring makes the SUREcom an economical choice.
ET92A SUREcom w / 1 Handset Station $299
ET105 Handset Station $40
ET401A‐OEMU One Phone / Line $229
ET901A‐OEMU Multiple Phones / Line $259
www.KTechOnLine.com 1.800.993.9399
Emergen
cy Communicatio
ns
Size: 9.5” x 4.75” x 1.5”D
Universal
Commander Commander
6 6 6
KEYPAD SPEAKERPHONE
Plate Size: 8” H x 4” W Cut‐out: 7” H x 3.5” W x 1” D
The Keypad Speakerphone is the premium
emergency communication solution for the
home elevator. The unique flush mount
design can be made to perfectly match the
elevator décor. It eliminates the need for a
hinged door cabinet and there is no
unsightly, dangling handset to contend with.
Robust, yet distinctive, something to
compliment your fine cab finish (available in
custom finishes).
Ask your fixture manufacturer to integrate
the OEM model in your next home elevator
fixture order. It’s small enough for even the
most compact fixture. ET301‐OEM $139 Mount Behind COP
ET1301 $169 Brushed Stainless Flush Mount
Parking Garage
Campus
Poolside
Entry
Security
Gated Areas
Outdoor Access Lifts
Emergen
cy Communicatio
ns
www.KTechOnLine.com 1.800.993.9399
Size: 6.5” H x 3” W x .70” D ET301‐LP $170 Brushed Stainless Surface Mount
Size: 7.75” H x 3.25” W x 1.0” D
Nautilus NOW an all weather phone
that is really all weather
A price that can’t be beat
Line powered
Programmed remotely
ADA compliant
Simple to install
Completely sealed to
weather
Three‐year warranty
ET401A‐WS $269
ET1301B‐C $250 Bronze‐Muntz Flush Mount
Manuals
K‐Phone ET
401
K‐Phone ET 401
Need a manual?
Just let us know. We have individual
manuals for every product we sell.
7 7 7
ELEVATOR PHONE REPLACEMENTS With more than 20 elevator phone manufacturers and 100+ phone models manufactured over a 25 year
period, finding the right replacement ADA elevator phone can be a costly and time‐consuming task. Let
K‐Tech simplify the process and greatly reduce your costs of replacing emergency phones.
K‐Tech’s new PhoneFinder data base cross‐references manufacturers and model numbers to comparable
K‐Tech phone models. Most of our phones will fit right into your installation, without any mechanical field
mounting or wire connection modifications.
Emergen
cy Communicatio
ns
www.KTechOnLine.com 1.800.993.9399
PCB Phone Board
Company Model # K‐Tech model #
EMS PBX ET401A
PNB ET401A‐OEMU
PSS ET1401A‐S
RATH 2100‐956SS ET901A
2100‐957RA ET901‐OEM‐OS
TRE as3bb ET401A
as3mini ET1401A‐S
As3sm‐1 ET401A‐OEMU
WURTEC 11‐580 ET401A
11‐903 ET901A‐OEMU
OTIS MG3/26800ALD ET401LPC‐KT
ET‐401LPC‐KT $225 (replaces many OEMs)
Phone Parts
LBL369 $10
Transformer
AC Transformer for ET901 Series SUREphone
Mounts to phone faceplate
Raised Symbol/Letters and Braille Adhesive‐backed
Size: 3.125” H x 2.25” W x .125” D
Batteries
ET‐508SPK $15
Speaker / Microphone / LED Braille Label
8 8 8
ET‐505MIC $10
ET‐502LED $8
ET‐BTY002 $10
ET‐BTY007 $20
ET‐503BTY9V $20
ET‐501TRN $20
PHONE ACCESSORIES
www.KTechOnLine.com 1.800.993.9399
Emergen
cy Communicatio
ns
Many states and cities across the US are adopting the new ASME code requiring phone line monitoring. That means that, if you lose power to your phone line, on‐site personnel need to know about it through both a visual and an audible signal.
We've developed a low‐cost, simple and effective method of complying. When a phone line goes down, our ET901A‐AM series phones send a signal through a relay to our ET98 Line Loss Indicator (usually mounted in the machine room). The ET98 sounds an audible warning and activates a warning light in our ET98‐LD Line Loss Display Panel (usually mounted in the lobby or hall). Our ET98 can handle up to eight ET901A‐AM cab phones with individual LEDs that tell you exactly which lines are malfunctioning.
New! Line Loss Indicator
Line Loss Indicator Code compliant Lobby monitor panel
ET901A $259
Surge Protector
the (elevator)
bag
9 9 9
Introducing
Introducing
Introducing.........
Elevator service in a bag
Everything you need (over 50 items)
From oils to tools to caution tape
No more time‐losing trips to truck
Connects to the phone line in the machine room and diverts high voltage surges safely to ground. The gas fuses protect against multiple surges and are easily replaceable. Size: 3.5” H x 3” W x 2” D
ET98‐LD $195
ET98‐LD $150
ET‐SP $20
TS‐200 $549
Load
Weigh
ing
www.KTechOnLine.com 1.800.993.9399
LOAD WEIGHING
Through the years, those looking to accurately weigh anything, large or small, have relied on strain gauge technology for accuracy and long‐term reliability. Using this superior, time‐tested method of weighing, the K‐Weigh™ provides a universal and cost‐saving answer to even the most complex elevator load weighing environments. It is ideal for both modernizations and new construction of isolated and non‐isolated elevators. The K‐Weigh™ provides information to the controller necessary to optimize elevator traffic flow and improve passenger safety and comfort.
WHAT CAN A K‐WEIGH™ DO FOR YOUR ELEVATOR?
Optimize Traffic Flow
Hall Call Bypass
Anti‐Nuisance
Light/Heavy Load Dispatch
Provide a Smooth, Comfortable Ride Motor Pre‐torque
Ensure Passenger Safety
Equipment Protection
Child Safety
Overload Protection
Reduce Maintenance
Conserve Energy
Fewer starts and stops
Smooth take‐offs and stops
NOTE: Some features are controller‐ dependent.
What’s the difference? LOAD WEIGHING SYSTEM CHECKLIST
Feature K‐Weigh Other*
Analog signal (variable voltage) models with HIGH capacity Yes ?
Set‐Point signals (N/O, N/C dry contact) models Yes ?
Auto‐Zero reset automatically maintains systems settings Yes ?
Comes complete with all parts (even drill bit) needed for installation Yes ?
Selected by several manufacturers as part of their controller package Yes ?
Backed by 30 years of in‐house experience in engineering,
production and support
Yes ?
Opportunity to work with product designer and manufacturer Yes ?
CSA & UL Approvals (ETL) Yes ?
3‐year Warranty Yes ?
U.S. made with free U.S. tech‐support Yes ?
* “Other” systems features may vary and can include proximity sensor, rope tension sensor, load cells, etc. Check with the manufacturer.
Easy to install: smaller sensor, 3/8” holes, drill bit provided Yes ?
New lower price Yes ?
101010
Rope Sensors Cross‐head Sensors
Going down?
In a tough economy, everyone expects prices to go up as quality goes down. We defy expectations. We figured out how working smarter could result in prices going down as quality is maintained. Check out our new, lower prices.
New!
www.KTechOnLine.com 1.800.993.9399
Load
Weigh
ing
K‐Weigh™ Model # (Senor type)
Output Type
Hanging Weight
In‐Car Load
No. of Sensors
LW5201 (cross head)
A X X 1
LW5202 (cross head)
A X X 2
LW5201S4 (cross head)
A & B X X 1
LW5202S4 (cross head)
A & B X X 2 LW5201‐RSI (rope)
A X X 4
LW5202‐RS2 (rope)
A X X 6
LW5201‐S4‐RS1 (rope)
A & B X X 4
LW5202‐S4‐RS2 (rope)
A & B X X 6
*K‐Weigh™ auto‐zero reset automatically maintains system settings
With all the clamor and claims of marketers, you’re left with the basic question whether there’s a real difference among the various load‐weighing systems on the market.
There are several:
Our new crosshead sensors are easier to install and backed by over 30 years of product enhancement
Our rope sensors are high capacity (whereas many competitors sell low capacity), much easier to install, and won’t break or malfunction be‐cause of capacity issues
Both sensors are less expensive
Both sensors are made in the USA, backed by a 3‐year warranty and free tech support.
Have you checked the
second price tag lately?
Every product that we (and our competitors) make has two price tags: one when you purchase and the second, which you pay later. The second is made up of installation problems, performance failures, and replacement costs. Other manufacturers of emergency phones and load-weighing systems don’t talk a lot about the second price tag, because it can add up. Complex installations, low quality component parts, and shoddy workmanship, added to the unavailability of replacement parts, all cost you money.
We’ve been around for over thirty years. The quality of our products is legendary. Our tech-support is free. And, we have a 3-year warranty.
Check out the second price tag.
111111
We know that building owners are getting complaints about elevators whose by‐pass, anti‐nuisance, and overload systems are not working right. Perhaps, you think that the only option for them is a complete (and expensive) overhaul. It isn’t.
We’ve come up with an affordable solution: The Activator. It activates your controller’s inherent potential to operate at peak efficiency.
Don’t you just love an idea whose time has come?
Need a quick fix for elevator inefficiency?
Now you have one!
Why choose K‐Tech?
ET‐505MIC
$399
$545
$375
$545
$695
$545
$695
MODELS AND FEATURES PRICE
LOAD W
EIGHING
www.KTechOnLine.com 1.800.993.9399
Load Weighing Installation Made Simple!
Identify the proper mounting location for one or two sensors.
File surface area under sensor.
Periodically reset amplifier Zero — automatic or manual.
Mount enclosure; Connect AC.
Adjust amplifier Zero and Gain.
Calibration and Set Up
121212
Mark for, and drill holes; install senor using the bolts provided.
signal output cable
Cross‐head sensors Rope sensors
1. Remove screw from collar and place the collar on the rope.
4. Using a #5 Allen wrench, tighten set‐screw into the dimple located on the sensor.
2. Return screw and tighten to secure collar around rope.
3. Slip sensor through collar.
Repeat these steps for all rope sensors.
junction box.
CC
CC
1 2 3
Connect rope sensor USB cables to junction box.
Connect output cable to USB hub & PCB.
LOAD WEIGHING PARTS
www.KTechOnLine.com 1.800.993.9399
Load
Weigh
ing
Parts for LW5200 Series Load Weighing
Sensor Replacement
Includes: Sensor, Mounting Hardware
LW42SENKIT $195
Sensor and Bolt Kit Includes: Sensor, Mount‐ing Hardware and dual purpose Drill Template / Sensor Guard
Sensor Bolt Hardware Kit
Includes: Mounting Hardware and dual purpose Drill Tem‐plate / Sensor Guard
LW‐42SENKIT $195
Parts for LW4200 Series Load Weighing and earlier
Enclosure: NEMA Type 1 (standard) 8.75” H x 4.625” W x 2.25” D (222 mm x 118 mm x 57 mm) (with flange) SENSORS: 1” H X 7” W X 1/4” D (26 mm x 178 mm x 6.4 mm) bar; 8 foot (2.4 m) cable Power Input: 100 to 240 VAC, 47‐63 Hz; 0.15 A @ 115 VAC; 0.07 A @ 240 VAC Optional DC Voltage (call) Output: 0 to 10 VDC (Standard High Output) 0 to 5 VDC (Standard Low Output NO/NC dry contacts (Set‐Point system) Please call for other output options Resolution: < 50 lbs (< 23 kg) or 2% Repeatability: +/‐ 2 % (2 sensors), +/‐ 5% (1 sensor) Temperature: 32 to 158° F (0 to 70° C)
Humidity: 20 to 85% non‐condensing Drift/°F: 0.3% of FS (typical, without Auto Reset) Zero Reset: < 1%
Correction: +/‐ 200% offset Input: 100—120 VAC ground (pull down)
Automatic Cable Compensation (In car load) Input: NC to ground signal with elevator door
Closed (NO with door open) Set‐Point Module Adjustments: 0 to 100% of maximum load Output: Four independent DPDT NO/NC contacts
Rated 5A—28 VDC; 1/4 HP—120 VAC
Approvals: ETL (UL & CSA) Safety Conforms to ASME Std. A17.5 Certified to CAN/CSA std. B44.1
LOAD‐W
EIGHING SP
ECS
Contact us for correct model for your application
LW520‐RS1 (4 rope sensor kit) $300
131313
LW‐SENGDKIT $20
Bear‐i‐cade™ light weight (3.5 lbs.) panels Protect pedestrians from hazardous areas Made of rugged, 10 mm or 6 mm thick corrugated
poly‐propylene ANSI approved bright yellow color and black graph‐
ics “CAUTION” with a universal symbol for stop Flat bottom edge keeps tools and hardware from
straying out of the work area 36” wide panels can be interlocked to form any
width or shape 42” high panels lock and anchor as required by 2010
Field Employee Safety Handbook Bear‐i‐cade™ Locks keep the panels rigid by locking
into the barricade panel providing a snug, non‐slip fit
Bear‐i‐cade™ Anchor Kit securely attaches the safety barricade to escalator balustrades, elevator entrance frames or other smooth surfaces
Custom printing available
MAINTENANCE BARRICADES
Main
tenance B
arricades
www.KTechOnLine.com 1.800.993.9399
Lock
Anchor
BI42 $63 Single Panel 42” H x 36” W x 10 mm T BI42‐3K $203 3 Panel Set w/2 Anchors & 2 Locks (10 mm) BI42‐4K $265 4 Panel Set w/2 Anchors & 3 Locks (10 mm) BI10L $10 Barricade Lock BI325AK $30 Barricade Anchoring Kit
10 mm Bear‐i‐cade™
BI426 $50 Single Panel 42” H x 36” W x 6 mm T BI426‐3K $170 3 Panel Set w/2 Anchors & 2 Locks (6 mm) BI426‐4K $221 4 Panel Set w/2 Anchors & 3 Locks (6 mm) BI6L $10 Barricade Lock BI325AK $30 Barricade Anchoring Kit
6 mm Bear‐i‐cade™
Heavy Duty Interlocking 42” High
Apartment houses
Factories, offices
Schools
Malls, stores
Hospitals—senior homes
Cruise ships
Consider the Many Applications
141414
72” High72” High72” High
BI72 $139 Single Panel 72” H x 36” W x 7/16” T
42” High42” High42” High
BI426 $50 Single Panel 42” H x 36” W x 1/4” T
LightLightLight‐‐‐weight Interlockingweight Interlockingweight Interlocking
www.KTechOnLine.com 1.800.993.9399
Main
tenance B
arricades
151515 New MAINTENANCE BARRICADES
Our designers have been busy developing two new barricade systems: The Tube Barricades and the Limited Use Barricades. With lower price points but the same great quality and portability, these barricades will work for you without breaking your budget. The Limited Use Barricades are made of a sturdy, corrugated, card‐board material. Both are lightweight and highly visible.
Helpful information is at your fingertips twenty‐four hours a day. K‐Tech’s web site contains everything you need from sales literature to technical support. New products and updates are displayed there first.
Sales Sheets All K‐Tech products have sales sheets downloadable in PDF form from the web site. No prices are shown so you can feel comfortable e‐mailing a link to your customer. Or, print out information in color for that last‐minute sales presentation.
E‐mail Requests Send in a catalog request, spec out a K‐Weigh Intelligent Load Weighing System right from your desk, or just ask a question; you can do it all through KTechOnline.com . Send your request any time of day or night and receive an answer the next morning.
Programming and Installation Instructions Now, you or your mechanics can download programming instructions for all K‐Tech products 24/7. Along with the instructions, get technical tips and specifications to ensure the job is done right the first time.
Technical Support If your questions cannot be answered using the comprehensive and constantly updated user manuals, you can go to our web site, which is open 24/7. Also available to our customers is toll‐free telephone support during normal business hours: 8:00 a.m. to 5:30 p.m., Eastern time, Mon.—Fri.
Warranty K‐Tech International, Inc. warrants products it manufactures to be free from defects in material and workmanship for a period of three years from date of sale to final user. Other terms are set out at our website.
Repair K‐Tech maintains a quick turn‐around repair department. Please call for a Return Authorization Number when repairs are required.
Replacement Parts K‐Tech has been providing replacement parts to its customers for over thirty years. (Remember, nickel‐metal hydride batteries and other similar products should be properly disposed of.)
Helpful InformationHelpful InformationHelpful Information
TUBE BARICADES
BI42T‐3 $120 (3 panel set) BI42T‐1 $40 (single panel)
LIMITED USE BARICADES
BI42C‐3 $21 (3 panel set)
800.993.9399 www.KTechOnline.com
Proud to be
part of: We accept:
03/15
We are honored to have our phones chosen for use in the Freedom Tower.
The selection means that we are a very real part of this majestic affirmation
of the values that have made our Country great.
We never forgot.