innovative solutions for global uselighting

On our website www.stahl.de we provide you with comprehensive details of our lighting

technology and other product data. To obtain the desired information rapidly, you are best

to use our product webcode, and you will find that information in this brochure for every

product. This is how the WebCode search function works: just enter the WebCode at the

top right of our website.

2

WebCode information

3Great Ideas, Reliable Solutions, Perfect Lighting: R. STAHL!

Do you need reliable and safe lighting solutions for rough operating conditions and areas at risk of explosion?

Our innovative and internationally certified products will delight you with their:

- efficiency - ease of maintenance - vibration resistance - seawater resistance - broad temperature range

On the next few pages, discover our:

- linear luminaires - tubular light fittings - floodlights - hand lamps - compact light fittings - emergency lighting / central battery units - individual turnkey solutions - software for lighting planning

4Germany: Lighting system promotes safety in the chemical industry The existing lighting in a chemical plant failed to deliver the recommended lighting

intensity defined in standard DIN EN 12464-1 Lighting of workplaces - workplaces in

interior locations. In response to this, R. STAHL created a new lighting concept. The

linear luminaire EXLUX 6400 satisfies the requirements for various different working

areas. Good lighting enables production operations to run without malfunction, and labels

are identified with a zero error rate. Good visibility of stairs and obstacles contributes to

passive health & safety at work (H&SW).

Italy: 10-fold service life at extremely high ambient temperatures

Due to high ambient temperatures and the lamp technology employed, the service

life was less than 5,000 operating hours. Our ingeniously designed driver technology

with temperature management in our LED luminaires enables these systems to be

used in high ambient temperatures. Even at +70C the service life of the LED pendant

light fitting 6050/5 and that of the LED tubular light fitting 6039 can last up to 60,000

operating hours.

Germany: LED lighting technology for heavy land-based drilling rigs

Land-based drilling rigs suitable for global operation need to have specialist lighting

technology. The luminaires must cover a broad temperature range, must be space-

saving, and resistant to vibration and seismic movement. The slimline LED tubular

light fittings 6036 and 6039 are pre-destined for this kind of application. They are easy

to install, are virtually zero-maintenance units and are characterized by their

long service life.

5Global ProjectsSuccess stories from R. STAHL

Australia: Inspection in plant reduces on-site cost

Explosion-protected products with ignition protection status nR (restricted breathing)

require a vacuum test to be conducted after installation. We developed an nR solution

that greatly simplifies the on-site installation work for the operator. This solution is

used e.g. in our pendant light fitting 6470. After installation of the lighting, all that is

required is a visual inspection.

India: LED linear luminaires combine cost savings with future-proofing.

Our new LED linear luminaires EXLUX 6002, zone 1 and EXLUX 6402, zone 2 are con-

vincing with a service life of up to 100,000 operating hours and illumination efficiency

of 115 lm/W. At consistent illuminance and reduced current intake, the LED linear

luminaire replaces its counterpart for fluorescent lighting.

6Bright, Brighter, LED!R.STAHL Lights in tune with the latest trends

Ever since the efficiency of white LEDs has exceeded the efficiency of conventional light sources, R. STAHL has been offering also LED luminaires for general lighting. Apart from explosion protection, state-of-the-art solutions for light sources and electronic equipment play a decisive role.

LED luminaires from R. STAHL have a large number of tangible benefits that are unique on the market. Consider in particular the facts that are important for your system, such as service life, efficiency, weight and temperature range!

7LED Inspection Light 6149/2

LED Portable Lamp 6148

LED Tubular Light Fitting 6036

LED Linear Luminaire 6002

LED Tubular Light Fitting 6039

LED Pendant Light Fitting 6050

Very economical

Very economical

Very economical

Very economical

Very economical

Very economical

Low maintenance

Low maintenance

Low maintenance

Low maintenance

Low maintenance

Low maintenance

Light- weight

Light- weight

Light- weight

Light- weight

Light- weight

Light- weight

Extreme temperatures

Extreme temperatures

Extreme temperatures

Extreme temperatures

Extreme temperatures

Extreme temperatures

Long service life

Long service life

Long service life

Long service life

Long service life

Long service life

Page 16 Page 9 Page 15

Page 16 Page 8 Page 8

LED

LED LED LED

LED LED

LED Tubular Light Fittings & Linear Luminaires

8

LED Tubular Light Fitting 6036

LED Tubular Light Fitting 6039

WebCode 6036A

WebCode 6036A

The versatile pioneer among LED lighting: 6036 LED tubular light fitting

The LED tubular light fitting 6036 is a very lightweight and vibration- resistant light with high-performance LEDs based on an innovative design. Nevertheless, it is characterized by outstanding ruggedness. In everyday working life, they can be used as general lighting. The LED tubular light fitting 6036 is distinguished by an extremely long service life and very low weight.

The smallest LED tubular light fitting

The LED tubular light fitting 6039 is at the same technological status as the LED tubular light fitting 6036. Its advantage lies in the different variants of connected load. It is available for 12 V DC, 24 ... 48 V AC/DC and 110 ... 240 V AC/DC.

-40 C ZONE 2/22

+60 C ZONE 1/21

-40 C ZONE 2/22

+70 C ZONE 1/21

LED

LED

9LED Linear Luminaire EXLUX 6002

WebCode 6002A

The EXLUX 6002 linear luminaire is the new flagship product, equipped with LED high-performance technology.

This luminaire combines all of the advantages of safe and economical illumination of zones 1 and 21: at the same lighting intensity and lower power intake, the LED linear luminaire replaces its counterpart for flu-orescent lamps 2 x 18 W or 2 x 36 W. At the same time, EXLUX 6002 is easy to maintain and cuts operating costs by virtue of its superlative energy efficiency.

With the compact new enclosure, weight is reduced by about one third. The robust enclosure satisfies the requirements for degree of protection IP66/67, enabling it to resist powerful jets of water and brief periods of immersion.

High-quality LED modules and the related ballast guarantee very long service life of up to 100,000 hours. Also at extreme ambient temperatures, this luminaire delivers its service with great reliability.

The EXLUX 6002 is intended for use on drilling rigs, in refineries and buildings.

With the accessories offer, a bulkhead mounting, or even as a pole mounted light fitting, are all entirely feasible options.

-30 C

+55 C

LED Tubular Light Fittings & Linear Luminaires

LED

LED Linear Luminaire EXLUX 6402

WebCode 6402A

LED linear luminaire EXLUX 6402: example with leading technology for zone 2/22

The EXLUX 6402 LED linear luminaire can be used as a bulkhead light fitting or as pole mounted light fitting. The efficient and long-life LED technology replaces luminaires with 2 x 18 W or 2 x 36 W fluorescent lamps. Thanks to its central lock and its LED module, LEDs and ballast fitted on a replaceable panel, the luminaire is extremely easy to maintain.

-30 C

+55 C

ZONE 2/22

ZONE 2/22

ZONE 1/21

LED

EXLUX 6001

Emergency Luminaire EXLUX 6009

WebCode 6001A

WebCode 6009A

The EXLUX 6001 can be installed as a bulkhead light fitting or as a pole mounted light fitting. The luminaire for fluorescent lamps is available in versions 2 x 18 W, 2 x 36 W and 2 x 58 W and serves as general lighting.

The robust generation of linear luminaires for fluorescent lamps EXLUX 6001 and 6009 certified in acc. with IECEX 60079-0 (dated 2007-10) has been designed for long-term and future-proof service. The emergency lighting variant EXLUX 6009 simplifies maintenance through automatic self-tests.

The emergency luminaire for fluorescent lamps EXLUX 6009 is availa-ble in versions 2 x 18 W and 2 x 36 W. The central lock that shuts down all terminals on the power supply can be used for replacing lamps and the battery without disconnecting the lighting from the mains. The weekly function test and the annual operating period test support maintenance. A status LED signals the status of the lamp.

10

Linear Luminaires

-30 C ZONE 2/22

+60 C ZONE 1/21

-30 C ZONE 2/22

+50 C ZONE 1/21

LEDConvertible to LED with upgrade kit

11

WebCode 6600A

WebCode 6608A/6608B

The enclosure of the linear luminaire 6600 consists of glass- fibre-reinforced polyester resin and the translucent cover consists of impact-resistant polycarbonate. Fast-acting connections enable the luminaire to open and close rapidly. Frequently, this luminaire is used for general lighting

The Economy model has an internal battery and an emergency light service of 1.5 hours. The emergency service life of the standard version is variable, with a choice of anywhere between 1.5 and 3.0 hours. An external battery box facilitates fast and simple replace-ment of the battery.

ECOLUX 6600

ECOLUX 6608

-25 C ZONE 2/22

+55 C ZONE 21

-20 C ZONE 2/22

+50 C ZONE 21

ECOLUX Metal 6010/6610

Sheet Steel Luminaire 6014/6414

Sheet Steel Emergency Luminaire 6018/6418

Sheet Steel Luminaire 6012/6412

WebCode 6010A/6610A

WebCode 6014B/6414B

WebCode 6018B/6418B

WebCode 6012B/6412B

The sheet steel light fitting 6010/6610 is equipped with a glass panel made of plastic and complies with the new IECEx standard. Its special design is particularly suitable for use on ships and platforms. The enclosure is available in the variants of powder-coated sheet steel as well as stainless steel S304 or S316.

The sheet steel luminaire 6014/6414 can be used as pendant light fitting. With available accessories, it can be used as a wall-mounted light or as a built-in luminaire.

The sheet steel emergency luminaires 6018/6418 are designed for emergency lighting service for 1.5 or for 3.0 hours. The weekly function test and the choice of annual endurance operational test facilitate maintenance work. The low-charge failsafe and the charge voltage limitation protect the battery against premature failure.

The sheet steel luminaire with an installation height of just 80 mm is ideally suited for installation in flat suspended ceilings. With accesso-ries, this luminaire can also be installed in clean rooms.

Sheet Steel Light Fittings

12

-20 C ZONE 2/22

+60 C ZONE 1/21

-35 C ZONE 2/22

+60 C ZONE 1/21

-30 C ZONE 2/22

+55 C ZONE 1/21

-35 C ZONE 2/22

+60 C ZONE 1/21

13

WebCode 6100A/6108A

WebCode 6114B/6118B

WebCode 6388A/6788A

The compact light fitting 6100 for general lighting and 6108 for emergency lighting are suitable for bulkhead mounting locations. When used as escape route lighting, these are equipped during manu-facture with a choice of escape sign. With an internal switch, the all-ter-minal switch-off on the power supply is assured whenever the lighting units are opened up.

The enclosure of the compact sheet steel light fitting is available in two variants: powder-coated sheet steel and stainless steel S304 or S316. They are equipped with the same functions as the compact light fittings 6100 and 6118 respectively.

The bulkhead light fitting 6388 is suitable for general-purpose lamps of up to 100 W and halogen incandescent lamps of up to 150 W. Connection can involve In/Out wiring. This prevents the need for installing additional junction boxes.

Compact Light Fitting 6100Compact Emergency Luminaire 6108

Compact Sheet Steel Light Fitting 6114Compact Sheet Steel Emergency Luminaire 6118

Bulkhead Light Fitting 6388/6788

Compact Light Fittings

-20 C ZONE 2/22

+50 C ZONE 1/21

-30 C

+55 C ZONE 1/21

-20 C ZONE 2

+60 C ZONE 1

14

Floodlights

Floodlight 6121

Floodlight 6521

WebCode 6521B/6521C

WebCode 6121B

The 6121 floodlight used for gas group IIC is available for halogen incandescent lamps (QT) up to 500 W as well as for sodium vapour high-pressure lamps (HST) or metal vapour lamps (HIT) up to 400 W. The externally mounted enclosure for the ballast permits applications at ambient temperatures of up to +60 C. The inclined angle can be adjusted in 15 increments. Specialist materials for reflector and glass pane increase lighting efficiency.

Floodlight 6521/4 is certified with type of protection nR. The advantage is a great selection of lighting types and lamp performance levels. Variant 6521/5 is approved for type of protection nA. The choice of lamps is restricted to 250 W or 400 W sodium vapour high-pressure lamps. The advantage is the low cost of installation and maintenance because no inspection has to be carried out for restricted breathing. The enclosures of both floodlight variants are available in powder- coated sheet steel and stainless steel S304 or S316.

-50 C ZONE 2/22

+50 C ZONE 21

-60 C ZONE 2/22

+60 C ZONE 1/21

15

Pendant Light Fitting 6050

Pendant Light Fitting 6470

Tank Inspection Light 6122

WebCode 6050A

WebCode 6470A

WebCode 6122A

The enclosure of the pendant light fitting 6050 comprises a seawater- resistance aluminium alloy. There is also the option of a powder coa-ting. In variants 6050/1 and 6050/3 there is a big selection of lighting power and lighting types. The LED pendant light fitting 6050/5 with luminous flux of 5300 lm and a total power intake rating of 65 W is particularly efficient. The combination of internal and external reflector offers a great variety of lighting patterns. Both reflectors are optional.

A particular feature of the pendant light fitting 6470 is the diverse range of variants for the enclosure cover. These offer scope for instal-ling the lighting as a pole mounted light fitting, luminaire with bulkhead boom, or as a pendant light fitting. The pendant light fitting variant can also be mounted with two brackets, directly on the ceiling or with a bracket for pivot-mounting on bulkheads.

The tank inspection light 6121 can be mounted with tilting hinges, mounting brackets or flange collars. It has a corrosion-resistant light alloy enclosure and can either have a cast connecting cable or a connection chamber. Primarily, this light is used for the illumination of storage tanks, stirred reactors, distillation columns or through-flow inspection window fittings.

Pendant Light Fittings & Tank Inspection Lights

-40 C ZONE 2/22

+55 C ZONE 1/21

-50 C ZONE 2/22

+55 C ZONE 21

-20 C ZONE 2/22

+40 C ZONE 1/21

LED

LED Portable Lamp 6148

LED Inspection Light 6149/2

WebCode 6148A

WebCode 6149B

The LED portable lamp 6148 delivers convincingly long battery service life and a lighting head that can be swivelled through 190. With a weight of less than 1.6 kg, it can be worn comfortably for an extended period. The battery, which can be recharged in 12 hours, can operate the high-beam lighting LEDs for up to 8 hours, or the low-beam lighting LEDs for up to 20 hours. Up to 2 lenses can be stored inside the porta-ble lamp. These are available in various colours. The engagement/disengagement functions, flashing and dimming of high-beam LEDs and engagement/disengagement of low-beam LEDs are selected by actuating an ergonomically fitted pushbutton.

The LED inspection light 6149/2 is suitable for connecting 12 V DC, 24 voltages ... 48 V AC/DC and 110 ... 240 V AC/DC. A locking attach-ment hook and an immobiliser inhibit in the handle help the user to direct the light beam for the illumination task. The use of high-quality LEDs guarantees long service life.

16

Hand Lamps

16

-20 C ZONE 2/22

+50 C ZONE 1/21

-40 C ZONE 2/22

+60 C ZONE 1/21

LED

LED

190

17

LED Hand Lamp 6141/61

LED Hand Lamp 6141/62

WebCode 6141B

WebCode 6141B

The hand lamp 6141/61 for alkaline batteries with degree of protection IP 68 is in possession of ATEX and IECEx approval. The lamp used is an LED.

This hand lamp is extremely compact and very lightweight.

The hand lamp 6141/62 for alkaline batteries with degree of protection IP 68 is waterproof and is in possession of ATEX and IECEx approval. The lamp used is an LED.

This model is characterized by a longer LED service life and a higher luminous intensity.

-20 C ZONE 2

+40 C ZONE 1

-20 C ZONE 2/22

+40 C ZONE 1/21

LED

LED

Emergency Lighting Technology Group and Central Battery Units

18

System Circuit Diagram for FZB Central Battery

19

FZB Central Battery Unit

Group Battery System

The FZB range of central battery units provides the controllers for your safety technology. The freely programmable system permits flexible design and simple installation with adaptation for optimum switch variants for your general lighting. Plug-in end current circuit modules guarantee redundancy and safety. The connected safety technology is individually addressed or current-monitored and are continuously monitored by the system.

The compact, freely programmable, microprocessor-controlled group battery system defined in accordance with DIN VDE 0108-100 is suitable for individual and group monitoring of lighting. The system can be designed for one-hour or three-hour operation. The safety and escape symbol lighting is checked automatically and the result is saved in the electronic inspection log.

20

Installation Equipment

R.STAHL offers one of the widest product ranges of explosion- protected components and equipment for the supply, connection and distribution of electrical power. We supply certified products for a vast and diverse range of installation technologies. Our portfolio offers you suitable installation accessories for connecting all lights.

21

3 1 5

6

7

42

1 Switch ConSig 8040, large rotary actuator, lockable2 Installation switch 80303 Switch ConSig 8040, small rotary actuator4 Switch ConSig 8040, pushbutton5 Junction box 81186 Terminal box Ex d aluminium 82527 Plug and socket device 8570

ID 220122 Version 1.0 Printed in Germany

ezyLum

Explosion Protection by R. STAHL

System requirements> Processor: P IV or later> Frequency: 1.4 GHz or faster> Main memory: 1GB RAM> Graphic card: OpenGL able graphic card> Resolution: 1280 x 1024 px

Supported operating systems> Windows Vista> Windows XP> Windows 7

R. STAHLNordstrae 1099427 Weimar GermanyT +49 03643 4324

Lighting Design Software

www.stahl.de

ezyLumLight calculation using R.STAHLs planning software

22

During the planning phases of construction projects and/or the modernization of industrial facilities, lighting is increasingly becoming a focal point of attention. The aim of lighting is to provide assistance to human activities and it is therefore governing by defined standards and guidelines. With ezyLum and our plug-in catalogue, you will obtain the optimum calculation for your lighting needs. You can also obtain a free software and plug-in catalogue from www.stahl-ex.com.

23

ID 220122 Version 1.0 Printed in Germany

ezyLum

Explosion Protection by R. STAHL

System requirements> Processor: P IV or later> Frequency: 1.4 GHz or faster> Main memory: 1GB RAM> Graphic card: OpenGL able graphic card> Resolution: 1280 x 1024 px

Supported operating systems> Windows Vista> Windows XP> Windows 7

R. STAHLNordstrae 1099427 Weimar GermanyT +49 03643 4324

Lighting Design Software

www.stahl.de

R. STAHLs convenient ezyLum software allows you to plan lighting indoors and outdoors (incl. street lighting). It allows you to reproduce any building geometry and various lighting scenarios. Whether you want to import drawings or export the planned lighting: ezyLum contains time-saving functions in 26 languages.

Our support team will be pleased to plan and support you.

With our plug-in catalogue including filter functions, you remain at the latest status.

The export function enables you to transmit lighting data to ezyLum in German or English (other language versions are being produced at this time).

> Processor: P IV or higher > Frequency: 1.4 GHz or higher > Memory: 1GB RAM > Graphics card: OpenGL-capable > Resolution: 1280 x 1024 px

Supported operating systems:

> Windows Vista > Windows XP > Windows 7

ezyLum

Plug-in-catalogue

System requirements

R.STAHL

Am Bahnhof 30

74638 Waldenburg, Germany

T +49 7942 943-0

F +49 7942 943-4333

www.stahl.de

ID 102699

2014-12 / EN-04 - Printed in Germany