Section VII. Technical Specifications

37-F

Project Reference No.: ITB No. 13-10-31 Name of Project: Procurement of Various IT Equipment, Devices & Fixtures

Item No.

Specification Statement of Compliance

Bidders must state here either “Comply” or “Not Comply” against each of the individual parameters of each Specification stating the corresponding performance parameter of the equipment offered. Statements of “Comply” or “Not Comply” must be supported by evidence in a Bidders Bid and cross-referenced to that evidence. Evidence shall be in the form of manufacturer’s un-amended sales literature, unconditional statements of specification and compliance issued by the manufacturer, samples, independent test data etc., as appropriate. A statement that is not supported by evidence or is subsequently found to be contradicted by the evidence presented will render the Bid under evaluation liable for rejection. A statement either in the Bidders statement of compliance or the supporting evidence that is found to be false either during Bid evaluation, post-qualification or the execution of the Contract may be regarded as fraudulent and render the Bidder or supplier liable for prosecution subject to the provisions of ITB Clause 3.1(a)(ii) and/or GCC Clause 2.1(a)(ii).

PROCUREMENT OF VARIOUS IT EQUIPMENT, DEVICES AND FIXTURES

Qty Unit Brand/Model Statement of Compliance

1 Branded Desktop Computers for Multimedia 5 Unit

21.5-inch (viewable) LED-backlit glossy widescreen TFT display with support for millions of colors ; Resolution: 1920 by 1080 pixels

Processor : 3.1GHz quad-core Intel Core i7 (Turbo Boost up to 3.9GHz) with 8MB L3 cache

Memory: 8GB (two 4GB) of 1600MHz DDR3 memory (Configurable to 16GB.)

Hard Drive: 1TB (7200 rpm) hard drive

Video: AMD Radeon HD 6970M graphics processor with

1GB of GDDR5 memory

FaceTime HD camera

Simultaneously supports full native resolution on the

built-in display and up to a 30-inch display (2560 by 1600 pixels) on an external display

Support for extended desktop and video mirroring modes

Audio

Built-in stereo speakers, built-in microphone, and headphone minijack.

Built-in stereo speakers

Two internal 20-watt high-efficiency amplifiers

Headphone/optical digital audio output (minijack)

Audio line in/optical digital audio input (minijack)

Built-in microphone

Support for Apple iPhone headset with microphone

Connections and Expansion

SuperDrive, SDXC card slot, audio in, audio out, USB

2.0, FireWire 800, Thunderbolt, Gigabit Ethernet.

One Thunderbolt port on 21.5-inch iMac

Two Thunderbolt ports on 27-inch iMac

Mini DisplayPort output with support for DVI, VGA, and

dual-link DVI (adapters sold separately)

One FireWire 800 port; 7 watts

Four USB 2.0 ports ; SDXC card slot

Slot-loading 8x SuperDrive with 4x double-layer burning

(DVD±R DL/DVD±RW/CD-RW) ; Audio in/out

10/100/1000BASE-T Gigabit Ethernet (RJ-45 connector)

; IR receiver

Input

Wireless Keyboard and Magic Mouse or Magic Trackpad.

Wireless Keyboard

Full-size keyboard with 78 (U.S.) or 79 (ISO) keys,

including 12 function keys, 4 arrow keys (inverted “T” arrangement)

Magic Mouse

Smooth, seamless Multi-Touch surface with support for simple gestures (scrolling and swiping). Click and double-click anywhere. Ambidextrous construction accommodates left- and right-handed users.

Name of Bidder : ________________________________

Submitted by: ________________________________ (Printed Name and Signature)

Designation: ________________________________

Date: ________________________________

Section VII. Technical Specifications

37-F

Project Reference No.: ITB No. 13-10-31 Name of Project: Procurement of Various IT Equipment, Devices & Fixtures

Item No.

Specification Statement of Compliance

Bidders must state here either “Comply” or “Not Comply” against each of the individual parameters of each Specification stating the corresponding performance parameter of the equipment offered. Statements of “Comply” or “Not Comply” must be supported by evidence in a Bidders Bid and cross-referenced to that evidence. Evidence shall be in the form of manufacturer’s un-amended sales literature, unconditional statements of specification and compliance issued by the manufacturer, samples, independent test data etc., as appropriate. A statement that is not supported by evidence or is subsequently found to be contradicted by the evidence presented will render the Bid under evaluation liable for rejection. A statement either in the Bidders statement of compliance or the supporting evidence that is found to be false either during Bid evaluation, post-qualification or the execution of the Contract may be regarded as fraudulent and render the Bidder or supplier liable for prosecution subject to the provisions of ITB Clause 3.1(a)(ii) and/or GCC Clause 2.1(a)(ii).

PROCUREMENT OF VARIOUS IT EQUIPMENT, DEVICES AND FIXTURES

Qty Unit Brand/Model Statement of Compliance

Magic Trackpad

Solid-state scrolling trackpad for precise cursor control; supports inertial scrolling, pinch and expand, swipe, three-finger swipe, four-finger swipe, tap, double-tap, rotate, screen zoom, scroll, click and drag, click drag and lock, secondary click A and B

Wireless

Wi-Fi and Bluetooth technologies.

Wi-Fi

802.11n Wi-Fi wireless networking;

2 IEEE 802.11a/b/g

compatible

Bluetooth

Bluetooth 2.1 + EDR (Enhanced Data Rate) wireless technology

Included Software

OS X Mountain Lion

Includes Mail, Messages, Contacts, Calendar, Safari, Reminders, Notification Center, Notes, Dictation, iCloud, Time

Machine, FaceTime, Photo Booth, AirPlay, Game Center, the Mac App Store, iTunes, Gatekeeper, Twitter and Facebook integration,

7 and more.

2 Desktop Computers for Computer Laboratory 45 Unit Intel i7 Processor 3.10 Ghz above

Intel motherboard w/built-in vga, LAN(gigabit 100/1000) & audio

4 GB memory DDR3

500GB SATA Hard Drive

1GB VGA Adapter NVIDIA PCI Express

WIRELESS (b/g/n) DLINK PCI lan card

PCI Firewire Adapter Card

Good quality casing w/ usb port and audio slot in front and w/ 600watts power supply w/ 2 exhaust fan,

USB Keyboard – good quality/brand

USB Optical mouse – good quality (branded)

17" LED monitor – good quality (branded) ; UPS 650VA

3 LCD Multimedia Projector w/ tripod screen 3 Unit

Native SVGA (800 x 600)

Maximum UXGA (1,600 x 1,200), 1080p (1,920 x 1,080)

4:3 (native), 16:9 ; 10,000:1 ; 1.07 Billion Colors

2700 ANSI lumens (standard), 2160 ANSI lumens (ECO)

190 W user replaceable P-VIP lamp

5000 hours (Standard); 6000 hours (ECO); 7000 hours (ExtremeEco)

One internal speaker with 2 W output

AC input 100~240V auto-switching power supply

234 Watts (Operation), <0.5 Watts (Standby)

30 dBA (Standard mode), 26 dBA (ECO mode)

Dynamic Black

Auto Keystone Correction ; Wall-Color Compensation

Name of Bidder : ________________________________

Submitted by: ________________________________ (Printed Name and Signature)

Designation: ________________________________

Date: ________________________________

Section VII. Technical Specifications

37-F

Project Reference No.: ITB No. 13-10-31 Name of Project: Procurement of Various IT Equipment, Devices & Fixtures

Item No.

Specification Statement of Compliance

Bidders must state here either “Comply” or “Not Comply” against each of the individual parameters of each Specification stating the corresponding performance parameter of the equipment offered. Statements of “Comply” or “Not Comply” must be supported by evidence in a Bidders Bid and cross-referenced to that evidence. Evidence shall be in the form of manufacturer’s un-amended sales literature, unconditional statements of specification and compliance issued by the manufacturer, samples, independent test data etc., as appropriate. A statement that is not supported by evidence or is subsequently found to be contradicted by the evidence presented will render the Bid under evaluation liable for rejection. A statement either in the Bidders statement of compliance or the supporting evidence that is found to be false either during Bid evaluation, post-qualification or the execution of the Contract may be regarded as fraudulent and render the Bidder or supplier liable for prosecution subject to the provisions of ITB Clause 3.1(a)(ii) and/or GCC Clause 2.1(a)(ii).

PROCUREMENT OF VARIOUS IT EQUIPMENT, DEVICES AND FIXTURES

Qty Unit Brand/Model Statement of Compliance

4 Branded Rackmount Server (branded) 1 Unit

Form factor/height : Rack/1U

Processor (max) : Intel Xeon E3-1200v.2 series (quad-core) up to 3.6 GHz/8 MB/1600 MHz, Intel Core i3 2100 series (dual-core) up to 3.4 GHz/3 MB/1333 MHz, Pentium (dual-core) up to 3.0 GHz/3 MB/1333 MHz

Number of processors (std/max) : 1/1

Cache (max) : 8 MB L3

Memory (max) : 2 × 4 GB 1600 MHz DDR-3 UDIMM standard, maximum 32 GB via four DIMM slots

Expansion slots : One PCIe x8, one PCIe x4 for hardware RAID-0, -1, compact dual-port NIC adapter (via CTO only)

Disk bays (total/hot-swap) : Two 3.5 in. simple-swap SATA or four 2.5 in. hot-swap/simple-swap SAS/SATA (simple-swap 2.5 in. via CTO only)

Maximum internal storage : 6.0 TB, optical drive device DVDRW

Network interface : Dual Gigabit Ethernet

Power supply (std/max) : 300 W (1/1)or redundant 460 W (1/2)

Simple-swap components : Two 3.5 in. simple-swap SATA or four 2.5 in. hot-swap/simple-swap SAS/SATA HDDs (model dependent)

RAID support : Simple-swap SATA models - ServeRAID-C100 for IBM System x; hot-swap SAS model hardware RAID-0, -1 is standard (model dependent); optional hardware RAID-5

Systems management : Integrated Management Module 2 (IMM2) with IPMI 2.0 and Serial over LAN, optional upgrade to remote presence via Feature on Demand (FoD); IBM Systems Director, ServerGuide

Operating systems supported : Microsoft Windows Server 2008 R2/ Microsoft Windows Server 2008, Red Hat Linux, SUSE Linux, v Sphere 5.0

Limited warranty : 3-year customer replaceable unit and onsite limited warranty, next business day 9×5, service upgrades available

5 Branded Rackmount Switch for Rack Server 3 Unit

Head-of-Line (HOL) Blocking : HOL blocking prevention

Type: 24-Port Unmanaged Rack Mount Switch

Priority Levels : 4 hardware queues

Scheduling : Priority queuing and weighted round-robin

Class of Service : 802.1p priority based

Ports : 24 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T ports with 2 combo mini-GBIC slots

Cabling Type : Unshielded twisted pair category 5 or better for 10BASE-T/100BASE-TX; 1000BASE-T recommended

LEDs : System, Link/Activity, 100M,* Gigabit,* mini-GBIC* 1

Standards : 802.310BASE-T Ethernet; 802.3u ;100BASE-TX Fast Ethernet ; 802.3ab 1000BASE-T Gigabit Ethernet ; 802.3z Gigabit Ethernet ; 802.3x flow control; 802.1p priority

Power Supply : 100 - 240 VAC, 50 - 60 Hz, internal, universal

Certifications : UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A

Name of Bidder : ________________________________

Submitted by: ________________________________ (Printed Name and Signature)

Designation: ________________________________

Date: ________________________________

Section VII. Technical Specifications

37-F

Project Reference No.: ITB No. 13-10-31 Name of Project: Procurement of Various IT Equipment, Devices & Fixtures

Item No.

Specification Statement of Compliance

Bidders must state here either “Comply” or “Not Comply” against each of the individual parameters of each Specification stating the corresponding performance parameter of the equipment offered. Statements of “Comply” or “Not Comply” must be supported by evidence in a Bidders Bid and cross-referenced to that evidence. Evidence shall be in the form of manufacturer’s un-amended sales literature, unconditional statements of specification and compliance issued by the manufacturer, samples, independent test data etc., as appropriate. A statement that is not supported by evidence or is subsequently found to be contradicted by the evidence presented will render the Bid under evaluation liable for rejection. A statement either in the Bidders statement of compliance or the supporting evidence that is found to be false either during Bid evaluation, post-qualification or the execution of the Contract may be regarded as fraudulent and render the Bidder or supplier liable for prosecution subject to the provisions of ITB Clause 3.1(a)(ii) and/or GCC Clause 2.1(a)(ii).

PROCUREMENT OF VARIOUS IT EQUIPMENT, DEVICES AND FIXTURES

Qty Unit Brand/Model Statement of Compliance

6 24 ports Gigabit Switch Rackmount 12 Unit

24 ports of Gigabit Ethernet (10/100/1000) connectivity

deliver top-quality performance for high-bandwidth voice, video, and wireless applications

Two combination mini Gigabit Interface Converter ports

help you deploy the switch in your existing high-speed network

Power-saving technology automatically enters sleep mode, turns off unused ports, and adjusts power as needed

Quality-of-Service features help preserve your network

bandwidth while providing clarity and reliability for your critical network applications

Automatic MDI/MDI-X cable detection automatically adjusts for different cable types in use on your network

Automatic speed and full- and half-duplex sensing helps

ensure that connected devices are running at the right network speed

Supports rack-mounting for easy integration into an existing server environment.

7 Balance Router – Dual GigabitRouter 2 Unit

Dual Gigabit Ethernet WAN ports for load balancing and

business continuity Built-in 4-port Gigabit Ethernet switch Strong security: Proven stateful packet inspection (SPI) firewall and hardware encryption High capacity, high-performance, IP Security (IPsec) VPN capabilities Intuitive, browser-based device manager and setup wizards

8 Wireless Router - App Enabled Dual-Band Wireless Router

2 Unit

Description Dual-Band N900 Router with Gigabit and USB

Switch Port Speed: 10/100/1000 Mbps (Gigabit Ethernet)

Radio Frequency: 2.4 and 5 GHz

# of Antennas: 6 (3 per band)

Ports: Power, USB, Internet, Ethernet (1-4)

Buttons: Reset, Wi-Fi Protected Setup

LEDs: Top panel: Power ; Back panel: Internet, Ethernet (1-4)

UPnP: Supported

Security features: WEP, WPA, WPA2

Security key: bits Up to 128-bit encryption

Storage File System Support:

FAT, and NTFS, and HFS+

Dimensions: 8.86” x 0.98” x 6.30” (225 x 25 x 160mm)

Unit Weight: 12.7 oz (360 g)

Power 12V, 2A

Name of Bidder : ________________________________

Submitted by: ________________________________ (Printed Name and Signature)

Designation: ________________________________

Date: ________________________________

Section VII. Technical Specifications

37-F

Project Reference No.: ITB No. 13-10-31 Name of Project: Procurement of Various IT Equipment, Devices & Fixtures

Item No.

Specification Statement of Compliance

Bidders must state here either “Comply” or “Not Comply” against each of the individual parameters of each Specification stating the corresponding performance parameter of the equipment offered. Statements of “Comply” or “Not Comply” must be supported by evidence in a Bidders Bid and cross-referenced to that evidence. Evidence shall be in the form of manufacturer’s un-amended sales literature, unconditional statements of specification and compliance issued by the manufacturer, samples, independent test data etc., as appropriate. A statement that is not supported by evidence or is subsequently found to be contradicted by the evidence presented will render the Bid under evaluation liable for rejection. A statement either in the Bidders statement of compliance or the supporting evidence that is found to be false either during Bid evaluation, post-qualification or the execution of the Contract may be regarded as fraudulent and render the Bidder or supplier liable for prosecution subject to the provisions of ITB Clause 3.1(a)(ii) and/or GCC Clause 2.1(a)(ii).

PROCUREMENT OF VARIOUS IT EQUIPMENT, DEVICES AND FIXTURES

Qty Unit Brand/Model Statement of Compliance

9 KVM SWITCH (Stackable Switch- for 19” Rack Server Cabinet)

2 Unit

For Monitor, Keyboard and Mouse

VGA, SVGA, XVGA Port

USB and PS/2 port for Keyboard and Mouse

Supports up to 4 units PC/Server

With cables for VGA/SVGA, USB and PS/2

Rack server support

10 150Mbps Outdoor Wireless Access Point 5 Unit

Interface : 1 10/100Mbps Auto-Sensing RJ45 Port (Auto MDI/MDIX, PoE) ; 1 External Reverse SMA Connector 1 Grounding Terminal

Button : Reset Button

External Power Supply : 12VDC / 1.0A

Wireless Standards : IEEE 802.11a , IEEE 802.11n

Antenna : 15dBi Dual-Polarized Directional Antenna

Dimensions ( W x D x H ) : 9.8 x 3.3 x 2.4 in. (250 x 85 x 60.5mm)

Antenna Beamwidth : Horizontal: 60° ; Vertical: 14°

Protection : 15KV ESD Protection; 4000V Lightning Protection; Grounding Terminal Integrated

11 54Mbps Wireless Router 5 Unit

Interface : 4 10/100Mbps LAN Ports ; 1 10/100Mbps WAN Port

Button : Reset Button

External Power Supply : 9VDC/0.6A

Wireless Standards: IEEE 802.11g, IEEE 802.11b

Antenna: 5dBi Detachable Omni-Directional (RP-SMA)

Dimensions ( W x D x H ) : 6.3 x 4.2 x 1.2 in. (160 x 102 x 28mm)

12 24-Port 10/100Mbps Switch 5 Unit

Standards and Protocols: IEEE802.3, 802.3u, 802.3x, CSMA/CD, TCP/IP

Interface : 24 10/100Mbps Auto-Negotiation RJ45 ports (Auto MDI/MDIX)

Network Media : 10Base-T: UTP category 3, 4, 5 cable (maximum 100m) ; EIA/TIA-568 100Ù STP (maximum 100m) 100Base-Tx: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ù STP (maximum 100m)

Backup Bandwidth : 4.8Gbps

External Power Supply : 100-240VAC, 50/60Hz

Fan Quantity : Fanless

LED Indicator : Power, Link/Act, 100Mbps

Dimensions ( W x D x H ) : 11.6×7.1×1.7 in. (294×180×44 mm)

13 Closed Type Network Cabinet-Rack- WALLMOUNT 7 Unit

- 2 Ft ; supports up to 4 switch hub; rack type

- color – black ; Ventilation slots front and side ; 2 – 4 fans

- Optional fans can be added into top cutouts

- Includes two (2) pairs of adjustable EIA

- Wall mount section has cable access panels top and

bottom

Name of Bidder : ________________________________

Submitted by: ________________________________ (Printed Name and Signature)

Designation: ________________________________

Date: ________________________________

Section VII. Technical Specifications

37-F

Project Reference No.: ITB No. 13-10-31 Name of Project: Procurement of Various IT Equipment, Devices & Fixtures

Item No.

Specification Statement of Compliance

Bidders must state here either “Comply” or “Not Comply” against each of the individual parameters of each Specification stating the corresponding performance parameter of the equipment offered. Statements of “Comply” or “Not Comply” must be supported by evidence in a Bidders Bid and cross-referenced to that evidence. Evidence shall be in the form of manufacturer’s un-amended sales literature, unconditional statements of specification and compliance issued by the manufacturer, samples, independent test data etc., as appropriate. A statement that is not supported by evidence or is subsequently found to be contradicted by the evidence presented will render the Bid under evaluation liable for rejection. A statement either in the Bidders statement of compliance or the supporting evidence that is found to be false either during Bid evaluation, post-qualification or the execution of the Contract may be regarded as fraudulent and render the Bidder or supplier liable for prosecution subject to the provisions of ITB Clause 3.1(a)(ii) and/or GCC Clause 2.1(a)(ii).

PROCUREMENT OF VARIOUS IT EQUIPMENT, DEVICES AND FIXTURES

Qty Unit Brand/Model Statement of Compliance

- Plexi-Glass front door provides full view of equipment with

full 180° opening, can be easily removed and hinged in either direction, and complete with lock and key

- Pair of solid side panels are removable

14 Rack Server Shelves or Tray (for Rackmount) 2 Unit

- 2u 19" Rackmount Shelf adjusts 22 1/8" to 39"d. Supports

350 lbs. Black. Has side lip to prevent sliding off rack. For 19" racks

- With screw(s) ; Rack holder

15 Cable Duct / Network Duct 30 Pcs

- 2 ½ x 2 1/2 , 5 ½ ft

16 Optical Mouse 40 Unit

- USB/PS2 (good brand)

17 USB/PS2 keyboard (good brand) 40 Unit

18 Hard Drive SATA 1 Terabyte 2 Unit

19 RJ 45 Connector for Cat5 440 Pcs

20 Plug Boots for RJ 45 400 Pcs

21 UTP Cable Cat5e (300m/roll) 5 Roll

22 Cat6 UTP Cable (300m/roll) - outdoor 2 Roll

23 SVGA Cable 15 meters (for LCD Projector) 6 Pcs

24 Rackmount Switch – Manageable (branded) 1 Unit

Ports : • 24 RJ-45 connectors for 10BASE-T/100BASE-TX/ 1000 BASE-T with 4 shared Gigabit SFP slots • Console port • Auto medium dependent interface (MDI) and MDI crossover (MDI-X) • Auto negotiate/manual setting • RPS port for connecting to redundant power supply unit

Buttons: Reset button

Cabling type • Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX • UTP Category 5 Ethernet or better for 1000BASE-T

LEOs : PWR, Fan,Link/Act, Speed, RPS, Master, Stack ID 1 through 8

Switching capacity : Up to 48 Gbps, nonbloc king

Forwarding rate (based on 64-byte packets): Up to 35.7 mpps

Stack operation • Up to 8 unHs In a stack (192 ports) • Hot Insertion and removal • Ring and chain stacKing options • Master and backup master for resilient stack control • Auto-numbering or manualconfiguration of units in stack

Layer 2

MAC table size: 8000

Number of VLANs : 256 active VlANs (4096 range)

Name of Bidder : ________________________________

Submitted by: ________________________________ (Printed Name and Signature)

Designation: ________________________________

Date: ________________________________

Section VII. Technical Specifications

37-F

Project Reference No.: ITB No. 13-10-31 Name of Project: Procurement of Various IT Equipment, Devices & Fixtures

Item No.

Specification Statement of Compliance

Bidders must state here either “Comply” or “Not Comply” against each of the individual parameters of each Specification stating the corresponding performance parameter of the equipment offered. Statements of “Comply” or “Not Comply” must be supported by evidence in a Bidders Bid and cross-referenced to that evidence. Evidence shall be in the form of manufacturer’s un-amended sales literature, unconditional statements of specification and compliance issued by the manufacturer, samples, independent test data etc., as appropriate. A statement that is not supported by evidence or is subsequently found to be contradicted by the evidence presented will render the Bid under evaluation liable for rejection. A statement either in the Bidders statement of compliance or the supporting evidence that is found to be false either during Bid evaluation, post-qualification or the execution of the Contract may be regarded as fraudulent and render the Bidder or supplier liable for prosecution subject to the provisions of ITB Clause 3.1(a)(ii) and/or GCC Clause 2.1(a)(ii).

PROCUREMENT OF VARIOUS IT EQUIPMENT, DEVICES AND FIXTURES

Qty Unit Brand/Model Statement of Compliance

VLAN : • Port-based and 802.10 tag-based VlANs • Protocol-based VLAN ; Management VLAN • Private VLAN Edge (PVE) ; GVRP

Head-of-line (HOL) blocking : HOL blocking prevention

Layer 3 options : • Static routing ; Classless lnterdomain routing (CIDR) • 128 static routes ; IPV4 • Forwarding in silicon-Wire-speed forwarding of Layer 3 traffic

Pv6: 1Pv6 Host Mode; 1Pv6 over Ethernet

Dual 1Pv6/1Pv4 stack;1Pv6 Neighbor and Router Discovel)l (ND)

1Pv6 Stateless Address Autoconfiguration;Path MTU Dsi covery

Duplicate Address Detection (DAD) ; ICMPv6 1Pv6 over 1Pv4 network WithISATAP tunnel support

IPv6 QoS : Prioritize1Pv6 packetsin hardware

1Pv6 ACL: Drop or Rate Limit 1Pv6 packetsIn hardware

MLD Snooping: Deliver 1Pv6 multicast packets only to the

required receivers

1Pv6 Applications: Web/SSL,Telnet Server/SSH.Ping.

Traceroute,SNTP, TFTP.Radius,Syslog,DNS Client

1Pv6 RFCs Supported :

RFC2463- ICMPv6 RFC3513 -1Pv6 Address architecture RFC 4291-IP Version 6 Addressing Architecture RFC 2460 -Internet Protocolv6 (1Pv6) Specification RFC 2461-Neighbor Discovery for 1Pv6 RFC 2462 -1Pv6 Stateless Address Auto-configuration RFC 1981 -Path MTU Discovery RFC 4007 -1Pv6 Seeped Address Architecture RFC3484 - Default address selection mechanismIs described by RFC3484 RFC4214 - ISATAP tunneling RFC4293 -MIB 1Pv6:TextualConventions and GeneralGroup

RFC 3595 - Textual Conventions for 1Pv6 Aow Label

Web user interface : Built- n web user interface for easy

browser-based configuration (HTIP/HTTPS)

SNMP : SNMP versions 1. 2c, and 3 With support for traps

SNMPMIBs : RFC1213 MIB-2,RFC2863 interface

MIB,RFC2665 Ether-like MIB, RFC1493 bridge MIB, RFC2674 extended bridge MIB (P-bridge,0-bridge).RFC2819 RMON MBI (groups 1. 2, 3,and 9 only), RFC2737 entity MBI

,RFC3621Power Ethernet MBI ,RFC 2618 RADIUS client MIB, RFC 1215 traps

RMON : Embedded RMON software agent supports 4 RMON

groups (histol)l,statsi tics,alarms, and events) for enhanced traffic management, monitoring,and analysis

Firmware upgrade:•Web browser upgrade (HTIP) and

Trivial File Transfer Protocol (TFTP) • Dual images for resilient firmware upgrades

Port mirroring : Traffic on a port can be mirrored to another

port for analysis with a network analyLer or RMON probe

Name of Bidder : ________________________________

Submitted by: ________________________________ (Printed Name and Signature)

Designation: ________________________________

Date: ________________________________

Section VII. Technical Specifications

37-F

Project Reference No.: ITB No. 13-10-31 Name of Project: Procurement of Various IT Equipment, Devices & Fixtures

Item No.

Specification Statement of Compliance

Bidders must state here either “Comply” or “Not Comply” against each of the individual parameters of each Specification stating the corresponding performance parameter of the equipment offered. Statements of “Comply” or “Not Comply” must be supported by evidence in a Bidders Bid and cross-referenced to that evidence. Evidence shall be in the form of manufacturer’s un-amended sales literature, unconditional statements of specification and compliance issued by the manufacturer, samples, independent test data etc., as appropriate. A statement that is not supported by evidence or is subsequently found to be contradicted by the evidence presented will render the Bid under evaluation liable for rejection. A statement either in the Bidders statement of compliance or the supporting evidence that is found to be false either during Bid evaluation, post-qualification or the execution of the Contract may be regarded as fraudulent and render the Bidder or supplier liable for prosecution subject to the provisions of ITB Clause 3.1(a)(ii) and/or GCC Clause 2.1(a)(ii).

PROCUREMENT OF VARIOUS IT EQUIPMENT, DEVICES AND FIXTURES

Qty Unit Brand/Model Statement of Compliance

25 Cable Manager (Server Rack – 2U2H) 1 Unit

Neat Patch Cable Management Unit (2U)

19" W x 3.5" H x 8.875" D ; Extends from front rail 3-1/8" (See attached Drawing)

26 Desktop Computer 2 Unit

Microprocessor : Intel Core i5 Intel Core i5 3550P (3.1GHz

up to 3.3GHz) or higher

Motherboard: Core i5 compatible board

Chipset : Intel Chipset

Memory : 4GB of DDR3 1066/1333 MHz SDRAM (dual-

channel support on four DIMMs)

Audio: Embedded high-definition audio 5.1-channel S/PDIF

Hard Drive : 500 GB SATA 7200rpm

Optical Drive : 16X DVD-RW Super Multi Drive

Video Card: 1 GB dedicated video PCI-E

Monitor : minimum of 19 inch wide format LED

Networking : Integrated gigabit ethernet network interface

(Broadband Ready)

I/O Ports : USB 2.0, 2 PS/2, Line-in, Line-out, Mic-in, RJ-45

Slot : minimum of 2 slots for PCI

Accessories: Keyboard, Optical Mouse, External speaker,

650 VA UPS, Preinstalled operating system for immediate testing of the unit

Warranty: 1 Yr. on all parts including keyboard and mouse

27 Inkjet Printer 2 Unit Print Method : On-demand ink jet

Print Direction : Bi-directional printing, Uni-directional printing

Maximum Resolution : 5760 x 1440 dpi (with Variable-Sized Droplet Technology)

Minimum Ink Droplet Volume : 3pl

Print Speed: Black Draft Text - Memo (A4) 27ppm/15 ppm (Bk/Cl)

Copy Speed: Max. Black Draft Text - Memo (A4) Approx.5 sec (Draft); Max. Colour Draft Text-Memo (A4)Approx.10sec (Draft)

Copy Mode: Standard copy mode

Maximum Copies From Standalone :20 sheets (fixed)

Scanner Type : Flatbed colour image scanner

Sensor Type : CIS

Optical Resolution : 600 x 1200 dpi

Maximum Scan Area : 216 x 297mm (8.5 x 11.7")

Scanner Bit Depth: Colour:48-bit internal, 24-bit external ; Grayscale:16-bit internal, 8-bit external; Black & White: 16-bit internal, 1-bit external

Scan Speed : Monochrome 300 dpi:2.4 msec/line Colour 300 dpi:9.5 msec/line ; Monochrome 600 dpi:7.2 msec/line ; Colour 600 dpi: 14.3 msec/line

Paper Feed Method : Friction feed

Number of Paper Trays : 1

Input Capacity: 50 sheets, A4 Plain paper (75g/m2); 10 sheets, Premium Glossy Photo Paper

Name of Bidder : ________________________________

Submitted by: ________________________________ (Printed Name and Signature)

Designation: ________________________________

Date: ________________________________

Section VII. Technical Specifications

37-F

Project Reference No.: ITB No. 13-10-31 Name of Project: Procurement of Various IT Equipment, Devices & Fixtures

Item No.

Specification Statement of Compliance

Bidders must state here either “Comply” or “Not Comply” against each of the individual parameters of each Specification stating the corresponding performance parameter of the equipment offered. Statements of “Comply” or “Not Comply” must be supported by evidence in a Bidders Bid and cross-referenced to that evidence. Evidence shall be in the form of manufacturer’s un-amended sales literature, unconditional statements of specification and compliance issued by the manufacturer, samples, independent test data etc., as appropriate. A statement that is not supported by evidence or is subsequently found to be contradicted by the evidence presented will render the Bid under evaluation liable for rejection. A statement either in the Bidders statement of compliance or the supporting evidence that is found to be false either during Bid evaluation, post-qualification or the execution of the Contract may be regarded as fraudulent and render the Bidder or supplier liable for prosecution subject to the provisions of ITB Clause 3.1(a)(ii) and/or GCC Clause 2.1(a)(ii).

PROCUREMENT OF VARIOUS IT EQUIPMENT, DEVICES AND FIXTURES

Qty Unit Brand/Model Statement of Compliance

Output Capacity:30 sheets, A4 Plain paper; 20 sheets,

Premium Glossy Photo Paper (10x15cm/4x6", 13x18cm/5x7",

9x13cm/3.5x5")

Maximum Paper Size : 8.5 x 44"

Connectivity : Standard:USB 2.0 Hi-Speed

Ink Tank : Original Manufacturer Supplied

28 Multimedia Projector 6 Unit

Projection System : 3 LCD

Native Resolution : SVGA (800 x 600)

Aspect Ratio : 4:3 Native, 16:9 Selectable

Contrast Ratio : 3000:1

Offset : 8:1

Focus Method : Manual Focus

Color Light Output : 2800 ANSI Lumens

White Light Output : 2800 ANSI Lumens

Projection Screen Size : 30" to 350"

Projection Distance : 60" screen 1.77 - 2.4 m

Lamp Type : 200 W UHE (E-TORL)

Lamp Life : 4000 hours (standard) 5000 hours (eco)

Input: Video : 1 x RCA (Yellow), 1 x S - Video, 1 x Component D - sub 15 pin

Input: Computer : 1 x d-sub 15 pin (RGB), 1 x USB 2.0 Type B

Input : USB Memory Device: 1 x USB 2.0 Type A

Input : Three in one USB Display : 1 x USB 2.0 Type B

Speaker Output : 2W

Power Supply : 100-240 VAC, 50/60 Hz

Standard Accessories : Computer cable, remote control, power cord, manual

Warranty : minimum 1 year

29 Wireless Microphone 2 Unit

Kit Includes: 1 unit handheld transmitter ; 1 Single-channel Diversity Receiver with optional logic output up to 42 compatible systems (multi-band)

Accessories: microphone clip, rackmount kit, two 1/4 wave antennas, power supply, 2 AA batteries, protective bumpers with 8 screws, vinyl bag, and user guide

Type : Wireless Microphone

Polar Pattern: Unidirectional

Rated Impedance : 150 ohms or lower

Frequency response : between, 50 - 15000 Hz

Warranty : minimum 1 year

30 Computer Table 3 Unit

Type : 3-layer computer table

Material: Laminated wood/ iron frame

- End -

Name of Bidder : ________________________________

Submitted by: ________________________________ (Printed Name and Signature)

Designation: ________________________________

Date: ________________________________

Section VII. Technical Specifications

37-F