0162-0134

AUTHOR INFORMATION PACK 4 Feb 2015 www.elsevier.com/locate/jinorgbio 1

JOURNAL OF INORGANIC BIOCHEMISTRYAn Interdisciplinary Journal

AUTHOR INFORMATION PACK

TABLE OF CONTENTS.

XXX.

Description Audience Impact Factor Abstracting and Indexing Editorial Board Guide for Authors

p.1p.1p.1p.2p.2p.4

ISSN: 0162-0134

DESCRIPTION.

The Journal of Inorganic Biochemistry is an established international forum for research in all aspectsof Biological Inorganic Chemistry. Original papers of a high scientific level are published in the formof Articles (full length papers), Short Communications, Focused Reviews and Bioinorganic Methods.Topics include: the chemistry, structure and function of metalloenzymes; the interaction of inorganicions and molecules with proteins and nucleic acids; the synthesis and properties of coordinationcomplexes of biological interest including both structural and functional model systems; the functionof metal- containing systems in the regulation of gene expression; the role of metals in medicine;the application of spectroscopic methods to determine the structure of metallobiomolecules; thepreparation and characterization of metal-based biomaterials; and related systems. The emphasisof the Journal is on the structure and mechanism of action of metallobiomolecules.

Supplementary Data Archive

Benefits to authorsWe also provide many author benefits, such as free PDFs, a liberal copyright policy, special discountson Elsevier publications and much more. Please click here for more information on our author services.

Please see our Guide for Authors for information on article submission. If you require any furtherinformation or help, please visit our support pages: http://support.elsevier.com

AUDIENCE.

Inorganic Biochemists, Biochemists and Chemists.

IMPACT FACTOR.

2013: 3.274 Thomson Reuters Journal Citation Reports 2014


ABSTRACTING AND INDEXING.

BIOSISElsevier BIOBASEChemical AbstractsCurrent Contents/Life SciencesMEDLINEInternational Abstracts of Biological SciencesEMBASEPASCAL/CNRSScopusEMBiology

EDITORIAL BOARD.

Editor-in-ChiefJ.H. Dawson, Dept. of Chemistry and Biochemistry, University of South Carolina, 631 Sumter Street, Columbia,SC 29208, USA

Editorial AssociateM. Sono

Associate EditorsS.J. Berners-Price, Gold Coast Campus, Institute for Glycomics, Griffith University, Southport, QLD 4222,Queensland, AustraliaY. Watanabe, Dept. of Chemistry, Fac. of Science, Nagoya University, Chikusa-ku, 464-8602, Nagoya, JapanP.J. Sadler, Dept. of Chemistry, University of Warwick, Gibbet Hill Road, Coventry, CV4 7AL, UK

Editorial BoardE. Alessio, Trieste, ItalyF.A. Armstrong, Oxford, UKK. Barnham, Victoria, AustraliaV. Brabec, Brno, Czech RepublicK.L. Bren, Rochester, New York, USAJ.B. Broderick, Bozeman, Montana, USAA. Butler, Santa Barbara, California, USAM. Capdevila, Cerdanyola del Valls, Barcelona, SpainA. Casini, Groningen, NetherlandsS.I. Chan, Taipei City, Taiwan, ROCC-M. Che, Hong Kong, ChinaD. C. Crans, Fort Collins, Colorado, USAD. Dixon, Atlanta, Georgia, USAA.M. English, Montreal, Quebec, CanadaA. Erxleben, Galway, IrelandN. Farrell, Richmond, Virginia, USAA. Ghosh, Troms, NorwayH.B. Gray, Pasadena, California, USAJ.T. Groves, Princeton, New Jersey, USAZ. Guo, Nanjing, ChinaG.R. Hanson, Brisbane, Queensland, AustraliaT. Hayashi, Suita-Shi, JapanR.H. Holm, Cambridge, Massachusetts, USAM. Ikeda-Saito, Sendai-Shi, JapanK. Ishimori, Sapporo, JapanS. Itoh, Osaka, JapanA. Ivancich, Gif-sur-Yvette, FranceL. Ji, Guangzhou, ChinaL. Jiang, Beijing, ChinaK.D. Karlin, Baltimore, Maryland, USAS.J. Lippard, Cambridge, Massachusetts, USAZ-W. Mao, Guangzhou, ChinaF. Meyer, Gttingen, GermanyJ.R. Morrow, Buffalo, New York, USAW. Nam, Seoul, South Korea


R. Narehood Austin, Lewiston, Maine, USAA. Neves, Santa Catarina, BrazilJ. Nicls Gutirrez, Granada, SpainC. Orvig, Vancouver, British Columbia, CanadaJ. Pessoa, Lisboa, PortugalE.L. Raven, Leicester, UKJ. Reedijk, Leiden, NetherlandsA.C. Rosenzweig, Evanston, Illinois, USAT. Salifoglou, Thessaloniki, GreeceJ.S. Selverstone Valentine, Los Angeles, California, USAE.I. Solomon, Stanford, California, USAM.J. Stillman, London, CanadaH. Sun, Hong Kong, ChinaI. Svg, Debrecen, HungaryW. Weigand, Jena, GermanyR.J.P. Williams, Oxford, UK


GUIDE FOR AUTHORS.

Your Paper Your WayWe now differentiate between the requirements for new and revised submissions. You may choose tosubmit your manuscript as a single Word or PDF file to be used in the refereeing process. Only whenyour paper is at the revision stage, will you be requested to put your paper in to a 'correct format'for acceptance and provide the items required for the publication of your article.To find out more, please visit the Preparation section below.

INTRODUCTIONThe Journal of Inorganic Biochemistry is an established international forum for research in all aspectsof Biological Inorganic Chemistry.

Types of ContributionsOriginal papers of high scientific level are published in the form of Articles (full length papers),Short Commumications, and Focused Reviews. Topics include; the chemistry, structure, and functionof metalloenzymes; the interaction of inorganic ions and molecules with proteins and nucleicacids; the preparation and properties of coordination complexes of biological interest including bothstructural and functional model systems; the role of metal-containing systems in the regulationof gene expression; the application of spectroscopic methods to determine the structure ofmetallobiomolecules; the function of trace elements in living systems; and related subjects.

BEFORE YOU BEGINEthics in publishingFor information on Ethics in publishing and Ethical guidelines for journal publication seehttp://www.elsevier.com/publishingethics and http://www.elsevier.com/journal-authors/ethics.

Conflict of interestAll authors are requested to disclose any actual or potential conflict of interest including any financial,personal or other relationships with other people or organizations within three years of beginning thesubmitted work that could inappropriately influence, or be perceived to influence, their work. Seealso http://www.elsevier.com/conflictsofinterest. Further information and an example of a Conflict ofInterest form can be found at: http://help.elsevier.com/app/answers/detail/a_id/286/p/7923.

Submission declaration and verificationSubmission of an article implies that the work described has not been published previously (exceptin the form of an abstract or as part of a published lecture or academic thesis or as an electronicpreprint, see http://www.elsevier.com/postingpolicy), that it is not under consideration for publicationelsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsibleauthorities where the work was carried out, and that, if accepted, it will not be published elsewherein the same form, in English or in any other language, including electronically without the writtenconsent of the copyright-holder. To verify originality, your article may be checked by the originalitydetection service CrossCheck http://www.elsevier.com/editors/plagdetect.

ContributorsEach author is required to declare his or her individual contribution to the article: all authors must havematerially participated in the research and/or article preparation, so roles for all authors should bedescribed. The statement that all authors have approved the final article should be true and includedin the disclosure.

AuthorshipAll authors should have made substantial contributions to all of the following: (1) the conception anddesign of the study, or acquisition of data, or analysis and interpretation of data, (2) drafting thearticle or revising it critically for important intellectual content, (3) final approval of the version tobe submitted.

Changes to authorshipThis policy concerns the addition, deletion, or rearrangement of author names in the authorship ofaccepted manuscripts:Before the accepted manuscript is published in an online issue: Requests to add or remove an author,or to rearrange the author names, must be sent to the Journal Manager from the corresponding authorof the accepted manuscript and must include: (a) the reason the name should be added or removed,


or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from all authors thatthey agree with the addition, removal or rearrangement. In the case of addition or removal of authors,this includes confirmation from the author being added or removed. Requests that are not sent bythe corresponding author will be forwarded by the Journal Manager to the corresponding author, whomust follow the procedure as described above. Note that: (1) Journal Managers will inform the JournalEditors of any such requests and (2) publication of the accepted manuscript in an online issue issuspended until authorship has been agreed.After the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrangeauthor names in an article published in an online issue will follow the same policies as noted aboveand result in a corrigendum.

Article transfer serviceThis journal is part of our Article Transfer Service. This means that if the Editor feels your article is moresuitable in one of our other participating journals, then you may be asked to consider transferring thearticle to one of those. If you agree, your article will be transferred automatically on your behalf withno need to reformat. Please note that your article will be reviewed again by the new journal. Moreinformation about this can be found here: http://www.elsevier.com/authors/article-transfer-service.

CopyrightUpon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (formore information on this and copyright, see http://www.elsevier.com/copyright). An e-mail will besent to the corresponding author confirming receipt of the manuscript together with a 'JournalPublishing Agreement' form or a link to the online version of this agreement.

Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internalcirculation within their institutions. Permission of the Publisher is required for resale or distributionoutside the institution and for all other derivative works, including compilations and translations(please consult http://www.elsevier.com/permissions). If excerpts from other copyrighted works areincluded, the author(s) must obtain written permission from the copyright owners and credit thesource(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consulthttp://www.elsevier.com/permissions.

For open access articles: Upon acceptance of an article, authors will be asked to complete an 'ExclusiveLicense Agreement' (for more information see http://www.elsevier.com/OAauthoragreement).Permitted third party reuse of open access articles is determined by the author's choice of user license(see http://www.elsevier.com/openaccesslicenses).

Author rightsAs an author you (or your employer or institution) have certain rights to reuse yourwork. For more information on author rights for (a) subscription articles please seehttp://www.elsevier.com/journal-authors/author-rights-and-responsibilities; (b) for open accessarticles please see http://www.elsevier.com/OAauthoragreement.

Role of the funding sourceYou are requested to identify who provided financial support for the conduct of the research and/orpreparation of the article and to briefly describe the role of the sponsor(s), if any, in study design; inthe collection, analysis and interpretation of data; in the writing of the report; and in the decision tosubmit the article for publication. If the funding source(s) had no such involvement then this shouldbe stated.

Funding body agreements and policiesElsevier has established a number of agreements with funding bodies which allow authorsto comply with their funder's open access policies. Some authors may also be reimbursedfor associated publication fees. To learn more about existing agreements please visithttp://www.elsevier.com/fundingbodies.

Open accessThis journal offers authors a choice in publishing their research:

Open access Articles are freely available to both subscribers and the wider public with permitted reuse


An open access publication fee is payable by authors or on their behalf e.g. by their research funderor institutionSubscription Articles are made available to subscribers as well as developing countries and patient groups throughour universal access programs (http://www.elsevier.com/access). No open access publication fee payable by authors.

Your publication choice will have no effect on the peer review process or acceptance of submittedarticles.

For open access articles, permitted third party (re)use is defined by the following Creative Commonsuser licenses:Creative Commons Attribution (CC BY)Lets others distribute and copy the article, create extracts, abstracts, and other revised versions,adaptations or derivative works of or from an article (such as a translation), include in a collectivework (such as an anthology), text or data mine the article, even for commercial purposes, as longas they credit the author(s), do not represent the author as endorsing their adaptation of the article,and do not modify the article in such a way as to damage the author's honor or reputation.Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND)For non-commercial purposes, lets others distribute and copy the article, and to include in a collectivework (such as an anthology), as long as they credit the author(s) and provided they do not alter ormodify the article.The open access publication fee for this journal is $3300, excluding taxes. Learn more about Elsevier'spricing policy: http://www.elsevier.com/openaccesspricing.

Language (usage and editing services)Please write your text in good English (American or British usage is accepted, but not amixture of these). Authors who feel their English language manuscript may require editingto eliminate possible grammatical or spelling errors and to conform to correct scientificEnglish may wish to use the English Language Editing service available from Elsevier'sWebShop (http://webshop.elsevier.com/languageediting/) or visit our customer support site(http://support.elsevier.com) for more information.

SubmissionOur online submission system guides you stepwise through the process of entering your articledetails and uploading your files. The system converts your article files to a single PDF file used inthe peer-review process. Editable files (e.g., Word, LaTeX) are required to typeset your article forfinal publication. All correspondence, including notification of the Editor's decision and requests forrevision, is sent by e-mail.

RefereesPlease submit the names and institutional e-mail addresses of several potential referees. For moredetails, visit our Support site. Note that the editor retains the sole right to decide whether or not thesuggested reviewers are used.

PREPARATIONManuscripts should be typed in double spacing on one side of consecutively numbered pages of A4(21 cm x 30 cm) with a wide margin on the left.

Some flexibility of presentation will be allowed but authors are urged to arrange the subject matterclearly under such headings as Abstract, Introduction, Experimental (or Materials and Methods),Results, Discussion, Acknowledgements (if desired), References, Tables, Figure legends and Figures.The Results and Discussion sections may be combined when appropriate.

For a rough estimate of the final length of their printed article, authors should count 850 words perfull two-column page or 4 illustrations per page.

Short communications


In short communications, the Introduction, Experimental, Results and Discussion sections should becombined into a single untitled section of less than 1200 words with any experimental detail thatcannot be briefly described placed in the footnotes. An abstract of 100-200 words should be included.

Focused ReviewsThese are concise summaries of research progress covering either tightly defined research topicspertaining to the results from several labs written by an expert in the subject matter, or specificaspects of the research from a single lab written by the senior researcher from that lab. An Abstractof 100-200 words should be included.

NEW SUBMISSIONSSubmission to this journal proceeds totally online and you will be guided stepwise through the creationand uploading of your files. The system automatically converts your files to a single PDF file, whichis used in the peer-review process.As part of the Your Paper Your Way service, you may choose to submit your manuscript as a single fileto be used in the refereeing process. This can be a PDF file or a Word document, in any format or lay-out that can be used by referees to evaluate your manuscript. It should contain high enough qualityfigures for refereeing. If you prefer to do so, you may still provide all or some of the source files atthe initial submission. Please note that individual figure files larger than 10 MB must be uploadedseparately.

ReferencesThere are no strict requirements on reference formatting at submission. References can be in any styleor format as long as the style is consistent. Where applicable, author(s) name(s), journal title/booktitle, chapter title/article title, year of publication, volume number/book chapter and the paginationmust be present. Use of DOI is highly encouraged. The reference style used by the journal will beapplied to the accepted article by Elsevier at the proof stage. Note that missing data will be highlightedat proof stage for the author to correct.

Formatting requirementsThere are no strict formatting requirements but all manuscripts must contain the essential elementsneeded to convey your manuscript, for example Abstract, Keywords, Introduction, Materials andMethods, Results, Conclusions, Artwork and Tables with Captions.If your article includes any Videos and/or other Supplementary material, this should be included inyour initial submission for peer review purposes.Divide the article into clearly defined sections.Figures and tables embedded in textPlease ensure the figures and the tables included in the single file are placed next to the relevant textin the manuscript, rather than at the bottom or the top of the file.

REVISED SUBMISSIONSUse of word processing softwareRegardless of the file format of the original submission, at revision you must provide us with aneditable file of the entire article. Keep the layout of the text as simple as possible. Most formattingcodes will be removed and replaced on processing the article. The electronic text should be prepared ina way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier:http://www.elsevier.com/guidepublication). See also the section on Electronic artwork.To avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check'functions of your word processor.

Article structureSubdivision - numbered sectionsDivide your article into clearly defined and numbered sections. Subsections should be numbered1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use thisnumbering also for internal cross-referencing: do not just refer to 'the text'. Any subsection may begiven a brief heading. Each heading should appear on its own separate line.IntroductionState the objectives of the work and provide an adequate background, avoiding a detailed literaturesurvey or a summary of the results.


Material and methodsProvide sufficient detail to allow the work to be reproduced. Methods already published should beindicated by a reference: only relevant modifications should be described.

ExperimentalAuthors should include an experimental section in their papers, which includes a description of allexperiments in sufficient detail to permit reproduction of the work performed, analytical data, andother numerical results not given in the text. Dangerous procedures and potential health hazardsshould be clearly indicated. If the source and quality of reagents will be helpful, please include thisinformation.Theory/calculationA Theory section should extend, not repeat, the background to the article already dealt with in theIntroduction and lay the foundation for further work. In contrast, a Calculation section represents apractical development from a theoretical basis.ResultsResults should be clear and concise.DiscussionThis should explore the significance of the results of the work, not repeat them. A combined Resultsand Discussion section is often appropriate. Avoid extensive citations and discussion of publishedliterature.ConclusionsThe main conclusions of the study may be presented in a short Conclusions section, which may standalone or form a subsection of a Discussion or Results and Discussion section.AppendicesIf there is more than one appendix, they should be identified as A, B, etc. Formulae and equations inappendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix,Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.

Essential title page information Title. Concise and informative. Titles are often used in information-retrieval systems. Avoidabbreviations and formulae where possible. Author names and affiliations. Where the family name may be ambiguous (e.g., a double name),please indicate this clearly. Present the authors' affiliation addresses (where the actual work wasdone) below the names. Indicate all affiliations with a lower-case superscript letter immediately afterthe author's name and in front of the appropriate address. Provide the full postal address of eachaffiliation, including the country name and, if available, the e-mail address of each author. Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeingand publication, also post-publication. Ensure that phone numbers (with country and areacode) are provided in addition to the e-mail address and the complete postal address.Contact details must be kept up to date by the corresponding author. Present/permanent address. If an author has moved since the work described in the article wasdone, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated asa footnote to that author's name. The address at which the author actually did the work must beretained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.

AbstractA concise and factual abstract is required. The abstract should state briefly the purpose of theresearch, the principal results and major conclusions. An abstract is often presented separately fromthe article, so it must be able to stand alone. For this reason, References should be avoided, but ifessential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations shouldbe avoided, but if essential they must be defined at their first mention in the abstract itself.Graphical AbstractGraphical Abstract (figure). The table of contents of this journal contains Graphical Abstracts.Please provide a figure (drawing, structure or reaction scheme) If reduction is needed, please makesure that the illustration is still informative upon reduction.Graphical Abstract (synopsis). Please provide a synopsis of 50 words maximum that illustratesyour work submitted.


HighlightsHighlights are mandatory for this journal. They consist of a short collection of bullet points thatconvey the core findings of the article and should be submitted in a separate editable file in theonline submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet points(maximum 85 characters, including spaces, per bullet point). See http://www.elsevier.com/highlightsfor examples.

KeywordsImmediately after the abstract, provide a maximum of 6 keywords, using American spelling andavoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparingwith abbreviations: only abbreviations firmly established in the field may be eligible. These keywordswill be used for indexing purposes.

AbbreviationsProper use of abbreviations and nomenclature is an important part of an author's presentation. Onthese topics, authors are requested to consult the Information for Contributors to Biochimica etBiophysica Acta, copies of which are available free of charge from the BBA Editorial Secretariat, POBox 1345, Amsterdam, Netherlands.

AcknowledgementsCollate acknowledgements in a separate section at the end of the article before the references and donot, therefore, include them on the title page, as a footnote to the title or otherwise. List here thoseindividuals who provided help during the research (e.g., providing language help, writing assistanceor proof reading the article, etc.).

Nomenclature and unitsFollow internationally accepted rules and conventions: use the international system of units (SI).If other quantities are mentioned, give their equivalent in SI. You are urged to consult IUPAC:Nomenclature of Organic Chemistry: http://www.iupac.org/ for further information.

Database linkingElsevier encourages authors to connect articles with external databases, giving their readers one-click access to relevant databases that help to build a better understanding of the described research.Please refer to relevant database identifiers using the following format in your article: Database: xxxx(e.g., TAIR: AT1G01020; CCDC: 734053; PDB: 1XFN). See http://www.elsevier.com/databaselinkingfor more information and a full list of supported databases.

Math formulaePlease submit math equations as editable text and not as images. Present simple formulae inline with normal text where possible and use the solidus (/) instead of a horizontal line for smallfractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are oftenmore conveniently denoted by exp. Number consecutively any equations that have to be displayedseparately from the text (if referred to explicitly in the text).

FootnotesFootnotes should be used sparingly. Number them consecutively throughout the article. Many wordprocessors build footnotes into the text, and this feature may be used. Should this not be the case,indicate the position of footnotes in the text and present the footnotes themselves separately at theend of the article.

ArtworkElectronic artworkGeneral points Make sure you use uniform lettering and sizing of your original artwork. Preferred fonts: Arial (or Helvetica), Times New Roman (or Times), Symbol, Courier. Number the illustrations according to their sequence in the text. Use a logical naming convention for your artwork files. Indicate per figure if it is a single, 1.5 or 2-column fitting image. For Word submissions only, you may still provide figures and their captions, and tables within asingle file at the revision stage. Please note that individual figure files larger than 10 MB must be provided in separate source files.A detailed guide on electronic artwork is available on our website:http://www.elsevier.com/artworkinstructions.You are urged to visit this site; some excerpts from the detailed information are given here.


FormatsRegardless of the application used, when your electronic artwork is finalized, please 'save as' orconvert the images to one of the following formats (note the resolution requirements for line drawings,halftones, and line/halftone combinations given below):EPS (or PDF): Vector drawings. Embed the font or save the text as 'graphics'.TIFF (or JPG): Color or grayscale photographs (halftones): always use a minimum of 300 dpi.TIFF (or JPG): Bitmapped line drawings: use a minimum of 1000 dpi.TIFF (or JPG): Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpiis required.Please do not: Supply files that are optimized for screen use (e.g., GIF, BMP, PICT, WPG); the resolution is too low. Supply files that are too low in resolution. Submit graphics that are disproportionately large for the content.Color artworkPlease make sure that artwork files are in an acceptable format (TIFF (or JPEG), EPS (or PDF), orMS Office files) and with the correct resolution. If, together with your accepted article, you submitusable color figures then Elsevier will ensure, at no additional charge, that these figures will appearin color online (e.g., ScienceDirect and other sites) regardless of whether or not these illustrationsare reproduced in color in the printed version. For color reproduction in print, you will receiveinformation regarding the costs from Elsevier after receipt of your accepted article. Pleaseindicate your preference for color: in print or online only. For further information on the preparationof electronic artwork, please see http://www.elsevier.com/artworkinstructions.Please note: Because of technical complications that can arise by converting color figures to 'grayscale' (for the printed version should you not opt for color in print) please submit in addition usableblack and white versions of all the color illustrations.Figure captionsEnsure that each illustration has a caption. A caption should comprise a brief title (not on the figureitself) and a description of the illustration. Keep text in the illustrations themselves to a minimum butexplain all symbols and abbreviations used.

TablesAll tables must be cited in the text, have titles, and be numbered consecutively with Arabic numerals.Table titles should be complete but brief. Information other than that defining the data should bepresented as footnotes. Only horizontal rules should be included and kept to a minimum.

ReferencesCitation in textPlease ensure that every reference cited in the text is also present in the reference list (and viceversa). Any references cited in the abstract must be given in full. Unpublished results and personalcommunications are not recommended in the reference list, but may be mentioned in the text. If thesereferences are included in the reference list they should follow the standard reference style of thejournal and should include a substitution of the publication date with either 'Unpublished results' or'Personal communication'. Citation of a reference as 'in press' implies that the item has been acceptedfor publication.Reference linksIncreased discoverability of research and high quality peer review are ensured by online links tothe sources cited. In order to allow us to create links to abstracting and indexing services, such asScopus, CrossRef and PubMed, please ensure that data provided in the references are correct. Pleasenote that incorrect surnames, journal/book titles, publication year and pagination may prevent linkcreation. When copying references, please be careful as they may already contain errors. Use of theDOI is encouraged.Web referencesAs a minimum, the full URL should be given and the date when the reference was last accessed. Anyfurther information, if known (DOI, author names, dates, reference to a source publication, etc.),should also be given. Web references can be listed separately (e.g., after the reference list) under adifferent heading if desired, or can be included in the reference list.References in a special issuePlease ensure that the words 'this issue' are added to any references in the list (and any citations inthe text) to other articles in the same Special Issue.


Reference management softwareThis journal has standard templates available in key reference managementpackages EndNote (http://www.endnote.com/support/enstyles.asp) and Reference Manager(http://refman.com/support/rmstyles.asp). Using plug-ins to wordprocessing packages, authors onlyneed to select the appropriate journal template when preparing their article and the list of referencesand citations to these will be formatted according to the journal style which is described below.Reference formattingThere are no strict requirements on reference formatting at submission. References can be in any styleor format as long as the style is consistent. Where applicable, author(s) name(s), journal title/booktitle, chapter title/article title, year of publication, volume number/book chapter and the paginationmust be present. Use of DOI is highly encouraged. The reference style used by the journal will beapplied to the accepted article by Elsevier at the proof stage. Note that missing data will be highlightedat proof stage for the author to correct. If you do wish to format the references yourself they shouldbe arranged according to the following examples:Reference styleText: Indicate references by number(s) in square brackets in line with the text. The actual authorscan be referred to, but the reference number(s) must always be given.Example: '..... as demonstrated [3,6]. Barnaby and Jones [8] obtained a different result ....'List: Number the references (numbers in square brackets) in the list in the order in which they appearin the text.Examples:Reference to a journal publication:[1] J. van der Geer, J.A.J. Hanraads, R.A. Lupton, The art of writing a scientific article, J. Sci. Commun.163 (2010) 5159.Reference to a book:[2] W. Strunk Jr., E.B. White, The Elements of Style, fourth ed., Longman, New York, 2000.Reference to a chapter in an edited book:[3] G.R. Mettam, L.B. Adams, How to prepare an electronic version of your article, in: B.S. Jones, R.Z.Smith (Eds.), Introduction to the Electronic Age, E-Publishing Inc., New York, 2009, pp. 281304.Journal abbreviations sourceJournal names should be abbreviated according to the List of Title Word Abbreviations:http://www.issn.org/services/online-services/access-to-the-ltwa/.

Video dataElsevier accepts video material and animation sequences to support and enhance your scientificresearch. Authors who have video or animation files that they wish to submit with their article arestrongly encouraged to include links to these within the body of the article. This can be done in thesame way as a figure or table by referring to the video or animation content and noting in the bodytext where it should be placed. All submitted files should be properly labeled so that they directlyrelate to the video file's content. In order to ensure that your video or animation material is directlyusable, please provide the files in one of our recommended file formats with a preferred maximumsize of 50 MB. Video and animation files supplied will be published online in the electronic versionof your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com.Please supply 'stills' with your files: you can choose any frame from the video or animation ormake a separate image. These will be used instead of standard icons and will personalize thelink to your video data. For more detailed instructions please visit our video instruction pages athttp://www.elsevier.com/artworkinstructions. Note: since video and animation cannot be embeddedin the print version of the journal, please provide text for both the electronic and the print versionfor the portions of the article that refer to this content.

AudioSlidesThe journal encourages authors to create an AudioSlides presentation with their published article.AudioSlides are brief, webinar-style presentations that are shown next to the online article onScienceDirect. This gives authors the opportunity to summarize their research in their own words andto help readers understand what the paper is about. More information and examples are available athttp://www.elsevier.com/audioslides. Authors of this journal will automatically receive an invitatione-mail to create an AudioSlides presentation after acceptance of their paper.


Supplementary dataElsevier accepts electronic supplementary material to support and enhance your scientific research.Supplementary files offer the author additional possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will bepublished online alongside the electronic version of your article in Elsevier Web products, includingScienceDirect: http://www.sciencedirect.com. In order to ensure that your submitted material isdirectly usable, please provide the data in one of our recommended file formats. Authors shouldsubmit the material in electronic format together with the article and supply a concise and descriptivecaption for each file. For more detailed instructions please visit our artwork instruction pages athttp://www.elsevier.com/artworkinstructions.

Open dataThis journal supports Open Data, enabling authors to submit any raw (unprocessed) research datawith their article for open access publication on ScienceDirect under the CC BY license. For moreinformation, please visit http://www.elsevier.com/about/research-data/open-data.

Mol filesMol files (optional): Elsevier would like to enrich your online article by visualizing and providing detailsof chemical structures you define as the main chemical compounds described. For this purpose,corresponding mol files can be uploaded via the online submission system. Each compound needsto be submitted as a separate mol file. Please use your preferred drawing tool to export chemicalstructures as mol files and ensure that they are unique, complete and do not contain any R-groups or other variables so that a correct InChI key can be generated. For more information seehttp://www.elsevier.com/mol.

Interactive plotsThis journal encourages you to include data and quantitative results as interactive plots with yourpublication. To make use of this feature, please include your data as a CSV (comma-separated values)file when you submit your manuscript. Please refer to http://www.elsevier.com/interactiveplots forfurther details and formatting instructions.

Submission checklistThe following list will be useful during the final checking of an article prior to sending it to the journalfor review. Please consult this Guide for Authors for further details of any item.Ensure that the following items are present:One author has been designated as the corresponding author with contact details: E-mail address Full postal address TelephoneAll necessary files have been uploaded, and contain: Keywords All figure captions All tables (including title, description, footnotes)Further considerations Manuscript has been 'spell-checked' and 'grammar-checked' All references mentioned in the Reference list are cited in the text, and vice versa Permission has been obtained for use of copyrighted material from other sources (including theInternet)Printed version of figures (if applicable) in color or black-and-white Indicate clearly whether or not color or black-and-white in print is required. For reproduction in black-and-white, please supply black-and-white versions of the figures forprinting purposes.For any further information please visit our customer support site at http://support.elsevier.com.

Additional InformationManuscripts Describing New Protein Structures. Once a paper describing a new protein structureis accepted for publication, the authors must be prepared to submit to the Protein Data Bank all of thestructural data required to validate the discussion, including both X-ray amplitudes and phases andthe derived atomic coordinates. If the paper discusses a protein structure only at the level of the mainchain alpha carbon atoms, then only alpha carbon coordinates need be deposited. Manuscripts willnot be published until confirmation has been received from the author that the required informationhas been sent to the Protein Data Bank.


If requested by the authors, the editors will ask the Data Bank not to distribute the information untila specified date. For coordinate lists this date may not be more than one year beyond the acceptancedate of the manuscript. For the full structure amplitude and phase data the time interval beforedistribution may not exceed four years. The release data specified by the author will appear in afootnote to the paper along with the statement that the information has been submitted to the ProteinData Bank. In the absence of a specified release date, it will be assumed that the information isavailable immediately on appearance of the publication.

AFTER ACCEPTANCEUse of the Digital Object IdentifierThe Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOIconsists of a unique alpha-numeric character string which is assigned to a document by the publisherupon the initial electronic publication. The assigned DOI never changes. Therefore, it is an idealmedium for citing a document, particularly 'Articles in press' because they have not yet received theirfull bibliographic information. Example of a correctly given DOI (in URL format; here an article in thejournal Physics Letters B):http://dx.doi.org/10.1016/j.physletb.2010.09.059When you use a DOI to create links to documents on the web, the DOIs are guaranteed never tochange.

Online proof correctionCorresponding authors will receive an e-mail with a link to our online proofing system, allowingannotation and correction of proofs online. The environment is similar to MS Word: in addition toediting text, you can also comment on figures/tables and answer questions from the Copy Editor.Web-based proofing provides a faster and less error-prone process by allowing you to directly typeyour corrections, eliminating the potential introduction of errors.If preferred, you can still choose to annotate and upload your edits on the PDF version. All instructionsfor proofing will be given in the e-mail we send to authors, including alternative methods to the onlineversion and PDF.We will do everything possible to get your article published quickly and accurately. Please use thisproof only for checking the typesetting, editing, completeness and correctness of the text, tablesand figures. Significant changes to the article as accepted for publication will only be considered atthis stage with permission from the Editor.It is important to ensure that all corrections are sent backto us in one communication. Please check carefully before replying, as inclusion of any subsequentcorrections cannot be guaranteed. Proofreading is solely your responsibility.

OffprintsThe corresponding author, at no cost, will be provided with a personalized link providing 50days free access to the final published version of the article on ScienceDirect. This link canalso be used for sharing via email and social networks. For an extra charge, paper offprintscan be ordered via the offprint order form which is sent once the article is accepted forpublication. Both corresponding and co-authors may order offprints at any time via Elsevier'sWebShop (http://webshop.elsevier.com/myarticleservices/offprints). Authors requiring printed copiesof multiple articles may use Elsevier WebShop's 'Create Your Own Book' service to collate multiplearticles within a single cover (http://webshop.elsevier.com/myarticleservices/booklets).

AUTHOR INQUIRIESYou can track your submitted article at http://help.elsevier.com/app/answers/detail/a_id/89/p/8045/.You can track your accepted article at http://www.elsevier.com/trackarticle. You are also welcome tocontact Customer Support via http://support.elsevier.com.

Copyright 2014 Elsevier | http://www.elsevier.com

Documents

0162-0134