01 Conductivity Meter

Embed Size (px)

Citation preview

  • 8/10/2019 01 Conductivity Meter

    1/11

    1.1

    i ii

    iii iv

    v vi

    vii viii

    ix

    1.3

    1.4 1.5

    1.6 1.7

    1.9

    DIGITAL CONDUCTIVITY METER

    ---

    Name:

    Sl. No.:

    NIL O&E 1000-0911

    HANNA

    Norwest Industries Ltd

    House # 517/2, Road # 10 (West Side)

    DOHS, Baridhara, Dhaka # 1206

    Bangladesh

    Description identification of item to be calibrated:

    Form No.: FM/22A

    CALIBRATION CERTIFICATE OF: DIGITAL

    CONDUCTIVITY METER

    ELECTRO METER CORPORATION

    P- 5, C.I.T ROAD, KOLKATA - 700014.

    Page: 1/1CALIBRATION CERTIFICATE NO.: EMC-NIL-OCT-2014-01

    NW-01-10-14

    ISSUED TO:

    Service Request / Order No.:

    Applicable specification of item to be calibrated: Accuracy / permissible limit: Not specified

    1.0

    1.2

    Code No.:

    Make:

    Range:

    Resolution:

    As per Test Result

    1 S

    ---

    Model / Type No.:

    Sensor:

    Location:

    Primo 5

    --

    Comparison Method

    Conductivity

    Error (S)

    101

    Traceability : Standard Conductivity Solution (100 S, 500 S, 1413 S)2.0

    1413

    3500

    -131400

    Basis of calibration:

    CALIBRATION RESULTS

    Parameter / Range Nominal Value On DUC (S) Standard Value (S)

    Calibrated by: Checked & approved by:

    Date: 1-10-14 Date: 1-10-14

    Measurement uncertainty (95% of confidence level & At a coverage factor 1.96 ): 0.572 S

    Remarks:Performance check has been carried out since the accuracy of DUC was not specified by the customer.

    DUC- Device under calibration F.S.-Full Scale

    1100

    503

    Physical status of the DUC: OK

    Frequency of calibration:

    64% RH

    Temperature:

    Date of receipt of item:

    Calibration valid upto:

    1-Oct-2014

    30-Sep-2015 12 months

    1.8 Environmental condition

    during calibration

    Date of calibration: 1-Oct-2014

    20C 2C

    Humidity:

  • 8/10/2019 01 Conductivity Meter

    2/11

    Date : 13/05/2011

    Duc reading standerd scale reading Rev. : 0

    1.025 0.0004

    0.0004

    CALIBRATION CERTIFICATE NO.: S-V8-EMC-FF-NRST-2-Sep-2013-NW-34-09-13

    1.028 0.00040.0004

    1.029 0.0004

    0.0004

    1.0295 0.0004

    0.0004

    1.033 0.0004

    0.0004

    Duc reading

    1.025

    1.028

    1.029

    1.0295

    1.033

    Uncertanity of hydrometer:

    Graduation of duc hydrometer Uw=

    A type Uncertanity Ua=Uw/2*SQRT(3)=

    1.024

    1.024

    1.0291.029

    1.0285

    1.031

    1.0285

    1.028

    1.028

    1.031

  • 8/10/2019 01 Conductivity Meter

    3/11

    Uncertanity due to standed used

    Uncertanity as reported for 1st hydrometre=Us1/k

    Uncertanity due to temp correction

    Combined uncertanity=SQRT(Ua*Ua+Us*Us+Utc*Utc)=

    Expanded uncertainty at 95% CL =

    Us=SQRT(((Us1*Us1)+(Us2*Us2))4)=

    Uncertanity as reported for 2st hydrometre=Us2/k

    Utc= TC/(2*SQRT(3))

  • 8/10/2019 01 Conductivity Meter

    4/11

    Temp correction Actual re Date : Scale error

    -0.000307 1.02409 0.00091

    -0.000307 1.02409 0.00091

    -0.000309 1.02909 -0.00109-0.000309 1.02909 -0.00109

    -0.000309 1.028591 0.00041

    -0.000309 1.028591 0.00041

    -0.000308 1.028092 0.00141

    -0.000308 1.028092 0.00141

    -0.000309 1.03109 0.00191

    -0.000309 1.03109 0.00191

    Std reading Error

    1.02409 0.00091

    1.02909 -0.00109

    1.02859 0.00041

    1.02809 0.00141

    1.03109 0.00191

    0.002

    0.00057735 3.333E-07

  • 8/10/2019 01 Conductivity Meter

    5/11

    0.00025 6.25E-08

    0.00025 6.25E-08

    0.000176777 3.125E-08

    0 0

    0.001207615

    0.00052

    0.000603807

  • 8/10/2019 01 Conductivity Meter

    6/11

    mean error

    0.00091

    CALIBRATION CERTIFICATE OF: CONDUCTIVITY METER

    mean error-0.00109

    mean error

    0.00041

    mean error

    0.00141

    mean error

    0.00191

    Front page

    fixed

    to be changed

  • 8/10/2019 01 Conductivity Meter

    7/11

    Duc reading standerd scale reading certificate correction

    1.025 0.0004

    0.0004

    1.028 0.00040.0004

    1.029 0.0004

    0.0004

    1.0295 0.0004

    0.0004

    1.033 0.0004

    0.0004

    Duc reading

    1.025

    1.028

    1.029

    1.0295

    1.033

    Uncertanity of hydrometer:

    Graduation of duc hydrometer Uw=

    A type Uncertanity Ua=Uw/2*SQRT(3)=

    1.0285

    1.0285

    1.024

    1.024

    1.0291.029

    1.028

    1.028

    1.031

    1.031

  • 8/10/2019 01 Conductivity Meter

    8/11

    Uncertanity due to standed used

    Uncertanity as reported for 1st hydrometre=Us1/k

    Uncertanity due to temp correction

    Combined uncertanity=SQRT(Ua*Ua+Us*Us+Utc*Utc)=

    Expanded uncertainty at 95% CL =

    Utc= TC/(2*SQRT(3))

    Uncertanity as reported for 2st hydrometre=Us2/k

    Us=SQRT(((Us1*Us1)+(Us2*Us2))4)=

  • 8/10/2019 01 Conductivity Meter

    9/11

    Temp correction Actual reading Scale error

    -0.000307 1.02409 0.00091

    -0.000307 1.02409 0.00091

    -0.000309 1.02909 -0.00109-0.000309 1.02909 -0.00109

    -0.000309 1.028591 0.00041

    -0.000309 1.028591 0.00041

    -0.000308 1.028092 0.00141

    -0.000308 1.028092 0.00141

    -0.000309 1.03109 0.00191

    -0.000309 1.03109 0.00191

    Std reading Error

    1.02409 0.00091

    1.02909 -0.00109

    1.02859 0.00041

    1.02809 0.00141

    1.03109 0.00191

    0.002

    0.00057735 3.333E-07

  • 8/10/2019 01 Conductivity Meter

    10/11

    0.00025 6.25E-08

    0.00025 6.25E-08

    0.000176777 3.125E-08

    0 0

    0.001207615

    0.001

    0.000603807

  • 8/10/2019 01 Conductivity Meter

    11/11

    mean error

    0.00091

    mean error-0.00109

    mean error

    0.00041

    mean error

    0.00141

    mean error

    0.00191

    Front page

    fixed

    to be changed