002-Profile of adhesive3.imimg.com/data3/YG/UV/MY-3408020/m-seal-phataphat.pdf · 2013-08-30 · Anabond Microloc precoated adhesive system are solvent based, Encapsulated, user-friendly

1

PRIYA COMPONENTS - 9925023362

PRIYA COMPONENTS 4/A Anupam Nagar, B/h Rajvee Towers,Old Padra Road, Baroda – 390 020

Ph. No. : 0265-6552860 M : 9925023362 E-Mail : [email protected]

Dear Sir / Madam,

We take a lot of pleasure to introduce our Firm : M/s. Priya Components as one

of the stockiest and supplier of Adhesives & Sealants make of Pidilite,

Araldite, Loctite, Anabond, Speb 7, Waud, Hard Castle etc.

Product Range

1) M Seal (GP)

2) M Seal Phataphat

3) M Seal White

4) Fevikwik (1gm, 2gm, 3 gm)

5) Fevikwik 203

6) PVC Insulation Tape – Steelgrip

7) Fevicol Thread Lockers

8) Fevitite Epoxy Adhesive

9) Araldite Adhesives

10) Fevibond

11) Fevicol Rubber based Adhesive

a. Fevicol 998 FW

b. Fevicol 707 FW

12) Gasket Sealant

a. M – Seal 55

b. M – Seal R10

13) Speb 7 Adhesive

a. Multipurpose

b. Spray Grade

c. FWG-711

d. Premium SR-911

e. PU-7

14) JOINSIL 1018 Silicon Sealant

15) Hold Tight Sealant

2


16) Anabond Adhesives & Sealants

a. Anaerobics

i. Thread Locker

ii. Bearing Retainers

iii. Pipe Sealant

iv. Liquid Gasketing

b. RTV Silicones

i. One Part System

ii. Two Part System

c. Cyanoacrylates

d. Epoxy

i. One Part System

ii. Two Part System

e. Rubber Based

i. Solvent based Neoprene Adhesives / Sealants

ii. Liquid Gasket Maker

iii. Break shoe Bonding Adhesive

iv. Non – curing Butyl Mastic Putty & Tape

v. Sound Dampening Pads

f. Polyurethane

i. One Part System

ii. Two Part System

g. Lubricants

i. Silicone Grease

ii. Thermally conductivity Heat Sink Compound

iii. Anti – seize Compound

h. Industrial Cleaners

i. Polysulphide Sealant

j. Acrylic Sealant

17) Loctite – Threadlocker, Thread Sealant, Gasket Sealant, Retaining

compound, Primer etc.

3


M – SEAL (General Purpose - GP)

Features & Benefits

• M-Seal is a two component epoxy putty having excellent adhesive properties and resistance to chemicals, etc. It is moldable. Ease of mixing. Cures to a hard mass. Can be shaped, drilled, filed, sanded, painted upon.

• Available in Pack of 60 gms, 75 gms, 100 gms, & 1 Kg

M – SEAL Phataphat

Features & Benefits

• It is all the same features and benefits of M-Seal (General Purpose) only difference is functions more faster than General Purpose.

• Available in Pack of 250 gms, 1Kg.

M – SEAL White

Features & Benefits

• Moldable into different shapes.

• Cures to hard mass for long lasting sea. Withstands temperature up to 120°C. Available in different variants

• M-Seal white (for a white finish).

Fevikwik (1gm, 2gm & 3gm)

Features & Benefits

• Bonds in an instant.

• Withstands temperature from -40°c to 90°c.

• Clog resistant nozzle, preventing wastage.

Fevikwik - 203

Features & Benefits

• Fast setting - therefore faster production on assembly line.

• Excellent bond for a variety of surfaces.

• Ready to use product, no mixing required.

• Excellent chemical resistance.

4


PVC Insulation Tape - Steelgrip

Features & Benefits

India`s first Insulation tape with an ISI mark. Self-extinguishing, does not allow source of fire to spread. Waterproof, weatherproof and non-ageing. Provide long lasting insulation. Maintains insulation in different usage and temperature conditions.

Typical Properties

No. Parameters Observed Values

1. Thickness of tape in mm 0.10 - 0.15

2. Adhesion to steel N/10 mm width 1.6 / 10 mm width minimum

3. Adhesion to Backing N/10 mm width 1.3 / 10 mm width minimum

4. Tensile Strength N/10mm width per mm thickness minimum 150 N/10 mm width per mm thickness, minimum

5. Electric Strength at room temp. (KV/mm) 40 KV/mm minimum

6. Electric Strength after humid conditioning or water immersion for 24 Hrs. at 27+ 20 C & 93 + 2 % RH

35 KV/mm minimum

7. Flammability Self Extinguishing

8. Electrolytic Corrosion No Corrosion of Cu wire

9. Stability to Accelerated Aging at 65 + 10C & 80% Relative Humidity for 96 Hr.N/10 mm width

No deterioration of change in properties of the backing Minimum 1.3N/10mm width

10 Insulation Resistance in Ohms 1.0 x 10" ohms minimum

Fevicol Thread Lockers

Features & Benefits Withstands heavy vibration. Prevent corrosion and replace Nyloc nuts. Can be used for high strength applications. Can be dismantled with mechanical tools. Superior to conventional locking devices. Available in five variants.

Fevitite Epoxy Adhesive

Features & Benefits

• Provides strong durable bond.

• Bond withstands temperature from -50°C to 120°C.

• Available in different variants.

• Normal setting (EPX/A1).

• Rapid setting (EPX Rapid), sets in 5 minutes.

5


Araldite Adhesives

We offer our clients a wide range of very strong

Araldites, which is known for its fast setting

property. These adhesives are extensively used for

binding products of ceramics, wood, chipboard,

glass, metal and most hard plastic. Araldite

adhesives can set in around 15 minutes, and can

easily be sanded and/or painted when dry.

Fevibond

Technical Specifications

• Used for bonding leather, rubber, metal, wood, canvas, rexine to foam./ wood./ cardboard, stick glass to ceramic, metal, canvas, PVC tiles to floors, joins rubber bead to vehicle door, repairing leather goods etc.

Features & Benefits

• Provides flexible bond, resistant to water, oil and alkalis.

• Does not contain harmful benzene thus safe to work with.

Packing

• Tube pack - 10ml, 20ml, 50ml.

FEVICOL RUBBER BASED ADHESIVE

Fevicol 998 FW

Features & Benefits Excellent bonding strength for high stress shoes & sandals. Does not contain benzene. Consistent quality.

Fevicol 707 FW

Features & Benefits Higher coverage. Superior bonding strength. More open time - better productivity. No settlement. Not contain benzene.

6


Hold Tight Sealant

We are instrumental in providing our clients a extensive range of Holdtite

Liquid Sealant, which comes under the

brand name of Hawco. Introduced in 1943, our range widely caters to the

needs of plumbing industry and is used

as a pipe jointing sealant. It prevents leakage of fluids and gas through pipe

joints, used in construction segment and

auto segment. These are single component black liquid, where no mixing

is required before usage and applying.

Our range is known for its good adhesion which widely helps in jointing

substances.

Specification:

Packs : 1 kg, 500 gms, 200 gms, 100 gms , 50

gms , 20 gms.

GASKET SEALANT M-SEAL M – Seal 55

Features & Benefits Sets into a soft and pliable film, thus flanges/assemblies can be dismantled easily. N paste form, covers the surface uniformly. Withstands temperature up to 120°C. Easy to clean from surface, film can be peeled off easily without damaging the surface.

M – Seal R10

Features & Benefits

Forms a flexible rubbery bead. In paste form with excellent ability for filling gaps. Withstands temperature up to 140°C. Easy to apply, no need for a separate gasket.

Joinsil – 1018 Silicon Sealant

Description Low modulus, one part, acetoxy curing at room temperature silicone sealant for general purpose. Offer good adhesion and performance in interior and exterior applications.

7


ANABOND ADHESIVES & SEALANTS

Anaerobics

Anaerobics – Thread Locker

� Anabond thread lockers eliminates

conventional locking methods like lock

plates, star and spring washers and nyloc

nuts.

� Produces fail-safe fastener assemblies to

withstand heavy vibration

� Cured adhesive retains tightened torque.

� Anabond’s Thread locking anaerobic

adhesives provide a 100% leak free seal.

� Easy to dismantle.

Application areas

For locking threaded screws, studs, bolts and nuts

of various sizes and shapes

Anaerobics – Bearing Retainers

� Anabond bearing retainers are formulated

in a selection of viscosities, gap-filling

ability and in strength characters.

� It is easy to assemble the components with

clearance or transition fits.

� It dampens vibration and provides even

distribution of load.

� Can be dismantled by using normal tools.

Application areas

For retaining cylindrical parts such as bearings,

bushes, shafts, gears, cup plugs and splines, etc.

Anaerobics – Pipe Sealant

8


� Anabond pipe sealants eliminate the use of

PTFE tapes.

� It prevents leakage and loosening the joints

due to vibration.

� Immune to oils, solvents and a host of

process fluids.

� Withstand pressure up to 400kg/cm2.

� Anabond pipe sealants facilitate positioning

of elbow joints and gauges.

Application areas

For sealing all threaded joints in hydraulic,

pneumatic and steam pressure lines, etc

Anaerobics – Liquid Gasketing

� Anabond liquid gaskets are safer and

superior to conventional pre-cut gaskets.

� It fills surface irregularities and provides

leak proof joints.

� Resistance to wide range of chemicals, oils

and fuels.

� Formed gasket does not creep, shrink or

relax.

� Anabond liquid gaskets withstand pressure

up to 120 kg/cm2.

Application areas

Replace conventional gaskets machined flange

surfaces (upto 63 microns)

For sheet metal cover and unmachined surface see

RTV Silicones for details.

Anaerobics – Microencapsulated Precoat Adhesive

Anabond Microloc precoated adhesive system are solvent based, Encapsulated, user-friendly acrylic

9


based, ambient curing adhesives suitable for preventing vibration loosening of threaded fasteners.

These precoat adhesives are well designed to form uniform coating on the fastners. This coating

process converts ordinary fastners into user-friendly self locking fastners.

Dry to touch, microloc precoated adhesive become integral part of the fastner and remain inert until the

shearing action takes place, During shearing, the microcapsules break and release the adhesive which

will eventually polymerize into a tough cured polymeric network. This polymeric network formed

between the mating fastners works just in the same way a polymer formed from conventional liquid

type anaerobic adhesives. This locks and seals the parts against vibration loosening and shock.

Features

� Ideally suitable for high volume applications

� Totally eliminates on-line applications

� No wastage and no spillage

� Dry-to-touch makes the product ideally suitable for operator handling.

� Less assembly time

� Provides sealing against gases and fluids

� Excellent Chemical and Oil resistant

� Provides uniform stress distribution

Application areas

For Flywheel set bolts, Engine-block studs, Plug-head tapered screws, Differential gears studs, Intake-

manifold mounting bolts, Seatbelt mounting bolts, Seat fixing bolts, Starter screws, Threaded Plugs,

Shock absorbers in Automotive industries.

RTV Silicones

RTV Silicones – One Part System

10


� Anabond RTV Silicone sealants are widely

used for making high performance, low-

cost form-in-place gaskets.

� Cured silicone rubber does not set under

prolonged compression.

� Use of Anabond RTV silicones eliminates

finer surface finishing processes.

� Anabond RTV silicones adhere to metals,

painted surfaces, glass, ceramic and

plastics.

� Withstand temperature upto 300°C.

� Anabond’s RTV single part potting

compounds are clear in colour suited for

encapsulating electronic components. Application areas

Used for sealing, bonding, potting and gasketing in

Automotive industries, electrical and electronic

industries and construction industry.

RTV Silicones – Two Part System

� Anabond’s RTV two part silicones are

widely used for potting applications in

Electrical and Electronic industries.

� It is mainly used to prevent ingress of

moisture, dirt and corrosive atmosphere.

� The cured silicone exhibits high strength

and negligible shrinkage.

� It possesses a very good di-electric

strength.

Application areas

Used for potting PCB’s in appliance, automotive

and other electronic industries..

11


Cyanoacrylates

Anabond cyanoacrylate adhesives are one-part

acrylate adhesives that cure instantly on contact

with mated surface through a reaction with surface

moisture. Cyanoacrylate are commonly called as

Super Glues. Cyanoacrylate adhesives have high

strength and excellent adhesion to a wide variety of

substrates. Anabond cyanoacrylate systems are

offered in a wide range of viscosities, curing time,

gap filling, shear strength and temperature ranges.

Features

� Instant bonding adhesive.

� Ease of application.

� Bonds similar and dissimilar substrates.

� 100% reactive systems.

� High viscosity provides maximum gap

filling.

� Resistance to most chemicals, oils and

solvents.

� Temp. range from -80°C to +80°C.

Application areas

Bonds materials like leather, metal, ceramic,

rubber, wood & plastics like ABS, polycarbonate,

acrylic, PVC etc.

Epoxy

Epoxy - One Part System

� Anabond single component epoxy systems

are heat-curing adhesives, which exhibits

exceptional bonding strength on curing.

� No need for mixing or degassing, hence

easy to apply.

� The easiness of application allows

automation of production lines, with labour

saving equipment.

� 100% reactive systems, which does not

shrink over a period of time.

� Withstands high temperature.

Application areas

Magnet bonding, coil sealing, needle bonding and

chip bonding in various industries.

12


Epoxy - Two Part System

� Anabond two part epoxy compound are

room temperature curing.

� Anabond epoxies cures to produce a tough

durable coat or patch/bond and possess

excellent resistance to water.

� It provides excellent dampening character.

� Possesses good adhesion on glass,

metals, wood, paper, ceramics, leather,

etc.

� It also exhibits good di-electric properties.

Application areas

Used for patching and sealing application on

various substrates like concrete, wood, metal,

fiberglass etc. It is used as potting compound and

coating compound for waterproofing application.

Rubber Based

Solvent based Neoprene Adhesives / Sealants

Anabond solvent based adhesives are single component, room temperature curing, rubber based, liquid adhesives. It cures by solvent evaporation into a tough flexible rubber. These adhesives exhibit excellent adhesion to most substrates including rubber, glass, plastics and painted metal.

Liquid Gasket Maker

Anabond Rubber based Gasket makers are solvent evaporating system and ingredients were selected so as to have high solid content and excellent resistance to petrol, oil and water. It is safer, surer and superior to conventional pre-cut gaskets. Eliminates the need for super finishing of flange surfaces. It also offers excellent temperature resistance.

13


Break Shoe Bonding Adhesive

Anabond Rubber based structural adhesive is a synthetic resin based, designed specially for bonding friction lining material in Brake-shoes and clutches. The product has exceptionally high strength to withstand very high shear loads prevalent between liner and brake-shoes / clutch plates. The strength is returned at very high temperatures so that the lining is bonded firmly even under severe working conditions.

Non – Curing Butyl Mastic Putty & Tape

Anabond Non-curing Butyl Mastic Putty & Tape are Elastic, Non-curing and highly tacky compounds, possessing excellent peel strength.

They are designed basically to adhere to a wide range of surfaces for sealing, vibration dampering and effectively prevent passage of air, moisture and dust between components. They display good adhesion with painted sheet metal and remains non-hardening over its life time.

Sound Dampering Pads

Anabond sound dampeners provide the Millennium technology for noise reduction in Automobile, Air-conditioners and Gensets. These combine the versatility of flexibility and ease of application with efficient damping power. They exhibit excellent tack, chemical resistance and weathering resistance.

Specification

Properties Unit Specification

Appearance -- Strip

Colour -- Black

Dimension mm 250x100x2 / 100x62.5x1.3 / 550x100x2

Spcific Gravity -- 1.15 to 1.25

Packing -- Pads and as per customer requirement

14


Polyurethane

One Part System

� Anabond polyurethane one part system are used for bonding, sealing, potting wide range of substrates such as steel, aluminium, stainless steel, ABS, flexible polyurethane, rigid polyurethane, PVC & wood.

� It possesses good weatherability and excellent mechanical properties.

� Excellent electrical insulating properties. � Bonds a variety of similar and dissimilar

materials. � Good paintability.

Application areas

Used as roof sealing in bus bodies, PCB potting, capacitor potting and also as conformal coating.

Two Part System

� Anabond two part PU compounds are room temperature curing, suitable for electrical and electronic industries.

� The cured compound provides excellent resistance towards moisture, oil, dust and industrial solvents.

� It provides excellent dampening characteristics.

� It has better hardness to withstand high stress.

Application areas

Used for potting PCB’s, capacitors and transformers. Also used for filter bonding and as laminating adhesives in automotive industries.

15


Lubricants

Silicone Grease

� Anabond’s Silicone Grease is a single component modified silicone system. It does not harden or dry out or melt even after 1000 Hours @ 200°C, which shows good di-electric & lubricating properties.

� It readily wets and adheres to dry surfaces of metals, ceramics, rubbers, plastics & all insulating materials, giving them very high surface resistivity even under moisture condensing conditions.

Thermally Conductive Silicone Grease (Heat Sink Compound)

Anabond’s Thermally conductive Heat Sink Compound’s are single component modified silicone system.

This product finds versatile applications like mounting studs of transistors, diodes and silicone rectifies to provide effective heat seal and to improve conductivity at heat sink junctions.

Features

� It fills even minute air gaps between the

mating surface & thereby reducing the thermal impedance.

� This product is a thermally conductive but electrically insulating system.

� It will not harden or dry out or melt even after 1000 hours @ 200°C with good single component modified silicone system suitable for heat sink application.

Application areas

This product finds application in mounting studs of transistors, diodes and silicone rectifiers to provide effective heat seal and to improve thermal conductivity at heat sink junctions.

16


Anti – Seize Compound

Anabond’s anti-seize compound prevents seizure in bolts and nuts, studs due to extreme temperature in any object. Anti-seize compounds are used as a lubricant in gears, chains, cables, sprockets, rollers and hinges of machines and equipments

It eliminates galling & cold welding of threaded assemblies and prevents seizing corrosion in press fitted assemblies and fasteners.

Features

� Prevents seizure in bolts and nuts, studs due to extreme temperature.

� Used as a lubricant in gears, chains ,sprockets, rollers and hinges of machinery equipments.

� Ensures proper torque, eliminates thread seizure in aluminum and stainless steel bodies.

� Heavy interference fit sprockets and gears are assembled and pulled easily.

� Reduces corrosion and seizing in Fertilizer plants due to strong chemical action and weathering.

Industrial Cleaners

Anabond AB-60 is a multipurpose spray lubricating of moving parts, loosening of rusted

bolts & nuts, and also used for cleaning oil, wax, greases etc.

Anabond AB-20 is a fast drying superior contact cleaner used for cleaning electronic

contacts, relays, circuit boards and switch terminals.

17


Anabond AB-40 is a heavy duty industrial cleaner used for removal of oil, dirt, wax, &

greases from heavy equipments & machineries.

Anabond Releez is a specially formulated maintenance solution for cleaning and

removel of rusted and jammed parts.

Anabond Bio-green is a biocompatible cleaner & degreaser which is used to remove

oils, grease, fuels, lubricants & rust particles from machine parts.

Polysulphide Sealant

Anabond Tuffseald Polysulphide sealant is a universally usable for concrete joint sealant and industrial insulation glazing sealant. This is two part system. After mixing Resin and Hardener, the polymerization is initiated at room temperature, which proceed further until it is cured.

Features

� It has good adhesion properties.

� It is mainly used as a fuel resistant sealant.

18


Acrylic Sealant

Anabond 777 is high quality dispersion based acrylic sealant exhibiting high elastic recovery and

good low temperature flexibility. It is easy to apply and provides a permanently flexible seal

between a variety of surfaces without using a primer. The product is an exclusive product

developed for Automobile applications.

Features

� Ease of application � Excellent resistance to ageing. � High Flexibility � Excellent over coating properties � Good adhesion to moisture or wet surface � No wrinkling of surface � Equipment can be readily cleaned with water � Good adhesion on concrete, steel, aluminum, wood and plastic � System contains on oil that could bleed out during ageing

Specification

Properties Unit Specification

Appearance -- Smooth Paste

Colour -- Milky White

Volatile Content (105±2°C, 3hrs) % 12 - 20

Spcific Gravity at 25°C -- 1.65 ±0.05

Full cure Days 7

Tack free time Minutes 6 - 15

Tensile Strength Kg/cm2 3 (min)

19


Elongation % 450 (min)

Hardness Shore A 30 (min)

Packing -- 450gms.

Shelf Life Months 12

LOCTITE ADHESIVES & SEALANTS

Thread Lockers, Thread Sealant, Gasket Sealant, Retaining

compound, Primer etc.

20


SPEB – 7 ADHESIVES

Speb – 7 Mulitpurpose

Speb-7 Multil Purpose synthetic rubber adhesive has high cohesive strength at room and elevated temperature.

Feature and Benefits: 1. Multi-purpose adhesive 2. Ideal Viscosity gives superior

coverage 3. Excellent bonding strength 4. Does not contain benzene

Pack Sizes: 50ml, 125ml, 250ml, 500ml, 1Ltr, 2 Ltr, 5 Ltr, 25 Ltr.

Speb – 7 Spray Grade

Speb-7 Spray Grade is specially developed for industries like uphoistery; bus body where the quantity of adhesive used is high, in order to get better coverage, faster production, high bonding strength and faster bonding. Feature and Benefits:

1. Sprayable adhesive ensures productivity and superior coverage

2. High heat resistant 3. Good initial grab and fast bonding 4. Does not contain benzene

Pack Sizes: 5 Ltr, 25 Ltr.

21


Speb – 7 FWG-711

Speb-7 FWG-711 grade has been specially developed for the footwear industry. Feature and Benefits:

1. Better Productivity and high coverage 2. Excellent bonding strength for high-

stress shoes and sandal 3. No settlement 4. Does not contain benzene

Pack Sizes: 500ml, 1 Ltr, 5 Ltr, 25 Ltr.

Speb – 7 Premium SR-911

SPEB-7 PREMIUM SR-911 is a high bond multipurpose adhesive with a high cohesive strength. Applied in the below industries and many more where the bond strength required is high or the application is critical. Feature and Benefits:

1. Excellent bond strength 2. Better productivity & high coverage. 3. No settlement. 4. Does not contain harmful Benzene.

Pack Sizes: 100ml, 200ml, 500ml, 1 Ltr, 5 Ltr, 25 Ltr.

Speb – 7 PU-7

SPEB-7 PU-7 is a Polyurethane Adhesive for footwear industry.

Feature and Benefits: 1. Two Component Adhesive. 2. Idol Viscosity. 3. Better Coverage. 4. High Bond Strength.

Pack Sizes: 1 Ltr, 5 Ltr, 25 Ltr.

We would be highly obliged if you could enroll our name in your esteemed Vendor list for

procurement of the above material. For further clarifications and business queries, please

feel free to call on us at our numbers. Looking forward to a positive business response from

you.

Documents

002-Profile of adhesive3.imimg.com/data3/YG/UV/MY-3408020/m-seal-phataphat.pdf · 2013-08-30 · Anabond Microloc precoated adhesive system are solvent based, Encapsulated, user-friendly