000-037_TSM Cerfification for 6.1

5/25/2018 000-037_TSM Cerfification for 6.1

1/69

QUESTION NO: 1

A company is mandated to retain all archived data for seven years. Which two parameters must

be added to the DEFINE COPYGROUP command to support this policy? (Choose two.)

A. RETMIN=7

B. RETVER=2555C. MODE=ARCHIVE

D. TYPE=ARCHIVE

E. RETINIT=CREATION

Answer: B,D

QUESTION NO: 2

A company is creating an archive retention server and has a requirement that archives cannot be

deleted before the retention period has passed. Which command prevents an archived object from

being deleted?

A. SET ARCHIVELOCK ON

B. SET RETENTIONLOCK ON

C. SET ARCHIVERETENTIONLOCK ON

D. SET ARCHIVERETENTIONPROTECTION ON

Answer: D

QUESTION NO: 3

Which parameter is used with the DEFINE COPYGROUP command to specify the number of days

to retain a backup version after that version becomes inactive due to a new active version?

A. RETMIN

B. RETVER

C. RETONLY

D. RETEXTRA

Answer: D

QUESTION NO: 4

A company's Service Level Agreement states that during a data restore, the Accounts Payable

department systems receive priority. Which feature expedites restoring this data?

IBM 000-037: Practice Exam

"Pass Any Exam. Any Time." - Guaranteed 2


2/69

A. Client Polling

B. Collocation by Group

C. Automatic Reconciliation

D. Dynamic Data Consolidation

Answer: B

QUESTION NO: 5

A company must limit the size and number of files stored in the storage pool. Which two features

reduce the amount of data backed up? (Choose two.)

A. Include-Exclude List

B. Journal-Based Backup

C. Client Side Backup Sets

D. Client Side DataDeduplication

E. Server Side DataDeduplication

Answer: A,D

QUESTION NO: 6

According to a company's Service Level Agreement, three versions of a file must be retained after

the file is removed from the client system. Which parameter should be used when defining the

backup copy group?

A. RETVER=3

B. RETEXTRA=3

C. VEREXISTS=3

D. VERDELETE=3

Answer: D

QUESTION NO: 7

In a newly installed Windows 2008 Server system, a production IBM Tivoli Storage Manager V6.2

(TSM) server must be installed and set up. What are the first two steps in the installation process?

(Choose two.)

A. Check the IBM website for supported platforms.

B. Check the TSM documentation and ReadMe files.




3/69

C. Check the IBM website for end of support information.

D. Check the operating system level and installed patches.

E. Call IBM Support to ask for open issues and known problems.

Answer: A,B

QUESTION NO: 8

Which step is required prior to the installation process of a new IBM Tivoli Storage Manager (TSM)

server on AIX?

A. Confirm a web browser is set up properly and Java is enabled.

B. Ensure the tape library and drives are installed and configured completely.

C. Verify the operating system is supported and all necessary maintenance is included.

D. Ensure the network interface is available and configured with a minimum speed of 1Gbit.

Answer: C

QUESTION NO: 9

What are two IBM supported information sources for installing an IBM Tivoli Storage Manager

(TSM) server? (Choose two.)

A. IBM Tivoli Wiki

B. Business Partner Knowledge Base

C. Common TSM List Server - adsm.org

D. IBM Tivoli Storage Manager Installation Guide

E. IBM Redbook for IBM Tivoli Storage Manager Technical Guide

Answer: A,D

QUESTION NO: 10

Which statement is true for implementing an IBM Tivoli Storage Manager V6.2 (TSM) server

environment?

A. TSM server application is not supported on Mac OS; the customer must decide on another

platform to run the TSM server.

B. TSM server application on Mac OS requires an Intel processor to operate because there is nosupport for Mac PowerPC.

C. TSM server application for Mac is only supported on Mac OS V10.6 and higher; but there is no

SAN Discovery available for that platform.




4/69

D. TSM server application on Mac OS V10.6 is introduced with TSM V6.2 and provides all

functionality as a TSM server on AIX, Linux, Solaris, and Windows.

Answer: A

QUESTION NO: 11

What is the minimum memory requirement for an IBM Tivoli Storage Manager V6.2 server

(Windows, Linux, AIX) environment when using deduplication?

A. 8 GB

B. 12 GB

C. 16 GB

D. 24 GB

Answer: C

QUESTION NO: 12

Which protocols can be used on an IBM Tivoli Storage Manager V6.2 server on AIX?

shared memoryTCP/IP V4

TCP/IP V6

A. 1, 2

B. 2, 3

C. 1, 3

D. 1, 2, 3

Answer: D

QUESTION NO: 13

There are three servers in an enterprise network with valuable file system data that must be

backed up by an IBM Tivoli Storage Manager (TSM) schedule. There are three file servers. How

many TSM nodes must be configured at the TSM server?

A. 1 nodeB. 3 nodes

C. 5 nodes




5/69

D. 7 nodes

Answer: B

QUESTION NO: 14

A lab has 10 workstations and data that must be backed up on just five of the workstations. How

many IBM Tivoli Storage Manager (TSM) nodes will be required to back up the workstations on

the TSM server?

A. 5 nodes

B. 6 nodes

C. 7 nodes

D. 10 nodes

Answer: A

QUESTION NO: 15

With four servers to back up, how many IBM Tivoli Storage Manager (TSM) nodes are registered

on the TSM server?

A. 2 nodes

B. 3 nodes

C. 4 nodes

D. 6 nodes

Answer: C

QUESTION NO: 16

A customer needs to protect and save critical Microsoft Exchange e-mail data for three years.

They also need to protect other files, Oracle databases, and VMWare servers for at least 30 days.

Which products should the customer implement in order to protect their environments?

A. IBM Tivoli Storage Manager Extended Edition, IBM Tivoli Storage Manager for Databases, IBM

Tivoli Storage Manager for Mail

B. IBM Tivoli Storage Manager Extended Edition, IBM Tivoli Storage Manager for VCB, IBM Tivoli

Storage Manager for Databases, IBM Tivoli Storage Manager for MailC. IBM Tivoli Storage Manager Extended Edition, IBM Tivoli Storage Manager for Databases, IBM

Tivoli Storage Manager for VCB, IBM Tivoli Storage Manager for Exchange




6/69

D. IBM Tivoli Storage Manager Extended Edition, IBM Tivoli Storage Manager for Oracle

Database, IBM Tivoli Storage Manager for Exchange, IBM Tivoli Storage Manager forVMWare,

IBM Tivoli Archive Manager

Answer: A

QUESTION NO: 17

Which products are needed on a remote server in order to back up client data in a virtual

environment that contains Exchange, MySQL, and QuickBooks?

A. IBM Tivoli Storage Manager Backup-Archive Client, IBM Tivoli Storage Manager for Mail Client

B. IBM Tivoli Storage Manager, IBM Tivoli Storage Manager for Mail Client, IBM Tivoli Storage

Manager for Databases

C. IBM Tivoli Storage Manager Backup-Archive Client, IBM Tivoli Storage Manager for VCB, IBM

Tivoli Storage Manager for Mail

D. IBM Tivoli Storage Manager Backup-Archive Client, IBM Tivoli Storage Manager for Mail Client,

IBM Tivoli Storage Manager forVMWare

Answer: A

QUESTION NO: 18

A customer has several remote locations with physical servers that contain Microsoft Outlook e-

mail, IBM DB2 databases, and CRM applications which are backed up nightly with IBM Tivoli

Storage Manager Backup-Archive Client. Which product(s) can be used to restore these physical

servers to virtual servers in a disaster?

A. IBM Tivoli Storage ManagerFastBack

B. IBM Tivoli Storage Manager Backup-Archive Client

C. IBM Tivoli Storage Manager Client, IBM Tivoli Storage Manager for MailD. IBM Tivoli Storage Manager Fastback for Mail, IBM Tivoli Storage Manager for Databases, IBM

Tivoli Storage ManagerFastBack for Virtual Servers

Answer: B

QUESTION NO: 19

Which method can recover an AIX operating system following a catastrophic disk loss?

A. recovery API




7/69

B. recovery DVD

C. fullsystem restore using IBM Tivoli Storage Manager Restore API

D. bare machine recovery using IBM Tivoli Storage Manager for System Backup and Recovery

Answer: D

QUESTION NO: 20

Which function of FastBack could assist in the event of a client disk failure?

A. FastBack Image Store

B. Disk Regenerator Utility

C. Bare Machine Recovery

D. FastBack Recovery Manager

Answer: C

QUESTION NO: 21

A customer has a mixed environment of Windows 2003 and 2008 servers. Which methodology

ensures these machines are recoverable using a bare machine recovery procedure?

A. WSR

B. ASR

C. LVSA

D. Mksysb

Answer: B

QUESTION NO: 22

A new tape library with LTO5 drives has been specified to achieve faster data transfer. How are

the tape library and drives attached and configured?

A. attach the drives into the current library environment

B. define a new library with device class for the new drives

C. define a library changer and drive management classes

D. create a library setup and use the virtual library for the library management

Answer: B




8/69

QUESTION NO: 23

A new disk subsystem will be installed and integrated into the current IBM Tivoli Storage Manager

environment to achieve Service Level Agreement requirements. Which type of storage pool allows

multiple, concurrent processes to read and write to it simultaneously?

A. a pool withdevclass=fileB. a pool withdevclass=tape

C. a pool withdevclass=dedup

D. a pool withdevclass=random

Answer: D

QUESTION NO: 24

The Service Level Agreement was recently enhanced to allow faster restore for critical systems.

There is also a new LTO5 tape drive to be installed and a new disk subsystem already installed

and to be used for the IBM Tivoli Storage Manager V6.2 environment. Which two solutions will

achieve the fastest restore for these critical systems? (Choose two.)

A. define an active data pool on tape

B. define a copy pool on file device class

C. define a copy pool with datadeduplication

D. define an active data pool on tape with datadeduplication

E. define an active data pool on disk for the critical client systems

Answer: A,E

QUESTION NO: 25

Which three database benefits apply to the IBM DB2 database included in IBM Tivoli StorageManager V6.2? (Choose three.)

A. larger database capacity

B. automatic database audits

C. automatic database mirroring

D. automatic database reorganization

E. automatic definition fordbbackup trigger

F. eliminates the need for database incremental backups

Answer: A,B,D




9/69

QUESTION NO: 26

A company with a very busy LAN needs to conserve storage pool space by limiting the amount of

data stored. Which feature helps the company reduce network traffic during backups?

A. simultaneous write during backups

B. simultaneouswrite during migrationC. server-side datadeduplication with cache enabled

D. client-side datadeduplication with cache enabled

Answer: D

QUESTION NO: 27

A company with a large number of clients frequently runs out of available tape drives duringstorage pool backups. How can they reduce the number of mount points used?

A. simultaneous storage pool backups

B. simultaneouswrite during migration

C. simultaneous storage pool expiration

D. simultaneouswrite during reclamation

Answer: B

QUESTION NO: 28

How is connectivity verified between an IBM Tivoli Storage Manager V6.2 (TSM) server and TSM

client?

A. query the server from the TSM client

B. attempt a test installation of a Backup-Archive Client

C. run the system check command from the Install wizard

D. perform the network verification process in theAdmin Center

Answer: A

QUESTION NO: 29

A TS3500 library has been provided for use with IBM Tivoli Storage Manager V6.2 (TSM) for AIX.

Which action must be performed before the library and drives can be defined by TSM?

A. installAtape device drivers, then run cfgmgr




10/69

B. installtapeutil device drivers, then run cfgmgr

C. installAtape device drivers, then run define dev for the library and each tape drive

D. installtapeutil device drivers, then run define dev for the library and each tape drive

Answer: A

QUESTION NO: 30

After physically verifying that all server, disk, tape, and communication hardware are installed and

operating with all internal interfaces, how is each component verified to be seen by the server

operating system as functioning properly prior to installing IBM Tivoli Storage Manager V6.2

(TSM)?

A. Ensure the GUI interface is running.

B. Run the CHECKIT command in the TSM Installation Wizard.

C. Utilize the Operating System Configuration Manager or Device Manager.

D. Run the administrative command line from the server to ensure all devices are working.

Answer: C

QUESTION NO: 31

A customer requires that IBM Tivoli Storage Manager V6.2 (TSM) is installed in their environment.

Which configuration of server disks is optimal for this installation?

A. one disk for the operating system and all TSM related logs and disk pools

B. one disk for the operating system, one disk for dbdir, activelog, archivelog, and diskpool

C. separate disks for OS,dbdir, activelog and archivelog dirs, and a number of disks for diskpool

on separate controllers

D. one partition for dbdir, one partition for activelog and archivelog, one partition for diskpool, and

one partition for the OS

Answer: C

QUESTION NO: 32

A server with Windows 2003 64 bit has been specified for use with IBM Tivoli Storage Manager

V6.2 (TSM) and it has been supplied with 4 GB RAM, two quad core CPUs, two 500GB SATA

hard disks, and a 1 Gbit NIC. What is required for a supported configuration?

A. additional CPU




11/69

B. additional NICs

C. additional memory

D. additional disk space

Answer: C

QUESTION NO: 33

A server has been specified for use with IBM Tivoli Storage Manager (TSM) V6.2 and is part of a

standard specification from a supplier and must meet all the requirements for TSM V6.2. What

should be part of this specification?

A. more than 3 GB RAM

B. more than three hard disk drives

C. more than two network interface cards

D. more than four host bus adapters (Fibre Channel)

Answer: A

QUESTION NO: 34

Which Linux operating system is no longer supported on an IBM Tivoli Storage Manager V6.2server?

A. Linux x86

B. Linux x86_64

C. LinuxzSeries

D. Linux on POWER

Answer: A

QUESTION NO: 35

The currently installed IBM Tivoli Storage Manager server needs to be upgraded using the

network method. Which process starts the migration via the network?

A. dsmicfg

B. dsmupgdx

C. dsmupgrdD. dsmicfgx




12/69

Answer: B

QUESTION NO: 36

The dsmicfgx utility was used to install and configure a new IBM Tivoli Storage Manager (TSM)

server instance. During the installation process a problem occurred. The configuration process

must be restarted. Which command removes the created TSM database?

A. db2 drop TSMDB1

B. db2 list db directory

C. dsmserv removedb TSMDB1

D. dsmserv db remove TSMDB1

Answer: C

QUESTION NO: 37

At a minimum, what must be done before upgrading IBM Tivoli Storage Manager (TSM)?

Check for hardware requirements.

Check for the newest TSM fixes.

Perform a backup of the TSM environment including the database.

Update the BIOS of the TSM server.

A. 1, 2, 3

B. 2, 3, 4

C. 1, 3, 4

D. 1, 2, 4

Answer: A

QUESTION NO: 38

What is the function of the DSMUPGRD upgrade utility for IBM Tivoli Storage Manager V6.2

(TSM)?

A. It is run after a new version of TSM is installed.

B. It checks all prerequisites (disk space, memory, software level).

C. It starts the TSM upgrade after a successful check of prerequisites.

D. It prepares and extracts data from the database which will be migrated.

Answer: D




13/69

QUESTION NO: 39

When is a new system required to perform an upgrade from IBM Tivoli Storage Manager (TSM)

V5.x to V6.2?

A. if IBM DB2 is not already installed

B. if the existing TSM server is at V5.5

C. if the existing IBM DB2 installation has to be extended

D. if the existing server is on one of the platforms that are not supported for the new TSM server

Answer: D

QUESTION NO: 40

After installing the IBM Tivoli Storage Manager V6.2 (TSM) Backup-Archive client, which three

rules should be taken into consideration when building the include-exclude list? (Choose three.)

A. If it is not excluded, it is included.

B. If it is not included, it is excluded.

C. The include-exclude list is read from the top down.

D. The entire list is processed for each backup object.E. The include-exclude list is read from the bottom up.

F. When a match for the backup object occurs, TSM stops processing thelist.

Answer: A,E,F

QUESTION NO: 41

In order for the IBM Tivoli Storage Manager V6.2 Backup-Archive client to connect to the serverusing TCP/IP, which three options are valid in the Backup-Archive client options file? (Choose

three.)

A. TCPPORT

B. COMMMETHOD

C. SERVERNAME

D. SERVERPORT

E. COMMPROTOCOL

F. TCPSERVERADDRESS

Answer: A,B,F




14/69

QUESTION NO: 42

What are three ways to define client options in IBM Tivoli Storage Manager V6.2 (TSM)? (Choose

three.)

A. edit the dsmserv.opt file

B. edit the dsm.opt or dsm.sys files

C. define option sets on the TSM server

D. define option sets on the Backup-Archive client

E. use the Preference Editor in the Backup-Archive GUI

F. use the Client Preference Editor in the IBM Tivoli Integrated Portal

Answer: B,C,E

QUESTION NO: 43

The IBM Tivoli Storage Manager V6.2 (TSM) backup administrator asks if there is a way to speed

up the daily backup because the defined backup window is too short. The system to be protected

is AIX V6.1. How can this be achieved?

A. use the AIX JFS2 file systemB. set up a journal-based backup

C. increase the scheduled backup window

D. set the optionskipjournal in the client option file

Answer: B

QUESTION NO: 44

How is the Backup-Archive client set up with remote access in IBM Tivoli Storage Manager V6.2

(TSM)?

A. use the TSM VNC client

B. configure the remote node on each client system

C. setup and customize the TSM Web client on each Backup-Archive client system

D. setup and customize the TSM remote access client on each Backup-Archive client system

Answer: C




15/69

QUESTION NO: 45

In a newly installed IBM Tivoli Storage Manager V6.2 (TSM) environment, how can a business

consultant set up a daily backup to support the customer?

A. install the TSM Backup-Archive client cron agent

B. set theschedmode in the dsm.opt file to dailyC. run the daily backup manually and immediatelycheck the results

D. install the TSM Backup-Archive client, customize the scheduler service, and manage the

scheduler service by the Web client (dsmcad)

Answer: D

QUESTION NO: 46

What is the name of the new component in IBM Tivoli Storage Manager V6.2 which replaced the

Integrated Solutions Console?

A. IBM Tivoli Solution Center

B. IBM Tivoli Integrated Portal

C. IBM Tivoli Management Portal

D. IBM Tivoli Storage Manager Administration Center

Answer: B

QUESTION NO: 47

Which statement is true regarding an IBM Tivoli Storage Manager V6.2 Administration Center

installation?

A. The IBM Tivoli Integrated Portal is now replaced by the Integrated Solutions Console.

B. The IBM Tivoli Integrated Portal server is automatically started after a successful installation.

C. The IBM Tivoli Integrated Portal server will automatically stop after 60 minutes for security

reasons.

D. The IBM Tivoli Integrated Portal server must be configured with the TIP_setup.exe after a

successful installation.

Answer: B

QUESTION NO: 48




16/69

Which feature is new in the Administration Center for IBM Tivoli Storage Manager (TSM) V6.2?

A. automatic deployment of Windows client updates

B. creation of client node backup sets with a table of contents

C. backup of the TSM server from within the server properties page

D. creation of additional AIX Tivoli Storage Managerserver instances

Answer: A

QUESTION NO: 49

What are three components of the IBM Tivoli Storage Manager V6.2 reporting and monitoring

feature? (Choose three.)

A. Tivoli Storage AgentB. Tivoli Data Warehouse

C. TivoliEnterprise Portal

D. Tivoli Workload Scheduler

E. Tivoli Enterprise Console

F. TivoliEnterprise Monitoring Server

Answer: B,C,F

QUESTION NO: 50

Which software component must be used so that IBM Tivoli Storage Manager V6.2 customized

reports can be created?

A. Warehouse Proxy agent

B. Summarization Pruning agent

C. Business Intelligence and Reporting Tools (BIRT)D. Tivoli Storage Manager Reporting and Monitoring agent

Answer: C

QUESTION NO: 51

What is used to view historical reports?

A. Administration Center

B. TivoliEnterprise Portal




17/69

C. Administrative Command Line

D. Microsoft Management Console

Answer: A

QUESTION NO: 52

When installing IBM Tivoli Storage Manager client in a Microsoft Cluster server or Veritas Cluster

server environment cluster, which option must be configured before starting the cluster?

A. clusternode

B. quorumdrive

C. clustername

D. quorumsystem

Answer: A

QUESTION NO: 53

Where must the IBM Tivoli Storage Manager V6.2 (TSM) Backup-Archive client Scheduler Service

be installed in a clustered environment?

A. It is installed and configured for each cluster node.

B. It is installed and configured only on the TSM Server.

C. It is installed and configured on both the physical and quorum drives.

D. It is installed and configured only on the active cluster being used during the backup schedule.

Answer: A

QUESTION NO: 54

How does IBM Tivoli Storage Manager V6.2 (TSM) server identify the node that can be backed up

in a clustered environment?

A. TSM client communicates only with the active cluster which is registered with the TSM server.

B. TSM client uses the Cluster Manager to send data to the TSM server using the TSM Backup-

Archive client.

C. TSM client has a unique node name that is registered for each physical and virtual node in a

clustered environment.D. TSM client is installed on the quorum drive and the Cluster Management tool identifies which

node will be backed up.




18/69

Answer: C

QUESTION NO: 55

The IBM Tivoli Storage Manager server started successfully but the active log directory is not

holding all the transactions. The logs must be upgraded to 64 GB. Which parameter must be

updated on the dsmserv.opt file?

A. LOGSize 65536

B. ACTIVELOGSize 65536

C. BUFFSizeactive 65536

D. ARCHIVELOGSize 65536

Answer: B

QUESTION NO: 56

During the IBM Tivoli Storage Manager (TSM) server startup, the ANR0902W messages regarding

HTTPPort 1580 appears.

How is the ANR0902W message resolved?

A. edit the dsmserv.opt file, change theHTTPPort to noneB. edit the dsmserv.opt file, remove the HTTPPort 1580 entry

C. issue delete HTTPPort 1580 from the TSM server prompt

D. issue setserveropt HTTPPort none from the TSM server prompt

Answer: B

QUESTION NO: 57

The server is started and is ready for use, however, the COMMTimeout value needs to be

adjusted. What is the best way to immediately update the COMMTimeout value?

A. setCOMMTimeout 120

B. setopt COMMTimeout 120

C. set serverCOMMTimeout 120

D. edit the server option file value COMMTimeout 120

Answer: B




19/69

QUESTION NO: 58

Before installing the IBM Tivoli Storage Manager (TSM) server on an AIX system, an administrator

must check hardware and software configurations to ensure the current system meets TSM server

requirements. Which two elements are essential on the administrator checklist? (Choose two.)

A. browser revision levelB. operating system level

C. general parallel file system is available

D. graphic interface is installed and working properly

E. communication protocols are installed and configured

Answer: B,E

QUESTION NO: 59

The communications between the IBM Tivoli Storage Manager (TSM) server and the Backup-

Archive client, administrative command line client (dsmadmc), and client application program

interface are always password protected. How can a TSM V6.2 administrator add another level of

data protection?

A. create a client trust file

B. usepasswordaccess generate

C. use Secure Socket Layer (SSL)

D. specify a standard communications port

Answer: C

QUESTION NO: 60

What are two IBM Tivoli Storage Manager server options for Secure Socket Layer (SSL)communications? (Choose two.)

A. TCPIP

B. V6TCPIP

C. SSLTCPPORT

D. SSLTCPADMINPORT

E. SSLADMINCLIENTPORT

Answer: C,D




20/69

QUESTION NO: 61

An IBM Tivoli Storage Manager (TSM) V6.2 Windows server was installed using the dsmicfgx

procedure.

During the first backup for the TSM database an IBM DB2 error message appears:

DB2 sqlcode: -2033. DB2 sqlerrmc: 137

The error looks to be on the IBM DB2 side. Which command can be used verify TSM configuration

parameters?

A. db2set

B. db2 verify

C. db2 getdbm cfg

D. dsmadmc "get db config"

Answer: C

QUESTION NO: 62

Which command can only be used with the manual installation for the Windows TSM server?

A. db2start

B. db2 updatedbm cfg using dftdbpath f:

C. db2icrt -a SERVER -u tsminst1tsminst1

D. db2 updatedbm cfg using dftdbpath /home/tsminst1

Answer: B

QUESTION NO: 63

The newly installed IBM Tivoli Storage Manager (TSM) server on AIX has been started with user

tsminst1 in the group tsmsrvrs.

This message appears on the activity log:

ANR9999D_2382920815 PvrFioOpen .... open error on file.

ANR8501E System return code 5 received opening volume ....

ANR1404W Scratch volume mount request denied - mount failed

There is a problem within the file system. Which command corrects the problem?

A. db2 list db directory




21/69

B. chfs -a size=240000 /tsmstg

C. chown -R root,system /tsmstg/*

D. chown -R tsminst1,tsmsrvrs /tsmstg/*

Answer: D

QUESTION NO: 64

The administrator should regularly back up the IBM Tivoli Storage Manager (TSM) database and

ensure that the correct interface settings are added into the IBM DB2 environment. Which settings

are unique for a Windows TSM server?

A. DSMI_CONFIG=c:\tsm\server1\tsmdbmgr.opt

B. DSMI_CONFIG=/home/tsminst1/tsminst1/tsmdbmgr.opt

C. db2set -i server1 DB2_VENDOR_INI=c:\tsm\server1\tsmdbmgr.env

D. dsmsutil.exe UPDATEPW /NODE:$$_TSMDBMGR_$$ /PASSWORD:TSMDBMGR

/VALIDATE:NO /OPTFILE: "c:\tsm\server1\tsmdbmgr.opt"

Answer: C

QUESTION NO: 65

When planning an IBM Tivoli Storage Manager server environment, the space needed for active

log and archive logs must be adjusted to ensure a smooth operation. What is the recommended

minimum archive log space?

A. same size as the active log space

B. twice the size of the active log space

C. three times the size of the active log space

D. four times the size of the archive log space

Answer: C

QUESTION NO: 66

The IBM Tivoli Storage Manager V6.2 (TSM) database is installed and used on a separate file

system on AIX or Linux. For the best performance additional space must be added to the

database. The new file system /tsminst1/dbdir was created for this reason. Which command adds

additional space for the TSM database?

A. db2 list db




22/69

B. extenddbspace /tsminst1/dbdir

C. db2 updatedbm cfg using dftdbpath d:

D. db2 updatedbm cfg using dftdbpath /tsminst1/dbdir

Answer: B

QUESTION NO: 67

A company has set up a newly installed Windows 2008 SP2 server. The business policy specifies

that only certified devices and drivers can be used in a production system. The installed tape

library is from a non-IBM vendor with LTO-4 drives. How can the requirement for using certified

devices be fulfilled?

A. use the certified IBM device driver

B. use the certified TSM device driver

C. use the vendor certified Windowspassthru device driver

D. ignore the certification check when installing the TSM device driver

Answer: C

QUESTION NO: 68

A company has a newly installed IBM Tivoli Storage Manager server on Windows 2008 SP2.

Which step(s) verify the usage of device drivers if the business policy specifies using certified

devices and drivers?

Find the driver for the device from Microsoft and then load the native driver for the device

If a native driver is not available from Microsoft, visit the the hardware vendor website and

download the native driver. Then load the native driver for the device from this download.

If the native driver is not available from the vendor then use the IBM Tivoli Storage Manager

(TSM) driver.

For non-IBM devices only TSM device drivers can be used.

A. Only 1

B. 1, 2, 3

C. Only 3

D. Only 4

Answer: B




23/69

QUESTION NO: 69

A company plans to upgrade the IBM Tivoli Storage Manager (TSM) server from V6.1 to V6.2. The

existing IBM TS3500 tape library will continue to be used. What must be done with the device

drivers in a Windows 2008 environment?

A. Use native Windows device drivers.B. The existing tape library must be partitioned.

C. The existing device driver can be used with the new TSM server software.

D. The device driver must be changed to the latest level of the TSM device driver.

Answer: C

QUESTION NO: 70

When using server and client side data deduplication, which configuration tasks must be

performed?

Upgrade the server and client to V6.1.

The client must have the client side deduplication option enabled.

Set deduprequiresbackup to yes

The target storage pool must be a deduplication enabled storage pool.

A. 1, 2

B. 1, 3

C. 2, 3

D. 2, 4

Answer: D

QUESTION NO: 71

How are large amounts of data from many servers backed up and recovered if the majority of the

files are over 1 GB, the backup window is four hours and the customer has a tape library with two

drives?

A. back up directly to a tape pool

B. back up to a file storage pool and migrate later to tape

C. backup two servers directly to tape and all others to disk storage pool

D. back up to a disk storage pool with amaxsize set to 1 GB and migrate to tape later

Answer: B




24/69

QUESTION NO: 72

Which two statements are appropriate practices for storage pool backup for IBM Tivoli Storage

Manager V6.2 (TSM)? (Choose two.)

A. Migrate data to all copy pools.

B. Enable caching on all storage pools.

C. Back up the TSM database and then back up the storage pools.

D. Back up each primary storage pool to the same copy pool every time.

E. Setreusedelay in the copy storage pool to match the drmdbbackupexpiredays.

Answer: D,E

QUESTION NO: 73

Which IBM Tivoli Storage Manager (TSM) servers support server side data deduplication?

A. TSM V6.2 servers only

B. TSM V6.1 or later servers

C. TSM V5.4 or later servers

D. TSM V5.5 or later servers

Answer: B

QUESTION NO: 74

Which type of data can be deduplicated?

A. all types of data

B. data on tape storage pool

C. data on random access disk

D. data on storage pools that are associated with file device class

Answer: D

QUESTION NO: 75

Which command turns off data deduplication?




25/69

A. UPDATE STGPOOL command and specify DEDUPLICATE=NO

B. UPDATE STGPOOL command and specify DEDUPLICATE=OFF

C. UPDATE STGPOOL command and specify DEDUPLICATE=MANUAL

D. UPDATE STGPOOL command and specify DEDUPLICATE=DISABLED

Answer: A

QUESTION NO: 76

What are two advantages to using client side deduplicaton? (Choose two.)

A. It reduces the amount of data to go over the network.

B. Client side datadeduplication offers more protection against data loss.

C. During storage pool backup to non-deduplicated storage pools, client extents are reassembled

into contiguous files.

D. The processing power that is required to remove duplicate data on the server is eliminated

allowing space savings on the server to occur immediately.

E. When client side datadeduplication is enabled and the server has run out of storage in the

destination pool, but there is a next pool defined, the client will continue the transaction without

stopping the process.

Answer: A,D

QUESTION NO: 77

Client data is being encrypted, compressed, and transmitted LAN-free to the IBM Tivoli Storage

Manager (TSM) server. Data deduplication is set to yes and the TSM server has deduplication

enabled storage pools. Which method for deduplication can be used?

A. client sidededuplication

B. server sidededuplicationC. neitherdeduplication methods are used

D. both client side and server sidededuplication

Answer: C

QUESTION NO: 78

How can a system administrator improve the data transfer rate during a deduplication process?

A. use stub file backup transaction




26/69

B. use client sidededuplication cache

C. set the server transaction byte limit

D. create larger datadeduplication storage pools

Answer: B

QUESTION NO: 79

An IBM Tivoli Storage Manager (TSM) server has an existing policy domain, STANDARD, and

policy set, STANDARD. The administrator has been informed that a new management class is

required. This management class should be called SALES_CLASS. Which command would

achieve this goal?

A. createmgmtclass STANDARD STANDARD SALES_CLASS

B. definemgmtclass STANDARD STANDARD SALES_CLASS

C. update mgmtclass SALES_CLASS STANDARD STANDARD

D. mgmtclass update STANDARD STANDARD add SALES_CLASS

Answer: B

QUESTION NO: 80

An IBM Tivoli Storage Manager (TSM) server has an existing policy domain, STANDARD and

policy set, STANDARD. Which command creates a new management class called MGMT_CLASS

in the policy domain POL_DOM_1?

A. update mgmtclass STANDARD STANDARD MGMT_CLASS

B. definemgmtclass STANDARD STANDARD MGMT_CLASS

C. definemgmtclass POL_DOM_1 STANDARD MGMT_CLASS

D. update mgmtclass POL_DOM_1 STANDARD SALES_CLASS

Answer: C

QUESTION NO: 81

Which three IBM Tivoli Storage Manager (TSM) definitions must be in place in order to create

backup and archive copy groups? (Choose three.)

A. Policy SetB. Policy Domain

C. Management Class




27/69

D. Copy Group Policy

E. Disk Management Policy

F. Tape Management Policy

Answer: A,B,C

QUESTION NO: 82

A company is setting up server-to-server communication between the IBM Tivoli Storage Manager

(TSM) servers. Which three steps are part of the setup on a remote server? (Choose three.)

A. setserverport

B. setremotehost

C. setcommmethod

D. setserverlladdress

E. setserverpassword

F. setserverhladdress

Answer: D,E,F

QUESTION NO: 83

A company is setting up server-to-server communication between the IBM Tivoli Storage Manager

(TSM) servers. Which three steps are part of the setup on the local server? (Choose three.)

A. setlocalhost

B. setserverport

C. setservername

D. setcommethod

E. setserverlladdress

F. setserverhladdress

Answer: C,E,F

QUESTION NO: 84

What must all the servers have set up in order to set up communications for command routing?

A. SHAREDCOMMB. server definitions

C. server options=shared




28/69

D. SHAREDMEM communication

Answer: B

QUESTION NO: 85

To bring new labeled tape cartridges into the IBM Tivoli Storage Manager Library requires

configuration. The bulk slot has the capacity of 10 cartridges but 20 additional cartridges have

been received. Which command brings in the tape cartridges?

A. CHECKIn LIBVolume TSMLIB1 SEARCH=Yes STATus=SCRatch CHECKLabel=Barcode

B. LABEl LIBVolume TSMLIB1 SEARCH=No STATus=SCRatch LABELSource=Vollist

OVERWRITE=Yes

C. LABEl LIBVolume TSMLIB1 SEARCH=Yes STATus=SCRatch CHECKLabel=Barcode

OVERWRITE=Yes

D. LABEl LIBVolume TSMLIB1 SEARCH=Yes CHECKIN=SCRatch LABELSource=Barcode

OVERWRITE=Yes

Answer: A

QUESTION NO: 86

A tape cartridge was inserted into the library to be used as a scratch tape. Which command will

make volume BA0001 a scratch volume?

A. CHECKIn LIBVolume TSMLIB1 BA0001 SEARCH=No CHECKLabel=Barcode

STATus=SCRatch

B. CHECKIn LIBVolume TSMLIB1 BA0001 SEARCH=No CHECKLabel=Barcode

STATus=PRIvate

C. CHECKIn LIBVolume TSMLIB1 SEARCH=Bulk VOLList=BA0001 CHECKLabel=Yes

STATus=SCRatchD. CHECKIn LIBVolume TSMLIB1 SEARCH=Yes VOLRange=BA0001 CHECKLabel=Barcode

STATus=PRIvate

Answer: A

QUESTION NO: 87

A defective tape cartridge with a damaged barcode must be removed. Which command will

remove volume BA0002 from the library inventory?




29/69

A. CHECKOut LIBVolume TSMLIB1 BA0002 REMove=Bulk CHECKLabel=No FORCE=Yes

B. CHECKOut LIBVolume TSMLIB1 BA0002 REMove=Bulk CHECKLabel=Yes FORCE=Yes

C. CHECKOut LIBVolume TSMLIB1 VOLRange=BA0002 REMove=No CHECKLabel=No

FORCE=No

D. CHECKOut LIBVolume TSMLIB1 VOLRange=BA0002 REMove=No CHECKLabel=Yes

FORCE=Yes

Answer: B

QUESTION NO: 88

How is a node registered?

A. From the client server console, enter the command REG NODE.

B. From the server console, issue the command Register Client.

C. From the admin command line, issue the command REG NODEclientname clientpassword.

D. From theAdministrative Center, go to New Node Portal, select Add New Client, and enter the

node name.

Answer: C

QUESTION NO: 89

Using the administrative command line, which command adds a new client?

A. ADD NODEnodename nodepassword

B. ADD CLIENTnodename nodepassword

C. REG NODEclientname clientpassword

D. REG ADMINclientname clientpassword

Answer: C

QUESTION NO: 90

A customer is manually installing and configuring the Backup-Archive client. What must be done

for the client machine to access the IBM Tivoli Storage Manager (TSM) server?

A. Register the node and set the user ID and password.

B. The node must be connected before the client is installed.C. The IP address of the node must be defined on the TSM server.

D. Pre-registration of the user's ID and password must be completed prior to client install.




30/69

Answer: A

QUESTION NO: 91

A new IBM Tivoli Storage Manager administrator is responsible for managing storage pools,

databases, and recovery logs but will not have system privileges. Which administrative class has

the new administrator been given?

A. Policy

B. Storage

C. Manager

D. Administrator

Answer: B

QUESTION NO: 92

An IBM Tivoli Storage Manager (TSM) administrator has changed positions within a company and

is no longer responsible for TSM functions. Which command is used to prevent the administrator

from administering TSM?

A. REVOKE PRIVILEGEB. REMOVE PRIVILEGE

C. REVOKE AUTHORITY

D. REMOVE AUTHORITY

Answer: C

QUESTION NO: 93

A junior administrator with operator privileges has been promoted. The promotion includes the

addition of unrestricted storage privileges and restricted policy management for the services

domain. Which command adds these additional privileges?

A. GRANT AUTHORITY CLASS=STORAGE DOMAINS=SERVICES

B. EXTEND AUTHORITY CLASS=STORAGE DOMAINS=SERVICES

C. GRANT AUTHORITY CLASS=POLICY -SERVICES, CLASS=STORAGE

D. EXTEND AUTHORITY CLASS=POLICY -SERVICES, CLASS=STORAGE

Answer: A




31/69

QUESTION NO: 94

In a large company, data archived for node A should be retrieved on node B. Data backed up on

node B should be restored on node A. What is the most specific way to do this?

A. Use the server command grant accesssource_node target_node.

B. Use -virtualnode option on node A to retrieve the archive data and on node B to restore thebackup data.

C. Ask the administrator of node A to retrieve the data and then restore the backup data from node

B with the -fromnode option.

D. Allow access for backup data on node B and for archive data on node A. Then retrieve the data

on node B with the -fromnode option and restore the data on node A with the -fromnode option.

Answer: D

QUESTION NO: 95

The owner of node A data, which was backed up daily with the IBM Tivoli Storage Manager (TSM)

scheduler, allows the TSM administrator to restore a specific file on another system. What are two

ways to do this? (Choose two.)

A. Open the Backup-Archive client GUI with the -virtualnode option, choose restore, and select the

file to be restored.

B. Open the Backup-Archive client command line interface and allow access to a specific file with

the set access command.

C. The owner of node A tells the TSM administrator the password of the node so that the web

client can be used to restore the specific file.

D. Open the Backup-Archive client GUI with the node name of the restoring node, select Utilities,

access another node, and pick the file to be restored.

E. Open the Backup-Archive client GUI and select Utilities, Node Access List, and grant

permission to the specific file and the node from where the data will be restored.

Answer: B,E

QUESTION NO: 96

How can daily archived data on node A be deployed to several file servers automatically?

A. Use the newly established Client Deployment option.

B. Use the IBM Tivoli Storage Manager Client Auto Data Duplication function.

C. Archive the data daily with a schedule and retrieve the data on each server with a schedule

using the -virtualnode option.




32/69

D. Archive the data daily with a schedule, set access for this file to the specific file servers, and

schedule a restore command with the -fromnode option.

Answer: D

QUESTION NO: 97

Which file contains the include and exclude statements for an IBM Tivoli Storage Manager V6.2

client backup?

A. dsm.opt

B. backup.ini

C. backup.tsm

D. dsmserv.opt

Answer: A

QUESTION NO: 98

The contents of the IBM Tivoli Storage Manager V6.2 options file is:

include

A. C:\abc\test.avi

B. C:\abc\test.zip

C. C:\abc\def\test1.avi

D. C:\abc\def\test1.zip

Answer: C

QUESTION NO: 99

Which log file contains the errors and files excluded from backup?

A. dsm.opt

B. tsmba.log

C. baclient.log

D. dsmerror.log

Answer: D




33/69

QUESTION NO: 100

What does a point-in-time restore do?

A. It displays a list of backups to restore.

B. It resets the client options file to a specific date and time.

C. It sets a restore command to be executed at a specific date and time.D. It restores files to a past state that existed at a specific date and time.

Answer: D

QUESTION NO: 101

Which command restores all valid system objects?

A. restore sysobj

B. restore system

C. restore sysobject

D. restore systemobject

Answer: D

QUESTION NO: 102

Which command restores a backup of system state?

A. restore syssta

B. restore system

C. restore sysstate

D. restore systemstate

Answer: D

QUESTION NO: 103

Which file contains the include and exclude statements for the IBM Tivoli Storage Manager V6.2

archive?

A. dsm.opt

B. backup.ini

C. backup.tsm

D. dsmserv.opt




34/69

Answer: A

QUESTION NO: 104

Which file contains the errors from a Backup-Archive client archive operation?

A. dsm.opt

B. archive.log

C. dsmerror.log

D. archiveerror.log

Answer: C

QUESTION NO: 105

Which component is needed to run a scheduled archive?

A. Client Polling

B. Server Schedule

C. Client Scheduler Service

D. Client Prompted Schedule

Answer: C

QUESTION NO: 106

IBM Tivoli Storage Manager V6.2 is protecting valuable customer data. What can be done in order

to ensure this data is protected to the customer's satisfaction?

A. run querydrm nodename

B. run query datanodename

C. pick a random client and restore some or all of the data

D. restore data for a node with a large amount of expired data

Answer: C

QUESTION NO: 107

How can an IBM Tivoli Storage Manager V6.2 (TSM) administrator be sure that data backed up in

the past still exists in the TSM environment without using complex SQL SELECT statements?




35/69

A. Perform a full restore of all data.

B. Perform a restore using the -all option

C. Perform a restore using the -pick option.

D. Ask the SQL administrator which data has been backed up.

Answer: C

QUESTION NO: 108

An IBM Tivoli Storage Manager V6.2 (TSM) administrator must check that data backed up 30 days

ago still exists on the TSM server. The Backup Copy Group for this node has RETEXTRA set to

60 days and VEREXISTS set to 60. Why might the data from 30 days ago not be restorable?

A. The RETVER is set too high.

B. The RETEXTRA is set too high.

C. The VEREXISTS is set too high.

D. Clients are taking multiple backups per day.

Answer: D

QUESTION NO: 109

For further automation, an administrator uses their own IBM Tivoli Storage Manager V6.2

maintenance script. The script is created on the TIP/Admin Center. What is the correct sequence

of steps to create this maintenance script?

A. Server Maintenance > Maintenance Script > Select Action > Modify Maintenance Script

B. Server Maintenance > Maintenance Script > Select Action > Create Custom Maintenance Script

C. Server Maintenance > Maintenance Script > Select Action > Copy to Custom Maintenance

Script

D. Server Maintenance > Maintenance Script > Select Action > Convert to Custom MaintenanceScript

Answer: D

QUESTION NO: 110

All the storage pools in an environment must be backed up. Which checks would be built into the

server script to get the best and most optimized time slot to start the backup?

A. Wait until all sessions terminate and then run the backup storage pool.




36/69

B. Check the storage pool backup cache parameter to ensure that it is greater than 95%.

C. Check to ensure no administration sessions exist and then run the backup storage pool.

D. Check for client sessions using SQL statements and if there are any, reschedule the admin

scheduler to backup the storage pool.

Answer: D

QUESTION NO: 111

An environment has an offsite copy storage pool. The remote copy pool will be sent on Monday to

the offsite location. These copy pool volumes need to be reclaimed as well as optimized. When

would such tasks be scheduled?

A. The reclaim must be run daily.

B. The reclaim can be run selectively.

C. The reclaim can be done before Monday.

D. There is no need to run reclaims for offsite copy pools.

Answer: C

QUESTION NO: 112

Which file stores installation information such as platform, version, architecture, and prerequisites?

A. log.txt

B. install.log

C. tsminstall.txt

D. installation.log

Answer: A

QUESTION NO: 113

Which operating systems are supported for an IBM Tivoli Storage Manager V6.2 server?

A. AIX, HPUX, Linux x86, Windows

B. AIX, Linux x86_64, NetWare, Z/OS

C. AIX, Linux x86_64, HPUX, Windows

D. HPUX, Linux x86, NetWare, Windows

Answer: C




37/69

QUESTION NO: 114

Which operating systems are supported for the IBM Tivoli Storage Manager V6.2 Backup-Archive

client?

A. AIX, HPUX, Windows, Linux

B. AIX, HPUX, NetWare, Windows

C. HPUX, NetWare, Windows, Macintosh

D. Palm OS, Windows, Macintosh, Linux

Answer: A

QUESTION NO: 115

An IBM Tivoli Storage Manager V6.2 system administrator observes that deduplication is not

happening for the storage pool DEDUPPOOL. The activity log shows that DEDUPPOOL is not

enabled for deduplication. What is the best way to enable deduplication on the DEDUPPOOL?

A. Start the identify process to startdeduplication.

B. Redefine the DEDUPPOOL with DEDUPLICATE=YES.

C. Use the command COPY ACTIVEDATA DEDUPPOOL.D. Run update DEDUPPOOL by specifying the parameter DEDUPLICATE=YES.

Answer: D

QUESTION NO: 116

The activity log of IBM Tivoli Storage Manager V6.2 (TSM) reports that the log is running out of

space and the current transaction is rolled back. The server issues an error message and halts.Which step should an administrator perform to overcome the out of log space situation?

A. start the server using the mirror copy of the log

B. format the active log and restart the TSM server

C. update dsmserv.opt with the ARCHIVELOG server option to the new maximum size (in MB) of

the active log

D. update the dsmserv.opt file with ACTIVELOGSIZE server option to the new maximum size (in

MB) of the active log

Answer: D




38/69

QUESTION NO: 117

What is the purpose of this command in IBM Tivoli Storage Manager V6.2 (TSM): query actlog

begindate=-1 begintime=10:00 endtime=12:00 msgno=2017

A. It allows the TSM clientnodeB to access the database records of serverA.

B. It displays all activity log entries from all TSM instances from yesterday at10 a.m. to 12:00 p.m.with a message ID of 2017.

C. It displays up to 2017 messages from yesterday starting at10 a.m. and ending at 12:00 p.m. so

that TSM processing can be reviewed.

D. It displays all activity log entries from yesterday starting at10 a.m. and ending at 12:00 p.m. with

the message ID containing the numbers 2017.

Answer: D

QUESTION NO: 118

How is the name and size of the IBM Tivoli Storage Manager active log displayed?

A. DSMSERV DISPLAY LOG

B. DSMSERV DisplayLogsize

C. DSMSERV DISPLAY ACTIVELOG

D. DSMSERV Display ACTIVELOGSIZE

Answer: A

QUESTION NO: 119

The IBM Tivoli Storage Manager active log was defined at the default size. How is the log located

and resized?

A. In the dsmserv.opt file, use the DB2LOGSIZE server option and the DB2LOGDIR server option.

B. In the dsmserv.opt file, use the ACTIVELOGSIZE server option and the ACTIVELOGDIR server

option.

C. Ina administrative command line, use the User ID of the database manager and issue the

activelogsize command.

D. Ina administrative command line, use the User ID of IBM DB2 database administrator and issue

the find log command.

Answer: B




39/69

QUESTION NO: 120

How can the location of the IBM Tivoli Storage Manager DB2 logs be found by an offline

command?

A. Issue the DSMSERV DISPLAY LOG command to display the size of the active log.

B. Issue the QUERY DBSPACE command to view the space for the file systems or drives.C. Issue the DSMSERV DISPLAY DBSPACE command to display the size of the database and

logs.

D. Issue the QUERY LOG command to display the total space, used space, and free space for the

active log and the locations of all the logs.

Answer: A

QUESTION NO: 121

IBM Tivoli Storage Manager V6.2 (TSM) uses an IBM DB2 database. Following an installation,

some IBM DB2 messages may be issued such as: SQL0000W. Which action interprets this

message?

A. run SQL0000W query from the TSM administrative command line

B. run help db2 SQL0000W from the IBM DB2 integrated solution console

C. run help message SQL0000W from the TSM administrative command line

D. rundb2 ? SQL0000W from an operating system command line on the TSM server

Answer: D

QUESTION NO: 122

Which two resources provide information regarding any IBM DB2 SQL error messages that may

be issued in an IBM Tivoli Storage Manager V6.2 (TSM) environment? (Choose two.)

A. IBM DB2 Help

B. IBM Support Website

C. SQL Administrator's Club

D. TDP for DB2 documentation

E. IBM DB2 client documentation

Answer: A,B

QUESTION NO: 123




40/69

Which resource is available to research any SQL error messages issued during IBM Tivoli Storage

Manager V6.2 (TSM)operations?

A. TSM query SQL

B. SQL query TSM

C. IBM Support Site

D. TSM database query

Answer: C

QUESTION NO: 124

An IBM Tivoli Storage Manager V6.2 (TSM) system is reporting errors during client backups.

These errors appear to be network disconnections but further investigation shows that TSM is

disconnecting the clients. Which calculations are required to ensure all clients can connect to the

TSM server?

A. number of disks divided by number of files

B. number of NICs divided by total number of disks

C. number of clients divided by total number of NICs

D. number of processors divided by number of clients

Answer: C

QUESTION NO: 125

Which two checks can be made to ensure that the correct specifications for IBM Tivoli Storage

Manager V6.2 (TSM) have been met? (Choose two.)

A. run the TSM Spec application andcheck for errors

B. run TSM until errors are produced or crashes occurC. run the TSMsyscheck application and check for errors

D. perform an analysis of the TSM system using benchmark tools

E. check the IBM website for OS, software, and hardware compatibility

Answer: D,E

QUESTION NO: 126

An IBM Tivoli Storage Manager V6.2 (TSM) server has been built with two network interface

cards, two processors, two dual port host bus adapters (HBA), an external disk array, and a fibre

channel attached library. During a test it is noted that each HBA is connected to both the disk




41/69

array and the library. What would be the result of this configuration?

A. tape and disk performance could be impacted

B. tape and disk read and writes will achieve parity

C. performance will be improved by sharing an HBA

D. connecting both media to each HBA allows local failover

Answer: A

QUESTION NO: 127

An IBM Tivoli Storage Manager V6.2 (TSM) server is regularly issuing an ANR9999D error during

client backups. Around the same time there is also an ANR8302E error message. How can it be

confirmed whether these errors are harmful to the TSM operations and data?

A. check the IBM website or TSM documentation to interpret these errors

B. run help ANR9999D | ANR8302E from the administrative command line

C. rundb2 ? ANR9999D and DB2 ? ANR8302E from the IBM DB2 command line

D. rundb2 ? ANR9999D and db2 ? ANR8302E from the operating system command line

Answer: A

QUESTION NO: 128

The IBM Tivoli Storage Manager V6.2 (TSM) server was started from Root user. These errors

appear and the server is not able to start:

ANR0172I rdbdb.c(1009): Error encountered performing action

InstanceStop. ANR0162W Supplemental database diagnostic

information: -1032:**No State Information Available (93)**:-1032

(**No Other Information Available (111)**).

Which command provides more information from the system?

A. db2 SQL1032

B. help ANR0162W

C. db2 ? SQL-1032

D. query ANR0162W

Answer: C




42/69

QUESTION NO: 129

The IBM Tivoli Storage Manager V6.2 (TSM) server must be backed up. The backup process is

finished in less than one minute. Which command provides additional information about the

backup process?

A. help ANR2968EB. q actbegind=-1

C. q actbegint=now-00:05

D. setdbrecovery yourTSMdbdevclass

Answer: C

QUESTION NO: 130

When a client is connecting to the server an error occurs. Which two actions identify the source of

the problem? (Choose two.)

A. Issue the ENABLE PROCESSES ALL command.

B. Issue theTEST PORT command.

C. If communication methods were changed, issue the DISABLE command for the previous

communication method.

D. If network settings were changed, make sure client and server options files were changed to

reflect the new settings.

E. If the server communication settings were changed, either update the client communication

options or revert to the previous method.

Answer: D,E

QUESTION NO: 131

If the TCP/IP communication method is configured in the server options file, but at server startup a

successful bind message is not issued, what needs to be verified?

A. The PORTBINDING option is defined in the dsm.opt file.

B. The TCPPORT setting in the server options file is correct.

C. The SERVERBIND setting in the client options file is correct.

D. The TCPHLADDRESS setting in the server options file is correct.

Answer: B




43/69

QUESTION NO: 132

A company is experiencing a problem where all but one client node can connect to the server.

What is the problem and how can it be corrected?

A. The node definition on the server changed. Issue the UPDATE CLIENT command.

B. The node is not properly licensed. Apply the client license and restart the scheduler.C. The node has been locked. Issue thecommmand QUERY NODE then UNLOCK

NODE .

D. The node has been disabled. Issue the command QUERY NODE then ENABLE

NODE .

Answer: C

QUESTION NO: 133

If there is an error created by reading or writing data from a device attached to a Windows system,

what should be checked for information?

A. errpt

B. syslog

C. event log

D. error report

Answer: C

QUESTION NO: 134

If there is an error created by reading or writing data from a device attached to an AIX system,

what should be checked for information?

A. errpt

B. syslog

C. error log

D. event log

Answer: A

QUESTION NO: 135

In order to view the storage device status, which task in the Administration Center is used?




44/69

A. Health Monitor

B. Manage Servers

C. Storage Devices

D. Enterprise Management

Answer: A

QUESTION NO: 136

Which file stores all Backup-Archive client errors?

A. tsmba.log

B. baclient.log

C. dsmerror.log

D. tsmclient.log

Answer: C

QUESTION NO: 137

Which IBM Tivoli Storage Manager V6.2 command for the Backup-Archive client displays server

information such as server name, server type, and server version?

A. query server

B. query session

C. queryservinfo

D. querysysteminfo

Answer: B

QUESTION NO: 138

How can it be verified that the backup schedule job ran successfully and backed up all expected

files?

A. check the schedule log file

B. run the command query schedule -opt=success

C. run a selective backup andsee if the files are backed up

D. run a manual incremental backup andsee if the files are backed up

Answer: A




45/69

QUESTION NO: 139

A company is backing up Windows and AIX servers and needs to optimize their limited backup

time. Which backup type will improve the incremental backup performance?

A. selective backup

B. image-based backup

C. journal-based backup

D. logical volume backup

Answer: C

QUESTION NO: 140

Which function allows a file system snapshot to be taken in a production environment running

Windows 2008 servers with a limited backup window?

A. SNAPSHOT=IMAGE

B. INCLUDE.SNAPSHOTFS

C. open file support with VSS

D. open file support with VGSA

Answer: C

QUESTION NO: 141

A company has 25 AIX servers that require logical volume image backups. They need to perform

image backups during which the volume is unmounted and remounted read-only. Which type of

image backup do they need to use?

A. Static

B. Dynamic

C. Snapshot

D. SharedStatic

Answer: A

QUESTION NO: 142




46/69

A company is using IBM Tivoli Storage Manager V6.2 to protect their applications. Which

additional software is necessary to protect a very busy and large Oracle 10 database located on

an AIX V6.1 server?

A. IBM Tivoli Data Protection Suite

B. IBM Tivoli Data Protection Oracle Storage

C. IBM Tivoli Storage Manager for Databases

D. IBM Tivoli Storage ManagerLANfree Agent for Oracle

Answer: C

QUESTION NO: 143

In a large SAP production system, the database must be protected with IBM Tivoli Storage

Manager V6.2 (TSM). Which software component will help to fulfill this requirement?

A. TSM for ERP

B. TSM for Database DB2

C. TSM for Copy Services

D. TSM Backup-Archive Client

Answer: A

QUESTION NO: 144

In a large SAP production system, the database should be protected with highest availability and

performance. How can this requirement be met?

A. Enable LAN-free backup and set up a storage agent.

B. Schedule each database to be backed up at different times.

C. Use IBM Tivoli Storage Manager for ERP and customize multiple sessions.D. Use the IBM Tivoli Storage Manager Backup-Archive Client with different option files.

Answer: C

QUESTION NO: 145

A company has 15 locations and a slow IP connection to the central department where a large

IBM Tivoli Storage Manager (TSM) server is installed. The internet connection delivers 2048 KB/sand the backup window is five hours. At each location there are 50 servers which have changed

data of 1 GB each. How can all systems be backed up within the window?




47/69

A. use TSM for SAN

B. perform an incremental backup to a central TSM server

C. install a TSM server at each location and perform a local backup

D. save all changed files at a special directory and schedule to archive these files daily to a central

TSM server

Answer: C

QUESTION NO: 146

To fulfill Service Level Agreements for disaster recovery, which IBM Tivoli Storage Manager V6.2

(TSM) feature should be used?

A. Disaster Planning Manager

B. Disaster Recovery Manager

C. Enterprise Recovery Product

D. Enterprise Disaster Management

Answer: B

QUESTION NO: 147

Which product is used when a customer has a requirement to perform an online backup of an SAP

environment?

A. IBM System Storage Archive Manager

B. IBM Tivoli Storage Manager for Storage Area Networks

C. IBM Tivoli Storage Manager Disaster Recovery Manager

D. IBM Tivoli Storage Manager forEnterprise Resource Planning

Answer: D

QUESTION NO: 148

What is the minimum amount of RAM recommended for an IBM Tivoli Storage Manager server

using deduplication on a 64 bit Windows server?

A. 4 GB

B. 8 GBC. 12 GB

D. 16 GB




48/69

Answer: D

QUESTION NO: 149

What is the minimum amount of RAM recommended to install an IBM Tivoli Storage Manager

server on a 32 bit Windows server?

A. 4 GB

B. 8 GB

C. 12 GB

D. 16 GB

Answer: B

QUESTION NO: 150

The IT design team decided to implement deduplication to assist with their storage capacity

problems and they are willing to provide a server for this purpose. Which server fulfills the

minimum requirement needed for IBM Tivoli Storage Manager V6.2 with deduplication?

A. Windows 2008 (64-bit) with 12 GB RAM and one 1Gbit NIC

B. Windows 2008 (64-bit) with 16 GB RAM and one 1Gbit NICC. Windows 2008 (32-bit) with 16 GB RAM and two 1Gbit NIC

D. Windows 2008 (32-bit) with 20 GB RAM and two 1Gbit NIC

Answer: B

QUESTION NO: 151

Which options must be set in the storage agent option file when configuring a storage agent in anIBM Tivoli Storage Manager V6.2 environment?

A. DEVCONFIG, VOLHIST, NODENAME

B. DEVCONFIG, SERVERNAME, TCPPORT

C. SERVERNAME, NODENAME, COMMTIMEOUT

D. COMMTIMEOUT, IDLETIMEOUT, TCPPORT

Answer: B

QUESTION NO: 152




49/69

Which IBM Tivoli Storage Manager V6.2 Windows utility provides information regarding

SCSI/Fibre Channel attached devices to assist in the correct configuration of a storage agent?

A. tsmdlst

B. tsmshow

C. tsmagent

D. tsmstgconfig

Answer: A

QUESTION NO: 153

When installing a storage agent on an IBM Tivoli Storage Manager (TSM) server where the server

options have been tuned, what should be done to ensure that the storage agent configuration is

correct?

A. remove COMMTIMEOUT IDLETIMEOUT

B. check for IDLETIMEOUT on the server

C. ensure the TSM client and TSM server options match

D. ensure the TSM server and storage agent options match

Answer: D

QUESTION NO: 154

Which statement is true about a network attached storage (NAS) filer backing up the data to the

tape library?

A. The NAS filer must be declared within the SAN fabric.

B. The NAS filer must have a fiber host bus adapter installed.

C. A path from the NAS filer to the tape device must be created.D. A SCSI tape drive must be cabled to the back of the NAS filer.

Answer: C

QUESTION NO: 155

Which command option will an IBM Tivoli Storage Manager administrator use to register a network

attached storage (NAS) file server as a node named NASNODE1, with a password of NASPWD1,in a policy domain named NASDOMAIN, so that the node name will be used to track the image

backups?




50/69

A. register node nasnode1 naspwd1 domain=nasdomain type=nas

B. register node nasnode1 naspwd1 domain=nasdomain type=node

C. register node nasnode1 naspwd1 domain=nasdomain type=ndmp

D. register node nasnode1 naspwd1 domain=nasdomain type=netapp

Answer: A

QUESTION NO: 156

Which option limits the network data management protocol (NDMP) port range to the IBM Tivoli

Storage Manager server?

A. NDMPPortrange Max Min IPAddress

B. NDMPPortrange Min Max IPAddress

C. NDMPPortrange port_number_high port_number_low

D. NDMPPortrange port_number_low port_number_high

Answer: D

QUESTION NO: 157

Adding the SNAPMIRROR parameter to which command enables block level full backup imagesof a NetApp file system?

A. BACKUP NODE

B. DEFINE BACKUP

C. BACKUPNetApp

D. DEFINE NAS BACKUP

Answer: A

QUESTION NO: 158

When enabling the NetApp SnapMirror to Tape function with RESTORE NODE, which statement

is true?

A. SnapMirror uses the FILELIST parameter.

B. The SnapMirror image can be restored to any file system.

C. The SnapMirror image can be restored to virtual file spaces.D. The SnapMirror relationship that was created by the file server during the operation is broken.




51/69

Answer: D

QUESTION NO: 159

What is a benefit of using the NetApp SnapMirror to Tape feature?

A. It backs upNetApp file systems with a large amount of files.

B. It uses the Web client to perform a block level copy of data for backup.

C. It uses the table of contents to identify block level copy of data for backup.

D. It performs a network data management protocol file level restore operation.

Answer: A

QUESTION NO: 160

To enable snapshot differencing processing using the SnapDiff API, which command should be

used to set up a password on the IBM Tivoli Storage Manager client, if the N series volume is

mounted with the IP address 192.168.111.190?

A. set password -type=filer 255.255.255.0 administrator

B. set TSM.PWD -type=filer 192.168.111.190 administrator

C. set password -type=filer 192.168.111.190 administratorD. update password -type=filer 192.168.111.190 administrator

Answer: C

QUESTION NO: 161

What are the two exceptions when an incremental backup is taken with the snapdiff option against

a CIFS mounted fileshare, located on an IBM N-Series filer? (Choose two.)

A. It does notexpire backup versions of files that are deleted from the filer.

B. Added include statements in the include-exclude filter will perform a selective backup of this file.

C. The exclude rule will not be taken into account when the file has not been changed between

two snapshots.

D. It does not rebind backup versions to a new management class, if the management class has

changed.

E. If the entirefilespace is deleted from the IBM Tivoli Storage Manager inventory, a new snapshot

is created on the filer to use at the source and a full incremental backup is performed.

Answer: C,E




52/69

QUESTION NO: 162

Which statement is true while performing an incremental backup using the snapdiff option on a

Windows IBM Tivoli Storage Manager client?

A. CIFS default security style must be set to NTFS.

B. If the CIFS security is set to mixed or UNIX, then only the client can perform thesnapdiff

backup.

C. Only backup file systems residing on volumes created on the filer with aqtree security style of

MIXED.

D. Only backup file systems residing on volumes created on the N series with aqtree security style

of MIXED.

Answer: A

QUESTION NO: 163

Which statement is true for the NetApp SnapLock licensed feature configured with IBM Tivoli

Storage Manager V6.2 (TSM)?

A. SnapLock feature allows TSM to set a EXPIRY date for files.B. The SnapLock feature is used to protect data with a retention period of less than three months.

C. The NetApp SnapLock licensed feature helps meet federal regulatory requirements for backup

data.

D. The SnapLock feature allows TSM to set a retention date for files and to commit a file to a

WORM (write once, read many) media.

Answer: D

QUESTION NO: 164

When protecting data using the NetApp SnapLock licensed feature, which storage pool parameter

ensures that a storage pool is managed based on a data retention period?

A. snaplock

B. RECLAMATIONTYPE

C. storage pool threshold

D. only RETVER and RETMIN of archive copy group are required

Answer: B




53/69

QUESTION NO: 165

When protecting data using the NetApp SnapLock licensed feature with IBM Tivoli Storage

Manager, a retention date is set for the FILE volume through the SnapLock interface. This date is

calculated by which parameter?

A. Reclamation Type: SNAPLOCK

B. Reclamation Type: THRESHOLD

C. RETVER and RETMIN parameters of the backup copy group

D. RETVER and RETMIN parameters of the archive copy group

Answer: D

QUESTION NO: 166

Which statement is true when Active Directory objects are queried, restored, or backing up the

system state with IBM Tivoli Storage Manager V6.2?

A. The active directory service must be stopped.

B. The active directory service must be in online state.

C. The active directory service must be in offline state.D. The active directory service can be in online state or in offline state.

Answer: B

QUESTION NO: 167

Which statement is correct when the system state is restored with IBM Tivoli Storage Manager

V6.2?

A. The Active Directory service must be online only.

B. The Active Directory service must be online (but not stopped).

C. The Active Directory service must be offline (but not stopped).

D. The Active Directory service can be online or offline (but not stopped).

Answer: C

QUESTION NO: 168




54/69

On a Windows Server 2003 or Windows Server 2008 client, which command should an IBM Tivoli

Storage Manager administrator use to restore local, deleted Active Directory objects (Tombstone

Objects)?

A. restore local

B. restore object

C. restore tombstone

D. restore adobjects

Answer: D

QUESTION NO: 169

What needs to be set up on the client in order for VMWare backups to take place?

A. In the DSM.OPT file set the backup type and then add VMWARE BACKUP options.

B. In VMWare Virtual Center or VMWare ESX Server set backup type to VCB and method to TSM.

C. In the ESX Server orVMWare Virtual Center set the backup type to VCB and the node name to

be backed up.

D. In the DSM.OPT file set the VM backup type, domain for VM backups, host, user id, password,

and data store location.

Answer: D

QUESTION NO: 170

Which option(s) are available for VM backups?

A. VMWare file level

B. VMWare Full VCB Image

C. Hyper-V Consolidated ImageD. VMWare file level, VMWare Full VM and Hyper-V Full VM

Answer: D

QUESTION NO: 171

When using VMWare Full VM backup type with TSM Backup-Archive client which options need to

be selected?

A. VM machines to backup, VM host user id and password to use




55/69

B. domain full VM, VM options, VM host, VM folder, VM machines

C. VCB options, consolidated backup host name, user ID, password

D. no options need to be selected - once theVMWare Full is selected then VM does the rest

Answer: B

QUESTION NO: 172

The IBM Tivoli Storage Manager (TSM) server administrator must set up further improvement for

better and faster restore on the client side. Which TSM V6.2 option will provide the fastest disaster

prevention?

A. add active data pool

B. add more copy pools

C. add active data pool with copy pool

D. add management class to copy pool

Answer: C

QUESTION NO: 173

When using disaster recovery manager (DRM) and active data pools, which command allowsDRM to manage the active data pools?

A. setDRMDatapool

B. setDRMPRIMstgpool

C. setDRMCOPYstgpool

D. setDRMACTIVEDatastgpool

Answer: D

QUESTION NO: 174

Tape rotation is used with the disaster recovery manager (DRM). To achieve any tape rotation

further configuration is required. Which step must be taken to get the process started to achieve

the tape rotation for offsite volumes?

A. SET DRMFILEPROCESS

B. SET DRMACTIVEDATASTGPOOLC. movedrmedia * wherestate=mountable

D. movedrmedia * wherestate=vaultretrieve




56/69

Answer: D

QUESTION NO: 175

How is the activity log retention adjusted?

A. use the SET ACTLOGHISTORY command

B. use the SET ACTLOGRETENTION command

C. configure ACTLOGHISTORY using the DB2 SQL command prompt

D. configure ACTLOGRETENTION using the DB2 SQL command prompt

Answer: B

QUESTION NO: 176

Which command option should an IBM Tivoli Storage Manager V6.2 administrator use to specify

the number of days to keep information in the SQL activity summary table?

A. SET ACTLOGRETENTION

B. SET SUMMARYRETENTION

C. SET ACTLOGDETAIL

D. SET SUMMARYSTATUS

Answer: B

QUESTION NO: 177

Client FRED has been having problems getting the scheduled backup to complete. During the

nightly scheduled backups, there are 1000 different sessions running for scheduled clients and

data is being stored to various destinations of DISK and TAPE. For the scheduled backups whenFRED has failed, it has not been clear which error messages were issued that related to FRED's

scheduled session. Which administrator command is used to view errors related to FRED's failed

session?

A. queryactlog nodename=FRED

B. queryactlog sessions=FRED

C. query log format=detailedsession

D. begineventlogging eventserversession

Answer: A




57/69

QUESTION NO: 178

Which command is used before the initial database backup to establish the device class used for

database backups?

A. SET DBBACKUP

B. SET DBRECOVERYC. SET DBDEVCLASS

D. SET DBBACKUPCLASS

Answer: B

QUESTION NO: 179

What must be done before performing the initial database backup?

A. Add the database backup device class name to the dsmserv.opt file.

B. Add the database backup device class name to the dsmserv.dsk file.

C. Issue the SET DBDEVCLASS command to associate the default device class.

D. Issue the SET DBRECOVERY command to associate the default device class.

Answer: D

QUESTION NO: 180

When performing a command line full database backup, which two parameters are required?

(Choose two.)

A. TYPE

B. WAIT

C. SCRATCH

D. DEVCLASS

E. VOLUMENAMES

Answer: A,D

QUESTION NO: 181

A company has set up an environment with separate storage pools for backup and archive. There

is a storage hierarchy of tape and disk. The device class for the disk storage pool has the device

type of sequential file, so that deduplication can be used. If the storage pool on disk gets full, how

can the interruption of the backup process be prevented?




58/69

A. Increase the size of the disk storage pool.

B. Runthe migrate stg command in a specific interval so that the pool will always be emptied.

C. Runthe migrate stg interrupt=no command in a specific interval so that the pool will always be

emptied.

D. Adjust the high migration threshold so that automatic migration will be started early enough and

the backup process will not run ina out-of-space condition.

Answer: D

QUESTION NO: 182

In an environment with disk and tape storage pools in the primary pool hierarchy, data should be

migrated automatically when the disk storage pool gets full. What has to be adjusted in the

definitions of the primary storage pool to avoid an out-of-space condition during backup?

A. Set thelowmig threshold to a value below 10%.

B. Run a daily administrative schedule to set thehighmig threshold to 100%.

C. Adjust the number of migration tasks to the number of tape drives available and free for the

migration process.

D. Prevent migration during the backup task by specifying the valuenomig=backup in the storage

pool definitions.

Answer: C

QUESTION NO: 183

In which type of storage pool can migration be performed?

A. Co

Documents

000-037_TSM Cerfification for 6.1