Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
GENERAL TERMS OF PUBLICATION OF INFORMATION AND ADVERTISING MATERIALS IN THE OFFICIAL EXHIBITION CATALOGUE AND GUIDE
1. Terms of Information Publication and Advertising Placement in the Official Exhibition Catalogue and in the Official Exhibition Guide 1.1. In accordance with the General Terms of Participation in International Exhibitions held by Expocentre each registered exhibitor (participant) of the exhibition has to do the following:- present the company’s entry by filling in these application forms and sending them by e-mail or using Online Account : the company’s name (and/or name of other organisation, whose products (projects, services) are to be demonstrated at the space rented by the exhibitor), address, telephone, e-mail, web site, brief information on the company’s activity up to 200 characters, including spaces and punctuation (K1 Form),- select two headings for publication of brief information about the company from the List of Products and Services (K2 Form).1.2. The company’s entries (except for the logo and advertisement) in the Alphabetical List of the Official Exhibition Catalogue and in the List of Products and Services are also available in the Internet Catalogue within one year.1.3. The optional advertising of the Exhibitor may be placed in the Official Exhibition Catalogue and in the Exhibition Guide according to the prices mentioned in the application forms.1.4. In case the Exhibitor has not provided the company’s entry in Russian, the Publisher translates the text on his own. In that case claims for translation are not admitted.1.5. The application forms are to be completed and send in scanned form with signature and stamp of the exhibitor (participant). Please also provide the forms in Microsoft Word to avoid misreading or misspelling.1.6. The publisher retains the right to edit the Russian and English entries according to the norms of both languages.1.7. In case the application forms are sent after the deadline, the Publisher does not guarantee publication of the company’s entry in the printed Catalogue version.1.8. The Exhibitor shall be fully responsible for the content and accuracy of any information forwarded to the Publisher for publication regardless of the means of transfer of the said information.1.9. Any type of full or partial reproduction without special permission of the Publisher is prohibited.
2. Terms of Payment 2.1. The payment shall be made on terms of 100% prepayment. The payment shall be made by the Exhibitor according to the tariffs indicated in the application forms. The prices are indicated without VAT (20%).2.2. Commissions charged by the bank for the money transfer shall be additionally covered by the Exhibitor (for the non-residents of Russia).2.3. The Certificate of Acceptance of the Rendered Services shall be signed by the authorized representatives of the parties not later than on the last day of the exhibition dismantling period. In case the Exhibitor has not signed the acceptance certificate or declines to give a reasoned refusal to sign it within 3 days from the date of receipt of 2 copies of the said certificate from EXPOCENTRE AO, the services shall be considered rendered and the certificate signed.
3. Cancellation of the Publication and Changes in the Information Entry 3.1. Cancellation of the application or changes of the provided information are accepted not less than 20 days prior to the exhibition opening date.
4. Description of the Official Exhibition Catalogue and Guide4.1. The Catalogue comprises of two parts: the Alphabetical List of Exhibitors and the List of Products and Services.Circulation: 1 500 copies. Format: 160 х 230 mm (width х height)Number of pages: 240–2564.2. The Official Exhibition Guide comprises of the Alphabetical List of Exhibitors by pavilions and lay-outs of the exhibition pavilions.Circulation: 15 000 copies.Format: 210 х 297 mm (width х height)Number of pages: 48–564.3. The number of printed copies of the catalogue and guide can be changed depending on the number of exhibitors and expected visitors.
5. Technical Requirements for Advertising Materials5.1. Logos are to be sent in formats: Adobe Illustrator CS4, Corel Draw X6 and BMP, TIFF (full size with resolution not fewer than 300 pixels per inch). 5.2. All the materials for advertisements are accepted ready for publication in Adobe Illustrator CS4, Adobe Photoshop, QuarkXpress 4-6, Adobe InDesign CS2-4 and in TIFF, EPS. The vector part shall be in the EPS format. All fonts shall be converted into curves and uploaded to the layout as EPS-files. EPS-files shall not contain any fonts. The raster graphics shall be inserted into the EPS-file and filed separately.5.3. The format of advertisement is trimmed; please add 5 mm bleed off on all edges. The advertisement dummy creation is subject for the additional payment.
14, Krasnopresnenskaya nab., Moscow, 123100, RussiaEXPOCENTRECatalogue Department
tel: +7 (499) 795 29-52/53/02www.expocentr.ru
Exhibitor Stamp Exhibitor' signature Date
APPLICATION FORM for publication in the Official Catalogue: K.1NEFTEGAZ 2021Please return the completed form to the Catalogue Department: zubacheva @expocentr.ru
DEADLINEMarch 19, 2021
Tatyana Zubacheva +7 (499) 795 29-02 +7 (499) 795 29-52
ALPHABETICAL LIST OF EXHIBITORSCollective exposition organizer (if any)
Exhibitor (Participant)(name as in contract)
Country of company for List as to Countries
NAME FOR THE CATALOGUE (The company name will be alphabetized in the catalogue according to the first letter of the name)
Country Address
Telephone Fax
E-mail Web-site
Additional address - 30,00 EURO:
Pavilion Hall Stand
BRIEF INFORMATION ABOUT ACTIVITY* (200 characters, including spaces and punctuation are included in the participation cost.) Text in English
ADDITIONAL INFORMATION ABOUT COMPANY. Every subsequent line costs 35,00 EURO (50 characters per line).
Text in Russian (translation)
• Logo in the Alphabetical List of Exhibitors: .................................................................... 175,00 EURO• Logo in the Online Catalogue-Guide: .................................................................................. 175,00 EURO
Logo package services (the package description in K.2 form):• Package "Standard": ......................................................................................................... 295,00 EURO• Package "Standard Plus": ................................................................................................. 440,00 EURO• Package "Navigator": ........................................................................................................ 970,00 EURO• Package "Leader": ............................................................................................................. 1 115,00 EURO• Package "ALL INCLUSIVE": .............................................................................................. 1 615,00 EURO• Package VIP: ....................................................................................................................... 2 880,00 EURO
* The publisher retains the right to edit the Russian and English entries according to the norms of both languages.100% prepayment. Prices DO NOT INCLUDE VAT (20%).
Contact Person:
TEL.: E-mail:
Exhibitor Stamp Exhibitor' signature Date
APPLICATION FORM for publication in the Official Catalogue: K.2NEFTEGAZ 2021Please return the completed form to the Catalogue Department: zubacheva @expocentr.ru
DEADLINEMarch 19, 2021
Tatyana Zubacheva +7 (499) 795 29-02 +7 (499) 795 29-52
LIST OF PRODUCTS AND SERVICESExhibitor (Participant)(name as in contract)
NAME FOR THE CATALOGUE
Indicate TWO numbers of headings from the List of Products and Services which goes after this form.This is included into the participation cost.
EXTRA CHARGE PUBLICATION# Type of service Price,
EUROCheck
in1 Short information on the company (the company’s name, country, stand) under one heading 33,00
2 Complete information on the company under one heading (the company’s name, address, telephone/fax, e-mail, web-site, stand) 55,00
3 Logo under one heading 175,004 Additional information on the company’s activity under one heading (1 line — 50 characters) 35,005 Short information on the company under 3 headings 90,006 Complete information on the company under 3 headings 147,007 Logo under 3 headings 465,008 Color advertisement (68 х 70 mm) under one heading 235,009 Two color advertisements (68 х 70 mm) under two headings 425,00
10 Three color advertisements (68 х 70 mm) under three headings 600,00INDICATE NUMBERS OF ADDITIONAL HEADINGS in the List of Products and Services
PACKAGE PUBLICATIONSPackage Type of service Price,
EUROCheck
inStandard Publication of logo in the Alphabetical List of Exhibitors
+ logo in the online Catalogue-Guide 295,00
Standard PlusPublication of logo in the Alphabetical List of Exhibitors + logo in the online Catalogue-Guide + logo under one heading
440,00
Navigator Logo on a lay-out and color highlight in the List of Exhibitors in the guide + logo on a lay-out in the online Catalogue-Guide 970,00
LeaderPublication of logo in the Alphabetical List of Exhibitors + logo in the online Catalogue-Guide+ logo under one heading+ logo on a lay-out and color highlight in the List of Exhibitors in the Guide
1 115,00
ALL INCLUSIVE
Publication of logo in the Alphabetical List of Exhibitors + logo in each ordered heading in the List of Products and Services + logo in the Alphabetical Index+ logo in the online Catalogue-Guide+ logo on a lay-out in the online Catalogue-Guide+ logo on a lay-out and color highlight in the List of Exhibitors in the Guide
1 615,00
VIP ALL Inclusive + One page, color 2 880,001 Logo on a lay-out + color highlight in the List of Exhibitors in the Guide 735,00
2 Advertisement page in the Catalogue (160 x 230 mm) + advertisement page in the Guide (210 х 297 mm) 2 825,00
3 Running title in the Catalogue (160 x 15 mm) + running title in the Guide (175 х 15 mm) 5 145,00
100% prepayment. Prices DO NOT INCLUDE VAT (20%).
Contact Person: TEL.: E-mail:
CATALOGUE NEFTEGAZ 2021 • LIST OF PRODUCTS AND SERVICESSelect the relevant headings and enter their numbers in the K.2 form
Oil and gas geology
1.1 Methods of oil and gas fields exploration and prospecting
1.2 Geological survey equipment and apparatus
1.3 Core hole and exploratory well drilling equipment
1.4 Provision of services using advanced technologies in the field of oil and gas fields prospecting
1.5 Calculation of hydrocarbon raw materials resources
1.6 Oil and gas-field geology
Geophysical methods of oil and gas fields exploration and prospecting
2.1 Geophysical survey equipment, apparatus and methods
2.1.1 Seismic prospecting
2.1.2 Borehole seismic prospecting
2.1.3 Gravity prospecting
2.1.4 Electrical prospecting
2.1.5 Radioactive prospecting
2.1.6 Magnetic prospecting
2.1.7 Borehole magnetic prospecting
2.1.8 Geophysical survey
Oil and gas wells geophysical survey
3.1 Methods, equipment and apparatus for wells geophysical survey
3.1.1 Electrical logging
3.1.2 Electromagnetic logging
3.1.3 Radioactive logging
3.1.4 Gamma-ray logging
3.1.5 Neutron gamma-ray logging
3.1.6 Acoustic logging
3.1.7 Nuclear magnetic logging
3.1.8 Logging units and laboratories
3.1.9 Logging cables
3.1.10 Downhole instruments, geophysical signal sensors, sondes
3.1.11 Receiving apparatus and recording devices
3.1.12 Well logging truck hoists
3.1.13 Data transmission lines and channels
3.2 Methods, equipment and apparatus for open borehole geophysical survey
3.2.1 Well caliper logging. Calipers-profilers
3.2.2 Bed dip determination by logging data. Dipmeters
3.3 Methods, equipment and apparatus for cased well geophysical survey
3.3.1 Perforating and blasting work technique. Perforation and drilling-in quality control equipment
3.3.2 Casing cementing and condition quality control equipment
3.4 Technology and automation means of logging data gathering, storing, processing and interpretation
Oil and gas wells drilling
4.1 Drilling rigs
4.1.1 Drilling rigs move
4.1.2 Rig-up and rig-down
4.1.3 Drilling rigs power supply
4.1.4 Drilling rigs means of communication
4.2 Hole drilling equipment and tools
4.2.1 Drilling bits
4.2.2 Calibrators, reamers
4.2.3 Drill stem equipment, devices and tools
4.2.3.1 Drill pipes
4.2.3.2 Stabilizers, centralizers
4.2.3.3 Downhole drill stem assembly
4.2.3.4 Drill stem drive
4.2.3.4.1 Land drive. Rotors, transmissions, reducing gears, engines
4.2.3.4.2 Downhole motors. Hydraulic turbine downhole motors, electric downhole motors, screw downhole motors
4.2.4
Equipment and devices for bottom hole cleaning under hole drilling. Mud pumps, manifolds, hoses, shale shakers, hydrocyclones, sand and clay separators, sludge traps, desilters, settlers, receiving capacities, centrifuges, drilling mud degassers
4.3
Drilling mud mixing equipment. Dosimeters, mixers, ejectors, hydraulic giants, pneumatic pumps, stirrers, dispersing agents, centrifugal cutter pulverizers, crushers
4.4 Equipment and devices for tripping process under drilling
4.4.1 Derricks
4.4.2 Block and tackle systems. Ropes, crownblocks, travelling blocks
4.4.3 Drawworks
4.4.4 Drill pipes suspension equipment. Hooks, bails, elevators, wire rope clamps
4.4.5 Drill pipes making-and-breaking tools
4.4.6 Technique and technology of accident and trouble elimination in well drilling
4.4.6.1 Fishing tools: spears, die collars, taps, blocks, junk baskets
4.4.7 Hole deviation prevention
4.5 Directional drilling equipment and technology. Deflectors, bottom hole inclinometers
4.6 Technique and technology of horizontal wells drilling
4.7 Hole drilling control equipment. Drilling technological characteristics control and regulation
4.8 Formation testing. Formation testers, samplers
4.9 Formation segregation and well sealing
4.9.1
Technique and technology of well casing and cementing. Casing technological equipping. Casing pipes and their connections. Casing shoes, liners, well screens, casing valves
4.9.1.1 Casing string centering. Centralizers
4.9.2 Casing and well cementing
4.9.2.1 Well cementing methods and equipment. Cementing units, pumps, plugs, wellhead setup
4.9.2.2 Cement slurry mixing. Cement mixers, cement mixing units
4.9.3 Equipment and methods of well cementing quality and casing condition control
4.9.4 Drilling well sealing in the process of drilling. Blowout preventers, casing heads
4.10 Technique and technology of well completion. Compressors for well completion after drilling
4.10.1 Perforation drilling-in
4.10.2 Inflow stimulation and formation treatment for oil production
4.10.3 Oil and gas drilling
4.10.4 Integrated projects management, well construction services
4.11 Drilling mud services
Equipment and technology for offshore field development
5.1 Offshore drilling equipment
5.1.1 Support and guidance device equipment for offshore wells
5.1.2 Boring casing equipment for offshore wells with a depth of up to 6,500 m
5.2 Geology-prospecting equipment
5.2.1 Prospecting drilling rigs and components
5.2.2 Geological prospecting rigs and components
5.2.3 Drilling pumps and components for geological prospecting equipment
5.3 Drilling rigs and their components
5.3.1 Drilling rigs
5.3.2 Drill winches
5.3.3 Crown blocks
5.3.4 Travelling blocks, hook blocks
5.3.5 Swivels
5.3.6 Derricks
5.3.7 Block bases
5.3.8 Jacks
5.3.9 Shelters
5.3.10 Rotors
5.3.11 Brakes
5.3.12 Diesel-hydraulic units
5.3.13 Discharge manifolds, shut-off and control valves
5.3.14 Engine fuel and oil supply systems
5.3.15 Other components for drilling rigs
5.4 Drilling rigs electrical equipment
5.4.1 High voltage switchgears+D124
5.4.2 Power and converter transformers
5.4.3 Electric motors
5.4.4 Electronic control devices for drilling rig electric drives
5.4.5 Filter compensating devices
5.5 Lifting operations mechanization equipment
5.5.1 Machines
5.5.2 Wrenches
5.5.3 Slips
5.5.4 Side door elevators for drill and casing pipes
5.5.5 Lifting cranes
5.5.6 Hooks
5.5.7 Travelling blocks
5.5.8 Crane blocks
5.5.9 Circulation systems (CS) equipment for drilling fluid filtering and preparation
5.5.10 Units for drilling fluid preparation from powder materials
5.5.11 Circulation systems, blocks, mills
5.5.12 Solids control units, fluid desanders and grits
5.5.13 Tanks
5.5.14 Drilling fluid degassers
5.5.15 Drilling rig heating systems
5.5.16 Cleaning and regeneration units
5.5.17 Mixers and stirring machines
5.6 Loose materials Transportation and storage equipment
5.7 Special transportation and hoisting equipment for drilling operations
5.7.1 Bogies
5.7.2 Revolvong cranes
5.7.3 Assembly cranes
5.7.4 Lifts
5.8 Blowout prevention e+D153quipment
5.8.1 Preventors
5.8.2 Blowout prevention equipment manifolds
5.8.3 Equipment for conditions with a high toxic gases content
5.8.4 Well killing technical equipment
5.9 Drilling string assembly eqipument and tools
5.9.1 Latches and joints
5.9.2 Bottom hole assembly
5.9.3 Drilling l+D161atches
5.9.4 Drilling pipes
5.9.5 Centralizers
5.9.6 Drilling string valves
5.9.7 Wellheads
5.9.8 Ejectors
5.9.9 Float shoes
5.10 Hydraulic downhole drilling motors
5.10.1 Turbine downhole motors (turbodrills)
5.10.2 Screw downhole motors
5.10.3 Turbine screw downhole motors
5.10.4 Rotatory and reactive turbodrills
5.11 Rock cutting tools
5.11.1 Bore bits
5.11.2 Core bits
5.11.3 Core sampling equipment
5.12 Equipment for prevention and elimination of complications during well drilling and casing
5.12.1 Percussion impulse devices and auxiliary machines for elimination of casing sticking
5.12.2 Casing pipe longevity encreasing e+D179quipment
5.12.3 Casing string technological mountings (excl. packers)
5.12.4 Equipment for well repair and insulation works
5.12.5 Anti-absorption technical devices
5.13 Packers and anchors
5.13.1 Vibration dampeners
5.13.2 Auxiliary devices and tools
5.13.3 Blade stabilizers
5.13.4 Downhole motor centralizers
5.13.5 Stabilizers
5.13.6 Reamers
5.14 Offshore well operation equipment
5.14.1 Flowing well operation equipment
5.14.2 Rod pumping operation equipment
5.14.3 Rodless well operation equipment
5.14.4 Equipment for simultaneous separate reservoirs operation in a single w+D194ell
5.15 Well underground repair equipment and tools
5.15.1 Lifting winches
5.15.2 Lifting units
5.15.3 Units
5.15.4 Derricks and masts
5.15.5 Swivels
5.15.6 Crown blocks
5.15.7 Travelling blocks
5.15.8 Lifting hooks
5.15.9 Heel sheaves
5.15.10 Elevators
5.15.11 Operational links
5.15.12 Wrenches
5.16 Equipment for reservoir pressure maintenance
5.16.1 Centrifugal pumps
5.16.2 Pump stations of the reservoir pressure maintenance system
5.16.3 Injection well wellhead fittings
5.16.4 Submersible centrifugal electric pump units for reservoir pressure maintenance
5.17 Active reservoir stimulation equipment
5.17.1 Units and pumps for delivery of water and other liquids to the plunger pumps to the units
5.17.2 Steam generator units for reservoir steam injection
5.17.3 In-situ combustion front ignition and maintenance equipment
5.17.4 Equipment for water treatment, preparation of various chemicals solutions and metering
5.17.5 Reservoir gas injection equipment
5.17.6 Wellhead equipment for injection of various agents to the reservoir
5.17.7 Downhole equipment for injection of various agents to the reservoir (excl. packers)
5.17.8 Injection control equipment
5.17.9 Active Oil Reservoir Stimulation Equipment
5.17.10 Gas Rotary Compressor
5.18 Oil and gas collection and treatment equipment
5.18.1 Measuring units
5.18.2 Mass measuring units for stripper wells
5.18.3 Separating modular units
5.18.4 Modular oil pumping stations
5.18.5 Sewage water treatment discharge settlers
5.18.6 Modular pipeline heaters
5.18.7 Tube furnaces
5.18.8 Modular oil treatment settlers
5.18.9 Oil Field Sewage Water Treatment Settlers
5.18.10 Oil and gas treatment systems and units
5.18.11 Flare units
5.19 Equipment and tools for offshore well cementing and other technological processes
5.19.1 Mixing plants
5.19.2 Manifold units
5.19.3 Stage cementing collars
5.19.4 Cementing plugs
5.19.5 Cementing valves
5.19.6 Shutters
5.19.7 Turbulators
5.19.8 Cementing heads
5.19.9 Compressor plants
5.19.10 Equipment for well operations
5.19.11 Devices for acidizing of wells
5.19.12 Well dewaxing equipment
5.19.13 Electrical induction well heaters
5.19.14 Stage cementing tools
5.19.15 Cementing units
5.20 Pumping, ventilation and compressor equipment
5.20.1 Drilling pumps for geological prospecting equipment
5.20.2 Borehole Pumps for Oil Production
5.20.3 Cavity bottom-hole electrical pumps for oil production
5.20.4 Bottom-hole diaphragm electrical pumps for oil production
5.20.5 Hydraulic pumps for oil production
5.20.6 Centrifugal pumps for reservoir pressure maintenance
5.20.7 Pumping Units for Washover Jobs
5.20.8 Pumping Units for Acidizing of Wells
5.20.9 Pumping units for well cementing and other technological processes
5.20.10 Deep-well pumps
5.20.11 Pumping units, pumping plants
5.20.12 Oil main-line pumps
5.20.13 Pump assemblies and replaceable parts
5.20.14 Other pumps
5.20.15 Fans
5.20.16 Compressors
5.21 Electrical equipment for mining
5.21.1 Electrical equipment for drilling operations
5.21.2 Electrical equipment for oilfield operations
5.21.3 Electrical equipment for oil collection and treatment
5.21.4 Electrical equipment for oil and gas pipeline transportation
5.21.5 Other electrical equipment
5.22 Tools for oil and gas production equipment
5.23 Elevators
5.24 Fishing tools for elimination of accidents during drilling
5.24.1 Fishing pikes for drill strings
5.24.2 Collar sockets for drill strings
5.24.3 Funnels and other centering devices
5.24.4 Fishing tools
5.24.5 Milling bits
5.24.6 Reamer bits
5.25 Tools and devices for sidetrack kickoff
5.25.1 Deflectors
5.25.2 Mandrels
5.25.3 Deflecting devices
5.25.4 Orienting devices
5.25.5 Tools and devices for well deviation
5.26 Drilling tools (except for rock-destruction tools)
5.27 Fishing tools for production wells
5.28 Tools for drilling exploration wells
5.28.1 Exploration rods
5.28.2 Exploration drilling pipe joints
5.28.3 Casing cutters
5.28.4 Impression tools
5.28.5 Casing guns
5.28.6 Cat heads
5.28.7 Ejectors
5.28.8 Collars, grummets, clips
5.28.9 Swivel hooks, wedges and other devices
5.28.10 Other tools
5.29 Raw materials, reagents, materials
5.29.1 Chemicals and materials for preparation and adjustment of drilling mud properties
5.29.2 Reagents for stimulation of oil production
5.29.3 Reagents used for oil transportation
5.29.4 Reagents for purification of water, soil and air
5.29.5 Materials for well cementing
5.29.6 Heat, hydro and sound insulation
Oil and gas fields development
6.1 Oil and gas fields designing and construction
6.2 Field operation management. Field communication, field automatization and telemechanization
6.3 Methods and equipment for oil and gas production
6.3.1 Tubing, wellhead and bottom hole equipment of producing wells, filters
6.3.2 Flow oil production
6.3.3 Gas-lift oil production
6.3.4 Subsurface-pump oil production
6.3.4.1 Oil-well sucker-rod pump oil production
6.3.4.2 Submersible pump oil production
6.4Oil producing wells control and operation equipment. Telemetering bore hole systems, pumping station control systems
6.5 Instruments for oil producing wells production measurement and registration
6.6 Technique and technology of producing wells servicing
6.6.1 Gypsum formation and asphalt-resin-paraffin deposits control
6.6.2 Fishing operations in well servicing
6.7 Technique and technology of producing wells overhaul
6.8 Equipment and technology of simultaneous-selective multiple formation oil production
6.9 Technique and technology of injection wells maintenance
6.10 Downhole and wellhead equipment for gas and gas-condensate well operation
6.11 Equipment and enhanced oil recovery methods
6.11.1 Producing formation flooding
6.11.1.1 Surface-active agents oil displacement
6.11.1.2 Alkali oil displacement
6.11.1.3 Acids oil displacement
6.11.1.4 Polymers oil displacement
6.11.1.5 Hot water oil displacement
6.11.2 Gaseous medium, steam, in-situ combustion and miscible phase oil displacement
6.11.2.1 Oil gas injection into the bed
6.11.2.2 Air injection into the bed
6.11.2.3 Carbon dioxide injection into the bed
6.11.2.4 Steam injection into the bed
6.11.2.5 Miscible phase oil displacement
6.11.2.6 In-situ combustion
6.11.3 Near-bottom hole treatment of productive stratum
6.11.3.1 Well washing
6.11.3.2 Well blowing
6.11.3.3 Hydraulic fracturing of formation near-bottom hole
6.11.3.4 Casing string additional perforation
6.11.3.5 Thermal stimulation of formation near-bottom hole
6.11.3.6 Chemical stimulation of formation near-bottom hole
6.11.3.7 Thermochemical stimulation of formation near-bottom hole
6.11.3.8 Explosive stimulation of formation near-bottom hole
6.11.3.9 Ultrasonic intensification of oil and gas recovery
6.12 Oil field equipment corrosion prevention. Corrosion inhibitors
6.13 Equipment and technologies of oil and gas field gathering, processing and storing
6.13.1 Equipment and technologies of collection and processing of the oil gas
6.14 Crude oil and gas field transportation. Pipes and pipeline fittings of field pipelines. Boosters, compressors
6.15 Offshore producing wells operation equipment and technology
6.16 Associated petroleum gas treatment
Oil and gas transportation and storing
7.1 Technique and technology of oil and gas main pipelines construction
7.2 Oil and gas main pipelines maintenance
7.2.1 Equipment of main and relay pumping stations. Compressors for main pipelines gas transportation
7.2.2 Equipment and tooling of pipeline linear portion. Pipes, valving, compensators
7.2.3 Pipeline obstacle crossings construction
7.3 Equipment and technology of pipeline repair and accident elimination
7.4 Pipeline control equipment
7.5 Automation and telemechanization in pipeline oil transportation
7.6 Methods and means of pipes and main pipelines corrosion prevention
7.7 Railway transportation of oil, oil products and liquefied gas
7.8 Water transportation of oil, oil products and liquefied gas
7.8.1 River oil-loading transport
7.8.2 Offshore oil-loading transport
7.9 Vehicles for the transportation of oil, petroleum products and liquefied gas
7.10 Oil and gas storages
7.10.1 Tanks, tank farms, tank accessories
7.10.2 Production flow lines. Equipment, fittings. Production flow lines pumps. Pipeline lay out
7.10.3 Compressors for underground gas injection
7.10.4 Equipment and technology of oil and gas storage repair and accident elimination
7.10.5 Vapor recovery units of crude oil and oil products vapors
7.11 Operational and technological communication network of hydrocarbons transportation system
Modern equipment and technology of oil, gas, oil refining and petrochemical industry facilities construction, including offshore facilities
8.1 Road-building machinery
8.2 Pneumatic tools
8.3 Technology of construction of oil and gas facilities on permafrost soils
8.4 Creation of dispatcher boards and operator centers
Oil and gas processing equipment and technology
9.1 Petrochemical equipment
9.2Automatic and telemechanics systems. Control and measuring instruments. Controllers of oil and gas processing technological processes
9.3 Fire-retardant equipment
9.4 Air and gas separation technology
9.5 Pumps and valves for processing
9.6 Expert appraisal of industrial safety
9.7 Overhaul. Technical servicing and repair. Commissioning definitions
9.8 Reciprocating compressors
9.9 Dosing and filling equipment for petrochemical and refinery products
LNG: production, transportation, distribution and use, investments
10.1 Natural gas exploration
10.2 Equipment and technology for natural gas production, collection, treatment and transportation
10.3 Equipment and technology for natural gas processing and liquefaction
10.4 LNG storage tanks and other equipment
10.5 LNG loading and transportation to regasification unit
10.6 Equipment for LNG offloading, storage and regasification
10.7 Machinery for transportation to end users
10.8 Cryogenic technology for LNG, hydrogen and other cryogenic gases
10.8.1 Cryogenic valves, drives, and actuators
10.8.2 Cryogenic pipes, pipeline, transport tubes and acessories
10.8.3 Unloading arms, filling and discharging devices
10.8.4 Surface / underground / ship / FPSO tanks and storage systems
10.8.5 Tanks and pressure vessels
10.8.6 Compressors and pumps
10.8.7 Heat exchangers, evaporators, re-cooling technologies, separators, filters
10.8.8 Electrolysers
10.8.9 Measuring devices, flowmeters, sensors, controls
10.8.10 Safety equipment, pressure vents, leakage control devices, heat tracing systems, odorizers
10.8.11 Boil-off gas technologies
10.8.12 LNG motors, dual-fuel motors, power systems
10.8.13 IT, software control systems
10.8.14 Other
10.9 Applications
10.9.1 Liquefaction plants
10.9.2 Regasification plants
10.9.3 Storage / bunkering / pipelines
10.9.4 Marine applications: tankers, FPSO, LNG ships, ferries
10.9.5 Heavy duty transport (on-road, railways, air-transport)
10.9.6 Small scale LNG / decentralized systems / filling stations / storage systems
10.9.7 Green / synthetic fuels
10.10 Engineering
10.10.1 Components
10.10.2 Units, skids, systems
10.10.3 Industrial plants
10.11 Services
10.12 Consultations
Power and electrotechnical equipment for oil and gas complex. Cable production. Welding equipment
11.1Heating technology and systems for the use of renewable energy. Heat exchangers. ORC processes and technology
11.2 Electrical equipment and installation. Lighting equipment
12 New chemical substances and materials for oil and gas industry
Safety at fuel and energy facilities
13.1Labour protection and safety precautions of technological processes in gas-oil producing and gas-oil processing complex
13.1.1 Professional clothing, special footwear, survival aids
13.1.2 Medical equipment, medical educational aids, scientific and technical literature, training, services
13.1.3 Fire-fighting equipment. Fire and gas detection systems
13.2Prevention methods and technical means for elimination of environmental pollution under drilling, oil and gas production, transportation, storing, processing
13.2.1 Equipment and instrumentation. Ecological monitoring
13.2.2 Prevention of VOC emission. Vapor recovery, smell knocking down
13.2.3 Oil spill dispersants
13.3 CCTV and security systems
14 Laboratory equipment and analytical instruments, furniture. Mobile laboratories
15 Mobile industrial and domestic buildings
Equipment for oil plants, gas terminals, gas stations, fuel filling stations, CNG filling stations
16.1 Equipment for oil plants, gas terminals
16.1.1 Design and construction of oil plants and gas terminals
16.1.2 Tank equipment
16.1.3 Units for filling and discharge
16.1.4 Oil products metering equipment
16.1.5 Equipment for accounting and transshipment of liquid gases
16.1.6 Discharge devices
16.1.7 Loading/unloading racks
16.2 Gas engine fuel. Equipment for gas stations and CNG filling stations
16.2.1 Equipment for gas filling stations
16.2.1.1 Design and construction of petrol and gas filling complexes
16.2.1.2 Dispenser modules for gas stations
16.2.1.3 Tank equipment
16.2.1.4 Pumps, valves and filters for decontamination
16.2.1.5 Gas ball valves
16.2.1.6 Gas dispensers
16.2.1.7 Gas product counters
16.2.1.8 High-pressure hoses
16.2.1.9 Control panels, fuel level measuring devices
16.2.1.10 Management and funds transfer systems
16.2.1.11 Devices for fuel quality control
16.2.1.12 Lighting equipment
16.2.1.13 Equipment for vehicles running on LPG
16.2.2 Equipment for CNG filling stations
16.2.2.1 Input taps assemblies
16.2.2.2 Low pressure adsorption dehumidifiers
16.2.2.3 Reciprocating compressors
16.2.2.4 High pressure gas concentrators
16.2.2.5 Gas dispensers
16.2.2.6 Gas product counters
16.2.2.7 Control panels, fuel level measuring devices
16.2.2.8 Management and funds transfer systems
16.2.2.9 Lighting equipment
16.2.2.10 Equipment for vehicles running on LNG
16.3 Equipment for gas (petrol) stations
16.3.1 Design and construction of petrol and gas filling complexes
16.3.2 Tank equipment
16.3.3 Lighting equipment16.3.4 Fuel-dispensing units
16.3.5 Pumps and filters for decontamination16.3.6 Fuel nozzles
16.3.7 Fuel hoses16.3.8 Management and funds transfer systems
16.3.9 Control panels, fuel level measuring devices
16.3.10 Devices for fuel quality control
16.3.11 Lighting equipment16.4 Related services at gas stations
16.4.1 Equipment for mini-markets at gas stations16.4.2 Car wash equipment
16.4.3 Management and payment systems16.4.4 Trade, food
16.4.5 Advertising and advertising technologies16.4.6 Security and safety systems
16.4.7 Other
17 Economic research in all directions of gas-oil producing and gas-oil processing complexesResearch-and-development projects
18.1 Project examination18.2 R&D in oil & gas industry18.3 Standards in general industrial safety
Dataware and software
19.1 Scientific and technical literature19.2 Data bases19.3 Software19.4 IT solutions for engineering
Other
20.1 Paints and varnishes
20.2 Corrosion protection
20.3 High pressure injection pumps
20.4 Hydrostatic pressure test pumps
20.5 High pressure cleaning equipment
20.6 Enclosures
20.7 Terminal blocks with ATEX
20.8 Marking systems
20.9 Industrial Ethernet
20.10 Rotating machinery seals
20.11 Isolating and control valves
20.12 Transportation services
20.13 Process ventilation
20.14 Mobile heating units (HVAC) for drilling rigs
20.15 Quick connect couplings for all media
20.16 Personnel provision to oil & gas companies
20.17 Certification and expert evaluation services
21 Mass media
Exhibitor Stamp Exhibitor' signature Date
APPLICATION FORM for publication in the Official Catalogue: K.3NEFTEGAZ 2021Please return the completed form to the Catalogue Department: zubacheva @expocentr.ru
DEADLINEMarch 19, 2021
Tatyana Zubacheva +7 (499) 795 29-02 +7 (499) 795 29-52
ADVERTISEMENT
Exhibitor (Participant)(Company name as in contract)
NAME FOR THE CATALOGUE
# Type of advertisement in the catalogue Format of advertisement(width х height), mm Price, EURO Check in
1 2nd cover page 160 х 230 4 425,00
2 3rd cover page 160 х 230 4 120,00
3 4th cover page 160 х 230 5 000,00
4 Dividing page* right side 160 х 230 2 060,00
5 Dividing page* left side 160 х 230 1 910,00
6 Advertisement on the bottom running title of a page Maximum margin160 х 15 4 120,00
7 Color advertisement in Alphabetical List 68 x 70 235,00
8 1/2 advertisement page in Alphabetical List 140 х 94 805,00
9 One page, color 160 х 230 1 560,00
10 Two facing pages 320 х 230 2 795,00
* The catalogue can accommodate up to 8 (eight) dividing pages on thick paper
# Type of advertisement in the guide Format of advertisement(width х height), mm Price, EURO Check in
1 2nd cover page 210 х 297 4 705,00
2 3rd cover page 210 х 297 4 410,00
3 4th cover page 210 х 297 5 295,00
4 "Business card" on the guide page next to the name in the list of companies 42 х 35 675,00
5 ½ page, color 175 х 120 880,00
6 One page, color 210 х 297 1 675,00
7 Running title 175 x 15 2 945,00
# Other types of advertisement Price, EURO Check in
1 Logo on a lay-out in the online Catalogue-Guide on the Exhibition website 353,00
100% prepayment. Prices DO NOT INCLUDE VAT (20%).
Contact Person:
TEL.: E-mail: APPLICATION FORM for publication in the Official Catalogue:
Exhibitor Stamp Exhibitor' signature Date
K.4NEFTEGAZ 2021Please return the completed form to the Catalogue Department: zubacheva @expocentr.ru
DEADLINEMarch 19, 2021
Tatyana Zubacheva +7 (499) 795 29-02 +7 (499) 795 29-52
BANK DETAILSIf you order additional chargeable information to be published in the Catalogue-Guide, please fill in the form:
Exhibitor (Participant)(Company name as in contract)
NAME FOR THE CATALOGUE
Name of the company Название фирмы
The country Страна
Postal address Почтовый адрес
Legal address Юридический адрес
Tel.: Тел.
Fax: Факс
Tel. for contacts: Тел. для контакта
E-mail: Web-site:
VAT
Bank details (if payment is done from abroad)Банковские реквизиты (если платеж был сделан из-за границы)
Contact Person:
TEL.: E-mail: