Embed Size (px)
Citation preview
Tel : +91 4546 - 251020, 250076, Fax : +91 4546 - 253060, Mobile : +91 96009 92069
Email : [email protected] | [email protected],
Website : www.monarchindia.net
www.monarchindia.net | Toll - Free : 1800 - 425 - 1070
Waterproo!ng
Heat Re"ective Coatings
Adhesives & Sealants
Ø
Ø
Ø
Ø Surface Protective Coatings
Roof / Terrace Wall / Concrete Structure
Ø
Ø
Repair, Rehabilitation &
Strengthening
Grouts & Anchors
Ø
Ø
Ø
Construction Admixtures
Tile Grouts
Architecture & Decorative Coatings
Retrofitting / Renovation of
Old Buildings
Construction / Improvement
of new Buildings
Buildings & Civil Infrastructure Maintenance for Civil & Project Engineering
TM
Ø
Ø
Ø
Ø
Floor Screeds & Toppings
Surface Treatments
Electro Static Dissipative (ESD) &
Insulation Resistance (IR) Coatings
Road/ Floor Marking Coatings
Floor
Ø
Ø
Ø
Road/ Floor Marking Coatings
Fire Retardant Coatings
Electro Static Dissipative (ESD) &
Insulation Resistance (IR) Coatings
Safety
ww
w.r
oo
fwate
rpro
ofi
ng.i
n |
ww
w.a
cry
licw
ate
rpro
ofi
ng.c
om
Building protects us from nature forces like rain, heat, cold, wind etc., The concrete
structures on its own is porous and hence not watertight. The unprotected structures
suffer from water induced damage including deterioration and corrosion caused by
chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns
acidic. The result, reinforcement bar catch rust and eventually expands, to drastically
hamper load bearing capacity of the building structures. The continuous presence of
water leads to constant dampness & humidity and promotes the growth of molds and
fungus on walls and insects presence leading to health problem like asthma, skill
allergies, rashes etc.,The consequent spalling of concrete plaster, flaking off expensive
paint on interior/exterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during
constructions, it may result in costly and hassle prone repair work in future.
Monarch's technologically advanced MonoProof waterproofing systems cover every
need of Building & Construction industry to protect from water ingress or loss of water
through structures. The complete building structures from basement to roof are protected
from rising dampness, moisture, seepages and leakages from basement to roof. The
technology ranges to acrylic SBR latex, crystalline, epoxy, water repellant polysiloxanes,
polyurethane and bituminous based formulations. The coating fills and seals concrete
pores, micro cracks and capillary tracts in joints, walls and floors through which water seep
through and forms an integral waterproofing compound without breaking the existing
brickbat coba and concrete screed.
Permanent Protection from Water Leakages
Waterproofing
Range of Products
MonoBond AR
MonoProof LWP
MonoProof AEW
MonoProof RG
MonoProof SA
MonoProof CONC
MonoProof MD
MonoProof FWP
MonoProof DG
MonoProof SSP
MonoProof PWP
MonoProof WPU
MonoProof BWP
MonoWrap GTM 40
11901
11101
11102
11103
11104
11121
11122
11151
11152
11141
11161
21313
11131
11132
Name Code Pack Size Description
5 Kg
20 Kg
20 kg
20 Kg
20 Kg
25 Kg
25 Kg
10 Kg
20 Kg
20 Kg
5 Kg
4 Kg
5 Kg
4 Kg
Acrylic Primer for Concrete Surfaces
Acrylic modified cementitious coatings for concrete and masonry surfaces.
High Performance acrylic polymer modified elastomeric waterproofing membrane coating for
concrete and masonry surfaces
Rain protective and architectural acrylic anti-carbonation coating.
Single component, economical grade acrylic polymer waterproofing system
As a Waterproofing Coating : 1 part of MonoProof SA : 2 parts of neat cement
High Performance Cementitious Crystalline Concrete Waterproofing
Cementitious Crystalline Concrete Waterproofing
Two Component (2K) Polyurethane based Waterproofing Coatings.
Single component, Aliphatic, Water based Exterior PU Modified, Flexible Water Proofing
Membrane coating.
Silane/siloxane based hydrophobic impregnant Water Repellent Coating.
Bituminous Water proofing Coating For Sandwich constructions
Sandwich layer membrane to be applied between waterproofing coating for increasing
life & strength of coating with enhanced elasticity
Food Grade Lining & waterproofing coating for surfaces subject to contact with potable
water and food stuffs.
2K epoxy based dampproof coating for internal walls, ceiling and RCC water tanks.
Latex / Acrylic Modified Waterproof System
Crystallization based waterproofing system
Epoxy Based Food grade waterproofing system
Silane/siloxane based hydrophobic impregnant Water Repellent Coating
Polyurethane based waterproofing system
Bituminous based waterproofing system
Geo-Textile Fabric Membranes
Typical Properties
Application Master
Color
Specific Gravity
Viscosity
Mix Ratio
PH Value
Pot Life
Functional Cure
Water Absorption
Water VapourPermeability
Water Repellency
VOC Content
Tensile Strength
Elongation At Break
Flexural Strength
Compressive Strength
Adhesion Strength
Chloride Permeability(Reduction %)
Hydrostatic Pressure
Abrasion Resistance
Migration Test
Toxicity
Coverage @ Dft/Thickness/No.Of.Coats
~
~
Cps
Parts byweight
~
mins
hrs
%
g/m /day2
%
%
N/mm2
%
N/mm2
N/mm2
N/mm2
%
bar
mg/1000 cycles
ppm
~
~
ASTM D 1544
ASTM D 1475-98
ASTM D 1200-10
Manual
ASTM D 1293
IS 101
ASTM D 1640
ASTM D 570
ASTM E 96
ASTM D 5401-93
ASTM D 3960
ASTM D 412
ASTM D 412
ASTM D 790
ASTM D 695
ASTM D 4541
ASTM C 1202
ASTM C 1306
ASTM D 4213-08
IS 9845
BS 6920 -Part 1
~
Grey
1.8
23
1(R):3(A)
12
45
24
0.2
1.4
80
Nil
1.9
40
11
16.5
2
Negligible
4.5
15
6
Non Toxic
12.5sq.m/20kg/1mm/
2 coats
Grey
1.65
12
1(R):2(A)
12
45
24
0.3
1.5
83.5
Nil
2.2
45
14
16.5
1.5
Negligible
5
12
6
Non Toxic
12.5sq.m/20kg/1mm/
2 coats
CustomColor
1.155
15
Single
6.5
90
24
0.2
10
90
Nil
5.8
280
12
39
2
Negligible
3
10
7
Non Toxic
60 sq.m/20kg/110 mic /2 coats
Milky White
1.1
10
1(SA) : 2 (C)
7
90
24
0.5
No measurableleakage
80
Nill
1.6
40
10
15
1.8
Very Low
4
10
7
Non Toxic
100 sq.m /20 kg / coat *
Grey
1.7
Free FlowingPowder
Single
12
N/A
16
Nill
No measurableleakage
85
Nil
3
35
11
25
0.8
Very Low
7
15
7
Non Toxic
31 sq.m/25kg/ / coat
Grey
1.7
Free FlowingPowder
Single
12
N/A
8
Nill
No measurableleakage
82
Nil
3
35
12
25
0.8
Very Low
7
15
7
Non Toxic
28 sq.m/25kg/ / coat
Blue
1.65
10
6(R):1(H)
6.5
8
8
0.3
No measurableleakage
90
Nil
1.4
50
12
35
2.5
Negligible
6.5
8
5
Non Toxic
10 sq.m/5kg/200 mic /2 coats
CustomColor
1.18
17
1(R):1(H):1(W)
7
60
8
0.5
No measurableleakage
90
Nil
1.2
45
11
32
2.5
Negligible
6
9
6
Non Toxic
18 sq.m/4kg/100 mic /2 coats
Colorless
0.78
15
Single
6
N/A
2
0.8
10
95
65
N/A
N/A
N/A
N/A
2.8
Low
2
1
N/A
Slightly Toxic
53 sq.m/20 kg//3 coats
CustomColor
0.98
45
4(R):1(H)
7
10
1
0.6
No measurableleakage
86
25
2.4
80
10
25
1.5
Negligible
5.5
8
7
Slightly Toxic
50 sq.m/10 kg/100 mic
/2 coat
CustomColor
1.27
70
Single
8
90
5
0.2
8
90
Nil
1
300
11
20
2
Negligible
3
10
6
Non Toxic
15 sq.m/20 kg/1.2 mm
/ 2 coats
Black
1.15
30
Single
7
N/A
6
0.5
5
80
25
1.8
80
10
25
1.5
Negligible
4
8
7
Non Toxic
25 sq.m/5 kg/250 mic
/ 2 Coats
Sl.No. Properties Unit Standard MonoProofLWP
MonoProofAEW
MonoProofRG
MonoProofSA
MonoProofMD
MonoProofCONC
MonoProofFWP
MonoProofDG
MonoProofSSP
MonoProofPWP
MonoProofWPU
MonoProofBWP
Latex/Acrylic Modified WaterproofingSystems
Crystallization BasedWaterproofing Systems
Aqua Based Food gradeWaterproofing Systems
Silane/Siloxane Based HydrophopicImpregnant Water Repellent Coating
Bituminous Water Proofing Products
Polyurethane BasedWaterproofing Systems
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Water Tanks
Reservoirs
Swimming pools
Concrete Roofs, Parapet walls
Basement walls
Bathrooms, Balconies, Chajjah
Sunken portions, Toilet,
Podiums Surfaces
Bridge decks.
seawater channels.
water retaining structures
Vertical and overhead surfaces
Exterior or interior Wall celings
Cement plaster,
Old & new concrete & plaster
Spalled concrete in floors, Columns,Beams, Ramps
Corrosion protection of steel.
Underground vaults
Secondary Containment Structures
Tunnels and Subway Systems
Jetties, Parking structures
Elevator pits
Dairies and meat and food
processing plants
water treatment works, Breweries
Cement painted surfaces.Clay brick surfaces.
Natural and artificial stones.
Mangalore tiled roofs.Corrugated AC sheet roofing
Gyprock
Sandwich constructions
Sl.No. APPLICATIONMonoProof
LWPMonoProof
AEWMonoProof
RGMonoProof
SAMonoProof
CONCMonoProof
MDMonoProof
FWPMonoProof
DGMonoProof
SSPMonoProof
PWPMonoProof
WPUMonoProof
BWP
ü üü
üü ü ü ü
ü üü
ü
ü
ü ü
ü ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü üüü
ü
ü
ü
ü
ü ü
ü ü üü
ü ü ü ü ü üü
ü ü ü ü ü ü üü
ü
ü
ü
ü
ü
ü ü ü ü ü ü
ü ü ü
ü ü
ü ü
ü ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
üü
ü
ü ü
ü
ü ü
üü
ü ü
ü
ü
ü
ü
ü
ü
üü ü
ü ü ü ü
MonoProof LWP
MonoProof RG
MonoProof LWP is a two component acrylic modi!ed elastomeric waterproo!ng which consists of specialty
hard-wearing aggregates and liquid acrylic emulsion. It is a seamless, waterproof coating providing a tough and
durable water tight coating which cannot be easily damaged or worn away. The coating is designed to re-face and even
out variations in concrete and masonry surfaces.This is an easily brushable coating which can be simply applied by a stiff
brush, or trowel to obtain the desired thickness. The polymer provides with exceptional adhesion, toughness and
durability. MonoProof LWP effectively seals concrete masonry walls and bridges the shrinkage cracks which are static.
The coating additionally protects against concrete decay providing a long lasting barrier to waterborne corrosive salts,
freeze-thaw scaling, chloride, carbonation and atmospheric gases. A 1mm coating provides anti carbonation cover
equivalent to over 80cm of concrete or air layer thickness for carbon dioxide diffusion (R) of 92 meters. MonoProof LWP is
shown to resist positive hydrostatic pressure up to 7 meter head.
MonoProof RG is composed of high quality acrylic emulsion polymer. It is used as a waterproo!ng &
protective coating for exterior walls of the concrete & masonry buildings because it forms higher !lm thickness,
has excellent "exibility, breathing properties, water resistance, crack-bridging ability, weathering durability and
an excellent resistance to the growth of micro organisms.
Latex Modi!ed Waterproo!ng
Rain protective and acrylic anti-carbonation Waterproo!ng
Latex / Acrylic Modified Waterproof System
MonoProof AEW
MonoProof AEW is a three-layer system with coats in different colors ensuring proper build-up of the
thickness, making it a reliable waterproo!ng system. MonoProof AEW is a two component acrylic modi!ed elastomeric
waterproo!ng which consists of specialty hard-wearing aggregates and liquid acrylic emulsion. It is a seamless,
waterproof coating providing a tough and durable water tight coating which cannot be easily damaged or worn away.
The coating is designed to re-face and even out variations in concrete and masonry surfaces. This is an easily brush able
coating which can simply be applied by a stiff brush, or trowel to obtain the desired thickness. The polymer provides
with exceptional adhesion, toughness and durability. MonoProof AEW effectively seals concrete masonry walls and
bridges the shrinkage cracks which are static.The coating additionally protects against concrete decay providing a long
lasting barrier to waterborne corrosive salts, freeze-thaw scaling, chloride, carbonation and atmospheric gases. A 1mm
coating provides anti carbonation cover equivalent to over 80cm of concrete or air layer thickness for carbon dioxide
diffusion (R) of 92 metres. MonoProof AEW is shown to resist positive hydrostatic pressure up to 7 meter head
MonoProof AEW is suitable for all types of structures including those in coastal environments.
High Performance acrylic polymer modi!ed elastomeric waterproo!ng
Crystallization based waterproofing system and support products
MonoProof MD
MonoProof MD is a surface applied, unique chemical treatment for the waterproo!ng, protection and repair
of concrete. It consists of grey Portland cement, specially treated quartz sand and !llers, and a compound of active
chemicals. MonoProof MD can be applied as a second coat to reinforce MonoProof Conc, or applied by itself to damp-
proof the exterior of foundation walls. Applied as a second coat, MonoProof MD chemically reinforces MonoProof Conc
where two coats are required and produces a harder !nish. Where damp-proo!ng is required, a single coat of
MonoProof MD may be used as an alternative to a spray/tar emulsion. MonoProof MD prevents the penetration of water
and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation
within the pores and capillary tracts of concrete and cement-based materials. MonoProof MD is a particularly suitable
slurry for !lling air bubbles and voids in weak and porous surfaces.
Cementitious Crystalline Concrete Waterproo!ng
MonoProof CONC
MonoProof Conc is a unique chemical treatment for the waterproo!ng, protection and repair of concrete.
MonoProof Conc is the most chemically active product within the MonoProof Crystalline Waterproo!ng System. When
mix with water, this light grey powder is applied as a cementitious slurry coat to above-grade or below-grade concrete,
either as a single coat or as the !rst of a two-coat application. It is also mixed in Dry-Pac form for sealing strips at
construction joints, or for the repairing of cracks, faulty construction joints and honeycombs. MonoProof Conc prevents
the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-
soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials. When
MonoProof Crystalline Waterproo!ng is applied to a concrete surface the active chemicals combine with the free lime
and moisture present in the capillary tract, to form insoluble crystalline complexes. These crystals block the capillaries
and minor shrinkage cracks in the concrete to prevent any further water ingress (even under pressure). However, the
MonoProof Crystalline Waterproo!ng layer will still allow the passage of water vapor through the structure (i.e. the
concrete will still be able to "breathe"). In addition to waterproo!ng the structure, MonoProof CrystallineWaterproo!ng
protects concrete against sea water, waste water, aggressive ground water and certain chemical solutions.
High Performance Cementitious Crystalline Concrete Waterproo!ng
MonoProof SA
MonoProof SA, is the single component acrylic that is mixed with neat cement for effective and
economical method of waterproo!ng to concrete and masonry surfaces. It is formulated for simply brush applied
over concrete or masonry surfaces to provide an effective waterproof membrane
• As a Primer: 1 part of MonoProof SA : 2 parts of Water : 4 parts of neat cement
• As a Waterproo!ng Coating: 1 part of MonoProof SA : 2 parts of neat cement
Single component, economical grade acrylic polymer waterproo!ng system
MonoProof FWP
MonoProof SSP
MonoProof FWP is 2 pack, solvent free epoxy material used for lining and Water proo!ng potable water
retaining structures and surfaces subject to contact with food stuffs. The material cures to provide a smooth, hygienic
and tough !nish which is suitable for contact with potable water and foodstuffs. The cured !lm is resistant to corrosion,
chemical attack and abrasion. The cured !lm is non-toxic and meets the requirements of IS: 9833 - 1981. The coating is
designed to be applied in two coats to achieve a minimum total dry !lm thickness of 200 microns.
MonoProof SSP, is a clear, breathable, solvent-based, siloxane/silane penetrating water-repellent sealer used
to provide water repellent surface with improved self-cleaning properties on exterior building - brick work, concrete,
cement rendering, natural or cast stone. Helps in reducing efflorescence due to soluble salts in brickwork. The coating is
colorless and preserves natural color and texture of created material. It penetrates into concrete for a minimum depth of
penetration of 5mm ensuring hydrophobic zone.
Permeability is low to water, salt solution, dust and soot particles. Leaching of soluble salts from brick work,
which causes efflorescence, absorption of deicing salts by concrete which causes degradation and absorption of
atmospheric dirt by brickwork, concrete and stone are all minimized.
Food Grade Lining & Waterproo!ng
Solvent Based Water Repellent Coating
Epoxy Based Food grade waterproofing system
Silane/siloxane based hydrophobic impregnant Water Repellent Coating
MonoProof DG
MonoProof DG is used as internal coating for the waterproo!ng treatments of water tanks and building walls
because it can be applied over damp surfaces, has excellent water resistance, adhesion, hardness & toughness and sets
faster similar to solvent based epoxy formulations. It has an advantage of dilution with water for application over
cementitious surfaces.
Dampproof Coating
MonoProof PWP
MonoProof BWP
MonoProof PWP two component, aliphatic, thixotropic, non-yellowing, non-chalking, pigmented
polyurethane based elastomeric waterproof coating possessing good resistance to long term exposure of UV rays and
provides an easily cleaned coating. The cured !lm shall be protected with concrete screed / mortar when used on
accessible roofs to avoid damage from foot traffic.
MonoProof BWP is a ready mixed coating, brush applied bituminous, black, lead- free, acid, alkali, water and
chloride resistant that cures by reaction with atmospheric moisture to form a tough but "exible waterproo!ng
membrane.They also meet the requirements for coatings suitable for use on surfaces in contact with potable water.
MonoProof BWP are based on raw materials which are amongst the most water and water-vapor resistant
surface coating materials available. They are also resistant to a wide range of chemical attack. Also to protect the
concrete against effects of chlorinated water, and to inhibit algae growth and facilitate easier cleaning. The excellent
chemical resistance of MonoProof BWP makes it particularly suitable for sub-structure applications in areas where
chemical contaminants and aggressive ground water conditions prevail.
Note : In common with all bituminous and tar based coatings, and many other organic materials, MonoProof
BWP are susceptible to prolonged exposure to ultraviolet light and are not recommended for use in situations where
they will be exposed to direct daylight. They are however, ideally suited for use in sandwich constructions, or as surface
coatings in enclosed tanks or structures, or below ground, where their durability is well proven.
Two Component (2K) Polyurethane based Waterproo!ng Coatings.
Bituminous Water proo!ng Coating For Sandwich constructions
Polyurethane based waterproofing system and support products
Bituminous based waterproofing system
MonoProof WPU
MonoProof WPU is a "exible, single component aliphatic liquid membrane. It cures to a permanently "exible
seamless membrane that has good adhesion to a wide range of substrates unlike more traditional bitumen based
products. The coating is crack-bridging, does not readily embrittle with age, exposure to ultra violet radiation or
weathering, and hence it does not crack or craze due to its "exible properties. It is elastomeric and hence not adversely
affected by extremes of temperature.
Water Based Poly urethane Water Proo!ng Coatings
DEALERSHIP ENQUIRIES SOLICITED - Excellent Returns Assured
: monarchindia.net : [email protected] : +(91)-9600992069
Follow us on :
Clientele List
NLC
