Embed Size (px)
Citation preview
… the leading energy management services company in the region
History
Key Highlights
Geography
Prominent Memberships
Founded in 1991 as the first company in the Middle East to provide Energy Management Solutions.
Over 20 years of regional experience in energy efficiency with over 40 professionals, multinational energy architects and experts.
Activities in UAE, Saudi Arabia, Kuwait, Bahrain, Qatar, Jordan, Djibouti, Egypt &Lebanon.
More than 800 projects in the region with more than 200 million square feet of built up area.
• Full Accreditation as ESCO by RSB - DSCE• US Green Building Council (USGBC)
• An active founding member of Emirates Green Building Council (EGBC)• Green building consultant for Environmental Health and Safety (EHS)
• Commissioning Agent for (EHS)• Jordan Green Building Council (JGBC)• Saudi Green Building Council (SGBC)
• American Society of Heating Refrigerating and Air-conditioning (ASHRAE)• Association of Energy Engineers (AEE)
MEMBERSHIPS
WORKING WITH
EMS MAJOR CLIENTS
EMS - ACADEMY
ACADEMY
www.ems-int.com
EMS Academy:‘It is not what you know,
but what you can do with what you KNOW’
RESOURCES
Use of advanced energy audit software, library
access to wealth of regional & global case studies. CSR POLICIES
Vigorous in-house applications of sustainability
principles.
THOUGHT LEADERSHIP
Award Winning Professionals –
Pioneering expertise in MENA region.
EDUCATION
WorkshopsCertifications for
Members.
HR TRAINING
Continuous upgrade of staff skills to
keep in step with industry.
SMART PROPERTY SOLUTIONS
COMMISSIONING SOLUTIONS
ENERGY VALUE ANALYSIS
ENERGY MODELLING ENERGY DOCTOR CLEAN DEVELOPMENT
MECHANISMNATIONAL ENERGY
MANAGEMENT PROGRAM
GREEN BUILDING CERTIFICATIONS
CLIENT’S APPRECIATION
SPS(SMART PROPERTY SOLUTIONS)
Energy Efficiency
…Energy Efficiency is the most cost-effective and reliable means of mitigating global climate change.
Two main ways to save energy…
Energy Conservation
Energy is conserved using fewer services and utilities that require energy.
Energy Efficiency is increased such that same services are delivered with less usage of energy.
Energy Management…
www.ems-int.com
Energy management is the management of processes and policies
designed to reduce energy consumption.
Importance of Energy Conservation
www.ems-int.com
Reduce operational expenses Soaring bills
Economic Growth – Higher Energy Demand
Social Corporate Responsibility
higherEfficiency & Profitability
Technological Advancement – Availability of Energy Saving Products & Systems
Development Regulations
Rising Tariffs
Power Shortages – Shutdowns
DRIVERS
60%Energy, Water & IAQ
15%Transportation
15%Materials & Waste
10%Site and Others
www.ems-int.com
Essential FOR GREEN BUILDING RATING- Emphasis On Energy & Water
EN
ER
GY
EFFIC
IEN
CY
P
RO
GR
AM
STAGES TO ACHIEVE ENERGY EFFICIENCY IN EXISTING BUILDINGS
www.ems-int.com
Stage 5 - Performance Measurement
Stage 4 - Implementation
Stage 3 - Detail Audit
Stage 2 - Preliminary Audit
Stage 1 - Top Management Commitment
www.ems-int.com
TOP MANAGEMENT COMMITMENT
B- Assign Resources / Team
A- Institute an EnergyEfficiency Policy
Management Mandate to;
www.ems-int.com
Objectives
Quick Audit
Short inspection, survey and analysis of energy flows in a building, process or system.
PRELIMINARY AUDIT
and establish initial feasibility of implementing the energy conservation techniques
Identify opportunities to recapture energy or improve energy systems efficiency
Report findings..
Identify major Energy Saving
Opportunities (Low hanging
fruit)
Walkthrough visit
Huddle with Operating team
Utility Bills & Project Information Energy index - kWh/(m2, Prod. Unit)
Produces a “Business Case” for each identified energy saving opportunity, detailing: achievable Savings, expected cost, life
cycle analyizes, and the simple Pay-Back-Period.
Electricity Con-sumption Dis-
tributionHVAC
THE DETAILED AUDIT
Collecting energy bills
Site measurements and monitoring - Major Equipment/Systems
Benchmarking consumption & influencing parameters
Interaction with operation personnel, Suppliers & contractors
In depth analysis of consumption, opportunities and costs
More accurate estimates of savings and Investment cost
Saving Measures with - CAPEX and OPEX
Detail Audit Report
Findings presentation
Work Program
IMPLEMENTATION
Commissioning - and Verification of the commissioning results
Supervision
Mock-ups
Negotiate Contracts
Review submittals
Tendering
Specifications
Service & Maintenance
Track and maintain documentation
Consumption, weather, occupancy, added loads, operating hours, etc
Benchmark adjustments
International Protocols for Monitoring & Verification
Continuous Monitoring
On- going fine tuning of implemented systems
Monthly Reports
PERFORMANCE MEASUREMENT
Savings & Performance maintained 24 X 7 X 365
Energy Engineers continuously monitoring and optimizing energy savings.
Diagnostic Tool
Fine tuning of Energy Saving Measures
Dashboards
Generates Reports – Creating a historic log for the facility.
CONTROL COMMAND CENTRE - CCC
Benchmarking
Monitoring & control feature
Reduced maintenance
Energy savings - greater than 15% with around 3 years payback
Replacement of inefficient equipment with new energy efficient systems
BENEFITS OF ENERGY MANAGEMENTPROGRAM FOR EXISTING
www.ems-int.com
CARBON CREDITS
CERs - Certified Emission Reductions - Under CDM (Kyoto Protocol)
ERUs - Emission Reduction Units - Europe
VERs - Verified Emission Reductions – Voluntary
An efficient way to reduce greenhouse gas emissions by giving them a monetary value. A credit gives the owner the right to emit one tone of carbon dioxide.
CASE STUDIES
www.ems-int.com
SOME OF EMS PROJECTS – FACTS & FIGURESCLIENT’S NAME:
Etisalat Facilities Management
PROJECT:Etisalat Energy Saving Project (358 Sites)
LOCATION: UAE
SCOPE OF SERVICES:Performed Energy Audit, Financed, Being Implemented, M&V, Project Management
SAVINGS:20% AED 12.5 Million / Year Payback = 1.5 years
“Largest energy
saving project in
the MENA
Region with 358
sites”
www.ems-int.com
SOME OF EMS PROJECTS – FACTS & FIGURESCLIENT’S NAME:Rotana Group
PROJECT:Al Bustan Rotana Hotel Dubai
LOCATION: Dubai
SCOPE OF SERVICES:EPerformed Energy Audit, Financed, Implemented, M&V, Project Management
SAVINGS:24% AED 2.0 Million / Year Payback = 1.5 years
www.ems-int.com
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec -
200,000
400,000
600,000
800,000
1,000,000
1,200,000
1,400,000
1,600,000 BeforeAfter
SOME OF EMS PROJECTS – FACTS & FIGURESCLIENT’S NAME:Abdulla Al Moosa
PROJECT:Al Khaleej Center
LOCATION: Dubai
SCOPE OF SERVICES:Performed Energy Audit, Financed, Implemented, M&V, Project Management
SAVINGS:18.5% AED 1.0 Million / Year Payback = 2.7 years
www.ems-int.com
SOME OF EMS PROJECTS – FACTS & FIGURESCLIENT’S NAME:
HH Sheikh Khaled Al Qasimi
PROJECT:Oasis Tower, Dubai – Residential
LOCATION: Dubai
SCOPE OF SERVICES:Performed Energy Audit, Financed, Implemented, M&V, Project Management
SAVINGS:21.5% AED 630,000 / Year Payback = 1.8 years
www.ems-int.com
Sheraton Amman
SOME OF EMS PROJECTS – FACTS & FIGURESCLIENT’S NAME:Sheraton Amman
PROJECT:Sheraton Hotel
LOCATION:Amman, Jordan
SCOPE OF SERVICES:Conducting a comprehensive energy audit to identify
energy saving opportunities and saving percentages
Determining the required investment and payback period
Implementing the approved energy saving measures
SAVINGS:11.8% Monetary Savings of USD $120,000
www.ems-int.com
SOME OF EMS PROJECTS – FACTS & FIGURES
CLIENT’S NAME:RAK Ceramics Group
PROJECT:RAK Ceramics – Factory
LOCATION: Ras Al Khaima
SCOPE OF SERVICES:Conducting a comprehensive energy audit to identify
energy saving opportunities and saving percentages
Determining the required investment and payback period
Implementing the approved energy saving measures
SAVINGS:AED 3.9 Million/Yr
9.8%1.6 Yrs Payback
Project Name Location Project Name Location
Le-Meridien Hotel Abu Dhabi Skywalk Tower Dubai
Gulf Hotel Abu Dhabi Marina Mall Abu Dhabi
JW Marriot Hotel Dubai EMAAR HQ Dubai
Green Community Dubai Commercial Bank of Dubai HQ
Dubai
World Trade Centre Dubai Jordan New Cables Jordan
Riveira Tower Sharjah SkyTower 1&2 AbuDhabi
Manara Tower Sharjah Energy City Qatar Qatar
JumalMajid HQ Dubai Hadeed Steel Factory Saudi Arabia
Lamcy Plaza Dubai Al-Zay Ready Wear Jordan
Silver Tower Abu Dhabi Dove Processing Lebanon
Emirates Training College
Dubai Islamic Hospital Jordan
Al-Kiena Hygienic Paper Mill
Jordan Jeddah Tower Saudi Arabia
www.ems-int.com
SAMPLE LIST OF ENERGY EFFICIENCY PROJECTS EXECUTED IN THE MIDDLE EAST
SMART PROPERTY SOLUTIONS
COMMISSIONING SOLUTIONS
ENERGY VALUE ANALYSIS
ENERGY MODELLING ENERGY DOCTOR CLEAN DEVELOPMENT
MECHANISMNATIONAL ENERGY
MANAGEMENT PROGRAM
GREEN BUILDING CERTIFICATIONS
CLIENT’S APPRECIATION
GREEN BUILDING CERTIFICATION
Buildings that significantly reduce or eliminate the negativeimpact on the environment and occupants.
Green building design and construction practices address:
Sustainable site planning
Safeguarding water and water efficiency
Energy efficiency and generation
Conservation of materials and resources
Indoor environmental quality
WHAT IS A GREEN BUILDING
Benefits
Lower operating costs
Improved Indoor Air Quality
Lower Insurance premiums
Clients Demanding Green Buildings
Higher occupancy rates
Higher market values
Higher future capital value
Productivity Gains
Reduced Life Cycle Costs
More Satisfied Owner,Operators and Users
BENEFITS FOR BUILDING OWNERS INCLUDE:
10-12 cm/year rainfall (according to LEED, an arid climate is anywhere with less than 20 inches (50 cm).
45C Summer Temperatures with High Humidity (ASHRAE climate zone 1A, with approximately double the limit of CDD10C of 5000).
Air Quality (consistent high levels of PM10u, recent values of 285ug/m3, listed as high dust haze, the highest rating by DM).
Very Limited Vegetation
APPLYING GREEN BUILDINGS IN THE GULF REGION
Environmental Health and Safety of Dubai World (EHS)
Dubai Municipality (DM)
Estidama
Qatar Sustainability Assessment System
Master Developer requirements
APPLYING GREEN BUILDING IN THE GULF REGION
Limited culture of Environmentalism (professionally and socially)
Historical?
Transient populations
Rapidly developing economies lead to other priorities
Lack of governmental or non biased scientific information
LEED and green building design relies on ancillary information and organizations
APPLYING GREEN BUILDING IN THE GULF REGION
A new but developing market of green materials
Paint, adhesives, recycled content, certified wood, solar thermal and PV
Local materials
Not a lot of building materials are produced in the region
Cement, stone, ceramics
APPLYING GREEN BUILDING IN THE GULF REGION
LEED
Building Design and Construction (BD+C)Interior Design and Construction (ID+C)Core and Shell (CS)Neighborhood Development (ND)Existing Building Operation and Maintenance (EBOM)
Estidama
BuildingsVillasCommunities
QSAS
ServicesGreen Building Certification Guidance and CoordinationGreen Building Construction ManagementEnergy and Daylight Modeling
GREEN BUILDING RATING SYSTEM
CASE STUDIES
CLIENT’S NAME:Saudi Aramco
PROJECT: King Abdullah Petroleum Studies & Research centre (KAPSARC)
LOCATION: Saudi Arabia, Riyadh
SCOPE OF SERVICES:LEED NC
Green Building Construction Management
APPLYING GREEN BUILDING IN THE GULF REGIONCLIENT’S NAME:
Aramex
PROJECT: Aramex Warehouse – Jordan (LEED Silver)
AramexMashreq Warehouse – Egypt (LEED Silver)Aramex Info Fort – Egypt (LEED Gold)
Aramex Warehouse – Alexandria (LEED Gold)Aramex 3PL – Oman (LEED Silver)
AramexWarehouse – Lebanon (LEED Gold)
LOCATION: Saudi Arabia, Riyadh
SCOPE OF SERVICES:LEED BD+C
Design & construction guidelines LEED certification process
Energy Modeling and Daylighting simulation LEED Commissioning
LEED NC Green Building Construction Management
SAVINGS:17 to 38%
CASE STUDY: GREEN SOLUTIONS/LEED CERTIFICATION
CLIENT’S NAME:World Health Organization
(WHO – Gold LEED Certification)
PROJECT:WHO office - New Building in Amman - Jordan
LOCATION: Amman, JordanBUILT UP AREA: 4,100 m2
SCOPE OF SERVICES:LEED BD+C
Design & construction guidelines LEED certification process
Energy Modeling and Daylighting simulationLEED Commissioning
ENERGY VALUE ENGINEERING and Value Engineering for the MEP design
SAVINGS:22.5%
43
CASE STUDY: GREEN SOLUTIONS/LEED CERTIFICATION
CLIENT’S NAME:US Navy – Djibouti
PROJECT:Djiboti Fire Station – US Navy
SCOPE OF SERVICES:LEED BD+C
Design & construction guidelines LEED certification process
Energy Modeling and Daylighting simulationLEED Commissioning
SAVINGS:27%
CASE STUDY: GREEN SOLUTIONS/LEED CERTIFICATION
CLIENT’S NAME:The Total Office
PROJECT:The Total Office Showroom – Abu Dhabi
SCOPE OF SERVICES:LEED CI
Design & construction guidelines LEED certification process
Daylighting simulationLEED Commissioning
First LEED Certified project in Abu Dhabi
SMART PROPERTY SOLUTIONS
COMMISSIONING SOLUTIONS
ENERGY VALUE ANALYSIS
ENERGY MODELLING ENERGY DOCTOR CLEAN DEVELOPMENT
MECHANISMNATIONAL ENERGY
MANAGEMENT PROGRAM
GREEN BUILDING CERTIFICATIONS
CLIENT’S APPRECIATION
www.ems-int.com
• Commissioning is a process of verifying and documenting that the
building Energy Systems are designed, installed and operated efficiently according to owner’s requirements and basis of design• It begins in pre-design and continues through design,
construction, and occupancy of the facility
• Commissioning is often misinterpreted as ‘Testing and Balancing’ (TAB), which is an activity at the end of construction by a contractor
WHAT IS BUILDING COMMISIONING?
www.ems-int.com
Occupancy & Operation
Pre-Design
Design
Construction
Occupant Needs
• Improves maintainability of equipment/systems
• Reduces Contractor callbacks
• Lower operation and maintenance cost
• Trained building operators
• Better building documentation
• Early detection of potential problems
• Lower energy use and cost
• Systems perform as intended
• Satisfied occupants and stakeholders
COMMISSIONING BENEFITS
www.ems-int.com
Better maintenance and operating procedures
Better protection of the equipment life expectancy
Confirmation of the energy efficiency of the building systems
COMMISSIONING BENEFITS
www.ems-int.com
Assisting the Design and Construction Team
BENEFITS OF COMMISSIONING
www.ems-int.com
“…yeah, they’re
substantially complete,
but…”
SOME OF EMS PROJECTS – FACTS & FIGURES
www.ems-int.com
Commissioning helps fill the gaps
in coordination between the
construction team
Commissioning encompasses “All”
BENEFITS OF COMMISSIONING
www.ems-int.com
The Commissioning (Cx) Process involves steps that are integrated into every phase of the project:
Commissioning is NOT just testing at the end!
PRE-DESIGN DESIGN CONSTRUCTIONOCCUPANCY&OPERATION
THE COMMISSIONING PROCESS
www.ems-int.com
EMS was involved during design and construction phases of the project.
• Stadium lighting
• Stadium cooling
• Photovoltaic Cells for power generation
• Solar Air conditioning
FIFA SHOWCASE 2022 STADIUM
CLIENT’S NAME:ESG Group
PROJECT:FIFA Showcase stadium 2022
LOCATION: Qatar
SCOPE OF SERVICES:LEED Commissioning
www.ems-int.com
Sandoval Gardens Commissioning services carried out for the following systems:
EMS was involved during design and construction phases of the project.
• Water heating
• Lighting
• Air Conditioning
SANDOVAL GARDENS, DUBAI
www.ems-int.com
170,000 m2 Tower forADNOC headquartersThe commissioning scope covers:
• Water services
• Water heating
• Lighting
• Air Conditioning
ADNOC HEADQUARTERS, ABU-DHABI
EMS was involved during design and construction phases of the project.
www.ems-int.com
170,000 m2 Towers in Riyadh,Saudi ArabiaThe commissioning scope covers:
EMS was involved during design and construction phases of the project.
• Solar water heating
• Water heating
• Lighting
• Air Conditioning
KING ABDULLAH FINANCIAL DISTRICT PLOTS
3.04 & 3.05, SAUDIA ARABIA
www.ems-int.com
LEED Commercial InteriorProject in Abu-DhabiThe scope of work covers:
• Water services
• Lighting
• Air Conditioning
THE TOTAL OFFICE, ABU-DHABI
EMS was involved during design and construction phases of the project.
ENERGY VALUE ANALYSIS
SMART PROPERTY SOLUTIONS
COMMISSIONING SOLUTIONS
ENERGY VALUE ANALYSIS
ENERGY MODELLING ENERGY DOCTOR CLEAN DEVELOPMENT
MECHANISMNATIONAL ENERGY
MANAGEMENT PROGRAM
GREEN BUILDING CERTIFICATIONS
CLIENT’S APPRECIATION
www.ems-int.com
A systematic procedure directed towards in-depth analysis of the functions of systems, processes and building equipments to achieve :
• Optimized Design
• Construction Cost Reduction
• Operational Savings (energy & service charge) • Contribute to LEED Certification
• Engineering Solutions: avoid future potential operational issues
… offers clients optimized building designs with considerable cost savings
WHAT IS EVE?
www.ems-int.com
Construction & Financing Costs 25%
Operation & Maintenance Costs 75%
WHY EVE?
www.ems-int.com
Level of Design effort
Concept Design
Schematic Design
Detailed Design
Construction Documents
Construction
Occupancy
Capital & Energy Savings
WHEN EVE?
www.ems-int.com
1 - During Planning and Design StageReview, Comment and Reporting on the Following:
• Lighting (External, Internal, Emergency)
• Building Management System (BMS)
• Insulation
• Swimming Pool Heating & Cooling
• Car Park Lighting and Ventilation Design Review
• Grey Water Recycling
• Domestic Hot and Cold Water
• HVAC Control System
• Condensate Water Management
• Selection of HVAC Equipments
• Air Distribution System
• Chilled Water Distribution System
• HVAC Plant Sizing
EMS PROJECTS – FACTS & FIGURES
www.ems-int.com
1- During Planning and Design Stage cont.Review, Comment and Reporting on the
Following:
• Review Equipment Specification Recommendation & Financial Cost Analysis
• Review of Material Submittals, Equipment & Construction Technique
• Review of Tenders to Determine Compliance
2 - During Construction Stage: Verifying Implementation of Energy Related
Systems:
• Prediction of Yearly Energy & Water Consumption
• Metering
• Distribution Boards
• Stand-by Generators
• Power Factor Correction
• Transformers
ENERGY VALUE ENGINEERING
www.ems-int.com
• Supervision of commissioning & optimization of energy conservation equipments.
• Building Management System utilization
2 - During Construction Stage (Cont.): Verifying Implementation of Energy Related
Systems:
• Act as your Energy Consultant in every aspect related to Energy
• Reporting in the field of energy consumption
& conservation
• Recommending additional energy saving features
• Optimize the BMS system according to actual operating conditions
• Monitoring building's energy utilization
3 - Post construction: Fine tuning
ENERGY VALUE ENGINEERING
www.ems-int.com
Energy Savings>20% energy savings; >40% water savings
Construction Cost Savings • Reduced Electrical and Cooling loads
• Optimum size and # of MEP equipment
Maintenance cost reduction - due to higher equipment operational efficiency
Meeting Connected Load limits
Service Charge Calculation • More accurate• Lower
State of the Art Technology – Energy Management System and Energy Consuming Equipment of Latest Technology
Environmentally friendly project- Reduction in CO2 Emissions
Better Attraction to Investors
ENERGY EFFICIENCY IN NEW CONSTRUCTION PROJECTS
Client Benefits
www.ems-int.com
Highlights
• eQuest is based on the DOE Engine
• Accepted by USGBC for LEED Energy modeling
• HVAC, Lighting, Daylighting, Energy Analysis etc.
• Whole Building Energy Simulation Program [BESP]
• Distinguished for its daylight modeling capabilities
• Supporting the Energy Efficiency Measures
Cooling Load Calculations: HAP
Lighting Load Calculations: RELUX
Simulation: eQUEST
ENERGY EFFICIENCY IN NEW CONSTRUCTION PROJECTS
SIMULATION RESULTS
www.ems-int.com
19 Storey Hotel (500,000 sqm)
First three floors: Restaurants, Ball rooms, Lobbies,
Meeting rooms
15 Floors Guest rooms
Penthouse on roof
Simulation Process:
• Model created
• HVAC system
• Lighting and power systems optimized
• Simulate energy consumption pattern
Project Case study
www.ems-int.com
Options Energy Cost
Original Design Consumption27,860,000 kWh/Yr
9,193,800 AED/Yr
Optimized Design21,400,000 kWh/Yr
7,062,000 AEDS/Yr
Energy SavingsEnergy Cost Reduction
Capital Savings
2,131,800 kWh/Yr
2,330 ,460 AED/Yr
5,650,000 AED
MODEL BUILDING RESULTS
CASE STUDIES
www.ems-int.com
ENERGY VALUE ENGINEERING OF MEP DESIGNSCLIENT’S NAME:
EMAAR PJSC
PROJECT:Burj Dubai Development
BUILT UP AREA: 5 million m2
SCOPE OF SERVICES:Reviewing Concept design, material submittals, equipment and construction
techniques Estimating and comparing energy use for various system design choices Modeling of
the building energy systemIntroducing energy control and management systems
SAVINGS: Identified Capital Savings = AED 14 Million
Identified Operational Savings = AED 4 Million /Year
www.ems-int.com
AED 625,000 yearEnergy savings:
AED 5.7 millionCapital Savings:
Green Community – Dubai Investment Park
www.ems-int.com
Capital savings of AED 2.28 millionOperational savings of AED 3.0 million
DUBAI MARINA NORTH & SOUTH DEVELOPMENT / EMAAR
www.ems-int.com
Total Saving 24.6%
Energy Running Cost Savings USD 427,159
Initial Investment Reduction USD 192,680
AZIZIA PANDA HYPER-MARKET
www.ems-int.com
FEASIBILITY STUDY ON OWNERSHIP ON DISTRICT COOLING PLANT
CLIENT’S NAME:NORR Consultant
PROJECT:Shangri-la Hotel [ Two towers residential and hotel development]
SCOPE OF SERVICES:Comparative study District Cooling vs. Stand alone system
www.ems-int.com
GREEN SOLUTIONS / EVE
CLIENT’S NAME:NORR Consultant United Trading Est.
PROJECT:Jeddah Tower - KSA
SCOPE OF SERVICES:Reviewing concept design, material submittals,
equipment and construction techniquesEstimating and comparing energy use for various system design choices
Modeling of the building energy systemIntroducing energy control and management systems
www.ems-int.com
ENERGY VALUE ENGINEERING OF MEP DESIGNCLIENT’S NAME:ORECO OLAYAN.
PROJECT:Al-Bustan II Residential Resort
BUILT UP AREA:197,361 m2
SCOPE OF SERVICES:• Reviewing MEP design, and equipment specifications
Estimating and comparing energy use for various systems design choicesModeling of the building energy system
• Modeling of the building energy system
VALUE ADDITION:Reducing project installed power capacity from 22 MW to 15 MW
Reducing project cooling load from 10,659 RT to 7,000 RT
SMART PROPERTY SOLUTIONS
COMMISSIONING SOLUTIONS
ENERGY VALUE ENGINEERING
ENERGY MODELLING ENERGY DOCTOR CLEAN DEVELOPMENT
MECHANISMNATIONAL ENERGY
MANAGEMENT PROGRAM
GREEN BUILDING CERTIFICATIONS
CLIENT’S APPRECIATION
BUILDING ENERGY MODELING AND SIMULATION
Green and Sustainability Tools
www.ems-int.com
Buildings account for 1/3 of the world’s energy and materials consumption
Huge growth in global energy consumption expected as standards of living increase
40% of GHG emissions result from energy consumption in buildings
FACTS
www.ems-int.com
It’s the process of generating and managing building data during its life cycle
A computer program is used to calculate the design energy consumption, energy cost, design performance and the effect of any measure on the building performance
Its covers geometry, spatial relationships, light analysis, geographic information, quantities and properties of building components
WHAT IS ENERGY MODELING?
www.ems-int.com
Whole building energy modeling is quickly becoming an important part of smart design
This computer-age technique plays such an important part in green
design because of its speed, accuracy, and comprehensiveness
WHOLE BUILDING ENERGY SIMULATION
www.ems-int.com
You can predict the energy consumptionand saving before implementing the new policy or building modification by estimating the payback period or life cycle cost analysis
For LEED projects, you can compare the performance of the proposed design witha baseline design as per ASHRAE specification
WHY ENERGY MODELING
www.ems-int.com
You can predict the energy saving
during the building life cycle
Make your choices based on Knowledge and financial
considerations
Study the effect of each measure on the energy consumption
ENERGY MODELING: Creating an Energy Balance
www.ems-int.com
Economics
Early Collaboration
Parametric Modeling
Quality
Sustainability
BENEFITS SUMMARY
www.ems-int.com
Most of LEED rating systems follow the regulations in ASHRAE 90.1-Appendex G
ASHRAE is a widely used and accepted international standard
The applicable code or standard will depend on the country or the selected certificate
JURISDICTIONS
www.ems-int.com
Energy modeling is the only way to demonstrate compliance with the full point total of energy performance credits. This is the single largest point total of any LEED credit, with 19 points available
You can design without meeting the ASHRAE perspective requirement
To demonstrate improvement in the proposed building performance
LEED & ENERGY MODELING
www.ems-int.com
Cost, User interface, accuracy, 3D graphics are important factors to consider when measuring a software’s strengths and weaknesses
Many modeling tools are available on the market
As knowledge and technical capabilities have expanded, Energy modeling has become an integral aspect of design
ENERGY MODELING TOOLS
www.ems-int.com
Imagine a building energy simulation tool comprehensive enough to be useful to ALL design team members
eQUEST is a sophisticated, yet easy to use building energy use analysis tool which provides professional-level results with an affordable level of effort
www.ems-int.com
• Our LEED consulting team brings a positive and knowledgeable dynamic to
LEED projects. From LEED Design and Construction Guidance & Coordination
to building commissioning, LEED energy modeling, and ENERGY VALUE
ENGINEERING (EVE)
• EMS can ensure project teams achieve their LEED objectives
• We understand the requirements for project success
• Our Modelers have the knowledge to deal with different kinds of simulation software’s like Retscreen , PVSYST, Visual DOE
• EMS has worked on more than 100 LEED and energy modeling projects throughout the Middle East and North Africa
EMS & ENERGY MODELING
CASE STUDIES
www.ems-int.com
KING ABDULLAH FINANCIAL DISTRICT – PLOT 3.05
CLIENT’S NAME:Rayadah Investment Co.
PROJECT:2 Towers , 4 basements , 19 Floor
Mixed use , Residential and Commercial
BUILT UP AREA:78,000 m2
SCOPE OF SERVICES:LEED CS v 2
SAVINGS:18.2%
www.ems-int.com
WORLD HEALTH ORGANIZATION – AMMAN OFFICESCLIENT’S NAME:
World Health Organization
PROJECT:Office building
BUILT UP AREA:4,400 m2
SCOPE OF SERVICES:LEED CS v 2
SAVINGS:22.5%
www.ems-int.com
SABIC PLASTIC APPLICATION DEVELOPMENT CENTER (SPADC)
CLIENT’S NAME:Saudi Basic Industrial Corporation
PROJECT:Laboratories and offices
BUILT UP AREA:45,000 m2
SCOPE OF SERVICES:LEED NC v3
SAVINGS:22.8%
SMART PROPERTY SOLUTIONS
COMMISSIONING SOLUTIONS
ENERGY VALUE ANALYSIS
ENERGY MODELLING ENERGY DOCTOR CLEAN DEVELOPMENT
MECHANISMNATIONAL ENERGY
MANAGEMENT PROGRAM
GREEN BUILDING CERTIFICATIONS
CLIENT’S APPRECIATION
ENERGY DOCTOR
www.ems-int.com
Our Energy Dr. examines your home for energy efficiency and prescribes a list of cost effective improvements specific to your
home and lifestyle.
When you schedule a home energy audit visit, the Energy Doctor will conduct a quick survey of your home using advanced diagnostic testing equipment to determine where your energy
dollars are being wasted.
THE SERVICE
www.ems-int.com
Advise tenants of our valued clients on what can be done
To reduce the soaring energy bills
DOCTOR’S OBJECTIVE
www.ems-int.com
• Green healthy environment
• Affordable energy bills
• Lower service charges
• Low cost user friendly Smart tools
BENEFITS
SMART PROPERTY SOLUTIONS
COMMISSIONING SOLUTIONS
ENERGY VALUE ANALYSIS
ENERGY MODELLING ENERGY DOCTOR CLEAN DEVELOPMENT
MECHANISMNATIONAL ENERGY
MANAGEMENT PROGRAM
GREEN BUILDING CERTIFICATIONS
CLIENT’S APPRECIATION
Clean DevelopmentMechanism (CDM)
www.ems-int.com
The Clean Development Mechanism (CDM) is an arrangement under
the Kyoto Protocol allowing industrialized countries with a greenhouse
gas reduction commitment to invest in projects that reduce emissions
in developing countries as an alternative to more expensive emission reductions in their own countries.
WHAT IS CDM?
The CDM is supervised by the CDM Executive Board (CDM EB) and is under the guidance of the Conference
of the Parties (COP/MOP) of the United Nations Framework Convention on Climate Change (UNFCCC).
www.ems-int.com
Emissions trading is a way of introducing flexibility into a system where participants have to meet emissions targets.
These participants may be countries (as in the case of the Kyoto Protocol), or companies (as in the case of a domestic emissions trading scheme). Participants can buy units to cover any emissions above their targets, or sell units if they reduce their emissions below their targets.
The presence of a market for these units createsa value for emissions reductions which stimulates investment in the most cost-effective areas.
HOW DOES CARBON TRADING WORK?
www.ems-int.com
EMS, in collaboration with international companies assists organizations in the development of CDM projects by conducting all project cycle steps required for the participation in the Carbon Credits Program. EMS undertakes the following tasks:
Drafting the Project Information Note (PIN)
Investigating the CDM market and identifying the best buyers Initiating discussions and negotiations with buyersSecuring funding for the realization of the Project
Development Document (PDD) Drafting the PDD
Supporting buyers in securing project transaction.
DEVELOPMENT OF CLEAN DEVELOPMENT MECHANISM (CDM) PROJECT
SMART PROPERTY SOLUTIONS
COMMISSIONING SOLUTIONS
ENERGY VALUE ANALYSIS
ENERGY MODELLING ENERGY DOCTOR CLEAN DEVELOPMENT
MECHANISMNATIONAL ENERGY
MANAGEMENT PROGRAM
GREEN BUILDING CERTIFICATIONS
CLIENT’S APPRECIATION
NATIONAL ENERGY MANAGEMENT
PROGRAM
www.ems-int.com
EMS role:
The Concept:
Governments and Electric Utilities are committed to supply communities with their needs of electrical power. Billions of Dollars are usually invested to build new power stations to maintain security of supply in view of continues growth in electrical demands (3-7% annually).Daily and seasonal variations in demand are big challenges to governments and electric utilities to secure supplies and maintain profitabilityExample: Summer peaks due to air conditioning loads
• Analyze current electrical demand patterns• Determine the causes and contributions of peak loads• Determine peak load management measures and evaluate the
technical and economical feasibility of these measures• Design, implement and supervise Demand Side Management National
Programs• Evaluate success and effectiveness
DEMAND SIDE MANAGEMENT
www.ems-int.com
0
500
1000
1500
2000
2500
3000
3500
2004
2006
2008
2010
2012
2014
2016
2018
2020
2022
2024
Year
Cap
acit
y [M
W]
New CC 300New CC 300New CC 300New CC 300New CC 150New GT 100New GT 100RCCNSCCNS300R300S100CON2NG30C130REFINDCDFUHPTSTR100RISHGT30GA12GALLST66ST33DALLDemand + 20 %Demand
1999
2001
2003
2005
2007
2009
2011
2013
2015
2017
2019
2021
2023
2025
2027
2029
0
5000
10000
15000
20000
25000
0
5000
10000
15000
20000
25000
Demand and Load Forecast
Year
GW
h
MW
EMS role:
The Concept:
Different countries has different sources of available energy sources. Some of these energy sources are locally available and some are imported. In all cases, governments and energy authorities need to have an accurate information and analysis of their energy needs and forecasts of the future growth based on scientific analysis and tools.It is also important to have a diversity of energy sources to avoid local or international variations in energy markets, protect the local societies and economy from such variations and provide a reliable and a competitive energy prices necessary for growth and community
• Conduct surveys and data collection campaigns• Analyze all available options including renewable
energy• Conduct technical and economical feasibility
studies• Conduct environmental analysis• Study future forecasts• Develop energy master plans and strategies
ENERGY MASTER PLANNING
CASE STUDIES
www.ems-int.com
EMS CASE STUDYCLIENT’S NAME:
Saudi Arabia’s National Energy Efficiency Program [NEEP]
PROJECT:Energy Efficiency Information & Awareness
SCOPE OF SERVICES:Conducting market study over two years (2005-2007)
to provide NEEP with detailed studies on:• Energy Efficiency Market in KSA
• Information gaps among energy service industry and energy end users
• Financing mechanisms for energy efficiency projects• Energy efficiency database for KSA
• Energy saving potential in KSA• Recommended Awareness program and strategies
www.ems-int.com
NATIONAL ENERGY MASTER PLAN & STRATEGYCLIENT’S NAME:
World bank and Ministry of Energy and Mineral Resources (Jordan)
PROJECT:Jordan Energy Sector Master Plan
EMS ROLE:Local Consultant with the International Team
• Charles Rivers (UK)• COWI (Denmark)
SCOPE OF SERVICES:Task 1 – Energy Supply and Demand Analysis (COWI)
Task 2 – Energy Investment Requirements and Financing (COWI)Task 3 – Review of Jordan Petroleum Refinery (CRA)
Task 4 – Energy Pricing and Targeted Subsidies (CRA)Task 5 – Legal and Regulatory framework (CRA/Towers)
Task 6 – Environmental Study (COWI)Task 7 – Analysis of macro-economic impacts (CRA)
Task 8 – Formulation of Long-term energy sector strategy (CRA)
www.ems-int.com
RENEWABLE ENERGY CASE STUDY – WIND FARMS
CLIENT’S NAME:Ministry of Energy and Mineral Resources (MEMR)
The Government of The Hashemite Kingdom of Jordan
PROJECT:Feasibility Study on commercial wind farms
EMS ROLE:Local Consultant with the International Team
• COWI (Denmark)
SCOPE OF SERVICES:• Analyze 15 sites
• Conduct energy analysis• Determine possible capacity (MW)• Determine economical feasibility• Recommend best sites to build commercial wind farms in Jordan
www.ems-int.com
POWER STUDIES – TRANSMISSION LINESCLIENT’S NAME:
National Electric Power Company (NEPCO)
PROJECT:Feasibility Study of 400 kV Double Circuit Overhead Transmission
Line from Aqaba to Amman and Associated Substations
EMS ROLE:Local Consultant with the International Team
• Kuljian Corporation (USA)
SCOPE OF SERVICES:• Review of Available Information on Existing System
• Design of Transmission Line• Design of Substations
• System Studies
www.ems-int.com
NATIONAL ENERGY EFFICIENCY POTENTIALCLIENT’S NAME:
World bank and Ministry of Energy and Mineral Resources (Jordan)
PROJECT:Energy Audits for 19 Commercial and Industrial Enterprises (Jordan)
SCOPE OF SERVICES:The audits encompassed energy analysis, identification
of energy conservation measures and constraints toimplementation, full technical and economic evaluationof costs and benefits of energy conservation projects,
and recommendations of suitable energy saving measures together with the required investments.
SAVINGS:USD 2.38 Million
SOME OF EMS PROJECTS – FACTS&FIGURES:
CLIENT’S NAME:Bahrain Energy Efficiency Program
PROJECT:Development and Implementation of DSM programs in the State of Bahrain.
SCOPE OF SERVICES:Energy Management Services performed Energy Auditing Services and Housing Surveys under a National Energy Efficiency Program for various types of facilities throughout the Kingdom of
Bahrain.Each report was concluded with a recommendation of the most interesting and applicable
measures, a summary table and a forecasted year table.The housing surveys focused on identifying highest consumer segments, usage and energy efficiency of existing appliances, awareness and developed and tested appropriate labelling
standards that could influence purchasing decisions based on energy efficiency of appliances.
SMART PROPERTY SOLUTIONS
COMMISSIONING SOLUTIONS
ENERGY VALUE ANALYSIS
ENERGY MODELLING ENERGY DOCTOR CLEAN DEVELOPMENT
MECHANISMNATIONAL ENERGY
MANAGEMENT PROGRAM
GREEN BUILDING CERTIFICATIONS
CLIENT’S APPRECIATION
CLIENTS’ APPRECIATION
CLIENTS’ APPRECIATION
Mahdi Maki - Head of Design – Energy City Qatar (ECQ)- EMS has always handled my questions & concerns in a timely fashion, and I pleased with their performance.�
El Seif Engineering - The concept of Green Building was very new to the Construction Industry of KSA, EMS played a leading role to develop and educate this sector and finally implemented the green concepts in our region. The sustainability conferences and technical workshops arranged in this regard were very informative. EMS provides great technical support to in achieving their Green Certificate targets in KAFD.
Simon E, Azzam - General Manager - Union Properties. We have no hesitation in recommending Energy Management Services to any organization seeking energy savings at design stage or to existing facilities. EMS results in Energy savings are in line with those they predicted.
AmjadHarb - Head of Architects - CICO Consulting.– When it comes to green solutions, EMS has an excellent team, we can count on their support.
Nicolas Jarrouj - Head of Architects - MZ &Partners.EMS, as a local company, is the best provider of green solutions in the GCC.�
Eng. UsamaAlami - General Manager - Jordan paper and Cardboard factories Co. The outcomes of the audit were so good and exceeded the expected results. We highly appreciate EMS team for their professional work and excellent results achieved. 19.5% of the company energy bills was reduced with a 21 months project payback.
Patrick Weston – Property Services Manager - Emirates/Dnata. The results [of the energy audit] produced an overall reduction in energy consumption of 27%. We shall continue to use their services in the future in existing and future facilities and would not hesitate to recommend their service to others.
Nidal M. Ahmad - Arab Aluminium Industry Co. Ltd - Based upon the energy pre-audit and then the final audit carried out by EMS, our company is now negotiating the implementation. We confirm that up to date EMS efforts indicate professionalism and we have no reservation to recommend EMS to such type of work.
CLIENTS’ APPRECIATION
www.ems-int.com
www.ems-int.com
JORDAN OFFICE
P.O. Box 2457, Amman 11953, JordanTel No. + 962 6 5538085Fax No. + 962 6 5539097
UNITED ARAB EMIRATES
Liberty Bldg. Office 303Al Garhoud, Dubai,U.A.E.P.O. Box 31411Tel No: + 971 4 282 7000 Fax : + 971 4 282 7001 [email protected]
SAUDI OFFICE
esco, Riyadh, Saudi ArabiaTel No. + 966 11263 8900 Ext.1318Fax No.+ 974 11263 [email protected]
