The IEPC-100 with a rugged video camera is designed to work
with: ACOG Nightforce Leupold , Schmidt & Bender and others
combat riflescopes It can be easily attached behind any military
scopes to ensure that every round is on target (pin-point accuracy)
to ultimately suppress enemies faster, reduce collateral damages,
and conserve ammunitions. The IEPC-100 with a see-through lens,
snipers or war fighters can operate their rifles normally. At the
same time, it offers shooters additional protection and safety by
minimizing body exposure during engagement with enemies. It is
developed to minimize casualties! Users of the IEPC-100 are not
required to position their bodies behind the sight. It converts any
rifles into corner shot rifles just by installing the EyePiece
camera Using a Helmet Mounted Display (HMD), shooters can quickly
acquire targets, and deliver firepower with pinpoint accuracy
boosting shooters confidence in the field.
Slide 3
Camera with a Dot Sight
Slide 4
Micro-bullet D&N camera Main Components 2 m Urethane cable
with connector (Connect to Main control Box/MCX-100-FR ) Camera
attaching screw Eyepiece holder (silicon ) Body Scope adaptor
mounting screw Large prism for wide field of view and eye relief
Scope-Adaptor
Slide 5
Eyepiece Camera Main Control Box (DC15V/2.6A Battery pack) HMD
(Optional) HMD Control Box (On-Off, Brightness. Right-Left) Main
Components (training configuration )
Slide 6
Eyepiece Cam Rubber Eye piece Cup IntelOptix EyePiece cam will
come with multiple adapters to allow an easily installation on
various military scopes.
Slide 7
Right hand Left hand
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Control Box (6) Camera JACK (3) DC Jack (4) Menu Button
(Waterproof type) (7) HMD Monitor Jack (5) BNC Jack (Video Out) (8)
3-water proof caps. (DC Jack, Camera Jack, Monitor Jack) (1)Rotary
s/w (Water- proof type) (C: Charge, D: Day, N: Night) (2) LED Lamp
(3) DC Jack
Slide 13
Control Box CX 100-FR Optional Fog /Haze filter Main control
Box with image Enhancer to filter out fog, haze,smoke, rain &
boost-up image quality at Day & Night) MCX-100-FR
Slide 14
DVR for Recording LCD displayHMD
Slide 15
Control Box HMD InterEyePiece Camera
Slide 16
Instructor Station DVR
Slide 17
Instructor display Any sniper training sessions can be recorder
for debriefing Leupold Riflescope
Slide 18
Corner shots Converts any rifles into corner shot rifles just
by installing the IEPC-100 Allows its operator to both see and
engage threats, without exposing the operator to counterattack.
Extra protection Soldiers build obstacles such as walls, sandbags,
or other objects that provide protection from enemy fire power but
require them to expose themselves to enemy fires when operating
machineguns or rifles. By installing the IEPC-100 with a HMD,
soldiers can stay below protection of sandbags or bunkers and still
engage targets effectively without exposing operators to
counterattacks. The IntelliOptix EyePiece cam, will save lives!!!
VS. X
Slide 19
Other optical devices Convert any spotting scopes, binoculars,
night vision devices thermal sights, rangefinders, target
designators, periscopes etc.. into a remote observation system just
by installing the IEPC-100 for tactical or training mission
IEPC-100 allows war fighters to operate their optical devices
normally with a see-through-view. Highly rugged and portable!! Easy
to install !!!
Slide 20
Rugged large prism with micro bullet Day & Night
camera(IP66) - Good eye relief through the use of a large prism
lens optical block (patent pending) - Included 2 m Urethane cable
with connector (IP66) - Family of Main Control Box with image
Enhancer to filter out fog, haze, smoke, rain & boost-up image
quality at Day & Night( MCX-100-FR) 1/3 SONY Super-HAD II CCD
micro bullet D&N camera (410K pixels, 600TV lines) Day- 0.04Lux
true color/ Night -0.001Lux by true color IR filter Digital WDR /
2DNR / HLC selectable(Optional) Smart IR compensation to take good
image at night with strong IR illuminated areas Horizontal Mirror
image / Blemish Compensation Rugged & Weatherproof Metal case
(IP66) Very Low Power Consumption (70mA Max.) DC12V/70mA (0.84W)
Dimensions: 50paix44(H)x110(L)mm Weight: 0.24Kgs(0.53lb)